North America UniGroup Too Includes UniGroup

UniGroup® Too

Includes UniGroup® and PLACES®

North America UniGroup Too Price List — April 2008



This Haworth North American price book contains US list prices.



Canadian customers can convert the US list price into their Canadian equivalent by going to www.Haworth.com/Canada to find the current Canadian multipliers. These multiplier factors allow you to convert the US list price into a Canadian list price.

UniGroup Too Price List

Table of Contents

950 Series Attached Base Conversion Kit . . . . . . . . . . . . . . . . . . . . . . . . . . 353 Attached Conversion Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 353 Attached Drawer Pedestal — File/File . . . . . . . . . . . . . . . . . . . 347 Attached Drawer Pedestal — Pencil/Box/EDP . . . . . . . . . . . . 348 Attached Pedestal — Box/Box/Box/Box . . . . . . . . . . . . . . . . . . 347 Attached Pedestal — Box/Box/File . . . . . . . . . . . . . . . . . . . . . . 346 Attached Pedestal — Box/Box/File — Wood Front . . . . . . . . 338 Attached Pedestal — File/File — Wood Front . . . . . . . . . . . . 338 Attached Pedestal — Pencil/Pencil/Box/File . . . . . . . . . . . . . . 346 Compressor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 364 Counterweight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 341, 355, 365 Dividers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 364 Five-High . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 361 Four-High . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 360 Freestanding Base Conversion Kit . . . . . . . . . . . . . . . . . . 341, 355 Freestanding Conversion Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . 353 Freestanding Pedestal — Box/Box/File . . . . . . . . . . . . . . . . . . 351 Freestanding Pedestal — Box/Box/File — Wood Top and Front . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 340 Freestanding Pedestal — File/File . . . . . . . . . . . . . . . . . . . . . . . 352 Freestanding Pedestal — File/File — Wood Top and Front . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 340 Freestanding Pedestal —Pencil/Box/EDP . . . . . . . . . . . . . . . . 352 Freestanding Pedestal — Pencil/Box/File . . . . . . . . . . . . . . . . 351 Freestanding Pedestal — Pencil/Box/File — Wood Top and Front . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 340 Freestanding Pedestal — Pencil/Pencil/Box/File . . . . . . . . . . 351 Front-to-Back Hanging Bars . . . . . . . . . . . . . . . . . . . . . . . . . . . . 365 Heavy Loading Counterweight . . . . . . . . . . . . . . . . . . . . . 341, 355 Hinged Door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 357, 358 Lateral File Lockbar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 365 Mobile Caster Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 341, 355 Mobile Conversion Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 354 Mobile Pedestal — Box/Box/File . . . . . . . . . . . . . . . . . . . . . . . . 349 Mobile Pedestal — Box/Box/File — Wood Top and Front . . 339 Mobile Pedestal — File/File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 350 Mobile Pedestal — File/File — Wood Top and Front . . . . . . 339 Mobile Pedestal — Pencil/Box/EDP . . . . . . . . . . . . . . . . . . . . . 350 Mobile Pedestal — Pencil/Box/File . . . . . . . . . . . . . . . . . . . . . . 349 Mobile Pedestal — Pencil/Box/File — Wood Top and Front . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 339 Mobile Pedestal — Pencil/Pencil/Box/File . . . . . . . . . . . . . . . . 349 Pedestal Drawer Lock Conversion Kit . . . . . . . . . . . . . . . . . . . 356 Pencil Tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 356 Reference Tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 356 Side Bookcase . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 357, 358 Side-to-Side 6′′(152mm) Drawer Divider . . . . . . . . . . . . . . . . . 356 Side-to-Side Hanging Bars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 364 Single Top, Laminate Surface — Radius or Square Edge . . 363 Single Top, Wood Surface with Wood Trim — Radius or Square Edge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 363 Stationery Organizer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 356 Stationery Organizer Divider . . . . . . . . . . . . . . . . . . . . . . . . . . . . 356 Suspended Pedestal — Box/Box/Box . . . . . . . . . . . . . . . . . . . . 342 Suspended Pedestal — Box/Box/Box — Wood Front . . . . . 336 Suspended Pedestal — Box/Box/File . . . . . . . . . . . . . . . . . . . . 344 Suspended Pedestal — Box/Box/File — Wood Front . . . . . . 337 Suspended Pedestal — Box/File . . . . . . . . . . . . . . . . . . . . . . . . 342 Suspended Pedestal — Box/File — Wood Front . . . . . . . . . . 336 Suspended Pedestal — File/File . . . . . . . . . . . . . . . . . . . . . . . . 344 Suspended Pedestal — File/File — Wood Front . . . . . . . . . . 337 Suspended Pedestal — Pencil/Box/EDP . . . . . . . . . . . . . . . . . 345 Suspended Pedestal — Pencil/Box/File . . . . . . . . . . . . . . . . . . 343 Suspended Pedestal — Pencil/Box/File — Wood Front . . . . 336 Suspended Pedestal — Pencil/Pencil/Box/File . . . . . . . . . . . 343 Translucent Tower Top . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 358 Three-High . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 360

Two-High . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 359, 362 Two-High With Counterweight . . . . . . . . . . . . . . . . . . . . . . 359, 362

Adaptable Upper Storage Corner Mini Shelf, Standard Mount . . . . . . . . . . . . . . . . . . . . . . Open Shelf, Standard Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . Overhead Storage Unit / Shelf Gang Clip . . . . . . . . . . . . . . . . Overhead Storage Unit, Standard Mount — Painted, Translucent or Wood Front . . . . . . . . . . . . . . . . . . . . . . . . . . . Overhead Storage Unit, Up Mount — Painted, Translucent or Wood Front . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Straight Mini Shelf, Standard Mount . . . . . . . . . . . . . . . . . . . . .

267 264 264 265 266 267

Adaptable Wall Mount Components Back for Wall Mounted Overhead Storage Unit . . . . . . . . . . . Tackboard Wall Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Wall Mounted Overhead Storage Unit, Painted or Wood Fronts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Worksurface/Worksurface Support Panel to Wall Bracket . .

275 275 274 275

Adaptable Worksurfaces — Laminate 90° Merger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120° Link . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Bent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Conference End . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Corner, 90° Angled . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Corner, 90° Angled Transitional . . . . . . . . . . . . . . . . . . . . . . . . . Corner, 90° Notched . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Corner, 90° Notched Extended . . . . . . . . . . . . . . . . . . . . . . . . . . Corner, 90° Notched Transitional . . . . . . . . . . . . . . . . . . . . . . . . Corner, 90° Split Top . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Corner, 90° Straight Front . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Corner, 90° Wrap-Around . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Corner, 90° Wrap-Around Extended . . . . . . . . . . . . . . . . . . . . . Corner, 90° Wrap-Around Transitional . . . . . . . . . . . . . . . . . . . Corner, 90° Wrap-Around Transitional Extended . . . . . . . . . . Corner, 120° Wrap-Around . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Countertop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-Shaped Convergent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-Shaped Convergent, Wrap-Around . . . . . . . . . . . . . . . . . . . . D-Shaped Ender . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Key Conference End . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Rectangular . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Rectangular Convergent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Rectangular Inverse Swell . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Rectangular Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Rectangular Radius End . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Rectangular — Split Top . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Rectangular Swell . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Rectangular Transition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Wedge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

199 211 207 209 187 190 186 194 189 191 184 185 192 188 196 200 208 201 204 206 210 174 202 179 177 182 183 178 180 181

Adaptable Worksurfaces — Wood 90° Merger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120° Link . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Bent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Conference End . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Corner, 90° Angled . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Corner, 90° Angled Transitional . . . . . . . . . . . . . . . . . . . . . . . . . Corner, 90° Notched . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Corner, 90° Notched Extended . . . . . . . . . . . . . . . . . . . . . . . . . . Corner, 90° Notched Transitional . . . . . . . . . . . . . . . . . . . . . . . . Corner, 90° Split Top . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Corner, 90° Straight Front . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Corner, 90° Wrap-Around . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Corner, 90° Wrap-Around Extended . . . . . . . . . . . . . . . . . . . . . Corner, 90° Wrap-Around Transitional . . . . . . . . . . . . . . . . . . . Corner, 90° Wrap-Around Transitional Extended . . . . . . . . . .

236 246 242 244 225 228 224 232 227 229 222 223 230 226 234

April 2008 / USA

3

UniGroup Too Price List

Table of Contents

Corner, 120° Wrap-Around . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Countertop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-Shaped Convergent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-Shaped Convergent, Wrap-Around . . . . . . . . . . . . . . . . . . . . D-Shaped Ender . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Key Conference End . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Rectangular . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Rectangular Convergent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Rectangular Inverse Swell . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Rectangular Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Rectangular Radius End . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Rectangular — Split Top . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Rectangular Swell . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Rectangular Transition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Wedge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

237 243 238 240 241 245 212 239 217 215 220 221 216 218 219

Clerestory Kits 2-Way Connector Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-Way Connector Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-Way Connector Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . End Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Straight Track Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

145 145 145 145 145

Electrical and Cable Management Base Feed Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 161 Base Feed Module — Concealed Flatwire Connection — 3-Circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157 Base Feed Module — Concealed Hardwire Connection — 3-Circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157 Base Feed Module — Concealed Hardwire Connection — 6-Circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157 Base Feed Module — Hardwire Connection — 6-Circuit . . . 157 Base Raceway End Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165 Chicago Ported Panel Cover Plates . . . . . . . . . . . . . . . . . . . . . 169 Communication Junction Box . . . . . . . . . . . . . . . . . . . . . . . . . . . 165 Connector Assembly — 12′′ Pass-Through . . . . . . . . . . . . . . 163 Desktop Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170 Dual Power Access Raceway Kit — 4′′-High Base Raceway . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 161 Expanded Top Cap Raceway . . . . . . . . . . . . . . . . . . . . . . . . . . . 167 Expanded Top Finish Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167 Extended Power Connector — Long Width . . . . . . . . . . . . . . . 164 Extended Power Connector — Medium Width . . . . . . . . . . . . 164 Extended Power Connector — Short Width . . . . . . . . . . . . . . 164 Flexible Power Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163 Flip Top Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171 PLACES Cable Management Pole — For 10′(3048mm)-High Ceiling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153 PLACES Cable Management Pole — For 12′(3658mm)-High Ceiling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154 PLACES Cable Management Pole — Panel Height . . . . . . . 153 PLACES Cable Management Post — Variable Height — In-Line — Fabric or Painted Surface . . . . . . . . . . . . . . . . . . . 155 PLACES Cable Management Post — Variable Height — Three-Way 90° — Fabric or Painted Surface . . . . . . . . . . . 155 PLACES Cable Management Post — Variable Height — Three-Way 180° — Fabric or Painted Surface . . . . . . . . . . 155 PLACES Cable Management Post — Variable Height — Two-Way 90° — Fabric or Painted Surface . . . . . . . . . . . . . 155 PLACES Top Feed Module — 3-Circuit 10′ Ceiling Height . 150 PLACES Top Feed Module — 3-Circuit 12′ Ceiling Height . 150 PLACES Top Feed Module — 6-Circuit 10′ Ceiling Height . 151 Ported Panel Cover Plates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168 Ported Raceway Covers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160 Power Breaker Marker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 159 Power Receptacle — Duplex . . . . . . . . . . . . . . . . . . . . . . . . . . . 161 Power Receptacle — Isolated Ground Duplex . . . . . . . . . . . . 161 Power Receptacles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158

4

April 2008 / USA

Power/Data Dome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172 Raceway Retrofit Kits — 3-Circuit . . . . . . . . . . . . . . . . . . . . . . . 159 Raceway Retrofit Kits — Powered — 6-Circuit . . . . . . . . . . . . 159 Straight-Span Power Connector . . . . . . . . . . . . . . . . . . . . . . . . . 163 UniGroup Too Top Feed Module — 3-Circuit 10′ Ceiling Height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146 UniGroup Too Top Feed Module — 3-Circuit 12′ Ceiling Height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146 UniGroup Too Top Feed Module — 6-Circuit 10′ Ceiling Height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147 UniGroup Too, UniGroup and PLACES Base Feed Module (Canada) — Plug Connection — 1-Circuit . . . . . . . . . . . . . . 156 UniGroup Too, UniGroup and PLACES Base Feed Module — Hardwire Connection — 3-Circuit . . . . . . . . . . . . . . . . . . . . . . 156 UniGroup Too, UniGroup and PLACES Base Feed Module — Plug Connection — 1-Circuit . . . . . . . . . . . . . . . . . . . . . . . . . . 156 UniGroup Too, UniGroup and PLACES Raised Floor Base Feed Module — 3-Circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156 UniGroup Too, UniGroup, PLACES Chicago Hardwire / International Top Feed Module . . . . . . . . . . . . . . . . . . . . . . . . 162 UniGroup Too/UniGroup Cable Management Pole — One Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152 UniGroup Too/UniGroup Cable Management Pole — Two Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152 UniGroup Top Feed Module — 3-Circuit 10′ Ceiling Height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148 UniGroup Top Feed Module — 3-Circuit 12′ Ceiling Height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148 UniGroup Top Feed Module — 6-Circuit 10′ Ceiling Height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149 Vertical Wire Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166 Vertical Wire Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166 Worksurface Grommet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172

Jump Stuff Binder Bin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 281 File Master Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 284, 289 Freestanding Mount Rail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 287 Gooseneck Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 281 Letter Tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 283 Letter Tray Stacking Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . 285 Letter Tray Stacking Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 285 Mini Master Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 284, 290 Mini Shelf . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 281 Panel Mount Rail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 286 Paper Sorter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 282, 288 Personal Shelf . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 282, 288 Personal Shelf Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 282 Phone Shelf . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 282, 288 Phone Shelf Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 282 Pile Master Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 288 Tack Strip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 281 Task Master Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 284, 289 Team Master Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 289 Tool Cup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 283 Tote Strap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 285 Wall Mount Rail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 287 Waste Bin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 285 Worksurface Mount Rail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 286 Tote . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 281

Lighting Adaptable Electronic Ballast Task Light . . . . . . . . . . . . . 276, 295 Adaptable Electronic Ballast Task Light (Add-On Light) . . . . 277 Adaptable Electronic Ballast Task Light (Starter Light) . . . . . 277 Freestanding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 297 Grid-Mount Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 298 Grid-Mounted . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 297

UniGroup Too Price List

Table of Contents

BRAZO™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Panel-Hung . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Panel-Hung Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Wing Light — Freestanding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Wing Light — Panel Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Wing Light — Rail Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Wing Light — Under Shelf Mount . . . . . . . . . . . . . . . . . . . . . . .

295 297 298 296 296 296 296

Markerboards/Wall Accessory Slat Pad Markerboard — Magnetic Surface . . . . . . . . . . . . . . . . . . . . . . . 280 Markerboard — Non-Magnetic Surface . . . . . . . . . . . . . . . . . . 280 Wall Accessory Slat Pad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 280

Mini Shelves Corner Mini-Shelf . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 268 Straight Mini-Shelf . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 268

OneTouch Overhead Storage Unit OneTouch Gang Clip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 269 Overhead Storage Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 269

Panel Accessories – Retrofit Kits 90° Full-Height Finish Post — Square Painted Top Cap . 40, 45 90° Variable-Height Finish Post — Square Painted Top Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40, 45 120° Full-Height Finish Post — Square Painted Top Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41, 46 120° Variable-Height Finish Post — Square Painted Top Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41, 46 180° Full-Height Finish Post — Square Painted Top Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42, 47 180° Variable-Height Finish Post — Square Painted Top Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43, 48 Square Painted Top Caps . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39, 44 Trim Strip for UniGroup Fabric and Glazed Add-On Panels . 39

PLACES Panels & Connectors 2/90 Sign Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143 90° Finish Post — Low Profile Steel Top Cap — Fabric Surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133 90° Finish Post — Low Profile Steel Top Cap — Painted Surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134 90° Finish Post — Low Profile Wood Top Cap — Fabric Surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133 90° Finish Post — Low Profile Wood Top Cap — Wood Surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133 90° Low Profile Wood Top Cap for 2-Way . . . . . . . . . . . . . . . . 139 90° Low Profile Wood Top Cap for 4-Way . . . . . . . . . . . . . . . . 139 90° Power Connector Cover — Radius Profile . . . . . . . . . . . . 134 120° Finish Post — Low Profile Steel Top Cap — Fabric Surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134 180° Finish Post — Low Profile Steel Top Cap— Fabric Surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135 180° Finish Post — Low Profile Steel Top Cap— Painted Surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135 180° Finish Post — Low Profile Wood Top Cap — Fabric Surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135 180° Finish Post — Low Profile Wood Top Cap — Wood Surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134 180° Low Profile Wood Top Cap for 3-Way . . . . . . . . . . . . . . . 139 180° Power Connector Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . 135 All-Purpose Hook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143 All-Purpose Hook — For Low Profile Wood Top Cap Panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143 Basic Monolithic Fabric Panel with Low Profile Steel Top Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108 Basic Monolithic Fabric Panel with Low Profile Wood Top Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90

End-of-Run Finish Post — Low Profile Steel Top Cap — Fabric Surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136 End-of-Run Finish Post — Low Profile Wood Top Cap — Fabric Surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136 End-of-Run Finish Post — Low Profile Wood Top Cap — Wood Surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136 End-of-Run Finish Post — Wood Top Cap . . . . . . . . . . . . . . . 140 End-of-Run Variable Height Finish Post — Coped — Low Profile Wood Top Cap — Fabric Surface . . . . . . . . . . . . . . . 137 End-of-Run Variable Height Finish Post — Coped — Low Profile Wood Top Cap — Wood Surface . . . . . . . . . . . . . . . 137 End-of-Run Variable Height Finish Post — Regular — Low Profile Wood Top Cap — Fabric Surface . . . . . . . . . . . . . . . 138 End-of-Run Variable Height Finish Post — Regular — Low Profile Wood Top Cap — Wood Surface . . . . . . . . . . . . . . . 138 Friction Pad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143 Full Height Side Trim Rail – for use with Add-On Panels . . . 141 Glazed Monolithic Panel with Low Profile Wood Top Cap . . 102 Glazed Monolithic Panels with Low Profile Steel Top Cap . 122 High-Performance Monolithic Fabric Panel/Low Profile Steel Top Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110 Hinges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141 if Panel Attached Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130 In-Line Low Profile Wood Top Cap . . . . . . . . . . . . . . . . . . . . . . 139 Low Profile Steel Top Cap for 3-Way and 4-Way . . . . . . . . . 140 Low Profile Wood Top Cap Kit . . . . . . . . . . . . . . . . . . . . . . . . . . 139 Monolithic Fabric Add-On Panel . . . . . . . . . . . . . . . . . . . . . . . . . 124 Monolithic Fabric Panel with Low Profile Steel Top Cap . . . 106 Monolithic Fabric Panel with Low Profile Wood Top Cap . . . . 88 Monolithic Glazed Add-On Panel . . . . . . . . . . . . . . . . . . . . . . . . 126 Monolithic Wood Panel with Low Profile Wood Top Cap . . . . 82 Monolithic Wood/Fabric Panel with Low Profile Wood Top Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84 Muntin Kit — Classic — Painted . . . . . . . . . . . . . . . . . . . . . . . . 131 Muntin Kit — Horizontal — Painted . . . . . . . . . . . . . . . . . . . . . . 131 Open Frame Monolithic Panel with Low Profile Steel Top Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120 Open Frame Monolithic Panel with Low Profile Wood Top Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 Panel Bridge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141 Ported Monolithic Fabric Panel with Low Profile Steel Top Cap — Four Ports, Two Each Side . . . . . . . . . . . . . . . . . . . . 118 Ported Monolithic Fabric Panel with Low Profile Steel Top Cap — One Port Each Side . . . . . . . . . . . . . . . . . . . . . . . . . . . 114 Ported Monolithic Fabric Panel with Low Profile Steel Top Cap — One Port Right or Left . . . . . . . . . . . . . . . . . . . . . . . . . 112 Ported Monolithic Fabric Panel with Low Profile Steel Top Cap — Two Ports, Same Side . . . . . . . . . . . . . . . . . . . . . . . . 116 Ported Monolithic Fabric Panel with Low Profile Wood Top Cap — Four Ports, Two Each Side . . . . . . . . . . . . . . . . . . . . . 98 Ported Monolithic Fabric Panel with Low Profile Wood Top Cap — One Port Each Side . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94 Ported Monolithic Fabric Panel with Low Profile Wood Top Cap — One Port Right or Left . . . . . . . . . . . . . . . . . . . . . . . . . . 92 Ported Monolithic Fabric Panel with Low Profile Wood Top Cap — Two Ports, Same Side . . . . . . . . . . . . . . . . . . . . . . . . . 96 Seismic Anchoring Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143 Side Trim Rail With Notch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141 Single Door — Glazed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128 Single Door — Glazed with Classic Muntins . . . . . . . . . . . . . . 129 Single Door — Glazed with Horizontal Muntins . . . . . . . . . . . 129 Single Door — Laminate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128 Single Door — Wood . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104 T-Mount Kit — Center and End Conditions . . . . . . . . . . . . . . . 142 Wainscot Kit Painted Rail — Fabric Panel . . . . . . . . . . . . . . . . 132 Wainscot with Classic Muntins Painted — Rail and Muntins — Fabric Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132

April 2008 / USA

5

UniGroup Too Price List

Table of Contents

Wainscot with Horizontal Muntins — Painted Rail and Muntins — Fabric Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132 Wall Mount Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142 Wall Track . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142

PLACES Shelves/Flipper Doors/Overhead Storage Low Shelf — Painted . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Regular Flipper Door Front — Fabric or Laminate . . . . . . . . . Regular Overhead — Painted Case — Wood Door Front — Wood Pull . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Regular Shelf — Painted . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

271 272 272 271

Shelf Accessories Adaptable/OneTouch Shelf Dividers . . . . . . . . . . . . . . . . . . . . . UniGroup/PLACES Shelf Back Guard . . . . . . . . . . . . . . . . . . . UniGroup/PLACES Shelf Dividers . . . . . . . . . . . . . . . . . . . . . . . Wall Track . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

273 273 273 273

Tables Laminate C-Leg Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 367 Laminate Oval Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 366 Laminate Rectangular Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . 366 Laminate Round Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 366 Laminate Square Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 366 Sit-to-Stand Corner — Laminate — T-Mold Edge . . . . 368, 370 Sit-to-Stand Curved Corner — Laminate — T-Mold Edge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 369, 371 Sit-to-Stand Rectangular — Laminate — T-Mold Edge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 368, 370 Sit-to-Stand Split Corner — Laminate — T-Mold Edge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 369, 371

Tack Strips/Tackboards Tack Strip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tack Strip — Monolithic High-Performance Acoustical Panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tackboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tackboard — Monolithic High-Performance Acoustical Panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

278 279 278 279

Task Organization Diagonal Unit — Freestanding . . . . . . . . . . . . . . . . . . . . . . . . . . Diagonal Unit — Suspended . . . . . . . . . . . . . . . . . . . . . . . . . . . . Horizontal Unit — Freestanding . . . . . . . . . . . . . . . . . . . . . . . . . Horizontal Unit — Suspended . . . . . . . . . . . . . . . . . . . . . . . . . . . Paper Management Mounting Bar . . . . . . . . . . . . . . . . . . . . . . . Paper Management Tray Packages . . . . . . . . . . . . . . . . . . . . . Vertical Unit — Freestanding . . . . . . . . . . . . . . . . . . . . . . . . . . . Vertical Unit — Suspended . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

293 293 294 293 293 294 294 294

UniGroup Panels & Connectors 2/90 Sign Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90° Finish Post — Radius Steel Top Cap— Fabric Surface . 90° Finish Post — Radius Steel Top Cap— Painted Surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90° Finish Post — Radius Wood Top Cap— Fabric Surface . 90° Power Connector Cover — Radius Profile . . . . . . . . . . . . . 90° Top Cap for 2-Way and 3-Way — Radius Wood Top Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90° Top Cap for Radius Wood Top Cap — Wood Surface . . 120° Finish Post — Radius Steel Top Cap — Fabric Surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180° Finish Post — Radius Steel Top Cap — Fabric Surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180° Finish Post — Radius Steel Top Cap — Painted Surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180° Finish Post — Radius Wood Top Cap — Fabric Surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6

April 2008 / USA

80 73 73 73 73 77 77 74 75 75 75

180° Power Connector Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 All-Purpose Hook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 Basic Monolithic Panel with Radius Steel Top Cap . . . . . . . . . 56 End-of-Run Finish Post — Radius Wood Top Cap — Wood Surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76 End-of-Run — Variable Height Finish Post Coped End — Radius Wood Top Cap — Wood Surface . . . . . . . . . . . . . . . . 76 Friction Pad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 Full-Height Side Trim Rails — for use with Add-On Panels . . 78 Glazed Monolithic Panel with Radius Steel Top Cap . . . . . . . 62 Glazed Monolithic Panel with Radius Wood Top Cap . . . . . . . 52 Hinges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 if Panel Attached Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 Laminate Monolithic Panel with Radius Steel Top Cap . . . . . 58 Monolithic Fabric Add-On Panel . . . . . . . . . . . . . . . . . . . . . . . . . . 64 Monolithic Glazed Add-On Panel . . . . . . . . . . . . . . . . . . . . . . . . . 66 Monolithic Panel with Radius Steel Top Cap . . . . . . . . . . . . . . . 54 Monolithic Panel with Radius Wood Top Cap . . . . . . . . . . . . . . 50 Open Frame Panel with Radius Steel Top Cap . . . . . . . . . . . . 60 Painted Muntin Kit — Classic . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71 Painted Muntin Kit — Horizontal . . . . . . . . . . . . . . . . . . . . . . . . . . 71 Pre-hinged Side Trim Rails — Angled or Straight-Line Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81 Radius Steel Top Cap for 3-Way and 4-Way . . . . . . . . . . . . . . 77 Radius Wood Top Cap Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 Seismic Anchoring Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 Side Trim Rail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 Single Door — Glazed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69 Single Door — Glazed with Classic Muntins . . . . . . . . . . . . . . . 69 Single Door — Glazed with Horizontal Muntins . . . . . . . . . . . 129 Single Door — Laminate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68 Single Door with ADA Lever and Kick Plate — Laminate . . . 68 T-Mount Kit — Center and End Conditions . . . . . . . . . . . . . . . . 79 Wainscot Kit Painted Rail — Fabric Panel . . . . . . . . . . . . . . . . . 72 Wainscot with Classic Muntins Painted — Rail and Muntins — Fabric Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72 Wainscot with Horizontal Muntins — Painted Rail and Muntins — Fabric Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72 Wall Mount Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 Wall Track . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79

UniGroup Shelves and Flipper Doors Low Shelf . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 270 Regular Flipper Door Front — Fabric or Laminate Door Front . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 270 Regular Shelf . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 270

UniGroup Too Panels & Connectors 2/90 Sign Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90° Full-Height Finish Post — Square Painted Top Cap . . . . 90° Power Connector Cover — Square Profile . . . . . . . . . . . . . 90° Square Painted Top Cap for 2-Way, 3-Way, 4-Way . . . . 90° Variable-Height Finish Post — Square Painted Top Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120° Full-Height Finish Post — Square Painted Top Cap . . . 120° Power Connector Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120° Square Painted Top Cap for 2-Way or 3-Way . . . . . . . . . 120° Variable-Height Finish Post — Square Painted Top Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180° Full-Height Finish Post — Square Painted Top Cap . . . 180° Power Connector Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180° Variable-Height Finish Post — Square Painted Top Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180° Vertical Cover only, (no top cap or base raceway cover) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Base Raceway End Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Basic Monolithic Panel with Square Painted Top Cap . . . . . . Coat Hook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

38 30 30 33 30 31 31 34 31 32 33 32 33 35 10 38

UniGroup Too Price List

Table of Contents

Friction Pad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Full Height Side Trim Rail — for use with Add-On Panels . . . Glazed Add-On Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Glazed Monolithic Panel with Square Painted Top Cap . . . . . Hinges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . if Panel Attached Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Laminate Monolithic Panel with Square Painted Top Cap . . Monolithic Fabric Add-On Panel . . . . . . . . . . . . . . . . . . . . . . . . . . Monolithic Panel Core with Square Painted Top Cap — without Inserts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Monolithic Panel with Full-Height Inserts and Square Painted Top Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Monolithic Panel with Segmented Inserts and Square Painted Top Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Seismic Anchoring Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Side Trim Rail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Single Base Insert — Fabric . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Single Door — Laminate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Single Upper Inserts — Fabric or Markerboard . . . . . . . . . . . . T-Mount Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . UniGroup Too Top Cap Aligner . . . . . . . . . . . . . . . . . . . . . . . . . . UniGroup Too Top Cap End Plug . . . . . . . . . . . . . . . . . . . . . . . . Wall Mount Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Wall Track . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

38 36 27 24 37 29 12 26 18 14 16 38 36 20 28 22 38 35 35 37 37

V Series Box/Box/File – Attached . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Box/Box/File – Mobile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Box/Box/File – Suspended . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Box/File – Mobile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Box/File – Suspended . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . File/File – Attached . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . File/File – Mobile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . File/File – Suspended . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Five-High — Freestanding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Four-High — Freestanding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Legal Filing Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Three-High — Freestanding . . . . . . . . . . . . . . . . . . . . . . . . . . . . Two-High — Attached . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Two-High — Freestanding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

331 332 331 332 331 331 332 331 334 334 332 334 333 334

Wire Grid System and Accessories Diskette Bin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Grid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Grid Tackstrip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Mailbox . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Multi-Purpose Storage Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference Tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

292 291 292 291 292 291

Worksurface Accessories Adjustable Keyboard Pad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Adjustable Keyboard Pad — Fixed Height . . . . . . . . . . . . . . . . Adjustable Keyboard Pad with Swivel Mouse Pad . . . . . . . . Adjustable Keyboard Pad with Tilt . . . . . . . . . . . . . . . . . . . . . . . Boogie Board Keyboard Tray with Palm Rest . . . . . . . . . . . . . Boogie Board Keyboard Tray with Palm Rest and Integrated Mouse Pad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Boogie Board Mouse Pad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Double Support Leg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Dual-Leg Base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Extended Tilting Keyboard Pad . . . . . . . . . . . . . . . . . . . . . . . . . Horizontal Wire Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Make-A-Corner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Modesty Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Monitor Arm − Dual or Triple . . . . . . . . . . . . . . . . . . . . . . . . . . . . Monitor Arm − Single . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Mouse Pad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Mouse Pad with Horizontal Adjustment . . . . . . . . . . . . . . . . . .

260 261 259 260 258 258 258 253 253 260 254 254 253 263 263 262 262

Mouse Pad with Horizontal and Height Adjustment . . . . . . . . Palm Rest . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pencil + Drawer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pencil Drawer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Shallow Drawer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Single Support Leg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Steel Center Drawer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Support Post . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Wire Management Loop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Wood Center Drawer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Worksurface Grommet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Worksurface Reinforcement Channel . . . . . . . . . . . . . . . . . . . .

262 261 257 257 257 253 257 253 254 257 254 255

Worksurface Supports Adjustable Height Disc Base . . . . . . . . . . . . . . . . . . . . . . . . . . . . Convergent Mount Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Counter Top Brackets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Flush Mount Plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pedestal-to-Panel Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Rear-Corner Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Side Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Standard Cantilever Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . Standard Link Cantilever Bracket . . . . . . . . . . . . . . . . . . . . . . . Standard Mini Cantilever Bracket . . . . . . . . . . . . . . . . . . . . . . . Standard Snap-n-Fit Cantilever Bracket for Corner Worksurface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Standard Snap-n-Fit Cantilever Bracket for Rectangular Worksurfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Standard Snap-n-Fit Mini Cantilever Bracket . . . . . . . . . . . . . Standard Snap-n-Fit Mini Cantilever Bracket for Corner Worksurface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Straight Leg Basic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Straight Leg Basic with Caster . . . . . . . . . . . . . . . . . . . . . . . . . . Support Column . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Worksurface Support Panel — Laminate . . . . . . . . . . . . . . . . . Worksurface Support Panel — Wood . . . . . . . . . . . . . . . . . . . .

252 250 250 250 251 250 250 247 247 247 249 248 248 249 252 252 252 251 251

X Series Bookcase Shelf . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 330 Box/File — Mobile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 301 Box/File — Suspended . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 300 Box/Box/File — Attached . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 299 Box/Box/File — Mobile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 301 Box/Box/File — Suspended . . . . . . . . . . . . . . . . . . . . . . . . . . . . 300 CD Holder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 302 Compressor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 309 Counterweight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 309 Dividers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 302, 309 File/File — Attached . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 299 File/File — Mobile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 301 File/File — Suspended . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 300 Five-High Bookcase . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 330 Five-High Lateral File Painted, Painted Perforated or Wood Drawer Fronts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 307 Five-High Lateral File Painted, Painted Perforated or Wood Drawer Fronts — with Swing Doors . . . . . . . . . . . . . . . . . . . 308 Five-High with Bookcase Upper Storage . . . . . . . . . . . . . . . . . 317 Five-High with Bookcase Upper Storage — Translucent Door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 318 Five-High with Hinged Door Upper Storage . . . . . . . . . . . . . . 313 Five-High with Hinged Door Upper Storage — Translucent Doors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 315 Four-High Bookcase . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 330 Four-High Combination — Freestanding . . . . . . . . . . . . 325, 326 Four-High Combination — Translucent Doors . . . . . . . . . . . . 327 Four-High Lateral File Painted, Painted Perforated or Wood Drawer Fronts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 306 Four-High with Bookcase . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 316 April 2008 / USA

7

UniGroup Too Price List

Table of Contents

Four-High with Bookcase — Translucent Door . . . . . . . . . . . 312 Four-High with Hinged Door Upper Storage . . . . . . . . . . . . . . 310 Four-High with Hinged Door Upper Storage — Translucent Doors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 311 Front-to-Back Hanging Bars . . . . . . . . . . . . . . . . . . . . . . . . . . . . 309 Pedestal Cushion Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 302 Pencil Tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 302 Side-to-Side Hanging Bars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 309 Six-High with Bookcase Upper Storage — Translucent Door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 318 Stationary Pedestal Conversion Kit . . . . . . . . . . . . . . . . . . . . . . 302 Storage Shelf . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 328 Storage Shelves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 328 Three-High Bookcase . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 329 Three-High Combination — Freestanding . . . . . . . . . . . . . . . . 323 Three-High Combination — Translucent Doors . . . . . . . . . . . 324 Three-High Lateral File Painted, Painted Perforated or Wood Drawer Fronts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 305 Two-High Bookcase . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 329 Two-High Combination — Attached . . . . . . . . . . . . . . . . . 319, 320 Two-High Combination — Freestanding . . . . . . . . . . . . . 321, 322 Two-High Lateral File Painted, Painted Perforated or Wood Drawer Fronts — Attached . . . . . . . . . . . . . . . . . . . . . . . . . . . 303 Two-High Lateral File Painted, Painted Perforated or Wood Drawer Fronts — Freestanding . . . . . . . . . . . . . . . . . . . . . . . 304 Worksurface Height Adjustment Kit for Attached Combination Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 328 Worksurface Height Adjustment Kit for Attached Pedestal . 302

Finishes and Fabrics Finish/Color Legend . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .374-375 Seating Fabric/Color Legend. . . . . . . . . . . . . . . . . . . . . . . . . .378-379 Systems Fabrics/Color Legend. . . . . . . . . . . . . . . . . . . . . . . .376-377 Wood Finish Legend . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .373

Terms of Sale North America . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .380-383

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .384-398 Lifetime Product Warranty. . . . . . . . . . . . .Inside Back Cover

8

April 2008 / USA

UniGroup Too Price List

This page intentionally blank

April 2008 / USA

9

UniGroup Too Price List

Basic Monolithic Panel with Square Painted Top Cap UniGroup Too

Fabric

Features

Specification Tips • For mixed fabric surfaces, price at higher fabric grade. • Panels will accept add-on panels up to a combined height of 80′′(2032mm). For aesthetic consistency, specify UniGroup Too add-on panels. • Flex connectors provided for powered monolithic panels accommodate straight in-line, inside 90°, and inside 120° conditions (if applicable). • Receptacles for powered panels must be specified separately. • Raceway cover must be separately specified for option -E (no raceway cover). • If 90° top cap for four-way and 120° top cap for three-way are not specified, additional top cap end plugs will need to be ordered. • Additional top cap end plugs and base raceway end caps will need to be specified if finish posts are not ordered.

E2MN-B

• Includes non-powered or powered panel assembly, square top cap with aligner, with or without one-piece base raceway cover, 1.6 hinge kits, side trim rails, leveling glides and carpet gripper; power distribution assembly/flex connector(s) when power is specified. .6 top cap end plugs and base raceway end caps are shipped with each panel. Order additional as necessary. • Acoustical panel surfaces. • Panel surfaces may have the same fabric on both sides or a different fabric on each side. • Panel thickness is 2′′(51mm). • Base raceway is 4′′(102mm) high. • Powered raceway with or without raceway cover requires modified catalog number and list price. • Powered panels are available for countries that utilize 120 volt 60 hertz electrical systems and U.S. configured plugs and outlets. • Shipped with unassembled top cap, base raceway cover and side trim rails.

To Order, Specify: NOTE:

1) Product number.

This panel has fabric/colorway restrictions, see systems fabrics/ color legend.

2) Fabric/colorway for panel side one. 3) Fabric/colorway for panel side two. 4) Trim color raceway cover, glide housings and end caps. $23 upcharge (list) for Metallic trim color. 5) Trim color for top cap and side trim rails. $23 upcharge (list) for Metallic trim color.

Non-Powered Panel with Base Raceway Cover, see opposite page. The following options require modification of the 3-Circuit Non-Powered (Example: E2MN-462-B) product numbers and list prices shown on opposite page:

Panel Width

3-Circuit Powered (Example: E2MP-462-B)

6-Circuit Powered (Example: E2MP-462-6)

3-Circuit Powered without Base Raceway Cover (Example: E2MP-462-BE)

6-Circuit Powered without Base Raceway Cover (Example: E2MP-462-6E)

or

or

NYC 6-Circuit Powered (Example: E2MP-462-6Y)

NYC 3-Circuit Powered without Base Raceway Cover (Example: E2MP-462-BYE)

NYC 6-Circuit Powered without Base Raceway Cover (Example: E2MP-462-6YE)

Non-Powered without Base Raceway Cover (Example: E2MN-462-BE)

or

or

NYC 3-Circuit Powered (Example: E2MP-462-BY)

Deduct:

Add:

Add:

Add:

Add:

24′′(610mm)

-$42

$155

$276

$103

$224

30′′(762mm)

-44

155

276

100

221

36′′(914mm)

-48

155

276

90

211

42′′(1067mm)

-53

155

276

85

206

48′′(1219mm)

-56

155

276

80

201

60′′(1524mm)

-66

155

276

67

188

NOTES: • Powered panels with raceway covers ship with receptacle ports in the base raceway cover. Receptacle ports on the raceway cover measure 2.35 ′′(60mm) top-to-bottom and 2.88 ′′(73mm) side-to-side. • Non-powered panels ship without receptacle ports in the base raceway cover. • Powered panels with Power Distribution Assemblies (PDA) but without raceway covers require separately specified base raceway covers for power and communication port locations other than the standard powered base raceway cover. • New York City (NYC) electrical applications require field installation of PDA. • New York Port Authority (NYPA) electrical applications require metal raceway covers. To order, specify NYC powered panels without raceway cover and separately specify metal covers through Haworth e-Parts. • Some building codes may restrict the use of panel heights greater than 69 ′′(1753mm). Consult your local code authority to assure that the furniture layout is compliant. • For International Power, specify non-powered panels and use Power Logic components. See Specification Guide for more information on Power Logic. • For Chicago power, specify non-powered panels without a base raceway cover and separately specify Chicago power retrofit kit.

10

April 2008 / USA

Class AC – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

UniGroup Too Price List

Basic Monolithic Panel with Square Painted Top Cap UniGroup Too Actual Height Fabric

32′′(813mm)

Width

Non-Powered Number

Fabric Grade A B

24′′(610mm) E2MN-230- B $ 426 491 30′′(762mm) E2MN-3030- B 514 36′′(914mm) E2MN-330- B 566 42′′(1067mm) E2MN-4230- B 595 48′′(1219mm) E2MN-430- B 678 60′′(1524mm) E2MN-530- B $ 466 40′′(1016mm) 24′′(610mm) E2MN-238- B 517 30′′(762mm) E2MN-3038- B 545 36′′(914mm) E2MN-338- B 595 42′′(1067mm) E2MN-4238- B 627 48′′(1219mm) E2MN-438- B 709 60′′(1524mm) E2MN-538- B $ 486 48′′(1219mm) 24′′(610mm) E2MN-246- B 539 30′′(762mm) E2MN-3046- B 570 36′′(914mm) E2MN-346- B 622 42′′(1067mm) E2MN-4246- B 657 48′′(1219mm) E2MN-446- B 755 60′′(1524mm) E2MN-546- B $ 515 56′′(1422mm) 24′′(610mm) E2MN-254- B 585 30′′(762mm) E2MN-3054- B 612 36′′(914mm) E2MN-354- B 664 42′′(1067mm) E2MN-4254- B 700 48′′(1219mm) E2MN-454- B 805 60′′(1524mm) E2MN-554- B $ 502 64′′(1626mm) 24′′(610mm) E2MN-262- B 570 30′′(762mm) E2MN-3062- B 622 36′′(914mm) E2MN-362- B 670 42′′(1067mm) E2MN-4262- B 703 48′′(1219mm) E2MN-462- B 826 60′′(1524mm) E2MN-562- B $ 539 72′′(1829mm) 24′′(610mm) E2MN-270- B 612 30′′(762mm) E2MN-3070- B 666 36′′(914mm) E2MN-370- B 722 42′′(1067mm) E2MN-4270- B 752 48′′(1219mm) E2MN-470- B 884 60′′(1524mm) E2MN-570- B $ 684 80′′(2032mm) 24′′(610mm) E2MN-278- B 775 30′′(762mm) E2MN-3078- B 852 36′′(914mm) E2MN-378- B 923 42′′(1067mm) E2MN-4278- B 969 48′′(1219mm) E2MN-478- B 1083 60′′(1524mm) E2MN-578- B List price shown is for a non-powered panel with base raceway cover.

$ 460 525 560 612 641 724 $ 500 551 591 641 673 755 $ 520 573 616 668 703 801 $ 549 619 658 710 746 851 $ 540 608 672 720 753 876 $ 577 650 716 772 802 934 $ 722 813 902 973 1019 1133

Class AC – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

C

D

E

F

G

$ 510 575 618 670 699 782 $ 550 601 649 699 731 813 $ 570 623 674 726 761 859 $ 599 669 716 768 804 909 $ 594 662 734 782 815 938 $ 631 704 778 834 864 996 $ 776 867 964 1035 1081 1195

$ 550 615 666 718 747 830 $ 590 641 697 747 779 861 $ 610 663 722 774 809 907 $ 639 709 764 816 852 957 $ 638 706 802 850 883 1006 $ 675 748 846 902 932 1064 $ 820 911 1032 1103 1149 1263

$ 560 625 678 730 759 842 $ 600 651 709 759 791 873 $ 620 673 750 802 837 935 $ 649 719 812 864 900 1005 $ 646 714 854 902 935 1058 $ 687 760 910 966 996 1128 $ 832 923 1148 1219 1265 1379

$ 570 635 688 740 769 852 $ 610 661 719 769 801 883 $ 630 683 806 858 893 991 $ 659 729 876 928 964 1069 $ 652 720 924 972 1005 1128 $ 699 772 986 1042 1072 1204 $ 876 967 1238 1309 1355 1469

$ 580 645 698 750 779 862 $ 620 671 761 811 843 925 $ 640 693 862 914 949 1047 $ 677 747 940 992 1028 1133 $ 688 756 994 1042 1075 1198 $ 733 806 1062 1118 1148 1280 $ 924 1015 1328 1399 1445 1559

April 2008 / USA

11

UniGroup Too Price List

Laminate Monolithic Panel with Square Painted Top Cap UniGroup Too

Laminate

E2DN-B

Features

Specification Tips

• Includes non-powered or powered panel assembly, square top cap with aligner, with or without one-piece base raceway cover, 1.6 hinge kits, side trim rails, leveling glides and carpet gripper; power distribution assembly/flex connector(s) when power is specified. .6 top cap end plugs and base raceway end caps are shipped with each panel. Order additional as necessary. • Panel surfaces may have the same laminate surface color on both sides or a different laminate surface color on each side. • Panel thickness is 2′′(51mm). • Base raceway is 4′′(102mm) high. • Powered raceway with or without raceway cover requires modified catalog number and list price. • Powered panels are available for countries that utilize 120 volt 60 hertz electrical systems and U.S. configured plugs and outlets. • Shipped with unassembled top cap, base raceway cover and side trim rails.

• Both sides in the same color laminate or different color laminate on each side. • Panels will accept add-on panels up to a combined height of 80′′(2032mm). For aesthetic consistency, specify UniGroup Too add-on panels. • Flex connectors provided for powered monolithic panels accommodate straight in-line, inside 90°, and inside 120° conditions (if applicable). • Receptacles for powered panels must be specified separately. • Raceway cover must be separately specified for option -E (no raceway cover). • If 90° top cap for four-way and 120° top cap for three-way are not specified, additional top cap end plugs will need to be ordered. • Additional top cap end plugs and base raceway end caps will need to be specified if finish posts are not ordered.

To Order, Specify: 1) Product number. 2) Laminate surface color for panel side one. 3) Laminate surface color for panel side two. 4) Trim color raceway cover, glide housings and end caps. $23 upcharge (list) for Metallic trim color. 5) Trim color for top cap and side trim rails. $23 upcharge (list) for Metallic trim color.

Non-Powered Panel with Base Raceway Cover, see opposite page. The following options require modification of the 3-Circuit Non-Powered (Example: E2DN-462-B) product numbers and list prices shown on opposite page:

Panel Width

3-Circuit Powered (Example: E2DP-462-B)

6-Circuit Powered (Example: E2DP-462-6)

3-Circuit Powered without Base Raceway Cover (Example: E2DP-462-BE)

6-Circuit Powered without Base Raceway Cover (Example: E2DP-462-6E)

or

or

NYC 6-Circuit Powered (Example: E2DP-462-6Y)

NYC 3-Circuit Powered without Base Raceway Cover (Example: E2DP-462-BYE)

NYC 6-Circuit Powered without Base Raceway Cover (Example: E2DP-462-6YE)

Non-Powered without Base Raceway Cover (Example: E2DN-462-BE)

or

or

NYC 3-Circuit Powered (Example: E2DP-462-BY)

Deduct:

Add:

Add:

Add:

Add:

24′′(610mm)

-$42

$155

$276

$103

$224

30′′(762mm)

-44

155

276

100

221

36′′(914mm)

-48

155

276

90

211

42′′(1067mm)

-53

155

276

85

206

48′′(1219mm)

-56

155

276

80

201

60′′(1524mm)

-66

155

276

67

188

NOTES: • Powered panels with raceway covers ship with receptacle ports in the base raceway cover. Receptacle ports on the raceway cover measure 2.35 ′′(60mm) top-to-bottom and 2.88 ′′(73mm) side-to-side. • Non-powered panels ship without receptacle ports in the base raceway cover. • Powered panels with Power Distribution Assemblies (PDA) but without raceway covers require separately specified base raceway covers for power and communication port locations other than the standard powered base raceway cover. • New York City (NYC) electrical applications require field installation of PDA. • New York Port Authority (NYPA) electrical applications require metal raceway covers. To order, specify NYC powered panels without raceway cover and separately specify metal covers through Haworth e-Parts. • Some building codes may restrict the use of panel heights greater than 69 ′′(1753mm). Consult your local code authority to assure that the furniture layout is compliant. • For International Power, specify non-powered panels and use Power Logic components. See Specification Guide for more information on Power Logic. • For Chicago power, specify non-powered panels without a base raceway cover and separately specify Chicago power retrofit kit.

12

April 2008 / USA

Class AC – GSA: Open Market Canadian Conversion Factor: Refer to haworth.com/Canada

UniGroup Too Price List

Laminate Monolithic Panel with Square Painted Top Cap UniGroup Too Actual Height Laminate

Width

32′′(813mm)

24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 60′′(1524mm) 40′′(1016mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 60′′(1524mm) 48′′(1219mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 60′′(1524mm) 56′′(1422mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 60′′(1524mm) 64′′(1626mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 60′′(1524mm) 72′′(1829mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 60′′(1524mm) 80′′(2032mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 60′′(1524mm) List price shown is for a non-powered panel with base raceway cover.

Non-Powered Number

Price

E2DN-230- B E2DN-3030- B E2DN-330- B E2DN-4230- B E2DN-430- B E2DN-530- B E2DN-238- B E2DN-3038- B E2DN-338- B E2DN-4238- B E2DN-438- B E2DN-538- B E2DN-246- B E2DN-3046- B E2DN-346- B E2DN-4246- B E2DN-446- B E2DN-546- B E2DN-254- B E2DN-3054- B E2DN-354- B E2DN-4254- B E2DN-454- B E2DN-554- B E2DN-262- B E2DN-3062- B E2DN-362- B E2DN-4262- B E2DN-462- B E2DN-562- B E2DN-270- B E2DN-3070- B E2DN-370- B E2DN-4270- B E2DN-470- B E2DN-570- B E2DN-278- B E2DN-3078- B E2DN-378- B E2DN-4278- B E2DN-478- B E2DN-578- B

$ 816 917 933 1028 1081 1231 $ 847 939 1018 1110 1140 1288 $ 884 980 1063 1160 1225 1374 $ 959 1092 1141 1238 1307 1502 $ 936 1063 1160 1250 1312 1541 $1022 1158 1261 1366 1426 1673 $1230 1393 1532 1658 1741 1917

Product marked with this symbol available as GSA open market.

Class AC – GSA: Open Market Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

13

UniGroup Too Price List

Monolithic Panel with Full-Height Inserts and Square Painted Top Cap UniGroup Too

Fabric Inserts

E2LN-B

Features

Specification Tips

• Includes non-powered or powered full-height panel core assembly, monolithic panel inserts square top cap with aligner, with or without one-piece base raceway cover, 1.6 hinge kits, side trim rails, leveling glides and carpet gripper; power distribution assembly/flex connector(s) when power is specified. .6 top cap end plugs and base raceway end caps are shipped with each panel. Order additional as necessary. • Acoustical panel surfaces have moderate tackable properties. • Each insert may have the same fabric or a different fabric. • Panel thickness is 2′′(51mm). • Base raceway is 4′′(102mm) high. • Powered raceway with or without raceway cover requires modified catalog number and list price. • Powered panels are available for countries that utilize 120 volt 60 hertz electrical systems and U.S. configured plugs and outlets. • Shipped with unassembled inserts, top cap, base raceway cover and side trim rails. • Inserts may easily be changed on installed monolithic panels without components. • Can be field-modified from full-height monolithic panel insert to segmented panel inserts.

• For mixed fabric surfaces, price at higher fabric grade. • Panels will accept add-on panels up to a combined height of 80′′(2032mm). For aesthetic consistency, specify UniGroup Too add-on panels. • Flex connectors provided for powered monolithic panels accommodate straight in-line, inside 90°, and inside 120° conditions (if applicable). • Receptacles for powered panels must be specified separately. • Raceway cover must be separately specified for option -E (no raceway cover). • If 90° top cap for four-way and 120° top cap for three-way are not specified, additional top cap end plugs will need to be ordered. • Additional top cap end plugs and base raceway end caps will need to be specified if finish posts are not ordered.

To Order, Specify: 1) Product number. 2) Fabric/colorway for panel insert side one. 3) Fabric/colorway for panel insert side two. 4) Trim color raceway cover, glide housings and end caps. $23 upcharge (list) for Metallic trim color. 5) Trim color for top cap and side trim rails. $23 upcharge (list) for Metallic trim color.

Non-Powered Panel with Base Raceway Cover, see opposite page. The following options require modification of the 3-Circuit Non-Powered (Example: E2LN-462-BFF) product numbers and list prices shown on opposite page:

Panel Width

3-Circuit Powered (Example: E2LP-462-BFF)

6-Circuit Powered (Example: E2LP-462-6FF)

3-Circuit Powered without Base Raceway Cover (Example: E2LP-462-BEFF)

6-Circuit Powered without Base Raceway Cover (Example: E2LP-462-6EFF)

or

or

NYC 6-Circuit Powered (Example: E2LP-462-6YFF)

NYC 3-Circuit Powered without Base Raceway Cover (Example: E2LP-462-BYEFF)

NYC 6-Circuit Powered without Base Raceway Cover (Example: E2LP-462-6YEFF)

Non-Powered without Base Raceway Cover (Example: E2LN-462-BEFF)

or

or

NYC 3-Circuit Powered (Example: E2LP-462-BYFF)

Deduct:

Add:

Add:

Add:

Add:

24′′(610mm)

-$42

$155

$276

$103

$224

30′′(762mm)

-44

155

276

100

221

36′′(914mm)

-48

155

276

90

211

42′′(1067mm)

-53

155

276

85

206

48′′(1219mm)

-56

155

276

80

201

60′′(1524mm)

-66

155

276

67

188

NOTES: • Powered panels with raceway covers ship with receptacle ports in the base raceway cover. Receptacle ports on the raceway cover measure 2.35 ′′(60mm) top-to-bottom and 2.88 ′′(73mm) side-to-side. • Non-powered panels ship without receptacle ports in the base raceway cover. • Powered panels with Power Distribution Assemblies (PDA) but without raceway covers require separately specified base raceway covers for power and communication port locations other than the standard powered base raceway cover. • New York City (NYC) electrical applications require field installation of PDA. • New York Port Authority (NYPA) electrical applications require metal raceway covers. To order, specify NYC powered panels without raceway cover and separately specify metal covers through Haworth e-Parts. • Some building codes may restrict the use of panel heights greater than 69 ′′(1753mm). Consult your local code authority to assure that the furniture layout is compliant. • For International Power, specify non-powered panels and use Power Logic components. See Specification Guide for more information on Power Logic. • For Chicago power, specify non-powered panels without a base raceway cover and separately specify Chicago power retrofit kit.

14

April 2008 / USA

Class AC – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

UniGroup Too Price List

Monolithic Panel with Full-Height Inserts and Square Painted Top Cap UniGroup Too Actual Height Fabric Inserts

Width

Non-Powered Number

Fabric Grade A B

32′′(813mm)

24′′(610mm) E2LN-230- B FF $ 497 FF 564 30′′(762mm) E2LN-3030- B FF 608 36′′(914mm) E2LN-330- B FF 675 42′′(1067mm) E2LN-4230- B FF 721 48′′(1219mm) E2LN-430- B FF 815 60′′(1524mm) E2LN-530- B FF $ 551 40′′(1016mm) 24′′(610mm) E2LN-238- B FF 567 30′′(762mm) E2LN-3038- B FF 660 36′′(914mm) E2LN-338- B FF 728 42′′(1067mm) E2LN-4238- B FF 781 48′′(1219mm) E2LN-438- B FF 876 60′′(1524mm) E2LN-538- B FF $ 590 48′′(1219mm) 24′′(610mm) E2LN-246- B FF 653 30′′(762mm) E2LN-3046- B FF 709 36′′(914mm) E2LN-346- B FF 785 42′′(1067mm) E2LN-4246- B FF 843 48′′(1219mm) E2LN-446- B FF 856 60′′(1524mm) E2LN-546- B FF $ 640 56′′(1422mm) 24′′(610mm) E2LN-254- B FF 719 30′′(762mm) E2LN-3054- B FF 776 36′′(914mm) E2LN-354- B FF 856 42′′(1067mm) E2LN-4254- B FF 919 48′′(1219mm) E2LN-454- B FF 1041 60′′(1524mm) E2LN-554- B FF $ 662 64′′(1626mm) 24′′(610mm) E2LN-262- B FF 742 30′′(762mm) E2LN-3062- B FF 824 36′′(914mm) E2LN-362- B FF 845 42′′(1067mm) E2LN-4262- B FF 970 48′′(1219mm) E2LN-462- B FF 1112 60′′(1524mm) E2LN-562- B FF $ 727 72′′(1829mm) 24′′(610mm) E2LN-270- B FF 814 30′′(762mm) E2LN-3070- B FF 903 36′′(914mm) E2LN-370- B FF 996 42′′(1067mm) E2LN-4270- B FF 1064 48′′(1219mm) E2LN-470- B FF 1218 60′′(1524mm) E2LN-570- B FF $ 879 80′′(2032mm) 24′′(610mm) E2LN-278- B FF 983 30′′(762mm) E2LN-3078- B FF 1097 36′′(914mm) E2LN-378- B FF 1208 42′′(1067mm) E2LN-4278- B FF 1294 48′′(1219mm) E2LN-478- B FF 1443 60′′(1524mm) E2LN-578- B List price shown is for a non-powered panel with base raceway cover.

Class AC – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

$ 533 600 656 723 807 863 $ 587 603 708 776 829 924 $ 626 689 757 833 891 904 $ 676 755 824 904 967 1089 $ 702 782 876 897 1022 1164 $ 767 854 955 1048 1116 1270 $ 919 1023 1149 1260 1346 1495

C

D

E

F

G

$ 587 654 720 787 833 927 $ 641 657 772 840 893 988 $ 680 743 821 897 955 968 $ 730 809 888 968 1031 1153 $ 762 842 946 967 1092 1234 $ 827 914 1025 1118 1186 1340 $ 979 1083 1219 1330 1416 1565

$ 629 696 770 837 883 977 $ 683 699 822 890 943 1038 $ 722 785 871 947 1005 1018 $ 772 851 938 1018 1081 1203 $ 808 888 1018 1039 1164 1306 $ 873 960 1097 1190 1258 1412 $1025 1129 1291 1402 1488 1637

$ 641 708 784 851 897 991 $ 695 711 836 904 957 1052 $ 734 797 903 979 1037 1050 $ 858 863 994 1074 1137 1259 $ 812 894 1072 1093 1218 1360 $ 885 972 1165 1258 1326 1480 $1037 1141 1417 1528 1614 1763

$ 651 718 796 863 909 1003 $ 705 721 850 918 971 1066 $ 744 807 963 1039 1097 1110 $ 924 873 1062 1142 1205 1327 $ 816 902 1148 1169 1294 1436 $ 899 986 1247 1340 1408 1562 $1089 1193 1513 1624 1710 1859

$ 663 730 806 873 919 1013 $ 717 733 892 960 1013 1108 $ 756 819 1021 1097 1155 1168 $ 988 895 1128 1208 1271 1393 $ 838 942 1224 1245 1370 1512 $ 939 1026 1327 1420 1488 1642 $1137 1241 1609 1720 1806 1955

April 2008 / USA

15

UniGroup Too Price List

Monolithic Panel with Segmented Inserts and Square Painted Top Cap UniGroup Too

Fabric Inserts

E2SN-B

Features

Specification Tips

• Includes non-powered or powered full-height panel core assembly, segmented panel inserts and trim strips, square top cap with aligner, with or without one-piece base raceway cover, 1.6 hinge kits, side trim rails, leveling glides and carpet gripper; power distribution assembly/flex connector(s) when power is specified. .6 top cap end plugs and base raceway end caps are shipped with each panel. Order additional as necessary. • Acoustical panel surfaces have moderate tackable properties. • Panel surfaces may have the same fabric on both sides or a different fabric on each side. • Panel thickness is 2′′(51mm). • Base raceway is 4′′(102mm) high. • Powered raceway with or without raceway cover requires modified catalog number and list price. • Powered panels are available for countries that utilize 120 volt 60 hertz electrical systems and U.S. configured plugs and outlets. • Shipped with unassembled inserts, top cap, base raceway cover side trim rails. • Inserts may easily be changed on installed monolithic panels without components. • Refer to the Panel Configuration Options chart in Specification Guide for panel and insert heights (nominal vs. actual) and insert configurations.

• Mixed fabric surfaces options consists of one fabric/colorway per side. Price at higher fabric grade. • Panels will accept add-on panels up to a combined height of 80′′(2032mm). For aesthetic consistency, specify UniGroup Too add-on panels. • Flex connectors provided for powered monolithic panels accommodate straight in-line, inside 90°, and inside 120° conditions (if applicable). • Receptacles for powered panels must be specified separately. • Raceway cover must be separately specified for option -E (no raceway cover). • If 90° top cap for four-way and 120° top cap for three-way are not specified, additional top cap end plugs will need to be ordered. • Additional top cap end plugs and base raceway end caps will need to be specified if finish posts are not ordered.

To Order, Specify: 1) Product number. 2) Fabric/colorway for panel insert side one. 3) Fabric/colorway for panel insert side two. 4) Trim color raceway cover, glide housings and end caps. $23 upcharge (list) for Metallic trim color. 5) Trim color for top cap, side trim rails and trim strip(s) for panel insert. $23 upcharge (list) for Metallic trim color.

Non-Powered Panel with Base Raceway Cover, see opposite page. The following options require modification of the 3-Circuit Non-Powered (Example: E2SN-462-BFF) product numbers and list prices shown on opposite page:

Panel Width

3-Circuit Powered (Example: E2SP-462-BFF)

6-Circuit Powered (Example: E2SP-462-6FF)

3-Circuit Powered without Base Raceway Cover (Example: E2SP-462-BEFF)

6-Circuit Powered without Base Raceway Cover (Example: E2SP-462-6EFF)

or

or

NYC 6-Circuit Powered (Example: E2SP-462-6YFF)

NYC 3-Circuit Powered without Base Raceway Cover (Example: E2SP-462-BYEFF)

NYC 6-Circuit Powered without Base Raceway Cover (Example: E2SP-462-6YEFF)

Non-Powered without Base Raceway Cover (Example: E2SN-462-BEFF)

or

or

NYC 3-Circuit Powered (Example: E2SP-462-BYFF)

Deduct:

Add:

Add:

Add:

Add:

24′′(610mm)

-$42

$155

$276

$103

$224

30′′(762mm)

-44

155

276

100

221

36′′(914mm)

-48

155

276

90

211

42′′(1067mm)

-53

155

276

85

206

48′′(1219mm)

-56

155

276

80

201

60′′(1524mm)

-66

155

276

67

188

NOTES: • Powered panels with raceway covers ship with receptacle ports in the base raceway cover. Receptacle ports on the raceway cover measure 2.35 ′′(60mm) top-to-bottom and 2.88 ′′(73mm) side-to-side. • Non-powered panels ship without receptacle ports in the base raceway cover. • Powered panels with Power Distribution Assemblies (PDA) but without raceway covers require separately specified base raceway covers for power and communication port locations other than the standard powered base raceway cover. • New York City (NYC) electrical applications require field installation of PDA. • New York Port Authority (NYPA) electrical applications require metal raceway covers. To order, specify NYC powered panels without raceway cover and separately specify metal covers through Haworth e-Parts. • Some building codes may restrict the use of panel heights greater than 69 ′′(1753mm). Consult your local code authority to assure that the furniture layout is compliant. • For International Power, specify non-powered panels and use Power Logic components. See Specification Guide for more information on Power Logic. • For Chicago power, specify non-powered panels without a base raceway cover and separately specify Chicago power retrofit kit.

16

April 2008 / USA

Class AC – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

UniGroup Too Price List

Monolithic Panel with Segmented Inserts and Square Painted Top Cap UniGroup Too Actual Height Fabric Inserts

40′′(1016mm)

Width

Non-Powered Number

Fabric Grade A B

24′′(610mm) E2SN-238- B FF $ 608 FF 664 30′′(762mm) E2SN-3038- B FF 725 36′′(914mm) E2SN-338- B FF 802 42′′(1067mm) E2SN-4238- B FF 855 48′′(1219mm) E2SN-438- B FF 957 60′′(1524mm) E2SN-538- B FF $ 636 48′′(1219mm) 24′′(610mm) E2SN-246- B FF 696 30′′(762mm) E2SN-3046- B FF 760 36′′(914mm) E2SN-346- B FF 842 42′′(1067mm) E2SN-4246- B FF 898 48′′(1219mm) E2SN-446- B FF 1016 60′′(1524mm) E2SN-546- B FF $ 771 56′′(1422mm) 24′′(610mm) E2SN-254- B FF 849 30′′(762mm) E2SN-3054- B FF 925 36′′(914mm) E2SN-354- B FF 1023 42′′(1067mm) E2SN-4254- B FF 1089 48′′(1219mm) E2SN-454- B FF 1229 60′′(1524mm) E2SN-554- B FF $ 776 64′′(1626mm) 24′′(610mm) E2SN-262- B FF 853 30′′(762mm) E2SN-3062- B FF 949 36′′(914mm) E2SN-362- B FF 1047 42′′(1067mm) E2SN-4262- B FF 1113 48′′(1219mm) E2SN-462- B FF 1268 60′′(1524mm) E2SN-562- B FF $ 918 72′′(1829mm) 24′′(610mm) E2SN-270- B FF 1002 30′′(762mm) E2SN-3070- B FF 1116 36′′(914mm) E2SN-370- B FF 1235 42′′(1067mm) E2SN-4270- B FF 1308 48′′(1219mm) E2SN-470- B FF 1485 60′′(1524mm) E2SN-570- B FF $1035 80′′(2032mm) 24′′(610mm) E2SN-278- B FF 1136 30′′(762mm) E2SN-3078- B FF 1268 36′′(914mm) E2SN-378- B FF 1400 42′′(1067mm) E2SN-4278- B FF 1484 48′′(1219mm) E2SN-478- B FF 1655 60′′(1524mm) E2SN-578- B List price shown is for a non-powered panel with base raceway cover.

$ 642 698 771 848 901 1003 $ 670 730 806 888 944 1062 $ 805 883 971 1069 1135 1275 $ 814 891 999 1097 1163 1318 $ 956 1040 1166 1285 1358 1535 $1073 1174 1318 1450 1534 1705

Class AC – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

C

D

E

F

G

$ 692 748 829 906 959 1061 $ 720 780 864 946 1002 1120 $ 855 933 1029 1127 1193 1333 $ 868 945 1061 1159 1225 1380 $1010 1094 1228 1347 1420 1597 $1127 1228 1380 1512 1596 1767

$ 732 788 877 954 1007 1109 $ 760 820 912 994 1050 1168 $ 895 973 1077 1175 1241 1381 $ 912 989 1129 1227 1293 1448 $1054 1138 1296 1415 1488 1665 $1171 1272 1448 1580 1664 1835

$ 742 798 889 966 1019 1121 $ 770 830 940 1022 1078 1180 $ 905 983 1127 1225 1291 1409 $ 922 999 1181 1279 1345 1470 $1064 1148 1360 1479 1552 1729 $1183 1284 1566 1698 1782 1953

$ 752 808 901 978 1031 1133 $ 780 840 996 1078 1134 1192 $ 915 993 1191 1289 1355 1465 $ 934 1011 1251 1349 1415 1534 $1078 1162 1436 1555 1628 1805 $1229 1330 1656 1788 1872 2043

$ 772 828 941 1018 1071 1173 $ 800 860 1052 1134 1190 1232 $ 935 1013 1253 1351 1417 1521 $ 962 1039 1323 1421 1487 1596 $1114 1198 1512 1631 1704 1881 $1275 1376 1746 1878 1962 2133

April 2008 / USA

17

UniGroup Too Price List

Monolithic Panel Core with Square Painted Top Cap — without Inserts UniGroup Too

Panel Core

Features

Specification Tips

• Includes non-powered or powered panel core assembly, square top cap with aligner, with or without one-piece base raceway cover, 1.6 hinge kits, side trim rails, leveling glides and carpet gripper; power distribution assembly/flex connector(s) when power is specified. .6 top cap end plugs and base raceway end caps are shipped with each panel. Order additional as necessary. • For use with separately specified inserts. • Panel thickness is 2′′(51mm). • Base raceway is 4′′(102mm) high. • Powered raceway with or without raceway cover requires modified catalog number and list price. • Powered panels are available for countries that utilize 120 volt 60 hertz electrical systems and U.S. configured plugs and outlets. • Shipped with unassembled top cap, base raceway cover and side trim rails.

• Panels will accept add-on panels up to a combined height of 80′′(2032mm). For aesthetic consistency, specify UniGroup Too add-on panels. • Flex connectors provided for powered monolithic panels accommodate straight in-line, inside 90°, and inside 120° conditions (if applicable). • Receptacles for powered panels must be specified separately. • Raceway cover must be separately specified for option -E (no raceway cover). • If 90° top cap for four-way and 120° top cap for three-way are not specified, additional top cap end plugs will need to be ordered. • Additional top cap end plugs and base raceway end caps will need to be specified if finish posts are not ordered.

To Order, Specify:

E2BN-B

1) Product number. 2) Trim color raceway cover, glide housings and end caps. $23 upcharge (list) for Metallic trim color. 3) Trim color for top cap and side trim rails. $23 upcharge (list) for Metallic trim color.

Non-Powered Panel with Base Raceway Cover, see opposite page. The following options require modification of the 3-Circuit Non-Powered (Example: E2BN-462-B) product numbers and list prices shown on opposite page:

Panel Width

3-Circuit Powered (Example: E2BP-462-B)

6-Circuit Powered (Example: E2BP-462-6)

3-Circuit Powered without Base Raceway Cover (Example: E2BP-462-BE)

6-Circuit Powered without Base Raceway Cover (Example: E2BP-462-6E)

or

or

NYC 6-Circuit Powered (Example: E2BP-462-6Y)

NYC 3-Circuit Powered without Base Raceway Cover (Example: E2BP-462-BYE)

NYC 6-Circuit Powered without Base Raceway Cover (Example: E2BP-462-6YE)

Non-Powered without Base Raceway Cover (Example: E2BN-462-BE)

or

or

NYC 3-Circuit Powered (Example: E2BP-462-BY)

Deduct:

Add:

Add:

Add:

Add:

24′′(610mm)

-$42

$155

$276

$103

$224

30′′(762mm)

-44

155

276

100

221

36′′(914mm)

-48

155

276

90

211

42′′(1067mm)

-53

155

276

85

206

48′′(1219mm)

-56

155

276

80

201

60′′(1524mm)

-66

155

276

67

188

NOTES: • Powered panels with raceway covers ship with receptacle ports in the base raceway cover. Receptacle ports on the raceway cover measure 2.35 ′′(60mm) top-to-bottom and 2.88 ′′(73mm) side-to-side. • Non-powered panels ship without receptacle ports in the base raceway cover. • Powered panels with Power Distribution Assemblies (PDA) but without raceway covers require separately specified base raceway covers for power and communication port locations other than the standard powered base raceway cover. • New York City (NYC) electrical applications require field installation of PDA. • New York Port Authority (NYPA) electrical applications require metal raceway covers. To order, specify NYC powered panels without raceway cover and separately specify metal covers through Haworth e-Parts. • Some building codes may restrict the use of panel heights greater than 69 ′′(1753mm). Consult your local code authority to assure that the furniture layout is compliant. • For International Power, specify non-powered panels and use Power Logic components. See Specification Guide for more information on Power Logic. • For Chicago power, specify non-powered panels without a base raceway cover and separately specify Chicago power retrofit kit.

18

April 2008 / USA

Class AC – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

UniGroup Too Price List

Monolithic Panel Core with Square Painted Top Cap — without Inserts UniGroup Too Actual Height Panel Core

Width

32′′(813mm)

24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 60′′(1524mm) 40′′(1016mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 60′′(1524mm) 48′′(1219mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 60′′(1524mm) 56′′(1422mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 60′′(1524mm) 64′′(1626mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 60′′(1524mm) 72′′(1829mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 60′′(1524mm) 80′′(2032mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 60′′(1524mm) List price shown is for a non-powered panel with base raceway cover.

Class AC – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

Non-Powered Number

Price

E2BN-230- B E2BN-3030- B E2BN-330- B E2BN-4230- B E2BN-430- B E2BN-530- B E2BN-238- B E2BN-3038- B E2BN-338- B E2BN-4238- B E2BN-438- B E2BN-538- B E2BN-246- B E2BN-3046- B E2BN-346- B E2BN-4246- B E2BN-446- B E2BN-546- B E2BN-254- B E2BN-3054- B E2BN-354- B E2BN-4254- B E2BN-454- B E2BN-554- B E2BN-262- B E2BN-3062- B E2BN-362- B E2BN-4262- B E2BN-462- B E2BN-562- B E2BN-270- B E2BN-3070- B E2BN-370- B E2BN-4270- B E2BN-470- B E2BN-570- B E2BN-278- B E2BN-3078- B E2BN-378- B E2BN-4278- B E2BN-478- B E2BN-578- B

$306 354 369 407 427 487 $335 371 394 427 452 510 $351 387 410 448 473 543 $370 421 440 478 504 579 $362 410 448 482 506 593 $387 440 479 519 541 636 $491 558 613 664 696 779

April 2008 / USA

19

UniGroup Too Price List

Single Base Insert UniGroup Too

Base Insert — Fabric

Feature

To Order, Specify:

• Includes one base insert.

1) Product number.

Specification Tips

2) Fabric/colorway.

• Only for use at base with monolithic core panel, separately specified. • May be used with upper inserts and appropriate height panel core. • Base and/or upper insert combinations may vary per panel side. • Only one base insert per side is allowed.

E2JF

20

April 2008 / USA

Class AC – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

UniGroup Too Price List

Single Base Insert UniGroup Too Installed Height

Insert Height

Base Insert — Fabric 16′′(406mm)

12′′(305mm)

32′′(813mm)

28′′(711mm)

40′′(1016mm)

36′′(914mm)

48′′(1219mm)

44′′(1118mm)

56′′(1422mm)

52′′(1321mm)

64′′(1626mm)

60′′(1524mm)

72′′(1829mm)

68′′(1727mm)

80′′(2032mm)

76′′(1930mm)

Width

Number

Fabric Grade A B

C

D

E

F

G

24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 60′′(1524mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 60′′(1524mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 60′′(1524mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 60′′(1524mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 60′′(1524mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 60′′(1524mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 60′′(1524mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 60′′(1524mm)

E2JF-214 E2JF-3014 E2JF-314 E2JF-4214 E2JF-414 E2JF-514 E2JF-230 E2JF-3030 E2JF-330 E2JF-4230 E2JF-430 E2JF-530 E2JF-238 E2JF-3038 E2JF-338 E2JF-4238 E2JF-438 E2JF-538 E2JF-246 E2JF-3046 E2JF-346 E2JF-4246 E2JF-446 E2JF-546 E2JF-254 E2JF-3054 E2JF-354 E2JF-4254 E2JF-454 E2JF-554 E2JF-262 E2JF-3062 E2JF-362 E2JF-4262 E2JF-462 E2JF-562 E2JF-270 E2JF-3070 E2JF-370 E2JF-4270 E2JF-470 E2JF-570 E2JF-278 E2JF-3078 E2JF-378 E2JF-4278 E2JF-478 E2JF-578

$ 74 82 93 106 116 128 $ 79 87 98 111 122 136 $ 89 97 111 125 138 154 $100 110 125 142 156 173 $113 124 142 160 176 196 $127 141 160 180 200 221 $145 159 180 205 224 250 $163 179 205 231 254 282

$116 124 145 158 168 180 $121 129 150 163 174 188 $131 139 163 177 190 206 $142 152 177 194 208 225 $155 166 194 212 228 248 $173 187 216 236 256 277 $191 205 236 261 280 306 $209 225 261 287 310 338

$136 144 169 182 192 204 $141 149 174 187 198 212 $151 159 187 201 214 230 $162 172 201 218 232 249 $175 186 218 236 252 272 $195 209 250 270 290 311 $213 227 270 295 314 340 $231 247 295 321 344 372

$141 149 175 188 198 210 $146 154 180 193 204 218 $156 164 193 207 220 236 $167 $177 215 232 246 263 $180 191 243 261 277 297 $201 215 276 296 316 337 $219 233 302 327 346 372 $237 253 354 380 403 431

$146 154 181 194 204 216 $151 159 185 198 209 223 $161 169 199 213 226 242 $172 $182 243 260 274 291 $185 196 275 293 309 329 $224 238 311 331 351 372 $242 256 340 365 384 410 $260 276 399 425 448 476

$151 159 201 214 224 236 $156 164 190 203 214 228 $166 174 219 233 246 262 $177 $187 271 288 302 319 $195 206 306 324 340 360 $247 261 347 367 387 408 $265 279 378 403 422 448 $283 299 444 470 493 521

$ 91 99 116 129 139 151 $ 96 104 121 134 145 159 $106 114 134 148 161 177 $117 127 148 165 179 196 $130 141 165 183 199 219 $146 160 185 205 225 246 $164 178 205 230 249 275 $182 198 230 256 279 307

Class AC – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

21

UniGroup Too Price List

Single Upper Inserts UniGroup Too Insert Height Upper Insert — Fabric or Markerboard

8′′(203mm)

16′′(406mm)

Width

Number

Fabric Grade A B

C

D

E

F

G

24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 60′′(1524mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 60′′(1524mm)

E2TF-208 E2TF-3008 E2TF-308 E2TF-4208 E2TF-408 E2TF-508 E2TF-216 E2TF-3016 E2TF-316 E2TF-4216 E2TF-416 E2TF-516

$ 57 59 67 74 80 88 $ 64 67 75 86 91 100

$ 93 95 103 110 116 124 $100 103 111 122 127 136

$ 98 100 108 115 121 129 $105 108 116 127 132 141

$105 107 115 122 128 136 $112 115 123 134 139 148

$110 112 120 127 133 141 $117 120 128 139 144 153

$115 117 125 132 138 146 $122 125 133 144 149 158

1 16′′(406mm) E2TF

32′′(813mm)

24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 60′′(1524mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 60′′(1524mm)

E2TM-216E2TM-3016E2TM-316E2TM-4216E2TM-416E2TM-516E2TM-232E2TM-3032E2TM-332E2TM-4232E2TM-432E2TM-532-

$ 76 78 86 93 99 107 $ 83 86 94 105 110 119

Markerboard Price (-N)

Markerboard with Tray (-M)

$214 227 244 259 276 292 $322 343 364 388 415 437

$231 244 261 276 293 309 339 360 381 405 432 454

Feature

To Order, Specify:

• Includes one insert and segment trim strip or markerboard tray.

1) Product number, including:

1 Markerboard Option: Specification Tips

E2TM

• For markerboard installation allow clearance above panel equal to height of insert. • Must be used with monolithic core panel and base insert, separately specified. • Maximum of 4 upper inserts is allowed per panel side. • Base and/or upper insert combinations may vary per panel side. • Markerboard cleaner & conditioner, order service part #7031-7001. • Order markerboard with tray in lower application to protect lower fabric insert. Product marked with this symbol available as GSA open market.

22

April 2008 / USA

Class AC – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

N Markerboard with segment trim strip M Markerboard with tray 2) Fabric/colorway (for fabric insert). 3) Trim color for segment trim strip or markerboard tray. $23 upcharge (list) for Metallic trim color.

UniGroup Too Price List

This page intentionally blank

April 2008 / USA

23

UniGroup Too Price List

Glazed Monolithic Panel with Square Painted Top Cap UniGroup Too

Glazed

Features

Specification Tips

• Includes non-powered or powered panel assembly, square top cap with aligner, with or without one-piece base raceway cover, 1.6 hinge kits, side trim rails, leveling glides and carpet gripper; power distribution assembly/flex connector(s) when power is specified. .6 top cap end plugs and base raceway end caps are shipped with each panel. Order additional as necessary. • Panel thickness is 2′′(51mm). • Base raceway is 4′′(102mm) high. • Powered raceway with or without raceway cover requires modified catalog number and list price. • Powered panels are available for countries that utilize 120 volt 60 hertz electrical systems and U.S. configured plugs and outlets. • Does not accept top feed modules. • Shipped with unassembled top cap, base raceway cover and side trim rails.

• Panels will accept glazed add-on panels up to a combined height of 80″(2032mm). For aesthetic consistency, specify UniGroup Too add-on panels. • Flex connectors provided for powered monolithic panels accommodate straight in-line, inside 90°, and inside 120° conditions (if applicable). • Receptacles for powered panels must be specified separately. • Raceway cover must be separately specified for option -E (no raceway cover). • If 90° top cap for four-way and 120° top cap for three-way are not specified, additional top cap end plugs will need to be ordered. • Additional top cap end plugs and base raceway end caps will need to be specified if finish posts are not ordered.

To Order, Specify:

E2GN-B

1) Product number. 2) Glazing finish color. 3) Trim color raceway cover. $23 upcharge (list) for Metallic trim color. 4) Trim color for frame, top cap and side trim rails. $23 upcharge (list) forMetallic trim color.

Non-Powered Panel with Base Raceway Cover, see opposite page. The following options require modification of the 3-Circuit Non-Powered (Example: E2GN-462-B) product numbers and list prices shown on opposite page:

Panel Width

3-Circuit Powered (Example: E2GP-462-B)

6-Circuit Powered (Example: E2GP-462-6)

3-Circuit Powered without Base Raceway Cover (Example: E2GP-462-BE)

6-Circuit Powered without Base Raceway Cover (Example: E2GP-462-6E)

or

or

NYC 6-Circuit Powered (Example: E2GP-462-6Y)

NYC 3-Circuit Powered without Base Raceway Cover (Example: E2GP-462-BYE)

NYC 6-Circuit Powered without Base Raceway Cover (Example: E2GP-462-6YE)

Non-Powered without Base Raceway Cover (Example: E2GN-462-BE)

or

or

NYC 3-Circuit Powered (Example: E2GP-462-BY)

Deduct:

Add:

Add:

Add:

Add:

24′′(610mm)

-$42

$155

$276

$103

$224

30′′(762mm)

-44

155

276

100

221

36′′(914mm)

-48

155

276

90

211

42′′(1067mm)

-53

155

276

85

206

48′′(1219mm)

-56

155

276

80

201

60′′(1524mm)

-66

155

276

67

188

NOTES: • Powered panels with raceway covers ship with receptacle ports in the base raceway cover. Receptacle ports on the raceway cover measure 2.35 ′′(60mm) top-to-bottom and 2.88 ′′(73mm) side-to-side. • Non-powered panels ship without receptacle ports in the base raceway cover. • Powered panels with Power Distribution Assemblies (PDA) but without raceway covers require separately specified base raceway covers for power and communication port locations other than the standard powered base raceway cover. • New York City (NYC) electrical applications require field installation of PDA. • New York Port Authority (NYPA) electrical applications require metal raceway covers. To order, specify NYC powered panels without raceway cover and separately specify metal covers through Haworth e-Parts. • Some building codes may restrict the use of panel heights greater than 69 ′′(1753mm). Consult your local code authority to assure that the furniture layout is compliant. • For International Power, specify non-powered panels and use Power Logic components. See Specification Guide for more information on Power Logic. • For Chicago power, specify non-powered panels without a base raceway cover and separately specify Chicago power retrofit kit.

24

April 2008 / USA

Class AC – GSA: Open Market Canadian Conversion Factor: Refer to haworth.com/Canada

UniGroup Too Price List

Glazed Monolithic Panel with Square Painted Top Cap UniGroup Too Actual Height Glazed

Width

Non-Powered Number

64′′(1626mm)

24′′(610mm) E2GN-262- B 30′′(762mm) E2GN-3062- B 36′′(914mm) E2GN-362- B 42′′(1067mm) E2GN-4262- B 48′′(1219mm) E2GN-462- B 60′′(1524mm) E2GN-562- B 72′′(1829mm) 24′′(610mm) E2GN-270- B 30′′(762mm) E2GN-3070- B 36′′(914mm) E2GN-370- B 42′′(1067mm) E2GN-4270- B 48′′(1219mm) E2GN-470- B 60′′(1524mm) E2GN-570- B 80′′(2032mm) 24′′(610mm) E2GN-278- B 30′′(762mm) E2GN-3078- B 36′′(914mm) E2GN-378- B 42′′(1067mm) E2GN-4278- B 48′′(1219mm) E2GN-478- B 60′′(1524mm) E2GN-578- B List price shown is for a non-powered panel with base raceway cover.

Clear or Bronze Price

Frosted Price

$ 960 1153 1181 1324 1425 1661 $1025 1230 1255 1416 1521 1774 $1242 1478 1505 1697 1822 2101

$1128 1321 1440 1583 1684 1920 $1193 1398 1514 1675 1780 2033 $1410 1646 1764 1956 2081 2360

Product marked with this symbol available as GSA open market.

Class AC – GSA: Open Market Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

25

UniGroup Too Price List

Monolithic Fabric Add-On Panel UniGroup Too Actual Height Fabric

E2AM

NOTE: This panel has fabric/ colorway restrictions, see systems fabrics/ color legend.

26

April 2008 / USA

16′′(406mm)

Width

Number

Fabric Grade A B

C

D

E

F

G

24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 60′′(1524mm)

E2AM-216 E2AM-3016 E2AM-316 E2AM-4216 E2AM-416 E2AM-516

$375 390 406 422 439 475

$463 478 516 532 549 585

$505 520 566 582 599 635

$515 530 578 594 611 647

$527 542 588 604 621 657

$537 552 600 616 633 669

$409 424 452 468 485 521

Features

To Order, Specify:

• Includes panel, vertical connector (bayonet), light block, side trim rails, two full hinge sets and top cap clips. • Fabric add-on panels may be installed above straight fabric and laminate base or fabric add-on panels. • Both sides in same fabric; one color or different color each side. • For mixed fabric surfaces, specify fabric/color for each fabric surface and price at higher grade. • Each base panel will accept two add-on panels. • Lower Level add-on panel will accept overhead components (load bearing). Second add-on panel (top) is non-load bearing. • Utilizes top cap from base panel. • Same construction as UniGroup Too Basic Monolithic fabric panel.

1) Product number.

Specification Tips • Add-on panels may be stacked a maximum of two high above a UniGroup Too base panel. • Add-on panel must match panel width. • Combination of panel and add-on panel cannot exceed 80′′(2032mm) in height. • Cannot be used above doors or glazed panels. • Base and add-on panel combinations should match existing base panel heights so that end-of-runs and finish posts can be used without field modification. • Finish posts may be used, separately specified. • Full-height side trim rails required for end-of-run conditions with a base panel and one add-on panel, separately specified. • For two high add-on panel applications specify separately full-height side trim rail for base panel and one high add-on, for two high panel add-on location use side trim rail that ships with add-on panel. See Specification Guide for application guidelines. • Clerestory can be added above fabric add-on panel. See Specification Guide for application guidelines.

Class AC – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

2) Fabric/colorway for add-on panel side one. 3) Fabric/colorway for add-on panel side two. 4) Trim color for side trim rails and trim strip. $23 upcharge (list) for Metallic trim color.

UniGroup Too Price List

Glazed Add-On Panel UniGroup Too Actual Height Glazed

16′′(406mm)

Width

Number 1

Clear/Bronze/ Frosted Price

24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 60′′(1524mm)

E2AG-216E2AG-3016E2AG-316E2AG-4216E2AG-416E2AG-516-

$562 583 607 628 652 681

Features

E2AG

• Includes panel, vertical connector (bayonet), light block, side trim rails, two full hinge sets and top cap clips. • Utilizes top cap from monolithic panel. • Glazed add-on panels may be installed above glazed, fabric, laminate, fabric add-on or glazed add-on panels. • Glazed add-on panels will not accept any load bearing components. • Glazing material for English Reeded, Checks Mix, and Vertical Moire is textured on one side only. Recommend installing the textured side to face the interior of the workstation.

English Reeded Price

Checks Mix/ Vertical Moire Price

$630 664 699 748 821 902

$ 726 759 795 855 944 1053

To Order, Specify: 1) Product number, including:

1 Application Designation: F

Glazed add-on panel above fabric base panel

G Glazed add-on panel above glazed or glazed add-on panel, add $22 list 2) Glazing color or glass pattern. 3) Trim color for frame, side trim rails and trim strip. $23 upcharge (list) for Metallic trim color.

Specification Tips • Add-on panels may be stacked a maximum of two high above a monolithic panel. • Add-on panel width must match base panel width. • Combination of base panel and add-on panel cannot exceed 80′′(2032mm). • Cannot be used above doors. • Does not accept top feed modules. • Add-on panels may be retrofitted in the field for use on glazed or fabric monolithic panels. • To convert a glazed add-on above a fabric monolithic base panel to a glazed add-on above a glazed base panel (vice versa), a vertical connector (bayonet) retrofit kit is available. Order separately through Haworth e-Parts. • Finish posts may be used, separately specified. • Full-height side trim rails required for end-of-run conditions with a base panel and one add-on panel, separately specified. • For two high add-on panel applications specify separately full-height side trim rail for base panel and one high add-on, for two high panel add on location use side trim rail that ships with add-on panel. • Clerestory can be added above glazed add-on panel. See Specification Guide for application guidelines. Product marked with this symbol available as GSA open market.

Class AC – GSA: Open Market Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

27

UniGroup Too Price List

Doors with Square Painted Top Cap UniGroup Too Actual Height Single Door — Laminate

80′′(2032mm)

Width

Number

36′′(914mm) 42′′(1067mm)

E2DS-3678-B E2DS-4278-B

To Order, Specify:

• Includes complete panel assembly [hinge sets, carpet gripper, door jamb, side rails, leveling glides and trim, hollow core door (1 5/8′′(41mm) thick), door hinges, hardware, brushed chrome knobs or ADA lever with lockset and keys, and threshold]. • Door shipped with left-hand swing and can be field-changed for right-hand swing. • Both sides of door covered in same laminate surface color. • No power/communications in base raceway.

1) Product number, including:

April 2008 / USA

$1774 1884

1 Handle Designation: K Knob H ADA Lever, add $145 list 2) Laminate surface color. 3) Trim color for raceway covers and glide housings, $23 upcharge (list) for Metallic trim color.

• Door may be placed a maximum of 24′′(610mm) from supporting panels at 90°. • Will not accept add-on panel.

4) Trim color for door jamb, top cap and side trim rails, $23 upcharge (list) for Metallic trim color.

Door Opening Clearance

NOTES:

Door Size

Height

Width

3678

78′′(1981mm)

28 3/4′′(730mm)

4278

78′′(1981mm)

34 3/4′′(883mm)

(Left-hand swing)

28

Price L L

Features

Specification Tips

E2DS

1

Some building codes may restrict the use of panel heights greater than 69 ′′(1753mm). Consult your local code authority to assure that the furniture layout is compliant prior to installation. Most building codes for new buildings require a minimum clear door width of 32 ′′(813mm). To meet this requirement, the 42 ′′(1067mm) door must be ordered.

Class AC – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

UniGroup Too Price List

if Panel Attached Screen UniGroup Too

if Panel Attached Screen

Height

Width

Description

Number

Price

47′′(1194mm) 52′′(1321mm) 63′′(1600mm) 47′′(1194mm) 52′′(1321mm) 63′′(1600mm) 52′′(1321mm) 63′′(1600mm)

48′′(1219mm)

Fabric

48′′(1219mm)

Frosted Insert

48′′(1219mm)

Perforated Metal

BBP-4748-FH BBP-5248-FH BBP-6348-FH BBP-4748-GH BBP-5248-GH BBP-6348-GH BBP-5248-PH BBP-6348-PH

$ 815 860 906 $ 999 1058 1116 $1087 1146

Features BBP-FH BBP-GH BBP-PH

• Includes screen, two non-locking casters on post legs and attachment brackets. • Fabric and perforated metal insert screens have no acoustical or tackable value. • Screens are non-load bearing. • Magnets can be used with perforated metal inserts. • Frosted insert is identical to frosted and textured acrylic material used in if desktop screens. • Brackets are shipped unassembled.

Specification Tips • Screens can mount on any width panel but panel runs must be at least 48′′(1219mm). • Screens mount on a panel taller than height of screen only. • Screen adds 2′′(51mm) to panel width in stored position. • Screen extends 42′′(1067mm) from end of panel in fully extended position. • Screens mount parallel with panel, off panel end only. • Screen adds 2′′(51mm) to panel thickness. • Bracket is panel specific for UniGroup Too, UniGroup and PLACES. • Panel attached screen brackets may interfere with components mounted to opposite side of panel. • Fabric screen insert available in warm and cool neutral only. • Screens are non-handed; brackets can be attached to either side. • See Specification Guide for additional information.

Class IF – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

To Order, Specify: Fabric Insert 1) Product number. 2) Screen fabric insert color. FB-1 Warm Neutral FB-2 Cool Neutral 3) Metallic trim color for frame. 4) Trim color for panel attachment brackets. 5) Trim color for casters.

Frosted Insert 1) Product number. 2) Trim color for frame. 3) Trim color for panel attachment brackets. 4) Metallic trim color for casters. 5) Metal trim color for casters.

Metal Insert 1) Product number. 2) Trim color for frame. 3) Trim color for perforated metal insert. 4) Trim color for panel attachment brackets. 5) Metallic trim color for casters.

April 2008 / USA

29

UniGroup Too Price List

Panel Accessories UniGroup Too

90° Full-Height Finish Post — Square Painted Top Cap

Actual Height

Number

32′′(813mm) 40′′(1016mm) 48′′(1219mm) 56′′(1422mm) 64′′(1626mm) 72′′(1829mm) 80′′(2032mm)

E2 E2 E2 E2 E2 E2 E2

1 C-30 C-38 C-46 C-54 C-62 C-70 C-78

Painted Price

Fabric Price

$68 72 76 80 84 88 92

$70 74 78 82 86 90 94

Feature

To Order, Specify:

• Includes 90° vertical cover, square painted top cap and base raceway cover.

1) Product number, including:

1 Surface Finish: Specification Tips • For use with equal height panels in a 90°, 2-Way condition. • For use with UniGroup Too square painted top cap panels. • Required by UL for covering base raceway flexible and Straight power connectors when power connector covers are not used.

E2FC E2PC

P

Painted

F

Fabric

2) Paint or fabric color for finish post. $14 upcharge (list) for Metallic trim color. 3) Trim color for raceway cover. $14 upcharge (list) for Metallic trim color. 4) Trim color for top cap. $14 upcharge (list) for Metallic trim color.

90° Variable-Height Finish Post 32′′(813mm) 40′′(1016mm) — Square Painted Top Cap

E2 E2 E2 E2 E2 E2

48′′(1219mm) 56′′(1422mm) 64′′(1626mm) 72′′(1829mm)

C-30-V C-38-V C-46-V C-54-V C-62-V C-70-V

$ 80 84 88 92 96 100

$ 82 86 90 94 98 102

Feature

To Order, Specify:

• Includes 90° vertical cover, square painted top cap and base raceway cover.

1) Product number, including:

1 Surface Finish: Specification Tips • For use with multiple height panels in a 90°, 2-Way condition; specify height to match lowest panel height. • For use with UniGroup Too square painted top cap panels. • Required by UL for covering base raceway power connectors when power connector covers are not used. E2FC-V E2PC-V

Painted

F

Fabric

2) Paint or fabric color for finish post. $14 upcharge (list) for Metallic trim color. 3) Trim color for raceway cover. $14 upcharge (list) for Metallic trim color. 4) Trim color for top cap. $14 upcharge (list) for Metallic trim color.

90° Power Connector Cover — Square Profile

E2PC-90-B

30

P

April 2008 / USA

Height

Number

Price

4′′(102mm)

E2PC-90-B

$52

Features

To Order, Specify:

• Includes six covers. • For use with UniGroup Too square painted top cap panels. • Required by UL for covering power connector 90° panel condition when finish post is not used.

1) Product number.

Class AC – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

2) Trim color. $13 upcharge (list) for Metallic trim color.

UniGroup Too Price List

Panel Accessories UniGroup Too

120° Full-Height Finish Post — Square Painted Top Cap

Actual Height

Number

32′′(813mm) 40′′(1016mm) 48′′(1219mm) 56′′(1422mm) 64′′(1626mm) 72′′(1829mm) 80′′(2032mm)

E2 E2 E2 E2 E2 E2 E2

1 A-30 A-38 A-46 A-54 A-62 A-70 A-78

Painted Price

Fabric Price

$71 75 79 83 87 91 95

$75 80 83 87 91 95 99

Feature

To Order, Specify:

• Includes 120° vertical cover, square painted top cap and base raceway cover.

1) Product number, including:

1 Surface Finish: Specification Tips • For use with equal height panels in a 120°, 2-Way condition. • For use with UniGroup Too square top cap panels. • Required by UL for covering base raceway power connectors when power connector covers are not used.

Painted

F

Fabric

2) Paint or fabric color for finish post. $14 upcharge (list) for Metallic trim color. 3) Trim color for raceway cover. $14 upcharge (list) for Metallic trim color.

E2FA E2PA

120° Variable-Height Finish Post — Square Painted Top Cap

P

3) Trim color for top cap. $14 upcharge (list) for Metallic trim color. 32′′(813mm) 40′′(1016mm) 48′′(1219mm) 56′′(1422mm) 64′′(1626mm) 72′′(1829mm)

E2 E2 E2 E2 E2 E2

A-30-V A-38-V A-46-V A-54-V A-62-V A-70-V

$ 83 87 91 95 99 103

$ 87 92 95 99 103 107

Feature

To Order, Specify:

• Includes 120° vertical cover, square painted top cap and base raceway cover.

1) Product number, including:

1 Surface Finish: Specification Tips • For use with multiple height panels in a 120°, 2-Way condition; specify height to match lowest panel height. • For use with UniGroup Too square painted top cap panels. • Required by UL for covering base raceway power connectors when power connector covers are not used.

Painted

F

Fabric

2) Paint or fabric color for finish post. $14 upcharge (list) for Metallic trim color. 3) Trim color for raceway cover. $14 upcharge (list) for Metallic trim color. 4) Trim color for top cap. $14 upcharge (list) for Metallic trim color.

E2FA-V E2PA-V

120° Power Connector Cover

P

Height

Number

Price

4′′(102mm)

E2PC-120-B

$52

Features

To Order, Specify:

• Includes six covers. • For use with UniGroup Too square painted top cap panels. • Required by UL for covering power connector 120° panel condition when finish post is not used.

1) Product number. 2) Trim color. $13 upcharge (list) for Metallic trim color.

E2PC-120-B

Specification Tip • Can also be used with UniGroup and PLACES.

Class AC – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

31

UniGroup Too Price List

Panel Accessories UniGroup Too

180° Full-Height Finish Post — Square Painted Top Cap

Actual Height

Number

32′′(813mm) 40′′(1016mm) 48′′(1219mm) 56′′(1422mm) 64′′(1626mm) 72′′(1829mm) 80′′(2032mm)

E2 E2 E2 E2 E2 E2 E2

1 S-30 S-38 S-46 S-54 S-62 S-70 S-78

Painted Price

Fabric Price

$55 64 69 70 72 76 81

$57 66 71 72 74 80 84

Feature

To Order, Specify:

• Includes 180° vertical cover, square painted top cap and base raceway cover.

1) Product number, including:

1 Surface Finish: Specification Tips • For use with equal height panels in a 180°, 3-Way condition. • For use with panels with UniGroup Too square painted top cap. • Required by UL for covering base raceway power connectors when power connector covers are not used. E2FS E2PS

Painted

F

Fabric

2) Paint or fabric color for finish post. $14 upcharge (list) for Metallic trim color. 3) Trim color for raceway cover. $14 upcharge (list) for Metallic trim color. 4) Trim color for top cap. $14 upcharge (list) for Metallic trim color.

180° Variable-Height Finish Post — Square Painted Top Cap

32′′(813mm)

E2 E2 E2 E2 E2 E2 E2 E2 E2 E2 E2 E2 E2 E2 E2 E2 E2 E2

40′′(1016mm)

48′′(1219mm)

56′′(1422mm)

64′′(1626mm)

72′′(1829mm)

E2FS-V ELPS-V

S-30-V1 S-30-V2I S-30-V2L S-38-V1 S-38-V2I S-38-V2L S-46-V1 S-46-V2I S-46-V2L S-54-V1 S-54-V2I S-54-V2L S-62-V1 S-62-V2I S-62-V2L S-70-V1 S-70-V2I S-70-V2L

-V1

-V2I

April 2008 / USA

-V2L

$67 67 67 $76 76 76 $81 81 81 $82 82 82 $84 84 84 $88 88 88

$69 69 69 $78 78 78 $83 83 83 $84 84 84 $86 86 86 $92 92 92

Features

To Order, Specify:

• Includes 180° vertical cover, square painted top cap and base raceway cover. • Includes top cap with one or two alignment tabs; specify accordingly.

1) Product number, including:

Specification Tips

32

P

• For use with multiple height panels in a 180°, 3-Way condition; specify height to match lowest panel height. • Product specification must reflect number of top cap alignment tabs for lowest like panel heights in an ‘‘I’’ or ‘‘L’’ condition; see Product Application Guidelines for details. • Top cap alignment tabs are for dedicated applications and are not field removable; -V1, -V2I, -V2L. • For use with panels with UniGroup Too square painted top cap. • Required by UL for covering base raceway power connectors when power connector covers are not used.

Class AC – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

1 Surface Finish: P

Painted

F

Fabric

2) Paint or fabric color for finish post. $14 upcharge (list) for Metallic trim color. 3) Trim color for raceway cover. $14 upcharge (list) for Metallic trim color. 4) Trim color for top cap. $14 upcharge (list) for Metallic trim color.

UniGroup Too Price List

Panel Accessories UniGroup Too

180° Power Connector Cover

PPC-180-B

180° Vertical Cover only, (no top cap or base raceway cover)

Height

Number

Price

4′′(102mm)

PCC-180-B

$55

Features

To Order, Specify:

• Includes six covers. • For use with UniGroup Too square painted top cap panels. • Required by UL for covering power connector 180° panel condition when finish post is not used.

1) Product number.

Specification Tip • Can also be used with UniGroup and PLACES.

Actual Height

Number

8′′(203mm) 16′′(406mm) 24′′(610mm) 32′′(813mm) 40′′(1016mm) 48′′(1219mm)

E2 E2 E2 E2 E2 E2

1 S-08-N S-16-N S-24-N S-32-N S-40-N S-48-N

Painted Price

Fabric Price

$20 25 30 35 44 49

$22 27 32 37 46 51

Feature

To Order, Specify:

• Includes 180° vertical cover only.

1) Product number, including:

Specification Tips

1 Surface Finish:

• For use with separately specified 180° finish post or 90° top cap. • See Specification Guide for details. E2PS E2FS

P

Painted

F

Fabric

2) Paint or fabric color for finish post. $13 upcharge (list) for Metallic trim color.

90° Square Painted Top Cap for 2-Way, 3-Way, 4-Way

E2CC-90

2) Trim color. $13 upcharge (list) for Metallic trim color.

Number

Price

E2CC-90-1 E2CC-90-2I E2CC-90-2L E2CC-90-3 E2CC-90-4

$40 40 40 40 40

Features

To Order, Specify:

• Includes square painted top cap for 90° or 180° panel intersection. • Includes one, two, three, or four alignment tabs; specify accordingly.

1) Product number. 2) Trim color. $14 upcharge (list) for Metallic trim color.

Specification Tips • Typically used with separately specified 180° Vertical Cover unless used in a 4-way condition with equal height panels. • Product specification must reflect number of top cap alignment tabs for like panel heights in an ‘‘I’’, ‘‘L’’, ‘‘T’’, or ‘‘X’’ condition. • See Product Specification Guide for details. • Top cap alignment tabs are for dedicated applications and are not field removable.

-1

-2I

-2L

Class AC – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

-3

-4

April 2008 / USA

33

UniGroup Too Price List

Panel Accessories UniGroup Too

120° Square Painted Top Cap for 2-Way or 3-Way

Number

Price

E2CA-120-1 E2CA-120-2 E2CA-120-3

$40 40 40

Features

To Order, Specify:

• Includes square painted top cap for 120° panel intersection. • Includes one, two or three alignment tabs; specify accordingly.

1) Product number. 2) Trim color. $14 upcharge (list) for Metallic trim color.

Specification Tips

E2CA-120

• Product specification must reflect number of top cap alignment tabs for like panel heights in 120° 2-Way or 3-Way condition. • For use in 120° 3-Way condition with equal height panels; specify (-3) option. • For use in 120° 3-way condition with one high and two equal height lower panels; specify (-2) option. • See Product Specification Guide for details. • Top cap alignment tabs are for dedicated applications and are not field removable. • Not for use with the 180° Vertical Cover.

-1

34

April 2008 / USA

-2

Class AC – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

-3

UniGroup Too Price List

Panel Accessories UniGroup Too Number

Price

UniGroup Too Top Cap Aligner E2AL-1 Features

$22

• Includes one top cap aligner. • For use with UniGroup Too square painted top cap in an in-line panel condition. • Top cap alignment tabs are for dedicated applications and not field removeable.

To Order, Specify: 1) Product number. 2) Trim color. $13 upcharge (list) for Metallic trim color.

Note: One top cap aligner is included with each panel. E2AL-1

Class AC

UniGroup Too Top Cap End Plug

E2EC-1

$16

Features • Includes one top cap and end plug. • For use with UniGroup Too square top cap panels. • Additional top cap end plugs may be needed if finish posts are not specified.

To Order, Specify: 1) Product number. 2) Trim color. $6 upcharge (list) for Metallic trim color.

Note: .6 top cap end plugs are included with each panel. Order additional as necessary. E2EC-1

Class AC

Base Raceway End Cap

Height

Number

4′′(102mm)

EC-10-B

Price $18

Features

To Order, Specify:

• Includes ten end caps. • For use at base raceway for end-of-run panel condition.

1) Product number.

Note: .6 end caps included with every panel. Order additional as necessary.

2) Trim color. $14 upcharge (list) for Metallic trim color.

EC-10-B

Class AA

SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

35

UniGroup Too Price List

Panel Accessories UniGroup Too

Full Height Side Trim Rail — for use with Add-On Panels

Height

Base Panel Height/ Add-On Panel

Number

Price

48′′(1219mm) 56′′(1422mm) 64′′(1626mm) 72′′(1829mm) 80′′(2032mm)

32′′(813mm)/16′′(406mm) 40′′(1016mm)/16′′(406mm) 48′′(1219mm)/16′′(406mm) 56′′(1422mm)/16′′(406mm) 64′′(1626mm)/16′′(406mm)

SREH-3016 SREH-3816 SREH-4616 SREH-5416 SREH-6216

$55 73 77 85 87

Feature

To Order, Specify:

• Includes one full height side trim rail.

1) Product number.

Specification Tips

2) Trim color. $14 upcharge (list) for Metallic trim color.

• For use with base panel and one add-on panel. • For two high add-on panel applications specify separately full-height side trim rail for base panel and one high add-on, for two high panel location use side trim rail that ships with add-on panel. See Specification Guide for application guidelines. SREH

Side Trim Rail

SRE

Panel Height

Number

Price

32′′(813mm) 40′′(1016mm) 48′′(1219mm) 56′′(1422mm) 64′′(1626mm) 72′′(1829mm) 80′′(2032mm)

SRE-30 SRE-38 SRE-46 SRE-54 SRE-62 SRE-70 SRE-78

$56 56 63 63 67 72 74

Feature

To Order, Specify:

• Includes one side trim rail.

1) Product number.

Specification Tips

2) Trim color. $14 upcharge (list) for Metallic trim color.

• Specify two side trim rails for each condition. • Two side trim rails are included with each panel. Order as replacement only. • For use with UniGroup Too panels only.

36

April 2008 / USA

Class AA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

UniGroup Too Price List

Panel Accessories UniGroup Too

Hinges

Panel Height

Number

Price

32′′(813mm) 40′′(1016mm) 48′′(1219mm) 56′′(1422mm) 64′′(1626mm) 72′′(1829mm) 80′′(2032mm)

HE-30 HE-38 HE-46 HE-54 HE-62 HE-70 HE-78

$ 9 9 11 11 12 15 16

Features

To Order, Specify:

• Includes one hinge set for one side of trim rail. • One hinge set connects every two panels for angular connections. • Two hinge sets are used for straight-line conditions. • For replacement only. Hinges are included with panels.

1) Product number. 2) Trim color.

HE

Specification Tip • For use with UniGroup Too panels only.

Wall Track

WT

Wall Mount Kit

WMK

Height

Depth

Width

Number

Price

60′′(1524mm) 72′′(1829mm) 84′′(2134mm)

3/4′′(19mm)

5/8′′(16mm)

WT-60 WT-72 WT-84

$101 123 137

Features

To Order, Specify:

• Includes two wall tracks and attachment screws (#10 2 1/2′′ long). • For attachment of components to structural walls. • See installation instructions for proper mounting.

1) Product number.

Specification Tip

2) Trim color for screws. $13 upcharge (list) for Metallic trim color. 3) Trim color for track. $13 upcharge (list) for Metallic trim color.

• Not for use with up-mount overhead storage unit.

Height

Number

Price

32′′(813mm) 40′′(1016mm) 48′′(1219mm) 56′′(1422mm) 64′′(1626mm) 72′′(1829mm) 80′′(2032mm)

WMK-32 WMK-38 WMK-46 WMK-54 WMK-62 WMK-70 WMK-78

$ 58 69 79 88 102 128 130

Features

To Order, Specify:

• Includes wall-mount channel, hinges and screws. • For mounting panels, with or without add-on panel, to a structural wall. • Adds 1/4′′(6mm) to the panel width.

1) Product number. 2) Trim color. $14 upcharge (list) for Metallic trim color.

Specification Tip • Must be properly anchored to a structural wall.

Class AA SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

37

UniGroup Too Price List

Panel Accessories UniGroup Too

T-Mount Kits

E2TK

Class AC

Height

Number

Price

32′′(813mm) 40′′(1016mm) 48′′(1219mm) 56′′(1422mm) 64′′(1626mm) 72′′(1829mm) 80′′(2032mm)

E2TK-30 E2TK-38 E2TK-46 E2TK-54 E2TK-62 E2TK-70 E2TK-78

$ 78 83 96 105 110 128 130

Features

To Order, Specify:

• Includes pre-drilled side rail, center-mount brackets, end-mount brackets, light block extrusions, glide housing, and screws. • Brackets included for both center- and end-mount T-conditions. • Connects two panels in a T-condition. T-mount can attach to a base panel and one fabric add-on panel. Configuration coming off of a T-mount cannot contain add-on panels.

1) Product number. 2) Trim color. $14 upcharge (list) for Metallic trim color.

Specification Tips • Both panels in a T-mount condition must be of equal height. • Cannot mount on glazed panels, glazed add-on panels or doors. • Must be used with UniGroup Too panels only. E2CH-8

Coat Hook

$81

Features

To Order, Specify:

• Includes eight hooks. • For use with UniGroup Too square painted top cap panels.

1) Product number. 2) Trim color. $14 upcharge (list) for Metallic trim color.

E2CH-8

Class AC HAB-0001

Seismic Anchoring Bracket

$125

Features

To Order, Specify:

• Includes package of six formed steel brackets. • For seismic anchoring of UniGroup Too, UniGroup and PLACES panels.

1) Product number. (No finish specification required.)

HAB

Class BA 7031-0501

Friction Pad Feature

To Order, Specify:

• Includes six pads.

1) Product number. (No finish specification required.)

Specification Tip • Attaches to bottom of glide to prevent movement of panels on hard surface flooring.

7031-0501

Class BA

2/90 Sign Systems

2/90 Sign Systems is a recommended signage program for use with Haworth Systems. Signage options include ADA-compliant panel-mounted name signs, department signs, building directories, in/out boards, restroom and no smoking signs. For inquiries, catalogs or orders, contact System 2/90 directly at 1-800-777-4310, fax (616) 656-4300, P.O. Box 888289, Grand Rapids, MI 49588-8289.

38

April 2008 / USA

$6

SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

UniGroup Too Price List

Panel Accessories – Retrofit Kits for use with UniGroup Too and UniGroup Panels

Square Painted Top Caps For UniGroup Too and UniGroup Fabric and Laminate Panels, UniGroup Too Fabric Add-On Panels and Legacy UniGroup Videne Panels

E2TS-U

Width

Number

Price

12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm)

E2TS-12-U E2TS-18-U E2TS-24-U E2TS-30-U E2TS-36-U E2TS-42-U E2TS-48-U E2TS-54-U E2TS-60-U

$42 47 52 57 62 67 72 79 84

Feature

To Order, Specify:

• Includes square painted top cap, clips, aligner, and .6 end caps.

1) Product number.

Specification Tips

2) Trim color. $13 upcharge (list) for Metallic trim color.

• To be used with straight top cap panels only. • Not to be used with UniGroup expanded top cap raceway.

Square Painted Top Caps For UniGroup Too and UniGroup Doors and Glazed Panels, UniGroup Open-Frame Panels, UniGroup Too Glazed Add-On Panels, and UniGroup Glazed and FabricAdd-OnPanels

12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm)

E2TS-12-T E2TS-18-T E2TS-24-T E2TS-30-T E2TS-36-T E2TS-42-T E2TS-48-T E2TS-54-T E2TS-60-T

Feature

To Order, Specify:

• Includes square painted top cap, clips, aligner, and .6 end caps.

1) Product number.

Specification Tips E2TS-T

• To be used with straight top cap panels only. • Not to be used with UniGroup expanded top cap raceway.

Trim Strip for UniGroup Fabric and Glazed Add-On Panels

12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm)

E2UR-A

$42 47 52 57 62 67 72 79 84

2) Trim color. $13 upcharge (list) for Metallic trim color.

E2UR-12-A E2UR-18-A E2UR-24-A E2UR-30-A E2UR-36-A E2UR-42-A E2UR-48-A E2UR-54-A E2UR-60-A

$20 20 22 28 30 32 34 34 38

Feature

To Order, Specify:

• Includes trim strip.

1) Product number.

Specification Tip

2) Trim color. $13 upcharge (list) for Metallic trim color.

• Used to retrofit existing fabric and glazed add-on panels to match aesthetic appearance of UniGroup Too.

Class AC – SIN 711-1; Discount Group I Canadian Conversion Factor: Refertohaworth.com/Canada

April 2008 / USA

39

UniGroup Too Price List

Panel Accessories – Retrofit Kits for use with UniGroup Panels

90° Full-Height Finish Post — Square Painted Top Cap

Actual Height

Number

30′′(762mm) 37′′(940mm) 44′′(1118mm) 50′′(1270mm) 56′′(1422mm) 64′′(1626mm) 68′′(1727mm) 82′′(2083mm)

U2 U2 U2 U2 U2 U2 U2 U2

1 C-28 C-35 C-42 C-48 C-54 C-62 C-66 C-80

Painted Price

Fabric Price

$ 83 85 87 93 97 98 108 110

$ 85 88 90 97 99 101 111 114

Feature

To Order, Specify:

• Includes 90° vertical cover, square painted top cap and base raceway cover.

1) Product number, including:

1 Surface Finish: Specification Tips • For use with equal height UniGroup panels in a 90°, 2-Way condition with UniGroup Too square painted top cap. • To be used with straight top cap panels only. • Required by UL for covering base raceway power connectors when power connector covers are not used.

U2FC U2PC

P

Painted

F

Fabric

2) Paint or fabric color for finish post. $13 upcharge (list) for Metallic trim color. 3) Trim color for raceway cover. $13 upcharge (list) for Metallic trim color. 4) Trim color for top cap. $13 upcharge (list) for Metallic trim color.

90° Variable-Height Finish Post 30′′(762mm) 37′′(940mm) — Square Painted Top Cap

U2 U2 U2 U2 U2 U2 U2

44′′(1118mm) 50′′(1270mm) 56′′(1422mm) 64′′(1626mm) 68′′(1727mm)

C-28-V C-35-V C-42-V C-48-V C-54-V C-62-V C-66-V

$ 95 97 99 105 109 110 120

$ 97 100 102 109 111 113 123

Feature

To Order, Specify:

• Includes 90° vertical cover, square painted top cap and base raceway cover.

1) Product number, including:

1 Surface Finish: Specification Tips

U2FC-V U2PC-V

• For use with multiple height UniGroup panels in a 90°, 2-Way condition; specify height to match lowest panel height with UniGroup Too square painted top cap. • To be used with straight top cap panels only. • Required by UL for covering base raceway power connectors when power connector covers are not used.

P

Painted

F

Fabric

2) Paint or fabric color for finish post. $13 upcharge (list) for Metallic trim color. 3) Trim color for raceway cover. $13 upcharge (list) for Metallic trim color. 4) Trim color for top cap. $13 upcharge (list) for Metallic trim color.

40

April 2008 / USA

Class AC – SIN 711-1; Discount Group I Canadian Conversion Factor: Refertohaworth.com/Canada

UniGroup Too Price List

Panel Accessories – Retrofit Kits for use with UniGroup Panels

120° Full-Height Finish Post — Square Painted Top Cap

Actual Height

Number

30′′(762mm) 37′′(940mm) 44′′(1118mm) 50′′(1270mm) 56′′(1422mm) 64′′(1626mm) 68′′(1727mm) 82′′(2083mm)

U2 U2 U2 U2 U2 U2 U2 U2

1 A-28 A-35 A-42 A-48 A-54 A-62 A-66 A-80

Painted Price

Fabric Price

$ 95 100 104 110 111 113 124 127

$ 99 104 107 113 115 116 128 131

Feature

To Order, Specify:

• Includes 120° vertical cover, square painted top cap and base raceway cover.

1) Product number, including:

1 Surface Finish: Specification Tips

U2FA U2PA

• For use with equal height UniGroup panels in a 120°, 2-Way condition with UniGroup Too square painted top cap. • To be used with straight top cap panels only. • Required by UL for covering base raceway power connectors when power connector covers are not used.

P

Painted

F

Fabric

2) Paint or fabric color for finish post. $13 upcharge (list) for Metallic trim color. 3) Trim color for raceway cover. $13 upcharge (list) for Metallic trim color. 4) Trim color for top cap. $13 upcharge (list) for Metallic trim color.

120° Variable-Height Finish Post — Square Painted Top Cap

30′′(762mm) 37′′(940mm) 44′′(1118mm) 50′′(1270mm) 56′′(1422mm) 64′′(1626mm) 68′′(1727mm)

U2 U2 U2 U2 U2 U2 U2

A-28-V A-35-V A-42-V A-48-V A-54-V A-62-V A-66-V

$107 112 116 122 123 125 136

$111 116 119 125 127 128 140

Feature

To Order, Specify:

• Includes 120° vertical cover, square painted top cap and base raceway cover.

1) Product number, including:

1 Surface Finish: Specification Tips • For use with multiple height UniGroup panels in a 120°, 2-Way condition; specify height to match lowest panel height with UniGroup Too square painted top cap. • To be used with straight top cap panels only. • Required by UL for covering base raceway power connectors when power connector covers are not used. U2FA-V U2PA-V

P

Painted

F

Fabric

2) Paint or fabric color for finish post. $13 upcharge (list) for Metallic trim color. 3) Trim color for raceway cover. $13 upcharge (list) for Metallic trim color. 4) Trim color for top cap. $13 upcharge (list) for Metallic trim color.

Class AC – SIN 711-1; Discount Group I Canadian Conversion Factor: Refertohaworth.com/Canada

April 2008 / USA

41

UniGroup Too Price List

Panel Accessories – Retrofit Kits for use with UniGroup Panels

180° Full-Height Finish Post — Square Painted Top Cap

Actual Height

Number

30′′(762mm) 37′′(940mm) 44′′(1118mm) 50′′(1270mm) 56′′(1422mm) 64′′(1626mm) 68′′(1727mm) 82′′(2083mm)

U2 U2 U2 U2 U2 U2 U2 U2

1 S-28 S-35 S-42 S-48 S-54 S-62 S-66 S-80

Painted Price

Fabric Price

$ 68 74 79 85 86 89 93 100

$ 70 77 82 88 89 91 97 104

Feature

To Order, Specify:

• Includes 180° vertical cover, square painted top cap and base raceway cover.

1) Product number, including:

1 Surface Finish: Specification Tips • For use with equal height UniGroup panels in a 180°, 3-Way condition with UniGroup Too square painted top cap. • To be used with straight top cap panels only. • Required by UL for covering base raceway power connectors when power connector covers are not used. U2FS U2PS

P

Painted

F

Fabric

2) Paint or fabric color for finish post. $13 upcharge (list) for Metallic trim color. 3) Trim color for raceway cover. $13 upcharge (list) for Metallic trim color. 4) Trim color for top cap. $13 upcharge (list) for Metallic trim color.

42

April 2008 / USA

Class AC – SIN 711-1; Discount Group I Canadian Conversion Factor: Refertohaworth.com/Canada

UniGroup Too Price List

Panel Accessories – Retrofit Kits for use with UniGroup Panels

180° Variable-Height Finish Post — Square Painted Top Cap

Actual Height

Number

30′′(762mm)

U2 U2 U2 U2 U2 U2 U2 U2 U2 U2 U2 U2 U2 U2 U2 U2 U2 U2 U2 U2 U2 U2

1

37′′(940mm)

44′′(1118mm)

50′′(1270mm)

56′′(1422mm)

64′′(1626mm) U2FS-V U2PS-V

68′′(1727mm)

82′′(2083mm)

-V1

-V2I

-V2L

S-28-V1 S-28-V2I S-28-V2L S-35-V1 S-35-V2I S-35-V2L S-42-V1 S-42-V2I S-42-V2L S-48-V1 S-48-V2I S-48-V2L S-54-V1 S-54-V2I S-54-V2L S-62-V1 S-62-V2I S-62-V2L S-66-V1 S-66-V2I S-66-V2L S-80-V2I

Painted Price

Fabric Price

$ 80 80 80 $ 86 86 86 $ 91 91 91 $ 97 97 97 $ 98 98 98 $101 101 101 $105 105 105 $112

$ 82 82 82 $ 89 89 89 $ 94 94 94 $100 100 100 $101 101 101 $103 103 103 $109 109 109 $116

Features

To Order, Specify:

• Includes 180° vertical cover, square painted top cap and base raceway cover. • Includes top cap with one or two alignment tabs; specify accordingly.

1) Product number, including:

Specification Tips • For use with multiple height UniGroup panels in a 180°, 3-Way condition with UniGroup Too square painted top cap; specify height to match lowest panel height except in V2I condition. • To be used with straight top cap panels only. • Product specification must reflect number of top cap alignment tabs for lowest like panel heights in an ‘‘I’’ or ‘‘L’’ condition; refer to UniGroup Too Application Guidelines. • Top cap alignment tabs are for dedicated applications and are not field removable; -V1, -V2I, -V2L. • Required by UL for covering base raceway power connectors when power connector covers are not used.

Class AC – SIN 711-1; Discount Group I Canadian Conversion Factor: Refertohaworth.com/Canada

1 Surface Finish: P

Painted

F

Fabric

2) Paint or fabric color for finish post. $13 upcharge (list) for Metallic trim color. 3) Trim color for raceway cover. $13 upcharge (list) for Metallic trim color. 4) Trim color for top cap. $13 upcharge (list) for Metallic trim color.

April 2008 / USA

43

UniGroup Too Price List

Panel Accessories – Retrofit Kits for use with PLACES Panels

Square Painted Top Caps For all PLACES doors and panel types except Legacy Gabled, ObliqueandExpanded

E2TS-P

Width

Number

Price

12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm)

E2TS-12-P E2TS-18-P E2TS-24-P E2TS-30-P E2TS-36-P E2TS-42-P E2TS-48-P E2TS-54-P E2TS-60-P

$42 47 52 57 62 67 72 79 84

Feature

To Order, Specify:

• Includes square painted top cap, clips, aligner, and .6 end caps.

1) Product number.

Specification Tip • To be used with straight top cap panels only.

44

April 2008 / USA

Class AC – SIN 711-1; Discount Group I Canadian Conversion Factor: Refertohaworth.com/Canada

2) Trim color. $13 upcharge (list) for Metallic trim color.

UniGroup Too Price List

Panel Accessories – Retrofit Kits for use with PLACES Panels

90° Full-Height Finish Post — Square Painted Top Cap

Actual Height

Number

30′′(762mm) 37′′(940mm) 44′′(1118mm) 50′′(1270mm) 56′′(1422mm) 64′′(1626mm) 68′′(1727mm) 82′′(2083mm)

H2 H2 H2 H2 H2 H2 H2 H2

1 C-30 C-37 C-44 C-50 C-56 C-64 C-68 C-82

Painted Price

Fabric Price

$ 88 91 96 102 104 107 112 116

$ 91 93 100 105 107 110 117 119

Feature

To Order, Specify:

• Includes 90° vertical cover, square painted top cap and base raceway cover.

1) Product number, including:

1 Surface Finish: Specification Tips

H2FC H2PC

• For use with equal height PLACES panels in a 90°, 2-Way condition with UniGroup Too square painted top cap. • Not for use with legacy expanded panels. • To be used with straight top cap panels only. • Required by UL for covering base raceway flexible and Straight power connectors when power connector covers are not used.

P

Painted

F

Fabric

2) Paint or fabric color for finish post. $13 upcharge (list) for Metallic trim color. 3) Trim color for raceway cover. $13 upcharge (list) for Metallic trim color. 4) Trim color for top cap. $13 upcharge (list) for Metallic trim color.

90° Variable-Height Finish Post — Square Painted Top Cap

30′′(762mm) 37′′(940mm) 44′′(1118mm) 50′′(1270mm) 56′′(1422mm) 64′′(1626mm) 68′′(1727mm)

H2 H2 H2 H2 H2 H2 H2

C-30-V C-37-V C-44-V C-50-V C-56-V C-64-V C-68-V

$100 103 108 114 116 119 124

$103 105 112 117 119 122 129

Feature

To Order, Specify:

• Includes 90° vertical cover, square painted top cap and base raceway cover.

1) Product number, including:

1 Surface Finish: Specification Tips

H2FC-V H2PC-V

• For use with multiple height PLACES panels in a 90°, 2-Way condition; specify height to match lowest panel height with UniGroup Too square painted top cap. • Not for use with legacy expanded panels. • To be used with straight top cap panels only. • Required by UL for covering base raceway power connectors when power connector covers are not used.

P

Painted

F

Fabric

2) Paint or fabric color for finish post. $13 upcharge (list) for Metallic trim color. 3) Trim color for raceway cover. $13 upcharge (list) for Metallic trim color. 4) Trim color for top cap. $13 upcharge (list) for Metallic trim color.

Class AC – SIN 711-1; Discount Group I Canadian Conversion Factor: Refertohaworth.com/Canada

April 2008 / USA

45

UniGroup Too Price List

Panel Accessories – Retrofit Kits for use with PLACES Panels

120° Full-Height Finish Post — Square Painted Top Cap

Actual Height

Number

30′′(762mm) 37′′(940mm) 44′′(1118mm) 50′′(1270mm) 56′′(1422mm) 64′′(1626mm) 68′′(1727mm) 82′′(2083mm)

H2 H2 H2 H2 H2 H2 H2 H2

1 A-30 A-37 A-44 A-50 A-56 A-64 A-68 A-82

Painted Price

Fabric Price

$ 98 103 106 112 113 116 127 130

$102 106 109 116 118 119 131 134

Feature

To Order, Specify:

• Includes 120° vertical cover, square painted top cap and base raceway cover.

1) Product number, including:

1 Surface Finish: Specification Tips • For use with equal height PLACES panels in a 120°, 2-Way condition with UniGroup Too square painted top cap. • Not for use with legacy expanded panels. • To be used with straight top cap panels only. • Required by UL for covering base raceway power connectors when power connector covers are not used.

H2FA H2PA

P

Painted

F

Fabric

2) Paint or fabric color for finish post. $13 upcharge (list) for Metallic trim color. 3) Trim color for raceway cover. $13 upcharge (list) for Metallic trim color. 4) Trim color for top cap. $13 upcharge (list) for Metallic trim color.

120° Variable-Height Finish Post — Square Painted Top Cap

30′′(762mm) 37′′(940mm) 44′′(1118mm) 50′′(1270mm) 56′′(1422mm) 64′′(1626mm) 68′′(1727mm)

H2 H2 H2 H2 H2 H2 H2

A-30-V A-37-V A-44-V A-50-V A-56-V A-64-V A-68-V

$110 115 118 124 125 128 139

$114 118 121 128 130 131 143

Feature

To Order, Specify:

• Includes 120° vertical cover, square painted top cap and base raceway cover.

1) Product number, including:

1 Surface Finish: Specification Tips • For use with multiple height PLACES panels in a 120°, 2-Way condition; specify height to match lowest panel height with UniGroup Too square painted top cap. • Not for use with legacy expanded panels. • To be used with straight top cap panels only. • Required by UL for covering base raceway power connectors when power connector covers are not used. H2FA-V H2PA-V

46

P

Painted

F

Fabric

2) Paint or fabric color for finish post. $13 upcharge (list) for Metallic trim color. 3) Trim color for raceway cover. $13 upcharge (list) for Metallic trim color. 4) Trim color for top cap. $13 upcharge (list) for Metallic trim color.

April 2008 / USA

Class AC – SIN 711-1; Discount Group I Canadian Conversion Factor: Refertohaworth.com/Canada

UniGroup Too Price List

Panel Accessories – Retrofit Kits for use with PLACES Panels

180° Full-Height Finish Post — Square Painted Top Cap

Actual Height

Number

30′′(762mm) 37′′(940mm) 44′′(1118mm) 50′′(1270mm) 56′′(1422mm) 64′′(1626mm) 68′′(1727mm) 82′′(2083mm)

H2 H2 H2 H2 H2 H2 H2 H2

1 S-30 S-37 S-44 S-50 S-56 S-64 S-68 S-82

Painted Price

Fabric Price

$ 75 82 86 91 95 97 102 110

$ 78 85 88 93 98 101 105 113

Feature

To Order, Specify:

• Includes 180° vertical cover, top cap and base raceway cover.

1) Product number, including:

1 Surface Finish: Specification Tips

H2FS H2PS

• For use with equal height PLACES panels in a 180°, 3-Way condition with UniGroup Too square painted top cap. • Not for use with legacy expanded panels. • To be used with straight top cap panels only. • Required by UL for covering base raceway power connectors when power connector covers are not used.

P

Painted

F

Fabric

2) Paint or fabric color for finish post. $13 upcharge (list) for Metallic trim color. 3) Trim color for raceway cover. $13 upcharge (list) for Metallic trim color. 4) Trim color for top cap. $13 upcharge (list) for Metallic trim color.

Class AC – SIN 711-1; Discount Group I Canadian Conversion Factor: Refertohaworth.com/Canada

April 2008 / USA

47

UniGroup Too Price List

Panel Accessories – Retrofit Kits for use with PLACES Panels Actual Height

Number 1

180° Variable-Height Finish 30′′(762mm) Post — Square Painted Top Cap

H2 H2 H2 H2 H2 H2 H2 H2 H2 H2 H2 H2 H2 H2 H2 H2 H2 H2 H2 H2 H2 H2

37′′(940mm)

44′′(1118mm)

50′′(1270mm)

56′′(1422mm)

64′′(1626mm) H2FS-V H2PS-V

68′′(1727mm)

82′′(2083mm)

-V1

-V2I

-V2L

S-30-V1 S-30-V2I S-30-V2L S-37-V1 S-37-V2I S-37-V2L S-44-V1 S-44-V2I S-44-V2L S-50-V1 S-50-V2I S-50-V2L S-56-V1 S-56-V2I S-56-V2L S-64-V1 S-64-V2I S-64-V2L S-68-V1 S-68-V2I S-68-V2L S-82-V2I

$ 87 87 87 $ 94 94 94 $ 98 98 98 $103 103 103 $107 107 107 $109 109 109 $114 114 114 $122

$ 90 90 90 $ 97 97 97 $100 100 100 $105 105 105 $110 110 110 $113 113 113 $117 117 117 $125

To Order, Specify:

• Includes 180° vertical cover, square painted top cap and base raceway cover. • Includes top cap with one or two alignment tabs; specify accordingly.

1) Product number, including:

• For use with multiple height PLACES panels in a 180°, 3-Way condition with UniGroup Too square painted top cap; specify height to match lowest panel height except in V2I condition. • Not for use with legacy expanded panels. • To be used with straight top cap panels only. • Product specification must reflect number of top cap alignment tabs for lowest like panel heights in an ‘‘I’’ or ‘‘L’’ condition; refer to UniGroup Too Application Guidelines. • Top cap alignment tabs are for dedicated applications and are not field removable; -V1, -V2I, -V2L. • Required by UL for covering base raceway power connectors when power connector covers are not used.

April 2008 / USA

Fabric Price

Features

Specification Tips

48

Painted Price

Class AC – SIN 711-1; Discount Group I Canadian Conversion Factor: Refertohaworth.com/Canada

1 Surface Finish: P

Painted

F

Fabric

2) Paint or fabric color for finish post. $13 upcharge (list) for Metallic trim color. 3) Trim color for raceway cover. $13 upcharge (list) for Metallic trim color. 4) Trim color for top cap. $13 upcharge (list) for Metallic trim color.

UniGroup Too Price List

This page intentionally blank

April 2008 / USA

49

UniGroup Too Price List

Monolithic Panel with Radius Wood Top Cap UniGroup

Fabric

FNW-B (Non Powered)

FPW-B (3-Circuit Powered) FPW-6 (6-Circuit Powered)

Features

Specification Tips

• Includes non-powered or powered panel assembly radius wood top cap with aligner, with or without one-piece base raceway cover, 1.6 hinge kits, side trim rails, leveling glides and carpet gripper; power distribution assembly/flex connector(s) when power is specified..6 base raceway end caps are shipped with each panel.Order additional as necessary. • Acoustical panel surfaces. • Panel surfaces may have the same fabric on both sides or a different fabric on each side. • Panel thickness is 2′′(51mm). • Base raceway is 4′′(102mm) high. • Powered raceway with or without raceway cover requires modified catalog number and list price. • Powered panels are available for countries that utilize 120 volt 60 hertz electrical systems and U.S. configured plugs and outlets. • Shipped with unassembled top cap, base raceway cover and side trim rails.

• Wood top cap panels require finish posts, including end-of-run conditions and variable height conditions. • For mixed fabric surfaces, price at higher fabric grade. • Panels will accept add-on panels up to a combined height of 82′′(2083mm). For aesthetic consistency, specify UniGroup add-on panels. • Flex connectors provided for powered monolithic panels accommodate straight in-line, inside 90°, and inside 120° conditions (if applicable). • Receptacles for powered panels must be specified separately. • Raceway cover must be separately specified for option -E (no raceway cover).

To Order, Specify: 1) Product number. 2) Fabric/colorway for panel side one. 3) Fabric/colorway for panel side two.

C

R

US

4) Trim color for raceway cover, glide housings, end caps and side trim rails.

NOTE:

5) Wood finish color for top cap.

This panel has fabric/colorway restrictions, see systems fabrics/ color legend.

Non-Powered Panel with Base Raceway Cover, see opposite page. The following options require modification of the 3-Circuit Non-Powered (Example: FNW-462-B) product numbers and list prices shown on opposite page:

Panel Width

Non-Powered without Base Raceway Cover (Example: FNW-462-BE)

3-Circuit Powered (Example: FPW-462-B)

6-Circuit Powered (Example: FPW-462-6)

or

or

NYC 3-Circuit Powered (Example: FPW-462-BY)

3-Circuit Powered without Base Raceway Cover (Example: FPW-462-BE)

6-Circuit Powered without Base Raceway Cover (Example: FPW-462-6E)

or

or

NYC 6-Circuit Powered (Example: FPW-462-6Y)

NYC 3-Circuit Powered without Base Raceway Cover (Example: FPW-462-BYE)

NYC 6-Circuit Powered without Base Raceway Cover (Example: FPW-462-6YE)

Add:

Deduct:

Add:

Add:

Add:

12′′(305mm)

-$26

$155*

n/a

n/a

n/a

18′′(457mm)

-36

155

n/a

$107

n/a

24′′(610mm)

-44

155

$276

99

$220

30′′(762mm)

-46

155

276

96

217

36′′(914mm)

-50

155

276

87

208

42′′(1067mm)

-57

155

276

81

202

48′′(1219mm)

-60

155

276

75

196

54′′(1372mm)

-63

155

276

69

190

60′′(1524mm)

-69

155

276

63

184

*The 12 ′′-wide panel has a pass-through connector and a non-powered raceway cover.

NOTES: • Powered panels with raceway covers ship with receptacle ports in the base raceway cover. Receptacle ports on the raceway cover measure 2.35 ′′(60mm) top-to-bottom and 2.88 ′′(73mm) side-to-side. • Non-powered panels ship without receptacle ports in the base raceway cover. • Powered panels with Power Distribution Assemblies (PDA) but without raceway covers require separately specified base raceway covers for power and communication port locations other than the standard powered base raceway cover. • New York City (NYC) electrical applications require field installation of PDA. • New York Port Authority (NYPA) electrical applications require metal raceway covers. To order, specify NYC powered panels without raceway cover and separately specify metal covers through Haworth e-Parts. • Some building codes may restrict the use of panel heights greater than 69 ′′(1753mm). Consult your local code authority to assure that the furniture layout is compliant. • For International Power, specify non-powered panels and use Power Logic components. See Specification Guide for more information on Power Logic. • For Chicago power, specify non-powered panels without a base raceway cover and separately specify Chicago power retrofit kit.

50

April 2008 / USA

Class AA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

UniGroup Too Price List

Monolithic Panel with Radius Wood Top Cap UniGroup Actual Height Fabric

30′′(762mm)

37′′(940mm)

44′′(1118mm)

50′′(1270mm)

64′′(1626mm)

68′′(1727mm)

82′′(2083mm)

Width

Non-Powered Number

Fabric Grade A B

C

D

E

F

G

12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm)

FNW-128- B FNW-1828- B FNW-228- B FNW-3028- B FNW-328- B FNW-4228- B FNW-428- B FNW-5428- B FNW-528- B FNW-135- B FNW-1835- B FNW-235- B FNW-3035- B FNW-335- B FNW-4235- B FNW-435- B FNW-5435- B FNW-535- B FNW-142- B FNW-1842- B FNW-242- B FNW-3042- B FNW-342- B FNW-4242- B FNW-442- B FNW-5442- B FNW-542- B FNW-148- B FNW-1848- B FNW-248- B FNW-3048- B FNW-348- B FNW-4248- B FNW-448- B FNW-5448- B FNW-548- B FNW-162- B FNW-1862- B FNW-262- B FNW-3062- B FNW-362- B FNW-4262- B FNW-462- B FNW-5462- B FNW-562- B FNW-166- B FNW-1866- B FNW-266- B FNW-3066- B FNW-366- B FNW-4266- B FNW-466- B FNW-5466- B FNW-566- B FNW-180- B FNW-1880- B FNW-280- B FNW-3080- B FNW-380- B FNW-4280- B FNW-480- B FNW-5480- B FNW-580- B

$ 492 546 595 687 725 801 847 906 965 $ 513 572 629 721 764 839 895 952 1010 $ 538 603 649 721 770 843 898 953 1010 $ 558 633 678 754 803 881 936 1005 1073 $ 595 656 696 792 869 945 998 1083 1167 $ 633 701 748 847 930 1011 1064 1153 1242 $ 721 878 940 1065 1177 1278 1348 1429 1508

$ 584 638 687 779 843 919 965 1024 1083 $ 605 664 721 813 882 957 1013 1070 1128 $ 630 695 741 813 888 961 1016 1071 1128 $ 650 725 770 846 921 999 1054 1123 1191 $ 695 756 796 892 995 1071 1124 1209 1293 $ 733 801 848 947 1056 1137 1190 1279 1368 $ 821 978 1040 1165 1303 1404 1474 1555 1634

$ 628 682 731 823 895 971 1017 1076 1135 $ 649 708 765 857 934 1009 1065 1122 1180 $ 674 739 785 857 940 1013 1068 1123 1180 $ 694 769 814 890 973 1051 1106 1175 1243 $ 745 806 846 942 1069 1145 1198 1283 1367 $ 783 851 898 997 1130 1211 1264 1353 1442 $ 871 1028 1090 1215 1377 1478 1548 1629 1708

$ 640 694 743 835 905 981 1027 1086 1145 $ 661 720 777 869 944 1019 1075 1132 1190 $ 686 751 797 869 950 1023 1078 1133 1190 $ 706 781 826 902 993 1071 1126 1195 1263 $ 757 818 858 954 1115 1191 1244 1329 1413 $ 795 863 910 1009 1188 1269 1322 1411 1500 $ 883 1040 1098 1223 1489 1590 1660 1741 1820

$ 652 706 755 847 917 993 1039 1098 1157 $ 673 732 789 881 956 1031 1087 1144 1202 $ 698 763 809 881 988 1061 1116 1171 1228 $ 718 793 838 914 1053 1131 1186 1255 1323 $ 767 828 868 964 1187 1263 1316 1401 1485 $ 805 873 920 1019 1268 1349 1402 1491 1580 $ 893 1050 1146 1271 1585 1686 1756 1837 1916

$ 662 716 765 857 929 1005 1051 1110 1169 $ 683 742 799 891 968 1043 1099 1156 1214 $ 708 773 819 891 1040 1113 1168 1223 1280 $ 728 803 848 924 1113 1191 1246 1315 1383 $ 777 838 896 992 1265 1341 1394 1479 1563 $ 815 883 958 1057 1352 1433 1486 1575 1664 $ 903 1060 1194 1319 1687 1788 1858 1939 2018

$ 528 582 631 723 773 849 895 954 1013 $ 549 608 665 757 812 887 943 1000 1058 $ 574 639 685 757 818 891 946 1001 1058 $ 594 669 714 790 851 929 984 1053 1121 $ 635 696 736 832 921 997 1050 1135 1219 $ 673 741 788 887 982 1063 1116 1205 1294 $ 761 918 980 1105 1229 1330 1400 1481 1560

Class AA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

51

UniGroup Too Price List

Glazed Monolithic Panel with Radius Wood Top Cap UniGroup

Glazed

Features

Specification Tips

• Includes non-powered or powered panel assembly, radius wood top cap with aligner, with or without one-piece base raceway cover, 1.6 hinge kits, side trim rails, leveling glides and carpet gripper; power distribution assembly/flex connector(s) when power is specified. .6 base raceway end caps are shipped with each panel.Order additional as necessary. • Panel thickness is 2′′(51mm). • Base raceway is 4′′(102mm) high. • Powered raceway with or without raceway cover requires modified catalog number and list price. • Powered panels are available for countries that utilize 120 volt 60 hertz electrical systems and U.S. configured plugs and outlets. • Does not accept top feed modules. • Shipped with unassembled top cap, base raceway cover and side trim rails.

• Wood top cap panels require finish posts, including end-of-run conditions and variable height conditions. • Panels will accept glazed add-on panels up to a combined height of 82″(2083mm). For aesthetic consistency, specify UniGroup add-on panels. • Flex connectors provided for powered monolithic panels accommodate straight in-line, inside 90°, and inside 120° conditions (if applicable). • Receptacles for powered panels must be specified separately. • Raceway cover must be separately specified for option -E (no raceway cover).

To Order, Specify: 1) Product number. 2) Glazing finish color.

GNW-B (Non Powered)

C

R

GPW-B (3-Circuit Powered) GPW-6 (6-Circuit Powered)

3) Trim color for frame, raceway cover, glide housing, end caps and side trim rails. 4) Wood finish color for top cap.

US

Non-Powered Panel with Base Raceway Cover, see opposite page. The following options require modification of the 3-Circuit Non-Powered (Example: GNW-462-B) product numbers and list prices shown on opposite page:

Panel Width

Non-Powered without Base Raceway Cover (Example: GNW-462-BE)

3-Circuit Powered (Example: GPW-462-B)

6-Circuit Powered (Example: GPW-462-6)

or

or

NYC 3-Circuit Powered (Example: GPW-462-BY)

3-Circuit Powered without Base Raceway Cover (Example: GPW-462-BE)

6-Circuit Powered without Base Raceway Cover (Example: GPW-462-6E)

or

or

NYC 6-Circuit Powered (Example: GPW-462-6Y)

NYC 3-Circuit Powered without Base Raceway Cover (Example: GPW-462-BYE)

NYC 6-Circuit Powered without Base Raceway Cover (Example: GPW-462-6YE)

Add:

Deduct:

Add:

Add:

Add:

12′′(305mm)

-$26

$155*

n/a

n/a

n/a

24′′(610mm)

-44

155

$276

$99

$220

36′′(914mm)

-50

155

276

87

208

42′′(1067mm)

-57

155

276

81

202

48′′(1219mm)

-60

155

276

75

196

60′′(1524mm)

-69

155

276

63

184

*The 12 ′′-wide panel has a pass-through connector and a non-powered raceway cover.

NOTES: • Powered panels with raceway covers ship with receptacle ports in the base raceway cover. Receptacle ports on the raceway cover measure 2.35 ′′(60mm) top-to-bottom and 2.88 ′′(73mm) side-to-side. • Non-powered panels ship without receptacle ports in the base raceway cover. • Powered panels with Power Distribution Assemblies (PDA) but without raceway covers require separately specified base raceway covers for power and communication port locations other than the standard powered base raceway cover. • New York City (NYC) electrical applications require field installation of PDA. • New York Port Authority (NYPA) electrical applications require metal raceway covers. To order, specify NYC powered panels without raceway cover and separately specify metal covers through Haworth e-Parts. • Some building codes may restrict the use of panel heights greater than 69 ′′(1753mm). Consult your local code authority to assure that the furniture layout is compliant. • For International Power, specify non-powered panels and use Power Logic components. See Specification Guide for more information on Power Logic. • For Chicago power, specify non-powered panels without a base raceway cover and separately specify Chicago power retrofit kit.

52

April 2008 / USA

Class AA – GSA: Open Market Canadian Conversion Factor: Refer to haworth.com/Canada

UniGroup Too Price List

Glazed Monolithic Panel with Radius Wood Top Cap UniGroup Actual Height Glazed

64′′(1626mm)

68′′(1727mm)

82′′(2083mm)

Width

Non-Powered Number

Clear or Bronze Price

Frosted Price

12′′(305mm) 24′′(610mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 60′′(1524mm) 12′′(305mm) 24′′(610mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 60′′(1524mm) 12′′(305mm) 24′′(610mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 60′′(1524mm)

GNW-162- B GNW-262- B GNW-362- B GNW-4262- B GNW-462- B GNW-562- B GNW-166- B GNW-266- B GNW-366- B GNW-4266- B GNW-466- B GNW-566- B GNW-180- B GNW-280- B GNW-380- B GNW-4280- B GNW-480- B GNW-580- B

$ 905 1147 1402 1571 1691 1959 $ 963 1219 1485 1676 1803 2088 $1097 1464 1772 1993 2142 2455

$1091 1333 1689 1858 1978 2246 $1149 1405 1772 1963 2090 2375 $1283 1650 2059 2280 2429 2742

Product marked with this symbol available as GSA open market.

Class AA – GSA: Open Market Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

53

UniGroup Too Price List

Monolithic Panel with Radius Steel Top Cap UniGroup

Fabric

EFN-B (Non Powered)

EFP-B (3-Circuit Powered) EFP-6 (6-Circuit Powered)

Features

Specification Tips

• Includes non-powered or powered panel assembly, radius steel top cap, with or without one-piece base raceway cover, 1.6 hinge kits, side trim rails, leveling glides and carpet gripper; power distribution assembly/flex connector(s) when power is specified. .6 base raceway end caps are shipped with each panel. Order additional as necessary. • Acoustical panel surfaces. • Panel surfaces may have the same fabric on both sides or a different fabric on each side. • Panel thickness is 2′′(51mm). • Base raceway is 4′′(102mm) high. • Powered raceway with or without raceway cover requires modified catalog number and list price. • Powered panels are available for countries that utilize 120 volt 60 hertz electrical systems and U.S. configured plugs and outlets. • Shipped with unassembled top cap, base raceway cover and side trim rails.

• For mixed fabric surfaces, price at higher fabric grade. • Panels will accept add-on panels up to a combined height of 82″(2083mm). For aesthetic consistency, specify UniGroup add-on panels. • Flex connectors provided for powered monolithic panels accommodate straight in-line, inside 90°, and inside 120° conditions (if applicable). • Receptacles for powered panels must be specified separately. • Raceway cover must be separately specified for option -E (no raceway cover). • Additional base raceway cover end caps will need to be specified if finish posts are not ordered.

To Order, Specify: 1) Product number. 2) Fabric/colorway for panel side one. 3) Fabric/colorway for panel side two.

C

R

US

4) Trim color for raceway cover, glide housings and end caps.

NOTE:

5) Trim color for top cap and side trim rails.

This panel has fabric/colorway restrictions, see Systems Fabric/ Color Legend.

Non-Powered Panel with Base Raceway Cover, see opposite page. The following options require modification of the 3-Circuit Non-Powered (Example: EFN-462-B) product numbers and list prices shown on opposite page:

Panel Width

Non-Powered without Base Raceway Cover (Example: EFN-462-BE)

3-Circuit Powered (Example: EFP-462-B)

6-Circuit Powered (Example: EFP-462-6)

or

or

NYC 3-Circuit Powered (Example: EFP-462-BY)

3-Circuit Powered without Base Raceway Cover (Example: EFP-462-BE)

6-Circuit Powered without Base Raceway Cover (Example: EFP-462-6E)

or

or

NYC 6-Circuit Powered (Example: EFP-462-6Y)

NYC 3-Circuit Powered without Base Raceway Cover (Example: EFP-462-BYE)

NYC 6-Circuit Powered without Base Raceway Cover (Example: EFP-462-6YE)

Add:

Add:

Deduct:

Add:

Add:

12′′(305mm)

-$26

$155*

n/a

n/a

n/a

18′′(457mm)

-36

155

n/a

$107

n/a

24′′(610mm)

-44

155

$276

99

$220

30′′(762mm)

-46

155

276

96

217

36′′(914mm)

-50

155

276

87

208

42′′(1067mm)

-57

155

276

81

202

48′′(1219mm)

-60

155

276

75

196

54′′(1372mm)

-63

155

276

69

190

60′′(1524mm)

-69

155

276

63

184

*The 12 ′′-wide panel has a pass-through connector and a non-powered raceway cover.

NOTES: • Powered panels with raceway covers ship with receptacle ports in the base raceway cover. Receptacle ports on the raceway cover measure 2.35 ′′(60mm) top-to-bottom and 2.88 ′′(73mm) side-to-side. • Non-powered panels ship without receptacle ports in the base raceway cover. • Powered panels with Power Distribution Assemblies (PDA) but without raceway covers require separately specified base raceway covers for power and communication port locations other than the standard powered base raceway cover. • New York City (NYC) electrical applications require field installation of PDA. • New York Port Authority (NYPA) electrical applications require metal raceway covers. To order, specify NYC powered panels without raceway cover and separately specify metal covers through Haworth e-Parts. • Some building codes may restrict the use of panel heights greater than 69 ′′(1753mm). Consult your local code authority to assure that the furniture layout is compliant. • For International Power, specify non-powered panels and use Power Logic components. See Specification Guide for more information on Power Logic. • For Chicago power, specify non-powered panels without a base raceway cover and separately specify Chicago power retrofit kit.

54

April 2008 / USA

Class AA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

UniGroup Too Price List

Monolithic Panel with Radius Steel Top Cap UniGroup Actual Height Fabric

30′′(762mm)

37′′(940mm)

44′′(1118mm)

50′′(1270mm)

56′′(1422mm)

64′′(1626mm)

68′′(1727mm)

82′′(2083mm)

Width

Non-Powered Number

Fabric Grade A B

C

D

E

F

G

12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm)

EFN-128- B EFN-1828- B EFN-228- B EFN-3028- B EFN-328- B EFN-4228- B EFN-428- B EFN-5428- B EFN-528- B EFN-135- B EFN-1835- B EFN-235- B EFN-3035- B EFN-335- B EFN-4235- B EFN-435- B EFN-5435- B EFN-535- B EFN-142- B EFN-1842- B EFN-242- B EFN-3042- B EFN-342- B EFN-4242- B EFN-442- B EFN-5442- B EFN-542- B EFN-148- B EFN-1848- B EFN-248- B EFN-3048- B EFN-348- B EFN-4248- B EFN-448- B EFN-5448- B EFN-548- B EFN-154- B EFN-1854- B EFN-254- B EFN-3054- B EFN-354- B EFN-4254- B EFN-454- B EFN-5454- B EFN-554- B EFN-162- B EFN-1862- B EFN-262- B EFN-3062- B EFN-362- B EFN-4262- B EFN-462- B EFN-5462- B EFN-562- B EFN-166- B EFN-1866- B EFN-266- B EFN-3066- B EFN-366- B EFN-4266- B EFN-466- B EFN-5466- B EFN-566- B EFN-180- B EFN-1880- B EFN-280- B EFN-3080- B EFN-380- B EFN-4280- B EFN-480- B EFN-5480- B EFN-580- B

$ 476 523 566 652 681 751 790 843 900 $ 500 550 596 686 719 785 831 885 942 $ 522 583 620 686 725 790 834 887 942 $ 539 610 646 717 756 827 873 939 1004 $ 564 635 667 757 812 881 929 1000 1068 $ 580 647 684 778 825 889 933 1015 1096 $ 615 680 717 812 884 957 999 1085 1173 $ 704 854 907 1028 1131 1225 1285 1362 1437

$ 568 615 658 744 799 869 908 961 1018 $ 592 642 688 778 837 903 949 1003 1060 $ 614 675 712 778 843 908 952 1005 1060 $ 631 702 738 809 874 945 991 1057 1122 $ 656 727 759 849 930 999 1047 1118 1186 $ 680 747 784 878 951 1015 1059 1141 1222 $ 715 780 817 912 1010 1083 1125 1211 1299 $ 804 954 1007 1128 1257 1351 1411 1488 1563

$ 612 659 702 788 851 921 960 1013 1070 $ 636 686 732 822 889 955 1001 1055 1112 $ 658 719 756 822 895 960 1004 1057 1112 $ 675 746 782 853 926 997 1043 1109 1174 $ 700 771 803 893 982 1051 1099 1170 1238 $ 730 797 834 928 1025 1089 1133 1215 1296 $ 765 830 867 962 1084 1157 1199 1285 1373 $ 854 1004 1057 1178 1331 1425 1485 1562 1637

$ 624 671 714 800 861 931 970 1023 1080 $ 648 698 744 834 899 965 1011 1065 1122 $ 670 731 768 834 917 982 1026 1079 1134 $ 687 758 794 865 946 1017 1065 1129 1194 $ 714 785 817 907 1026 1095 1143 1214 1282 $ 742 809 846 940 1071 1135 1179 1261 1342 $ 777 842 879 974 1142 1215 1257 1343 1431 $ 866 1016 1065 1186 1443 1537 1597 1674 1749

$ 636 683 726 812 873 943 982 1035 1092 $ 660 710 756 846 911 977 1023 1077 1134 $ 682 743 780 846 943 1008 1052 1105 1160 $ 699 770 806 877 1006 1077 1091 1189 1254 $ 726 797 829 919 1092 1161 1209 1280 1348 $ 752 819 866 960 1143 1207 1251 1333 1414 $ 787 852 899 994 1222 1295 1337 1423 1511 $ 876 1026 1113 1234 1539 1633 1693 1770 1845

$ 646 693 736 822 885 955 994 1047 1104 $ 670 720 766 856 923 989 1035 1089 1146 $ 692 753 790 856 995 1060 1104 1157 1212 $ 709 780 816 887 1066 1137 1143 1249 1314 $ 738 809 841 931 1160 1229 1277 1348 1416 $ 762 829 884 978 1221 1285 1329 1411 1492 $ 797 862 927 1022 1306 1379 1421 1507 1595 $ 886 1036 1161 1282 1641 1735 1795 1872 1947

$ 512 559 602 688 729 799 838 891 948 $ 536 586 632 722 767 833 879 933 990 $ 558 619 656 722 773 838 882 935 990 $ 575 646 682 753 804 875 921 987 1052 $ 600 671 703 793 860 929 977 1048 1116 $ 620 687 724 818 877 941 985 1067 1148 $ 655 720 757 852 936 1009 1051 1137 1225 $ 744 894 947 1068 1183 1277 1337 1414 1489

Class AA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

55

UniGroup Too Price List

Basic Monolithic Panel with Radius Steel Top Cap UniGroup

Fabric

EMN-B (Non Powered)

EMP-B (3-Circuit Powered) EMP-6 (6-Circuit Powered)

Features

Specification Tips

• Includes non-powered or powered panel assembly, radius steel top cap, with or without one-piece base raceway cover, 1.6 hinge kits, side trim rails, leveling glides and carpet gripper; power distribution assembly/flex connector(s) when power is specified. .6 base raceway end caps are shipped with each panel. Order additional as necessary. • Acoustical panel surfaces. • Panel surfaces may have the same fabric on both sides or a different fabric on each side. • Panel thickness is 2′′(51mm). • Base raceway is 4′′(102mm) high. • Powered raceway with or without raceway cover requires modified catalog number and list price. • Powered panels are available for countries that utilize 120 volt 60 hertz electrical systems and U.S. configured plugs and outlets. • Shipped with unassembled top cap, base raceway cover and side trim rails.

• For mixed fabric surfaces, price at higher fabric grade. • Panels will accept add-on panels up to a combined height of 82″(2083mm). For aesthetic consistency, specify UniGroup add-on panels. • Flex connectors provided for powered monolithic panels accommodate straight in-line, inside 90°, and inside 120° conditions (if applicable). • Receptacles for powered panels must be specified separately. • Raceway cover must be separately specified for option -E (no raceway cover). • Additional base raceway cover end caps will need to be specified if finish posts are not ordered.

To Order, Specify: 1) Product number. 2) Fabric/colorway for panel side one. 3) Fabric/colorway for panel side two.

C

R

US

4) Trim color for raceway cover, glide housings and end caps.

NOTE:

5) Trim color for top cap and side trim rails.

This panel has fabric/colorway restrictions, see Systems Fabric/ Color Legend.

Non-Powered Panel with Base Raceway Cover, see opposite page. The following options require modification of the 3-Circuit Non-Powered (Example: EMN-462-B) product numbers and list prices shown on opposite page:

Panel Width

Non-Powered without Base Raceway Cover (Example: EMN-462-BE)

3-Circuit Powered (Example: EMP-462-B)

6-Circuit Powered (Example: EMP-462-6)

or

or

NYC 3-Circuit Powered (Example: EMP-462-BY)

3-Circuit Powered without Base Raceway Cover (Example: EMP-462-BE)

6-Circuit Powered without Base Raceway Cover (Example: EMP-462-6E)

or

or

NYC 6-Circuit Powered (Example: EMP-462-6Y)

NYC 3-Circuit Powered without Base Raceway Cover (Example: EMP-462-BYE)

NYC 6-Circuit Powered without Base Raceway Cover (Example: EMP-462-6YE)

Add:

Add:

Deduct:

Add:

Add:

12′′(305mm)

-$26

$155*

n/a

n/a

n/a

18′′(457mm)

-36

155

n/a

$107

n/a

24′′(610mm)

-44

155

$276

99

$220

30′′(762mm)

-46

155

276

96

217

36′′(914mm)

-50

155

276

87

208

42′′(1067mm)

-57

155

276

81

202

48′′(1219mm)

-60

155

276

75

196

54′′(1372mm)

-63

155

276

69

190

60′′(1524mm)

-69

155

276

63

184

*The 12 ′′-wide panel has a pass-through connector and a non-powered raceway cover.

NOTES: • Powered panels with raceway covers ship with receptacle ports in the base raceway cover. Receptacle ports on the raceway cover measure 2.35 ′′(60mm) top-to-bottom and 2.88 ′′(73mm) side-to-side. • Non-powered panels ship without receptacle ports in the base raceway cover. • Powered panels with Power Distribution Assemblies (PDA) but without raceway covers require separately specified base raceway covers for power and communication port locations other than the standard powered base raceway cover. • New York City (NYC) electrical applications require field installation of PDA. • New York Port Authority (NYPA) electrical applications require metal raceway covers. To order, specify NYC powered panels without raceway cover and separately specify metal covers through Haworth e-Parts. • Some building codes may restrict the use of panel heights greater than 69 ′′(1753mm). Consult your local code authority to assure that the furniture layout is compliant. • For International Power, specify non-powered panels and use Power Logic components. See Specification Guide for more information on Power Logic. • For Chicago power, specify non-powered panels without a base raceway cover and separately specify Chicago power retrofit kit.

56

April 2008 / USA

Class AA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

UniGroup Too Price List

Basic Monolithic Panel with Radius Steel Top Cap UniGroup Actual Height Fabric

30′′(762mm)

37′′(940mm)

44′′(1118mm)

50′′(1270mm)

56′′(1422mm)

64′′(1626mm)

68′′(1727mm)

82′′(2083mm)

Width

Non-Powered Number

Fabric Grade A B

C

D

E

F

G

12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm)

EMN-128- B EMN-1828- B EMN-228- B EMN-3028- B EMN-328- B EMN-4228- B EMN-428- B EMN-5428- B EMN-528- B EMN-135- B EMN-1835- B EMN-235- B EMN-3035- B EMN-335- B EMN-4235- B EMN-435- B EMN-5435- B EMN-535- B EMN-142- B EMN-1842- B EMN-242- B EMN-3042- B EMN-342- B EMN-4242- B EMN-442- B EMN-5442- B EMN-542- B EMN-148- B EMN-1848- B EMN-248- B EMN-3048- B EMN-348- B EMN-4248- B EMN-448- B EMN-5448- B EMN-548- B EMN-154- B EMN-1854- B EMN-254- B EMN-3054- B EMN-354- B EMN-4254- B EMN-454- B EMN-5454- B EMN-554- B EMN-162- B EMN-1862- B EMN-262- B EMN-3062- B EMN-362- B EMN-4262- B EMN-462- B EMN-5462- B EMN-562- B EMN-166- B EMN-1866- B EMN-266- B EMN-3066- B EMN-366- B EMN-4266- B EMN-466- B EMN-5466- B EMN-566- B EMN-180- B EMN-1880- B EMN-280- B EMN-3080- B EMN-380- B EMN-4280- B EMN-480- B EMN-5480- B EMN-580- B

$ 408 453 487 565 588 647 681 731 778 $ 431 476 557 594 622 678 719 767 815 $ 455 505 538 594 627 685 721 768 815 $ 467 528 560 621 655 715 755 813 872 $ 490 561 592 675 702 763 806 864 924 $ 502 551 581 654 714 771 809 879 948 $ 533 589 623 701 765 830 865 941 1015 $ 610 741 789 895 979 1061 1115 1182 1250

$ 500 545 579 657 706 765 799 849 896 $ 523 568 649 686 740 796 837 885 933 $ 547 597 630 686 745 803 839 886 933 $ 563 624 656 717 777 837 877 935 994 $ 582 653 684 767 820 881 924 982 1042 $ 602 651 681 754 840 897 935 1005 1074 $ 633 689 723 801 891 956 991 1067 1141 $ 710 841 889 995 1105 1187 1241 1308 1376

$ 544 589 623 701 758 817 851 901 948 $ 567 612 693 730 792 848 889 937 985 $ 591 641 674 730 797 855 891 938 985 $ 611 672 704 765 825 885 925 983 1042 $ 626 697 728 811 872 933 976 1034 1094 $ 652 701 731 804 914 971 1009 1079 1148 $ 683 739 773 851 965 1030 1065 1141 1215 $ 760 891 939 1045 1179 1261 1315 1382 1450

$ 556 601 635 713 768 827 861 911 958 $ 579 624 705 742 802 858 899 947 995 $ 603 653 686 742 819 877 913 960 1007 $ 615 676 708 769 845 905 945 1003 1062 $ 640 711 742 825 914 975 1018 1076 1136 $ 664 713 743 816 958 1015 1053 1123 1192 $ 695 751 785 863 1023 1088 1123 1199 1273 $ 772 903 945 1051 1291 1061 1427 1494 1562

$ 568 613 647 725 780 839 873 923 970 $ 591 636 717 754 814 870 911 959 1007 $ 615 665 698 754 845 903 939 986 1033 $ 627 688 720 781 903 963 1003 1061 1120 $ 652 723 754 837 982 1043 1086 1144 1204 $ 674 723 763 836 1032 1089 1127 1197 1266 $ 705 761 805 883 1103 1168 1203 1279 1353 $ 782 913 993 1099 1387 1061 1523 1590 1658

$ 578 623 657 735 792 851 885 935 982 $ 601 646 727 764 826 882 923 971 1019 $ 625 675 708 764 897 955 991 1038 1085 $ 637 698 730 791 965 1025 1065 1123 1182 $ 664 735 766 849 1048 1109 1152 1210 1270 $ 684 733 781 854 1110 1167 1205 1275 1344 $ 715 771 833 911 1187 1252 1287 1363 1437 $ 792 923 1043 1149 1487 1061 1623 1690 1758

$ 444 489 523 601 636 695 729 779 826 $ 467 512 593 630 670 726 767 815 863 $ 491 541 574 630 675 733 769 816 863 $ 503 564 596 657 703 763 803 861 920 $ 526 597 628 711 750 811 854 912 972 $ 542 591 621 694 766 823 861 931 1000 $ 573 629 663 741 817 882 917 993 1067 $ 650 781 829 935 1031 1113 1167 1234 1302

Class AA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

57

UniGroup Too Price List

Laminate Monolithic Panel with Radius Steel Top Cap UniGroup

Laminate

EDN-B (Non Powered)

C

R

Features

Specification Tips

• Includes non-powered or powered panel assembly, radius steel top cap, with or without one-piece base raceway cover, 1.6 hinge kits, side trim rails, leveling glides and carpet gripper; power distribution assembly/flex connector(s) when power is specified. .6 base raceway end caps are shipped with each panel. Order additional as necessary. • Panel surfaces may have same laminate on both sides or a different laminate on each side. • Panel thickness is 2′′(51mm). • Base raceway is 4′′(102mm) high. • Powered raceway with or without raceway cover requires modified catalog number and list price. • Powered panels are available for countries that utilize 120 volt 60 hertz electrical systems and U.S. configured plugs and outlets. • Shipped with unassembled top cap, base raceway cover and side trim rails.

• Panels will accept add-on panels up to a combined height of 82′′(2083mm). For aesthetic consistency, specify UniGroup add-on panels. • Flex connectors provided for powered monolithic panels accommodate straight in-line, inside 90°, and inside 120° conditions (if applicable). • Receptacles for powered panels must be specified separately. • Raceway cover must be separately specified for option -E (no raceway cover). • Additional base raceway cover end caps will need to be specified if finish posts are not ordered.

EDP-B (3-Circuit Powered) EDP-6 (6-Circuit Powered)

To Order, Specify: 1) Product number. 2) Laminate surface color for panel side one. 3) Laminate surface color for panel side two. 4) Trim color for raceway cover, glide housings and end caps.

US

5) Trim color for top cap and side trim rails.

Non-Powered Panel with Base Raceway Cover, see opposite page. The following options require modification of the 3-Circuit Non-Powered (Example: EDN-462-B) product numbers and list prices shown on opposite page:

Panel Width

Non-Powered without Base Raceway Cover (Example: EDN-462-BE)

3-Circuit Powered (Example: EDP-462-B)

6-Circuit Powered (Example: EDP-462-6)

or

or

NYC 3-Circuit Powered (Example: EDP-462-BY)

3-Circuit Powered without Base Raceway Cover (Example: EDP-462-BE)

6-Circuit Powered without Base Raceway Cover (Example: EDP-462-6E)

or

or

NYC 6-Circuit Powered (Example: EDP-462-6Y)

NYC 3-Circuit Powered without Base Raceway Cover (Example: EDP-462-BYE)

NYC 6-Circuit Powered without Base Raceway Cover (Example: EDP-462-6YE)

Add:

Add:

Deduct:

Add:

Add:

12′′(305mm)

-$26

$155*

n/a

n/a

n/a

18′′(457mm)

-36

155

n/a

$107

n/a

24′′(610mm)

-44

155

$276

99

$220

30′′(762mm)

-46

155

276

96

217

36′′(914mm)

-50

155

276

87

208

42′′(1067mm)

-57

155

276

81

202

48′′(1219mm)

-60

155

276

75

196

60′′(1524mm)

-69

155

276

63

184

*The 12 ′′-wide panel has a pass-through connector and a non-powered raceway cover.

NOTES: • Powered panels with raceway covers ship with receptacle ports in the base raceway cover. Receptacle ports on the raceway cover measure 2.35 ′′(60mm) top-to-bottom and 2.88 ′′(73mm) side-to-side. • Non-powered panels ship without receptacle ports in the base raceway cover. • Powered panels with Power Distribution Assemblies (PDA) but without raceway covers require separately specified base raceway covers for power and communication port locations other than the standard powered base raceway cover. • New York City (NYC) electrical applications require field installation of PDA. • New York Port Authority (NYPA) electrical applications require metal raceway covers. To order, specify NYC powered panels without raceway cover and separately specify metal covers through Haworth e-Parts. • Some building codes may restrict the use of panel heights greater than 69 ′′(1753mm). Consult your local code authority to assure that the furniture layout is compliant. • For International Power, specify non-powered panels and use Power Logic components. See Specification Guide for more information on Power Logic. • For Chicago power, specify non-powered panels without a base raceway cover and separately specify Chicago power retrofit kit.

58

April 2008 / USA

Class AA – GSA: Open Market Canadian Conversion Factor: Refer to haworth.com/Canada

UniGroup Too Price List

Laminate Monolithic Panel with Radius Steel Top Cap UniGroup Actual Height Laminate

37′′(940mm)

44′′(1118mm)

50′′(1270mm)

56′′(1422mm)

64′′(1626mm)

68′′(1727mm)

82′′(2083mm)

Width

Non-Powered Number

Price

12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 60′′(1524mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 60′′(1524mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 60′′(1524mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 60′′(1524mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 60′′(1524mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 60′′(1524mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 60′′(1524mm)

EDN-135- B EDN-1835- B EDN-235- B EDN-3035- B EDN-335- B EDN-4235- B EDN-435- B EDN-535- B EDN-142- B EDN-1842- B EDN-242- B EDN-3042- B EDN-342- B EDN-4242- B EDN-442- B EDN-542- B EDN-148- B EDN-1848- B EDN-248- B EDN-3048- B EDN-348- B EDN-4248- B EDN-448- B EDN-548- B EDN-154- B EDN-1854- B EDN-254- B EDN-3054- B EDN-354- B EDN-4254- B EDN-454- B EDN-554- B EDN-162- B EDN-1862- B EDN-262- B EDN-3062- B EDN-362- B EDN-4262- B EDN-462- B EDN-562- B EDN-166- B EDN-1866- B EDN-266- B EDN-3066- B EDN-366- B EDN-4266- B EDN-466- B EDN-566- B EDN-180- B EDN-1880- B EDN-280- B EDN-3080- B EDN-380- B EDN-4280- B EDN-480- B EDN-580- B

$ 718 794 930 992 1038 1132 1200 1361 $ 790 874 931 1028 1085 1184 1247 1410 $ 795 898 952 1055 1113 1216 1284 1481 $ 834 954 1006 1147 1194 1297 1370 1571 $ 878 965 1017 1144 1250 1349 1414 1612 $ 923 1019 1078 1213 1324 1434 1497 1757 $1036 1245 1316 1493 1635 1771 1861 2086

Product marked with this symbol available as GSA open market.

Class AA – GSA: Open Market Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

59

UniGroup Too Price List

Open Frame Panel with Radius Steel Top Cap UniGroup

Open-Frame

EON-B (Non Powered)

C

R

Features

Specification Tips

• Includes non-powered or powered panel assembly, radius steel top cap, with or without one-piece base raceway cover, 1.6 hinge kits, side trim rails, leveling glides and carpet gripper; power distribution assembly/flex connector(s) when power is specified. .6 base raceway end caps are shipped with each panel. Order additional as necessary. • Panel thickness is 2′′(51mm). • Base raceway is 4′′(102mm) high. • Powered raceway with or without raceway cover requires modified catalog number and list price. • Powered panels are available for countries that utilize 120 volt 60 hertz electrical systems and U.S. configured plugs and outlets. • Does not accept top feed modules. • Shipped with unassembled top cap, base raceway cover and side trim rails.

• Panels will accept glazed add-on panels up to a combined height of 82′′(2083mm). For aesthetic consistency, specify UniGroup add-on panels. • Flex connectors provided for powered monolithic panels accommodate straight in-line, inside 90°, and inside 120° conditions (if applicable). • Receptacles for powered panels must be specified separately. • Raceway cover must be separately specified for option -E (no raceway cover). • Additional base raceway cover end caps will need to be specified if finish posts are not ordered.

To Order, Specify: 1) Product number. 2) Trim color for raceway cover, glide housings and end caps.

EOP-B (3-Circuit Powered) EOP-6 (6-Circuit Powered)

3) Trim color for frame, top cap and side trim rails.

US

Non-Powered Panel with Base Raceway Cover, see opposite page. The following options require modification of the 3-Circuit Non-Powered (Example: EON-462-B) product numbers and list prices shown on opposite page:

Panel Width

Non-Powered without Base Raceway Cover (Example: EON-462-BE)

3-Circuit Powered (Example: EOP-462-B)

6-Circuit Powered (Example: EOP-462-6)

or

or

NYC 3-Circuit Powered (Example: EOP-462-BY)

3-Circuit Powered without Base Raceway Cover (Example: EOP-462-BE)

6-Circuit Powered without Base Raceway Cover (Example: EOP-462-6E)

or

or

NYC 6-Circuit Powered (Example: EOP-462-6Y)

NYC 3-Circuit Powered without Base Raceway Cover (Example: EOP-462-BYE)

NYC 6-Circuit Powered without Base Raceway Cover (Example: EOP-462-6YE)

Add:

Add:

Deduct:

Add:

Add:

12′′(305mm)

-$26

$155*

n/a

n/a

n/a

18′′(457mm)

-36

155

n/a

$107

n/a

24′′(610mm)

-44

155

$276

99

$220

36′′(914mm)

-50

155

276

87

208

42′′(1067mm)

-57

155

276

81

202

48′′(1219mm)

-60

155

276

75

196

60′′(1524mm)

-69

155

276

63

184

*The 12 ′′-wide panel has a pass-through connector and a non-powered raceway cover.

NOTES: • Powered panels with raceway covers ship with receptacle ports in the base raceway cover. Receptacle ports on the raceway cover measure 2.35 ′′(60mm) top-to-bottom and 2.88 ′′(73mm) side-to-side. • Non-powered panels ship without receptacle ports in the base raceway cover. • Powered panels with Power Distribution Assemblies (PDA) but without raceway covers require separately specified base raceway covers for power and communication port locations other than the standard powered base raceway cover. • New York City (NYC) electrical applications require field installation of PDA. • New York Port Authority (NYPA) electrical applications require metal raceway covers. To order, specify NYC powered panels without raceway cover and separately specify metal covers through Haworth e-Parts. • Some building codes may restrict the use of panel heights greater than 69 ′′(1753mm). Consult your local code authority to assure that the furniture layout is compliant. • For International Power, specify non-powered panels and use Power Logic components. See Specification Guide for more information on Power Logic. • For Chicago power, specify non-powered panels without a base raceway cover and separately specify Chicago power retrofit kit.

60

April 2008 / USA

Class AA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

UniGroup Too Price List

Open Frame Panel with Radius Steel Top Cap UniGroup Actual Height Open Frame

37′′(940mm)

44′′(1118mm)

64′′(1626mm)

68′′(1727mm)

82′′(2083mm)

Width

Non-Powered Number

Price

12′′(305mm) 18′′(457mm) 24′′(610mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 60′′(1524mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 60′′(1524mm) 12′′(305mm) 24′′(610mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 60′′(1524mm) 12′′(305mm) 24′′(610mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 60′′(1524mm) 12′′(305mm) 24′′(610mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 60′′(1524mm)

EON-135- B EON-1835- B EON-235- B EON-335- B EON-4235- B EON-435- B EON-535- B EON-142- B EON-1842- B EON-242- B EON-342- B EON-4242- B EON-442- B EON-542- B EON-162- B EON-262- B EON-362- B EON-4262- B EON-462- B EON-562- B EON-166- B EON-266- B EON-366- B EON-4266- B EON-466- B EON-566- B EON-180- B EON-280- B EON-380- B EON-4280- B EON-480- B EON-580- B

$ 307 348 386 444 481 518 563 $ 364 404 447 523 564 620 673 $ 543 649 790 837 958 1109 $ 578 688 843 890 1016 1186 $ 658 795 1046 1048 1160 1346

Class AA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

61

UniGroup Too Price List

Glazed Monolithic Panel with Radius Steel Top Cap UniGroup

Glazed

Features

Specification Tips

• Includes non-powered or powered panel assembly, radius steel top cap, with or without one-piece base raceway cover, 1.6 hinge kits, side trim rails, leveling glides and carpet gripper; power distribution assembly/flex connector(s) when power is specified. .6 base raceway end caps are shipped with each panel. Order additional as necessary. • Panel thickness is 2′′(51mm). • Base raceway is 4′′(102mm) high. • Powered raceway with or without raceway cover requires modified catalog number and list price. • Powered panels are available for countries that utilize 120 volt 60 hertz electrical systems and U.S. configured plugs and outlets. • Does not accept top feed modules. • Shipped with unassembled top cap, base raceway cover and side trim rails.

• Panels will accept glazed add-on panels up to a combined height of 82″(2083mm). For aesthetic consistency, specify UniGroup add-on panels. • Flex connectors provided for powered monolithic panels accommodate straight in-line, inside 90°, and inside 120° conditions (if applicable). • Receptacles for powered panels must be specified separately. • Raceway cover must be separately specified for option -E (no raceway cover). • Additional base raceway cover end caps will need to be specified if finish post are not ordered.

To Order, Specify: 1) Product number. 2) Glazing finish color.

EGN-B (Non Powered)

C

R

EGP-B (3-Circuit Powered) EGP-6 (6-Circuit Powered)

3) Trim color for raceway cover, glide housings and end caps. 4) Trim color for frame, top cap and side trim rails.

US

Non-Powered Panel with Base Raceway Cover, see opposite page. The following options require modification of the 3-Circuit Non-Powered (Example: EGN-462-B) product numbers and list prices shown on opposite page:

Panel Width

Non-Powered without Base Raceway Cover (Example: EGN-462-BE)

3-Circuit Powered (Example: EGP-462-B)

6-Circuit Powered (Example: EGP-462-6)

or

or

NYC 3-Circuit Powered (Example: EGP-462-BY)

3-Circuit Powered without Base Raceway Cover (Example: EGP-462-BE)

6-Circuit Powered without Base Raceway Cover (Example: EGP-462-6E)

or

or

NYC 6-Circuit Powered (Example: EGP-462-6Y)

NYC 3-Circuit Powered without Base Raceway Cover (Example: EGP-462-BYE)

NYC 6-Circuit Powered without Base Raceway Cover (Example: EGP-462-6YE)

Add:

Add:

Deduct:

Add:

Add:

12′′(305mm)

-$26

$155*

n/a

n/a

n/a

18′′(457mm)

-36

155

$276

$107

n/a

24′′(610mm)

-44

155

276

99

$220

30′′(762mm)

-46

155

276

96

217

36′′(914mm)

-50

155

276

87

208

42′′(1067mm)

-57

155

276

81

202

48′′(1219mm)

-60

155

276

75

196

60′′(1524mm)

-69

155

276

63

184

*The 12 ′′-wide panel has a pass-through connector and a non-powered raceway cover.

NOTES: • Powered panels with raceway covers ship with receptacle ports in the base raceway cover. Receptacle ports on the raceway cover measure 2.35 ′′(60mm) top-to-bottom and 2.88 ′′(73mm) side-to-side. • Non-powered panels ship without receptacle ports in the base raceway cover. • Powered panels with Power Distribution Assemblies (PDA) but without raceway covers require separately specified base raceway covers for power and communication port locations other than the standard powered base raceway cover. • New York City (NYC) electrical applications require field installation of PDA. • New York Port Authority (NYPA) electrical applications require metal raceway covers. To order, specify NYC powered panels without raceway cover and separately specify metal covers through Haworth e-Parts. • Some building codes may restrict the use of panel heights greater than 69 ′′(1753mm). Consult your local code authority to assure that the furniture layout is compliant. • For International Power, specify non-powered panels and use Power Logic components. See Specification Guide for more information on Power Logic. • For Chicago power, specify non-powered panels without a base raceway cover and separately specify Chicago power retrofit kit.

62

April 2008 / USA

Class AA – GSA: Open Market Canadian Conversion Factor: Refer to haworth.com/Canada

UniGroup Too Price List

Glazed Monolithic Panel with Radius Steel Top Cap UniGroup Actual Height Glazed

44′′(1118mm)

56′′(1422mm)

64′′(1626mm)

68′′(1727mm)

82′′(2083mm)

Width

Non-Powered Number

Clear or Bronze Price

Frosted Price

12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 60′′(1524mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 60′′(1524mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 60′′(1524mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 60′′(1524mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 60′′(1524mm)

EGN-142- B EGN-1842- B EGN-242- B EGN-3042- B EGN-342- B EGN-4242- B EGN-442- B EGN-542- B EGN-154- B EGN-1854- B EGN-254- B EGN-3054- B EGN-354- B EGN-4254- B EGN-454- B EGN-554- B EGN-162- B EGN-1862- B EGN-262- B EGN-3062- B EGN-362- B EGN-4262- B EGN-462- B EGN-562- B EGN-166- B EGN-1866- B EGN-266- B EGN-3066- B EGN-366- B EGN-4266- B EGN-466- B EGN-566- B EGN-180- B EGN-1880- B EGN-280- B EGN-3080- B EGN-380- B EGN-4280- B EGN-480- B EGN-580- B

$ 816 919 1020 1145 1268 1343 1512 1634 $ 790 941 1002 1172 1217 1373 1484 1745 $ 837 950 1064 1184 1306 1467 1578 1838 $ 889 1013 1134 1260 1389 1568 1684 1965 $1023 1198 1374 1524 1666 1880 2018 2328

$ 961 1064 1165 1290 1497 1572 1741 1863 $ 935 1086 1147 1317 1446 1602 1713 1974 $1023 1136 1250 1370 1593 1754 1865 2125 $1075 1199 1320 1446 1676 1855 1971 2252 $1209 1384 1560 1710 1953 2167 2305 2615

Product marked with this symbol available as GSA open market. BLANK BLANK

Class AA – GSA: Open Market Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

63

UniGroup Too Price List

Monolithic Fabric Add-On Panel UniGroup

Fabric

Features

To Order, Specify: 1) Product number.

EAF

• Includes panel, vertical connector (bayonet), light block, side trim rails, two full hinge sets, side trim rail covers and top cap clips. • Fabric add-on panels may be installed above any straight fabric and laminate base or fabric add-on panels.* • Both sides in same fabric; one color or different color each side. • Each base panel will accept two add-on panels. • Lower Level add-on panel will accept overhead components (load bearing). Second add-on panel (top) is non-load bearing. • Utilizes top cap from base panel. • Standard finish posts can be used. • Same construction as UniGroup Monolithic fabric panel.

Specification Tips NOTES: This panel has fabric/ colorway restrictions, see Fabrics/Color Legend. *Add-on panel cannot be used with add-on panels ordered with the SP** prefix.

64

April 2008 / USA

• For mixed fabric surfaces, specify fabric/color for each fabric surface and price at higher grade. • Add-on panels may be stacked a maximum of two high in any order of height above a base panel. • Add-on panel must match panel width. • Combination of panel and add-on panel cannot exceed 82′′(2083mm) in height. • Cannot be used above any door, glazed, legacy videne, open-frame or glazed add-on panels. • Base and add-on panel combinations should match existing base panel heights so that end-of-runs and finish posts can be used without field modification. • Full-height side trim rails required for end-of-run conditions with a base panel and one add-on panel, separately specified. • For two high add-on panel applications specify separately full-height side trim rail for base panel and one high add on, for two high panel add on location use side trim rail that ships with add-on panel. • Clerestory can be added above fabric add-on panels. See Specification Guide for application guidelines.

Class AA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

2) Fabric/colorway for add-on panel side one. 3) Fabric/colorway for add-on panel side two. 4) Trim color for side trim rails, and trim strip.

UniGroup Too Price List

Monolithic Fabric Add-On Panel UniGroup Actual Height Fabric

12′′(305mm)

14′′(356mm)

18′′(437mm)

20′′(437mm)

24′′(610mm)

Width

Number

Fabric Grade A B

C

D

E

F

G

12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm)

EAF-112 EAF-1812 EAF-212 EAF-3012 EAF-312 EAF-4212 EAF-412 EAF-5412 EAF-512 EAF-114 EAF-1814 EAF-214 EAF-3014 EAF-314 EAF-4214 EAF-414 EAF-5414 EAF-514 EAF-118 EAF-1818 EAF-218 EAF-3018 EAF-318 EAF-4218 EAF-418 EAF-5418 EAF-518 EAF-120 EAF-1820 EAF-220 EAF-3020 EAF-320 EAF-4220 EAF-420 EAF-5420 EAF-520 EAF-124 EAF-1824 EAF-224 EAF-3024 EAF-324 EAF-4224 EAF-424 EAF-5424 EAF-524

$433 479 506 531 555 581 605 620 631 $442 491 522 547 569 593 617 630 641 $488 555 581 605 631 655 681 693 713 $504 560 588 616 644 674 695 712 728 $594 620 643 667 692 718 743 755 768

$513 559 586 611 635 661 685 700 711 $522 571 602 627 649 673 697 710 721 $568 635 661 685 711 735 761 773 793 $584 640 668 696 724 754 775 792 808 $674 700 723 747 772 798 823 835 848

$523 569 596 621 645 671 695 710 721 $532 581 612 637 659 683 707 720 731 $578 645 671 695 721 745 771 783 803 $594 650 678 706 734 764 785 802 818 $684 710 733 757 782 808 833 845 858

$533 579 606 631 655 681 705 720 731 $542 591 622 647 669 693 717 730 741 $588 655 681 705 731 755 781 793 813 $604 660 688 716 744 774 795 812 828 $694 720 743 767 800 826 851 863 876

$547 593 620 645 669 695 719 734 745 $556 605 636 661 683 707 731 744 755 $602 669 695 719 745 769 795 807 827 $618 674 702 730 766 796 817 834 850 $708 734 757 781 830 856 881 893 906

$557 603 630 655 679 705 729 744 755 $566 615 646 671 693 717 741 754 765 $612 679 705 729 767 791 817 829 849 $628 684 712 740 794 824 845 862 878 $718 744 767 791 866 892 917 929 942

$473 519 546 571 595 621 645 660 671 $482 531 562 587 609 633 657 670 681 $528 595 621 645 671 695 721 733 753 $544 600 628 656 684 714 735 752 768 $634 660 683 707 732 758 783 795 808

Class AA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

65

UniGroup Too Price List

Monolithic Glazed Add-On Panel UniGroup

Glazed

EAG

NOTE: *Add-on panel cannot be used with add-on panels ordered with the SP** prefix.

Features

To Order, Specify:

• Includes panel, vertical connector (bayonet), light block, side trim rails, two full hinge sets, side trim rail cover, and top cap clips. • Utilizes top cap from base panel. • Glazed add-on panels may be installed above any straight fabric, glazed, laminate, or open-frame base or add-on panels.* • Each base panel will accept two add-on panels. • Glazed add-on panels will not accept any load bearing components. • Top rail of add-on panel will provide top wire management. • Glazing material for English Reeded, Checks Mix, and Vertical Moire is textured on one side only. Recommend installing the textured side to face the interior of the workstation. • Standard finish post and end-of-run posts can be used.

1) Product number, including:

Specification Tips • Specify glazed add-on panel based upon the type of panel, fabric (F) or glazed/open-frame (G), that will be directly below the add-on panel. • Add-on panels may be stacked a maximum of two high in any order of height above a base panel. • Add-on panel must match base panel width. • Combination of base panel and add-on panel cannot exceed 82′′(2083mm) in height. • Base and add-on panel combinations should match existing base panel heights so that end-of-runs and finish posts can be used without field modification. • Cannot be used above doors, or legacy videne panels. • Does not accept top feed modules. • Glazed add-on panels may be retrofitted in the field for use on glazed or fabric base panels. A retrofit kit is available as a service part. • Full-height side trim rails required for end-of-run conditions with a base panel and one add-on panel, separately specified. • For two high add-on panel applications specify separately full-height side trim rail for base panel and one high add on, for two high panel add on location use side trim rail that ships with add-on panel. • Clerestory can be added above glazed add-on panels. See Specification Guide for application guidelines.

66

April 2008 / USA

Class AA – GSA: Open Market Canadian Conversion Factor: Refer to haworth.com/Canada

1

Application Designation F

Glazed add-on panel directly above fabric base panel or fabric add-on panel.

G Glazed add-on panel directly above glazed and open frame base panel or glazed add-on panel, add $23 list. 2) Glazing color or glass pattern. 3) Trim color for frame, side trim rails and trim strip.

UniGroup Too Price List

Monolithic Glazed Add-On Panel UniGroup Actual Height Glazed

12′′(305mm)

14′′(356mm)

18′′(457mm)

20′′(508mm)

24′′(610mm)

Width

Number 1

Clear/Bronze/ Frosted Price

English Reeded Price

Checks Mix/ Vertical Moire Price

12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm)

EAG-112EAG-1812EAG-212EAG-3012EAG-312EAG-4212EAG-412EAG-5412EAG-512EAG-114EAG-1814EAG-214EAG-3014EAG-314EAG-4214EAG-414EAG-5414EAG-514EAG-118EAG-1818EAG-218EAG-3018EAG-318EAG-4218EAG-418EAG-5418EAG-518EAG-120EAG-1820EAG-220EAG-3020EAG-320EAG-4220EAG-420EAG-5420EAG-520EAG-124EAG-1824EAG-224EAG-3024EAG-324EAG-4224EAG-424EAG-5424EAG-524-

$471 519 546 571 595 621 645 666 683 $482 531 560 586 608 632 656 677 698 $528 595 621 645 670 695 721 732 752 $544 600 627 655 683 713 733 763 789 $633 658 681 706 731 756 781 807 824

NA NA $668 705 737 793 869 NA 930 NA NA NA NA NA NA NA NA NA NA NA $696 734 772 828 909 NA 997 NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA

NA NA $ 769 807 840 908 999 NA 1082 NA NA NA NA NA NA NA NA NA NA NA $ 803 840 877 945 1043 NA 1164 NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA

Product marked with this symbol available as GSA open market.

Class AA – GSA: Open Market Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

67

UniGroup Too Price List

Doors with Radius Steel Top Cap UniGroup Actual Height Single Door — Laminate

82′′(2083mm)

Width

Door Swing

Number 1

Price

36′′(914mm) 42′′(1067mm)

Left Left

EDS-380-B L EDS-4280-B L

$1794 1905

Features

To Order, Specify:

• Includes complete panel assembly [hinge sets, carpet gripper, door jamb, side trim rails, leveling glides and trim, hollow core door (1 5/8′′(41mm) thick), door hinges, hardware, brushed chrome knobs or ADA lever with lockset and keys, and threshold]. • Both sides of door covered in same laminate surface color. • Doors are shipped left-hand swing. Field-adjustable for right-hand swing. • No power or communications in base raceway.

1) Product number, including:

1

Handle Designation K Knob H ADA Lever, add $145 list.

2) Laminate surface color. 3) Trim color for raceway covers and glide housings.

Specification Tips

4) Trim color for door jamb, top cap and side trim rails.

• Door may be placed a maximum of 24′′(610mm) from supporting panels at 90°. • Will not accept add-on panel.

NOTES: Door Opening Clearance Door Size

Height

Width

380

78′′(1981mm)

28 3/4′′(730mm)

4280

78′′(1981mm)

34 3/4′′(883mm)

Some building codes may restrict the use of panel heights greater than 69 ′′(1753mm). Consult your local code authority to assure that the furniture layout is compliant prior to installation.

EDS-BKL EDS-BHL

Most building codes for new buildings require a minimum clear door width of 32 ′′(813mm). To meet this requirement, the 42 ′′(1067mm) door must be ordered.

(Left-hand swing)

Single Door with ADA Lever and Kick Plate — Laminate

Actual Height

Width

Hardware

Door Swing

Number

Price

82′′(2083mm)

42′′(1067mm)

Lever

Left

EAC-4280-BHL

$2813

Features

To Order, Specify:

• Includes complete panel assembly [hinge sets, carpet gripper, door jamb, door (1 7/16′′(37mm) thick), door hinges, brushed chrome lever with lockset and keys, threshold, and brushed chrome kick plate with mounting screws]. • Both sides of door covered in same laminate surface color. • Doors are shipped left-hand swing. Field-adjustable for right-hand swing. • No power or communications in base raceway.

1) Product number.

Specification Tips

NOTES:

• Door may be placed a maximum of 24′′(610mm) from supporting panels at 90°. • Will not accept add-on panel.

Some building codes may restrict the use of panel heights greater than 69 ′′(1753mm). Consult your local code authority to assure that the furniture layout is compliant prior to installation.

Door Opening Clearance Door Size

Height

Width

4280

78′′(1981mm)

34 3/4′′(883mm)

EAC-4280-BHL

(Left-hand swing)

68

April 2008 / USA

Class AA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

2) Laminate surface color. 3) Trim color for raceway covers and glide housings. 4) Trim color for door jamb, top cap and side trim rails.

Most building codes for new buildings require a minimum clear door width of 32 ′′(813mm). To meet this requirement, the 42 ′′(1067mm) door must be ordered.

UniGroup Too Price List

Doors with Radius Steel Top Cap UniGroup Actual Height Single Door — Glazed

82′′(2083mm)

Width

Number

36′′(914mm) 42′′(1067mm)

EDG-380-B EDG-4280-B

1 2

Clear or Bronze Price

Frosted Price

$2400 2627

$2680 2914

Features

To Order, Specify:

• Includes complete panel assembly [hinge sets, carpet gripper, door jamb, side trim rails and trim, door (1 5/8′′(41mm) thick with 1/4′′(6mm) glazing), door hinges, hardware, brushed chrome knobs or ADA lever with lockset and keys, and threshold]. • Both sides of door covered in same laminate surface color. • Door swing not field changeable. • No power or communications in base raceway.

1) Product number, including:

1

Handle Designation K Knob H ADA Lever, add $145 list.

2

Door Swing L

Specification Tips • Door may be placed a maximum of 24′′(610mm) from supporting panels at 90°. • Will not accept add-on panel.

R Right 2) Glazing finish color. 3) Laminate surface color.

Door Opening Clearance Door Size

Height

Width

380

78′′(1981mm)

28 3/4′′(730mm)

4280

78′′(1981mm)

34 3/4′′(883mm)

Left

4) Trim color for raceway covers and glide housings. 5) Trim color for door jamb, top cap and side trim rails.

NOTES: EDG-BKL EDG-BHL

(Left-hand swing)

Some building codes may restrict the use of panel heights greater than 69 ′′(1753mm). Consult your local code authority to assure that the furniture layout is compliant prior to installation. Most building codes for new buildings require a minimum clear door width of 32 ′′(813mm). To meet this requirement, the 42 ′′(1067mm) door must be ordered.

(Right-hand swing)

Single Door — Glazed, with Classic Muntins

Actual Height 82′′(2083mm)

Width

Number

36′′(914mm) 42′′(1067mm)

EDMC-380-B EDMC-4280-B

1 2

Frosted Price

$2936 3148

$3223 3435

Features

To Order, Specify:

• Includes complete panel assembly [hinge sets, carpet gripper, door jamb, side trim rails and trim, door (1 5/8′′(41mm) thick with 1/4′′(6mm) glazing), door hinges, hardware, brushed chrome knobs or ADA lever with lockset and keys, threshold, and muntins]. • Both sides of door covered in same laminate surface color. • Door swing not field changeable. • No power or communications in base raceway.

1) Product number, including:

1

Handle Designation K Knob H ADA Lever, add $145 list.

2

Door Swing

Specification Tips

L

• Door may be placed a maximum of 24′′(610mm) from supporting panels at 90°. • Will not accept add-on panel.

R Right

Door Opening Clearance Door Size

Height

Width

380

78′′(1981mm)

28 3/4′′(730mm)

4280

78′′(1981mm)

34 3/4′′(883mm)

EDMC-BKL EDMC-BHL

(Left-hand swing)

Clear or Bronze Price

Left

2) Glazing finish color. 3) Laminate surface color. 4) Trim color for raceway covers and glide housings. 5) Trim color for door jamb, top cap, muntins and side trim rails.

NOTES: Some building codes may restrict the use of panel heights greater than 69 ′′(1753mm). Consult your local code authority to assure that the furniture layout is compliant prior to installation. (Right-hand swing)

Most building codes for new buildings require a minimum clear door width of 32 ′′(813mm). To meet this requirement, the 42 ′′(1067mm) door must be ordered.

Class AA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

69

UniGroup Too Price List

if Panel Attached Screen UniGroup

if Panel Attached Screen

Height

Width

Description

Number

Price

47′′(1194mm) 52′′(1321mm) 63′′(1600mm) 47′′(1194mm) 52′′(1321mm) 63′′(1600mm) 52′′(1321mm) 63′′(1600mm)

48′′(1219mm)

Fabric

48′′(1219mm)

Frosted Insert

48′′(1219mm)

Perforated Metal

BBP-4748-FH BBP-5248-FH BBP-6348-FH BBP-4748-GH BBP-5248-GH BBP-6348-GH BBP-5248-PH BBP-6348-PH

$ 815 860 906 $ 999 1058 1116 $1087 1146

Features BBP-FH BBP-GH BBP-PH

To Order, Specify:

• Includes screen, two non-locking casters on post legs and attachment brackets. • Fabric and perforated metal insert screens have no acoustical or tackable value. • Screens are non-load bearing. • Magnets can be used with perforated metal inserts. • Frosted insert is identical to frosted and textured acrylic material used in if desktop screens. • Brackets are shipped unassembled.

Fabric Insert 1) Product number. 2) Screen fabric insert color. FB-1 Warm Neutral FB-2 Cool Neutral 3) Metallic trim color for frame. 4) Trim color for panel attachment brackets. 5) Trim color for casters.

Specification Tips • Screens can mount on any width panel but panel runs must be at least 48′′(1219mm). • Screens mount on a panel taller than height of screen only. • Screen adds 2′′(51mm) to panel width in stored position. • Screen extends 42′′(1067mm) from end of panel in fully extended position. • Screens mount parallel with panel, off panel end only. • Screen adds 2′′(51mm) to panel thickness. • Bracket is panel specific to UniGroup Too, UniGroup and PLACES. • Panel attached screen brackets may interfere with components mounted to opposite side of panel. • Fabric screen insert available in warm and cool neutral only. • Screens are non-handed; brackets can be attached to either side. • See Specification Guide for additional information.

70

April 2008 / USA

Class IF – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

Frosted Insert 1) Product number. 2) Trim color for frame. 3) Trim color for panel attachment brackets. 4) Metal trim color for casters.

Metal Insert 1) Product number. 2) Trim color for frame. 3) Trim color for perforated metal insert. 4) Trim color for panel attachment brackets. 5) Metallic trim color for casters.

UniGroup Too Price List

Panel Accessories UniGroup

Painted Muntin Kit — Classic

Panel Height

Panel Width

Number

Price

44′′(1118mm)

18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 60′′(1524mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 60′′(1524mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 60′′(1524mm)

MSC-1842 MSC-242 MSC-3042 MSC-342 MSC-4242 MSC-442 MSC-542 MSC-1866 MSC-266 MSC-3066 MSC-366 MSC-4266 MSC-466 MSC-566 MSC-1880 MSC-280 MSC-3080 MSC-380 MSC-4280 MSC-480 MSC-580

$350 353 387 390 433 436 458 $391 394 433 436 486 489 510 $421 425 467 470 524 527 554

68′′(1727mm)

82′′(2083mm) MSC

Features

To Order, Specify:

• Includes set of muntins for each side of glazed panel, and attachment hardware. • Requires field assembly. • Apply to glazed panels in heights and widths listed. • Muntins are 1/2′′(12mm) thick.

1) Product number. 2) Trim color.

Specification Tips • Glazed panel must be separately specified. • Applicable to UniGroup and PLACES glazed panels.

Painted Muntin Kit — Horizontal

44′′(1118mm)

12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 48′′(1219mm) 60′′(1524mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 48′′(1219mm) 60′′(1524mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 48′′(1219mm) 60′′(1524mm)

68′′(1727mm)

82′′(2083mm)

MSH

MSH-142 MSH-1842 MSH-242 MSH-3042 MSH-342 MSH-442 MSH-542 MSH-166 MSH-1866 MSH-266 MSH-3066 MSH-366 MSH-466 MSH-566 MSH-180 MSH-1880 MSH-280 MSH-3080 MSH-380 MSH-480 MSH-580

Features

To Order, Specify:

• Includes set of muntins for each side of glazed panel, and attachment hardware. • Requires field assembly. • Apply to glazed panels in heights and widths listed. • Muntins are 1/2′′(12mm) thick.

1) Product number.

$181 261 300 320 331 377 394 $222 318 353 374 390 436 458 $240 347 383 411 423 471 500

2) Trim color.

Specification Tips • Glazed panel must be separately specified. • Applicable to UniGroup and PLACES glazed panels. Class BA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

71

UniGroup Too Price List

Panel Accessories UniGroup

Wainscot Kit Painted Rail — Fabric Panel

Installed Height

Panel Width

Number

Price

30′′(762mm)

12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 60′′(1524mm)

WK-129 WK-1829 WK-229 WK-3029 WK-329 WK-4229 WK-429 WK-529

$268 285 293 308 315 330 337 352

Features

To Order, Specify:

• Includes set of two (2) recessed fabric panels (1 for each side), two (2) rails, and attachment hardware. • Requires field assembly. • Apply to both sides of any glazed panel. • For mixed fabric surfaces, specify fabric/color for each side.

1) Product number.

Specification Tips

2) Fabric/colorway for panel side one. 3) Fabric/colorway for panel side two. 4) Rail trim color. $23 upcharge (list) for Metallic trim color.

• Glazed panel must be separately specified. • Can be used with UniGroup Too, UniGroup and PLACES glazed panels.

WK

Wainscot with Horizontal Muntins — Painted Rail and Muntins — Fabric Panel

68′′(1727mm)

82′′(2083mm)

12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 60′′(1524mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 60′′(1524mm)

WMSH-166 WMSH-1866 WMSH-266 WMSH-3066 WMSH-366 WMSH-4266 WMSH-466 WMSH-566 WMSH-180 WMSH-1880 WMSH-280 WMSH-3080 WMSH-380 WMSH-4280 WMSH-480 WMSH-580

$492 602 657 691 720 757 792 827 $517 621 689 727 757 792 820 861

18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 60′′(1524mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 60′′(1524mm)

WMSC-1866 WMSC-266 WMSC-3066 WMSC-366 WMSC-4266 WMSC-466 WMSC-566 WMSC-1880 WMSC-280 WMSC-3080 WMSC-380 WMSC-4280 WMSC-480 WMSC-580

$696 720 759 785 832 860 902 $718 741 783 810 858 888 931

WMSH

Wainscot with Classic Muntins 68′′(1727mm) Painted — Rail and Muntins — Fabric Panel

82′′(2083mm)

WMSC

Common Features

To Order, Specify:

• Includes set of two (2) recessed fabric panels (1 for each side), two (2) rails, set of muntins for each side, and attachment hardware. • Requires field assembly. • Apply to both sides of glazed panels in sizes listed. • For mixed fabric surfaces, specify fabric/color for each side.

1) Product number.

Specification Tips • Glazed panel must be separately specified. • Can be used with UniGroup and PLACES glazed panels.

72

April 2008 / USA

Class BA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

2) Fabric/colorway for panel side one. 3) Fabric/colorway for panel side two. 4) Rail/muntin trim color.

UniGroup Too Price List

Panel Accessories UniGroup Actual Height 90° Finish Post — Radius Wood Top Cap— Fabric Surface

30′′(762mm) 37′′(940mm) 44′′(1118mm) 50′′(1270mm) 56′′(1422mm) 64′′(1626mm) 68′′(1727mm) 82′′(2083mm)

Width

Number

Price

2′′(51mm)

PFWC-28-B PFWC-35-B PFWC-42-B PFWC-48-B PFWC-54-B PFWC-62-B PFWC-66-B PFWC-80-B

$113 116 123 128 132 135 144 150

Features

To Order, Specify:

• Includes 90° fabric vertical cover, radius wood top cap and base raceway cover. • Required by UL for covering base raceway flexible and straight-span power connectors when power connector covers are not used. • Finish posts are required for wood top cap panel configurations.

1) Product number. 2) Fabric surface and color. 3) Trim color for raceway cover. 4) Wood finish color for top cap.

PFWC-B

90° Finish Post — Radius Steel Top Cap— Fabric Surface

30′′(762mm) 37′′(940mm) 44′′(1118mm) 50′′(1270mm) 56′′(1422mm) 64′′(1626mm) 68′′(1727mm) 82′′(2083mm)

2′′(51mm)

FPFC-28-B FPFC-35-B FPFC-42-B FPFC-48-B FPFC-54-B FPFC-62-B FPFC-66-B FPFC-80-B

Features

To Order, Specify:

• Includes 90° fabric vertical cover, radius steel top cap and base raceway cover. • Required by UL for covering base raceway flexible and straight-span power connectors when power connector covers are not used.

1) Product number.

$72 75 78 83 85 86 95 97

2) Fabric surface and color. 3) Trim color for raceway cover. 4) Trim color for top cap.

FPFC-B

90° Finish Post — Radius Steel Top Cap— Painted Surface

30′′(762mm) 37′′(940mm) 44′′(1118mm) 50′′(1270mm) 56′′(1422mm) 64′′(1626mm) 68′′(1727mm) 82′′(2083mm)

2′′(51mm)

FPPC-28-B FPPC-35-B FPPC-42-B FPPC-48-B FPPC-54-B FPPC-62-B FPPC-66-B FPPC-80-B

Features

To Order, Specify:

• Includes 90° painted vertical cover, radius steel top cap and base raceway cover. • Required by UL for covering base raceway flexible and straight-span power connectors when power connector covers are not used.

1) Product number.

$70 73 76 81 83 84 93 95

2) Paint surface color. 3) Trim color for raceway cover. 4) Trim color for top cap.

FPPC-B

90° Power Connector Cover — Radius Profile

4′′(102mm)

PCC-90-B

Features

To Order, Specify:

• Includes six power connector covers. • Required by UL for covering flexible power connector in 90° panel configurations when a finish post is not used.

1) Product number.

$55

2) Trim color.

Specification Tip PCC-90-B

• For use with UniGroup and PLACES panels.

Class AA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

73

UniGroup Too Price List

Panel Accessories UniGroup Actual Height 120° Finish Post — Radius Steel Top Cap — Fabric Surface

44′′(1118mm) 64′′(1626mm)

Width

Number

Price

2′′(51mm)

SPLB-2878 SPLA-1524

$225 236

Features

To Order, Specify:

• Includes 120° fabric vertical cover and radius steel cap and base raceway cover. • Required by UL for covering raceway flexible and straight-span power connectors when power connector covers are not available.

1) Product number.

SPLA-1524 SPLB-2878

74

April 2008 / USA

Class AA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

2) Fabric surface and color. 3) Trim color for raceway cover. 4) Trim color for top cap.

UniGroup Too Price List

Panel Accessories UniGroup Actual Height 180° Finish Post — Radius Wood Top Cap — Fabric Surface

30′′(762mm) 37′′(940mm) 44′′(1118mm) 50′′(1270mm) 56′′(1422mm) 64′′(1626mm) 68′′(1727mm) 82′′(2083mm)

Width

Number

Price

2′′(51mm)

PFWS-28-B PFWS-35-B PFWS-42-B PFWS-48-B PFWS-54-B PFWS-62-B PFWS-66-B PFWS-80-B

$ 75 80 84 90 96 97 100 105

Features

To Order, Specify:

• Includes 180° fabric vertical cover, radius wood top cap and base raceway cover. • Required by UL for covering base raceway flexible and straight-span power connectors when power connector covers are not used. • Finish posts are required for wood top cap panel configurations.

1) Product number. 2) Fabric surface and color. 3) Trim color for raceway cover. 4) Wood finish color for top cap.

PFWS-B

180° Finish Post — Radius Steel 30′′(762mm) 37′′(940mm) Top Cap — Fabric Surface

2′′(51mm)

44′′(1118mm) 50′′(1270mm) 56′′(1422mm) 64′′(1626mm) 68′′(1727mm) 82′′(2083mm)

FPFS-28-B FPFS-35-B FPFS-42-B FPFS-48-B FPFS-54-B FPFS-62-B FPFS-66-B FPFS-80-B

Features

To Order, Specify:

• Includes 180° fabric vertical cover, radius steel top cap and base raceway cover. • Required by UL for covering base raceway flexible and straight-span power connectors when power connector covers are not used.

1) Product number.

$60 65 69 75 76 79 83 88

2) Fabric surface and color. 3) Trim color for raceway cover. 4) Trim color for top cap.

FPFS-B

180° Finish Post — Radius Steel 30′′(762mm) 37′′(940mm) Top Cap — Painted Surface

2′′(51mm)

44′′(1118mm) 50′′(1270mm) 56′′(1422mm) 64′′(1626mm) 68′′(1727mm) 82′′(2083mm)

FPPS-28-B FPPS-35-B FPPS-42-B FPPS-48-B FPPS-54-B FPPS-62-B FPPS-66-B FPPS-80-B

Features

To Order, Specify:

• Includes 180° painted vertical cover, radius steel top cap and base raceway cover. • Required by UL for covering base raceway flexible and straight-span power connectors when power connector covers are not used.

1) Product number.

$58 63 67 73 74 77 81 86

2) Paint surface color. 3) Trim color for raceway cover. 4) Trim color for top cap.

FPPS-B

180° Power Connector Cover

4′′(102mm)

PCC-180-B

Features

To Order, Specify:

• Includes six power connector covers. • Required by UL for covering straight-span or flexible power connectors in 180°, three-way panel configurations when a finish post is not used.

1) Product number.

$55

2) Trim color.

PCC-180-B

Specification Tip • For use with UniGroup Too, UniGroup and PLACES panels. Class AA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

75

UniGroup Too Price List

Panel Accessories UniGroup Actual Height End-of-Run Finish Post — Radius Wood Top Cap — Wood Surface

30′′(762mm) 37′′(940mm) 44′′(1118mm) 50′′(1270mm) 56′′(1422mm) 64′′(1626mm) 68′′(1727mm) 82′′(2083mm)

Width

Depth or Thickness

2′′(51mm)

1/2′′(13mm)

Number

Price

ERRW-28-B ERRW-35-B ERRW-42-B ERRW-48-B ERRW-54-B ERRW-62-B ERRW-66-B ERRW-80-B

$ 95 104 116 128 142 158 169 206

Features

To Order, Specify:

• Includes wood vertical cover, radius wood top cap and base raceway cover. • Required for wood top cap panel configurations whenever metal side rail is exposed at end of panel run.

1) Product number. 2) Wood finish color.

ERRW-B

End-of-Run — Variable Height Finish Post Coped End — Radius Wood Top Cap — Wood Surface

ERRW

4′′(102mm) 6′′(152mm) 7′′(178mm) 8′′(203mm) 12′′(305mm) 13′′(330mm) 14′′(356mm) 18′′(457mm) 19′′(483mm) 20′′(508mm) 24′′(610mm) 26′′(660mm) 27′′(686mm) 31′′(787mm) 32′′(813mm) 34′′(864mm) 38′′(965mm) 45′′(1143mm) 52′′(1321mm)

2′′(51mm)

1/2′′(13mm)

Features

To Order, Specify:

• Includes wood vertical cover with coped end and radius wood top cap. • Required for wood top cap panel configurations whenever metal side rail is exposed at end of panel run. • Install on exposed portion of taller panel side rail where two panels of different heights meet, or • Install in conjunction with finish posts with variable height condition. • Determine correct height by subtracting the height of the shorter panel from the height of the taller panel.

1) Product number.

Specification Tips • For exposed portion of taller panel where two or more sides meet. Order taller finish post and field cut straight edge. • Use for in-line panel applications.

76

April 2008 / USA

ERRW-4 ERRW-6 ERRW-7 ERRW-8 ERRW-12 ERRW-13 ERRW-14 ERRW-18 ERRW-19 ERRW-20 ERRW-24 ERRW-26 ERRW-27 ERRW-31 ERRW-32 ERRW-34 ERRW-38 ERRW-45 ERRW-52

Class AA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

2) Wood finish color.

$ 45 47 51 57 64 65 68 76 80 81 87 89 90 102 103 104 112 118 131

UniGroup Too Price List

Panel Accessories UniGroup Height Radius Steel Top Cap for 3-Way 3/4′′(19mm) and 4-Way Feature

Width

Depth

Number

Price

2′′(51mm)

2′′(51mm)

FPC-2

$20

To Order, Specify:

• Includes one plastic top cap. • Fills gap at intersection of four UniGroup radius steel top cap panels.

1) Product number. 2) Trim color.

FPC-2

90° Top Cap for Radius Wood Top Cap — Wood Surface

7/8′′(22mm)

2′′(51mm)

2′′(51mm)

FPCW-2

Features

To Order, Specify:

• Includes one cap and mounting hardware. • Fills gap at intersection of four UniGroup radius wood top cap panels.

1) Product number.

$38

2) Wood finish color.

FPCW-2

7/8′′(22mm) 90° Top Cap for 2-Way and 3-Way — Radius Wood Top Cap

PCCW-2 (90° Finish Post Cap)

2′′(51mm)

PCCW-2 PCSW-2

Features

To Order, Specify:

• Includes one cap and mounting hardware. • For field replacement only.

1) Product number.

$ 37 37

2) Wood finish color.

PCSW-2 (180° Finish Post Cap)

Radius Wood Top Cap Kit

TCSW

2′′(51mm)

7/8′′(22mm)

12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm)

2′′(51mm)

TCSW-1 TCSW-18 TCSW-2 TCSW-30 TCSW-3 TCSW-42 TCSW-4 TCSW-54 TCSW-5

Features

To Order, Specify:

• Includes top cap, panel alignment clip and mounting hardware. • For replacement of radius steel and radius wood top cap.

1) Product number.

Class AA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

$ 47 62 78 95 108 122 137 153 168

2) Wood finish color.

April 2008 / USA

77

UniGroup Too Price List

Panel Accessories UniGroup

Full-Height Side Trim Rails — for use with Add-On Panels

Base Panel Height/ Add-On Panel

Number

Price

44′′(1118mm) 50′′(1270mm) 56′′(1422mm) 64′′(1626mm) 68′′(1727mm) 64′′(1626mm) 68′′(1727mm) 68′′(1727mm) 82′′(2083mm) 82′′(2083mm)

30′′(762mm)/14′′(356mm) 30′′(762mm)/20′′(508mm) 44′′(1118mm)/12′′(305mm) 44′′(1118mm)/20′′(508mm) 44′′(1118mm)/24′′(610mm) 50′′(1270mm)/14′′(356mm) 50′′(1270mm)/18′′(457mm) 56′′(1422mm)/12′′(305mm) 64′′(1626mm)/18′′(457mm) 68′′(1727mm)/14′′(356mm)

SREH-2814 SREH-2820 SREH-4212 SREH-4220 SREH-4224 SREH-4814 SREH-4818 SREH-5412 SREH-6218 SREH-6614

$51 64 73 77 77 85 85 85 88 88

Feature

To Order, Specify:

• Includes one full height side trim rail.

1) Product number.

Specification Tips

2) Trim color.

• For use with base panel and one add-on panel. • For two high add-on panel applications specify separately full-height side trim rail for base panel and one high add-on, for two high panel location use side trim rail that ships with add-on panel. See Specification Guide for application guidelines.

SREH

Side Trim Rail

SRE

Hinges

HE

78

Height

April 2008 / USA

Panel Height

Number

Price

30′′(762mm) 37′′(940mm) 44′′(1118mm) 50′′(1270mm) 56′′(1422mm) 64′′(1626mm) 68′′(1727mm) 82′′(2083mm)

SRE-28 SRE-35 SRE-42 SRE-48 SRE-54 SRE-62 SRE-66 SRE-80

$ 56 56 56 63 63 67 71 74

Features

To Order, Specify:

• • • • •

1) Product number.

Includes one side trim rail. Specify two side rails for each condition. Two side rails are included with each panel. Order as replacement only. For UniGroup panels only.

Panel Height

Hinge Width

30′′(762mm) 37′′(940mm) 44′′(1118mm) 50′′(1270mm) 56′′(1422mm) 64′′(1626mm) 68′′(1727mm) 82′′(2083mm)

1 1/8′′(29mm)

2) Trim color.

Number

Price

HE-28 HE-35 HE-42 HE-48 HE-54 HE-62 HE-66 HE-80

$ 9 9 10 11 11 12 13 16

Features

To Order, Specify:

• Includes one hinge set for one side of trim rail. • For replacement only (hinges are included with panels). • One hinge set connects every two panels for angular connections. • Two hinges set are used for straight-line conditions.

1) Product number.

Class AA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

2) Trim color.

UniGroup Too Price List

Panel Accessories UniGroup

Wall Track

Height

Depth

Width

Number

Price

60′′(1524mm) 72′′(1829mm) 84′′(213mm)

3/4′′(19mm)

5/8′′(16mm)

WT-60 WT-72 WT-84

$101 123 137

Features

To Order, Specify:

• Includes two wall tracks and attachment screws (#10 2 1/2′′ long). • For attachment of components to structural walls. • See installation instructions for proper mounting.

1) Product number. 2) Trim color for screws. 3) Trim color for track.

Specification Tip • Not for use with up-mount overhead storage unit. WT

Wall Mount Kit

WMK

Panel Height

Number

Price

30′′(762mm) 37′′(940mm) 44′′(1118mm) 50′′(1270mm) 56′′(1422mm) 64′′(1626mm) 68′′(1727mm) 82′′(2083mm)

WMK-30 WMK-35 WMK-42 WMK-48 WMK-54 WMK-62 WMK-66 WMK-80

$ 54 64 71 79 88 102 107 130

Features

To Order, Specify:

• Includes wall-mount channel, hinges and screws. • For mounting panels, with or without add-on panel, to a structural wall. • Adds 1/4′′(6mm) to the panel width.

1) Product number. 2) Trim color.

Specification Tip • Must be properly anchored to a structural wall.

T-Mount Kit — Center and End Conditions

TMKT-B

Panel Height

Number

Price

30′′(762mm) 37′′(940mm) 44′′(1118mm) 50′′(1270mm) 56′′(1422mm) 64′′(1626mm) 68′′(1727mm) 82′′(2083mm)

TMKT-28-B TMKT-35-B TMKT-42-B TMKT-48-B TMKT-54-B TMKT-62-B TMKT-66-B TMKT-80-B

$ 79 85 89 101 110 129 136 153

Features

To Order, Specify:

• Includes pre-drilled side rail, center-mount brackets, end-mount brackets, light block extrusions, glide housing, and screws. • Brackets included for both center- and end-mount T-conditions. • Connects two panels in a T-condition. T-mount can attach to a base panel and one fabric add-on panel. Configuration coming off of a T-mount cannot contain add-on panels.

1) Product number. 2) Trim color.

Specification Tips • Both panels in a T-mount condition must be of equal height. • Cannot mount on glazed panels, glazed add-on panels or doors. • For use with UniGroup panels.

Class AA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

79

UniGroup Too Price List

Panel Accessories UniGroup

All-Purpose Hook

Actual Height

Depth

Width

Number

Price

1′′(25mm)

3′′(76mm)

5/8′′(16mm)

CH-8

$80

Features

To Order, Specify:

• Includes eight hooks. • Attaches to panel steel top cap. • For use with UniGroup panels only.

1) Product number. 2) Trim color.

CH-8

Class AA HAB-0001

Seismic Anchoring Bracket

$125

Features

To Order, Specify:

• Includes package of six formed steel brackets. • For seismic anchoring of UniGroup Too, UniGroup and PLACES panels.

1) Product number. (No finish specification required.)

HAB

Class BA 7031-0501

Friction Pad Feature

To Order, Specify:

• Includes six pads.

1) Product number. (No finish specification required.)

Specification Tip • Attaches to bottom of glide to prevent movement of panels on hard surface flooring.

7031-0501

Class BA

2/90 Sign Systems

2/90 Sign Systems is a recommended signage program for use with Haworth Systems. Signage options include ADA-compliant panel-mounted name signs, department signs, building directories, in/out boards, restroom and no smoking signs. For inquiries, catalogs or orders, contact System 2/90 directly at 1-800-777-4310, fax (616) 656-4300, P.O. Box 888289, Grand Rapids, MI 49588-8289.

80

April 2008 / USA

$6

SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

UniGroup Too Price List

Panel Accessories UniGroup

Pre-hinged Side Trim Rails — Angled or Straight-Line Conditions

HIAE (Angled) HISE (Straight)

Panel Height

Angled Number

Price

Straight Number

Price

30′′(762mm) 37′′(940mm) 44′′(1118mm) 50′′(1270mm) 56′′(1422mm) 64′′(1626mm) 68′′(1727mm) 82′′(2083mm)

HIAE-28 HIAE-35 HIAE-42 HIAE-48 HIAE-54 HIAE-62 HIAE-66 HIAE-80

$ 65 77 86 95 106 114 125 142

HISE-28 HISE-35 HISE-42 HISE-48 HISE-54 HISE-62 HISE-66 HISE-80

$ 81 92 104 114 125 133 146 164

Features

To Order, Specify:

• • • •

1) Product number.

Specify pre-hinged trim rails to reduce the installation time. Angled hinges contain two trim rails and one hinge set. Straight line hinges contain two rails and two hinge sets. For panels using pre-hinged trim rails, order fabric panels without side trim rails using the instructions below. • Available for UniGroup fabric panels only. • Not for use with Add-on panels.

2) Trim color.

Use the following chart to determine the number of pre-hinged trim rails, additional trim rails and hinges needed: Pre-hinged Trim Rails Condition

Straight

Angled

HISE Straight/In-line 2-Way/Corner 3-Way 4-Way End of Run

Side Trim Rail

Hinge Kits

HIAE

SRE

HE

1 1 2

1

1 2

1

1

Options • To order a panel with no raceway cover, add an E suffix to the product number and deduct the amount shown below (based on panel width). • To order a fabric panel with no side trim rails, add a J suffix to the product number and deduct the amount shown below (based on panel height). • To order a fabric panel with no raceway cover and side trim rails, add a K suffix to the product number and deduct the amount shown below (based on panel width and height).

Panel Width

Non-powered Panels Panel Height 30′′(762mm) 37′′(940mm) 44′′(1118mm) 50′′(1270mm) 56′′(1422mm) 64′′(1626mm) 68′′(1727mm) 82′′(2083mm)

12′′(305mm)

Option J no side trim rails -$50 -59 -66 -74 -84 -91 -98 -114

30′′(762mm) 37′′(940mm) 44′′(1118mm) 50′′(1270mm) 56′′(1422mm) 64′′(1626mm) 68′′(1727mm) 82′′(2083mm)

18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm)

Option E no raceway cover -$ 26

-$36

-$44

-$46

-$50

-$57

-$60

-$63

-$69

-78 -85 -92 -101 -110 -118 -125 -141

-86 -92 -102 -109 -118 -128 -133 -151

-95 -102 -110 -117 -128 -135 -141 -159

-97 -105 -112 -119 -130 -138 -144 -161

-102 -109 -117 -125 -134 -142 -149 -166

-108 -114 -124 -131 -140 -149 -155 -171

-110 -117 -126 -133 -142 -152 -158 -174

-113 -122 -130 -137 -146 -155 -161 -179

-119 -128 -135 -142 -153 -161 -167 -184

12′′(305mm)

18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm)

Option K no raceway cover and side trim rails

Panel Width

Powered Panels Panel Height

Examples: EMN-366-BE Panel without raceway cover EMN-366-BJ Panel without side trim rails EMN-366-BK Panel without raceway cover and side trim rails

Option J no side trim rails -$50 -59 -66 -74 -84 -91 -98 -114

Option E no raceway cover N/A

-$48

-$56

-$59

-$68

-$74

-$80

-$86

-$92

-100 -107 -114 -123 -132 -140 -146 -163

-107 -113 -123 -130 -139 -147 -154 -170

-109 -116 -125 -132 -141 -151 -156 -172

-118 -126 -134 -141 -152 -160 -166 -183

-125 -132 -140 -147 -158 -140 -171 -189

-131 -138 -146 -154 -163 -171 -179 -194

-137 -144 -153 -160 -169 -179 -184 -201

-144 -152 -160 -167 -177 -185 -191 -208

Class AA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

Option K no raceway cover and side trim rails

April 2008 / USA

81

UniGroup Too Price List

Monolithic Wood Panel with Low Profile Wood Top Cap PLACES

Wood

Features

Specification Tips

• Includes non-powered or powered panel assembly, low profile top cap with aligner, with or without one-piece base raceway cover, 1.6 hinge kits, side trim rails, leveling glides and carpet gripper; power distribution assembly/flex connector(s) when power is specified. 6 base raceway end caps are shipped with each panel. Order additional as necessary. • Panel thickness is 2′′(51mm). • Base raceway is 4′′(102mm) high. • Powered raceway with or without raceway cover requires modified catalog number and list price. • Powered panels are available for countries that utilize 120 volt 60 hertz electrical systems and U.S. configured plugs and outlets. • Shipped with unassembled top cap, base raceway cover and side trim rails.

• Wood top cap panels require finish posts, including end conditions and variable height conditions. • Panels will accept add-on panels up to a combined height of 82″(2083mm). For aesthetic consistency, specify PLACES add-on panels. • Flex connectors provided for powered monolithic panels accommodate straight in-line, inside 90°, and inside 120° conditions (if applicable). • Receptacles for powered panels must be specified separately. • Raceway cover must be separately specified for option -E (no raceway cover).

To Order, Specify: 1) Product number. 2) Wood finish color for panel side one. 3) Wood finish color for panel side two.

HWN-T (Non Powered)

C

R

HWP-T (3-Circuit Powered) HWP-T6 (6-Circuit Powered)

4) Trim color for raceway cover, glide housings, end caps and side trim rails. 5) Wood finish color for top cap.

US

Non-Powered Panel with Base Raceway Cover, see opposite page. The following options require modification of the 3-Circuit Non-Powered (Example: HWN-4864-T) product numbers and list prices shown on opposite page:

Panel Width

Non-Powered without Base Raceway Cover (Example: HWN-4864-TE)

3-Circuit Powered (Example: HWP-4864-T)

6-Circuit Powered (Example: HWP-4864-T6)

or

or

NYC 3-Circuit Powered (Example: HWP-4864-TY)

3-Circuit Powered without Base Raceway Cover (Example: HWP-4864-TE)

6-Circuit Powered without Base Raceway Cover (Example: HWP-4864-T6E)

or

or

NYC 6-Circuit Powered (Example: HWP-4864-T6Y)

NYC 3-Circuit Powered without Base Raceway Cover (Example: HWP-4864-TYE)

NYC 6-Circuit Powered without Base Raceway Cover (Example: HWP-4864-T6YE)

Add:

Deduct:

Add:

Add:

Add:

12′′(305mm)

-$26

$155*

n/a

n/a

n/a

18′′(457mm)

-36

155

n/a

$107

n/a

24′′(610mm)

-44

155

$276

99

$220

30′′(762mm)

-46

155

276

96

217

36′′(914mm)

-50

155

276

87

208

42′′(1067mm)

-57

155

276

81

202

48′′(1219mm)

-60

155

276

75

196

*The 12 ′′-wide panel has a pass-through connector and a non-powered raceway cover.

NOTES: • Powered panels with raceway covers ship with receptacle ports in the base raceway cover. Receptacle ports on the raceway cover measure 2.35 ′′(60mm) top-to-bottom and 2.88 ′′(73mm) side-to-side. • Non-powered panels ship without receptacle ports in the base raceway cover. • Powered panels with Power Distribution Assemblies (PDA) but without raceway covers require separately specified base raceway covers for power and communication port locations other than the standard powered base raceway cover. • New York City (NYC) electrical applications require field installation of PDA. • New York Port Authority (NYPA) electrical applications require metal raceway covers. To order, specify NYC powered panels without raceway cover and separately specify metal covers through Haworth e-Parts. • Some building codes may restrict the use of panel heights greater than 69 ′′(1753mm). Consult your local code authority to assure that the furniture layout is compliant. • For International Power, specify non-powered panels and use Power Logic components. See Specification Guide for more information on Power Logic. • For Chicago power, specify non-powered panels without a base raceway cover and separately specify Chicago power retrofit kit.

82

April 2008 / USA

Class DA – GSA: Open Market Canadian Conversion Factor: Refer to haworth.com/Canada

UniGroup Too Price List

Monolithic Wood Panel with Low Profile Wood Top Cap PLACES Actual Height Wood

30′′(762mm)

37′′(940mm)

44′′(1118mm)

50′′(1270mm)

56′′(1422mm)

64′′(1626mm)

68′′(1727mm)

82′′(2083mm)

Width

Non-Powered Number

Wood Finish Group I II

12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm)

HWN-1230- T HWN-1830- T HWN-2430- T HWN-3030- T HWN-3630- T HWN-4230- T HWN-4830- T HWN-1237- T HWN-1837- T HWN-2437- T HWN-3037- T HWN-3637- T HWN-4237- T HWN-4837- T HWN-1244- T HWN-1844- T HWN-2444- T HWN-3044- T HWN-3644- T HWN-4244- T HWN-4844- T HWN-1250- T HWN-1850- T HWN-2450- T HWN-3050- T HWN-3650- T HWN-4250- T HWN-4850- T HWN-1256- T HWN-1856- T HWN-2456- T HWN-3056- T HWN-3656- T HWN-4256- T HWN-4856- T HWN-1264- T HWN-1864- T HWN-2464- T HWN-3064- T HWN-3664- T HWN-4264- T HWN-4864- T HWN-1268- T HWN-1868- T HWN-2468- T HWN-3068- T HWN-3668- T HWN-4268- T HWN-4868- T HWN-1282- T HWN-1882- T HWN-2482- T HWN-3082- T HWN-3682- T HWN-4282- T HWN-4882- T

$ 771 863 950 1087 1173 1295 1399 $ 811 914 1004 1133 1240 1365 1458 $ 858 969 1052 1181 1270 1393 1487 $ 895 1018 1102 1230 1338 1468 1569 $ 932 1066 1136 1275 1408 1536 1721 $ 970 1113 1161 1321 1472 1602 1700 $1035 1190 1253 1420 1581 1714 1825 $1178 1418 1532 1738 1941 2114 2248

$ 784 877 963 1102 1188 1310 1417 $ 824 928 1020 1152 1259 1384 1481 $ 869 982 1069 1195 1289 1419 1510 $ 910 1036 1118 1249 1358 1490 1595 $ 943 1078 1153 1299 1432 1563 1748 $ 983 1131 1184 1344 1494 1627 1727 $1054 1206 1272 1443 1607 1744 1862 $1197 1437 1555 1766 1973 2147 2287

Product marked with this symbol available as GSA open market.

Class DA – GSA: Open Market Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

83

UniGroup Too Price List

Monolithic Wood/Fabric Panel with Low Profile Wood Top Cap PLACES

Wood/Fabric

Features

Specification Tips

• Includes non-powered or powered panel assembly, low profile top cap with aligner, with or without one-piece base raceway cover, 1.6 hinge kits, side trim rails, leveling glides and carpet gripper; power distribution assembly/flex connector(s) when power is specified. .6 base raceway end caps are shipped with each panel. Order additional as necessary. • Panel thickness is 2′′(51mm). • Base raceway is 4′′(102mm) high. • Powered raceway with or without raceway cover requires modified catalog number and list price. • Powered panels are available for countries that utilize 120 volt 60 hertz electrical systems and U.S. configured plugs and outlets. • Shipped with unassembled top cap, base raceway cover and side trim rails.

• Wood top cap panels require finish posts, including end conditions and variable height conditions. • Panels will accept add-on panels up to a combined height of 82″(2083mm). For aesthetic consistency, specify PLACES add-on panels. • Flex connectors provided for powered monolithic panels accommodate straight in-line, inside 90°, and inside 120° conditions (if applicable). • Receptacles for powered panels must be specified separately. • Raceway cover must be separately specified for option -E (no raceway cover).

To Order, Specify: 1) Product number. 2) Wood finish color for panel side one. 3) Fabric/colorway for panel side two.

HWFN-T (Non Powered)

C

R

4) Trim color for raceway cover, glide housings, end caps and side trim rails.

HWFP-T (3-Circuit Powered) HWFP-T6 (6-Circuit Powered)

5) Wood finish color for top cap.

US

NOTE: This panel has fabric/colorway restrictions, see systems fabrics/ color legend.

Non-Powered Panel with Base Raceway Cover, see opposite page. The following options require modification of the 3-Circuit Non-Powered (Example: HWFN-4864-T) product numbers and list prices shown on opposite page:

Panel Width

Non-Powered without Base Raceway Cover (Example: HWFN-4864-TE)

3-Circuit Powered (Example: HWFP-4864-T)

6-Circuit Powered (Example: HWFP-4864-T6)

or

or

NYC 3-Circuit Powered (Example: HWFP-4864-TY)

3-Circuit Powered without Base Raceway Cover (Example: HWFP-4864-TE)

6-Circuit Powered without Base Raceway Cover (Example: HWFP-4864-T6E)

or

or

NYC 6-Circuit Powered (Example: HWFP-4864-T6Y)

NYC 3-Circuit Powered without Base Raceway Cover (Example: HWFP-4864-TYE)

NYC 6-Circuit Powered without Base Raceway Cover (Example: HWFP-4864-T6YE)

Add:

Deduct:

Add:

Add:

Add:

12′′(305mm)

-$26

$155*

n/a

n/a

n/a

18′′(457mm)

-36

155

n/a

$107

n/a

24′′(610mm)

-44

155

$276

99

$220

30′′(762mm)

-46

155

276

96

217

36′′(914mm)

-50

155

276

87

208

42′′(1067mm)

-57

155

276

81

202

48′′(1219mm)

-60

155

276

75

196

*The 12 ′′-wide panel has a pass-through connector and a non-powered raceway cover.

NOTES: • Powered panels with raceway covers ship with receptacle ports in the base raceway cover. Receptacle ports on the raceway cover measure 2.35 ′′(60mm) top-to-bottom and 2.88 ′′(73mm) side-to-side. • Non-powered panels ship without receptacle ports in the base raceway cover. • Powered panels with Power Distribution Assemblies (PDA) but without raceway covers require separately specified base raceway covers for power and communication port locations other than the standard powered base raceway cover. • New York City (NYC) electrical applications require field installation of PDA. • New York Port Authority (NYPA) electrical applications require metal raceway covers. To order, specify NYC powered panels without raceway cover and separately specify metal covers through Haworth e-Parts. • Some building codes may restrict the use of panel heights greater than 69 ′′(1753mm). Consult your local code authority to assure that the furniture layout is compliant. • For International Power, specify non-powered panels and use Power Logic components. See Specification Guide for more information on Power Logic. • For Chicago power, specify non-powered panels without a base raceway cover and separately specify Chicago power retrofit kit.

84

April 2008 / USA

Class DA – GSA: Open Market Canadian Conversion Factor: Refer to haworth.com/Canada

UniGroup Too Price List

Monolithic Wood/Fabric Panel with Low Profile Wood Top Cap PLACES Actual Height Wood/Fabric

Wood Group I 30′′(762mm)

37′′(940mm)

44′′(1118mm)

50′′(1270mm)

56′′(1422mm)

64′′(1626mm)

68′′(1727mm)

82′′(2083mm)

Width

Non-Powered Number

Wood Group I Fabric Grade A B

12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm)

HWFN-1230- T HWFN-1830- T HWFN-2430- T HWFN-3030- T HWFN-3630- T HWFN-4230- T HWFN-4830- T HWFN-1237- T HWFN-1837- T HWFN-2437- T HWFN-3037- T HWFN-3637- T HWFN-4237- T HWFN-4837- T HWFN-1244- T HWFN-1844- T HWFN-2444- T HWFN-3044- T HWFN-3644- T HWFN-4244- T HWFN-4844- T HWFN-1250- T HWFN-1850- T HWFN-2450- T HWFN-3050- T HWFN-3650- T HWFN-4250- T HWFN-4850- T HWFN-1256- T HWFN-1856- T HWFN-2456- T HWFN-3056- T HWFN-3656- T HWFN-4256- T HWFN-4856- T HWFN-1264- T HWFN-1864- T HWFN-2464- T HWFN-3064- T HWFN-3664- T HWFN-4264- T HWFN-4864- T HWFN-1268- T HWFN-1868- T HWFN-2468- T HWFN-3068- T HWFN-3668- T HWFN-4268- T HWFN-4868- T HWFN-1282- T HWFN-1882- T HWFN-2482- T HWFN-3082- T HWFN-3682- T HWFN-4282- T HWFN-4882- T

$ 639 710 776 896 956 1058 1125 $ 671 753 824 931 1009 1115 1183 $ 706 793 858 966 1026 1131 1201 $ 734 835 898 1000 1080 1181 1263 $ 744 852 900 1015 1102 1206 1392 $ 789 904 937 1066 1178 1282 1358 $ 843 967 1009 1144 1264 1375 1453 $ 957 1158 1249 1414 1575 1709 1812

$ 657 728 794 914 981 1083 1150 $ 689 771 842 949 1034 1140 1208 $ 724 811 876 984 1051 1156 1226 $ 752 853 916 1018 1105 1206 1288 $ 763 871 919 1034 1128 1232 1418 $ 809 924 957 1086 1205 1309 1385 $ 863 987 1029 1164 1291 1402 1480 $ 977 1178 1269 1434 1602 1736 1839

C

D

E

F

G

$ 686 757 823 943 1018 1120 1187 $ 718 800 871 978 1071 1177 1245 $ 753 840 905 1013 1088 1193 1263 $ 781 882 945 1047 1142 1243 1325 $ 793 901 949 1064 1166 1270 1456 $ 840 955 988 1117 1244 1348 1424 $ 894 1018 1060 1195 1330 1441 1519 $1008 1209 1300 1465 1641 1775 1878

$ 710 781 847 967 1046 1148 1215 $ 742 824 895 1002 1099 1205 1273 $ 777 864 929 1037 1116 1221 1291 $ 805 906 969 1071 1170 1271 1353 $ 819 927 975 1090 1200 1304 1490 $ 868 983 1016 1145 1284 1388 1464 $ 922 1046 1088 1223 1370 1481 1559 $1036 1237 1328 1493 1681 1815 1918

$ 717 788 854 974 1052 1154 1221 $ 749 831 902 1009 1105 1211 1279 $ 784 871 936 1044 1122 1227 1297 $ 812 913 976 1078 1175 1276 1358 $ 827 935 983 1098 1210 1314 1500 $ 873 988 1021 1150 1293 1404 1480 $ 927 1051 1093 1228 1393 1504 1582 $1041 1242 1333 1498 1730 1864 1967

$ 722 793 859 979 1058 1160 1227 $ 754 836 907 1014 1111 1217 1285 $ 789 876 941 1049 1135 1240 1310 $ 817 918 981 1083 1189 1306 1388 $ 835 943 991 1106 1221 1346 1532 $ 878 993 1026 1155 1303 1441 1517 $ 932 1056 1098 1233 1433 1544 1622 $1046 1247 1351 1516 1779 1913 2016

$ 727 798 864 984 1063 1165 1232 $ 759 841 912 1019 1123 1229 1297 $ 794 881 946 1054 1161 1266 1336 $ 822 923 986 1088 1215 1335 1417 $ 839 950 998 1113 1249 1380 1566 $ 884 999 1037 1166 1332 1480 1556 $ 938 1062 1114 1249 1475 1586 1664 $1052 1253 1376 1541 1829 1963 2066

Product marked with this symbol available as GSA open market. Class DA – GSA: Open Market Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

85

UniGroup Too Price List

Monolithic Wood/Fabric Panel with Low Profile Wood Top Cap PLACES Actual Height Wood/Fabric

Width

Wood Group II 30′′(762mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 37′′(940mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 44′′(1118mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 50′′(1270mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 56′′(1422mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 64′′(1626mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 68′′(1727mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 82′′(2083mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm)

Non-Powered Number

Wood Group II Fabric Grade A B C

D

E

F

G

HWFN-1230- T HWFN-1830- T HWFN-2430- T HWFN-3030- T HWFN-3630- T HWFN-4230- T HWFN-4830- T HWFN-1237- T HWFN-1837- T HWFN-2437- T HWFN-3037- T HWFN-3637- T HWFN-4237- T HWFN-4837- T HWFN-1244- T HWFN-1844- T HWFN-2444- T HWFN-3044- T HWFN-3644- T HWFN-4244- T HWFN-4844- T HWFN-1250- T HWFN-1850- T HWFN-2450- T HWFN-3050- T HWFN-3650- T HWFN-4250- T HWFN-4850- T HWFN-1256- T HWFN-1856- T HWFN-2456- T HWFN-3056- T HWFN-3656- T HWFN-4256- T HWFN-4856- T HWFN-1264- T HWFN-1864- T HWFN-2464- T HWFN-3064- T HWFN-3664- T HWFN-4264- T HWFN-4864- T HWFN-1268- T HWFN-1868- T HWFN-2468- T HWFN-3068- T HWFN-3668- T HWFN-4268- T HWFN-4868- T HWFN-1282- T HWFN-1882- T HWFN-2482- T HWFN-3082- T HWFN-3682- T HWFN-4282- T HWFN-4882- T

$ 646 719 782 904 963 1067 1132 $ 676 758 830 938 1018 1123 1196 $ 710 800 868 973 1036 1139 1211 $ 743 840 903 1010 1088 1193 1276 $ 749 858 911 1025 1111 1217 1403 $ 796 914 946 1079 1191 1298 1370 $ 849 975 1019 1153 1276 1387 1468 $ 967 1166 1259 1425 1587 1725 1831

$ 717 790 853 975 1053 1157 1222 $ 747 829 901 1009 1108 1213 1286 $ 781 871 939 1044 1126 1229 1301 $ 814 911 974 1081 1178 1283 1366 $ 824 933 986 1100 1209 1315 1501 $ 875 993 1025 1158 1297 1404 1476 $ 928 1054 1098 1232 1382 1493 1574 $1046 1245 1338 1504 1693 1831 1937

$ 724 797 860 982 1059 1163 1228 $ 754 836 908 1016 1114 1219 1292 $ 788 878 946 1051 1132 1235 1307 $ 821 918 981 1088 1183 1288 1371 $ 832 941 994 1108 1219 1325 1511 $ 880 998 1030 1163 1306 1420 1492 $ 933 1059 1103 1237 1405 1516 1597 $1051 1250 1343 1509 1742 1880 1986

$ 729 802 865 987 1065 1169 1234 $ 759 841 913 1021 1120 1225 1298 $ 793 883 951 1056 1145 1248 1320 $ 826 923 986 1093 1197 1318 1401 $ 840 949 1002 1116 1230 1357 1543 $ 885 1003 1035 1168 1316 1457 1529 $ 938 1064 1108 1242 1445 1556 1637 $1056 1255 1361 1527 1791 1929 2035

$ 734 807 870 992 1070 1174 1239 $ 764 846 918 1026 1132 1237 1310 $ 798 888 956 1061 1171 1274 1346 $ 831 928 991 1098 1223 1347 1430 $ 844 956 1009 1123 1258 1391 1577 $ 891 1009 1046 1179 1345 1496 1568 $ 944 1070 1124 1258 1487 1598 1679 $1062 1261 1386 1552 1841 1979 2085

$ 664 737 800 922 988 1092 1157 $ 694 776 848 956 1043 1148 1221 $ 728 818 886 991 1061 1164 1236 $ 761 858 921 1028 1113 1218 1301 $ 768 877 930 1044 1137 1243 1429 $ 816 934 966 1099 1218 1325 1397 $ 869 995 1039 1173 1303 1414 1495 $ 987 1186 1279 1445 1614 1752 1858

Product marked with this symbol available as GSA open market.

86

April 2008 / USA

Class DA – GSA: Open Market Canadian Conversion Factor: Refer to haworth.com/Canada

$ 693 766 829 951 1025 1129 1194 $ 723 805 877 985 1080 1185 1258 $ 757 847 915 1020 1098 1201 1273 $ 790 887 950 1057 1150 1255 1338 $ 798 907 960 1074 1175 1281 1467 $ 847 965 997 1130 1257 1364 1436 $ 900 1026 1070 1204 1342 1453 1534 $1018 1217 1310 1476 1653 1791 1897

UniGroup Too Price List

This page intentionally blank

April 2008 / USA

87

UniGroup Too Price List

Monolithic Fabric Panel with Low Profile Wood Top Cap PLACES

Fabric

HFN-T (Non Powered)

C

R

HFP-T (3-Circuit Powered) HFP-T6 (6-Circuit Powered)

Features

Specification Tips

• Includes non-powered or powered panel assembly, low profile top cap with aligner, with or without one-piece base raceway cover, 1.6 hinge kits, side trim rails, leveling glides and carpet gripper; power distribution assembly/flex connector(s) when power is specified. .6 base raceway end caps are shipped with each panel. Order additional as necessary. • Acoustical panel surfaces. • Panel surfaces may have the same fabric on both sides or a different fabric on each side. • Panel thickness is 2′′(51mm). • Base raceway is 4′′(102mm) high. • Powered raceway with or without raceway cover requires modified catalog number and list price. • Powered panels are available for countries that utilize 120 volt 60 hertz electrical systems and U.S. configured plugs and outlets. • Shipped with unassembled top cap, base raceway cover and side trim rails.

• Wood top cap panels require finish posts, including end conditions and variable height conditions. • For mixed fabric surfaces, price at higher fabric grade. • Panels will accept add-on panels up to a combined height of 82″(2083mm). For aesthetic consistency, specify PLACES add-on panels. • Flex connectors provided for powered monolithic panels accommodate straight in-line, inside 90°, and inside 120° conditions (if applicable). • Receptacles for powered panels must be specified separately. • Raceway cover must be separately specified for option -E (no raceway cover).

To Order, Specify: 1) Product number. 2) Fabric/colorway for panel side one. 3) Fabric/colorway for panel side two.

US

4) Trim color for raceway cover, glide housings, end caps and side trim rails.

NOTE:

5) Wood finish color for top cap.

This panel has fabric/colorway restrictions, see systems fabrics/ color legend.

Non-Powered Panel with Base Raceway Cover, see opposite page. The following options require modification of the 3-Circuit Non-Powered (Example: HFN-4864-T) product numbers and list prices shown on opposite page:

Panel Width

Non-Powered without Base Raceway Cover (Example: HFN-4864-TE)

3-Circuit Powered (Example: HFP-4864-T)

6-Circuit Powered (Example: HFP-4864-T6)

or

or

NYC 3-Circuit Powered (Example: HFP-4864-TY)

3-Circuit Powered without Base Raceway Cover (Example: HFP-4864-TE)

6-Circuit Powered without Base Raceway Cover (Example: HFP-4864-T6E)

or

or

NYC 6-Circuit Powered (Example: HFP-4864-T6Y)

NYC 3-Circuit Powered without Base Raceway Cover (Example: HFP-4864-TYE)

NYC 6-Circuit Powered without Base Raceway Cover (Example: HFP-4864-T6YE)

Add:

Deduct:

Add:

Add:

Add:

12′′(305mm)

-$26

$155*

n/a

n/a

n/a

18′′(457mm)

-36

155

n/a

$107

n/a

24′′(610mm)

-44

155

$276

99

$220

30′′(762mm)

-46

155

276

96

217

36′′(914mm)

-50

155

276

87

208

42′′(1067mm)

-57

155

276

81

202

48′′(1219mm)

-60

155

276

75

196

54′′(1372mm)

-63

155

276

69

190

60′′(1524mm)

-69

155

276

63

184

*The 12 ′′-wide panel has a pass-through connector and a non-powered raceway cover.

NOTES: • Powered panels with raceway covers ship with receptacle ports in the base raceway cover. Receptacle ports on the raceway cover measure 2.35 ′′(60mm) top-to-bottom and 2.88 ′′(73mm) side-to-side. • Non-powered panels ship without receptacle ports in the base raceway cover. • Powered panels with Power Distribution Assemblies (PDA) but without raceway covers require separately specified base raceway covers for power and communication port locations other than the standard powered base raceway cover. • New York City (NYC) electrical applications require field installation of PDA. • New York Port Authority (NYPA) electrical applications require metal raceway covers. To order, specify NYC powered panels without raceway cover and separately specify metal covers through Haworth e-Parts. • Some building codes may restrict the use of panel heights greater than 69 ′′(1753mm). Consult your local code authority to assure that the furniture layout is compliant. • For International Power, specify non-powered panels and use Power Logic components. See Specification Guide for more information on Power Logic. • For Chicago power, specify non-powered panels without a base raceway cover and separately specify Chicago power retrofit kit.

88

April 2008 / USA

Class BA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

UniGroup Too Price List

Monolithic Fabric Panel with Low Profile Wood Top Cap PLACES Actual Height Fabric

30′′(762mm)

37′′(940mm)

44′′(1118mm)

50′′(1270mm)

56′′(1422mm)

64′′(1626mm)

68′′(1727mm)

82′′(2083mm)

Width

Non-Powered Number

Fabric Grade A B

C

D

E

F

G

12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′((1372mm) 60′′(1524mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm)

HFN-1230- T HFN-1830- T HFN-2430- T HFN-3030- T HFN-3630- T HFN-4230- T HFN-4830- T HFN-5430- T HFN-6030- T HFN-1237- T HFN-1837- T HFN-2437- T HFN-3037- T HFN-3637- T HFN-4237- T HFN-4837- T HFN-5437- T HFN-6037- T HFN-1244- T HFN-1844- T HFN-2444- T HFN-3044- T HFN-3644- T HFN-4244- T HFN-4844- T HFN-5444- T HFN-6044- T HFN-1250- T HFN-1850- T HFN-2450- T HFN-3050- T HFN-3650- T HFN-4250- T HFN-4850- T HFN-5450- T HFN-6050- T HFN-1256- T HFN-1856- T HFN-2456- T HFN-3056- T HFN-3656- T HFN-4256- T HFN-4856- T HFN-5456- T HFN-6056- T HFN-1264- T HFN-1864- T HFN-2464- T HFN-3064- T HFN-3664- T HFN-4264- T HFN-4864- T HFN-5464- T HFN-6064- T HFN-1268- T HFN-1868- T HFN-2468- T HFN-3068- T HFN-3668- T HFN-4268- T HFN-4868- T HFN-5468- T HFN-6068- T HFN-1282- T HFN-1882- T HFN-2482- T HFN-3082- T HFN-3682- T HFN-4282- T HFN-4882- T HFN-5482- T HFN-6082- T

$ 527 581 633 730 772 850 902 965 1026 $ 551 612 667 756 813 892 949 1007 1074 $ 577 644 693 780 817 898 954 1014 1083 $ 599 673 717 801 855 935 995 1065 1144 $ 616 700 729 823 890 971 1029 1108 1194 $ 636 728 741 843 926 1004 1061 1150 1240 $ 678 772 796 902 991 1076 1134 1220 1319 $ 771 934 997 1131 1253 1361 1435 1516 1605

$ 615 669 721 818 884 962 1014 1077 1138 $ 639 700 755 844 925 1004 1061 1119 1186 $ 665 732 781 868 929 1010 1066 1126 1195 $ 687 761 805 889 967 1047 1107 1177 1256 $ 708 792 821 915 1008 1089 1147 1226 1312 $ 732 824 837 939 1048 1126 1183 1272 1362 $ 774 868 892 998 1113 1198 1256 1342 1441 $ 867 1030 1093 1227 1375 1483 1557 1638 1727

$ 659 713 765 862 938 1016 1068 1131 1192 $ 683 744 799 888 979 1058 1115 1173 1240 $ 709 776 825 912 983 1064 1120 1180 1249 $ 731 805 849 933 1021 1101 1161 1231 1310 $ 754 838 867 961 1070 1151 1209 1288 1374 $ 780 872 885 987 1120 1198 1255 1344 1434 $ 822 916 940 1046 1185 1270 1328 1414 1513 $ 915 1078 1141 1275 1447 1555 1629 1710 1799

$ 669 723 775 872 948 1026 1078 1141 1202 $ 693 754 809 898 989 1068 1125 1183 1250 $ 719 786 835 922 985 1066 1122 1182 1251 $ 741 815 859 943 1045 1125 1185 1255 1334 $ 766 850 879 973 1104 1185 1243 1322 1408 $ 794 886 899 1001 1172 1250 1307 1396 1486 $ 836 930 954 1060 1249 1334 1392 1478 1577 $ 929 1092 1155 1289 1565 1673 1747 1828 1917

$ 683 737 789 886 958 1036 1088 1151 1212 $ 707 768 823 912 999 1078 1135 1193 1260 $ 733 800 849 936 1035 1116 1172 1232 1301 $ 755 829 873 957 1105 1185 1245 1315 1394 $ 778 862 891 985 1170 1251 1309 1388 1474 $ 804 896 909 1011 1244 1322 1379 1468 1558 $ 846 940 964 1070 1329 1414 1472 1558 1657 $ 939 1102 1203 1337 1661 1769 1843 1924 2013

$ 693 747 799 896 972 1050 1102 1165 1226 $ 717 778 833 922 1041 1120 1177 1235 1302 $ 743 810 859 946 1087 1168 1224 1284 1353 $ 765 839 883 967 1165 1245 1305 1375 1454 $ 790 874 903 997 1238 1319 1377 1456 1542 $ 814 906 941 1043 1322 1400 1457 1546 1636 $ 856 950 996 1102 1413 1498 1556 1642 1741 $ 949 1112 1245 1385 1763 1871 1945 2026 2115

$ 561 615 667 764 818 896 948 1011 1072 $ 585 646 701 790 859 938 995 1053 1120 $ 611 678 727 814 863 944 1000 1060 1129 $ 633 707 751 835 901 981 1041 1111 1190 $ 652 736 765 859 938 1019 1077 1156 1242 $ 674 766 779 881 976 1054 1111 1200 1290 $ 716 810 834 940 1041 1126 1184 1270 1369 $ 809 972 1035 1169 1303 1411 1485 1566 1655

Class BA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

89

UniGroup Too Price List

Basic Monolithic Fabric Panel with Low Profile Wood Top Cap PLACES

Fabric

HMN-T (Non Powered)

C

R

HMP-T (3-Circuit Powered) HMP-T6 (6-Circuit Powered)

Features

Specification Tips

• Includes non-powered or powered panel assembly, low profile top cap with aligner, with or without one-piece base raceway cover, 1.6 hinge kits, side trim rails, leveling glides and carpet gripper; power distribution assembly/flex connector(s) when power is specified. .6 base raceway end caps are shipped with each panel. Order additional as necessary. • Acoustical panel surfaces. • Panel surfaces may have the same fabric on both sides or a different fabric on each side. • Panel thickness is 2′′(51mm). • Base raceway is 4′′(102mm) high. • Powered raceway with or without raceway cover requires modified catalog number and list price. • Powered panels are available for countries that utilize 120 volt 60 hertz electrical systems and U.S. configured plugs and outlets. • Shipped with unassembled top cap, base raceway cover and side trim rails.

• Wood top cap panels require finish posts, including end conditions and variable height conditions. • For mixed fabric surfaces, price at higher fabric grade. • Panels will accept add-on panels up to a combined height of 82″(2083mm). For aesthetic consistency, specify PLACES add-on panels. • Flex connectors provided for powered monolithic panels accommodate straight in-line, inside 90°, and inside 120° conditions (if applicable). • Receptacles for powered panels must be specified separately. • Raceway cover must be separately specified for option -E (no raceway cover).

To Order, Specify: 1) Product number. 2) Fabric/colorway for panel side one. 3) Fabric/colorway for panel side two.

US

4) Trim color for raceway cover, glide housings, end caps and side trim rails.

NOTE:

5) Wood finish color for top cap.

This panel has fabric/colorway restrictions, see systems fabrics/ color legend.

Non-Powered Panel with Base Raceway Cover, see opposite page. The following options require modification of the 3-Circuit Non-Powered (Example: HMN-4864-T) product numbers and list prices shown on opposite page:

Panel Width

Non-Powered without Base Raceway Cover (Example: HMN-4864-TE)

3-Circuit Powered (Example: HMP-4864-T)

6-Circuit Powered (Example: HMP-4864-T6)

or

or

NYC 3-Circuit Powered (Example: HMP-4864-TY)

3-Circuit Powered without Base Raceway Cover (Example: HMP-4864-TE)

6-Circuit Powered without Base Raceway Cover (Example: HMP-4864-T6E)

or

or

NYC 6-Circuit Powered (Example: HMP-4864-T6Y)

NYC 3-Circuit Powered without Base Raceway Cover (Example: HMP-4864-TYE)

NYC 6-Circuit Powered without Base Raceway Cover (Example: E2MP-462-TYE)

Add:

Deduct:

Add:

Add:

Add:

12′′(305mm)

-$26

$155*

n/a

n/a

n/a

18′′(457mm)

-36

155

n/a

$107

n/a

24′′(610mm)

-44

155

$276

99

$220

30′′(762mm)

-46

155

276

96

217

36′′(914mm)

-50

155

276

87

208

42′′(1067mm)

-57

155

276

81

202

48′′(1219mm)

-60

155

276

75

196

54′′(1372mm)

-63

155

276

69

190

60′′(1524mm)

-69

155

276

63

184

*The 12 ′′-wide panel has a pass-through connector and a non-powered raceway cover.

NOTES: • Powered panels with raceway covers ship with receptacle ports in the base raceway cover. Receptacle ports on the raceway cover measure 2.35 ′′(60mm) top-to-bottom and 2.88 ′′(73mm) side-to-side. • Non-powered panels ship without receptacle ports in the base raceway cover. • Powered panels with Power Distribution Assemblies (PDA) but without raceway covers require separately specified base raceway covers for power and communication port locations other than the standard powered base raceway cover. • New York City (NYC) electrical applications require field installation of PDA. • New York Port Authority (NYPA) electrical applications require metal raceway covers. To order, specify NYC powered panels without raceway cover and separately specify metal covers through Haworth e-Parts. • Some building codes may restrict the use of panel heights greater than 69 ′′(1753mm). Consult your local code authority to assure that the furniture layout is compliant. • For International Power, specify non-powered panels and use Power Logic components. See Specification Guide for more information on Power Logic. • For Chicago power, specify non-powered panels without a base raceway cover and separately specify Chicago power retrofit kit.

90

April 2008 / USA

Class BA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

UniGroup Too Price List

Basic Monolithic Fabric Panel with Low Profile Wood Top Cap PLACES Actual Height Fabric

30′′(762mm)

37′′(940mm)

44′′(1118mm)

50′′(1270mm)

56′′(1422mm)

64′′(1626mm)

68′′(1727mm)

82′′(2083mm)

Width

Non-Powered Number

Fabric Grade A B

C

D

E

F

G

12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′((1372mm) 60′′(1524mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm)

HMN-1230- T HMN-1830- T HMN-2430- T HMN-3030- T HMN-3630- T HMN-4230- T HMN-4830- T HMN-5430- T HMN-6030- T HMN-1237- T HMN-1837- T HMN-2437- T HMN-3037- T HMN-3637- T HMN-4237- T HMN-4837- T HMN-5437- T HMN-6037- T HMN-1244- T HMN-1844- T HMN-2444- T HMN-3044- T HMN-3644- T HMN-4244- T HMN-4844- T HMN-5444- T HMN-6044- T HMN-1250- T HMN-1850- T HMN-2450- T HMN-3050- T HMN-3650- T HMN-4250- T HMN-4850- T HMN-5450- T HMN-6050- T HMN-1256- T HMN-1856- T HMN-2456- T HMN-3056- T HMN-3656- T HMN-4256- T HMN-4856- T HMN-5456- T HMN-6056- T HMN-1264- T HMN-1864- T HMN-2464- T HMN-3064- T HMN-3664- T HMN-4264- T HMN-4864- T HMN-5464- T HMN-6064- T HMN-1268- T HMN-1868- T HMN-2468- T HMN-3068- T HMN-3668- T HMN-4268- T HMN-4868- T HMN-5468- T HMN-6068- T HMN-1282- T HMN-1882- T HMN-2482- T HMN-3082- T HMN-3682- T HMN-4282- T HMN-4882- T HMN-5482- T HMN-6082- T

$ 438 484 528 610 641 708 752 803 852 $ 460 510 557 627 673 743 790 839 894 $ 481 536 578 650 681 746 794 844 899 $ 497 564 601 667 709 778 829 887 954 $ 513 585 609 685 740 807 855 920 993 $ 528 606 617 701 771 835 884 955 1032 $ 566 644 663 750 824 897 944 1017 1100 $ 644 782 832 942 1044 1133 1200 1264 1339

$ 526 572 616 698 753 820 864 915 964 $ 548 598 645 715 785 855 902 951 1006 $ 569 624 666 738 793 858 906 956 1011 $ 585 652 689 755 821 890 941 999 1066 $ 605 677 701 777 858 925 973 1038 1111 $ 624 702 713 797 893 957 1006 1077 1154 $ 662 740 759 846 946 1019 1066 1139 1222 $ 740 878 928 1038 1166 1255 1322 1386 1461

$ 570 616 660 742 807 874 918 969 1018 $ 592 642 689 759 839 909 956 1005 1060 $ 613 668 710 782 847 912 960 1010 1065 $ 629 696 733 799 875 944 995 1053 1120 $ 651 723 747 823 920 987 1035 1100 1173 $ 672 750 761 845 965 1029 1078 1149 1226 $ 710 788 807 894 1018 1091 1138 1211 1294 $ 788 926 976 1086 1238 1327 1394 1458 1533

$ 580 626 670 746 817 884 928 979 1028 $ 602 652 699 769 849 919 966 1015 $1070 623 678 720 792 865 930 978 1028 1083 $ 639 706 743 809 899 968 1019 1077 1144 $ 663 735 759 835 952 1019 1067 1132 1205 $ 686 764 775 859 1015 1079 1128 1199 1276 $ 724 802 821 908 1082 1155 1202 1275 1358 $ 802 940 988 1098 1356 1445 1512 1576 1651

$ 594 640 684 766 827 894 938 989 1038 $ 616 666 713 783 859 929 976 1025 $1080 637 692 734 806 899 964 1012 1062 1117 $ 653 720 757 823 957 1026 1077 1135 1202 $ 675 747 771 847 1020 1087 1135 1200 1273 $ 696 774 785 869 1089 1153 1202 1273 1350 $ 734 812 831 918 1162 1235 1282 1355 1438 $ 812 950 1036 1146 1452 1541 1608 1672 1747

$ 604 650 694 776 841 908 952 1003 1052 $ 626 676 723 793 901 971 1018 1067 $1122 647 702 744 816 951 1016 1064 1114 1169 $ 663 730 767 833 1019 1088 1139 1197 1264 $ 687 759 783 859 1086 1153 1201 1266 1339 $ 706 784 817 901 1167 1231 1280 1351 1428 $ 744 822 863 950 1246 1319 1366 1439 1522 $ 822 960 1086 1196 1552 1641 1708 1772 1847

$ 472 518 562 644 687 754 798 849 898 $ 494 544 591 661 719 789 836 885 940 $ 515 570 612 684 727 792 840 890 945 $ 531 598 635 701 755 824 875 933 1000 $ 549 621 645 721 788 855 903 968 1041 $ 566 644 655 739 821 885 934 1005 1082 $ 604 682 701 788 874 947 994 1067 1150 $ 682 820 870 980 1094 1183 1250 1314 1389

Class BA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

91

UniGroup Too Price List

Ported Monolithic Fabric Panel with Low Profile Wood Top Cap PLACES

Fabric Ported — One Port Right or Left

HFP-RT (3-Circuit Powered — Right Port)

C

R

HFP-LT (3-Circuit Powered— Left Port)

US

NOTE: This panel has fabric/colorway restrictions, see systems fabrics/ color legend.

Features

Specification Tips

• Includes powered panel assembly, low profile top cap with aligner, with or without one-piece base raceway cover, 1.6 hinge kits, side trim rails, leveling glides and carpet gripper; power distribution assembly/flex connector(s). .6 base raceway end caps are shipped with each panel. Order additional as necessary. • Acoustical panel surfaces. • Panel surfaces may have the same fabric on both sides or a different fabric on each side. • Panel thickness is 2′′(51mm). • Base raceway is 4′′(102mm) high. • Powered raceway with or without raceway cover requires modified catalog number and list price. • Powered panels are available for countries that utilize 120 volt 60 hertz electrical systems and U.S. configured plugs and outlets. • Shipped with unassembled top cap, base raceway cover and side trim rails. • Concealed 2′′(51mm) deep top raceway to store and route communication cables. • Cables are routed downward to ported opening above worksurface through internal, vertical panel frame rail. • Ported panels are only available as 3-circuit powered (both port location and base). Chicago and New York applications require modification of product number, see below. • Factory installed electrical power is routed upward to the ported openings from the base raceway. • A metal barrier, located inside the ported opening, shields electrical wires from communication cables. • Port option may be limited in New York City, consult your local code authority prior to specifying.

• Wood top cap panels require finish posts, including end conditions and variable height conditions. • For mixed fabric surfaces, price at higher fabric grade. • Panels will accept add-on panels up to a combined height of 82″(2083mm). For aesthetic consistency, specify PLACES add-on panels. • Flex connectors provided for powered monolithic panels accommodate straight in-line, inside 90°, and inside 120° conditions (if applicable). • Receptacles for powered panels must be specified separately. • Raceway cover must be separately specified for option -E (no raceway cover). • When specifying two (2) colors, specify finish/color for the side with the port first. Then specify finish/color for the other side. • Ported panels require separate specification of port cover plates, see Specification Guide.

To Order, Specify: 1) Product number, including:

1 Port Specification: R Right-hand L

Left-hand

2) Fabric/colorway for panel side one (port side). 3) Fabric/colorway for panel side two. 4) Trim color for raceway cover, glide housings, end caps and side trim rails. 5) Wood finish color for top cap.

Powered Panel with Base Raceway Cover, see opposite page. The following options require modification of the 3-Circuit Powered (Example: HFP-4864-RT) product numbers and list prices shown on opposite page: 3-Circuit Powered without Base Raceway Cover (Example: HFP-4864-RTE) or

Panel Width

NYC 3-Circuit Powered (Example: HFP-4864-RTY)

NYC 3-Circuit Powered without Base Raceway Cover (Example: HFP-4864-RTYE)

Chicago Powered (Example: HFP-4864-RTC)

Add:

Deduct:

Deduct:

36′′(914mm)

—

-$68

-$155

42′′(1067mm)

—

-74

-155

48′′(1219mm)

—

-80

-155

54′′(1372mm)

—

-86

-155

60′′(1524mm)

—

-92

-155

NOTES: • Powered panels with raceway covers ship with receptacle ports in the base raceway cover. Receptacle ports on the raceway cover measure 2.35 ′′(60mm) top-to-bottom and 2.88 ′′(73mm) side-to-side. • Powered panels with Power Distribution Assemblies (PDA) but without raceway covers require separately specified base raceway covers for power and communication port locations other than the standard powered base raceway cover. • New York City (NYC) electrical applications require field installation of PDA. • New York Port Authority (NYPA) electrical applications require metal raceway covers. To order, specify NYC powered panels without raceway cover and separately specify metal covers through Haworth e-Parts. • Some building codes may restrict the use of panel heights greater than 69 ′′(1753mm). Consult your local code authority to assure that the furniture layout is compliant.

92

April 2008 / USA

Class BA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

UniGroup Too Price List

Ported Monolithic Fabric Panel with Low Profile Wood Top Cap PLACES Actual Height Fabric Ported — One Port Right or Left

50′′(1270mm)

64′′(1626mm)

68′′(1727mm)

82′′(2083mm)

Width

Powered Number 1

36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm)

HFP-3650HFP-4250HFP-4850HFP-5450HFP-6050HFP-3664HFP-4264HFP-4864HFP-5464HFP-6064HFP-3668HFP-4268HFP-4868HFP-5468HFP-6068HFP-3682HFP-4282HFP-4882HFP-5482HFP-6082-

T T T T T T T T T T T T T T T T T T T T

Fabric Grade A B

C

D

E

F

G

$1277 1357 1417 1487 1566 $1348 1426 1483 1572 1662 $1413 1498 1556 1642 1741 $1675 1783 1857 1938 2027

$1389 1469 1529 1599 1678 $1470 1548 1605 1694 1784 $1535 1620 1678 1764 1863 $1797 1905 1979 2060 2149

$1443 1523 1583 1653 1732 $1542 1620 1677 1766 1856 $1607 1692 1750 1836 1935 $1869 1977 2051 2132 2221

$1467 1547 1607 1677 1756 $1594 1672 1729 1818 1908 $1671 1756 1814 1900 1999 $1987 2095 2169 2250 2339

$1527 1607 1667 1737 1816 $1666 1744 1801 1890 1980 $1751 1836 1894 1980 2079 $2083 2191 2265 2346 2435

$1587 1667 1727 1797 1876 $1744 1822 1879 1968 2058 $1835 1920 1978 2064 2163 $2185 2293 2367 2646 2537

$1323 1403 1463 1533 1612 $1398 1476 1533 1622 1712 $1463 1548 1606 1692 1791 $1725 1833 1907 1988 2077

Class BA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

93

UniGroup Too Price List

Ported Monolithic Fabric Panel with Low Profile Wood Top Cap PLACES

Fabric Ported — One Port Each Side

HFP-1T (3-Circuit Powered) C

R

US

NOTES: Ports are back-to-back onthis panel. This panel has fabric/colorway restrictions, see systems fabrics/ color legend.

Features

Specification Tips

• Includes non-powered or powered panel assembly, low profile top cap with aligner, with or without one-piece base raceway cover, 1.6 hinge kits, side trim rails, leveling glides and carpet gripper; power distribution assembly/flex connector(s). .6 base raceway end caps are shipped with each panel. Order additional as necessary. • Acoustical panel surfaces. • Panel surfaces may have the same fabric on both sides or a different fabric on each side. • Panel thickness is 2′′(51mm). • Base raceway is 4′′(102mm) high. • Powered raceway with or without raceway cover requires modified catalog number and list price. • Powered panels are available for countries that utilize 120 volt 60 hertz electrical systems and U.S. configured plugs and outlets. • Shipped with unassembled top cap, base raceway cover and side trim rails. • Concealed 2′′(51mm) deep top raceway to store and route communication cables. • Cables are routed downward to ported opening above worksurface through internal, vertical panel frame rail. • Ported panels are only available as 3-circuit powered (both port location and base). Chicago and New York applications require modification of product number, see below. • Factory installed electrical power is routed upward to the ported openings from the base raceway. • A metal barrier, located inside the ported opening, shields electrical wires from communication cables. • Port option may be limited in New York City, consult your local code authority prior to specifying.

• Wood top cap panels require finish posts, including end conditions and variable height conditions. • For mixed fabric surfaces, price at higher fabric grade. • Panels will accept add-on panels up to a combined height of 82″(2083mm). For aesthetic consistency, specify PLACES add-on panels. • Flex connectors provided for powered monolithic panels accommodate straight in-line, inside 90°, and inside 120° conditions (if applicable). • Receptacles for powered panels must be specified separately. • Raceway cover must be separately specified for option -E (no raceway cover). • When specifying two (2) colors, specify finish/color for the side with the port in the right-hand position first. Then specify finish/color for the other side. • Ported panels require separate specification of port cover plates, see Specification Guide.

To Order, Specify: 1) Product number. 2) Fabric/colorway for panel side one (right-hand port side). 3) Fabric/colorway for panel side two. 4) Trim color for raceway cover, glide housings, end caps and side trim rails. 5) Wood finish color for top cap.

Powered Panel with Base Raceway Cover, see opposite page. The following options require modification of the 3-Circuit Powered (Example: HFP-4864-1T) product numbers and list prices shown on opposite page: 3-Circuit Powered without Base Raceway Cover (Example: HFP-4864-1TE) or

Panel Width

NYC 3-Circuit Powered (Example: HFP-4864-1TY)

NYC 3-Circuit Powered without Base Raceway Cover (Example: HFP-4864-1TYE)

Chicago Powered (Example: HFP-4864-1TC)

Add:

Deduct:

Deduct:

36′′(914mm)

—

-$68

-$155

42′′(1067mm)

—

-74

-155

48′′(1219mm)

—

-80

-155

54′′(1372mm)

—

-86

-155

60′′(1524mm)

—

-92

-155

NOTES: • Powered panels with raceway covers ship with receptacle ports in the base raceway cover. Receptacle ports on the raceway cover measure 2.35 ′′(60mm) top-to-bottom and 2.88 ′′(73mm) side-to-side. • Powered panels with Power Distribution Assemblies (PDA) but without raceway covers require separately specified base raceway covers for power and communication port locations other than the standard powered base raceway cover. • New York City (NYC) electrical applications require field installation of PDA. • New York Port Authority (NYPA) electrical applications require metal raceway covers. To order, specify NYC powered panels without raceway cover and separately specify metal covers through Haworth e-Parts. • Some building codes may restrict the use of panel heights greater than 69 ′′(1753mm). Consult your local code authority to assure that the furniture layout is compliant.

94

April 2008 / USA

Class BA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

UniGroup Too Price List

Ported Monolithic Fabric Panel with Low Profile Wood Top Cap PLACES Actual Height Fabric Ported — One Ported Each Side

50′′(1270mm)

64′′(1626mm)

68′′(1727mm)

82′′(2083mm)

Width

Powered Number

Fabric Grade A B

C

D

E

F

G

36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm)

HFP-3650-1 T HFP-4250-1 T HFP-4850-1 T HFP-5450-1 T HFP-6050-1 T HFP-3664-1 T HFP-4264-1 T HFP-4864-1 T HFP-5464-1 T HFP-6064-1 T HFP-3668-1 T HFP-4268-1 T HFP-4868-1 T HFP-5468-1 T HFP-6068-1 T HFP-3682-1 T HFP-4282-1 T HFP-4882-1 T HFP-5482-1 T HFP-6082-1 T

$1320 1400 1460 1530 1609 $1391 1469 1526 1615 1705 $1456 1541 1599 1685 1784 $1718 1826 1900 1981 2070

$1432 1512 1572 1642 1721 $1513 1591 1648 1737 1827 $1578 1663 1721 1807 1906 $1840 1948 2022 2103 2192

$1486 1566 1626 1696 1775 $1585 1663 1720 1809 1899 $1650 1735 1793 1879 1978 $1912 2020 2094 2175 2264

$1510 1590 1650 1720 1799 $1637 1715 1772 1861 1951 $1714 1799 1857 1943 2042 $2030 2138 2212 2293 2382

$1570 1650 1710 1780 1859 $1709 1787 1844 1933 2023 $1794 1879 1937 2023 2122 $2126 2234 2308 2389 2478

$1630 1710 1770 1840 1919 $1787 1865 1922 2011 2101 $1878 1963 2021 2107 2206 $2228 2336 2410 2689 2580

$1366 1446 1506 1576 1655 $1441 1519 1576 1665 1755 $1506 1591 1649 1735 1834 $1768 1876 1950 2031 2120

Class BA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

95

UniGroup Too Price List

Ported Monolithic Fabric Panel with Low Profile Wood Top Cap PLACES

Fabric Ported — Two Ports, Same Side

HFP-2T (3-Circuit Powered) C

R

US

NOTE: This panel has fabric/colorway restrictions, see systems fabrics/ color legend.

Features

Specification Tips

• Includes non-powered or powered panel assembly, low profile top cap with aligner, with or without one-piece base raceway cover, 1.6 hinge kits, side trim rails, leveling glides and carpet gripper; power distribution assembly/flex connector(s). .6 base raceway end caps are shipped with each panel. Order additional as necessary. • Acoustical panel surfaces. • Panel surfaces may have the same fabric on both sides or a different fabric on each side. • Panel thickness is 2′′(51mm). • Base raceway is 4′′(102mm) high. • Powered raceway with or without raceway cover requires modified catalog number and list price. • Powered panels are available for countries that utilize 120 volt 60 hertz electrical systems and U.S. configured plugs and outlets. • Shipped with unassembled top cap, base raceway cover and side trim rails. • Concealed 2′′(51mm) deep top raceway to store and route communication cables. • Cables are routed downward to ported opening above worksurface through internal, vertical panel frame rail. • Ported panels are only available as 3-circuit powered (both port location and base). Chicago and New York applications require modification of product number, see below. • Factory installed electrical power is routed upward to the ported openings from the base raceway. • A metal barrier, located inside the ported opening, shields electrical wires from communication cables. • Port option may be limited in New York City, consult your local code authority prior to specifying.

• Wood top cap panels require finish posts, including end conditions and variable height conditions. • For mixed fabric surfaces, price at higher fabric grade. • Panels will accept add-on panels up to a combined height of 82″(2083mm). For aesthetic consistency, specify PLACES add-on panels. • Flex connectors provided for powered monolithic panels accommodate straight in-line, inside 90°, and inside 120° conditions (if applicable). • Receptacles for powered panels must be specified separately. • Raceway cover must be separately specified for option -E (no raceway cover). • When specifying two (2) colors, specify finish/color for the side with the ports first. Then specify finish/color for the other side. • Ported panels require separate specification of port cover plates, see Specification Guide.

To Order, Specify: 1) Product number. 2) Fabric/colorway for panel side one (ported side). 3) Fabric/colorway for panel side two. 4) Trim color for raceway cover, glide housings, end caps and side trim rails. 5) Wood finish color for top cap.

Powered Panel with Base Raceway Cover, see opposite page. The following options require modification of the 3-Circuit Powered (Example: HFP-4864-2T) product numbers and list prices shown on opposite page: 3-Circuit Powered without Base Raceway Cover (Example: HFP-4864-2TE) or

Panel Width

NYC 3-Circuit Powered (Example: HFP-4864-2TY)

NYC 3-Circuit Powered without Base Raceway Cover (Example: HFP-4864-2TYE)

Chicago Powered (Example: HFP-4864-2TC)

Add:

Deduct:

Deduct:

36′′(914mm)

—

-$68

-$155

42′′(1067mm)

—

-74

-155

48′′(1219mm)

—

-80

-155

54′′(1372mm)

—

-86

-155

60′′(1524mm)

—

-92

-155

NOTES: • Powered panels with raceway covers ship with receptacle ports in the base raceway cover. Receptacle ports on the raceway cover measure 2.35 ′′(60mm) top-to-bottom and 2.88 ′′(73mm) side-to-side. • Powered panels with Power Distribution Assemblies (PDA) but without raceway covers require separately specified base raceway covers for power and communication port locations other than the standard powered base raceway cover. • New York City (NYC) electrical applications require field installation of PDA. • New York Port Authority (NYPA) electrical applications require metal raceway covers. To order, specify NYC powered panels without raceway cover and separately specify metal covers through Haworth e-Parts. • Some building codes may restrict the use of panel heights greater than 69 ′′(1753mm). Consult your local code authority to assure that the furniture layout is compliant.

96

April 2008 / USA

Class BA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

UniGroup Too Price List

Ported Monolithic Fabric Panel with Low Profile Wood Top Cap PLACES Actual Height Fabric Ported — Two Ports, Same Side

50′′(1270mm)

64′′(1626mm)

68′′(1727mm)

82′′(2083mm)

Width

Powered Number

Fabric Grade A B

C

D

E

F

G

36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm)

HFP-3650-2 T HFP-4250-2 T HFP-4850-2 T HFP-5450-2 T HFP-6050-2 T HFP-3664-2 T HFP-4264-2 T HFP-4864-2 T HFP-5464-2 T HFP-6064-2 T HFP-3668-2 T HFP-4268-2 T HFP-4868-2 T HFP-5468-2 T HFP-6068-2 T HFP-3682-2 T HFP-4282-2 T HFP-4882-2 T HFP-5482-2 T HFP-6082-2 T

$1337 1417 1477 1547 1626 $1408 1486 1543 1632 1722 $1473 1558 1616 1702 1801 $1735 1843 1917 1998 2087

$1449 1529 1589 1659 1738 $1530 1608 1665 1754 1844 $1595 1680 1738 1824 1923 $1857 1965 2039 2120 2209

$1503 1583 1643 1713 1792 $1602 1680 1737 1826 1916 $1667 1752 1810 1896 1995 $1929 2037 2111 2192 2281

$1527 1607 1667 1737 1816 $1654 1732 1789 1878 1968 $1731 1816 1874 1960 2059 $2047 2155 2229 2310 2399

$1587 1667 1727 1797 1876 $1726 1804 1861 1950 2040 $1811 1896 1954 2040 2139 $2143 2251 2325 2406 2495

$1647 1727 1787 1857 1936 $1804 1882 1939 2028 2118 $1895 1980 2038 2124 2223 $2245 2353 2427 2706 2597

$1383 1463 1523 1593 1672 $1458 1536 1593 1682 1772 $1523 1608 1666 1752 1851 $1785 1893 1967 2048 2137

Class BA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

97

UniGroup Too Price List

Ported Monolithic Fabric Panel with Low Profile Wood Top Cap PLACES

Fabric Ported — Four Ports, Two Each Side

HFP-4T (3-Circuit Powered) C

R

US

NOTES: Ports are back-to-back onthis panel. This panel has fabric/colorway restrictions, see systems fabrics/ color legend.

Features

Specification Tips

• Includes non-powered or powered panel assembly, low profile top cap with aligner, with or without one-piece base raceway cover, 1.6 hinge kits, side trim rails, leveling glides and carpet gripper; power distribution assembly/flex connector(s). .6 base raceway end caps are shipped with each panel. Order additional as necessary. • Acoustical panel surfaces. • Panel surfaces may have the same fabric on both sides or a different fabric on each side. • Panel thickness is 2′′(51mm). • Base raceway is 4′′(102mm) high. • Powered raceway with or without raceway cover requires modified catalog number and list price. • Powered panels are available for countries that utilize 120 volt 60 hertz electrical systems and U.S. configured plugs and outlets. • Shipped with unassembled top cap, base raceway cover and side trim rails. • Concealed 2′′(51mm) deep top raceway to store and route communication cables. • Cables are routed downward to ported opening above worksurface through internal, vertical panel frame rail. • Ported panels are only available as 3-circuit powered (both port location and base). Chicago and New York applications require modification of product number, see below. • Factory installed electrical power is routed upward to the ported openings from the base raceway. • A metal barrier, located inside the ported opening, shields electrical wires from communication cables. • Port option may be limited in New York City, consult your local code authority prior to specifying.

• Wood top cap panels require finish posts, including end conditions and variable height conditions. • For mixed fabric surfaces, price at higher fabric grade. • Panels will accept add-on panels up to a combined height of 82″(2083mm). For aesthetic consistency, specify PLACES add-on panels. • Flex connectors provided for powered monolithic panels accommodate straight in-line, inside 90°, and inside 120° conditions (if applicable). • Receptacles for powered panels must be specified separately. • Raceway cover must be separately specified for option -E (no raceway cover). • Ported panels require separate specification of port cover plates, see Specification Guide.

To Order, Specify: 1) Product number. 2) Fabric/colorway for panel side one. 3) Fabric/colorway for panel side two. 4) Trim color for raceway cover, glide housings, end caps and side trim rails. 5) Wood finish color for top cap.

Powered Panel with Base Raceway Cover, see opposite page. The following options require modification of the 3-Circuit Powered (Example: HFP-4864-4T) product numbers and list prices shown on opposite page: 3-Circuit Powered without Base Raceway Cover (Example: HFP-4864-4TE) or

Panel Width

NYC 3-Circuit Powered (Example: HFP-4864-4TY)

NYC 3-Circuit Powered without Base Raceway Cover (Example: HFP-4864-4TYE)

Chicago Powered (Example: HFP-4864-4TC)

Add:

Deduct:

Deduct:

36′′(914mm)

—

-$68

-$155

42′′(1067mm)

—

-74

-155

48′′(1219mm)

—

-80

-155

54′′(1372mm)

—

-86

-155

60′′(1524mm)

—

-92

-155

NOTES: • Powered panels with raceway covers ship with receptacle ports in the base raceway cover. Receptacle ports on the raceway cover measure 2.35 ′′(60mm) top-to-bottom and 2.88 ′′(73mm) side-to-side. • Powered panels with Power Distribution Assemblies (PDA) but without raceway covers require separately specified base raceway covers for power and communication port locations other than the standard powered base raceway cover. • New York City (NYC) electrical applications require field installation of PDA. • New York Port Authority (NYPA) electrical applications require metal raceway covers. To order, specify NYC powered panels without raceway cover and separately specify metal covers through Haworth e-Parts. • Some building codes may restrict the use of panel heights greater than 69 ′′(1753mm). Consult your local code authority to assure that the furniture layout is compliant.

98

April 2008 / USA

Class BA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

UniGroup Too Price List

Ported Monolithic Fabric Panel with Low Profile Wood Top Cap PLACES Actual Height Fabric Ported — Four Ports, Two Each Side

50′′(1270mm)

64′′(1626mm)

68′′(1727mm)

82′′(2083mm)

Width

Powered Number

Fabric Grade A B

C

D

E

F

G

36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm)

HFP-3650-4 T HFP-4250-4 T HFP-4850-4 T HFP-5450-4 T HFP-6050-4 T HFP-3664-4 T HFP-4264-4 T HFP-4864-4 T HFP-5464-4 T HFP-6064-4 T HFP-3668-4 T HFP-4268-4 T HFP-4868-4 T HFP-5468-4 T HFP-6068-4 T HFP-3682-4 T HFP-4282-4 T HFP-4882-4 T HFP-5482-4 T HFP-6082-4 T

$1500 1580 1640 1710 1789 $1571 1649 1706 1795 1885 $1636 1721 1779 1865 1964 $1898 2006 2080 2161 2250

$1612 1692 1752 1822 1901 $1693 1771 1828 1917 2007 $1758 1843 1901 1987 2086 $2020 2128 2202 2283 2372

$1666 1746 1806 1876 1955 $1765 1843 1900 1989 2079 $1830 1915 1973 2059 2158 $2092 2200 2274 2355 2444

$1690 1770 1830 1900 1979 $1817 1895 1952 2041 2131 $1894 1979 2037 2123 2222 $2210 2318 2392 2473 2562

$1750 1830 1890 1960 2039 $1889 1967 2024 2113 2203 $1974 2059 2117 2203 2302 $2306 2414 2488 2569 2658

$1810 1890 1950 2020 2099 $1967 2045 2102 2191 2281 $2058 2143 2201 2287 2386 $2408 2516 2590 2869 2760

$1546 1626 1686 1756 1835 $1621 1699 1756 1845 1935 $1686 1771 1829 1915 2014 $1948 2056 2130 2211 2300

Class BA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

99

UniGroup Too Price List

Open Frame Monolithic Panel with Low Profile Wood Top Cap PLACES

Open Frame

Features

Specification Tips

• Includes non-powered or powered panel assembly, low profile top cap with aligner, with or without one-piece base raceway cover, 1.6 hinge kits, side trim rails, leveling glides and carpet gripper; power distribution assembly/flex connector(s) when power is specified. .6 base raceway end caps are shipped with each panel.Order additional as necessary. • Panel thickness is 2′′(51mm). • Base raceway is 4′′(102mm) high. • Powered raceway with or without raceway cover requires modified catalog number and list price. • Powered panels are available for countries that utilize 120 volt 60 hertz electrical systems and U.S. configured plugs and outlets. • Shipped with unassembled top cap, base raceway cover and side trim rails. • Does not accept top feed modules.

• Panels will accept glazed add-on panels up to a combined height of 82′′(2083mm). For aesthetic consistency, specify PLACES add-on panels. • Wood top cap panels require end-of-run finish posts for end conditions and variable height conditions. • Flex connectors provided for powered monolithic panels accommodate straight in-line, inside 90°, and inside 120° conditions (if applicable). • Receptacles for powered panels must be specified separately. • Raceway cover must be separately specified for option -E (no raceway cover).

To Order, Specify: 1) Product number. 2) Trim color for raceway cover, glide housings, end caps and side trim rails.

HON-T (Non Powered)

C

R

3) Wood finish color for top cap.

HOP-T (3-Circuit Powered) HOP-T6 (6-Circuit Powered)

US

Non-Powered Panel with Base Raceway Cover, see opposite page. The following options require modification of the 3-Circuit Non-Powered (Example: HON-4864-T) product numbers and list prices shown on opposite page:

Panel Width

Non-Powered without Base Raceway Cover (Example: HON-4864-TE)

3-Circuit Powered without Base Raceway Cover (Example: HOP-4864-TE)

6-Circuit Powered without Base Raceway Cover (Example: HOP-4864-T6E)

or

or

3-Circuit Powered (Example: HOP-4864-T)

6-Circuit Powered (Example: HOP-4864-T6)

or

or

NYC 3-Circuit Powered (Example: HOP-4864-TY)

NYC 6-Circuit Powered (Example: HOP-4864-T6Y)

NYC 3-Circuit Powered without Base Raceway Cover (Example: HOP-4864-TYE)

NYC 6-Circuit Powered without Base Raceway Cover (Example: HOP-4864-T6YE)

Add:

Deduct:

Add:

Add:

Add:

12′′(305mm)

-$26

$155*

n/a

n/a

n/a

18′′(457mm)

-36

155

n/a

$107

n/a

24′′(610mm)

-44

155

$276

99

$220

30′′(762mm)

-46

155

276

96

217

36′′(914mm)

-50

155

276

87

208

42′′(1067mm)

-57

155

276

81

202

48′′(1219mm)

-60

155

276

75

196

54′′(1372mm)

-63

155

276

69

190

60′′(1524mm)

-69

155

276

63

184

*The 12 ′′-wide panel has a pass-through connector and a non-powered raceway cover.

NOTES: • Powered panels with raceway covers ship with receptacle ports in the base raceway cover. Receptacle ports on the raceway cover measure 2.35 ′′(60mm) top-to-bottom and 2.88 ′′(73mm) side-to-side. • Non-powered panels ship without receptacle ports in the base raceway cover. • Powered panels with Power Distribution Assemblies (PDA) but without raceway covers require separately specified base raceway covers for power and communication port locations other than the standard powered base raceway cover. • New York City (NYC) electrical applications require field installation of PDA. • New York Port Authority (NYPA) electrical applications require metal raceway covers. To order, specify NYC powered panels without raceway cover and separately specify metal covers through Haworth e-Parts. • Some building codes may restrict the use of panel heights greater than 69 ′′(1753mm). Consult your local code authority to assure that the furniture layout is compliant. • For International Power, specify non-powered panels and use Power Logic components. See Specification Guide for more information on Power Logic. • For Chicago power, specify non-powered panels without a base raceway cover and separately specify Chicago power retrofit kit.

100

April 2008 / USA

Class BA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

UniGroup Too Price List

Open Frame Monolithic Panel with Low Profile Wood Top Cap PLACES Actual Height Open Frame

44′′(1118mm)

50′′(1270mm)

64′′(1626mm)

68′′(1727mm)

82′′(2083mm)

Width

Non-Powered Number

Price

12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm)

HON-1244- T HON-1844- T HON-2444- T HON-3044- T HON-3644- T HON-4244- T HON-4844- T HON-5444- T HON-6044- T HON-1250- T HON-1850- T HON-2450- T HON-3050- T HON-3650- T HON-4250- T HON-4850- T HON-5450- T HON-6050- T HON-1264- T HON-1864- T HON-2464- T HON-3064- T HON-3664- T HON-4264- T HON-4864- T HON-5464- T HON-6064- T HON-1268- T HON-1868- T HON-2468- T HON-3068- T HON-3668- T HON-4268- T HON-4868- T HON-5468- T HON-6068- T HON-1282- T HON-1882- T HON-2482- T HON-3082- T HON-3682- T HON-4282- T HON-4882- T HON-5482- T HON-6082- T

$ 510 558 618 677 736 802 912 989 1068 $ 525 574 633 695 764 840 948 1024 1110 $ 550 598 662 737 819 899 1003 1078 1157 $ 584 642 705 776 871 952 1062 1136 1233 $ 661 723 813 913 1065 1127 1201 1289 1388

Class BA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

101

UniGroup Too Price List

Glazed Monolithic Panel with Low Profile Wood Top Cap PLACES

Glazed

Features

Specification Tips

• Includes non-powered or powered panel assembly, low profile top cap with aligner, with or without one-piece base raceway cover, 1.6 hinge kits, side trim rails, leveling glides and carpet gripper; power distribution assembly/flex connector(s) when power is specified. .6 base raceway end caps are shipped with each panel. Order additional as necessary. • Panel thickness is 2′′(51mm). • Base raceway is 4′′(102mm) high. • Powered raceway with or without raceway cover requires modified catalog number and list price. • Powered panels are available for countries that utilize 120 volt 60 hertz electrical systems and U.S. configured plugs and outlets. • Shipped with unassembled top cap, base raceway cover and side trim rails. • Does not accept top feed modules.

• Panels will accept glazed add-on panels up to a combined height of 82′′(2083mm). For aesthetic consistency, specify PLACES add-on panels. • Wood top cap panels require end-of-run finish posts for end conditions and variable height conditions. • Glazed panels accept muntin kits and wainscot kits. • Flex connectors provided for powered monolithic panels accommodate straight in-line, inside 90°, and inside 120° conditions (if applicable). • Receptacles for powered panels must be specified separately. • Raceway cover must be separately specified for option -E (no raceway cover).

To Order, Specify: 1) Product number.

HGN-T (Non Powered)

C

R

HGP-T (3-Circuit Powered) HGP-T6 (6-Circuit Powered)

2) Glazing finish color. 3) Trim color for raceway cover, glide housings, end caps and side trim rails.

US

4) Wood finish color for top cap.

Non-Powered Panel with Base Raceway Cover, see opposite page. The following options require modification of the 3-Circuit Non-Powered (Example: HGN-4864-T) product numbers and list prices shown on opposite page:

Panel Width

Non-Powered without Base Raceway Cover (Example: HGN-4864-TE)

3-Circuit Powered (Example: HGP-4864-T)

6-Circuit Powered (Example: HGP-4864-T6)

or

or

NYC 3-Circuit Powered (Example: HGP-4864-TY)

3-Circuit Powered without Base Raceway Cover (Example: HGP-4864-TE)

6-Circuit Powered without Base Raceway Cover (Example: HGP-4864-T6E)

or

or

NYC 6-Circuit Powered (Example: HGP-4864-T6Y)

NYC 3-Circuit Powered without Base Raceway Cover (Example: HGP-4864-TYE)

NYC 6-Circuit Powered without Base Raceway Cover (Example: HGP-4864-T6YE)

Add:

Deduct:

Add:

Add:

Add:

12′′(305mm)

-$26

$155*

n/a

n/a

n/a

18′′(457mm)

-36

155

n/a

$107

n/a

24′′(610mm)

-44

155

$276

99

$220

30′′(762mm)

-46

155

276

96

217

36′′(914mm)

-50

155

276

87

208

42′′(1067mm)

-57

155

276

81

202

48′′(1219mm)

-60

155

276

75

196

54′′(1372mm)

-63

155

276

69

190

60′′(1524mm)

-69

155

276

63

184

*The 12 ′′-wide panel has a pass-through connector and a non-powered raceway cover.

NOTES: • Powered panels with raceway covers ship with receptacle ports in the base raceway cover. Receptacle ports on the raceway cover measure 2.35 ′′(60mm) top-to-bottom and 2.88 ′′(73mm) side-to-side. • Non-powered panels ship without receptacle ports in the base raceway cover. • Powered panels with Power Distribution Assemblies (PDA) but without raceway covers require separately specified base raceway covers for power and communication port locations other than the standard powered base raceway cover. • New York City (NYC) electrical applications require field installation of PDA. • New York Port Authority (NYPA) electrical applications require metal raceway covers. To order, specify NYC powered panels without raceway cover and separately specify metal covers through Haworth e-Parts. • Some building codes may restrict the use of panel heights greater than 69 ′′(1753mm). Consult your local code authority to assure that the furniture layout is compliant. • For International Power, specify non-powered panels and use Power Logic components. See specification guide for more information on Power Logic. • For Chicago power, specify non-powered panels without a base raceway cover and separately specify Chicago power retrofit kit.

102

April 2008 / USA

Class BA – GSA: Open Market Canadian Conversion Factor: Refer to haworth.com/Canada

UniGroup Too Price List

Glazed Monolithic Panel with Low Profile Wood Top Cap PLACES Actual Height Glazed

44′′(1118mm)

50′′(1270mm)

64′′(1626mm)

68′′(1727mm)

82′′(2083mm)

Width

Non-Powered Number

Clear or Bronze Price

Frosted Price

12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm)

HGN-1244- T HGN-1844- T HGN-2444- T HGN-3044- T HGN-3644- T HGN-4244- T HGN-4844- T HGN-5444- T HGN-6044- T HGN-1250- T HGN-1850- T HGN-2450- T HGN-3050- T HGN-3650- T HGN-4250- T HGN-4850- T HGN-5450- T HGN-6050- T HGN-1264- T HGN-1864- T HGN-2464- T HGN-3064- T HGN-3664- T HGN-4264- T HGN-4864- T HGN-5464- T HGN-6064- T HGN-1268- T HGN-1868- T HGN-2468- T HGN-3068- T HGN-3668- T HGN-4268- T HGN-4868- T HGN-5468- T HGN-6068- T HGN-1282- T HGN-1882- T HGN-2482- T HGN-3082- T HGN-3682- T HGN-4282- T HGN-4882- T HGN-5482- T HGN-6082- T

$ 693 780 874 978 1081 1203 1321 1424 1536 $ 712 800 895 1008 1123 1241 1347 1460 1565 $ 729 830 931 1041 1157 1303 1409 1517 1637 $ 777 884 996 1096 1225 1389 1503 1609 1745 $ 888 1048 1204 1325 1468 1651 1780 1903 2049

$ 847 934 1028 1132 1320 1442 1560 1663 1775 $ 866 954 1049 1162 1362 1480 1586 1699 1804 $ 924 1025 1126 1236 1457 1603 1709 1817 1937 $ 972 1079 1191 1291 1525 1689 1803 1909 2045 $1083 1243 1399 1520 1768 1951 2080 2203 2349

Product marked with this symbol available as GSA open market.

Class BA – GSA: Open Market Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

103

UniGroup Too Price List

Single Door and Frame with Low Profile Wood Top Cap PLACES Actual Height Single Door — Wood

82′′(2083mm)

Width

Door Swing

Number 1

36′′(914mm) 42′′(1067mm)

Left Left

HDS-3682HDS-4282-

Wood Finish Group I II LT LT

$2267 2506

Features

To Order, Specify:

• Includes complete panel assembly [hinge sets, carpet gripper, door jamb, side rails and trim, hollow core door (1 5/8′′(41mm) thick), door hinges, hardware, brushed chrome knobs or ADA lever with lockset and keys, and threshold]. • Wood veneer surfaces on both sides of door. • Shipped left-hand swing. Field-adjustable for right-hand swing. • 1′′(25mm) deep top communications raceway. • Threshold will be charcoal trim color. • No power and communication in base raceway.

1) Product number, including:

$2302 2546

1 Handle Designation: K Knob H ADA lever, add $145 list. 2) Wood finish color for door surfaces. 3) Trim color for door frame, raceway cover, glide housings, end caps and side trim rails. 4) Wood finish color for top cap.

Specification Tips • Door may be placed a maximum of 24′′(610mm) from supporting panels at 90°. • Will not accept add-on panel.

Door Opening Clearance HDS-LT

Door Size Height

Width

3682

78 1/2′′(1994mm)

28 1/2′′(724mm)

4282

78 1/2′′(1994mm)

34 1/2′′(876mm)

(Left-hand swing)

104

April 2008 / USA

Class BA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

NOTES: Some building codes may restrict the use of panel heights greater than 69 ′′(1753mm). Consult your local code authority to assure that the furniture layout is compliant prior to installation. Most building codes for new buildings require a minimum clear door width of 32 ′′(813mm). To meet this requirement, the 42 ′′(1067mm) door must be ordered.

UniGroup Too Price List

This page intentionally blank

April 2008 / USA

105

UniGroup Too Price List

Monolithic Fabric Panel with Low Profile Steel Top Cap PLACES

Fabric

Features

Specification Tips • For mixed fabric surfaces, price at higher fabric grade. • Panels will accept add-on panels up to a combined height of 82″(2083mm). For aesthetic consistency, specify PLACES add-on panels. • Flex connectors provided for powered monolithic panels accommodate straight in-line, inside 90°, and inside 120° conditions (if applicable). • Receptacles for powered panels must be specified separately. • Raceway cover must be separately specified for option -E (no raceway cover). • Additional base raceway end caps will need to be specified if finish post are not ordered.

HFN (Non Powered)

• Includes non-powered or powered panel assembly, low profile top cap, with or without one-piece base raceway cover, 1.6 hinge kits, side trim rails, leveling glides and carpet gripper; power distribution assembly/flex connector(s) when power is specified. .6 base raceway end caps are shipped with each panel. Order additional as necessary. • Acoustical panel surfaces. • Panel surfaces may have the same fabric on both sides or a different fabric on each side. • Panel thickness is 2′′(51mm). • Base raceway is 4′′(102mm) high. • Powered raceway with or without raceway cover requires modified catalog number and list price. • Powered panels are available for countries that utilize 120 volt 60 hertz electrical systems and U.S. configured plugs and outlets. • Shipped with unassembled top cap, base raceway cover and side trim rails.

C

R

HFP (3-Circuit Powered) HFP-6 (6-Circuit Powered)

To Order, Specify: 1) Product number. 2) Fabric/colorway for panel side one. 3) Fabric/colorway for panel side two.

US

4) Trim color for raceway cover, glide housings and end caps.

NOTE:

5) Trim color for top cap and side trim rails.

This panel has fabric/colorway restrictions, see systems fabrics/ color legend.

Non-Powered Panel with Base Raceway Cover, see opposite page. The following options require modification of the 3-Circuit Non-Powered (Example: HFN-4864) product numbers and list prices shown on opposite page: 3-Circuit Powered without Base Raceway Cover (Example: HFP-4864-E) 3-Circuit Powered (Example: HFP-4864)

Panel Width

Non-Powered without Base Raceway Cover (Example: HFN-4864-E)

6-Circuit Powered (Example: HFP-4864-6)

6-Circuit Powered without Base Raceway Cover (Example: HFP-4864-6E)

or

or NYC 6-Circuit Powered without Base Raceway Cover (Example: HFP-4864-6YE)

Add:

or

or

NYC 3-Circuit Powered (Example: HFP-4864-Y)

NYC 6-Circuit Powered (Example: HFP-4864-6Y)

NYC 3-Circuit Powered without Base Raceway Cover (Example: HFP-4864-YE)

Deduct:

Add:

Add:

Add:

12′′(305mm)

-$26

$155*

n/a

n/a

n/a

18′′(457mm)

-36

155

n/a

$107

n/a

24′′(610mm)

-44

155

$276

99

$220

30′′(762mm)

-46

155

276

96

217

36′′(914mm)

-50

155

276

87

208

42′′(1067mm)

-57

155

276

81

202

48′′(1219mm)

-60

155

276

75

196

54′′(1372mm)

-63

155

276

69

190

60′′(1524mm)

-69

155

276

63

184

*The 12 ′′-wide panel has a pass-through connector and a non-powered raceway cover.

NOTES: • Powered panels with raceway covers ship with receptacle ports in the base raceway cover. Receptacle ports on the raceway cover measure 2.35 ′′(60mm) top-to-bottom and 2.88 ′′(73mm) side-to-side. • Non-powered panels ship without receptacle ports in the base raceway cover. • Powered panels with Power Distribution Assemblies (PDA) but without raceway covers require separately specified base raceway covers for power and communication port locations other than the standard powered base raceway cover. • New York City (NYC) electrical applications require field installation of PDA. • New York Port Authority (NYPA) electrical applications require metal raceway covers. To order, specify NYC powered panels without raceway cover and separately specify metal covers through Haworth e-Parts. • Some building codes may restrict the use of panel heights greater than 69 ′′(1753mm). Consult your local code authority to assure that the furniture layout is compliant. • For International Power, specify non-powered panels and use Power Logic components. See Specification Guide for more information on Power Logic. • For Chicago power, specify non-powered panels without a base raceway cover and separately specify Chicago power retrofit kit.

106

April 2008 / USA

Class BA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

UniGroup Too Price List

Monolithic Fabric Panel with Low Profile Steel Top Cap PLACES Actual Height Fabric

30′′(762mm)

37′′(940mm)

44′′(1118mm)

50′′(1270mm)

56′′(1422mm)

64′′(1626mm)

68′′(1727mm)

82′′(2083mm)

Width

Non-Powered Number

Fabric Grade A B

C

D

E

F

G

12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm)

HFN-1230HFN-1830HFN-2430HFN-3030HFN-3630HFN-4230HFN-4830HFN-5430HFN-6030HFN-1237HFN-1837HFN-2437HFN-3037HFN-3637HFN-4237HFN-4837HFN-5437HFN-6037HFN-1244HFN-1844HFN-2444HFN-3044HFN-3644HFN-4244HFN-4844HFN-5444HFN-6044HFN-1250HFN-1850HFN-2450HFN-3050HFN-3650HFN-4250HFN-4850HFN-5450HFN-6050HFN-1256HFN-1856HFN-2456HFN-3056HFN-3656HFN-4256HFN-4856HFN-5456HFN-6056HFN-1264HFN-1864HFN-2464HFN-3064HFN-3664HFN-4264HFN-4864HFN-5464HFN-6064HFN-1268HFN-1868HFN-2468HFN-3068HFN-3668HFN-4268HFN-4868HFN-5468HFN-6068HFN-1282HFN-1882HFN-2482HFN-3082HFN-3682HFN-4282HFN-4882HFN-5482HFN-6082-

$ 507 557 604 693 727 797 839 900 957 $ 531 588 638 719 768 839 886 942 1005 $ 557 620 664 743 772 845 891 949 1014 $ 579 649 688 764 810 882 932 1000 1075 $ 596 676 700 786 845 918 966 1043 1125 $ 616 704 712 806 881 951 998 1085 1171 $ 658 748 767 865 946 1023 1071 1155 1250 $ 751 910 968 1094 1208 1308 1372 1451 1536

$ 595 645 692 781 839 909 951 1012 1069 $ 619 676 726 807 880 951 998 1054 1117 $ 645 708 752 831 884 957 1003 1061 1126 $ 667 737 776 852 922 994 1044 1112 1187 $ 688 768 792 878 963 1036 1084 1161 1243 $ 712 800 808 902 1003 1073 1120 1207 1293 $ 754 844 863 961 1068 1145 1193 1277 1372 $ 847 1006 1064 1190 1330 1430 1494 1573 1658

$ 639 689 736 825 893 963 1005 1066 1123 $ 663 720 770 851 934 1005 1052 1108 1171 $ 689 752 796 875 938 1011 1057 1115 1180 $ 711 781 820 896 976 1048 1098 1166 1241 $ 734 814 838 924 1025 1098 1146 1223 1305 $ 760 848 856 950 1075 1145 1192 1279 1365 $ 802 892 911 1009 1140 1217 1265 1349 1444 $ 895 1054 1112 1238 1402 1502 1566 1645 1730

$ 649 699 746 835 903 973 1015 1076 1133 $ 673 730 780 861 944 1015 1062 1118 1181 $ 699 762 806 885 940 1013 1059 1117 1182 $ 721 791 830 906 1000 1072 1122 1190 1265 $ 746 826 850 936 1059 1132 1180 1257 1339 $ 774 862 870 964 1127 1197 1244 1331 1417 $ 816 906 925 1023 1204 1281 1329 1413 1508 $ 909 1068 1126 1252 1520 1620 1684 1763 1848

$ 663 713 760 849 913 983 1025 1086 1143 $ 687 744 794 875 954 1025 1072 1128 1191 $ 713 776 820 899 990 1063 1109 1167 1232 $ 735 805 844 920 1060 1132 1182 1250 1325 $ 758 838 862 948 1125 1198 1246 1323 1405 $ 784 872 880 974 1199 1269 1316 1403 1489 $ 826 916 935 1033 1284 1361 1409 1493 1588 $ 919 1078 1174 1300 1616 1716 1780 1859 1944

$ 673 723 770 859 927 997 1039 1100 1157 $ 697 754 804 885 996 1067 1114 1170 1233 $ 723 786 830 909 1042 1115 1161 1219 1284 $ 745 815 854 930 1120 1192 1242 1310 1385 $ 770 850 874 960 1193 1266 1314 1391 1473 $ 794 882 912 1006 1277 1347 1394 1481 1567 $ 836 926 967 1065 1368 1445 1493 1577 1672 $ 929 1088 1216 1348 1718 1818 1882 1961 2046

$ 541 591 638 727 773 843 885 946 1003 $ 565 622 672 753 814 885 932 988 1051 $ 591 654 698 777 818 891 937 995 1060 $ 613 683 722 798 856 928 978 1046 1121 $ 632 712 736 822 893 966 1014 1091 1173 $ 654 742 750 844 931 1001 1048 1135 1221 $ 696 786 805 903 996 1073 1121 1205 1300 $ 789 948 1006 1132 1258 1358 1422 1501 1586

Class BA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

107

UniGroup Too Price List

Basic Monolithic Fabric Panel with Low Profile Steel Top Cap PLACES

Fabric

Features

Specification Tips • For mixed fabric surfaces, price at higher fabric grade. • Panels will accept add-on panels up to a combined height of 82″(2083mm). For aesthetic consistency, specify PLACES add-on panels. • Flex connectors provided for powered monolithic panels accommodate straight in-line, inside 90°, and inside 120° conditions (if applicable). • Receptacles for powered panels must be specified separately. • Raceway cover must be separately specified for option -E (no raceway cover). • Additional base raceway end caps will need to be specified if finish post are not ordered.

HMN (Non Powered)

• Includes non-powered or powered panel assembly, low profile top cap, with or without one-piece base raceway cover, 1.6 hinge kits, side trim rails, leveling glides and carpet gripper; power distribution assembly/flex connector(s) when power is specified. .6 base raceway end caps are shipped with each panel. Order additional as necessary. • Acoustical panel surfaces. • Panel surfaces may have the same fabric on both sides or a different fabric on each side. • Panel thickness is 2′′(51mm). • Base raceway is 4′′(102mm) high. • Powered raceway with or without raceway cover requires modified catalog number and list price. • Powered panels are available for countries that utilize 120 volt 60 hertz electrical systems and U.S. configured plugs and outlets. • Shipped with unassembled top cap, base raceway cover and side trim rails.

C

R

HMP (3-Circuit Powered) HMP-6 (6-Circuit Powered)

To Order, Specify: 1) Product number. 2) Fabric/colorway for panel side one. 3) Fabric/colorway for panel side two. 4) Trim color for raceway cover, glide housings and end caps.

US

5) Trim color for top cap and side trim rails.

NOTE: This panel has fabric/colorway restrictions, see systems fabrics/ color legend.

Non-Powered Panel with Base Raceway Cover, see opposite page. The following options require modification of the 3-Circuit Non-Powered (Example: HMN-4864) product numbers and list prices shown on opposite page:

Panel Width

Non-Powered without Base Raceway Cover (Example: HMN-4864-E)

3-Circuit Powered (Example: HMP-4864)

6-Circuit Powered (Example: HMP-4864-6)

or

or

NYC 3-Circuit Powered (Example: HMP-4864-Y)

3-Circuit Powered without Base Raceway Cover (Example: HMP-4864-E)

6-Circuit Powered without Base Raceway Cover (Example: HMP-4864-6E)

or

or

NYC 6-Circuit Powered (Example: HMP-4864-6Y)

NYC 3-Circuit Powered without Base Raceway Cover (Example: HMP-4864-YE)

NYC 6-Circuit Powered without Base Raceway Cover (Example: HMP-4864-6YE)

Add:

Deduct:

Add:

Add:

Add:

12′′(305mm)

-$26

$155*

n/a

n/a

n/a

18′′(457mm)

-36

155

n/a

$107

n/a

24′′(610mm)

-44

155

$276

99

$220

30′′(762mm)

-46

155

276

96

217

36′′(914mm)

-50

155

276

87

208

42′′(1067mm)

-57

155

276

81

202

48′′(1219mm)

-60

155

276

75

196

54′′(1372mm)

-63

155

276

69

190

60′′(1524mm)

-69

155

276

63

184

*The 12 ′′-wide panel has a pass-through connector and a non-powered raceway cover.

NOTES: • Powered panels with raceway covers ship with receptacle ports in the base raceway cover. Receptacle ports on the raceway cover measure 2.35 ′′(60mm) top-to-bottom and 2.88 ′′(73mm) side-to-side. • Non-powered panels ship without receptacle ports in the base raceway cover. • Powered panels with Power Distribution Assemblies (PDA) but without raceway covers require separately specified base raceway covers for power and communication port locations other than the standard powered base raceway cover. • New York City (NYC) electrical applications require field installation of PDA. • New York Port Authority (NYPA) electrical applications require metal raceway covers. To order, specify NYC powered panels without raceway cover and separately specify metal covers through Haworth e-Parts. • Some building codes may restrict the use of panel heights greater than 69 ′′(1753mm). Consult your local code authority to assure that the furniture layout is compliant. • For International Power, specify non-powered panels and use Power Logic components. See Specification Guide for more information on Power Logic. • For Chicago power, specify non-powered panels without a base raceway cover and separately specify Chicago power retrofit kit.

108

April 2008 / USA

Class BA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

UniGroup Too Price List

Basic Monolithic Fabric Panel with Low Profile Steel Top Cap PLACES Actual Height Fabric Surface — Low Profile Steel Top Cap

30′′(762mm)

37′′(940mm)

44′′(1118mm)

50′′(1270mm)

56′′(1422mm)

64′′(1626mm)

68′′(1727mm)

82′′(2083mm)

Width

Non-Powered Number

Fabric Grade A B

C

D

E

F

G

12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm)

HMN-1230HMN-1830HMN-2430HMN-3030HMN-3630HMN-4230HMN-4830HMN-5430HMN-6030HMN-1237HMN-1837HMN-2437HMN-3037HMN-3637HMN-4237HMN-4837HMN-5437HMN-6037HMN-1244HMN-1844HMN-2444HMN-3044HMN-3644HMN-4244HMN-4844HMN-5444HMN-6044HMN-1250HMN-1850HMN-2450HMN-3050HMN-3650HMN-4250HMN-4850HMN-5450HMN-6050HMN-1256HMN-1856HMN-2456HMN-3056HMN-3656HMN-4256HMN-4856HMN-5456HMN-6056HMN-1264HMN-1864HMN-2464HMN-3064HMN-3664HMN-4264HMN-4864HMN-5464HMN-6064HMN-1268HMN-1868HMN-2468HMN-3068HMN-3668HMN-4268HMN-4868HMN-5468HMN-6068HMN-1282HMN-1882HMN-2482HMN-3082HMN-3682HMN-4282HMN-4882HMN-5482HMN-6082-

$ 420 463 502 580 603 664 699 749 795 $ 442 489 531 597 635 699 737 785 837 $ 463 515 552 620 643 702 741 790 842 $ 479 543 575 637 671 734 776 833 897 $ 495 564 583 655 702 763 802 866 936 $ 510 585 591 671 733 791 831 901 975 $ 548 623 637 720 786 853 891 963 1043 $ 626 761 806 912 1006 1089 1147 1210 1282

$ 508 551 590 668 715 776 811 861 907 $ 530 577 619 685 747 811 849 897 949 $ 551 603 640 708 755 814 853 902 954 $ 567 631 663 725 783 846 888 945 1009 $ 587 656 675 747 820 881 920 984 1054 $ 606 681 687 767 855 913 953 1023 1097 $ 644 719 733 816 908 975 1013 1085 1165 $ 722 857 902 1008 1128 1211 1269 1332 1404

$ 552 595 634 712 769 830 865 915 961 $ 574 621 663 729 801 865 903 951 1003 $ 595 647 684 752 809 868 907 956 1008 $ 611 675 707 769 837 900 942 999 1063 $ 633 702 721 793 882 943 982 1046 1116 $ 654 729 735 815 927 985 1025 1095 1169 $ 692 767 781 864 980 1047 1085 1157 1237 $ 770 905 950 1056 1200 1283 1341 1404 1476

$ 562 605 644 716 779 840 875 925 971 $ 584 631 673 739 811 875 913 961 1013 $ 605 657 694 762 827 886 925 974 1026 $ 621 685 717 779 861 924 966 1023 1087 $ 645 714 733 805 914 975 1014 1078 1148 $ 668 743 749 829 977 1035 1075 1145 1219 $ 706 781 795 878 1044 1111 1149 1221 1301 $ 784 919 962 1068 1318 1401 1459 1522 1594

$ 576 619 658 736 789 850 885 935 981 $ 598 645 687 753 821 885 923 971 1023 $ 619 671 708 776 861 920 959 1008 1060 $ 635 699 731 793 919 982 1024 1081 1145 $ 657 726 745 817 982 1043 1082 1146 1216 $ 678 753 759 839 1051 1109 1149 1219 1293 $ 716 791 805 888 1124 1191 1229 1301 1381 $ 794 929 1010 1116 1414 1497 1555 1618 1690

$ 586 629 668 746 803 864 899 949 995 $ 608 655 697 763 863 927 965 1013 1065 $ 629 681 718 786 913 972 1011 1060 1112 $ 645 709 741 803 981 1044 1086 1143 1207 $ 669 738 757 829 1048 1109 1148 1212 1282 $ 688 763 791 871 1129 1187 1227 1297 1371 $ 726 801 837 920 1208 1275 1313 1385 1465 $ 804 939 1060 1166 1514 1597 1655 1718 1790

$ 454 497 536 614 649 710 745 795 841 $ 476 523 565 631 681 745 783 831 883 $ 497 549 586 654 689 748 787 836 888 $ 513 577 609 671 717 780 822 879 943 $ 531 600 619 691 750 811 850 914 984 $ 548 623 629 709 783 841 881 951 1025 $ 586 661 675 758 836 903 941 1013 1093 $ 664 799 844 950 1056 1139 1197 1260 1332

Class BA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

109

UniGroup Too Price List

High-Performance Monolithic Fabric Panel/Low Profile Steel Top Cap PLACES

Fabric

Features

Specification Tips • For mixed fabric surfaces, price at higher fabric grade. • Panels will accept add-on panels up to a combined height of 82″(2083mm). For aesthetic consistency, specify PLACES add-on panels. • Flex connectors provided for powered monolithic panels accommodate straight in-line, inside 90°, and inside 120° conditions (if applicable). • Receptacles for powered panels must be specified separately. • Raceway cover must be separately specified for option -E (no raceway cover). • Additional base raceway end caps will need to be specified if finish post are not ordered.

HFN-H (Non Powered)

• Includes non-powered or powered panel assembly, low profile top cap, with or without one-piece base raceway cover, 1.6 hinge kits, side trim rails, leveling glides and carpet gripper; power distribution assembly/flex connector(s) when power is specified. .6 base raceway end caps are shipped with each panel. Order additional as necessary. • Acoustical panel surfaces. • Panel surfaces may have the same fabric on both sides or a different fabric on each side. • Panel thickness is 2′′(51mm). • Base raceway is 4′′(102mm) high. • Powered raceway with or without raceway cover requires modified catalog number and list price. • Powered panels are available for countries that utilize 120 volt 60 hertz electrical systems and U.S. configured plugs and outlets. • Shipped with unassembled top cap, base raceway cover and side trim rails.

HFP-H (3-Circuit Powered) HFP-H6 (6-Circuit Powered)

To Order, Specify: 1) Product number. 2) Fabric/colorway for panel side one. 3) Fabric/colorway for panel side two.

C

R

4) Trim color for raceway cover, glide housings and end caps.

US

NOTE:

5) Trim color for top cap and side trim rails.

This panel has fabric/colorway restrictions, see systems fabrics/ color legend.

Non-Powered Panel with Base Raceway Cover, see opposite page. The following options require modification of the 3-Circuit Non-Powered (Example: HFN-4864-H) product numbers and list prices shown on opposite page:

Panel Width

Non-Powered without Base Raceway Cover (Example: HFN-4864-HE)

3-Circuit Powered without Base Raceway Cover (Example: HFP-4864-HE)

6-Circuit Powered without Base Raceway Cover (Example: HFP-4864-H6E)

or

or

3-Circuit Powered (Example: HFP-4864-H)

6-Circuit Powered (Example: HFP-4864-H6)

or

or

NYC 3-Circuit Powered (Example: HFP-4864-HY)

NYC 6-Circuit Powered (Example: HFP-4864-H6Y)

NYC 3-Circuit Powered without Base Raceway Cover (Example: HFP-4864-HYE)

NYC 6-Circuit Powered without Base Raceway Cover (Example: HFP-4864-H6YE)

Add:

Deduct:

Add:

Add:

Add:

12′′(305mm)

-$26

$155*

n/a

n/a

n/a

18′′(457mm)

-36

155

n/a

$107

n/a

24′′(610mm)

-44

155

$276

99

$220

30′′(762mm)

-46

155

276

96

217

36′′(914mm)

-50

155

276

87

208

42′′(1067mm)

-57

155

276

81

202

48′′(1219mm)

-60

155

276

75

196

54′′(1372mm)

-63

155

276

69

190

60′′(1524mm)

-69

155

276

63

184

*The 12 ′′-wide panel has a pass-through connector and a non-powered raceway cover.

NOTES: • Powered panels with raceway covers ship with receptacle ports in the base raceway cover. Receptacle ports on the raceway cover measure 2.35 ′′(60mm) top-to-bottom and 2.88 ′′(73mm) side-to-side. • Non-powered panels ship without receptacle ports in the base raceway cover. • Powered panels with Power Distribution Assemblies (PDA) but without raceway covers require separately specified base raceway covers for power and communication port locations other than the standard powered base raceway cover. • New York City (NYC) electrical applications require field installation of PDA. • New York Port Authority (NYPA) electrical applications require metal raceway covers. To order, specify NYC powered panels without raceway cover and separately specify metal covers through Haworth e-Parts. • Some building codes may restrict the use of panel heights greater than 69 ′′(1753mm). Consult your local code authority to assure that the furniture layout is compliant. • For International Power, specify non-powered panels and use Power Logic components. See Specification Guide for more information on Power Logic. • For Chicago power, specify non-powered panels without a base raceway cover and separately specify Chicago power retrofit kit.

110

April 2008 / USA

Class BA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

UniGroup Too Price List

High-Performance Monolithic Fabric Panel/Low Profile Steel Top Cap PLACES Actual Height Fabric

30′′(762mm)

37′′(940mm)

44′′(1118mm)

50′′(1270mm)

64′′(1626mm)

68′′(1727mm)

82′′(2083mm)

Width

Non-Powered Number

Fabric Grade A B

C

D

E

F

G

12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm)

HFN-1230- H HFN-1830- H HFN-2430- H HFN-3030- H HFN-3630- H HFN-4230- H HFN-4830- H HFN-5430- H HFN-6030- H HFN-1237- H HFN-1837- H HFN-2437- H HFN-3037- H HFN-3637- H HFN-4237- H HFN-4837- H HFN-5437- H HFN-6037- H HFN-1244- H HFN-1844- H HFN-2444- H HFN-3044- H HFN-3644- H HFN-4244- H HFN-4844- H HFN-5444- H HFN-6044- H HFN-1250- H HFN-1850- H HFN-2450- H HFN-3050- H HFN-3650- H HFN-4250- H HFN-4850- H HFN-5450- H HFN-6050- H HFN-1264- H HFN-1864- H HFN-2464- H HFN-3064- H HFN-3664- H HFN-4264- H HFN-4864- H HFN-5464- H HFN-6064- H HFN-1268- H HFN-1868- H HFN-2468- H HFN-3068- H HFN-3668- H HFN-4268- H HFN-4868- H HFN-5468- H HFN-6068- H HFN-1282- H HFN-1882- H HFN-2482- H HFN-3082- H HFN-3682- H HFN-4282- H HFN-4882- H HFN-5482- H HFN-6082- H

$ 534 584 631 720 763 833 875 936 993 $ 558 615 665 746 804 875 922 978 1041 $ 584 647 691 770 808 881 927 985 1050 $ 606 676 715 791 846 918 968 1036 1111 $ 648 736 744 838 921 991 1038 1125 1211 $ 690 780 799 897 986 1063 1111 1195 1290 $ 783 942 1000 1126 1248 1348 1412 1491 1576

$ 622 672 719 808 875 945 987 1048 1105 $ 646 703 753 834 916 987 1034 1090 1153 $ 672 735 779 858 920 993 1039 1097 1162 $ 694 764 803 879 958 1030 1080 1148 1223 $ 744 832 840 934 1043 1113 1160 1247 1333 $ 786 876 895 993 1108 1185 1233 1317 1412 $ 879 1038 1096 1222 1370 1470 1534 1613 1698

$ 666 716 763 852 929 999 1041 1102 1159 $ 690 747 797 878 970 1041 1088 1144 1207 $ 716 779 823 902 974 1047 1093 1151 1216 $ 738 808 847 923 1012 1084 1134 1202 1277 $ 792 880 888 982 1115 1185 1232 1319 1405 $ 834 924 943 1041 1180 1257 1305 1389 1484 $ 927 1086 1144 1270 1442 1542 1606 1685 1770

$ 676 726 773 862 939 1009 1051 1112 1169 $ 700 757 807 888 980 1051 1098 1154 1217 $ 726 789 833 912 976 1049 1095 1153 1218 $ 748 818 857 933 1036 1108 1158 1226 1301 $ 806 894 902 996 1167 1237 1284 1371 1457 $ 848 938 957 1055 1244 1321 1369 1453 1548 $ 941 1100 1158 1284 1560 1660 1724 1803 1888

$ 690 740 787 876 949 1019 1061 1122 1179 $ 714 771 821 902 990 1061 1108 1164 1227 $ 740 803 847 926 1026 1099 1145 1203 1268 $ 762 832 871 947 1096 1168 1218 1286 1361 $ 816 904 912 1006 1239 1309 1356 1443 1529 $ 858 948 967 1065 1324 1401 1449 1533 1628 $ 951 1110 1206 1332 1656 1756 1820 1899 1984

$ 700 750 797 886 963 1033 1075 1136 1193 $ 724 781 831 912 1032 1103 1150 1206 1269 $ 750 813 857 936 1078 1151 1197 1255 1320 $ 772 842 881 957 1156 1228 1278 1346 1421 $ 826 914 944 1038 1317 1387 1434 1521 1607 $ 868 958 999 1097 1408 1485 1533 1617 1712 $ 961 1120 1248 1380 1758 1858 1922 2001 2086

$ 568 618 665 754 809 879 921 982 1039 $ 592 649 699 780 850 921 968 1024 1087 $ 618 681 725 804 854 927 973 1031 1096 $ 640 710 749 825 892 964 1014 1082 1157 $ 686 774 782 876 971 1041 1088 1175 1261 $ 728 818 837 935 1036 1113 1161 1245 1340 $ 821 980 1038 1164 1298 1398 1462 1541 1626

Class BA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

111

UniGroup Too Price List

Ported Monolithic Fabric Panel with Low Profile Steel Top Cap PLACES

Fabric Ported — One Port Right or Left

HFP-R (3-Circuit Powered — Right Port) C

R

HFP-L (3-Circuit Powered— Left Port)

US

NOTE: This panel has fabric/colorway restrictions, see systems fabrics/ color legend.

Features

Specification Tips

• Includes non-powered or powered panel assembly, low profile top cap, with or without one-piece base raceway cover, 1.6 hinge kits, side trim rails, leveling glides and carpet gripper; power distribution assembly/flex connector(s). .6 base raceway end caps are shipped with each panel. Order additional as necessary. • Acoustical panel surfaces. • Panel surfaces may have the same fabric on both sides or a different fabric on each side. • Panel thickness is 2′′(51mm). • Base raceway is 4′′(102mm) high. • Powered raceway with or without raceway cover requires modified catalog number and list price. • Powered panels are available for countries that utilize 120 volt 60 hertz electrical systems and U.S. configured plugs and outlets. • Shipped with unassembled top cap, base raceway cover and side trim rails. • Concealed 2′′(51mm) deep top raceway to store and route communication cables. • Cables are routed downward to ported opening above worksurface through internal, vertical panel frame rail. • Ported panels are only available as 3-circuit powered (both port location and base). Chicago and New York applications require modification of product number, see below. • Factory installed electrical power is routed upward to the ported openings from the base raceway. • A metal barrier, located inside the ported opening, shields electrical wires from communication cables. • Port option may be limited in New York City, consult your local code authority prior to specifying.

• For mixed fabric surfaces, price at higher fabric grade. • Panels will accept add-on panels up to a combined height of 82″(2083mm). For aesthetic consistency, specify PLACES add-on panels. • Flex connectors provided for powered monolithic panels accommodate straight in-line, inside 90°, and inside 120° conditions (if applicable). • Receptacles for powered panels must be specified separately. • Raceway cover must be separately specified for option -E (no raceway cover). • Additional base raceway end caps will need to be specified if finish post are not ordered. • When specifying two (2) colors, specify finish/color for the side with the port first. Then specify finish/color for the other side. • Ported panels require separate specification of port cover plates, see Specification Guide.

To Order, Specify: 1) Product number, including:

1 Port Specification: R Right-hand L

Left-hand

2) Fabric/colorway for panel side one (port side). 3) Fabric/colorway for panel side two. 4) Trim color for raceway cover, glide housings and end caps. 5) Trim color for top cap and side trim rails.

Powered Panel with Base Raceway Cover, see opposite page. The following options require modification of the 3-Circuit Powered (Example: HFP-4864-R) product numbers and list prices shown on opposite page: 3-Circuit Powered without Base Raceway Cover (Example: HFP-4864-RE) or

Panel Width

NYC 3-Circuit Powered (Example: HFP-4864-RY)

NYC 3-Circuit Powered without Base Raceway Cover (Example: HFP-4864-RYE)

Chicago Powered (Example: HFP-4864-RC)

Add:

Deduct:

Deduct:

36′′(914mm)

—

-$68

-$155

42′′(1067mm)

—

-74

-155

48′′(1219mm)

—

-80

-155

54′′(1372mm)

—

-86

-155

60′′(1524mm)

—

-92

-155

NOTES: • Powered panels with raceway covers ship with receptacle ports in the base raceway cover. Receptacle ports on the raceway cover measure 2.35 ′′(60mm) top-to-bottom and 2.88 ′′(73mm) side-to-side. • Powered panels with Power Distribution Assemblies (PDA) but without raceway covers require separately specified base raceway covers for power and communication port locations other than the standard powered base raceway cover. • New York City (NYC) electrical applications require field installation of PDA. • New York Port Authority (NYPA) electrical applications require metal raceway covers. To order, specify NYC powered panels without raceway cover and separately specify metal covers through Haworth e-Parts. • Some building codes may restrict the use of panel heights greater than 69 ′′(1753mm). Consult your local code authority to assure that the furniture layout is compliant.

112

April 2008 / USA

Class BA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

UniGroup Too Price List

Ported Monolithic Fabric Panel with Low Profile Steel Top Cap PLACES Actual Height Fabric Ported — One Port Right or Left

50′′(1270mm)

64′′(1626mm)

68′′(1727mm)

82′′(2083mm)

Width

Powered Number 1

Fabric Grade A B

C

D

E

F

G

36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm)

HFP-3650HFP-4250HFP-4850HFP-5450HFP-6050HFP-3664HFP-4264HFP-4864HFP-5464HFP-6064HFP-3668HFP-4268HFP-4868HFP-5468HFP-6068HFP-3682HFP-4282HFP-4882HFP-5482HFP-6082-

$1232 1304 1354 1422 1497 $1303 1373 1420 1507 1593 $1368 1445 1493 1577 1672 $1630 1730 1794 1873 1958

$1344 1416 1466 1534 1609 $1425 1495 1542 1629 1715 $1490 1567 1615 1699 1794 $1752 1852 1916 1995 2080

$1398 1470 1520 1588 1663 $1497 1567 1614 1701 1787 $1562 1639 1687 1771 1866 $1824 1924 1988 2067 2152

$1422 1494 1544 1612 1687 $1549 1619 1666 1753 1839 $1626 1703 1751 1835 1930 $1942 2042 2106 2185 2270

$1482 1554 1604 1672 1747 $1621 1691 1738 1825 1911 $1706 1783 1831 1915 2010 $2038 2138 2202 2281 2366

$1542 1614 1664 1732 1807 $1699 1769 1816 1903 1989 $1790 1867 1915 1999 2094 $2140 2240 2304 2581 2468

$1278 1350 1400 1468 1543 $1353 1423 1470 1557 1643 $1418 1495 1543 1627 1722 $1680 1780 1844 1923 2008

Class BA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

113

UniGroup Too Price List

Ported Monolithic Fabric Panel with Low Profile Steel Top Cap PLACES

Fabric Ported— One Port Each Side

HFP-1 (3-Circuit Powered) C

R

US

NOTES: Ports are back-to-back onthis panel. This panel has fabric/colorway restrictions, see systems fabrics/ color legend.

Features

Specification Tips

• Includes non-powered or powered panel assembly, low profile top cap, with or without one-piece base raceway cover, 1.6 hinge kits, side trim rails, leveling glides and carpet gripper; power distribution assembly/flex connector(s). .6 base raceway end caps are shipped with each panel. Order additional as necessary. • Acoustical panel surfaces. • Panel surfaces may have the same fabric on both sides or a different fabric on each side. • Panel thickness is 2′′(51mm). • Base raceway is 4′′(102mm) high. • Powered raceway with or without raceway cover requires modified catalog number and list price. • Powered panels are available for countries that utilize 120 volt 60 hertz electrical systems and U.S. configured plugs and outlets. • Shipped with unassembled top cap, base raceway cover and side trim rails. • Concealed 2′′(51mm) deep top raceway to store and route communication cables. • Cables are routed downward to ported opening above worksurface through internal, vertical panel frame rail. • Ported panels are only available as 3-circuit powered (both port location and base). Chicago and New York applications require modification of product number, see below. • Factory installed electrical power is routed upward to the ported openings from the base raceway. • A metal barrier, located inside the ported opening, shields electrical wires from communication cables. • Port option may be limited in New York City, consult your local code authority prior to specifying.

• For mixed fabric surfaces, price at higher fabric grade. • Panels will accept add-on panels up to a combined height of 82″(2083mm). For aesthetic consistency, specify PLACES add-on panels. • Flex connectors provided for powered monolithic panels accommodate straight in-line, inside 90°, and inside 120° conditions (if applicable). • Receptacles for powered panels must be specified separately. • Raceway cover must be separately specified for option -E (no raceway cover). • Additional base raceway end caps will need to be specified if finish post are not ordered. • When specifying two (2) colors, specify finish/color for the side with the port in the right-hand position first. Then specify finish/color for the other side. • Ported panels require separate specification of port cover plates, see Specification Guide.

To Order, Specify: 1) Product number. 2) Fabric/colorway for panel side one (right-hand port side). 3) Fabric/colorway for panel side two. 4) Trim color for raceway cover, glide housings and end caps. 5) Trim color for top cap and side trim rail.

Powered Panel with Base Raceway Cover, see opposite page. The following options require modification of the 3-Circuit Powered (Example: HFP-4864-1) product numbers and list prices shown on opposite page: 3-Circuit Powered without Base Raceway Cover (Example: HFP-4864-1E) or

Panel Width

NYC 3-Circuit Powered (Example: HFP-4864-1Y)

NYC 3-Circuit Powered without Base Raceway Cover (Example: HFP-4864-1YE)

Chicago Powered (Example: HFP-4864-1C)

Add:

Deduct:

Deduct:

36′′(914mm)

—

-$68

-$155

42′′(1067mm)

—

-74

-155

48′′(1219mm)

—

-80

-155

54′′(1372mm)

—

-86

-155

60′′(1524mm)

—

-92

-155

NOTES: • Powered panels with raceway covers ship with receptacle ports in the base raceway cover. Receptacle ports on the raceway cover measure 2.35 ′′(60mm) top-to-bottom and 2.88 ′′(73mm) side-to-side. • Powered panels with Power Distribution Assemblies (PDA) but without raceway covers require separately specified base raceway covers for power and communication port locations other than the standard powered base raceway cover. • New York City (NYC) electrical applications require field installation of PDA. • New York Port Authority (NYPA) electrical applications require metal raceway covers. To order, specify NYC powered panels without raceway cover and separately specify metal covers through Haworth e-Parts. • Some building codes may restrict the use of panel heights greater than 69 ′′(1753mm). Consult your local code authority to assure that the furniture layout is compliant.

114

April 2008 / USA

Class BA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

UniGroup Too Price List

Ported Monolithic Fabric Panel with Low Profile Steel Top Cap PLACES Actual Height Fabric Ported — One Ported Each Side

50′′(1270mm)

64′′(1626mm)

68′′(1727mm)

82′′(2083mm)

Width

Powered Number

Fabric Grade A B

C

D

E

F

G

36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm)

HFP-3650-1 HFP-4250-1 HFP-4850-1 HFP-5450-1 HFP-6050-1 HFP-3664-1 HFP-4264-1 HFP-4864-1 HFP-5464-1 HFP-6064-1 HFP-3668-1 HFP-4268-1 HFP-4868-1 HFP-5468-1 HFP-6068-1 HFP-3682-1 HFP-4282-1 HFP-4882-1 HFP-5482-1 HFP-6082-1

$1275 1347 1397 1465 1540 $1346 1416 1463 1550 1636 $1411 1488 1536 1620 1715 $1673 1773 1837 1916 2001

$1387 1459 1509 1577 1652 $1468 1538 1585 1672 1758 $1533 1610 1658 1742 1837 $1795 1895 1959 2038 2123

$1441 1513 1563 1631 1706 $1540 1610 1657 1744 1830 $1605 1682 1730 1814 1909 $1867 1967 2031 2110 2195

$1465 1537 1587 1655 1730 $1592 1662 1709 1796 1882 $1669 1746 1794 1878 1973 $1985 2085 2149 2228 2313

$1525 1597 1647 1715 1790 $1664 1734 1781 1868 1954 $1749 1826 1874 1958 2053 $2081 2181 2245 2324 2409

$1585 1657 1707 1775 1850 $1742 1812 1859 1946 2032 $1833 1910 1958 2042 2137 $2183 2283 2347 2624 2511

$1321 1393 1443 1511 1586 $1396 1466 1513 1600 1686 $1461 1538 1586 1670 1765 $1723 1823 1887 1966 2051

Class BA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

115

UniGroup Too Price List

Ported Monolithic Fabric Panel with Low Profile Steel Top Cap PLACES

Fabric Ported — Two Ports, Same Side

HFP-2 (3-Circuit Powered) C

R

US

NOTE: This panel has fabric/colorway restrictions, see systems fabrics/ color legend.

Features

Specification Tips

• Includes non-powered or powered panel assembly, low profile top cap, with or without one-piece base raceway cover, 1.6 hinge kits, side trim rails, leveling glides and carpet gripper; power distribution assembly/flex connector(s). .6 base raceway end caps are shipped with each panel. Order additional as necessary. • Acoustical panel surfaces. • Panel surfaces may have the same fabric on both sides or a different fabric on each side. • Panel thickness is 2′′(51mm). • Base raceway is 4′′(102mm) high. • Powered raceway with or without raceway cover requires modified catalog number and list price. • Powered panels are available for countries that utilize 120 volt 60 hertz electrical systems and U.S. configured plugs and outlets. • Shipped with unassembled top cap, base raceway cover and side trim rails. • Concealed 2′′(51mm) deep top raceway to store and route communication cables. • Cables are routed downward to ported opening above worksurface through internal, vertical panel frame rail. • Ported panels are only available as 3-circuit powered (both port location and base). Chicago and New York applications require modification of product number, see below. • Factory installed electrical power is routed upward to the ported openings from the base raceway. • A metal barrier, located inside the ported opening, shields electrical wires from communication cables. • Port option may be limited in New York City, consult your local code authority prior to specifying.

• For mixed fabric surfaces, price at higher fabric grade. • Panels will accept add-on panels up to a combined height of 82″(2083mm). For aesthetic consistency, specify PLACES add-on panels. • Flex connectors provided for powered monolithic panels accommodate straight in-line, inside 90°, and inside 120° conditions (if applicable). • Receptacles for powered panels must be specified separately. • Raceway cover must be separately specified for option -E (no raceway cover). • Additional base raceway end caps will need to be specified if finish post are not ordered. • When specifying two (2) colors, specify finish/color for the side with the ports first. Then specify finish/color for the other side. • Ported panels require separate specification of port cover plates, see Specification Guide.

To Order, Specify: 1) Product number. 2) Fabric/colorway for panel side one (ported side). 3) Fabric/colorway for panel side two. 4) Trim color for raceway cover, glide housings and end caps. 5) Trim color for top cap and side trim rails.

Powered Panel with Base Raceway Cover, see opposite page. The following options require modification of the 3-Circuit Powered (Example: HFP-4864-2) product numbers and list prices shown on opposite page: 3-Circuit Powered without Base Raceway Cover (Example: HFP-4864-2E) or

Panel Width

NYC 3-Circuit Powered (Example: HFP-4864-2Y)

NYC 3-Circuit Powered without Base Raceway Cover (Example: HFP-4864-2YE)

Chicago Powered (Example: HFP-4864-2C)

Add:

Deduct:

Deduct:

36′′(914mm)

—

-$68

-$155

42′′(1067mm)

—

-74

-155

48′′(1219mm)

—

-80

-155

54′′(1372mm)

—

-86

-155

60′′(1524mm)

—

-92

-155

NOTES: • Powered panels with raceway covers ship with receptacle ports in the base raceway cover. Receptacle ports on the raceway cover measure 2.35 ′′(60mm) top-to-bottom and 2.88 ′′(73mm) side-to-side. • Powered panels with Power Distribution Assemblies (PDA) but without raceway covers require separately specified base raceway covers for power and communication port locations other than the standard powered base raceway cover. • New York City (NYC) electrical applications require field installation of PDA. • New York Port Authority (NYPA) electrical applications require metal raceway covers. To order, specify NYC powered panels without raceway cover and separately specify metal covers through Haworth e-Parts. • Some building codes may restrict the use of panel heights greater than 69 ′′(1753mm). Consult your local code authority to assure that the furniture layout is compliant.

116

April 2008 / USA

Class BA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

UniGroup Too Price List

Ported Monolithic Fabric Panel with Low Profile Steel Top Cap PLACES Actual Height Fabric Ported — Two Ports, Same Side

50′′(1270mm)

64′′(1626mm)

68′′(1727mm)

82′′(2083mm)

Width

Powered Number

Fabric Grade A B

C

D

E

F

G

36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm)

HFP-3650-2 HFP-4250-2 HFP-4850-2 HFP-5450-2 HFP-6050-2 HFP-3664-2 HFP-4264-2 HFP-4864-2 HFP-5464-2 HFP-6064-2 HFP-3668-2 HFP-4268-2 HFP-4868-2 HFP-5468-2 HFP-6068-2 HFP-3682-2 HFP-4282-2 HFP-4882-2 HFP-5482-2 HFP-6082-2

$1292 1364 1414 1482 1557 $1363 1433 1480 1567 1653 $1428 1505 1553 1637 1732 $1690 1790 1854 1933 2018

$1404 1476 1526 1594 1669 $1485 1555 1602 1689 1775 $1550 1627 1675 1759 1854 $1812 1912 1976 2055 2140

$1458 1530 1580 1648 1723 $1557 1627 1674 1761 1847 $1622 1699 1747 1831 1926 $1884 1984 2048 2127 2212

$1482 1554 1604 1672 1747 $1609 1679 1726 1813 1899 $1686 1763 1811 1895 1990 $2002 2102 2166 2245 2330

$1542 1614 1664 1732 1807 $1681 1751 1798 1885 1971 $1766 1843 1891 1975 2070 $2098 2198 2262 2341 2426

$1602 1674 1724 1792 1867 $1759 1829 1876 1963 2049 $1850 1927 1975 2059 2154 $2200 2300 2364 2641 2528

$1338 1410 1460 1528 1603 $1413 1483 1530 1617 1703 $1478 1555 1603 1687 1782 $1740 1840 1904 1983 2068

Class BA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

117

UniGroup Too Price List

Ported Monolithic Fabric Panel with Low Profile Steel Top Cap PLACES

Fabric Ported — Four Ports, Two Each Side

HFP-4 (3-Circuit Powered) C

R

US

NOTES: Ports are back-to-back onthis panel. This panel has fabric/colorway restrictions, see systems fabrics/ color legend.

Features

Specification Tips

• Includes non-powered or powered panel assembly, low profile top cap, with or without one-piece base raceway cover, 1.6 hinge kits, side trim rails, leveling glides and carpet gripper; power distribution assembly/flex connector(s). .6 base raceway end caps are shipped with each panel. Order additional as necessary. • Acoustical panel surfaces. • Panel surfaces may have the same fabric on both sides or a different fabric on each side. • Panel thickness is 2′′(51mm). • Base raceway is 4′′(102mm) high. • Powered raceway with or without raceway cover requires modified catalog number and list price. • Powered panels are available for countries that utilize 120 volt 60 hertz electrical systems and U.S. configured plugs and outlets. • Shipped with unassembled top cap, base raceway cover and side trim rails. • Concealed 2′′(51mm) deep top raceway to store and route communication cables. • Cables are routed downward to ported opening above worksurface through internal, vertical panel frame rail. • Ported panels are only available as 3-circuit powered (both port location and base). Chicago and New York applications require modification of product number, see below. • Factory installed electrical power is routed upward to the ported openings from the base raceway. • A metal barrier, located inside the ported opening, shields electrical wires from communication cables. • Port option may be limited in New York City, consult your local code authority prior to specifying.

• For mixed fabric surfaces, price at higher fabric grade. • Panels will accept add-on panels up to a combined height of 82″(2083mm). For aesthetic consistency, specify PLACES add-on panels. • Flex connectors provided for powered monolithic panels accommodate straight in-line, inside 90°, and inside 120° conditions (if applicable). • Receptacles for powered panels must be specified separately. • Raceway cover must be separately specified for option -E (no raceway cover). • Additional base raceway end caps will need to be specified if finish post are not ordered. • Ported panels require separate specification of port cover plates, see Specification Guide.

To Order, Specify: 1) Product number. 2) Fabric/colorway for panel side one. 3) Fabric/colorway for panel side two. 4) Trim color for raceway cover, glide housings and end caps. 5) Trim color for top cap and side trim rails.

Powered Panel with Base Raceway Cover, see opposite page. The following options require modification of the 3-Circuit Powered (Example: HFP-4864-4) product numbers and list prices shown on opposite page: 3-Circuit Powered without Base Raceway Cover (Example: HFP-4864-4E) or

Panel Width

NYC 3-Circuit Powered (Example: HFP-4864-4Y)

NYC 3-Circuit Powered without Base Raceway Cover (Example: HFP-4864-4YE)

Chicago Powered (Example: HFP-4864-4C)

Add:

Deduct:

Deduct:

36′′(914mm)

—

-$68

-$155

42′′(1067mm)

—

-74

-155

48′′(1219mm)

—

-80

-155

54′′(1372mm)

—

-86

-155

60′′(1524mm)

—

-92

-155

NOTES: • Powered panels with raceway covers ship with receptacle ports in the base raceway cover. Receptacle ports on the raceway cover measure 2.35 ′′(60mm) top-to-bottom and 2.88 ′′(73mm) side-to-side. • Powered panels with Power Distribution Assemblies (PDA) but without raceway covers require separately specified base raceway covers for power and communication port locations other than the standard powered base raceway cover. • New York City (NYC) electrical applications require field installation of PDA. • New York Port Authority (NYPA) electrical applications require metal raceway covers. To order, specify NYC powered panels without raceway cover and separately specify metal covers through Haworth e-Parts. • Some building codes may restrict the use of panel heights greater than 69 ′′(1753mm). Consult your local code authority to assure that the furniture layout is compliant.

118

April 2008 / USA

Class BA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

UniGroup Too Price List

Ported Monolithic Fabric Panel with Low Profile Steel Top Cap PLACES Actual Height Fabric Ported — Four Ports, Two Each Side

50′′(1270mm)

64′′(1626mm)

68′′(1727mm)

82′′(2083mm)

Width

Powered Number

Fabric Grade A B

C

D

E

F

G

36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm)

HFP-3650-4 HFP-4250-4 HFP-4850-4 HFP-5450-4 HFP-6050-4 HFP-3664-4 HFP-4264-4 HFP-4864-4 HFP-5464-4 HFP-6064-4 HFP-3668-4 HFP-4268-4 HFP-4868-4 HFP-5468-4 HFP-6068-4 HFP-3682-4 HFP-4282-4 HFP-4882-4 HFP-5482-4 HFP-6082-4

$1455 1527 1577 1645 1720 $1526 1596 1643 1730 1816 $1591 1668 1716 1800 1895 $1853 1953 2017 2096 2181

$1567 1639 1689 1757 1832 $1648 1718 1765 1852 1938 $1713 1790 1838 1922 2017 $1975 2075 2139 2218 2303

$1621 1693 1743 1811 1886 $1720 1790 1837 1924 2010 $1785 1862 1910 1994 2089 $2047 2147 2211 2290 2375

$1645 1717 1767 1835 1910 $1772 1842 1889 1976 2062 $1849 1926 1974 2058 2153 $2165 2265 2329 2408 2493

$1705 1777 1827 1895 1970 $1844 1914 1961 2048 2134 $1929 2006 2054 2138 2233 $2261 2361 2425 2504 2589

$1765 1837 1887 1955 2030 $1922 1992 2039 2126 2212 $2013 2090 2138 2222 2317 $2363 2463 2527 2804 2691

$1501 1573 1623 1691 1766 $1576 1646 1693 1780 1866 $1641 1718 1766 1850 1945 $1903 2003 2067 2146 2231

Class BA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

119

UniGroup Too Price List

Open Frame Monolithic Panel with Low Profile Steel Top Cap PLACES

Open Frame

Features

Specification Tips

• Includes non-powered or powered panel assembly, low profile top cap, with or without one-piece base raceway cover, 1.6 hinge kits, side trim rails, leveling glides and carpet gripper; power distribution assembly/flex connector(s) when power is specified. .6 base raceway end caps are shipped with each panel. Order additional as necessary. • Base raceway is 4′′(102mm) high. • Powered raceway with or without raceway cover requires modified catalog number and list price. • Powered panels are available for countries that utilize 120 volt 60 hertz electrical systems and U.S. configured plugs and outlets. • Shipped with unassembled top cap, base raceway cover and side trim rails. • Does not accept top feed modules.

• Panels will accept glazed add-on panels up to a combined height of 82′′(2083mm). For aesthetic consistency, specify PLACES add-on panels. • Flex connectors provided for powered monolithic panels accommodate straight in-line, inside 90°, and inside 120° conditions (if applicable). • Receptacles for powered panels must be specified separately. • Raceway cover must be separately specified for option -E (no raceway cover). • Additional base raceway end caps will need to be specified if finish posts are not ordered.

To Order, Specify: 1) Product number. 2) Trim color for raceway cover, glide housings and end caps. 3) Trim color for frame, top cap and side trim rails.

HON (Non Powered)

C

R

HOP (3-Circuit Powered) HOP-6 (6-Circuit Powered)

US

Non-Powered Panel with Base Raceway Cover, see opposite page. The following options require modification of the 3-Circuit Non-Powered (Example: HON-4864) product numbers and list prices shown on opposite page:

Panel Width

Non-Powered without Base Raceway Cover (Example: HON-4864-E)

3-Circuit Powered without Base Raceway Cover (Example: HOP-4864-E)

6-Circuit Powered without Base Raceway Cover (Example: HOP-4864-6E)

or

or

3-Circuit Powered (Example: HOP-4864)

6-Circuit Powered (Example: HOP-4864-6)

or

or

NYC 3-Circuit Powered (Example: HOP-4864-Y)

NYC 6-Circuit Powered (Example: HOP-4864-6Y)

NYC 3-Circuit Powered without Base Raceway Cover (Example: HOP-4864-YE)

NYC 6-Circuit Powered without Base Raceway Cover (Example: HOP-4864-6YE)

Add:

Deduct:

Add:

Add:

Add:

12′′(305mm)

-$26

$155*

n/a

n/a

n/a

18′′(457mm)

-36

155

n/a

$107

n/a

24′′(610mm)

-44

155

$276

99

$220

30′′(762mm)

-46

155

276

96

217

36′′(914mm)

-50

155

276

87

208

42′′(1067mm)

-57

155

276

81

202

48′′(1219mm)

-60

155

276

75

196

54′′(1372mm)

-63

155

276

69

190

60′′(1524mm)

-69

155

276

63

184

*The 12 ′′-wide panel has a pass-through connector and a non-powered raceway cover.

NOTES: • Powered panels with raceway covers ship with receptacle ports in the base raceway cover. Receptacle ports on the raceway cover measure 2.35 ′′(60mm) top-to-bottom and 2.88 ′′(73mm) side-to-side. • Non-powered panels ship without receptacle ports in the base raceway cover. • Powered panels with Power Distribution Assemblies (PDA) but without raceway covers require separately specified base raceway covers for power and communication port locations other than the standard powered base raceway cover. • New York City (NYC) electrical applications require field installation of PDA. • New York Port Authority (NYPA) electrical applications require metal raceway covers. To order, specify NYC powered panels without raceway cover and separately specify metal covers through Haworth e-Parts. • Some building codes may restrict the use of panel heights greater than 69 ′′(1753mm). Consult your local code authority to assure that the furniture layout is compliant. • For International Power, specify non-powered panels and use Power Logic components. See Specification Guide for more information on Power Logic. • For Chicago power, specify non-powered panels without a base raceway cover and separately specify Chicago power retrofit kit.

120

April 2008 / USA

Class BA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

UniGroup Too Price List

Open Frame Monolithic Panel with Low Profile Steel Top Cap PLACES Actual Height Open Frame

44′′(1118mm)

50′′(1270mm)

64′′(1626mm)

68′′(1727mm)

82′′(2083mm)

Width

Non-Powered Number

Price

12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm)

HON-1244HON-1844HON-2444HON-3044HON-3644HON-4244HON-4844HON-5444HON-6044HON-1250HON-1850HON-2450HON-3050HON-3650HON-4250HON-4850HON-5450HON-6050HON-1264HON-1864HON-2464HON-3064HON-3664HON-4264HON-4864HON-5464HON-6064HON-1268HON-1868HON-2468HON-3068HON-3668HON-4268HON-4868HON-5468HON-6068HON-1282HON-1882HON-2482HON-3082HON-3682HON-4282HON-4882HON-5482HON-6082-

$ 466 508 558 608 653 711 805 877 946 $ 481 524 573 623 680 748 840 908 987 $ 505 547 601 663 733 803 891 960 1032 $ 538 588 641 701 784 852 946 1014 1104 $ 612 664 742 830 969 1019 1079 1159 1253

Class BA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

121

UniGroup Too Price List

Glazed Monolithic Panels with Low Profile Steel Top Cap PLACES

Glazed

Features

Specification Tips

• Includes non-powered or powered panel assembly, low profile top cap, with or without one-piece base raceway cover, 1.6 hinge kits, side trim rails, leveling glides and carpet gripper; power distribution assembly/flex connector(s) when power is specified. .6 base raceway end caps are shipped with each panel. Order additional as necessary. • Base raceway is 4′′(102mm) high. • Powered raceway with or without raceway cover requires modified catalog number and list price. • Powered panels are available for countries that utilize 120 volt 60 hertz electrical systems and U.S. configured plugs and outlets. • Shipped with unassembled top cap, base raceway cover and side trim rails. • Does not accept top feed modules.

• Panels will accept glazed add-on panels up to a combined height of 82′′(2083mm). For aesthetic consistency, specify PLACES add-on panels. • Glazed panels accept muntin kits and wainscot kits. • Flex connectors provided for powered monolithic panels accommodate straight in-line, inside 90°, and inside 120° conditions (if applicable). • Receptacles for powered panels must be specified separately. • Raceway cover must be separately specified for option -E (no raceway cover). • Additional base raceway end caps will need to be specified if finish posts are not ordered.

To Order, Specify: 1) Product number. 2) Glazing finish color.

HGN (Non Powered)

C

R

3) Trim color for raceway cover, glide housings and end caps.

HGP (3-Circuit Powered) HGP-6 (6-Circuit Powered)

4) Trim color for frame, top cap and side trim rails.

US

Non-Powered Panel with Base Raceway Cover, see opposite page. The following options require modification of the 3-Circuit Non-Powered (Example: HGN-4864) product numbers and list prices shown on opposite page:

Panel Width

Non-Powered without Base Raceway Cover (Example: HGN-4864-E)

3-Circuit Powered (Example: HGP-4864)

6-Circuit Powered (Example: HGP-4864-6)

or

or

NYC 3-Circuit Powered (Example: HGP-4864-Y)

3-Circuit Powered without Base Raceway Cover (Example: HGP-4864-E)

6-Circuit Powered without Base Raceway Cover (Example: HGP-4864-6E)

or

or

NYC 6-Circuit Powered (Example: HGP-4864-6Y)

NYC 3-Circuit Powered without Base Raceway Cover (Example: HGP-4864-YE)

NYC 6-Circuit Powered without Base Raceway Cover (Example: HGP-4864-6YE)

Add:

Deduct:

Add:

Add:

Add:

12′′(305mm)

-$26

$155*

n/a

n/a

n/a

18′′(457mm)

-36

155

n/a

$107

n/a

24′′(610mm)

-44

155

$276

99

$220

30′′(762mm)

-46

155

276

96

217

36′′(914mm)

-50

155

276

87

208

42′′(1067mm)

-57

155

276

81

202

48′′(1219mm)

-60

155

276

75

196

54′′(1372mm)

-63

155

276

69

190

60′′(1524mm)

-69

155

276

63

184

*The 12 ′′-wide panel has a pass-through connector and a non-powered raceway cover.

NOTES: • Powered panels with raceway covers ship with receptacle ports in the base raceway cover. Receptacle ports on the raceway cover measure 2.35 ′′(60mm) top-to-bottom and 2.88 ′′(73mm) side-to-side. • Non-powered panels ship without receptacle ports in the base raceway cover. • Powered panels with Power Distribution Assemblies (PDA) but without raceway covers require separately specified base raceway covers for power and communication port locations other than the standard powered base raceway cover. • New York City (NYC) electrical applications require field installation of PDA. • New York Port Authority (NYPA) electrical applications require metal raceway covers. To order, specify NYC powered panels without raceway cover and separately specify metal covers through Haworth e-Parts. • Some building codes may restrict the use of panel heights greater than 69 ′′(1753mm). Consult your local code authority to assure that the furniture layout is compliant. • For International Power, specify non-powered panels and use Power Logic components. See Specification Guide for more information on Power Logic. • For Chicago power, specify non-powered panels without a base raceway cover and separately specify Chicago power retrofit kit.

122

April 2008 / USA

Class BA – GSA: Open Market Canadian Conversion Factor: Refer to haworth.com/Canada

UniGroup Too Price List

Glazed Monolithic Panels with Low Profile Steel Top Cap PLACES Actual Height Glazed

44′′(1118mm)

50′′(1270mm)

64′′(1626mm)

68′′(1727mm)

82′′(2083mm)

Width

Non-Powered Number

Clear or Bronze Price

Frosted Price

12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm)

HGN-1244HGN-1844HGN-2444HGN-3044HGN-3644HGN-4244HGN-4844HGN-5444HGN-6044HGN-1250HGN-1850HGN-2450HGN-3050HGN-3650HGN-4250HGN-4850HGN-5450HGN-6050HGN-1264HGN-1864HGN-2464HGN-3064HGN-3664HGN-4264HGN-4864HGN-5464HGN-6064HGN-1268HGN-1868HGN-2468HGN-3068HGN-3668HGN-4268HGN-4868HGN-5468HGN-6068HGN-1282HGN-1882HGN-2482HGN-3082HGN-3682HGN-4282HGN-4882HGN-5482HGN-6082-

$ 646 726 810 904 993 1105 1208 1305 1406 $ 665 746 831 930 1034 1140 1233 1336 1434 $ 681 774 866 962 1066 1200 1290 1389 1504 $ 728 825 928 1016 1133 1282 1379 1479 1608 $ 835 985 1128 1237 1365 1537 1650 1765 1904

$ 800 880 964 1058 1232 1344 1447 1544 1645 $ 819 900 985 1084 1273 1379 1472 1575 1673 $ 876 969 1061 1157 1366 1500 1590 1689 1804 $ 923 1020 1123 1211 1433 1582 1679 1779 1908 $1030 1180 1323 1432 1665 1837 1950 2065 2204

Product marked with this symbol available as GSA open market.

Class BA – GSA: Open Market Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

123

UniGroup Too Price List

Monolithic Fabric Add-On Panel PLACES

Fabric

HAF

NOTES: This panel has fabric/colorway restrictions, see systems fabrics/ color legend. *Add-on panels cannot be used with add-on panels ordered with the SP** prefix.

124

April 2008 / USA

Features

To Order, Specify:

• Includes panel, vertical connector (bayonet), light block, side trim rails, two full hinge sets, side trim rail covers and top cap clips. • Fabric add-on panels may be installed above any straight fabric base or fabric add-on panels.* • Both sides in same fabric; one color or different color each side. • Each base panel will accept two add-on panels. • Lower Level add-on panel will accept overhead components (load bearing). Second add-on panel (top) is non-load bearing. • Top rail of add-on panel will provide top wire management. • Utilizes top cap from base panel. • Standard finish posts can be used. • Same construction as PLACES Monolithic fabric panel.

1) Product number.

Specification Tips • For mixed fabric surfaces, specify fabric/color for each fabric surface and price at higher grade. • Add-on panels may be stacked a maximum of two high in any order of height above a base panel. • Add-on panel must match panel width. • Combination of panel and add-on panel cannot exceed 82′′(2083mm) in height. • Cannot be used above any door, glazed, open-frame, or glazed add-on panels. • Base and add-on panel combinations should match existing base panel heights so that end-of-runs and finish posts can be used without field modification. • Full-height trim rails required for end-of-run conditions with a base panel and one add-on panel, separately specified. • For two high add-on panel applications specify separately full-height side trim rail for base panel and one high add on, for two high panel add on location use side trim rail that ships with add-on panel. • Clerestory can be added above fabric add-on panels.

Class BA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

2) Fabric/colorway for add-on panel side one. 3) Fabric/colorway for add-on panel side two. 4) Trim color for side trim rails and trim strip.

UniGroup Too Price List

Monolithic Fabric Add-On Panel PLACES Actual Height Fabric

12′′(305mm)

14′′(356mm)

18′′(437mm)

20′′(508mm)

24′′(610mm)

Width

Number

Fabric Grade A B

C

D

E

F

G

12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm)

HAF-1212 HAF-1812 HAF-2412 HAF-3012 HAF-3612 HAF-4212 HAF-4812 HAF-5412 HAF-6012 HAF-1214 HAF-1814 HAF-2414 HAF-3014 HAF-3614 HAF-4214 HAF-4814 HAF-5414 HAF-6014 HAF-1218 HAF-1818 HAF-2418 HAF-3018 HAF-3618 HAF-4218 HAF-4818 HAF-5418 HAF-6018 HAF-1220 HAF-1820 HAF-2420 HAF-3020 HAF-3620 HAF-4220 HAF-4820 HAF-5420 HAF-6020 HAF-1224 HAF-1824 HAF-2424 HAF-3024 HAF-3624 HAF-4224 HAF-4824 HAF-5424 HAF-6024

$434 480 507 532 557 582 607 621 632 $443 492 523 548 570 594 618 631 642 $490 557 582 607 632 656 684 695 714 $505 561 589 617 645 675 696 713 730 $595 621 644 668 693 719 744 757 769

$514 560 587 612 637 662 687 701 712 $523 572 603 628 650 674 698 711 722 $570 637 662 687 712 736 764 775 794 $585 641 669 697 725 755 776 793 810 $675 701 724 748 773 799 824 837 849

$524 570 597 622 647 672 697 711 722 $533 582 613 638 660 684 708 721 732 $580 647 672 697 722 746 774 785 804 $595 651 679 707 735 765 786 803 820 $685 711 734 758 783 809 834 847 859

$534 580 607 632 657 682 707 721 732 $543 592 623 648 670 694 718 731 742 $590 657 682 707 732 756 784 795 814 $605 661 689 717 745 775 796 813 830 $695 721 744 768 801 827 852 865 877

$548 594 621 646 671 696 721 735 746 $557 606 637 662 684 708 732 745 756 $604 671 696 721 746 770 798 809 828 $619 675 703 731 767 797 810 835 852 $709 735 758 782 831 857 882 895 907

$558 604 631 656 681 706 731 745 756 $567 616 647 672 694 718 742 755 766 $614 681 706 731 770 792 820 831 850 $629 685 713 741 795 825 846 863 880 $719 745 768 792 867 893 918 931 943

$474 520 547 572 597 622 647 661 672 $483 532 563 588 610 634 658 671 682 $530 597 622 647 672 696 724 735 754 $545 601 629 657 685 715 736 753 770 $635 661 684 708 733 759 784 797 809

Class BA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

125

UniGroup Too Price List

Monolithic Glazed Add-On Panel PLACES

Glazed

HAG

NOTE: *Add-on panels cannot be used with add-on panels ordered with the SP** prefix.

126

April 2008 / USA

Features

To Order, Specify:

• Includes panel, vertical connector (bayonet), light block, side trim rails, two full hinge sets, side trim rail cover, and top cap clips. • Utilizes top cap from base panel. • Glazed add-on panels may be installed above any straight fabric, glazed, or open-frame base or add-on panels.* • Each base panel will accept two add-on panels. • Glazed add-on panels will not accept any load bearing components. • Top rail of add-on panel will provide top wire management. • Glazing material for English Reeded, Checks Mix, and Vertical Moire is textured on one side only. Recommend installing the textured side to face the interior of the workstation. • Standard finish post and end-of-run posts can be used.

1) Product number, including:

Specification Tips • Specify glazed add-on panel based upon the type of panel, fabric (F) or glazed/open-frame (G), that will be directly below the add-on panel. • Add-on panels may be stacked a maximum of two high in any order of height above a base panel. • Add-on panel must match base panel width. • Combination of base panel and add-on panel cannot exceed 82′′(2083mm) in height. • Base and add-on panel combinations should match existing base panel heights so that end-of-runs and finish posts can be used without field modification. • Cannot be used above doors. • Does not accept top feed modules. • Glazed add-on panels may be retrofitted in the field for use on glazed or fabric base panels. A retrofit kit is available as a service part. • Full-height trim rails required for end-of-run conditions with a base panel and one add-on panel, separately specified. • For two high add-on panel applications specify separately full-height side trim rail for base panel and one high add on, for two high panel add on location use side trim rail that ships with add-on panel. • Clerestory can be added above glazed add-on panels.

Class BA – GSA: Open Market Canadian Conversion Factor: Refer to haworth.com/Canada

1 Application Designation: F

Glazed add-on panel directly above fabric base panel or fabric add-on panel.

G Glazed add-on panel directly above glazed and open frame base panel or glazed add-on panel, add $23 list. 2) Glazing color or glass pattern. 3) Trim color for frame, side trim rails and trim strip.

UniGroup Too Price List

Monolithic Glazed Add-On Panel PLACES Actual Height Glazed

12′′(305mm)

14′′(356mm)

18′′(457mm)

20′′(508mm)

24′′(610mm)

Width

Number 1

Clear/Bronze/ Frosted Price

English Reeded Price

Checks Mix/ Vertical Moire Price

12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm)

HAG-1212HAG-1812HAG-2412HAG-3012HAG-3612HAG-4212HAG-4812HAG-5412HAG-6012HAG-1214HAG-1814HAG-2414HAG-3014HAG-3614HAG-4214HAG-4814HAG-5414HAG-6014HAG-1218HAG-1818HAG-2418HAG-3018HAG-3618HAG-4218HAG-4818HAG-5418HAG-6018HAG-1220HAG-1820HAG-2420HAG-3020HAG-3620HAG-4220HAG-4820HAG-5420HAG-6020HAG-1224HAG-1824HAG-2424HAG-3024HAG-3624HAG-4224HAG-4824HAG-5424HAG-6024-

$471 519 547 572 596 622 646 667 685 $483 532 561 587 609 633 657 678 699 $529 596 622 646 671 696 722 734 754 $545 601 629 656 685 714 735 764 790 $634 660 684 708 733 758 784 809 827

NA NA $ 669 706 738 794 871 NA 933 NA NA NA NA NA NA NA NA NA NA NA $ 697 735 773 829 910 NA 1000 NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA

NA NA $ 771 808 842 909 1000 NA 1084 NA NA NA NA NA NA NA NA NA NA NA $ 804 841 878 947 1045 NA 1167 NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA

Product marked with this symbol available as GSA open market.

Class BA – GSA: Open Market Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

127

UniGroup Too Price List

Doors with Low Profile Steel Top Cap PLACES Actual Height Single Door— Laminate

82′′(2083mm)

Width

Door Swing

Number 1

36′′(914mm) 42′′(1067mm)

Left Left

HDS-3682HDS-4282-

$2053 $2279

Features

To Order, Specify:

• Includes complete panel assembly [hinge sets, carpet gripper, door jamb, side trim rails, leveling glides and trim, hollow core door (1 5/8′′(41mm) thick), door hinges, hardware, brushed chrome knobs or ADA lever with lockset and keys, and threshold]. • Both sides of door covered in same laminate surface color. • Door shipped with left-hand swing and can be field-changed for right-hand swing. • 1′′(25mm) deep top communications raceway. • No power and communications in base raceway.

1) Product number, including:

1 Handle Designation: K Knob H ADA lever, add $145 list. 2) Laminate surface color. 3) Trim color for raceway covers and glide housings.

Specification Tips

4) Trim color for door jamb, top cap and side trim rails.

• Door may be placed a maximum of 24′′(610mm) from supporting panels at 90°. • Will not accept add-on panel.

NOTES: Some building codes may restrict the use of panel heights greater than 69 ′′(1753mm). Consult your local code authority to assure that the furniture layout is compliant prior to installation.

Door Opening Clearance

HDS-L

Price L L

Door Size

Height

Width

3682

78 1/2′′(1994mm)

28 1/2′′(724mm)

4282

78 1/2′′(1994mm)

34 1/2′′(876mm)

Most building codes for new buildings require a minimum clear door width of 32 ′′(813mm). To meet this requirement, the 42 ′′(1067mm) door must be ordered.

(Left-hand swing)

Single Door — Glazed

Actual Height 82′′(2083mm)

Width

Number 1 2

Clear or Bronze Price

Frosted Price

36′′(914mm) 42′′(1067mm)

HDG-3682HDG-4282-

$2349 $2514

$2649 $2814

Features

To Order, Specify:

• Includes complete panel assembly [hinge sets, carpet gripper, door jamb, side trim rails, leveling glides and trim, hollow core door (1 5/8′′(41mm) thick), door hinges, hardware, brushed chrome knobs or ADA lever with lockset and keys, and threshold]. • Both sides of door covered in same laminate surface color. • High-pressure laminate door surface. • Door swing not field changeable. • 1′′(25mm) deep top communications raceway. • No power and communications in base raceway.

1) Product number, including:

1 Handle Designation: K Knob H ADA lever, add $145 list.

2 Door Swing L

Left-hand

R Right-hand

Specification Tips • Door may be placed a maximum of 24′′(610mm) from supporting panels at 90°. • Will not accept add-on panel.

Door Opening Clearance HDG-L HDG-R

(Left-hand swing)

Door Size

Height

Width

3682

78 1/2′′(1994mm)

28 1/2′′(724mm)

4282

78 1/2′′(1994mm)

34 1/2′′(876mm)

2) Glazing finish color. 3) Laminate surface color. 4) Trim color for raceway covers and glide housings. 5) Trim color for door jamb, top cap and side trim rails.

NOTES: Some building codes may restrict the use of panel heights greater than 69 ′′(1753mm). Consult your local code authority to assure that the furniture layout is compliant prior to installation.

(Right-hand swing)

Most building codes for new buildings require a minimum clear door width of 32 ′′(813mm). To meet this requirement, the 42 ′′(1067mm) door must be ordered.

128

April 2008 / USA

Class BA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

UniGroup Too Price List

Doors with Low Profile Steel Top Cap PLACES Actual Height Single Door — Glazed with Classic Muntins

82′′(2083mm)

Width

Number

36′′(914mm) 42′′(1067mm)

HDMC-3682HDMC-4282-

1 2

$2694 $2881

$2994 $3181

To Order, Specify:

• Includes complete panel assembly [hinge sets, carpet gripper, door jamb, side trim rails, leveling glides and trim, hollow core door (1 5/8′′(41mm) thick), door hinges, hardware, brushed chrome knobs or ADA lever with lockset and keys, and threshold]. • Both sides of door covered in same laminate surface color. • Door swing not field changeable. • 1′′(25mm) deep top communications raceway. • No power and communications in base raceway.

1) Product number, including:

1 Handle Designation: K Knob H ADA lever, add $145 list.

2 Door Swing L

Left-hand

R Right-hand

• Door may be placed a maximum of 24′′(610mm) from supporting panels at 90°. • Will not accept add-on panel.

2) Glazing finish color. 3) Laminate surface color. 4) Trim color for raceway covers and glide housings.

Door Opening Clearance Door Size

Height

Width

3682

78 1/2′′(1994mm)

28 1/2′′(724mm)

4282

78 1/2′′(1994mm)

34 1/2′′(876mm)

5) Trim color for door jamb, top cap, muntins and side trim rails.

NOTE:

HDMC-L HDMC-R

Some building codes may restrict the use of panel heights greater than 69 ′′(1753mm). Consult your local code authority to assure that the furniture layout is compliant prior to installation. (Right-hand swing)

Single Door — Glazed with Horizontal Muntins

Most building codes for new buildings require a minimum clear door width of 32 ′′(813mm). To meet this requirement, the 42 ′′(1067mm) door must be ordered.

Actual Height 82′′(2083mm)

Width

Number

36′′(914mm) 42′′(1067mm)

HDMH-3682HDMH-4282-

Clear or Bronze Price

Frosted Price

$2618 $2793

$2918 $3093

To Order, Specify:

• Includes complete panel assembly [hinge sets, carpet gripper, door jamb, side trim rails, leveling glides and trim, hollow core door (1 5/8′′(41mm) thick), door hinges, hardware, brushed chrome knobs or ADA lever with lockset and keys, and threshold]. • Both sides of door covered in same laminate surface color. • Door swing not field changeable. • 1′′(25mm) deep top communications raceway. • No power and communications in base raceway.

1) Product number, including:

1 Handle Designation: K Knob H ADA lever, add $145 list.

2 Door Swing L

Left-hand

R Right-hand

• Door may be placed a maximum of 24′′(610mm) from supporting panels at 90°. • Will not accept add-on panel.

2) Glazing finish color. 3) Laminate surface color. 4) Trim color for raceway covers and glide housings.

Door Opening Clearance HDMH-L HDMH-R

1 2

Features

Specification Tips

(Left-hand swing)

Frosted Price

Features

Specification Tips

(Left-hand swing)

Clear or Bronze Price

Door Size

Height

Width

3682

78 1/2′′(1994mm)

28 1/2′′(724mm)

4282

78 1/2′′(1994mm)

34 1/2′′(876mm)

5) Trim color for door jamb, top cap, muntins and side trim rails.

NOTE: Some building codes may restrict the use of panel heights greater than 69 ′′(1753mm). Consult your local code authority to assure that the furniture layout is compliant prior to installation.

(Right-hand swing)

Most building codes for new buildings require a minimum clear door width of 32 ′′(813mm). To meet this requirement, the 42 ′′(1067mm) door must be ordered.

Class BA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

129

UniGroup Too Price List

if Panel Attached Screen PLACES

if Panel Attached Screen

Height

Width

Description

Number

Price

47′′(1194mm) 52′′(1321mm) 63′′(1600mm) 47′′(1194mm) 52′′(1321mm) 63′′(1600mm) 52′′(1321mm) 63′′(1600mm)

48′′(1219mm)

Fabric

48′′(1219mm)

Frosted Insert

48′′(1219mm)

Perforated Metal

BBP-4748-FH BBP-5248-FH BBP-6348-FH BBP-4748-GH BBP-5248-GH BBP-6348-GH BBP-5248-PH BBP-6348-PH

$ 815 860 906 $ 999 1058 1116 $1087 1146

Features

To Order, Specify:

• Includes screen, two non-locking casters on post legs and attachment brackets. • Fabric and perforated metal insert screens have no acoustical or tackable value. • Screens are non-load bearing. • Magnets can be used with perforated metal inserts. • Frosted insert is identical to frosted and textured acrylic material used in if desktop screens. • Brackets are shipped unassembled.

BBP-FH BBP-GH BBP-PH

Fabric Insert 1) Product number. 2) Screen fabric insert color. FB-1 Warm Neutral FB-2 Cool Neutral 3) Metallic trim color for frame. 4) Trim color for panel attachment brackets. 5) Trim color for casters.

Specification Tips • Screens can mount on any width panel but panel runs must be at least 48′′(1219mm). • Screens mount on a panel taller than height of screen only. • Screen adds 2′′(51mm) to panel width in stored position. • Screen extends 42′′(1067mm) from end of panel in fully extended position. • Screens mount parallel with panel, off panel end only. • Screen adds 2′′(51mm) to panel thickness. • Panel attached screen brackets may interfere with components mounted to opposite side of panel. • Fabric screen insert available in warm and cool neutral only. • Screens are non-handed; brackets can be attached to either side. • See Specification Guide for additional information.

Frosted Insert 1) Product number. 2) Trim color for frame. 3) Trim color for panel attachment brackets. 4) Metal trim color for casters.

Metal Insert 1) Product number. 2) Trim color for frame. 3) Trim color for perforated metal insert. 4) Trim color for panel attachment brackets. 5) Metallic trim color for casters.

130

April 2008 / USA

Class IF – SIN 711-1; Discount Group XI Canadian Conversion Factor: Refer to haworth.com/Canada

UniGroup Too Price List

Panel Accessories PLACES

Muntin Kit — Classic — Painted

Panel Height

Panel Width

Number

Price

44′′(1118mm)

18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm)

MSC-1842 MSC-242 MSC-3042 MSC-342 MSC-4242 MSC-442 MSC-5442 MSC-542 MSC-1866 MSC-266 MSC-3066 MSC-366 MSC-4266 MSC-466 MSC-5466 MSC-566 MSC-1880 MSC-280 MSC-3080 MSC-380 MSC-4280 MSC-480 MSC-5480 MSC-580

$350 353 387 390 433 436 454 458 $391 394 433 436 486 489 507 510 $421 425 467 470 524 527 551 554

68′′(1727mm)

82′′(2083mm)

MSC

Features

To Order, Specify:

• Includes set of muntins for each side of glazed panel, and attachment hardware. • Requires field assembly. • Apply to glazed panels in heights and widths listed. • Muntins are 1/2′′(12mm) thick.

1) Product number. 2) Trim color.

Specification Tips • Glazed panel must be separately specified. • Applicable to UniGroup and PLACES glazed panels.

Muntin Kit — Horizontal — Painted

44′′(1118mm)

12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm)

68′′(1727mm)

82′′(2083mm)

MSH

MSH-142 MSH-1842 MSH-242 MSH-3042 MSH-342 MSH-4242 MSH-442 MSH-5442 MSH-542 MSH-166 MSH-1866 MSH-266 MSH-3066 MSH-366 MSH-4266 MSH-466 MSH-5466 MSH-566 MSH-180 MSH-1880 MSH-280 MSH-3080 MSH-380 MSH-4280 MSH-480 MSH-5480 MSH-580

Features

To Order, Specify:

• Includes set of muntins for each side of glazed panel, and attachment hardware. • Requires field assembly. • Apply to glazed panels in heights and widths listed. • Muntins are 1/2′′(12mm) thick.

1) Product number.

$181 261 300 320 331 361 377 387 394 $222 318 353 374 390 422 436 453 458 $240 347 383 411 423 455 471 491 500

2) Trim color.

Specification Tips • Glazed panel must be separately specified. • Applicable to UniGroup and PLACES glazed panels.

Class BA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

131

UniGroup Too Price List

Panel Accessories PLACES

Wainscot Kit Painted Rail — Fabric Panel

Installed Height

Panel Width

Number

Price

30′′(762mm)

12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm)

WK-129 WK-1829 WK-229 WK-3029 WK-329 WK-4229 WK-429 WK-5429 WK-529

$268 285 293 308 315 330 337 344 352

Features

To Order, Specify:

• Includes set of two (2) recessed fabric panels (1 for each side), two (2) rails, and attachment hardware. • Requires field assembly. • Apply to both sides of any glazed panel. • For mixed fabric surfaces, specify fabric/color for each side.

1) Product number.

Specification Tips

2) Fabric/colorway for panel side one. 3) Fabric/colorway for panel side two. 4) Rail trim color. $23 upcharge (list) for Metallic trim color.

• Glazed panel must be separately specified. • Can be used with UniGroup Too, UniGroup and PLACES glazed panels.

WK

Wainscot with Horizontal Muntins — Painted Rail and Muntins — Fabric Panel

68′′(1727mm)

82′′(2083mm)

12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm)

WMSH-166 WMSH-1866 WMSH-266 WMSH-3066 WMSH-366 WMSH-4266 WMSH-466 WMSH-5466 WMSH-566 WMSH-180 WMSH-1880 WMSH-280 WMSH-3080 WMSH-380 WMSH-4280 WMSH-480 WMSH-5480 WMSH-580

$492 602 657 691 720 757 792 814 827 $517 621 689 727 757 792 820 847 861

18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm)

WMSC-1866 WMSC-266 WMSC-3066 WMSC-366 WMSC-4266 WMSC-466 WMSC-5466 WMSC-566 WMSC-1880 WMSC-280 WMSC-3080 WMSC-380 WMSC-4280 WMSC-480 WMSC-5480 WMSC-580

$696 720 759 785 832 860 885 902 $718 741 783 810 858 888 912 931

WMSH

Wainscot with Classic Muntins 68′′(1727mm) Painted — Rail and Muntins — Fabric Panel

82′′(2083mm)

WMSC

Common Features

To Order, Specify:

• Includes set of two (2) recessed fabric panels (1 for each side), two (2) rails, set of muntins for each side, and attachment hardware. • Requires field assembly. • Apply to both sides of glazed panels in sizes listed. • For mixed fabric surfaces, specify fabric/color for each side.

1) Product number.

Specification Tips • Glazed panel must be separately specified. • Can be used with UniGroup and PLACES glazed panels.

132

April 2008 / USA

Class BA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

2) Fabric/colorway for panel side one. 3) Fabric/colorway for panel side two. 4) Rail/muntin trim color.

UniGroup Too Price List

Panel Accessories PLACES Actual Height 90° Finish Post — Low Profile 30′′(762mm) Wood Top Cap — Wood Surface 37′′(940mm)

Width

Number

Price

2′′(51mm)

HWPC-0030-T HWPC-0037-T HWPC-0044-T HWPC-0050-T HWPC-0056-T HWPC-0064-T HWPC-0068-T HWPC-0082-T

$162 168 176 182 183 184 195 198

44′′(1118mm) 50′′(1270mm) 56′′(1422mm) 64′′(1626mm) 68′′(1727mm) 82′′(2083mm)

Features

To Order, Specify:

• Includes 90° wood vertical cover, low profile wood top cap and base raceway cover. • Required by UL for covering base raceway flexible and straight-span power connectors when power connector covers are not used. • Finish posts are required for wood top cap panel configurations.

1) Product number. 2) Fabric surface and color. 3) Trim color for raceway cover. 4) Wood finish color for top cap.

HWPC-T

90° Finish Post — Low Profile Wood Top Cap — Fabric Surface

30′′(762mm) 37′′(940mm) 44′′(1118mm) 50′′(1270mm) 56′′(1422mm) 64′′(1626mm) 68′′(1727mm) 82′′(2083mm)

2′′(51mm)

HFPC-0030-T HFPC-0037-T HFPC-0044-T HFPC-0050-T HFPC-0056-T HFPC-0064-T HFPC-0068-T HFPC-0082-T

Features

To Order, Specify:

• Includes 90° fabric vertical cover, low profile wood top cap and base raceway cover. • Required by UL for covering base raceway flexible and straight-span power connectors when power connector covers are not used. • Finish posts are required for wood top cap panel configurations.

1) Product number.

$102 105 112 114 116 117 124 126

2) Fabric surface and color. 3) Trim color for raceway cover. 4) Wood finish color for top cap.

HFPC-T

90° Finish Post — Low Profile 30′′(762mm) Steel Top Cap — Fabric Surface 37′′(940mm)

2′′(51mm)

44′′(1118mm) 50′′(1270mm) 56′′(1422mm) 64′′(1626mm) 68′′(1727mm) 82′′(2083mm)

HFPC-0030 HFPC-0037 HFPC-0044 HFPC-0050 HFPC-0056 HFPC-0064 HFPC-0068 HFPC-0082

Features

To Order, Specify:

• Includes 90° fabric vertical cover, low profile steel top cap and base raceway cover. • Required by UL for covering base raceway flexible and straight-span power connectors when power connector covers are not used.

1) Product number.

$ 76 79 83 87 89 91 97 100

2) Fabric surface and color. 3) Trim color for raceway cover. 4) Trim color for top cap.

HFPC

Class BA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

133

UniGroup Too Price List

Panel Accessories PLACES Actual Height 90° Finish Post — Low Profile Steel Top Cap — Painted Surface

30′′(762mm) 37′′(940mm) 44′′(1118mm) 50′′(1270mm) 56′′(1422mm) 64′′(1626mm) 68′′(1727mm) 82′′(2083mm)

Width

Number

Price

2′′(51mm)

HDPC-0030 HDPC-0037 HDPC-0044 HDPC-0050 HDPC-0056 HDPC-0064 HDPC-0068 HDPC-0082

$74 77 81 85 87 89 95 98

Features

To Order, Specify:

• Includes 90° painted vertical cover, low profile steel top cap and base raceway cover. • Required by UL for covering base raceway flexible and straight-span power connectors when power connector covers are not used.

1) Product number. 2) Painted surface color. 3) Trim color for raceway cover. 4) Trim color for top cap.

HDPC

Class BA

90° Power Connector Cover — Radius Profile

4′′(102mm)

PCC-90-B

Features

To Order, Specify:

• Includes six (6) covers. • Required by UL for covering flexible power connector in 90° panel configurations when finish post is not used.

1) Product number.

$55

2) Trim color.

Specification Tip • For use with UniGroup and PLACES.

PCC-90-B

Class AA

120° Finish Post — Low Profile 44′′(1118mm) Steel Top Cap — Fabric Surface 64′′(1626mm)

2′′(51mm)

68′′(1727mm)

SPLA-1270 SPLA-3945 SPLA-1272

Features

To Order, Specify:

• Includes 120° fabric vertical cover, low profile steel top cap and base raceway cover. • Required by UL for covering raceway flexible and straight-span power connectors when power connector covers are not used.

1) Product number.

$235 240 245

2) Fabric surface and color. 3) Trim color for raceway cover. 4) Trim color for top cap.

SPLA-1270

Class BA

180° Finish Post — Low Profile 30′′(762mm) Wood Top Cap — Wood Surface 37′′(940mm)

2′′(51mm)

44′′(1118mm) 50′′(1270mm) 56′′(1422mm) 64′′(1626mm) 68′′(1727mm) 82′′(2083mm)

Features

To Order, Specify:

• Includes 180° wood vertical cover, low profile wood top cap and base raceway cover. • Required by UL for covering base raceway flexible and straight-span power connectors when power connector covers are not used. • Finish post are required for wood top cap panel configurations.

1) Product number.

HWPS-T

Class BA

134

April 2008 / USA

HWPS-0030-T HWPS-0037-T HWPS-0044-T HWPS-0050-T HWPS-0056-T HWPS-0064-T HWPS-0068-T HWPS-0082-T

SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

2) Wood finish color for post surface. 3) Trim color for raceway cover. 4) Wood finish color for top cap.

$155 166 172 188 189 190 197 211

UniGroup Too Price List

Panel Accessories PLACES Actual Height 180° Finish Post — Low Profile Wood Top Cap — Fabric Surface

180° Finish Post — Low Profile Steel Top Cap— Fabric Surface

Number

Price

2′′(51mm)

HFPS-0030-T HFPS-0037-T HFPS-0044-T HFPS-0050-T HFPS-0056-T HFPS-0064-T HFPS-0068-T HFPS-0082-T

$111 121 135 140 143 145 151 160

Features

To Order, Specify:

• Includes 180° fabric vertical cover, low profile wood top cap and base raceway cover. • Required by UL for covering base raceway flexible and straight-span power connectors when power connector covers are not used. • Finish posts are required for wood top cap panel configurations.

1) Product number. 2) Fabric surface and color. 3) Trim color for raceway cover. 4) Wood finish color for top cap.

30′′(762mm) 37′′(940mm) 44′′(1118mm) 50′′(1270mm) 56′′(1422mm) 64′′(1626mm) 68′′(1727mm) 82′′(2083mm)

2′′(51mm)

HFPS-0030 HFPS-0037 HFPS-0044 HFPS-0050 HFPS-0056 HFPS-0064 HFPS-0068 HFPS-0082

Features

To Order, Specify:

• Includes 180° fabric vertical cover, low profile steel top cap and base raceway cover. • Required by UL for covering base raceway flexible and straight-span power connectors when power connector covers are not used.

1) Product number.

$64 70 74 79 82 84 87 95

2) Fabric surface and color. 3) Trim color for raceway cover. 4) Trim color for top cap.

Class BA

180° Finish Post — Low Profile Steel Top Cap— Painted Surface

HDPS

Width

Class BA

HFPS-T

HFPS

30′′(762mm) 37′′(940mm) 44′′(1118mm) 50′′(1270mm) 56′′(1422mm) 64′′(1626mm) 68′′(1727mm) 82′′(2083mm)

30′′(762mm) 37′′(940mm) 44′′(1118mm) 50′′(1270mm) 56′′(1422mm) 64′′(1626mm) 68′′(1727mm) 82′′(2083mm)

2′′(51mm)

HDPS-0030 HDPS-0037 HDPS-0044 HDPS-0050 HDPS-0056 HDPS-0064 HDPS-0068 HDPS-0082

Features

To Order, Specify:

• Includes 180° painted vertical cover, low profile steel top cap and base raceway cover. • Required by UL for covering base raceway flexible and straight-span power connectors when power connector covers are not used.

1) Product number.

$62 68 72 77 80 82 85 93

2) Painted surface trim color. 3) Trim color for raceway cover. 4) Trim color for top cap.

Class BA

180° Power Connector Cover

PCC-180-B

Class AA

4′′(102mm)

PCC-180-B

Features

To Order, Specify:

• Includes six (6) covers. • Required by UL for covering straight-span or flexible power connectors in 180°, three-way panel configurations when finish post is not used.

1) Product number.

$55

2) Trim color.

Specification Tip • For use with UniGroup Too, UniGroup and PLACES panels. SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

135

UniGroup Too Price List

Panel Accessories PLACES Actual Height End-of-Run Finish Post — Low 30′′(762mm) Profile Wood Top Cap — Wood 37′′(940mm) Surface 44′′(1118mm)

Width

Number

Price

2′′(51mm)

HWER-0030-T HWER-0037-T HWER-0044-T HWER-0050-T HWER-0056-T HWER-0064-T HWER-0068-T HWER-0082-T

$113 118 123 140 154 167 181 218

50′′(1270mm) 56′′(1422mm) 64′′(1626mm) 68′′(1727mm) 82′′(2083mm)

Features

To Order, Specify:

• Includes end-of-run wood vertical cover, low profile wood top cap and base raceway cover. • Required whenever metal side rail is exposed at end of panel run. • Finish posts are required for wood top cap panel configurations.

1) Product number. 2) Wood finish color. 3) Trim color for raceway cover. 4) Wood finish color for top cap.

HWER-T

End-of-Run Finish Post — Low 30′′(762mm) Profile Wood Top Cap — Fabric 37′′(940mm) Surface 44′′(1118mm)

2′′(51mm)

50′′(1270mm) 56′′(1422mm) 64′′(1626mm) 68′′(1727mm) 82′′(2083mm)

HFER-0030-T HFER-0037-T HFER-0044-T HFER-0050-T HFER-0056-T HFER-0064-T HFER-0068-T HFER-0082-T

Features

To Order, Specify:

• Includes end-of-run fabric vertical cover, low profile wood top cap and base raceway cover. • Required whenever metal side rail is exposed at end of panel run. • Finish posts are required for wood top cap panel configurations.

1) Product number.

$ 86 89 95 106 118 130 138 169

2) Fabric surface and color. 3) Trim color for raceway cover. 4) Wood finish color for top cap.

HFER-T

End-of-Run Finish Post — Low 30′′(762mm) Profile Steel Top Cap — Fabric 37′′(940mm) Surface 44′′(1118mm)

2′′(51mm)

56′′(1270mm) 56′′(1422mm) 64′′(1626mm) 68′′(1727mm) 82′′(2083mm)

HPER-0030 HPER-0037 HPER-0044 HPER-0050 HPER-0056 HPER-0064 HPER-0068 HPER-0082

Features

To Order, Specify:

• Includes end-of-run fabric vertical cover, low profile steel top cap and base raceway cover. • Attaches to panel side rail at end of panel run.

1) Product number. 2) Fabric surface and color. 3) Trim color for raceway cover. 4) Trim color for top cap.

HPER

136

April 2008 / USA

Class BA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

$ 84 88 95 100 112 124 132 142

UniGroup Too Price List

Panel Accessories PLACES Actual Height End-of-Run Variable Height Finish Post — Coped — Low Profile Wood Top Cap — Wood Surface

HVWE-C

4′′(102mm) 6′′(152mm) 7′′(178mm) 8′′(203mm) 12′′(305mm) 13′′(330mm) 14′′(356mm) 18′′(457mm) 19′′(483mm) 20′′(508mm) 24′′(610mm) 26′′(660mm) 27′′(686mm) 31′′(787mm) 32′′(813mm) 34′′(864mm) 38′′(965mm) 45′′(1143mm) 52′′(1321mm)

Width

Number

Price

2′′(51mm)

HVWE-0004-C HVWE-0006-C HVWE-0007-C HVWE-0008-C HVWE-0012-C HVWE-0013-C HVWE-0014-C HVWE-0018-C HVWE-0019-C HVWE-0020-C HVWE-0024-C HVWE-0026-C HVWE-0027-C HVWE-0031-C HVWE-0032-C HVWE-0034-C HVWE-0038-C HVWE-0045-C HVWE-0052-C

$ 68 72 74 75 91 93 94 108 112 113 123 136 137 144 145 149 154 169 192

Features

To Order, Specify:

• Includes end-of-run wood vertical cover with coped end and low profile wood top cap. • Required on exposed portion of taller panel side rail where two panels of different heights meet. • Bottom of post is shaped to fit curve of top cap. • For straight panel line applications only. • Finish posts are required for wood top cap panel configurations.

1) Product number. 2) Wood finish color for post. 3) Wood finish color for top cap.

Specification Tip • Use for in-line panel applications.

End-of-Run Variable Height Finish Post — Coped — Low Profile Wood Top Cap — Fabric Surface

HVFE-C

4′′(102mm) 6′′(152mm) 7′′(178mm) 8′′(203mm) 12′′(305mm) 13′′(330mm) 14′′(356mm) 18′′(457mm) 19′′(483mm) 20′′(508mm) 24′′(610mm) 26′′(660mm) 27′′(686mm) 31′′(787mm) 32′′(813mm) 34′′(864mm) 38′′(965mm) 45′′(1143mm) 52′′(1321mm)

2′′(51mm)

HVFE-0004-C HVFE-0006-C HVFE-0007-C HVFE-0008-C HVFE-0012-C HVFE-0013-C HVFE-0014-C HVFE-0018-C HVFE-0019-C HVFE-0020-C HVFE-0024-C HVFE-0026-C HVFE-0027-C HVFE-0031-C HVFE-0032-C HVFE-0034-C HVFE-0038-C HVFE-0045-C HVFE-0052-C

Features

To Order, Specify:

• Includes end-of-run fabric vertical cover with coped end and low profile wood top cap. • Required on exposed portion of taller panel side rail where two panels of different heights meet. • Bottom of post is shaped to fit curve of top cap. • For straight panel line applications only. • Finish posts are required for wood top cap panel configurations.

1) Product number.

$ 41 48 50 51 62 63 73 82 85 87 96 103 104 117 118 121 125 127 144

2) Fabric surface and color. 3) Wood finish color for top cap.

Specification Tip • Use for in-line panel applications. Class BA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

137

UniGroup Too Price List

Panel Accessories PLACES Actual Height End-of-Run Variable Height Finish Post — Regular — Low Profile Wood Top Cap — Wood Surface

HVWE

End-of-Run Variable Height Finish Post — Regular — Low Profile Wood Top Cap — Fabric Surface

HVFE

138

April 2008 / USA

4′′(102mm) 6′′(152mm) 7′′(178mm) 8′′(203mm) 12′′(305mm) 13′′(330mm) 14′′(356mm) 18′′(457mm) 19′′(483mm) 20′′(508mm) 24′′(610mm) 26′′(660mm) 27′′(686mm) 31′′(787mm) 32′′(813mm) 34′′(864mm) 38′′(965mm) 45′′(1143mm) 52′′(1321mm)

Width

Number

Price

2′′(51mm)

HVWE-0004 HVWE-0006 HVWE-0007 HVWE-0008 HVWE-0012 HVWE-0013 HVWE-0014 HVWE-0018 HVWE-0019 HVWE-0020 HVWE-0024 HVWE-0026 HVWE-0027 HVWE-0031 HVWE-0032 HVWE-0034 HVWE-0038 HVWE-0045 HVWE-0052

$ 59 61 63 64 80 82 83 97 101 102 109 122 123 130 131 135 140 154 177

Features

To Order, Specify:

• Includes end-of-run wood vertical cover with regular end and low profile wood top cap. • Required on exposed portion of taller panel side rail where two or more panels of different heights meet. • Always use in conjunction with finish posts. • Finish posts are required for wood top cap panel configurations.

1) Product number.

4′′(102mm) 6′′(152mm) 8′′(203mm) 12′′(305mm) 13′′(330mm) 14′′(356mm) 18′′(457mm) 19′′(483mm) 20′′(508mm) 24′′(610mm) 26′′(660mm) 27′′(686mm) 31′′(787mm) 32′′(813mm) 34′′(864mm) 38′′(965mm) 45′′(1143mm) 52′′(1321mm)

2′′(51mm)

2) Wood finish color for post. 3) Wood finish color for top cap.

HVFE-0004 HVFE-0006 HVFE-0008 HVFE-0012 HVFE-0013 HVFE-0014 HVFE-0018 HVFE-0019 HVFE-0020 HVFE-0024 HVFE-0026 HVFE-0027 HVFE-0031 HVFE-0032 HVFE-0034 HVFE-0038 HVFE-0045 HVFE-0052

Features

To Order, Specify:

• Includes end-of-run fabric vertical cover with regular end and low profile wood top cap. • Required on exposed portion of taller panel side rail where two or more panels of different heights meet. • Always use in conjunction with finish posts. • Finish posts are required for wood top cap panel configurations.

1) Product number.

Class BA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

2) Fabric surface and color. 3) Wood finish color for top cap.

$ 30 37 40 50 51 61 69 72 74 83 88 89 102 103 106 110 112 128

UniGroup Too Price List

Panel Accessories PLACES Actual Height Low Profile Wood Top Cap Kit

5/8′′(16mm)

Width

Depth

Number

Price

12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm)

2′′(51mm)

HTCW-0012 HTCW-0018 HTCW-0024 HTCW-0030 HTCW-0036 HTCW-0042 HTCW-0048 HTCW-0054 HTCW-0060

$ 60 80 97 116 135 140 167 176 205

Features

To Order, Specify:

• Includes low profile wood top cap and panel alignment tab. • For replacement of low profile steel and wood top cap.

1) Product number.

HTCW

90° Low Profile Wood Top Cap for 2-Way

5/8′′(16mm)

2′′(51mm)

2′′(51mm)

2) Wood finish color.

HTCC-0090

Features

To Order, Specify:

• Includes one low profile wood top cap and attachment hardware. • For field replacement only.

1) Product number.

$50

2) Wood finish color.

HTCC-0090

180° Low Profile Wood Top Cap for 3-Way

5/8′′(16mm)

2′′(51mm)

2′′(51mm)

HTCS-0180

Features

To Order, Specify:

• Includes one low profile wood top cap and attachment hardware. • For field replacement only.

1) Product number.

$49

2) Wood finish color.

HTCS-0180

90° Low Profile Wood Top Cap for 4-Way

5/8′′(16mm)

2′′(51mm)

2′′(51mm)

HTFW-0004

Features

To Order, Specify:

• Includes one low profile wood top cap and attachment hardware. • Fills gap at intersection of four PLACES low profile wood top cap panels.

1) Product number.

$49

2) Wood finish color.

HTFW-0004

In-Line Low Profile Wood Top Cap

5/8′′(16mm)

2′′(51mm)

2′′(51mm)

HTCW-0002

Features

To Order, Specify:

• Includes one in-line low profile wood top cap and attachment hardware. • Required in condition illustrated. • Always use in conjunction with 180° finish posts.

1) Product number.

$49

2) Wood finish color.

HTCW-0002

Class BA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

139

UniGroup Too Price List

Panel Accessories PLACES Actual Height End-of-Run Finish Post — Wood Top Cap

Width

5/8′′(16mm)

Number

Price

2′′(51mm)

HTCE-0001

Features

To Order, Specify:

• Includes wood top cap and attachment hardware. • Replacement wood top cap for end-of-run finish posts, wood or fabric surface.

1) Product number.

$25

2) Wood finish color.

HTCE

Low Profile Steel Top Cap for 3-Way and 4-Way

7/16′′(11mm)

2′′(51mm)

2′′(51mm)

Features

To Order, Specify:

• Includes one plastic top cap. • Fills gap at intersection of three or four PLACES low profile steel top cap panels.

1) Product number.

HTF-0004

140

April 2008 / USA

HTF-0004

Class BA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

2) Trim color.

$22

UniGroup Too Price List

Panel Accessories PLACES

Side Trim Rail With Notch

HRE

Full Height Side Trim Rail – for use with Add-On Panels

Panel Height

Number

Price

30′′(762mm) 37′′(940mm) 44′′(1118mm) 50′′(1270mm) 56′′(1422mm) 64′′(1626mm) 68′′(1727mm) 82′′(2083mm)

HRE-0030 HRE-0037 HRE-0044 HRE-0050 HRE-0056 HRE-0064 HRE-0068 HRE-0082

$50 54 61 69 70 71 76 79

Features

To Order, Specify:

• Includes one notched side rail. • Two side rails are included with each panel; order as replacement for base panel only.

1) Product number. 2) Trim color.

Height

Base Panel Height/Add-On

Number

Price

44′′(1118mm) 50′′(1270mm) 56′′(1422mm) 64′′(1626mm) 68′′(1727mm) 64′′(1626mm) 68′′(1727mm) 68′′(1727mm) 82′′(2083mm) 82′′(2083mm)

30′′(762mm)/14′′(356mm) 30′′(762mm)/20′′(508mm) 44′′(1118mm)/12′′(305mm) 44′′(1118mm)/20′′(508mm) 44′′(1118mm)/24′′(610mm) 50′′(1270mm)/14′′(356mm) 50′′(1270mm)/18′′(457mm) 56′′(1422mm)/12′′(305mm) 64′′(1626mm)/18′′(457mm) 68′′(1727mm)/14′′(356mm)

HREH-3014 HREH-3020 HREH-4412 HREH-4420 HREH-4424 HREH-5014 HREH-5018 HREH-5612 HREH-6418 HREH-6814

$ 57 75 $ 82 91 91 $100 100 $100 $104 $104

Feature

To Order, Specify:

• Includes one full height side trim rail.

1) Product number.

Specification Tips

2) Trim color.

HREH

• For use with base panel and one add-on panel. • For two high add-on panel applications specify separately full-height side trim rail for base panel and one high add-on, for two high add-on panel location use side trim rail that ships with add-on panel. See Specification Guide for application guidelines. 2371-6401

Panel Bridge Features

To Order, Specify:

• Includes one panel bridge. • Conceals top raceway between two top caps in a straight panel configuration. • Applicable to PLACES 2′′(51mm) thick panels only. • For use with low profile steel top caps.

1) Product number.

$7

2) Trim color.

2371-6401

Hinges

HHE

Panel Height

Width

Number

Price

30′′(762mm) 37′′(940mm) 44′′(1118mm) 50′′(1270mm) 56′′(1422mm) 64′′(1626mm) 68′′(1727mm) 82′′(2083mm)

1 1/8′′(29mm)

HHE-0030 HHE-0037 HHE-0044 HHE-0050 HHE-0056 HHE-0064 HHE-0068 HHE-0082

$ 9 9 10 11 11 12 13 16

Features

To Order, Specify:

• Includes one hinge set for one side of trim rail. • For replacement only (hinges are included with panels). • One hinge set connects every two panels for angular connections. • Two hinge sets are used for straight-line conditions.

1) Product number.

Class BA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

2) Trim color.

April 2008 / USA

141

UniGroup Too Price List

Panel Accessories PLACES

Wall Track

Height

Depth

Width

Number

Price

60′′(1524mm) 72′′(1829mm) 84′′(213mm)

3/4′′(19mm)

5/8′′(16mm)

WT-60 WT-72 WT-84

$101 123 137

Features

To Order, Specify:

• Includes two wall tracks and mounting screws #10 2 1/2′′(64mm) long. • For attachment of components to structural walls. • See installation instructions for proper mounting.

1) Product number. 2) Trim color for screws. 3) Trim color for track.

Specification Tip

WT

Class AA

Wall Mount Kit

WMK

Class AA

• Not for use with up-mount overhead storage kit.

Panel Height

Depth

Number

Price

30′′(762mm) 35′′(889mm)& 37′′(940mm) 42′′(1067mm)& 44′′(1118mm) 48′′(1219mm)& 50′′(1219mm) 56′′(1422mm) 62′′(1575mm)& 64′′(1626mm) 66′′(1676mm)& 68′′(1727mm) 80′′(2032mm)& 82′′(2083mm)

1/4′′(6mm)

WMK-30 WMK-35 WMK-42 WMK-48 WMK-54 WMK-62 WMK-66 WMK-80

$ 54 64 71 79 88 102 107 130

Features

To Order, Specify:

• Includes wall-mount channel, hinges and screws. • For mounting panels, with or without add-on panel, to a structural wall. • Adds 1/4′′(6mm) to the panel width.

1) Product number. 2) Trim color.

Specification Tip • Must be properly anchored to a structural wall.

T-Mount Kit — Center and End Conditions

HMKT

Class BA

30′′(762mm) 37′′(940mm) 44′′(1118mm) 50′′(1270mm) 56′′(1422mm) 64′′(1626mm) 68′′(1727mm) 82′′(2083mm)

HMKT-0030 HMKT-0037 HMKT-0044 HMKT-0050 HMKT-0056 HMKT-0064 HMKT-0068 HMKT-0082

Features

To Order, Specify:

• Includes pre-drilled side rail, center-mount brackets, end-mount brackets, light block extrusions, glide housing, and screws. • Brackets included for both center- and end-mount T-conditions. • Connects two panels in a T-condition. T-mount can attach to a base panel and one fabric add-on panel. Configuration coming off of a T-mount cannot contain add-on panels.

1) Product number.

Specification Tips • Both panels in a T-mount condition must be of equal height. • Cannot mount on glazed panels, glazed add-on panels or doors. • For use with PLACES panels only.

142

April 2008 / USA

SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

2) Trim color.

$ 60 69 82 95 98 102 109 125

UniGroup Too Price List

Panel Accessories PLACES

All-Purpose Hook

Actual Height

Depth

Width

Number

Price

1′′(25mm)

3′′(76mm)

1/2′′(13mm)

HCH-0008

$87

Features

To Order, Specify:

• Includes eight hooks. • Attaches to PLACES low profile steel top cap panels only.

1) Product number. 2) Trim color.

HCH-0008

All-Purpose Hook — For Low Profile Wood Top Cap Panels

1′′(25mm)

3′′(76mm)

5/8′′(16mm)

HCH-0008-W

Features

To Order, Specify:

• Includes eight hooks. • Attaches to PLACES low profile wood top cap panels only.

1) Product number.

$87

2) Trim color.

HCH-0008-W

Seismic Anchoring Bracket

HAB-0001

$125

Features

To Order, Specify:

• Includes package of six formed steel brackets. • For seismic anchoring of UniGroup Too, UniGroup and PLACES panels.

1) Product number. (No finish specification required.)

HAB

Friction Pad

7031-0501

$6

Feature

To Order, Specify:

• Includes six pads.

1) Product number. (No finish specification required.)

Specification Tip • Attaches to bottom of glide to prevent movement of panels on hard surface flooring.

7031-0501

2/90 Sign Systems

2/90 Sign Systems is a recommended signage program for use with Haworth Systems. Signage options include ADA-compliant panel-mounted name signs, department signs, building directories, in/out boards, restroom and no smoking signs. For inquiries, catalogs or orders, contact System 2/90 directly at 1-800-777-4310, fax (616) 656-4300, P.O. Box 888289, Grand Rapids, MI 49588-8289.

Class BA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

143

UniGroup Too Price List

Clerestory Kits for use with UniGroup Too, UniGroup, PLACES

Clerestory Illustration

Planning and Specification

1. To determine how many lineal feet of straight track are needed, divide the total lineal feet of panels that require Clerestory by ten and round-off to the next highest whole number. Order that quantity of Straight Track SPCL-1616. 2. Examine your floor plan to determine the type and quantities of corner kits you will require. Note that only 90° angles are possible; other angles cannot be accommodated. 3. If mounting Clerestory on straight panel runs that include doors or glazed panels, a maximum combination of four lineal feet of glazed panels or glazed panels with a door is permitted per 12′(3658mm) panel run. 4. Follow normal support and load values for UniGroup Too, UniGroup and PLACES panels as defined in Haworth Installation Procedures. 5. Be sure that sprinkler, HVAC and lighting locations are taken into consideration when planning for Clerestory; it does form a floor-to-ceiling barrier. 6. Consult Installation Instructions #7021-6201 for specific installation information.

NOTES: - Installation instructions available on Source Book. - Not to be used with top feed modules. - Ceiling bracket designed to fit 1′′(25mm) grid. - For UniGroup Too applications, 90° finish posts must be replaced with UniGroup 90° finish posts so radius aesthetic matches 2-way corner pieces. Field cut to size. - Installation of clerestory kits on PLACES panels will reduce the cabling capacity of the upper panel raceway and restrict access.

Code Compliance

144

April 2008 / USA

Where Clerestory is used with UniGroup Too, UniGroup and PLACES panels that feature The Power Base electrical system, electrical components do not comply with UL 183 requirements for floor-to-ceiling partitions; the electrical components do comply with UL 1286 requirements for panel systems. Verify acceptance of this exception and check local codes.

UniGroup Too Price List

Clerestory Kits for use with UniGroup Too, UniGroup, PLACES

Application Guidelines

• Clerestory is designed to be used with 80′′(2032mm) or 82′′(2083mm) high UniGroup Too, UniGroup and PLACES panels where there is a maximum ceiling height of 10′(3048mm), OR with 64′′(1626mm) or 68′′(1727mm)-high panels where there is a maximum ceiling height of 9′(2743mm). Be sure that Clerestory complies with local building codes before ordering and installing the product. • All aluminum and plastic components (such as corner moldings) are available color-matched to UniGroup Too, UniGroup and PLACES panel trim colors. Not available in Metallic finishes.

Straight Track Kit

Number

Price

SPCL-1616

$458

SPCL-1616

2-Way Connector Kit

• Note: Laminated safety glass is required for use in all Clerestory applications; consult installation instructions glass specification directions (purchase all required glass locally). • Minimum thickness of glass is 0.220′′(6mm). • Maximum thickness of glass is 0.275′′(7mm).

Features

To Order, Specify:

• Includes two 10′(3048mm) lengths of extruded aluminum, painted ceiling and panel track; two (2) 10′(3048mm) lengths of ‘‘H’’ spacer; extruded aluminum, painted vertical connectors; four (4) couplers; and hardware. • To determine the amount of lineal feet of straight track needed, divide the total lineal feet of panels that require Clerestory by 10 and round off to the next highest whole number. Order that quantity of straight track.

1) Product number.

SPCL-1613

2) Trim color.

Vertical

$71

Features

To Order, Specify:

• Includes one 4′(1219mm) length of connector post and corner moldings for panel and ceiling.

1) Product number. 2) Trim color.

Specification Tip • Use with UniGroup or PLACES 90° finish posts only.

SPCL-1613

3-Way Connector Kit

SPCL-1614

Vertical

$78

Features

To Order, Specify:

• Includes one 4′(1219mm) length of connector post and corner moldings for panel and ceiling.

1) Product number. 2) Trim color.

SPCL-1614

4-Way Connector Kit

SPCL-1615

Vertical

$86

Features

To Order, Specify:

• Includes one 4′(1219mm) length of connector post and corner moldings for panel and ceiling.

1) Product number. 2) Trim color.

SPCL-1615

End Kit

SPCL-1622

Vertical

$43

Features

To Order, Specify:

• Includes one 4′(1219mm) length of end trim post and panel end cap molding.

1) Product number. 2) Trim color.

SPCL-1622

Class AA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

145

UniGroup Too Price List

Electrical and Cable Management Top Feed Modules for use with UniGroup Too

UniGroup Too Top Feed Module — 3-Circuit 10′ Ceiling Height

Panel Height

Pole Length

Number

Price

32′′(813mm) 40′′(1016mm) - 56′′(1422mm) 64′′(1626mm) - 72′′(1829mm) 80′′(2032mm)

102′′(2591mm) 90′′(2286mm) 68′′(1727mm) 50′′(1270mm)

E2FM-2 E2FM-4 E2FM-6 E2FM-8

$366 352 341 334

Features

To Order, Specify:

• Includes pole, junction box with cover, ceiling bezel, plug sub-assembly, and square painted top cap cover. • Required when the building’s power source must be accessed from the space above the ceiling and carried to the base raceway. • Refer to Specification Guide for cable management. • 10′(3048mm) ceiling height limit.

1) Product number. 2) Trim color for pole. $14 upcharge (list) for Metallic trim color. 3) Trim color top cap piece. $14 upcharge (list) for Metallic trim color.

Specification Tips • When specified, field modification of top cap is required. • Not for use with power sources other than 120 volt 60 hertz. • For use with UniGroup Too square painted top cap panels only. • Not for use with glazed add-on panels, glazed panels or single doors.

E2FM C

R

US

NOTE: Wire harness length is 139 ′′(3531mm) regardless of pole length.

UniGroup Too Top Feed Module — 3-Circuit 12′ Ceiling Height

40′′(1016mm) - 80′′(2032mm)

124′′(3150mm)

Features

To Order, Specify:

• Includes pole, junction box with cover, ceiling bezel, plug sub-assembly, and square painted top cap cover. • Required when the building’s power source must be accessed from the space above the ceiling and carried to the base raceway. • Refer to Specification Guide for cable management. • 12′(3658mm) ceiling height limit.

1) Product number.

Specification Tips • When specified, field modification of top cap is required. • Not for use with power sources other than 120 volt 60 hertz. • For use with UniGroup Too square painted top cap panels only. • Not for use with glazed add-on panels, glazed panels or single doors. E2FM-X C

R

US

NOTE: Wire harness length is 230 ′′(5842mm).

146

April 2008 / USA

E2FM-X

Class AC – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

$673

2) Trim color for pole. $14 upcharge (list) for Metallic trim color. 3) Trim color top cap piece. $14 upcharge (list) for Metallic trim color.

UniGroup Too Price List

Electrical and Cable Management Top Feed Modules for use with UniGroup Too

UniGroup Too Top Feed Module — 6-Circuit 10′ Ceiling Height

Panel Height

Panel Width

Pole Length

Number

Price

32′′(813mm) 32′′(813mm) 40′′(1016mm) - 56′′(1422mm) 40′′(1016mm) - 56′′(1422mm) 64′′(1626mm) - 72′′(1829mm) 80′′(2032mm)

30′′(762mm) - 36′′(914mm) 42′′(106716mm) - 60′′(1524mm) 30′′(762mm) - 36′′(914mm) 42′′(106716mm) - 60′′(1524mm) All All

102′′(2591mm) 102′′(2591mm) 90′′(2286mm) 90′′(2286mm) 68′′(1727mm) 50′′(1270mm)

E2FM-10-6 E2FM-12-6 E2FM-14-6 E2FM-16-6 E2FM-18-6 E2FM-20-6

$644 644 621 621 598 588

Features

To Order, Specify:

• Includes pole, junction box with cover, ceiling bezel, two plug sub-assemblies, and square painted top cap cover. • Required when the building’s power source must be accessed from the space above the ceiling and carried to the base raceway. • 10′(3048mm) ceiling height limit.

1) Product number. 2) Trim color for pole. $14 upcharge (list) for Metallic trim color. 3) Trim color top cap piece. $14 upcharge (list) for Metallic trim color.

Specification Tips E2FM-6 C

R

US

NOTE: Wire harness length is 180 ′′(4572mm) regardless of pole length.

• When specified, field modification of top cap is required. • No cable capacity in 6-circuit top feed, power only. • Not for use with power sources other than 120 volt 60 hertz. • For installation on panels no less than 30′′(762mm) wide. • For use with UniGroup Too square painted top cap panels only. • Not for use with glazed add-on panels, glazed panels or single doors.

Class AC – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

147

UniGroup Too Price List

Electrical and Cable Management Top Feed Modules for use with UniGroup

UniGroup Top Feed Module — 3-Circuit 10′ Ceiling Height

Panel Height

Pole Length

Number

Price

44′′(1118mm) - 56′′(1422mm) 64′′(1626mm) - 68′′(1727mm) 82′′(2083mm)

90′′(2286mm) 68′′(1727mm) 50′′(1270mm)

TFM-4-B TFM-6-B TFM-8-B

$378 368 359

Features

To Order, Specify:

• Includes the pole, junction box with cover, ceiling bezel, plug sub-assembly, and radius top cap cover. • Required when the building’s power source must be accessed from the space above the ceiling and carried to the base raceway. • Refer to Specification Guide for cable management. • 10′(3048mm) ceiling height limit. • When used with UniGroup radius steel top cap, field cutting of top cap is required. When used with UniGroup radius wood top cap, access hole must be cut into top cap.

1) Product number. 2) Trim color for pole. 3) Trim color for top cap piece.

Specification Tips • When specified, field modification of top cap is required. • Not for use with power sources other than 120 volt 60 hertz. • For use with UniGroup panels only. • Not for use with glazed add-on panels, glazed and open frame panels or single doors.

TFM-B

C

R

US

NOTE: Wire harness length is 139 ′′(3531mm) regardless of pole length.

UniGroup Top Feed Module — 3-Circuit 12′ Ceiling Height

37′′(940mm) - 82′′(2083mm)

124′′(3150mm)

Features

To Order, Specify:

• Includes the pole, junction box with cover, ceiling bezel, plug sub-assembly, and radius top cap cover. • Required when the building’s power source must be accessed from the space above the ceiling and carried to the base raceway. • Refer to Specification Guide for cable management. • 12′(3658mm) ceiling height limit. • When used with UniGroup radius steel top cap, field cutting of top cap is required. When used with UniGroup radius wood top cap, access hole must be cut into top cap.

1) Product number.

Specification Tips • When specified, field modification of top cap is required. • Not for use with power sources other than 120 volt 60 hertz. • For use with UniGroup panels only. • Not for use with glazed add-on panels, glazed and open frame panels or single doors. TFM-X-B

C

R

US

NOTE: Wire harness length is 230 ′′(5842mm).

148

April 2008 / USA

TFM-X-B

Class AA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

2) Trim color for pole. 3) Trim color for top cap piece.

$717

UniGroup Too Price List

Electrical and Cable Management Top Feed Modules for use with UniGroup

UniGroup Top Feed Module — 6-Circuit 10′ Ceiling Height

Panel Height

Panel Width

Pole Length

Number

Price

44′′(1118mm) - 56′′(1422mm) 44′′(1118mm) - 56′′(1422mm) 64′′(1626mm) - 68′′(1727mm) 82′′(2083mm)

30′′(762mm), 36′′(914mm) 42′′(1067mm), 48′′(1219mm), 60′′(1524mm) All All

90′′(2286mm) 90′′(2286mm) 68′′(1727mm) 50′′(1270mm)

TFM-14 TFM-16 TFM-18 TFM-20

$668 668 643 633

Features

To Order, Specify:

• Includes the pole, junction box with cover, ceiling bezel, two plug sub-assemblies, and radius top cap cover. • Required when the building’s power source must be accessed from the space above the ceiling and carried to the base raceway. • For installation on panels no less than 30′′(762mm)-wide. • 10′(3048mm) ceiling height limit. • No cable capacity in 6-circuit top feed, power only. • When used with UniGroup radius steel top cap, field cutting of top cap is required. When used with UniGroup radius wood top cap, access hole must be cut into top cap.

1) Product number. 2) Trim color for pole. 3) Trim color for top cap piece.

Specification Tips

TFM

C

R

US

• When specified, field modification of top cap is required. • Not for use with power sources other than 120 volt 60 hertz. • For use with UniGroup panels only. • Not for use with glazed add-on panels, glazed and open frame panels or single doors.

NOTE: Wire harness length is 180 ′′(4572mm) regardless of pole length.

Class AA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

149

UniGroup Too Price List

Electrical and Cable Management Top Feed Modules for use with PLACES

PLACES Top Feed Module — 3-Circuit 10′ Ceiling Height

Panel Height

Pole Length

Number

Price

44′′(1118mm) - 56′′(1422mm) 64′′(1626mm) - 68′′(1727mm) 82′′(2083mm)

90′′(2286mm) 68′′(1727mm) 50′′(1270mm)

HTFM-0004 HTFM-0006 HTFM-0008

$431 415 402

Features

To Order, Specify:

• Includes the pole, junction box with cover, ceiling bezel, wire harness with plug, and low profile top cap cover. • Required when the building’s power source must be accessed from the space above the ceiling and carried to the base raceway. • Refer to Specification Guide for cable management. • 10′(3048mm) ceiling height limit. • When used with PLACES low profile steel top cap, field cutting of top cap is required. When used with PLACES low profile wood top cap, access hole must be cut into top cap.

1) Product number. 2) Trim color for pole. 3) Trim color for top cap piece.

Specification Tips • When specified, field modification of top cap is required. • Not for use with power sources other than 120 volt 60 hertz. • For use with PLACES panels only. • Not for use with glazed add-on panels, glazed and open frame panels or single doors.

HTFM

C

R

US

NOTE: Wire harness length is 139 ′′(3531mm) regardless of pole length.

PLACES Top Feed Module — 3-Circuit 12′ Ceiling Height

37′′(940mm) - 82′′(2083mm)

124′′(3150mm)

Features

To Order, Specify:

• Includes the pole, junction box with cover, ceiling bezel, wire harness with plug, and low profile top cap cover. • Required when the building’s power source must be accessed from the space above the ceiling and carried to the base raceway. • Refer to Specification Guide for cable management. • 12′(3658mm) ceiling height limit. • When used with PLACES low profile steel top cap, field cutting of top cap is required. When used with PLACES low profile wood top cap, access hole must be cut into top cap.

1) Product number.

Specification Tips • When specified, field modification of top cap is required. • Not for use with power sources other than 120 volt 60 hertz. • For use with PLACES panels only. • Not for use with glazed add-on panels, glazed and open frame panels or single doors.

HTFM-X

C

R

US

NOTE: Wire harness length is 230 ′′(5842mm).

150

April 2008 / USA

HTFM-X

Class BA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

2) Trim color for pole. 3) Trim color for top cap piece.

$803

UniGroup Too Price List

Electrical and Cable Management Top Feed Modules for use with PLACES

PLACES Top Feed Module — 6-Circuit 10′ Ceiling Height

Panel Height

Panel Width

Pole Length

Number

Price

44′′(1118mm) - 56′′(1422mm) 44′′(1118mm) - 56′′(1422mm) 64′′(1626mm) - 68′′(1727mm) 82′′(2083mm)

30′′(762mm), 36′′(914mm) 42′′(1067mm), 48′′(1219mm) All All

90′′(2286mm) 90′′(2286mm) 68′′(1727mm) 50′′(1270mm)

HTFM-14 HTFM-16 HTFM-18 HTFM-20

$756 756 688 710

Features

To Order, Specify:

• Includes the pole, junction box with cover, ceiling bezel, wire harness with plug, and low profile top cap cover. • Required when the building’s power source must be accessed from the space above the ceiling and carried to the base raceway. • For installation on panels no less than 30′′(762mm) wide. • 10′(3048mm) ceiling height limit. • No cable capacity in 6-circuit top feed, power only. • When used with PLACES low profile steel top cap, field cutting of top cap is required. When used with PLACES low profile wood top cap, access hole must be cut into top cap.

1) Product number. 2) Trim color for pole. 3) Trim color for top cap piece.

Specification Tips • When specified, field modification of top cap is required. • Not for use with power sources other than 120 volt 60 hertz. • For use with PLACES panels only. • Not for use with glazed add-on panels, glazed and open frame panels or single doors.

HTFM

C

R

US

NOTE: Wire harness length is 180 ′′(4572mm) regardless of pole length.

Class BA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

151

UniGroup Too Price List

Electrical and Cable Management Cable Management Poles for use with UniGroup Too and UniGroup

UniGroup Too/UniGroup Cable Management Pole — One Channel

Number

Price

CMPF-1-BR

$401

Features

To Order, Specify:

• Includes communications pole with cover, base raceway cover and ceiling bezel plate. • Interface with the base raceway cover. • Provides a means of vertically routing and accessing communications cabling within the panel’s base raceway. • May be used in 90°, 2-way (in-line), 3-way or 4-way panel conditions. • For use up to 10′(3048mm) ceiling height. • Refer to Specification Guide for cable management.

1) Product number. 2) Trim color for raceway cover. $14 upcharge (list) for Metallic trim color. 3) Trim color for pole. $14 upcharge (list) for Metallic trim color.

Specification Tips • Cannot be used in conjunction with finish posts. • For use with UniGroup Too and UniGroup.

CMPF-1-BR

UniGroup Too/UniGroup Cable Management Pole — Two Channels

CMPT-1-B

$427

Features

To Order, Specify:

• Includes communications pole with covers, base raceway covers and ceiling bezel plate. • Provides cabling capacity with two integral channels. • May be used as a 2-way in-line panel filler. • Interior of 2′′(51mm)-wide pole is separated by a metal divider, which separates communication cables in each compartment. • For use up to 10′(3048mm) ceiling height.

1) Product number.

Specification Tips • Use straight span connector to bypass electrical distribution. • Cannot be used in conjunction with finish posts. • For use with UniGroup Too and UniGroup.

CMPT-1-B

152

April 2008 / USA

Class AA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

2) Trim color for raceway cover. $14 upcharge (list) for Metallic trim color. 3) Trim color for pole. $14 upcharge (list) for Metallic trim color.

UniGroup Too Price List

Electrical and Cable Management Cable Management Poles for use with PLACES

PLACES Cable Management Pole — Panel Height

HCPA (2-Way)

HCPS (3-Way)

Height

Width

Description

Number

Price

44′′(1118mm) 50′′(1270mm) 56′′(1422mm) 64′′(1626mm) 68′′(1727mm) 82′′(2083mm) 44′′(1118mm) 50′′(1270mm) 56′′(1422mm) 64′′(1626mm) 68′′(1727mm) 82′′(2083mm)

2′′(51mm)

For 2-way 90° panel condition

2′′(51mm)

For 3-way panel condition

HCPA-0044 HCPA-0050 HCPA-0056 HCPA-0064 HCPA-0068 HCPA-0082 HCPS-0044 HCPS-0050 HCPS-0056 HCPS-0064 HCPS-0068 HCPS-0082

$279 286 290 293 299 305 $279 286 290 293 299 305

Features

To Order, Specify:

• Includes communications pole with cover, base raceway cover and top cap. • Vertically routes communications cabling. • Use in 2-way or 3-way panel conditions. • In a 4-way condition, use cover as the fourth cable exit location. • 10′(3048mm) ceiling height limit. • Poles feature openings to match the panel’s top raceway for continuous cable routing. • Attaches to panel side trim rails. • Refer to Specification Guide for cable management.

1) Product number. 2) Trim color. 3) Trim color for raceway cover.

Specification Tips • Cannot be used in conjunction with finish posts. • For use with PLACES.

PLACES Cable Management Pole — For 10′(3048mm)-High Ceiling

HCPA (2-Way)

HCPS (3-Way)

44′′(1118mm) 50′′(1270mm) 56′′(1422mm) 64′′(1626mm) 68′′(1727mm) 82′′(2083mm) 44′′(1118mm) 50′′(1270mm) 56′′(1422mm) 64′′(1626mm) 68′′(1727mm) 82′′(2083mm) 44′′(1118mm) 50′′(1270mm) 56′′(1422mm) 64′′(1626mm) 68′′(1727mm) 82′′(2083mm)

2′′(51mm)

For 2-way 90° panel condition

2′′(51mm)

For 3-way panel condition

2′′(51mm)

For end-of-run panel condition

HCPA-1044 HCPA-1050 HCPA-1056 HCPA-1064 HCPA-1068 HCPA-1082 HCPS-1044 HCPS-1050 HCPS-1056 HCPS-1064 HCPS-1068 HCPS-1082 HCPE-1044 HCPE-1050 HCPE-1056 HCPE-1064 HCPE-1068 HCPE-1082

Features

To Order, Specify:

• Includes communications pole with covers, base raceway covers and ceiling bezel plate. • Vertically routes communications cabling. • Use in 2-way, 3-way, or end-of-run panel conditions (floor to ceiling only). • In a 4-way condition, use cover as the fourth cable exit location. • 10′(3048mm) ceiling height limit. • Poles feature openings to match the panel’s top raceway for continuous cable routing. • Attaches to panel side trim rails. • Refer to Specification Guide for cable management.

1) Product number.

$279 286 290 293 299 305 $279 286 290 293 299 305 $272 280 285 288 293 299

2) Trim color. 3) Trim color for raceway cover.

Specification Tips • Cannot be used in conjunction with finish posts. • For use with PLACES. HCPE (End-of-run)

Class BA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

153

UniGroup Too Price List

Electrical and Cable Management Cable Management Poles for use with PLACES

PLACES Cable Management Pole — For 12′(3658mm)-High Ceiling

HCPA (2-Way)

HCPS (3-Way)

HCPE (End-of-run)

Height

Width

Description

Number

Price

44′′(1118mm) 50′′(1270mm) 56′′(1422mm) 64′′(1626mm) 68′′(1727mm) 82′′(2083mm) 44′′(1118mm) 50′′(1270mm) 56′′(1422mm) 64′′(1626mm) 68′′(1727mm) 82′′(2083mm) 44′′(1118mm) 50′′(1270mm) 56′′(1422mm) 64′′(1626mm) 68′′(1727mm) 82′′(2083mm)

2′′(51mm)

For 2-way 90° panel condition

2′′(51mm)

For 3-way panel condition

2′′(51mm)

For end-of-run panel condition

HCPA-1244 HCPA-1250 HCPA-1256 HCPA-1264 HCPA-1268 HCPA-1282 HCPS-1244 HCPS-1250 HCPS-1256 HCPS-1264 HCPS-1268 HCPS-1282 HCPE-1244 HCPE-1250 HCPE-1256 HCPE-1264 HCPE-1268 HCPE-1282

$315 321 326 329 334 343 $315 321 326 329 334 343 $308 315 320 323 329 334

Features

To Order, Specify:

• Includes communications pole with covers, base raceway covers and ceiling bezel plate. • Vertically routes communications cabling. • Use in 2-way, 3-way, or end-of-run panel conditions (floor to ceiling only). • In a 4-way condition, use cover as the fourth cable exit location. • 12′(3658mm) ceiling height limit. • Poles feature openings to match the panel’s top raceway for continuous cable routing. • Refer to Specification Guide for cable management.

1) Product number.

Specification Tips • Cannot be used in conjunction with finish posts. • Attaches to panel side trim rails. • For use with PLACES.

154

April 2008 / USA

Class BA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

2) Trim color. 3) Trim color for raceway cover.

UniGroup Too Price List

Electrical and Cable Management Cable Management Posts for use with PLACES

PLACES Cable Management Post — Variable Height — Three-Way 180° — Fabric or Painted Surface

Height

Width

24′′(610mm) 52′′(1321mm)

2′′(51mm)

Fabric Number

Painted Number

Price

HSCP-0024-F1 HSCP-0052-F1

HSCP-0024-V1 HSCP-0052-V1

$139 198

Features

To Order, Specify:

• Includes post, low profile top cap and replacement low profile top cap for finish post. • For three-way, 180° panel configurations. • Use when taller panel meets lower panels in a straight-run condition and panel-top cable storage is required to continue along panel runs. • Field cut to appropriate length.

1) Product number. 2) Fabric or painted surface color. 3) Trim color.

Specification Tip • For use with PLACES.

HSCP-F1 HSCP-V1

PLACES Cable Management Post — Variable Height — Two-Way 90° — Fabric or Painted Surface

24′′(610mm) 52′′(1321mm)

2′′(51mm)

HSCP-0024-F2 HSCP-0052-F2

HSCP-0024-V2 HSCP-0052-V2

Features

To Order, Specify:

• Includes post, low profile top cap and replacement low profile top cap for finish post. • For 90° panel configuration applications only. • Use when panels of two different heights meet and cable storage is required to continue along top of panel run. • Field cut to appropriate length.

1) Product number.

$139 198

2) Fabric or painted surface color. 3) Trim color.

Specification Tip • For use with PLACES.

HSCP-F2 HSCP-V2

PLACES Cable Management Post — Variable Height — In-Line — Fabric or Painted Surface

24′′(610mm) 52′′(1321mm)

2′′(51mm)

HSCP-0024-F3 HSCP-0052-F3

HSCP-0024-V3 HSCP-0052-V3

Features

To Order, Specify:

• Includes post, low profile cap and lower panel end cap. • For straight-line panel configurations. • Use when panels of two different heights meet and panel-top cable storage is required to continue along panel run. • Requires field modification of lower straight panel top cap. • Field cut to appropriate length.

1) Product number.

$139 198

2) Fabric or painted surface color. 3) Trim color.

Specification Tip • For use with PLACES.

HSCP-F3 HSCP-V3

PLACES Cable Management Post — Variable Height — Three-Way 90° — Fabric or Painted Surface

24′′(610mm) 52′′(1321mm)

2′′(51mm)

HCCP-0024-F4 HCCP-0052-F4

HCCP-0024-V4 HCCP-0052-V4

Features

To Order, Specify:

• Includes post, low profile top cap and replacement for low profile top cap finish post. • For 90° panel configuration applications only. • Use when equal-height panels at 90° meet lower-height panel and cable storage is required to continue along top of panel run. • Field cut to appropriate length.

1) Product number.

$163 232

2) Fabric or painted surface color. 3) Trim color.

Specification Tip • For use with PLACES. HCCP-F4 HCCP-V4

Class BA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

155

UniGroup Too Price List

Electrical and Cable Management Base Feed Modules for use with UniGroup Too, UniGroup, PLACES Length UniGroup Too, UniGroup and PLACES Base Feed Module — Hardwire Connection — 3-Circuit

BFM-1-B

Description

48′′(1219mm)

Number

Price

BFM-1-B

$174

Features

To Order, Specify:

• Includes a three-circuit power connector, four feet of liquid-tight, 1/2′′(13mm) flexible conduit, and eight 12-gauge lead wires. • For floor, column, or wall, hardwire connections to fixed power installations. • Attaches at any one of four receptacle sites in a powered base raceway. • Standard in charcoal finish color only. • Not for use with power sources other than 120 volt 60 hertz.

1) Product number. (No finish specification required.)

Specification Tip • For use with UniGroup Too, UniGroup and PLACES.

C

R

US

UniGroup Too, UniGroup and PLACES Raised Floor Base Feed Module — 3-Circuit

BFM-8-B

C

R

US

69′′(1753mm)

Infeed Connector

BFM-8-B

Features

To Order, Specify:

• Includes one base feed with 69′′(1753mm) long, black vinyl-covered 1/2′′(13mm) flexible conduit with eight 12-gauge lead wires for up to three 20-amp circuits of power. • Allows quick connect between UniGroup Too/UniGroup/PLACES and Haworth 3•3•2 underfloor modular wiring system. • Base feed module can be field modified to accommodate left or right conditions. • Attaches at any one of the four receptacle sites in a powered raceway of a standard or base panel. • Standard in charcoal trim color connector with black vinyl conduit cover only. • For 6-circuit applications order quantity of two.

1) Product number. (No finish specification required.)

$292

Specification Tip • For use with UniGroup Too, UniGroup and PLACES.

UniGroup Too, UniGroup and PLACES Base Feed Module — Plug Connection — 1-Circuit

BFM-2-B

C

R

US

24′′(610mm)

BFM-2-B

Features

To Order, Specify:

• Includes one-circuit power connector, two-foot cord, and 20 amp plug. • Requires a 20 amp, 125 volt power receptacle for plug-in (not included). • Attaches at any one of four receptacle sites in a powered base raceway. • Supplies power to circuit one only. • Not for use in Canada. • Not for use with isolated ground receptacles. • Not for use with power sources other than 120 volt 60 hertz.

1) Product number. (No finish specification required.)

$187

Specification Tip • For use with UniGroup Too, UniGroup and PLACES.

6′(1829mm) UniGroup Too, UniGroup and PLACES Base Feed Module Features (Canada) — Plug Connection — • Includes one-circuit power connector, 6′(1829mm) cord, and 1-Circuit a 15 amp plug. • Not for use in U.S.A. due to electrical code restrictions. • Meets CSA C22.2 No. 203-M91 requirements • Requires a 15 amp, 125 volt power receptacle for plug-in (not included). • Attaches at any one of four receptacle sites in a powered base raceway. • Supplies power to one circuit only. • Not for use with isolated ground receptacles. • Not for use with power sources other than 120 volt 60 hertz.

BFM-2-A

Specification Tip C

R

156

US

• For use with UniGroup Too, UniGroup, and PLACES.

April 2008 / USA

Class AA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

BFM-2-A

To Order, Specify: 1) Product number. (No finish specification required.)

$180

UniGroup Too Price List

Electrical and Cable Management Base Feed Modules for use with UniGroup Too, UniGroup, PLACES

Base Feed Module — Hardwire Connection — 6-Circuit

BFM-1-6

C

R

US

Length

Number

Price

72′′(1829mm)

BFM-1-6

$308

Features

To Order, Specify:

• Includes a 6-circuit power connector, six feet of liquid-tight, 1′′(25mm) flexible conduit, and 14 12-gauge lead wires. • For floor, column, or wall, hardwire connections to fixed power installations. • For installation on panels no less than 30′′(762mm) wide. • Standard in charcoal finish color only. • Not for use with power sources other than 120 volt 60 hertz.

1) Product number. (No finish specification required.)

Specification Tips • Requires field modification of base raceway cover. • For use with UniGroup Too, UniGroup and PLACES.

Base Feed Module — Concealed Hardwire Connection — Features 3-Circuit • Includes box with knockouts, 8 12-gauge lead wires and attachment hardware. • For floor, column, or wall, concealed hardwire connections to fixed power installations. • For installation on panels no less than 36′′(914mm) wide. • Conforms to New York City building code. • Not for use with power sources other than 120 volt 60 hertz.

BFM-6-B

$183

To Order, Specify: 1) Product number. (No finish specification required.)

Specification Tip • For use with UniGroup Too, UniGroup and PLACES. BFM-6-B

C

R

US

Base Feed Module — Concealed Flatwire Connection — 3-Circuit

BFM-15-B

$230

Features

To Order, Specify:

• Includes box with strain relief plate, 8 12-gauge lead wires and attachment hardware. • For floor, column, or wall, concealed flatwire connections to fixed power installations. • For installation on panels no less than 36′′(914mm) wide. • Not for use with power sources other than 120 volt 60 hertz.

1) Product number. (No finish specification required.)

Specification Tip • For use with UniGroup Too, UniGroup and PLACES. BFM-15-B

C

R

US

Base Feed Module — Concealed Hardwire Connection — Features 6-Circuit • Includes box with knockouts, 14 12-gauge lead wires and attachment hardware. • For floor, column, or wall hardwire connections to fixed power installations. • For installation on panels no less than 42′′(1067mm) wide. • Conforms to New York City building code. • Not for use with power sources other than 120 volt 60 hertz.

R

$331

1) Product number. (No finish specification required.)

Specification Tip

BFM-6-6

C

BFM-6-6

To Order, Specify:

• For use with UniGroup Too, UniGroup and PLACES. US

Class AA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

157

UniGroup Too Price List

Electrical and Cable Management Power Receptacles for use with UniGroup Too, UniGroup, PLACES

Power Receptacles

PRD-3-B

PRDI-5-B

R IG

PRS-2-B

C

R

PRSI-2-B

US

Quantity

Description

Number

Price

Six(6) Six (6) Six (6) Six(6)

Duplex IGR Duplex Single (20 amp) IGR Single (20 amp)

PRD-3-B PRDI-5-B PRS-2-B PRSI-2-B

$125 132 511 511

Features

To Order, Specify:

• Color-coded circuit selector for on-site programming to any one of three circuits available. • [PRD-3-B] Duplex 15-amp outlet accepts two plugs. • [PRDI-5-B] Duplex 15-amp outlet with an isolated ground. • [PRS-2-B] Single 20-amp outlet accepts one plug. • [PRDI-5-B] not for use with cord-fed base feed BFM-2-B. • [PRSI-2-B] Single 20-amp outlet with an isolated ground. Accepts one plug. • 20-amp outlet face standard in charcoal finish color only. • Not for use with power sources other than 120 volt 60 hertz.

1) Product number.

Specification Tip • For use with UniGroup Too, UniGroup and PLACES.

158

April 2008 / USA

Class AA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

2) Trim color (for PRD and PRDI only).

UniGroup Too Price List

Electrical and Cable Management Raceway Retrofit Kits for use with UniGroup Too, UniGroup, PLACES Actual Height Raceway Retrofit Kits — 3-Circuit

4′′(102mm)

RKN-B (Non-Powered)

RKP-B (Powered)

C

R

US

Panel Width

Non-Powered Number

Price

Powered Number

Price

18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm)

RKN-18-B RKN-2-B RKN-30-B RKN-3-B RKN-42-B RKN-4-B RKN-54-B RKN-5-B

$103 103 103 103 103 103 103 103

RKP-18-B RKP-2-B RKP-30-B RKP-3-B RKP-42-B RKP-4-B RKP-54-B RKP-5-B

$251 251 251 251 251 251 251 251

Features

To Order, Specify:

• Convert powered panels to non-powered panels or non-powered panels to powered panels. • Price of straight powered raceway kits includes one power distribution assembly, powered raceway cover, and flexible power connector. • Not for use with power sources other than 120 volt 60 hertz.

1) Product number. 2) Trim color. $14 upcharge (list) for Metallic trim color.

Specification Tip • For use with UniGroup Too, UniGroup and PLACES.

Class AA

Raceway Retrofit Kits — Powered — 6-Circuit

4′′(102mm)

RKP-6 (6-Circuit Powered)

Features

To Order, Specify:

• Convert non-powered panels to powered panels. • Price of straight powered raceway kits includes one power distribution assembly, powered raceway cover, and flexible power connector. • Not for use with power sources other than 120 volt 60 hertz.

1) Product number.

C

R

US

Class AA

24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm)

RKP-2-6 RKP-30-6 RKP-3-6 RKP-42-6 RKP-4-6 RKP-54-6 RKP-5-6

$380 380 380 380 380 380 380

2) Trim color. $14 upcharge (list) for Metallic trim color.

Specification Tip • For use with UniGroup Too, UniGroup and PLACES.

Power Breaker Marker

NEP-1

Class FA

Quantity

Number

Price

Fifty(50)

NEP-1

$116

Features

To Order, Specify:

• Use in pairs at adjoining power distribution assemblies in the flex connector sites to prevent improper electrical connections. • Refer to the 6-Circuit Power Base planning guide for details. • Available in standard finish color only.

1) Product number. (No finish specification required.)

Specification Tip • For use with UniGroup Too, UniGroup and PLACES.

SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

159

UniGroup Too Price List

Electrical and Cable Management Ported Raceway Covers for use with UniGroup Too, UniGroup, PLACES

Ported Raceway Covers

PRCN-B (Non-Powered Condition)

Width

Description

18′′(457mm)

One information plate opening, one side

24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 18′′(457mm)

PRCN-B (Non-Powered Condition)

24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 30′′(762mm)

PRCP-B (3-Circuit Powered Condition)

36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 30′′(762mm)

PRCP-B (3-Circuit Powered Condition)

PRCN-B (Non-Powered Condition)

36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 42′′(1067mm) 48′′(1219mm) 60′′(1524mm) 42′′(1067mm)

PRCP-B (3-Circuit Powered Condition)

One information plate opening, each side

Two information plate openings, one side

Two information plate openings, each side

One standard wall outlet opening, one side

One standard wall outlet opening, each side

48′′(1219mm) 60′′(1524mm)

Price

3-Circuit Powered Number

Price

6-Circuit Powered Number

$ 63

PRCP-1118-B

$ 63

NA

PRCN-1124-B PRCN-1130-B PRCN-1136-B PRCN-1142-B PRCN-1148-B PRCN-1154-B PRCN-1160-B PRCN-1218-B

69 72 80 83 86 95 97 $ 72

PRCP-1124-B PRCP-1130-B PRCP-1136-B PRCP-1142-B PRCP-1148-B PRCP-1154-B PRCP-1160-B PRCP-1218-B

69 72 80 83 86 95 97 $ 72

PRCP-1124-6 PRCP-1130-6 PRCP-1136-6 PRCP-1142-6 PRCP-1148-6 PRCP-1154-6 PRCP-1160-6 NA

$ 69 72 80 83 86 95 97 NA

PRCN-1224-B PRCN-1230-B PRCN-1236-B PRCN-1242-B PRCN-1248-B PRCN-1254-B PRCN-1260-B PRCN-2130-B

77 82 86 93 97 104 107 $ 82

PRCP-1224-B PRCP-1230-B PRCP-1236-B PRCP-1242-B PRCP-1248-B PRCP-1254-B PRCP-1260-B PRCP-2130-B

77 82 86 93 97 104 107 $ 82

PRCP-1224-6 PRCP-1230-6 PRCP-1236-6 PRCP-1242-6 PRCP-1248-6 PRCP-1254-6 PRCP-1260-6 PRCP-2130-6

$ 77 82 86 93 97 104 107 $ 82

PRCN-2136-B PRCN-2142-B PRCN-2148-B PRCN-2154-B PRCN-2160-B PRCN-2230-B

86 93 97 103 107 $ 92

PRCP-2136-B PRCP-2142-B PRCP-2148-B PRCP-2154-B PRCP-2160-B PRCP-2230-B

86 93 97 103 107 $ 92

PRCP-2136-6 PRCP-2142-6 PRCP-2148-6 PRCP-2154-6 PRCP-2160-6 PRCP-2230-6

86 93 97 103 107 $ 92

PRCN-2236-B PRCN-2242-B PRCN-2248-B PRCN-2254-B PRCN-2260-B PRCN-0142-B

97 103 107 112 116 $ 83

PRCP-2236-B PRCP-2242-B PRCP-2248-B PRCP-2254-B PRCP-2260-B PRCP-0142-B

97 103 107 112 116 $ 83

PRCP-2236-6 PRCP-2242-6 PRCP-2248-6 PRCP-2254-6 PRCP-2260-6

97 103 107 112 116

PRCN-0148-B PRCN-0160-B PRCN-0242-B

90 97 $ 93

PRCP-0148-B PRCP-0160-B PRCP-0242-B

90 97 $ 93

PRCN-0248-B PRCN-0260-B

97 107

PRCP-0248-B PRCP-0260-B

97 107

Non-Powered Number PRCN-1118-B

Features

Price NA

To Order, Specify:

• Retrofit to UniGroup Too, UniGroup and PLACES panel. 1) Product number. • Ported raceway covers enable communications equipment cabling to 2) Trim color. $14 upcharge (list) for Metallic trim be routed to connector modules located on the faces of the base color. raceway covers. Six variations are available to accommodate the following connector modules: one information plate opening centered on one side of the raceway cover; one information plate opening centered on each side of the raceway cover; two information plate openings on one side; two information plate openings on each side; one standard wall outlet opening centered on one side; and one standard wall outlet opening centered on each side. • Information plate opening measures 1.38′′(35mm) high x 2.7′′(69mm) wide. • Standard wall outlet opening measures 2.25′′(57mm) high x 3.75′′(95mm) wide. • Openings for information plates and standard wall outlets do not include covers.

Specification Tips • Specify when no raceway cover is ordered (option -E). • Not for use with power sources other than 120 volt 60 hertz. • For use with UniGroup Too, UniGroup and PLACES.

160

April 2008 / USA

Class AA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

UniGroup Too Price List

Electrical and Cable Management Chicago Raceway Kits / Receptacles / Base Feed Module for use with UniGroup Too, UniGroup, PLACES Height Dual Power Access Raceway Kit 4′′(102mm) — 4′′-High Base Raceway

RKP-C

C

R

US

Width

Trim Finish Number

Price

18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm)

RKP-18-C RKP-2-C RKP-30-C RKP-3-C RKP-42-C RKP-4-C RKP-54-C RKP-5-C

$267 267 267 267 267 267 267 267

Features

To Order, Specify:

• Includes straight and flexible conduit, metal connectors, including 90° for junctioning, and raceway cover. • Specify receptacles separately. • Two electrical boxes used for junctioning or accepting receptacles.

1) Product number. 2) Trim color.

Specification Tip • For use with UniGroup Too, UniGroup and PLACES.

Power Receptacle — Duplex

Number

Price

PRD-1-C

PRD-1-C

C

R

US

Power Receptacle — Isolated Ground Duplex

PRDI-1-C

C

R

$75

Features

To Order, Specify:

• Includes one receptacle. • Standard in black finish color only.

1) Product number. (No finish specification required.)

Specification Tip • For use with UniGroup Too, UniGroup and PLACES.

PRDI-1-C

$110

Features

To Order, Specify:

• Includes one receptacle. • Standard in orange finish color only.

1) Product number. (No finish specification required.)

Specification Tip • For use with UniGroup Too, UniGroup and PLACES.

US

/

Base Feed Module

BFM-1-C

C

R

US

Number

Price

BFM-1-C

$124

Features

To Order, Specify:

• Includes 48′′(1219mm) of vinyl-covered, 1/2′′(13mm) flexible conduit, metal elbow hardware, and metal cover plate with attachment hardware. • Standard in charcoal finish color only. • This product may be used in any Haworth UniGroup electrical installation in Chicago.

1) Product number. (No finish specification required.)

Specification Tip • For use with UniGroup Too, UniGroup and PLACES.

Class AA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

161

UniGroup Too Price List

Electrical and Cable Management Chicago Hardwire / International Top Feed Modules for use with UniGroup Too, UniGroup, PLACES

UniGroup Too, UniGroup, PLACES Chicago Hardwire / International Top Feed Module

E2FM-PL

Panel Height

Pole Length

Number

Price

30′′(762mm) - 32′′(813mm) 37′′(940mm) - 56′′(1422mm) 64′′(1626mm) - 72′′(1829mm) 80′′(2032mm) - 82′′(2083mm)

102′′(2591mm) 90′′(2286mm) 68′′(1727mm) 50′′(1270mm)

E2FM-22-PL E2FM-24-PL E2FM-26-PL E2FM-28-PL

$321 310 299 288

Features

To Order, Specify:

• Includes raceway, junction box with cover, ceiling bezel and top cap covers for UniGroup Too, UniGroup and PLACES. • For use with Chicago Hardwire applications and with 4 meter Power Logic cord, ordered separately from Power Logic. • Required when the building’s power source must be accessed from the ceiling plenum and routed to the base raceway. • Refer to Specification Guide for cable management. • For use with ceilings up to 10′(3048mm) high. • When used with steel top cap, field cutting of top cap is required. When used with wood top caps, access hole must be cut into top cap.

1) Product number. 2) Trim color. $14 upcharge (list) for Metallic trim color. 3) Trim color for top cap piece. $14 upcharge (list) for Metallic trim color.

Specification Tips • Use to feed Power Logic receptacles or Chicago Hardwire Raceway installed in the base raceway of the panel. • For Chicago Hardwire applications, conduit must be field supplied. • Not for use with glazed add-on panels, glazed and open frame panels or single doors.

International Power Components

For power applications outside North America we recommend the use of Power Logic soft wiring components. Power Logic offers a system of single circuit power cords and receptacle modules that fit into our non-powered base raceway. Receptacle modules are offered with two sockets (3 and 4 socket versions also available). Each receptacle module has sockets, switches and fuses that are appropriate for each country around the world. Contact the Power Logic regional sales office in your area to help with planning details to assure local electrical code compliance. Contact Power Logic via the Haworth/Power Logic website, (www.haworth.com/powerlogic), or through their corporate offices in Cape Town, South Africa at 27-21-704-1450. Power Logic also offers power solutions for desktop, conference table or freestanding power applications.

Power Entry Cord

162

April 2008 / USA

Cord

Receptacle

Class AC Canadian Conversion Factor: Refer to haworth.com/Canada

Splitter

UniGroup Too Price List

Electrical and Cable Management Power Connectors for use with UniGroup Too, UniGroup, PLACES Number

Price

Straight-Span Power Connector PCSS-3-B

PCSS-3-B

C

R

US

$91

Features

To Order, Specify:

• Continues power along a straight panel run intersected by non-powered panel(s) configured in a three- or four-way configuration resulting in a 2′′(51mm) gap. • Retaining clips attached. • Ordered separately. • Finish post or power connector cover is required by UL for covering straight-span power connector. • 2′′(51mm) longer than flexible connector listed below. • Standard in charcoal finish color only. • Not for use with power sources other than 120 volt 60 hertz.

1) Product number. (No finish specification required.)

Specification Tip • For use with UniGroup Too, UniGroup and PLACES.

Flexible Power Connector

PCF-3-B

C

R

US

PCF-3-B

$93

Features

To Order, Specify:

• Completes electrical circuit between adjacent powered panels in straight or angled conditions. • Finish post or power connector cover is required by UL for covering flexible power connector. • Retaining clips attached. Note: 0.95 flexible power connector is shipped with each powered panel. • Standard in charcoal finish color only. • Not for use with power sources other than 120 volt 60 hertz.

1) Product number. (No finish specification required.)

Specification Tip • For use with UniGroup Too, UniGroup and PLACES.

Connector Assembly — 12′′ Pass-Through

PCOF-1-B

$95

Features

To Order, Specify:

• 12′′(305mm) panel pass-through. • Price includes flexible power connector only.

1) Product number. (No finish specification required.)

Specification Tip • For use with UniGroup Too, UniGroup and PLACES. PCOF-1-B

C

R

US

Class AA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

163

UniGroup Too Price List

Electrical and Cable Management Extended Power Connectors for use with UniGroup Too, UniGroup, PLACES

Extended Power Connector — Short Width

Straight Span Condition PCE-BS

C

R

Panel Width

Number

Price

18′′(457mm)

PCE-18-BS

$99

Features

To Order, Specify:

• Spans power through one or more non-powered panel(s) located between powered panels. • Extended power connectors cannot be coupled together. • The above product numbers are used in straight span conditions only. • Standard in charcoal finish color only. • Not for use with power sources other than 120 volt 60 hertz.

1) Product number. (No finish specification required.)

Specification Tip • For use with UniGroup Too, UniGroup and PLACES.

US

Extended Power Connector — Medium Width

90° Condition

12′′(305mm) 18′′(457mm)

PCE-12-BM PCE-18-BM

$99 99

Features

To Order, Specify:

• Spans power through one or more non-powered panel(s) located between powered panels. • Extended power connectors cannot be coupled together. • The above product numbers are used in 90° and 3-way conditions only. • Standard in charcoal finish color only. • Not for use with power sources other than 120 volt 60 hertz.

1) Product number. (No finish specification required.)

Specification Tip • For use with UniGroup Too, UniGroup and PLACES. 3-Way Condition PCE-BM

C

R

US

Extended Power Connector — Long Width

U Condition Z Condition

12′′(305mm) 18′′(457mm)

PCE-12-BL PCE-18-BL

Features

To Order, Specify:

• Spans power through one or more non-powered panel(s) located between powered panels. • Extended power connectors cannot be coupled together. • The above product numbers are used in Z and U conditions; or where the PCE must make a 90° turn and span a 3-way intersection. • Standard in charcoal finish color only. • Not for use with power sources other than 120 volt 60 hertz.

1) Product number. (No finish specification required.)

Specification Tip • For use with UniGroup Too, UniGroup and PLACES.

90° and 3-Way Condition PCE-BL

C

R

164

US

April 2008 / USA

$99 99

Class AA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

UniGroup Too Price List

Electrical and Cable Management End Cap / Communication Junction Box for use with UniGroup Too, UniGroup, PLACES

Base Raceway End Cap

Height

Number

Price

4′′(102mm)

EC-10-B

$18

Features

To Order, Specify:

• Includes ten end caps. • For use at base raceway for end-of-run panel condition.

1) Product number.

Note: .6 end caps included with every panel. Order additional as necessary.

2) Trim color. $14 upcharge (list) for Metallic trim color.

EC-10-B

Communication Junction Box

CJB-1

Height

Length

Width

Number

Price

2′′(51mm)

4 1/4′′(108mm)

4 1/4′′(108mm)

CJB-1

$42

Features

To Order, Specify:

• Includes one junction box. • Specify when the space above the ceiling is part of the building’s ventilation system and required by local code authority.

1) Product number. (No finish specification required.)

Specification Tip • For use with UniGroup Too, UniGroup and PLACES.

Class AA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

165

UniGroup Too Price List

Electrical and Cable Management Vertical Wire Managers for use with UniGroup Too, UniGroup, PLACES

Vertical Wire Manager

Height

Inside Diameter

Number

Price

17 1/2′′(444mm)

7/16′′(11mm)

WC-17

$81

Features

To Order, Specify:

• Includes ten vertical wire managers. • Vertically routes and conceals cords along panel surface above or below the worksurface. • Wire manager extends 1/2′′(13mm) from panel surface. • Standard in black finish only.

1) Product number. (No finish specification required.)

Specification Tips

WC-17

• Suggested application: use to conceal single task light cord between overhead storage and worksurface. • May be field cut to appropriate size. • Panel side rails will not accommodate multiple components in the same location. • For use with UniGroup Too, UniGroup and PLACES.

Vertical Wire Channel

Height

Width

Depth

Number

Price

72′′(1829mm)

3/4′′(19mm)

3/4′′(19mm)

WC-6

$21

Features

To Order, Specify:

• • • •

1) Product number.

Includes field-cuttable channel. Guides wires or cables vertically. Inserts into the panel side rail reveals. Not available for use in the city of Los Angeles.

WC-6

Specification Tip • For use with UniGroup Too, UniGroup and PLACES.

166

April 2008 / USA

Class AA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

2) Trim color.

UniGroup Too Price List

Electrical and Cable Management Expanded Top Caps for use with UniGroup Width

Number

Price

Expanded Top Cap Raceway

12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 60′′(1524mm)

ETCR-12 ETCR-18 ETCR-24 ETCR-30 ETCR-36 ETCR-42 ETCR-48 ETCR-60

$ 81 86 96 100 105 111 118 128

ETCR

Features

To Order, Specify:

• Includes channel and top cap. • Refer to specification guide for cable management. • Replaces the panel’s top cap and adds 2′′(51mm) to the panel’s height.

1) Product number.

Expanded Top Finish Cap

FC-1

FC-3

FC-2

FC-4

2) Trim color.

Description

Number

Price

End-of-Run Cap Two-Way Three-Way Four-Way 90° Corner

FC-1 FC-2 FC-3 FC-4 FC-90

$29 22 35 45 28

Features

To Order, Specify:

• Includes cover. • Used to join expanded top caps in a panel run. • Two-way cap is for straight connection over a straight finish post. • Three-way cap is for connections of three panels. • Four-way cap is for connections of four panels. • 90° corner cap is for use in conjunction with a 90° finish post. • End-of-run cap is used at an end-of-panel-run condition.

1) Product number. 2) Trim color.

FC-90

Class AA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

167

UniGroup Too Price List

Electrical and Cable Management Ported Panel Cover Plates for use with PLACES

Ported Panel Cover Plates

HPPC-0001

HPPC-0002

HPPC-0003

HPPC-0004

HPPC-0005

HPPC-0008

168

April 2008 / USA

Height

Width

Description

Number

Price

11′′(279mm)

6′′(152mm)

Blank Electrical access only Electrical access and one standard wall outlet interface module opening Electrical access and two information plate interface module openings Fabric-covered blank Two information plate interface modular openings

HPPC-0001 HPPC-0002 HPPC-0003

$28 28 28

HPPC-0004

28

HPPC-0005 HPPC-0008

43 28

Features

To Order, Specify:

• Cable interface connector modules snap into the openings on the face of cover plate HPPC-0003, HPPC-0004 and HPPC-0008. • Pre-configured cable interface connector modules must be purchased from their respective manufacturers. HAWORTH does not furnish these modules. • Power receptacles for The Power Base must be ordered separately when specifying cover plates that provide electrical access. • Standard wall outlet opening measures 2.00′′(51mm) x 2.75′′(70mm). • Information plate opening measures 1.38′′(35mm) x 2.70′′(69mm). Not for use with power sources other than 120 volt 60 hertz.

1) Product number.

Class BA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

2) Trim color or fabric surface and color.

UniGroup Too Price List

Electrical and Cable Management Chicago Ported Panel Cover Plates for use with PLACES

Chicago Ported Panel Cover Plates

HPPC-0002-CU

Height

Width

Description/Receptacle Location

Number

Price

11′′(279mm)

6′′(152mm)

Electrical access only/upper Electrical access only/lower Electrical access/upper and 1 DEC or AT&T interface module opening Electrical access/lower and 1 DEC or AT&T interface module opening Electrical access/upper and 2 AMP interface module openings Electrical access/lower and 2 AMP interface module openings Fabric-covered blank

HPPC-0002-CU HPPC-0002-CL HPPC-0003-CU

$28 28 28

HPPC-0003-CL

28

HPPC-0004-CU

28

HPPC-0004-CL

28

HPPC-0005-C

43

HPPC-0002-CL

HPPC-0003-CU

HPPC-0003-CL

HPPC-0004-CU

HPPC-0004-CL

Features

To Order, Specify:

• Cable interface connector modules snap into the openings on the face of cover plate HPPC-0003 and HPPC-0004. • Preconfigured cable interface connector modules must be purchased from their respective manufacturers. HAWORTH does not furnish these modules. • Power receptacles must be ordered separately when specifying cover plates that provide electrical access. • Chicago Electrical Codes require receptacles in back-to-back applications to be staggered, one above the other. Therefore, when ordering HFP-1CW, HFP-1CT, HFP-1C panels (one back-to-back port) and HFP-4CW, HFP-4CT, HFP-4C panels (two back-to-back ports), specify one pair of ‘‘upper’’ (HPPC-CU) and ‘‘lower’’ (HPPC-CL) cover plates for each back-to-back port.

1) Product number. 2) Trim color or fabric surface and color.

HPPC-0005-C

Class BA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

169

UniGroup Too Price List

Electrical and Cable Management Desktop Port for use with UniGroup Too, UniGroup, PLACES

Desktop Port

BEDP

Description

Height

Width

Number

Price

Desktop Port with 6′(1829mm) cord Desktop Port with 12′(3658mm) cord

3 1/2′′(89mm)

9 5/8′′(244mm)

BEDP-6 BEDP-12

$256 256

Features

To Order, Specify:

• 6′(1829mm) or 12′(3658mm) black cord option. • Three power outlets and one modular furniture telecommunications outlet opening [1.38′′(25mm) x 2.71′′(69mm)] with blank cover. • Mounts on worktops from 3/4′′(19mm) to 1 3/4′′(44mm) thick. • Not available for use in Los Angeles, Chicago or New York. • Power can be routed from panel, floor or wall. • Allows for off-modularity. • Module and bracket available in graphite finish only with black cord. • Not for power sources other than 120 volt 60 hertz. • Shipped assembled.

1) Product number. (No finish specification required.)

Specification Tips • Attaches to back edge of worktop with threaded knob. • Power cord plugs into receptacle outlet or into a building outlet. Desktop ports cannot be linked together. • Communication info plates must be field supplied. • Cord use should be reviewed by local authorities (electrical inspector) prior to ordering. • For worksurfaces without wireway install desktop port prior to attaching worksuface to panel. • May cause interference with panel-mounted accessories such as tackboards, slat pads, markerboards, etc.

170

April 2008 / USA

Class IF – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

UniGroup Too Price List

Electrical and Cable Management Flip Top Units for use with UniGroup Too, UniGroup, PLACES Bezel Depth

Width Flip Top Unit

Configuration

Number

Price

2 Power, 2 Data 3 Power, 1 Data 3 Power, 3 Data 4 Power, 2 Data

EUE1-0000-1221W EUE1-0000-1311W EUE1-0000-1331W EUE1-0000-1421W

$375 375 375 375

2 Power, 2 Data 3 Power, 1 Data 3 Power, 3 Data 4 Power, 2 Data

EUE2-0000-1221W EUE2-0000-1311W EUE2-0000-1331W EUE2-0000-1421W

$750 750 750 750

Hardwire Single-Sided Outlets 8 5/16′′(211mm) 4 3/8′′(111mm) 11 1/4′′(286mm)

2 Power, 2 Data 3 Power, 3 Data

EUE1-0000-C221W EUE1-0000-C331W

$428 428

Hardwire Double-Sided Outlets 8 5/16′′(211mm) 8′′(203mm) 11 1/4′′(286mm)

2 Power, 2 Data 3 Power, 3 Data

EUE2-0000-C221W EUE2-0000-C331W

$856 856

Corded Single-Sided Outlets 8 5/16′′(211mm) 4 3/8′′(111mm) 11 1/4′′(286mm)

Corded Double-Sided Outlets 8 5/16′′(211mm) 8′′(203mm) EUE1-1331W

11 1/4′′(286mm)

EUE2-1331W

EUE1-C331W

EUE2-C331W

Features

To Order, Specify:

• Hardwire flip top unit includes one flip top unit with power outlets and communication openings, mounting clips, 6 foot flexible metal conduit feed with wires for hardwire, multiple data jack adapters to accommodate most varieties of field supplied data jacks, also includes blank data covers. • Corded flip top unit includes one flip top unit with power outlets and communication openings, 12 foot long – 15-amp cord with plug, mounting clips, multiple data jack adapters to accommodate most varieties of field supplied data jacks, also includes blank data covers. • Flip top unit is flush mounted with spring release cover. • Flip top unit overall height is 2 3/4′′(70mm) and will extend below worksurfaces. • Standard in anodized finish. • Ships assembled.

1) Product number. (No finish specification required.)

Specification Tips • Flip top unit plug-in cord drops down from bottom of unit to plug into external power outlet. • Flip top unit can be field retrofitted. Refer to Specification Guide. • For use with 120 volt 60 hertz power source only. • Hardwired applications should be reviewed by local authorities (electrical inspector) prior to ordering.

Class PT – GSA: Open Market Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

171

UniGroup Too Price List

Electrical and Cable Management Power/Data Domes for use with UniGroup Too, UniGroup, PLACES

Power/Data Dome

JAP-2

JAP-4

Class FM

Description

Number

Price

Two (2) power outlets and two (2) plates for data connection Four (4) power outlets

JAP-2 JAP-4

$170 186

Features

To Order, Specify:

• • • • • •

1) Product number. (No finish specification required.)

Provides power and communication access at desk height. Field installed. Mounts into 3′′(76mm) diameter hole. Available in black finish color only. Power cord is 72′′(1829mm) long. Cut for cutouts for data connectors. 4TWP-2 includes a voice/data adapter kit to accept couplers and jacks.

JAP-2 Data Connection Cutout Sizes

Frame Dimensions 1.060 1.060

0.745

0.585 Connector Cutout It is recommended that the cutout sizes are confirmed before ordering connectors from suppliers.

Worksurface Grommet

WUAC-WSG

Class CA

Height

Inside Diameter

Outside Diameter

Number

Price

1′′(25mm)

2 3/4′′(70mm)

3′′(76mm)

WUAC-WSG

$13

Features

To Order, Specify:

• Includes one cover. • Must be field-installed. • Available in charcoal color only.

1) Product number. (No finish specification required.)

Available on RUSH.

172

April 2008 / USA

SIN 711-2; Discount Group II Canadian Conversion Factor: Refer to haworth.com/Canada

UniGroup Too Price List

This page intentionally blank

April 2008 / USA

173

UniGroup Too Price List

Adaptable Worksurfaces — Laminate

Rectangular

24" x 60"

Features

To Order, Specify:

• • • •

1) Product number.

• • •

24" x 72"

• WURA

• • •

Includes worksurface and tie plate. High-pressure laminate with: –Full perimeter T-mold (T), or –3mm edgeband (J) on user edge and 1mm edgeband on sides and back, or –Cascade (V) on user edge and 1mm edgeband on sides and back. Worksurfaces predrilled to accept most support options. Optional wireway along back edge of worksurface is color-matched to solid side/back edge trim. When wood grain edge trim is specified, wireway will be Charcoal. Refer to Specification Guide for wireway details. 24′′(607mm)- to 60′′(1524mm)-wide worksurfaces have one wireway. Worksurfaces wider than 60′′(1524mm) have two wireways. Installed worksurfaces without wireway will not allow clearance for power plug. Depths and widths shown in nominal dimensions.

T-Mold or Edgeband 2) Laminate surface color. 3) Edge trim color.

Cascade 1) Product number. 2) Laminate surface color. 3) Side/back edgeband trim color. 4) Front Cascade edge trim color.* *Cascade translucent edge is priced as Group II

1 Edge Options: T

T-Mold

J

Edgeband

V

Cascade

Available on RUSH with Standard Core.

Specification Tips • For additional widths to span a 3-way panel condition, refer to panel-specific worksurface section. • Worksurface support specific to product line; must be separately specified. • –Cantilever bracket • –Side brackets • –Worksurface support panel • –Worksurface support column or leg • –Attached lower storage • Intermediate support is required for unsupported worksurface span greater than 60′′(1524mm). Note: Separately specified worksurface reinforcement channels provide additional support for worksurfaces with 50′′(1270mm) spans that are heavily loaded and not otherwise supported by mid-span cantilevers, worksurface support panels, columns, legs or attached lower storage.

174

April 2008 / USA

Class CA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

2 Core Options: S

Standard

G Green, add $94 list.

3 Wireway Options: A Notched B Curved C Without

UniGroup Too Price List

Adaptable Worksurfaces — Laminate

Rectangular

Depth

Width

Laminate Number

18′′(457mm)

24′′(610mm) 26′′(660mm) 30′′(762mm) 32′′(813mm) 36′′(914mm) 38′′(965mm) 42′′(1067mm) 44′′(1118mm) 48′′(1219mm) 50′′(1270mm) 54′′(1372mm) 56′′(1422mm) 60′′(1524mm) 62′′(1575mm) 66′′(1676mm) 68′′(1727mm) 72′′(1829mm) 74′′(1880mm) 78′′(1981mm) 80′′(2032mm) 84′′(2134mm) 86′′(2184mm) 90′′(2286mm) 92′′(2337mm) 96′′(2438mm) 98′′(2489mm) 102′′(2591mm) 104′′(2642mm) 108′′(2743mm) 110′′(2794mm) 114′′(2890mm) 116′′(2946mm) 120′′(3048mm) 24′′(610mm) 26′′(660mm) 30′′(762mm) 32′′(813mm) 36′′(914mm) 38′′(965mm) 42′′(1067mm) 44′′(1118mm) 48′′(1219mm) 50′′(1270mm) 54′′(1372mm) 56′′(1422mm) 60′′(1524mm) 62′′(1575mm) 66′′(1676mm) 68′′(1727mm) 72′′(1829mm) 74′′(1880mm) 78′′(1981mm) 80′′(2032mm) 84′′(2134mm) 86′′(2184mm) 90′′(2286mm) 92′′(2337mm) 96′′(2438mm) 98′′(2489mm) 102′′(2591mm) 104′′(2642mm) 108′′(2743mm) 110′′(2794mm) 114′′(2890mm) 116′′(2946mm) 120′′(3048mm)

WURA-1824-L WURA-1826-L WURA-1830-L WURA-1832-L WURA-1836-L WURA-1838-L WURA-1842-L WURA-1844-L WURA-1848-L WURA-1850-L WURA-1854-L WURA-1856-L WURA-1860-L WURA-1862-L WURA-1866-L WURA-1868-L WURA-1872-L WURA-1874-L WURA-1878-L WURA-1880-L WURA-1884-L WURA-1886-L WURA-1890-L WURA-1892-L WURA-1896-L WURA-1898-L WURA-18A2-L WURA-18A4-L WURA-18A8-L WURA-18B0-L WURA-18B4-L WURA-18B6-L WURA-18C0-L WURA-2424-L WURA-2426-L WURA-2430-L WURA-2432-L WURA-2436-L WURA-2438-L WURA-2442-L WURA-2444-L WURA-2448-L WURA-2450-L WURA-2454-L WURA-2456-L WURA-2460-L WURA-2462-L WURA-2466-L WURA-2468-L WURA-2472-L WURA-2474-L WURA-2478-L WURA-2480-L WURA-2484-L WURA-2486-L WURA-2490-L WURA-2492-L WURA-2496-L WURA-2498-L WURA-24A2-L WURA-24A4-L WURA-24A8-L WURA-24B0-L WURA-24B4-L WURA-24B6-L WURA-24C0-L

24′′(610mm)

1 2 3

(T) T-Mold

(J) Edgeband

(V) Cascade Group I

(V) Cascade Group II

$156 165 171 181 190 193 196 223 250 260 270 279 289 306 322 337 353 364 376 388 400 412 424 427 436 459 469 478 487 497 505 514 518 $174 183 190 199 210 220 231 263 295 307 318 329 339 360 379 398 414 424 434 445 454 464 474 516 485 507 518 528 538 548 558 569 582

$174 184 191 202 212 215 218 248 278 289 300 310 321 340 358 375 392 405 418 431 445 458 471 474 485 510 521 531 541 552 561 571 576 $194 204 212 222 234 245 257 293 328 341 354 366 377 400 421 442 460 471 482 494 505 516 527 573 539 563 575 587 598 609 620 632 646

$187 198 205 217 228 231 234 266 298 310 322 332 344 364 384 402 420 434 448 462 477 490 504 507 519 546 558 568 579 591 601 611 617 $208 219 228 238 251 263 276 314 352 365 379 392 404 428 451 473 492 504 516 529 541 552 564 613 577 603 615 628 640 652 664 676 691

$214 225 232 244 255 258 261 293 325 337 349 359 371 391 411 429 447 461 475 489 504 517 531 534 546 573 585 595 606 618 628 638 644 $235 246 255 265 278 290 303 341 379 392 406 419 431 455 478 500 519 531 543 556 568 579 591 640 604 630 642 655 667 679 691 703 718

Class CA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

175

UniGroup Too Price List

Adaptable Worksurfaces — Laminate

Rectangular

176

April 2008 / USA

Depth

Width

Laminate Number

30′′(762mm)

24′′(610mm) 26′′(660mm) 30′′(762mm) 32′′(813mm) 36′′(914mm) 38′′(965mm) 42′′(1067mm) 44′′(1118mm) 48′′(1219mm) 50′′(1270mm) 54′′(1372mm) 56′′(1422mm) 60′′(1524mm) 62′′(1575mm) 66′′(1676mm) 68′′(1727mm) 72′′(1829mm) 74′′(1880mm) 78′′(1981mm) 80′′(2032mm) 84′′(2134mm) 86′′(2184mm) 90′′(2286mm) 92′′(2337mm) 96′′(2438mm) 98′′(2489mm) 102′′(2591mm) 104′′(2642mm) 108′′(2743mm) 110′′(2794mm) 114′′(2890mm) 116′′(2946mm) 120′′(3048mm)

WURA-3024-L WURA-3026-L WURA-3030-L WURA-3032-L WURA-3036-L WURA-3038-L WURA-3042-L WURA-3044-L WURA-3048-L WURA-3050-L WURA-3054-L WURA-3056-L WURA-3060-L WURA-3062-L WURA-3066-L WURA-3068-L WURA-3072-L WURA-3074-L WURA-3078-L WURA-3080-L WURA-3084-L WURA-3086-L WURA-3090-L WURA-3092-L WURA-3096-L WURA-3098-L WURA-30A2-L WURA-30A4-L WURA-30A8-L WURA-30B0-L WURA-30B4-L WURA-30B6-L WURA-30C0-L

1 2 3

(T) T-Mold

(J) Edgeband

(V) Cascade Group I

(V) Cascade Group II

$248 260 271 279 289 296 304 313 331 350 369 388 396 418 440 462 483 493 503 513 523 534 544 546 554 570 579 587 595 603 611 620 702

$276 289 302 311 321 329 338 348 368 389 410 431 440 464 489 513 537 548 559 570 581 593 604 606 615 633 643 652 661 670 679 689 780

$296 310 324 333 344 353 362 372 394 417 439 462 471 497 524 549 575 587 598 610 622 635 646 648 658 677 688 698 707 717 727 737 834

$323 337 351 360 371 380 389 399 421 444 466 489 498 524 551 576 602 614 625 637 649 662 673 675 685 704 715 725 734 744 754 764 861

Class CA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

UniGroup Too Price List

Adaptable Worksurfaces — Laminate

Rectangular Key

Depth

Width

Laminate Number

30′′(762mm)

36′′(914mm) 48′′(1219mm) 48′′(1219mm) 60′′(1524mm) 72′′(1829mm) 60′′(1524mm) 72′′(1829mm) 60′′(1524mm) 72′′(1829mm)

WURY-3036-L WURY-3048-L WURY-3648-L WURY-3660-L WURY-3672-L WURY-4260-L WURY-4272-L WURY-4860-L WURY-4872-L

36′′(914mm)

42′′(1067mm) 48′′(1219mm)

WURY

1 2 3

(T) T-Mold

(J) Edgeband

(V) Cascade Group I

(V) Cascade Group II

$471 486 $501 562 587 $588 607 $616 643

$519 540 $557 624 649 $653 679 $681 714

$557 578 $596 668 693 $699 731 $727 764

$584 605 $623 695 720 $726 758 $754 791

Features

To Order, Specify:

• • • •

1) Product number.

• • • •

• • • •

Includes worksurface and tie plate. High-pressure laminate with: –Full perimeter T-mold (T), or –3mm edgeband (J) on user edge and 1mm edgeband on back, or –Cascade (V) on user edge and 1mm edgeband on sides and back. Worksurface width dimension attaches directly to panel and matches panel width. Worksurfaces predrilled to accept most support options. Optional wireways along back edges are color-matched to solid side/back edge trim. When wood grain laminate is specified, wireways will be Charcoal. Refer to Specification Guide for wireway details. 72′′(1829mm) wide worksurfaces have two wireways when ‘A’ option ordered. Installed worksurfaces without wireway will not allow clearance for power plug. Depths and widths shown in nominal dimensions. Wireway will accommodate end-of-run trim. Available on RUSH with Standard Core.

Specification Tips • Worksurface support specific to product line; must be separately specified. • –Cantilever bracket • –Side brackets • –Worksurface support panel • –Worksurface support column or leg • –Flush mount plates • Worksurface support column is required.

T-Mold or Edgeband 2) Laminate surface color. 3) Edge trim color.

Cascade 1) Product number. 2) Laminate surface color. 3) Side/back edgeband trim color. 4) Front Cascade edge trim color.* *Cascade translucent edge is priced as Group II

1 Edge Options: T

T-Mold

J

Edgeband

V

Cascade

2 Core Options: S

Standard

G Green, add $94 list.

3 Wireway Options: A Notched B Curved C Without

Class CA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

177

UniGroup Too Price List

Adaptable Worksurfaces — Laminate

Rectangular Swell

Depth

Swell Depth

18′′(457mm)

21′′(533mm)

24′′(610mm)

27′′(686mm)

30′′(762mm)

33′′(838mm)

WURS

Width

Laminate Number

24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm)

WURS-1824-L WURS-1830-L WURS-1836-L WURS-1842-L WURS-1848-L WURS-1854-L WURS-1860-L WURS-2424-L WURS-2430-L WURS-2436-L WURS-2442-L WURS-2448-L WURS-2454-L WURS-2460-L WURS-3024-L WURS-3030-L WURS-3036-L WURS-3042-L WURS-3048-L WURS-3054-L WURS-3060-L

1 2 3

(T) T-Mold

(J) Edgeband

(V) Cascade Group I

(V) Cascade Group II

$213 215 218 233 296 319 341 $220 223 226 241 307 331 354 $289 291 294 310 342 374 406

$237 239 243 259 329 355 379 $245 248 252 268 342 368 394 $321 324 327 345 380 416 451

$254 256 261 278 353 380 406 $263 266 270 287 366 394 422 $344 347 350 370 407 446 483

$281 283 288 305 380 407 433 $290 293 297 314 393 421 449 $371 374 377 397 434 473 510

Features

To Order, Specify:

• • • •

1) Product number.

• • •

• •

Includes worksurface and tie plate. High-pressure laminate with: –Full perimeter T-mold (T), or –3mm edgeband (J) on user edge and 1mm edgeband on sides and back, or –Cascade (V) on user edge and 1mm edgeband on sides and back. Worksurfaces predrilled to accept most support options. Optional wireway along back edge of worksurface is color-matched to solid side/back edge trim. When wood grain edge trim is specified, wireway will be Charcoal. Refer to Specification Guide for wireway details. Installed worksurfaces without wireway will not allow clearance for power plug. Depths and widths shown in nominal dimensions. Available on RUSH with Standard Core.

T-Mold or Edgeband 2) Laminate surface color. 3) Edge trim color.

Cascade 1) Product number. 2) Laminate surface color. 3) Side/back edgeband trim color. 4) Front Cascade edge trim color.* *Cascade translucent edge is priced as Group II

1 Edge Options:

Specification Tips

T

T-Mold

• Worksurface support specific to product line; must be separately specified. • –Cantilever bracket • –Side bracket • –Worksurface support panel • –Worksurface support column or leg • Suggested pedestal style is mobile.

J

Edgeband

V

Cascade

Note: Separately specified worksurface reinforcement channels provide additional support for worksurfaces with 50′′(1270mm) spans that are heavily loaded and not otherwise supported by mid-span cantilevers, worksurface support panels, columns or legs.

2 Core Options: S

Standard

G Green, add $94 list.

3 Wireway Options: A Notched B Curved C Without

178

April 2008 / USA

Class CA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

UniGroup Too Price List

Adaptable Worksurfaces — Laminate

Rectangular Inverse Swell

Depth

Swell Depth

18′′(457mm)

15′′(381mm)

24′′(610mm)

21′′(533mm)

30′′(762mm)

27′′(686mm)

WURW

Width

Laminate Number

24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm)

WURW-1824-L WURW-1830-L WURW-1836-L WURW-1842-L WURW-1848-L WURW-1854-L WURW-1860-L WURW-2424-L WURW-2430-L WURW-2436-L WURW-2442-L WURW-2448-L WURW-2454-L WURW-2460-L WURW-3024-L WURW-3030-L WURW-3036-L WURW-3042-L WURW-3048-L WURW-3054-L WURW-3060-L

1 2 3

(T) T-Mold

(J) Edgeband

(V) Cascade Group I

(V) Cascade Group II

$213 215 218 233 296 319 341 $220 223 226 241 307 331 355 $289 291 294 310 342 374 406

$237 239 243 259 329 355 379 $245 248 252 268 342 368 394 $321 324 327 345 380 416 451

$254 256 261 278 353 380 406 $263 266 270 287 366 394 422 $344 347 350 370 407 446 483

$281 283 288 305 380 407 433 $290 293 297 314 393 421 449 $371 374 377 397 434 473 510

Features

To Order, Specify:

• • • •

1) Product number.

• • •

• •

Includes worksurface and tie plate. High-pressure laminate with: –Full perimeter T-mold (T), or –3mm edgeband (J) on user edge and 1mm edgeband on sides and back, or –Cascade (V) on user edge and 1mm edgeband on sides and back. Worksurfaces predrilled to accept most support options. Optional wireway along back edge of worksurface is color-matched to solid side/back edge trim. When wood grain edge trim is specified, wireway will be Charcoal. Refer to Specification Guide for wireway details. Installed worksurfaces without wireway will not allow clearance for power plug. Depths and widths shown in nominal dimensions. Available on RUSH with Standard Core.

T-Mold or Edgeband 2) Laminate surface color. 3) Edge trim color.

Cascade 1) Product number. 2) Laminate surface color. 3) Side/back edgeband trim color. 4) Front Cascade edge trim color.* *Cascade translucent edge is priced as Group II

1 Edge Options:

Specification Tips

T

T-Mold

• Worksurface support specific to product line; must be separately specified. • –Cantilever bracket • –Side brackets • –Worksurface support panel • –Worksurface support column or leg • Suggested pedestal style is mobile.

J

Edgeband

V

Cascade

Note: Separately specified worksurface reinforcement channels provide additional support for worksurfaces with 50′′(1270mm) spans that are heavily loaded and not otherwise supported by mid-span cantilevers, worksurface support panels, columns or legs.

2 Core Options: S

Standard

G Green, add $94 list.

3 Wireway Options: A Notched B Curved C Without

Class CA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

179

UniGroup Too Price List

Adaptable Worksurfaces — Laminate Left/Right Depth Rectangular Transition

24"

18′′(457mm)/24′′(610mm)

18"

24′′(610mm)/18′′(457mm)

WURT-N43

18"

24"

WURT-N34

24′′(610mm)/30′′(762mm)

30′′(762mm)/24′′(610mm)

Width

Laminate Number

24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm)

WURT-2424-L WURT-2430-L WURT-2436-L WURT-2442-L WURT-2448-L WURT-2454-L WURT-2460-L WURT-2424-L WURT-2430-L WURT-2436-L WURT-2442-L WURT-2448-L WURT-2454-L WURT-2460-L WURT-3024-L WURT-3030-L WURT-3036-L WURT-3042-L WURT-3048-L WURT-3054-L WURT-3060-L WURT-3024-L WURT-3030-L WURT-3036-L WURT-3042-L WURT-3048-L WURT-3054-L WURT-3060-L

(V) (V) (T) (J) Cascade Cascade T-Mold Edgeband Group I Group II

1 2 3 N34 N34 N34 N34 N34 N34 N34 N43 N43 N43 N43 N43 N43 N43 N45 N45 N45 N45 N45 N45 N45 N54 N54 N54 N54 N54 N54 N54

To Order, Specify:

• • • •

1) Product number.

• •

• •

Includes worksurface and tie plate. High-pressure laminate with: –Full perimeter T-mold (T), or –3mm edgeband (J) on user edge and 1mm edgeband on sides and back, or –Cascade (V) on user edge and 1mm edgeband on sides and back. Worksurfaces predrilled to accept most support options. Optional wireway along back edge of worksurface is color-matched to solid side/back edge trim. When wood grain edge trim is specified, wireway will be Charcoal. Refer to Specification Guide for wireway details. Installed worksurfaces without wireway will not allow clearance for power plug. Depths and widths shown in nominal dimensions. Available on RUSH with Standard Core.

Specification Tips • Worksurface support specific to product line; must be separately specified. • –Cantilever bracket • –Side brackets • –Worksurface support panel • –Worksurface support column or leg • –Attached lower storage • For worksurfaces less than 42′′(1067mm) wide, suggested pedestal style is mobile. • For worksurfaces greater than 42′′(1067mm) wide, attached pedestal may be installed on deepest side. Note: Separately specified worksurface reinforcement channels provide additional support for worksurfaces with 50′′(1270mm) spans that are heavily loaded and not otherwise supported by mid-span cantilevers, worksurface support panels, columns, legs or attached lower storage.

April 2008 / USA

$261 284 306 328 386 417 448 $261 284 306 328 386 417 448 $270 294 317 341 400 432 464 $270 294 317 341 400 432 464

Features

•

180

$234 255 275 295 347 375 403 $234 255 275 295 347 375 403 $242 264 285 307 360 389 418 $242 264 285 307 360 389 418

Class CA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

$280 304 328 352 413 447 480 $280 304 328 352 413 447 480 $290 315 340 366 428 463 496 $290 315 340 366 428 463 496

$307 331 355 379 440 474 507 $307 331 355 379 440 474 507 $317 342 367 393 455 490 523 $317 342 367 393 455 490 523

T-Mold or Edgeband 2) Laminate surface color. 3) Edge trim color.

Cascade 1) Product number. 2) Laminate surface color. 3) Side/back edgeband trim color. 4) Front Cascade edge trim color.* *Cascade translucent edge is priced as Group II

1 Edge Options: T

T-Mold

J

Edgeband

V

Cascade

2 Core Options: S

Standard

G Green, add $94 list.

3 Wireway Options: A Notched B Curved C Without

UniGroup Too Price List

Adaptable Worksurfaces — Laminate Transitional Left/Right Depth Wedge

18"

24′(610mm)/18′′(457mm)

24"

18′′(457mm)/24′′(610mm)

WURE-N34

24"

18"

WURE-N43

30′′(762mm)/24′′(610mm)

24′′(610mm)/30′′(762mm)

Width

Laminate Number

24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm)

WURE-2424-L WURE-2430-L WURE-2436-L WURE-2442-L WURE-2448-L WURE-2454-L WURE-2460-L WURE-2424-L WURE-2430-L WURE-2436-L WURE-2442-L WURE-2448-L WURE-2454-L WURE-2460-L WURE-3024-L WURE-3030-L WURE-3036-L WURE-3042-L WURE-3048-L WURE-3054-L WURE-3060-L WURE-3024-L WURE-3030-L WURE-3036-L WURE-3042-L WURE-3048-L WURE-3054-L WURE-3060-L

(V) (V) (T) (J) Cascade Cascade T-Mold Edgeband Group I Group II

1 2 3 N43 N43 N43 N43 N43 N43 N43 N34 N34 N34 N34 N34 N34 N34 N54 N54 N54 N54 N54 N54 N54 N45 N45 N45 N45 N45 N45 N45

$239 261 281 301 355 382 411 $239 261 281 301 355 382 411 $247 270 290 313 367 397 426 $247 270 290 313 367 397 426

$266 290 312 335 394 425 457 $266 290 312 335 394 425 457 $275 300 323 348 408 441 473 $275 300 323 348 408 441 473

Features

To Order, Specify:

• • • •

1) Product number.

• • •

• •

Includes worksurface and tie plate. High-pressure laminate with: –Full perimeter T-mold (T), or –3mm edgeband (J) on user edge and 1mm edgeband on sides and back, or –Cascade (V) on user edge and 1mm edgeband on sides and back. Worksurfaces predrilled to accept most support options. Optional wireways along back edges are color-matched to solid side/back edge trim. When wood grain laminate is specified, wireways will be Charcoal. Refer to Specification Guide for wireway details. Installed worksurfaces without wireway will not allow clearance for power plug. Depths and widths shown in nominal dimensions. Available on RUSH with Standard Core.

Specification Tips • Worksurface support specific to product line; must be separately specified. • –Cantilever bracket • –Side brackets • –Worksurface support panel • –Worksurface support column or leg • Suggested pedestal style is mobile. Note: Separately specified worksurface reinforcement channels provide additional support for worksurfaces with 50′′(1270mm) spans that are heavily loaded and not otherwise supported by mid-span cantilevers, worksurface end panels, posts or attached lower storage.

$285 311 334 359 422 455 489 $285 311 334 359 422 455 489 $295 322 346 373 437 472 506 $295 322 346 373 437 472 506

$312 338 361 386 449 482 516 $312 338 361 386 449 482 516 $322 349 373 400 464 499 533 $322 349 373 400 464 499 533

T-Mold or Edgeband 2) Laminate surface color. 3) Edge trim color.

Cascade 1) Product number. 2) Laminate surface color. 3) Side/back edgeband trim color. 4) Front Cascade edge trim color.* *Cascade translucent edge is priced as Group II

1 Edge Options: T

T-Mold

J

Edgeband

V

Cascade

2 Core Options: S

Standard

G Green, add $94 list.

3 Wireway Options: A Notched B Curved C Without

Class CA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

181

UniGroup Too Price List

Adaptable Worksurfaces — Laminate

Rectangular Radius End

(Right-hand orientation)

Depth

Width

Laminate Number

18′′(457mm)

24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm)

WURR-1824-L WURR-1830-L WURR-1836-L WURR-1842-L WURR-1848-L WURR-1854-L WURR-1860-L WURR-2424-L WURR-2430-L WURR-2436-L WURR-2442-L WURR-2448-L WURR-2454-L WURR-2460-L WURR-3024-L WURR-3030-L WURR-3036-L WURR-3042-L WURR-3048-L WURR-3054-L WURR-3060-L

24′′(610mm)

(Left-hand orientation) WURR

30′′(762mm)

1 2 3 4

(T) T-Mold

(J) Edgeband

(V) Cascade Group I

(V) Cascade Group II

$206 212 234 260 330 355 380 $213 218 242 268 340 366 392 $307 314 331 351 380 406 431

$230 236 261 289 367 395 422 $237 243 269 298 378 407 436 $342 349 368 390 422 451 479

$247 253 280 310 393 423 452 $254 261 289 319 405 436 467 $366 374 394 418 452 483 513

$274 280 307 337 420 450 479 $281 288 316 346 432 463 494 $393 401 421 445 479 510 540

Features

To Order, Specify:

• • • •

1) Product number.

• • •

• •

Includes worksurface and tie plate. High-pressure laminate with: –Full perimeter T-mold (T), or –3mm edgeband (J) on user edge and 1mm edgeband on sides and back, or –Cascade (V) on user edge and 1mm edgeband on sides and back. Worksurfaces predrilled to accept most support options. Optional wireway along back edge of worksurface is color-matched to solid side/back edge trim. When wood grain edge trim is specified, wireway will be Charcoal. Refer to Specification Guide for wireway details. Installed worksurfaces without wireway will not allow clearance for power plug. Depths and widths shown in nominal dimensions. Available on RUSH with Standard Core.

April 2008 / USA

2) Laminate surface color. 3) Edge trim color.

Cascade 1) Product number. 2) Laminate surface color. 3) Side/back edgeband trim color. 4) Front Cascade edge trim color.* *Cascade translucent edge is priced as Group II

1 Edge Options:

Specification Tips

T

T-Mold

• Worksurface support specific to product line; must be separately specified. • –Cantilever bracket • –Side brackets • –Worksurface support panel • –Worksurface support column or leg • –Attached lower storage (for worksurfaces greater than 36′′ wide) • For T-mold and edgeband • –18′′(457mm) specify the standard mini cantilever bracket for radius end. • –24′′(610mm)-30′′(762mm) specify standard cantilever bracket for radius end. • When using snap-n-fit cantilevers for 18′′(457mm) and 24′′(610mm) requires mini snap-n-fit cantilever, 30′′(762mm) requires standard snap-n-fit cantilever. • For Cascade edge, for aesthetic reasons, use: • –Side brackets (PLACES and UniGroup) and column support or leg. • For worksurfaces less than 42′′(1067mm) wide, suggested pedestal style is mobile.

J

Edgeband

V

Cascade

Note: Separately specified worksurface reinforcement channels provide additional support for worksurfaces with 50′′(1270mm) spans that are heavily loaded and not otherwise supported by mid-span cantilevers, worksurface support panels, posts or attached lower storage.

182

T-Mold or Edgeband

Class CA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

2 Core Options: S

Standard

G Green, add $94 list.

3 Wireway Options: A Notched B Curved C Without

4 Orientation (as seated): R Right-hand L

Left-hand

UniGroup Too Price List

Adaptable Worksurfaces — Laminate

Rectangular — Split Top

Depth

Width

Laminate Number

24′′(610mm)

36′′(914mm) 42′′(1067mm) 48′′(1219mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm)

WURK-2436-L WURK-2442-L WURK-2448-L WURK-3036-L WURK-3042-L WURK-3048-L

30′′(762mm)

1 2 3

(T) T-Mold

(J) Edgeband

(V) Cascade Group I

(V) Cascade Group II

$1231 1281 1331 $1307 1357 1406

$1443 1502 1559 $1519 1578 1634

$1549 1612 1673 $1625 1688 1748

$1576 1639 1700 $1652 1715 1775

Features

WURK

To Order, Specify:

• Includes rear worksurface, front worksurface, mechanism, and tie plate. • Dual worksurfaces with a 1′′(25mm) space between the front and rear worksurfaces. Front worksurface is 12′′(305mm) deep. • High-pressure laminate with: • –3mm full perimeter T-mold (T), or • –3mm edgeband (J) or Cascade (V) edge on front and rear front edge, and 1mm on back and side edge of front worksurface. • Adjustable front worksurface is attached to the rear worksurface with a spring-assist mechanism. • Front worksurface manually adjusts to any position 7′′(178mm) above and 5 3/4′′(146mm) below the rear worksurface. • Front worksurface tilts -15° to +9°. • Spring assist mechanism available in charcoal finish color only. • Optional wireway along back edge of worksurface is color-matched to solid side/back edge trim. When wood grain edge trim is specified, wireway will be Charcoal. • Installed worksurfaces without wireway will not allow clearance for power plug. • Depths and widths shown in nominal dimensions. Available on RUSH with Standard Core.

Specification Tips • Fixed-height rear worksurface is predrilled to accept standard cantilever brackets. If using snap-n-fit cantilever on 24′′(610mm) deep worksurfaces, specify snap-n-fit mini cantilever. • Worksurface support specific to product line; must be separately specified. • –Cantilever bracket • –Side brackets • –Worksurface support panel • –Worksurface support column or leg

Class CA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

T-Mold or Edgeband 1) Product number. 2) Laminate surface color. 3) Edge trim color.

Cascade 1) Product number. 2) Laminate surface color. 3) Side/back edgeband trim color. 4) Front Cascade edge trim color.* *Cascade translucent edge is priced as Group II

1 Edge Options: T

T-Mold

J

Edgeband

V

Cascade

2 Core Options: S

Standard

G Green, add $94 list.

3 Wireway Options: A Notched B Curved C Without

April 2008 / USA

183

UniGroup Too Price List

Adaptable Worksurfaces — Laminate Left/Right Depth Corner, 90° Straight Front

18′′(457mm)

24′′(610mm)

30′′(762mm)

WUCA

Width

Laminate Number

36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm)

WUCA-3636-L WUCA-4242-L WUCA-4848-L WUCA-5454-L WUCA-3636-L WUCA-4242-L WUCA-4848-L WUCA-5454-L WUCA-3636-L WUCA-4242-L WUCA-4848-L WUCA-5454-L

1 2 3

$374 409 485 516 $388 423 499 530 $460 495 571 602

$414 455 539 573 $428 469 553 587 $500 541 625 659

To Order, Specify:

• • • •

1) Product number.

• •

Includes worksurface and tie plate. High-pressure laminate with: –Full perimeter T-mold (T), or –3mm edgeband (J) on user edge and 1mm edgeband on sides and back. Worksurfaces predrilled to accept most support options. Optional wireway along back edges of worksurface is color-matched to solid side/back edge trim. When wood grain edge trim is specified, wireway will be Charcoal. Installed worksurfaces without wireway will not allow clearance for power plug. Depths and widths shown in nominal dimensions. Available on RUSH with Standard Core.

Specification Tips • Rear corner bracket is required and must be separately specified. • Worksurface support specific to product line; must be separately specified. • –Rear corner bracket - REQUIRED • –Cantilever bracket • –Worksurface support panel • –Side brackets • Recommend the AKPM-23 or AKPS-5 keyboard pad for 36′′(914mm)-wide corners. • Due to manufacturing restrictions, not available with Cascade edge.

April 2008 / USA

(J) Edgeband

Features

• •

184

N33 N33 N33 N33 N44 N44 N44 N44 N55 N55 N55 N55

(T) T-Mold

Class CA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

T-Mold or Edgeband 2) Laminate surface color. 3) Edge trim color.

1 Edge Options: T

T-Mold

J

Edgeband

2 Core Options: S

Standard

G Green, add $94 list.

3 Wireway Options: A Notched B Curved C Without

UniGroup Too Price List

Adaptable Worksurfaces — Laminate Left/Right Depth Corner, 90° Wrap-Around

18′′(457mm)

24′′(610mm)

30′′(762mm)

WUCR

Width 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm)

Laminate Number WUCR-3636-L WUCR-4242-L WUCR-4848-L WUCR-5454-L WUCR-3636-L WUCR-4242-L WUCR-4848-L WUCR-5454-L (1) WUCR-3636-L WUCR-4242-L WUCR-4848-L WUCR-5454-L

1 2 3 N33 N33 N33 N33 N44 N44 N44 N44 N55 N55 N55 N55

(T) T-Mold

(J) Edgeband

(V) Cascade Group I

(V) Cascade Group II

$355 391 462 516 $369 405 476 530 $441 477 548 602

$395 442 529 596 $409 456 543 610 $481 528 615 682

$423 465 549 613 $437 479 563 627 N/A 551 635 699

$450 492 576 640 $464 506 590 654 N/A 578 662 726

(1)

Cascade edge option not available in this size.

Features

To Order, Specify:

• • • •

1) Product number.

• • •

• •

Includes worksurface. High-pressure laminate with: –Full perimeter T-mold (T), or –3mm edgeband (J) on user edge and 1mm edgeband on sides and back, or –Cascade (V) on user edge and 1mm edgeband on sides and back. Worksurfaces predrilled to accept most support options. Optional wireway along back edges of worksurface is color-matched to solid side/back edge trim. When wood grain edge trim is specified, wireway will be Charcoal. Refer to Specification Guide for wireway details. Installed worksurfaces without wireway will not allow clearance for power plug. Depths and widths shown in nominal dimensions. Available on RUSH with Standard Core.

T-Mold or Edgeband 2) Laminate surface color. 3) Edge trim color.

Cascade 1) Product number. 2) Laminate surface color. 3) Side/back edgeband trim color. 4) Front Cascade edge trim color.* *Cascade translucent edge is priced as Group II

1 Edge Options:

Specification Tips

T

T-Mold

• Rear corner bracket is required and must be separately specified. • Worksurface support specific to product line; must be separately specified. • –Rear corner bracket - REQUIRED • –Cantilever bracket • –Worksurface support panel • –Side brackets • Recommend the AKPM-23 or AKPS-5 keyboard pad for 36′′(914mm)-wide corners.

J

Edgeband

V

Cascade

2 Core Options: S

Standard

G Green, add $94 list.

3 Wireway Options: A Notched B Curved C Without

Class CA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

185

UniGroup Too Price List

Adaptable Worksurfaces — Laminate Left/Right Depth Corner, 90° Notched

18′′(457mm)

24′′(610mm)

30′′(762mm)

WUCN

Width 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm)

Laminate Number WUCN-3636-L WUCN-4242-L WUCN-4848-L WUCN-5454-L WUCN-3636-L WUCN-4242-L WUCN-4848-L WUCN-5454-L (1) WUCN-3636-L WUCN-4242-L WUCN-4848-L WUCN-5454-L

1 2 3 N33 N33 N33 N33 N44 N44 N44 N44 N55 N55 N55 N55

(T) T-Mold

(J) Edgeband

(V) Cascade Group I

(V) Cascade Group II

$360 402 483 574 $374 416 497 588 $386 428 509 600

$400 447 537 628 $414 461 551 642 $426 473 563 654

$428 479 575 666 $442 493 589 686 N/A 505 601 698

$455 506 602 693 $469 520 616 713 N/A 532 628 725

(1)

Cascade edge option not available in this size.

Features

To Order, Specify:

• • • •

1) Product number.

• • •

• •

Includes worksurface. High-pressure laminate with: –Full perimeter T-mold (T), or –3mm edgeband (J) on user edge and 1mm edgeband on sides and back, or –Cascade (V) on user edge and 1mm edgeband on sides and back. Worksurfaces predrilled to accept an adjustable keyboard and most support options. Optional wireways along back edges are color-matched to solid side/back edge trim. When wood grain laminate is specified, wireways will be Charcoal. Refer to Specification Guide for wireway details. Installed worksurfaces without wireway will not allow clearance for power plug. Depths and widths shown in nominal dimensions. Available on RUSH with Standard Core.

Specification Tips • Rear corner bracket is required and must be separately specified. • Worksurface support specific to product line; must be separately specified. • –Rear corner bracket - REQUIRED • –Cantilever bracket • –Worksurface support panel • –Side brackets • Recommend the AKPM-23 or AKPS-5 keyboard pad for 36′′(914mm)-wide corners.

T-Mold or Edgeband 2) Laminate surface color. 3) Edge trim color.

Cascade 1) Product number. 2) Laminate surface color. 3) Side/back edgeband trim color. 4) Front Cascade edge trim color.* *Cascade translucent edge is priced as Group II

1 Edge Options: T

T-Mold

J

Edgeband

V

Cascade

2 Core Options: S

Standard

G Green, add $94 list.

3 Wireway Options: A Notched B Curved C Without

186

April 2008 / USA

Class CA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

UniGroup Too Price List

Adaptable Worksurfaces — Laminate Left/Right Depth Corner, 90° Angled

18′′(457mm)

24′′(610mm)

30′′(762mm) (Left-hand orientation)

(Right-hand orientation) WUCU

Width

Laminate Number

36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm)

WUCU-3636-L WUCU-4242-L WUCU-4848-L WUCU-5454-L WUCU-3636-L WUCU-4242-L WUCU-4848-L WUCU-5454-L WUCU-3636-L WUCU-4242-L WUCU-4848-L WUCU-5454-L

1 2 3 4 33 33 33 33 44 44 44 44 55 55 55 55

(T) T-Mold

(J) Edgeband

$359 405 485 576 $373 419 499 583 $385 431 511 602

$439 450 539 630 $411 464 553 637 $423 476 565 656

Features

To Order, Specify:

• • • •

1) Product number.

Includes worksurface. High-pressure laminate with: –Full perimeter T-mold (T), or –3mm edgeband (J) on user edge and 1mm edgeband on back. • Optional wireways along back edges are color-matched to solid side/back edge trim. When wood grain laminate is specified, wireways will be Charcoal. Refer to Specification Guide for wireway details. • Installed worksurfaces without wireway will not allow clearance for power plug. • Depths and widths shown in nominal dimensions. Available on RUSH with Standard Core.

Specification Tips • Rear corner bracket is required and must be separately specified. • Worksurface support specific to product line; must be separately specified. • –Rear corner bracket - REQUIRED • –Cantilever bracket • –Worksurface support panel • –Side brackets • Recommend the AKPM-23 or AKPS-5 keyboard pad for 36′′(914mm)-wide corners. • Due to manufacturing restrictions, not available with Cascade edge.

T-Mold or Edgeband 2) Laminate surface color. 3) Edge trim color.

1 Edge Options: T

T-Mold

J

Edgeband

2 Core Options: S

G Green, add $94 list.

3 Wireway Options: A Notched B Curved C Without

4 Orientation (as seated): R Right-hand L

Class CA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

Standard

Left-hand

April 2008 / USA

187

UniGroup Too Price List

Adaptable Worksurfaces — Laminate Left/Right Depth Corner, 90° Wrap-Around Transitional

Width

18′′(457mm)/24′′(610mm)

24′′(610mm)/18′′(457mm)

24"

24′′(610mm)/30′′(762mm)

18"

WUCT-N34

30′′(762mm)/24′′(610mm)

24"

Laminate Number

(V) (V) (T) (J) Cascade Cascade T-Mold Edgeband Group I Group II

1 2 3

36′′(914mm) WUCT-3636-L 42′′(1067mm) WUCT-4242-L 48′′(1219mm) WUCT-4848-L 54′′(1372mm) WUCT-5454-L 36′′(914mm) WUCT-3636-L 42′′(1067mm) WUCT-4242-L 48′′(1219mm) WUCT-4848-L 54′′(1372mm) WUCT-5454-L 36′′(914mm) (1) WUCT-3636-L 42′′(1067mm) WUCT-4242-L 48′′(1219mm) WUCT-4848-L 54′′(1372mm) WUCT-5454-L 36′′(914mm) (1) WUCT-3636-L 42′′(1067mm) WUCT-4242-L 48′′(1219mm) WUCT-4848-L 54′′(1372mm) WUCT-5454-L

N34 N34 N34 N34 N43 N43 N43 N43 N45 N45 N45 N45 N54 N54 N54 N54

$347 380 453 490 $347 380 453 490 $415 457 543 587 $415 457 543 587

$386 423 503 544 $386 423 503 544 $454 500 593 641 $454 500 593 641

$416 457 543 586 $416 457 543 586 N/A 534 633 683 N/A 534 633 683

$443 484 570 613 $443 484 570 613 N/A 561 660 710 N/A 561 660 710

(1)

Cascade edge option not available in these sizes.

18"

WUCT-N43

Features

To Order, Specify:

• • • •

1) Product number.

• • •

• •

Includes worksurface. High-pressure laminate with: –Full perimeter T-mold (T), or –3mm edgeband (J) on user edge and 1mm edgeband on sides and back, or –Cascade (V) user edge and 1mm edgeband on sides and back. Worksurfaces predrilled to accept most support options. Optional wireway along back edges of worksurface is color-matched to solid side/back edge trim. When wood grain edge trim is specified, wireway will be Charcoal. Refer to Specification Guide for wireway details. Installed worksurfaces without wireway will not allow clearance for power plug. Depths and widths shown in nominal dimensions. Available on RUSH with Standard Core.

T-Mold or Edgeband 2) Laminate surface color. 3) Edge trim color.

Cascade 1) Product number. 2) Laminate surface color. 3) Side/back edgeband trim color. 4) Front Cascade edge trim color.* *Cascade translucent edge is priced as Group II

1 Edge Options:

Specification Tips

T

T-Mold

• Rear corner bracket is required and must be separately specified. • Worksurface support specific to product line; must be separately specified. • –Rear corner bracket - REQUIRED • –Cantilever bracket • –Worksurface support panel • –Side brackets • Recommend the AKPM-23 or AKPS-5 keyboard pad for 36′′(914mm)-wide corners.

J

Edgeband

V

Cascade

2 Core Options: S

Standard

G Green, add $94 list.

3 Wireway Options: A Notched B Curved C Without

188

April 2008 / USA

Class CA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

UniGroup Too Price List

Adaptable Worksurfaces — Laminate Transitional Left/Right Depth Corner, 90° Notched Transitional

18′′(457mm)/24′′(610mm)

24′′(610mm)/18′′(457mm)

24"

24′′(610mm)/30′′(762mm)

18"

30′′(762mm)/24′′(610mm)

WUCH-N34

24"

Width

Laminate Number

(V) (V) (T) (J) Cascade Cascade T-Mold Edgeband Group I Group II

1 2 3

36′′(914mm) WUCH-3636-L 42′′(1067mm) WUCH-4242-L 48′′(1219mm) WUCH-4848-L 54′′(1372mm) WUCH-5454-L 36′′(914mm) WUCH-3636-L 42′′(1067mm) WUCH-4242-L 48′′(1219mm) WUCH-4848-L 54′′(1372mm) WUCH-5454-L 36′′(914mm) (1) WUCH-3636-L 42′′(1067mm) WUCH-4242-L 48′′(1219mm) WUCH-4848-L 54′′(1372mm) WUCH-5454-L 36′′(914mm) (1) WUCH-3636-L 42′′(1067mm) WUCH-4242-L 48′′(1219mm) WUCH-4848-L 54′′(1372mm) WUCH-5454-L

N34 N34 N34 N34 N43 N43 N43 N43 N45 N45 N45 N45 N54 N54 N54 N54

$352 386 459 542 $352 386 459 542 $383 417 490 573 $383 417 490 573

$391 429 510 602 $391 429 510 602 $422 460 541 633 $422 460 541 633

$419 459 546 644 $419 459 546 644 N/A 490 577 675 N/A 490 577 675

$446 486 573 671 $446 486 573 671 N/A 517 604 702 N/A 517 604 702

(1)

Cascade edge option not available in these sizes.

WUCH-N43

18"

Features

To Order, Specify:

• • • •

1) Product number.

• • •

• •

Includes worksurface. High-pressure laminate with: –Full perimeter T-mold (T), or –3mm edgeband (J) on user edge and 1mm edgeband on back. –Cascade (V) user edge and 1mm edgeband on sides and back. Worksurfaces predrilled to accept an adjustable keyboard and most support options. Optional wireways along back edges are color-matched to solid side/back edge trim. When wood grain laminate is specified, wireways will be Charcoal. Refer to Specification Guide for wireway details. Installed worksurfaces without wireway will not allow clearance for power plug. Depths and widths shown in nominal dimensions. Available on RUSH with Standard Core.

Specification Tips • Rear corner bracket is required and must be separately specified. • Worksurface support specific to product line; must be separately specified. • –Rear corner bracket - REQUIRED • –Cantilever bracket • –Worksurface support panel • –Side brackets • Recommend the AKPM-23 or AKPS-5 keyboard pad for 36′′(914mm)-wide corners.

T-Mold or Edgeband 2) Laminate surface color. 3) Edge trim color.

Cascade 1) Product number. 2) Laminate surface color. 3) Side/back edgeband trim color. 4) Front Cascade edge trim color.* *Cascade translucent edge is priced as Group II

1 Edge Options: T

T-Mold

J

Edgeband

V

Cascade

2 Core Options: S

Standard

G Green, add $94 list.

3 Wireway Options: A Notched B Curved C Without

Class CA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

189

UniGroup Too Price List

Adaptable Worksurfaces — Laminate Transitional Left/Right Depth Corner, 90° Angled Transitional

18′′(457mm)/24′′(610mm)

24′′(610mm)/18′′(457mm)

30"

24"

(Left-hand orientation)

24′′(610mm)/30′′(762mm)

30′′(762mm)/24′′(610mm)

WUCF-N45

30"

24"

(Right-hand orientation) WUCF-N54

Width

Laminate Number

36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm)

WUCF-3636-L WUCF-4242-L WUCF-4848-L WUCF-5454-L WUCF-3636-L WUCF-4242-L WUCF-4848-L WUCF-5454-L WUCF-3636-L WUCF-4242-L WUCF-4848-L WUCF-5454-L WUCF-3636-L WUCF-4242-L WUCF-4848-L WUCF-5454-L

1 2 3 4 34 34 34 34 43 43 43 43 45 45 45 45 54 54 54 54

$308 388 462 547 $308 388 462 547 $339 419 493 578 $339 419 493 578

$343 431 513 607 $343 431 513 607 $374 462 544 638 $374 462 544 638

To Order, Specify:

• • • •

1) Product number.

Includes worksurface. High-pressure laminate with: –Full perimeter T-mold (T), or –3mm edgeband (J) on user edge and 1mm edgeband on sides and back. • Optional wireways along back edges are color-matched to solid side/back edge trim. When wood grain laminate is specified, wireways will be Charcoal. Refer to Specification Guide for wireway details. • Installed worksurfaces without wireway will not allow clearance for power plug. • Depths and widths shown in nominal dimensions.

Specification Tips • Rear corner bracket is required and must be separately specified. • Worksurface support specific to product line; must be separately specified. • –Rear corner bracket - REQUIRED • –Cantilever bracket • –Worksurface support panel • –Side brackets • Recommend the AKPM-23 or AKPS-5 keyboard pad for 36′′(914mm)-wide corners. • Due to manufacturing restrictions, not available with Cascade edge.

T-Mold or Edgeband 2) Laminate surface color. 3) Edge trim color.

1 Edge Options: T

T-Mold

J

Edgeband

2 Core Options: S

Class CA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

Standard

G Green, add $94 list.

3 Wireway Options: A Notched B Curved C Without

4 Orientation (as seated): R Right-hand L

April 2008 / USA

(J) Edgeband

Features

Available on RUSH with Standard Core.

190

(T) T-Mold

Left-hand

UniGroup Too Price List

Adaptable Worksurfaces — Laminate

Corner, 90° Split Top

Left/Right Depth

Width

Laminate Number

24′′(610mm) 30′′(762mm)

48′′(1219mm) 48′′(1219mm)

WUCK-4848-L WUCK-4848-L

1 2 3 N44 N55

(T) T-Mold

(J) Edgeband

(V) Cascade Group I

(V) Cascade Group II

$1507 $1557

$1711 $1761

$1833 $1883

$1860 $1910

Features

WUCK

To Order, Specify:

• Includes rear worksurface, front worksurface, mechanism, and tie plate. • Dual worksurfaces with a 1′′(25mm) space between the front and rear worksurfaces. Front worksurface is 12′′(305mm) deep. • High-pressure laminate with: • –3mm full perimeter T-mold (T), or • –3mm edgeband (J) or Cascade (V) edge on front and rear worksurface front edge, and 1mm on back and side edge of front and rear worksurface. • Adjustable front worksurface is attached to the rear worksurface with a spring-assist mechanism. • Front worksurface manually adjusts to any position 7′′(178mm) above and 5 3/4′′(146mm) below the rear worksurface. • Front worksurface tilts -15° to +9°. • Spring assist mechanism available in charcoal finish color only. • Optional wireway along back edge of worksurface is color-matched to solid side/back edge trim. When wood grain edge trim is specified, wireway will be Charcoal. • Installed worksurfaces without wireway will not allow clearance for power plug. • Depths and widths shown in nominal dimensions. Available on RUSH with Standard Core.

Specification Tips • Rear corner bracket is required and must be separately specified. • Worksurface support specific to product line; must be separately specified. • –Rear corner bracket - REQUIRED • –Cantilever bracket • –Worksurface support panel • –Side brackets • Fixed-height rear worksurface is predrilled to accept standard cantilever brackets. If using snap-n-fit cantilever on 24′′(610mm) deep worksurfaces, specify snap-n-fit mini cantilever.

Class CA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

T-Mold or Edgeband 1) Product number. 2) Laminate surface color. 3) Edge trim color.

Cascade 1) Product number. 2) Laminate surface color. 3) Side/back edgeband trim color. 4) Front Cascade edge trim color.* *Cascade translucent edge is priced as Group II

1 Edge Options: T

T-Mold

J

Edgeband

V

Cascade

2 Core Options: S

Standard

G Green, add $94 list.

3 Wireway Options: A Notched B Curved C Without

April 2008 / USA

191

UniGroup Too Price List

Adaptable Worksurfaces — Laminate

Corner, 90° Wrap-Around Extended

Features

To Order, Specify:

• • • •

1) Product number.

• • 24"

•

24"

(Right-hand orientation)

•

WUCE-R44

•

Includes worksurface and tie plate. High-pressure laminate with: –Full perimeter T-mold (T), or –3mm edgeband (J) on user edge and 1mm edgeband on sides and back, or –Cascade (V) on user edge and 1mm edgeband on sides and back. Worksurfaces predrilled to accept most support options. Optional wireway along back edge of worksurface is color-matched to solid side/back edge trim. When wood grain edge trim is specified, wireway will be Charcoal. Refer to Specification Guide for wireway details. Installed worksurfaces without wireway will not allow clearance for power plug. Depths and widths shown in nominal dimensions. Available on RUSH with Standard Core.

24"

Specification Tips 24"

(Left-hand orientation) WUCE-L44

• Rear corner bracket is required and must be separately specified. • Worksurface support specific to product line; must be separately specified. • –Rear corner bracket - REQUIRED • –Cantilever bracket • –Worksurface support panel • –Worksurface support column or leg • –Side brackets • –Attached lower storage • Recommend the AKPM-23 or AKPS-5 keyboard pad for 36′′(914mm)-wide corners. Note: Separately specified worksurface reinforcement channels provide additional support for worksurfaces with 50′′(1270mm) spans that are heavily loaded and not otherwise supported by mid-span cantilevers, worksurface support panels, columns, legs or attached lower storage.

192

April 2008 / USA

Class CA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

T-Mold or Edgeband 2) Laminate surface color. 3) Edge trim color.

Cascade 1) Product number. 2) Laminate surface color. 3) Side/back edgeband trim color. 4) Front Cascade edge trim color.* *Cascade translucent edge is priced as Group II

1 Edge Options: T

T-Mold

J

Edgeband

V

Cascade

2 Core Options: S

Standard

G Green, add $94 list.

3 Wireway Options: A Notched B Curved C Without

4 Orientation (as seated): R Right-hand L

Left-hand

UniGroup Too Price List

Adaptable Worksurfaces — Laminate Left/Right Depth Width Corner, 90° Wrap-Around Extended

18′′(457mm) 36′′(914mm)

24′′(610mm) 36′′(914mm)

30′′(762mm) 36′′(914mm)

18′′(457mm) 42′′(1067mm)

24′′(610mm) 42′′(1067mm)

30′′(762mm) 42′′(1067mm)

18′′(457mm) 48′′(1219mm)

24′′(610mm) 48′′(1219mm)

30′′(762mm) 48′′(1219mm)

18′′(457mm) 54′′(1372mm)

24′′(610mm) 54′′(1372mm)

30′′(762mm) 54′′(1372mm)

18′′(457mm) 60′′(1524mm) 24′′(610mm) 60′′(1524mm) 30′′(762mm) 60′′(1524mm)

Length

Laminate Number

42′′(1067mm) WUCE-3642-L 48′′(1219mm) WUCE-3648-L 54′′(1372mm) WUCE-3654-L 60′′(1524mm) WUCE-3660-L 66′′(1676mm) WUCE-3666-L 72′′(1829mm) WUCE-3672-L 42′′(1067mm) WUCE-3642-L 48′′(1219mm) WUCE-3648-L 54′′(1372mm) WUCE-3654-L 60′′(1524mm) WUCE-3660-L 66′′(6764mm) WUCE-3666-L 72′′(1829mm) WUCE-3672-L 42′′(1067mm)(1) WUCE-3642-L 48′′(1219mm)(1) WUCE-3648-L 54′′(1372mm)(1) WUCE-3654-L 60′′(1524mm)(1) WUCE-3660-L 66′′(1676mm)(1) WUCE-3666-L 72′′(1829mm)(1) WUCE-3672-L 48′′(1219mm) WUCE-4248-L 54′′(1372mm) WUCE-4254-L 60′′(1524mm) WUCE-4260-L 66′′(1676mm) WUCE-4266-L 72′′(1829mm) WUCE-4272-L 48′′(1219mm) WUCE-4248-L 54′′(1372mm) WUCE-4254-L 60′′(1524mm) WUCE-4260-L 66′′(1676mm) WUCE-4266-L 72′′(1829mm) WUCE-4272-L 48′′(1067mm) WUCE-4248-L 54′′(1372mm) WUCE-4254-L 60′′(1524mm) WUCE-4260-L 66′′(1676mm) WUCE-4266-L 72′′(1829mm) WUCE-4272-L 54′′(1372mm) WUCE-4854-L 60′′(1524mm) WUCE-4860-L 66′′(1676mm) WUCE-4866-L 72′′(1829mm) WUCE-4872-L 54′′(1372mm) WUCE-4854-L 60′′(1524mm) WUCE-4860-L 66′′(1676mm) WUCE-4866-L 72′′(1829mm) WUCE-4872-L 54′′(1372mm) WUCE-4854-L 60′′(1524mm) WUCE-4860-L 66′′(1676mm) WUCE-4866-L 72′′(1829mm) WUCE-4872-L 60′′(1524mm) WUCE-5460-L 66′′(1676mm) WUCE-5466-L 72′′(1829mm) WUCE-5472-L 60′′(1524mm) WUCE-5460-L 66′′(1676mm) WUCE-5466-L 72′′(1829mm) WUCE-5472-L 60′′(1524mm) WUCE-5460-L 66′′(1676mm) WUCE-5466-L 72′′(1829mm) WUCE-5472-L 66′′(1676mm) WUCE-6066-L 72′′(1829mm) WUCE-6072-L 66′′(1676mm) WUCE-6066-L 72′′(1829mm) WUCE-6072-L 66′′(1676mm) WUCE-6066-L 72′′(1829mm) WUCE-6072-L

(V) (V) (T) (J) Cascade Cascade T-Mold Edgeband Group I Group II

1 2 3 4 33 33 33 33 33 33 44 44 44 44 44 44 55 55 55 55 55 55 33 33 33 33 33 44 44 44 44 44 55 55 55 55 55 33 33 33 33 44 44 44 44 55 55 55 55 33 33 33 44 44 44 55 55 55 33 33 44 44 55 55

$596 602 608 614 678 743 $618 624 630 636 700 765 $750 756 762 768 832 897 $609 616 623 689 758 $631 638 645 711 780 $763 770 777 843 912 $627 633 701 770 $649 655 723 792 $781 787 855 924 $647 720 789 $669 742 811 $801 874 943 $737 809 $759 831 $891 963

$ 662 668 674 680 753 826 $ 684 690 696 702 775 848 $ 816 822 828 834 907 980 $ 678 685 692 766 842 $ 700 707 714 788 864 $ 832 839 846 920 996 $ 698 703 779 856 $ 720 725 801 878 $ 852 857 933 1010 $ 719 800 877 $ 741 822 899 $ 873 954 1031 $ 819 899 $ 841 921 $ 973 1053

$ 708 714 720 728 806 884 $ 730 736 742 750 828 906 N/A N/A N/A N/A N/A N/A $ 726 733 740 820 901 $ 748 755 762 842 923 $ 880 887 894 974 1055 $ 747 752 833 916 $ 769 774 855 938 $ 901 906 987 1070 $ 769 856 938 $ 791 878 960 $ 923 1010 1092 $ 876 962 $ 898 984 $1030 1116

$ 735 741 747 755 833 911 $ 757 763 769 777 855 933 N/A N/A N/A N/A N/A N/A $ 753 760 767 847 928 $ 775 782 789 869 950 $ 907 914 921 1001 1082 $ 774 779 860 943 $ 796 801 882 965 $ 928 933 1014 1097 $ 796 883 965 $ 818 905 987 $ 950 1037 1119 $ 903 989 $ 925 1011 $1057 1143

(1)

Cascade edge option not available in these sizes.

Class CA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

193

UniGroup Too Price List

Adaptable Worksurfaces — Laminate

Corner, 90° Notched Extended

Features

To Order, Specify:

• • • •

1) Product number.

• • 24"

•

24"

(Right-hand orientation)

•

WUCP-R44

•

Includes worksurface and tie plate. High-pressure laminate with: –Full perimeter T-mold (T), or –3mm edgeband (J) on user edge and 1mm edgeband on sides and back, or –Cascade (V) on user edge and 1mm edgeband on sides and back. Worksurfaces predrilled to accept most support options. Optional wireways along back edges are color-matched to solid side/back edge trim. When wood grain laminate is specified, wireways will be Charcoal. Refer to Specification Guide for wireway details. Installed worksurfaces without wireway will not allow clearance for power plug. Depths and widths shown in nominal dimensions. Available on RUSH with Standard Core.

24"

Specification Tips 24"

(Left-hand orientation) WUCP-L44

• Rear corner bracket is required and must be separately specified. • Worksurface support specific to product line; must be separately specified. • –Rear corner bracket - REQUIRED • –Cantilever bracket • –Worksurface support panel • –Side brackets • Recommend the AKPM-23 or AKPS-5 keyboard pad for 36′′(914mm)-wide corners. Note: Separately specified worksurface reinforcement channels provide additional support for worksurfaces with 50′′(1270mm) spans that are heavily loaded and not otherwise supported by mid-span cantilevers, worksurface end panels, legs or attached storage.

T-Mold or Edgeband 2) Laminate surface color. 3) Edge trim color.

Cascade 1) Product number. 2) Laminate surface color. 3) Side/back edgeband trim color. 4) Front Cascade edge trim color.* *Cascade translucent edge is priced as Group II

1 Edge Options: T

T-Mold

J

Edgeband

V

Cascade

2 Core Options: S

Standard

G Green, add $94 list.

3 Wireway Options: A Notched B Curved C Without

4 Orientation (as seated): R Right-hand L

194

April 2008 / USA

Class CA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

Left-hand

UniGroup Too Price List

Adaptable Worksurfaces — Laminate Left/Right Depth Width Corner, 90° Notched Extended

18′′(457mm) 36′′(914mm)

24′′(610mm) 36′′(914mm)

30′′(762mm) 36′′(914mm)

18′′(457mm) 42′′(1067mm)

24′′(610mm) 42′′(1067mm)

30′′(762mm) 42′′(1067mm)

18′′(457mm) 48′′(1219mm)

24′′(610mm) 48′′(1219mm)

30′′(762mm) 48′′(1219mm)

18′′(457mm) 54′′(1372mm)

24′′(610mm) 54′′(1372mm)

30′′(762mm) 54′′(1372mm)

18′′(457mm) 60′′(1524mm) 24′′(610mm) 60′′(1524mm) 30′′(762mm) 60′′(1524mm)

Length

Laminate Number

42′′(1067mm) WUCP-3642-L 48′′(1219mm) WUCP-3648-L 54′′(1372mm) WUCP-3654-L 60′′(1524mm) WUCP-3660-L 66′′(1676mm) WUCP-3666-L 72′′(1829mm) WUCP-3672-L 42′′(1067mm) WUCP-3642-L 48′′(1219mm) WUCP-3648-L 54′′(1372mm) WUCP-3654-L 60′′(1524mm) WUCP-3660-L 66′′(1676mm) WUCP-3666-L 72′′(1829mm) WUCP-3672-L 42′′(1067mm)(1) WUCP-3642-L 48′′(1219mm)(1) WUCP-3648-L 54′′(1372mm)(1) WUCP-3654-L 60′′(1524mm)(1) WUCP-3660-L 66′′(1676mm)(1) WUCP-3666-L 72′′(1829mm)(1) WUCP-3672-L 48′′(1219mm) WUCP-4248-L 54′′(1372mm) WUCP-4254-L 60′′(1524mm) WUCP-4260-L 66′′(1676mm) WUCP-4266-L 72′′(1829mm) WUCP-4272-L 48′′(1219mm) WUCP-4248-L 54′′(1372mm) WUCP-4254-L 60′′(1524mm) WUCP-4260-L 66′′(1676mm) WUCP-4266-L 72′′(1829mm) WUCP-4272-L 48′′(1219mm) WUCP-4248-L 54′′(1372mm) WUCP-4254-L 60′′(1524mm) WUCP-4260-L 66′′(1676mm) WUCP-4266-L 72′′(1829mm) WUCP-4272-L 54′′(1372mm) WUCP-4854-L 60′′(1524mm) WUCP-4860-L 66′′(1676mm) WUCP-4866-L 72′′(1829mm) WUCP-4872-L 54′′(1372mm) WUCP-4854-L 60′′(1524mm) WUCP-4860-L 66′′(1676mm) WUCP-4866-L 72′′(1829mm) WUCP-4872-L 54′′(1372mm) WUCP-4854-L 60′′(1524mm) WUCP-4860-L 66′′(1676mm) WUCP-4866-L 72′′(1829mm) WUCP-4872-L 60′′(1524mm) WUCP-5460-L 66′′(1676mm) WUCP-5466-L 72′′(1829mm) WUCP-5472-L 60′′(1524mm) WUCP-5460-L 66′′(1676mm) WUCP-5466-L 72′′(1829mm) WUCP-5472-L 60′′(1524mm) WUCP-5460-L 66′′(1676mm) WUCP-5466-L 72′′(1829mm) WUCP-5472-L 66′′(1676mm) WUCP-6066-L 72′′(1829mm) WUCP-6072-L 66′′(1676mm) WUCP-6066-L 72′′(1829mm) WUCP-6072-L 66′′(1676mm) WUCP-6066-L 72′′(1829mm) WUCP-6072-L

(V) (V) (T) (J) Cascade Cascade T-Mold Edgeband Group I Group II

1 2 3 4 33 33 33 33 33 33 44 44 44 44 44 44 55 55 55 55 55 55 33 33 33 33 33 44 44 44 44 44 55 55 55 55 55 33 33 33 33 44 44 44 44 55 55 55 55 33 33 33 44 44 44 55 55 55 33 33 44 44 55 55

$606 610 616 622 687 754 $628 632 638 644 709 776 $648 652 658 664 729 796 $620 627 632 699 768 $642 649 654 721 790 $662 669 674 741 810 $638 642 711 782 $660 664 733 804 $680 684 753 824 $657 730 801 $679 752 823 $699 772 843 $747 821 $769 843 $789 863

$672 678 684 691 764 838 $694 700 706 713 786 860 $714 720 726 733 806 880 $689 696 702 777 854 $711 718 724 799 876 $731 738 744 819 896 $708 713 791 869 $730 735 813 891 $750 755 833 911 $730 812 890 $752 834 912 $772 854 932 $831 912 $853 934 $873 954

$ 719 726 732 739 817 897 $ 741 748 754 761 839 919 N/A N/A N/A N/A N/A N/A $ 737 745 751 831 914 $ 759 767 773 853 936 $ 779 787 793 873 956 $ 758 763 846 930 $ 780 785 868 952 $ 800 805 888 972 $ 781 869 952 $ 803 891 974 $ 823 911 994 $ 889 976 $ 911 998 $ 931 1018

$ 746 753 759 766 844 924 $ 768 775 781 788 866 946 N/A N/A N/A N/A N/A N/A $ 764 772 778 858 941 $ 786 794 800 880 963 $ 806 814 820 900 983 $ 785 790 873 957 $ 807 812 895 979 $ 827 832 915 999 $ 808 896 979 $ 830 918 1001 $ 850 938 1021 $ 916 1003 $ 938 1025 $ 958 1045

(1)

Cascade edge option not available in these sizes.

Class CA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

195

UniGroup Too Price List

Adaptable Worksurfaces — Laminate

Corner, 90° Wrap-Around Transitional Extended

Features

To Order, Specify:

• • • •

1) Product number.

•

Length

• Width

24"

•

18"

(Right-hand orientation) WUCX-R34

•

Length

•

Includes worksurface and tie plate. High-pressure laminate with: –Full perimeter T-mold (T), or –3mm edgeband (J) on user edge and 1mm edgeband on sides and back, or –Cascade (V) on user edge and 1mm edgeband on sides and back. Worksurfaces predrilled to accept most support options. Optional wireway along back edges of worksurface is color-matched to solid side/back edge trim. When wood grain edge trim laminate is specified, wireway will be Charcoal. Refer to Specification Guide for wireway details. Installed worksurfaces without wireway will not allow clearance for power plug. Depths and widths shown in nominal dimensions. Available on RUSH with Standard Core.

Width

24"

18"

(Left-hand orientation) WUCX-L43

Specification Tips • Rear corner bracket is required and must be separately specified. • Worksurface support specific to product line; must be separately specified. • –Rear corner bracket - REQUIRED • –Cantilever bracket • –Worksurface support panel • –Worksurface support column or leg • –Side brackets • –Attached lower storage • Recommend the AKPM-23 or AKPS-5 keyboard pad for 36′′(914mm)-wide corners. • Intermediate support is required for unsupported worksurface span greater than 60′′(1524mm). Note: Separately specified worksurface reinforcement channels provide additional support for worksurfaces with 50′′(1270mm) spans that are heavily loaded and not otherwise supported by mid-span cantilevers, worksurface support panels, columns, legs or attached lower storage.

196

April 2008 / USA

Class CA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

T-Mold or Edgeband 2) Laminate surface color. 3) Edge trim color.

Cascade 1) Product number. 2) Laminate surface color. 3) Side/back edgeband trim color. 4) Front Cascade edge trim color.* *Cascade translucent edge is priced as Group II

1 Edge Options: T

T-Mold

J

Edgeband

V

Cascade

2 Core Options: S

Standard

G Green, add $94 list.

3 Wireway Options: A Notched B Curved C Without

4 Orientation (as seated): R Right-hand L

Left-hand

UniGroup Too Price List

Adaptable Worksurfaces — Laminate Left/Right Depth Width Corner, 90° Wrap-Around Transitional Extended

18′′(457mm)/ 36′′(914mm) 24′′(66mm)

Length

Laminate Number

(V) (V) (T) (J) Cascade Cascade T-Mold Edgeband Group I Group II

1 2 3 4

42′′(1067mm) WUCX-3642-L

34

$569

$643

$ 700

$ 727

48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 66′′(1676mm) 72′′(1829mm) 42′′(1067mm)

WUCX-3648-L WUCX-3654-L WUCX-3660-L WUCX-3666-L WUCX-3672-L WUCX-3642-L

34 34 34 34 34 43

588 649 711 786 859 $569

662 723 785 860 933 $643

719 780 842 917 990 $ 700

746 807 869 944 1017 $ 727

48′′(1219mm) WUCX-3648-L 54′′(1372mm) WUCX-3654-L 60′′(1524mm) WUCX-3660-L 66′′(6764mm) WUCX-3666-L 72′′(1829mm) WUCX-3672-L 42′′(1067mm)(1) WUCX-3642-L

43 43 43 43 43 45

588 649 711 786 859 $579

662 723 785 860 933 $653

719 780 842 917 990 N/A

746 807 869 944 1017 N/A

48′′(1219mm)(1) WUCX-3648-L 54′′(1372mm)(1) WUCX-3654-L 60′′(1524mm)(1) WUCX-3660-L 66′′(6764mm)(1) WUCX-3666-L 72′′(1829mm)(1) WUCX-3672-L 42′′(1067mm)(1) WUCX-3642-L

45 45 45 45 45 54

598 659 721 796 869 $579

672 733 795 870 943 $653

N/A N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A N/A

48′′(1219mm)(1) WUCX-3648-L 54′′(1372mm)(1) WUCX-3654-L 60′′(1524mm)(1) WUCX-3660-L 66′′(1676mm)(1) WUCX-3666-L 72′′(1829mm)(1) WUCX-3672-L 18′′(457mm)/ 42′′(1067mm) 48′′(1219mm) WUCX-4248-L 24′′(610mm) 54′′(1372mm) WUCX-4254-L 60′′(1524mm) WUCX-4260-L 66′′(1676mm) WUCX-4266-L 72′′(1829mm) WUCX-4272-L 24′′(610mm)/ 42′′(1067mm) 48′′(1219mm) WUCX-4248-L 18′′(457mm) 54′′(1372mm) WUCX-4254-L 60′′(1524mm) WUCX-4260-L 66′′(1676mm) WUCX-4266-L 72′′(1829mm) WUCX-4272-L 24′′(610mm)/ 42′′(1067mm) 48′′(1219mm) WUCX-4248-L 30′′(762mm) 54′′(1372mm) WUCX-4254-L 60′′(1524mm) WUCX-4260-L 66′′(1676mm) WUCX-4266-L 72′′(1829mm) WUCX-4272-L 30′′(762mm)/ 42′′(1067mm) 48′′(1067mm) WUCX-4248-L 24′′(610mm) 54′′(1372mm) WUCX-4254-L 60′′(1524mm) WUCX-4260-L 66′′(1676mm) WUCX-4266-L 72′′(1829mm) WUCX-4272-L 18′′(457mm)/ 48′′(1219mm) 54′′(1372mm) WUCX-4854-L 24′′(610mm) 60′′(1524mm) WUCX-4860-L 66′′(1676mm) WUCX-4866-L 72′′(1829mm) WUCX-4872-L 24′′(610mm)/ 48′′(1219mm) 54′′(1372mm) WUCX-4854-L 18′′(457mm) 60′′(1524mm) WUCX-4860-L 66′′(1676mm) WUCX-4866-L 72′′(1829mm) WUCX-4872-L 24′′(610mm)/ 48′′(1219mm) 54′′(1372mm) WUCX-4854-L 30′′(762mm) 60′′(1524mm) WUCX-4860-L 66′′(1676mm) WUCX-4866-L 72′′(1829mm) WUCX-4872-L

54 54 54 54 54 34

598 659 721 796 869 $628

672 733 795 870 943 $708

N/A N/A N/A N/A N/A $ 769

N/A N/A N/A N/A N/A $ 796

34 34 34 34 43

649 711 788 832 $628

729 791 868 925 $708

790 852 929 996 $ 769

817 879 956 1023 $ 796

43 43 43 43 45

649 711 788 832 $647

729 791 868 925 $727

790 852 929 996 $ 788

817 879 956 1023 $ 815

45 45 45 45 54

668 730 807 851 $647

748 810 887 944 $727

809 871 948 1015 $ 788

836 898 975 1042 $ 815

54 54 54 54 34

668 730 807 851 $659

748 810 887 944 $746

809 871 948 1015 $ 809

836 898 975 1042 $ 836

34 34 34 43

722 798 860 $659

809 885 962 $746

872 948 1023 $ 809

899 975 1050 $ 836

43 43 43 45

722 798 860 $678

809 885 962 $765

872 948 1023 $ 828

899 975 1050 $ 855

45 45 45

741 817 879

828 904 981

891 967 1042

918 994 1069

24′′(610mm)/ 36′′(914mm) 18′′(457mm)

24′′(610mm)/ 36′′(914mm) 30′′(762mm)

30′′(762mm)/ 36′′(914mm) 24′′(610mm)

(1)

Cascade edge option not available in these sizes.

Class CA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

197

UniGroup Too Price List

Adaptable Worksurfaces — Laminate Left/Right Depth Width Corner, 90° Wrap-Around Transitional Extended

198

April 2008 / USA

Length

30′′(762mm)/ 48′′(1219mm) 54′′(1372mm) 24′′(610mm) 60′′(1524mm) 66′′(1676mm) 72′′(1829mm) 18′′(457mm)/ 54′′(1372mm) 60′′(1524mm) 24′′(610mm) 66′′(1676mm) 72′′(1829mm) 24′′(610mm)/ 54′′(1372mm) 60′′(1524mm) 18′′(457mm) 66′′(1676mm) 72′′(1829mm) 24′′(610mm)/ 54′′(1372mm) 60′′(1524mm) 30′′(762mm) 66′′(1676mm) 72′′(1829mm) 30′′(762mm)/ 54′′(1372mm) 60′′(1524mm) 24′′(610mm) 66′′(1676mm) 72′′(1829mm) 18′′(457mm)/ 60′′(1524mm) 66′′(1676mm) 24′′(610mm) 72′′(1829mm) 24′′(610mm)/ 60′′(1524mm) 66′′(1676mm) 18′′(457mm) 72′′(1829mm) 24′′(610mm)/ 60′′(1524mm) 66′′(1676mm) 30′′(762mm) 72′′(1829mm) 30′′(762mm)/ 60′′(1524mm) 66′′(1676mm) 24′′(610mm) 72′′(1829mm)

Laminate Number

(V) (V) (T) (J) Cascade Cascade T-Mold Edgeband Group I Group II

1 2 3 4

WUCX-4854-L

54

$678

$ 765

$ 828

$ 855

WUCX-4860-L WUCX-4866-L WUCX-4872-L WUCX-5460-L

54 54 54 34

741 817 879 $737

828 904 981 $ 831

891 967 1042 $ 896

918 994 1069 $ 923

WUCX-5466-L WUCX-5472-L WUCX-5460-L

34 34 43

817 894 $737

911 988 $ 831

976 1053 $ 896

1003 1080 $ 923

WUCX-5466-L WUCX-5472-L WUCX-5460-L

43 43 45

817 894 $756

911 988 $ 850

976 1053 $ 915

1003 1080 $ 942

WUCX-5466-L WUCX-5472-L WUCX-5460-L

45 45 54

836 913 $756

930 1007 $ 850

995 1072 $ 915

1022 1099 $ 942

WUCX-5466-L WUCX-5472-L WUCX-6066-L

54 54 34

836 913 $834

930 1007 $ 935

995 1072 $1003

1022 1099 $1030

WUCX-6072-L WUCX-6066-L

34 43

915 $834

1016 $ 935

1084 $1003

1111 $1030

WUCX-6072-L WUCX-6066-L

43 45

915 $853

1016 $ 954

1084 $1022

1111 $1049

WUCX-6072-L WUCX-6066-L

45 54

934 $853

1035 $ 954

1103 $1022

1130 $1049

WUCX-6072-L

54

934

1035

1103

1130

Class CA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

UniGroup Too Price List

Adaptable Worksurfaces — Laminate Left/Right Depth 90° Merger

18′′(457mm)

24′′(610mm)

24"

30′′(762mm)

24"

WUCQ-N44

Width

Laminate Number

36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm)

WUCQ-3636-L WUCQ-4242-L WUCQ-4848-L WUCQ-5454-L WUCQ-3636-L WUCQ-4242-L WUCQ-4848-L WUCQ-5454-L WUCQ-3636-L WUCQ-4242-L WUCQ-4848-L WUCQ-5454-L

1 2 3 N33 N33 N33 N33 N44 N44 N44 N44 N55 N55 N55 N55

(T) T-Mold

(J) Edgeband

$359 400 480 563 $373 414 494 577 $445 486 566 649

$399 445 533 625 $413 459 547 639 $485 531 619 711

Features

To Order, Specify:

• • • •

1) Product number.

• •

• •

Includes worksurface. High-pressure laminate with: –Full perimeter T-mold (T), or –3mm edgeband (J) on user edge and 1mm edgeband on sides and back. Worksurfaces predrilled to accept most support options. Optional wireways along back edges are color-matched to solid side/back edge trim. When wood grain laminate is specified, wireways will be Charcoal. Refer to Specification Guide for wireway details. Installed worksurfaces without wireway will not allow clearance for power plug. Depths and widths shown in nominal dimensions. Available on RUSH with Standard Core.

Specification Tips • 90° Merger is suggested alternative to using two perpendicular rectangular worksurfaces. • Rear corner bracket is required and must be separately specified. • Worksurface support specific to product line; must be separately specified. • –Rear corner bracket - REQUIRED • –Cantilever bracket • –Worksurface support panel • –Side brackets • Not designed for use with an adjustable keyboard pad. • Due to manufacturing restrictions, not available with Cascade edge.

Class CA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

T-Mold or Edgeband 2) Laminate surface color. 3) Edge trim color.

1 Edge Options: T

T-Mold

J

Edgeband

2 Core Options: S

Standard

G Green, add $94 list.

3 Wireway Options: A Notched B Curved C Without

April 2008 / USA

199

UniGroup Too Price List

Adaptable Worksurfaces — Laminate Left/Right Depth Corner, 120° Wrap-Around

18′′(457mm)

24′′(610mm)

24"

24"

30′′(762mm)

WUCZ-N44

Width

Laminate Number

36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm)

WUCZ-3636-L WUCZ-4242-L WUCZ-4848-L WUCZ-5454-L WUCZ-6060-L WUCZ-3636-L WUCZ-4242-L WUCZ-4848-L WUCZ-5454-L WUCZ-6060-L WUCZ-3636-L WUCZ-4242-L WUCZ-4848-L WUCZ-5454-L WUCZ-6060-L

1 2 3 N33 N33 N33 N33 N33 N44 N44 N44 N44 N44 N55 N55 N55 N55 N55

(T) T-Mold

(J) Edgeband

(V) Cascade Group I

(V) Cascade Group II

$487 535 630 674 740 $507 565 664 712 780 $605 665 780 838 920

$ 546 600 707 756 830 $ 566 630 741 794 870 $ 664 730 857 920 1010

$ 588 645 761 813 893 $ 608 675 795 851 933 $ 706 775 911 977 1073

$ 615 672 788 840 920 $ 635 702 822 878 960 $ 733 802 938 1004 1100

Features

To Order, Specify:

• • • •

1) Product number.

• • •

• •

Includes worksurface and tie plate. High-pressure laminate with: –Full perimeter T-mold (T), or –3mm edgeband (J) on user edge and 1mm edgeband on sides and back, or –Cascade (V) on user edge and 1mm edgeband on sides and back. Worksurfaces predrilled to accept most support options. Optional wireway along back edges of worksurface is color-matched to solid side/back edge trim. When wood grain edge trim is specified, wireway will be Charcoal. Refer to Specification Guide for wireway details. Installed worksurfaces without wireway will not allow clearance for power plug. Depths and widths shown in nominal dimensions. Available on RUSH with Standard Core.

April 2008 / USA

2) Laminate surface color. 3) Edge trim color.

Cascade 1) Product number. 2) Laminate surface color. 3) Side/back edgeband trim color. 4) Front Cascade edge trim color.* *Cascade translucent edge is priced as Group II

1 Edge Options:

Specification Tips

T

T-Mold

• Rear corner bracket is required and must be separately specified. • Worksurface support specific to product line; must be separately specified. • –Rear corner bracket - REQUIRED • –Cantilever bracket • –Worksurface support panel • –Side brackets • Recommend the AKPM-23 or AKPS-5 keyboard pad for 36′′(914mm)-wide corners.

J

Edgeband

V

Cascade

Note: Separately specified worksurface reinforcement channels provide additional support for worksurfaces with 50′′(1270mm) spans that are heavily loaded and not otherwise supported by mid-span cantilevers, worksurface support panels, columns, legs or attached lower storage.

200

T-Mold or Edgeband

Class CA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

2 Core Options: S

Standard

G Green, add $94 list.

3 Wireway Options: A Notched B Curved C Without

UniGroup Too Price List

Adaptable Worksurfaces — Laminate

D-Shaped Convergent

Width

Length

Laminate Number

24′′(610mm)

36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 66′′(1676mm) 72′′(1829mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 66′′(1676mm) 72′′(1829mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 66′′(1676mm) 72′′(1829mm)

WURD-2436-L WURD-2442-L WURD-2448-L WURD-2454-L WURD-2460-L WURD-2466-L WURD-2472-L WURD-3036-L WURD-3042-L WURD-3048-L WURD-3054-L WURD-3060-L WURD-3066-L WURD-3072-L WURD-3636-L WURD-3642-L WURD-3648-L WURD-3654-L WURD-3660-L WURD-3666-L WURD-3672-L

30′′(762mm)

36′′(914mm)

WURD

1 2 3

(T) T-Mold

(J) Edgeband

(V) Cascade Group I

(V) Cascade Group II

$199 225 257 292 327 367 406 $206 233 265 302 337 378 418 $213 240 273 311 348 389 431

$222 251 286 325 364 408 451 $230 259 295 336 375 420 465 $237 267 304 346 387 432 479

$238 269 307 348 390 437 483 $247 278 316 360 402 450 498 $254 286 326 371 415 463 513

$265 296 334 375 417 464 510 $274 305 343 387 429 477 525 $281 313 353 398 442 490 540

Features

To Order, Specify:

• • • •

1) Product number.

• • •

• • •

Includes worksurface and tie plate. High-pressure laminate with: –Full perimeter T-mold (T), or –3mm edgeband (J) on user edge and 1mm edgeband on back (width), or –Cascade (V) on user edge and 1mm edgeband on back (width). Worksurfaces predrilled to accept most support options. Optional wireway is centered on back edge and is color-matched to solid side/back edge trim. When wood grain edge trim is specified, wireway will be Charcoal. Refer to Specification Guide for wireway details. Installed worksurfaces without wireway will not allow clearance for power plug. Must be attached to a panel or face of a straight worksurface. Depths and widths shown in nominal dimensions. Available on RUSH with Standard Core.

Specification Tips • Worksurface support specific to product line; must be separately specified. • –Column support or leg • –Straight leg basic • –Attached lower storage • In addition to the required floor support, separately specify the appropriate support options. Select one or more of the following: • –Cantilever bracket • –Worksurface support panel • –Convergent mount bracket • –Flush mount plates • –Side bracket • For aesthetic reasons, when using Cascade edge or edgeband edge option, consider specifying D-Shaped Convergent Wrap-Around.

T-Mold or Edgeband 2) Laminate surface color. 3) Edge trim color.

Cascade 1) Product number. 2) Laminate surface color. 3) Side/back edgeband trim color. 4) Front Cascade edge trim color.* *Cascade translucent edge is priced as Group II

1 Edge Options: T

T-Mold

J

Edgeband

V

Cascade

2 Core Options: S

Standard

G Green, add $94 list.

3 Wireway Options: A Notched B Curved C Without

Note: Separately specified worksurface reinforcement channels provide additional support for worksurfaces with 50′′(1270mm) spans that are heavily loaded and not otherwise supported by mid-span cantilevers, worksurface support panels, columns, legs or attached lower storage.

Class CA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

201

UniGroup Too Price List

Adaptable Worksurfaces — Laminate

Rectangular Convergent

Width

Length

Laminate Number

24′′(610mm)

36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 66′′(1676mm) 72′′(1829mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 66′′(1676mm) 72′′(1829mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 66′′(1676mm) 72′′(1829mm)

WURV-2436-L WURV-2442-L WURV-2448-L WURV-2454-L WURV-2460-L WURV-2466-L WURV-2472-L WURV-3036-L WURV-3042-L WURV-3048-L WURV-3054-L WURV-3060-L WURV-3066-L WURV-3072-L WURV-3636-L WURV-3642-L WURV-3648-L WURV-3654-L WURV-3660-L WURV-3666-L WURV-3672-L

30′′(762mm)

36′′(914mm)

WURV

1 2 3

(T) T-Mold

(J) Edgeband

(V) Cascade Group I

(V) Cascade Group II

$199 225 257 292 327 367 406 $206 233 265 302 337 378 418 $213 240 273 311 348 389 431

$222 251 286 325 364 408 451 $230 259 295 336 375 420 465 $237 267 304 346 387 432 479

$238 269 307 348 390 437 483 $247 278 316 360 402 450 498 $254 286 326 371 415 463 513

$265 296 334 375 417 464 510 $274 305 343 387 429 477 525 $281 313 353 398 442 490 540

Features

To Order, Specify:

• • • •

1) Product number.

• • •

• • •

Includes worksurface and tie plate. High-pressure laminate with: –Full perimeter T-mold (T), or –3mm edgeband (J) on user edges and 1mm edgeband on front and back (width), or –Cascade (V) on user edges and 1mm edgeband on front and back (width). Worksurfaces predrilled to accept most support options. Optional wireway along back edge of worksurface is color-matched to solid side/back edge trim. When wood grain edge trim is specified, wireway will be Charcoal. Refer to Specification Guide for wireway details. Installed worksurfaces without wireway will not allow clearance for power plug. Must be attached to a panel or face of a straight worksurface. Depths and widths shown in nominal dimensions. Available on RUSH with Standard Core.

Specification Tips • Worksurface support specific to product line; must be separately specified. • –Column support or leg • –Straight leg basic • –Attached lower storage • In addition to the required floor support, separately specify the appropriate support options. Select one or more of the following: • –Cantilever bracket • –Worksurface support panel • –Convergent mount bracket • –Flush mount plates • For aesthetic reasons, when using Cascade edge or edgeband edge option, consider specifying D-Shaped Convergent Wrap-Around. Note: Separately specified worksurface reinforcement channels provide additional support for worksurfaces with 50′′(1270mm) spans that are heavily loaded and not otherwise supported by mid-span cantilevers, worksurface support panels, columns, legs or attached lower storage.

202

April 2008 / USA

Class CA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

T-Mold or Edgeband 2) Laminate surface color. 3) Edge trim color.

Cascade 1) Product number. 2) Laminate surface color. 3) Side/back edgeband trim color. 4) Front Cascade edge trim color.* *Cascade translucent edge is priced as Group II

1 Edge Options: T

T-Mold

J

Edgeband

V

Cascade

2 Core Options: S

Standard

G Green, add $94 list.

3 Wireway Options: A Notched B Curved C Without

UniGroup Too Price List

This page intentionally blank

April 2008 / USA

203

UniGroup Too Price List

Adaptable Worksurfaces — Laminate

D-Shaped Convergent, Wrap-Around

Features

To Order, Specify:

• • • •

1) Product number.

• • •

• • • (Right-hand orientation)

•

Includes worksurface and tie plate. High-pressure laminate with: –Full perimeter T-mold (T), or –3mm edgeband (J) on user edge and 1mm edgeband on side and back, or –Cascade (V) on user edge and 1mm edgeband on side and back. Worksurfaces predrilled to accept most support options. Optional wireway is centered on back edge and is color-matched to solid side/back edge trim. When wood grain or patterned laminate is specified, wireway will be Charcoal. Refer to Specification Guide for wireway details. Installed worksurfaces without wireway will not allow clearance for power plug. 36′′(914mm)-wide surfaces have a 24′′(610mm) D-shaped diameter. 42′′(1067mm)- to 60′′(1524mm)-wide surfaces have a 30′′(762mm) D-shaped diameter. Depths and widths shown in nominal dimensions.

T-Mold or Edgeband 2) Laminate surface color. 3) Edge trim color.

Cascade 1) Product number. 2) Laminate surface color. 3) Side/back edgeband trim color. 4) Front Cascade edge trim color.* *Cascade translucent edge is priced as Group II

1 Edge Options: T

T-Mold

J

Edgeband

V

Cascade

Available on RUSH with Standard Core.

Specification Tips

(Left-hand orientation) WUCD

• Worksurface support specific to product line; must be separately specified. • –Worksurface column support or leg • –Attached lower storage • In addition to the required floor support, separately specify the appropriate support options. Select one or more of the following: • –Cantilever bracket • –Worksurface support panel • –Convergent mount bracket Note: Separately specified worksurface reinforcement channels provide additional support for worksurfaces with 50′′(1270mm) spans that are heavily loaded and not otherwise supported by mid-span cantilevers, worksurface support panels, columns, legs or attached lower storage.

204

April 2008 / USA

Class CA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

2 Core Options: S

Standard

G Green, add $94 list.

3 Wireway Options: A Notched B Curved C Without

4 Orientation (as seated): R Right-hand L

Left-hand

UniGroup Too Price List

Adaptable Worksurfaces — Laminate Depth D-Shaped Convergent, Wrap-Around

Width

18′′(457mm) 36′′(914mm)

24′′(610mm) 36′′(914mm)

30′′(762mm) 36′′(914mm)

18′′(457mm) 42′′(1067mm)

24′′(610mm) 42′′(1067mm)

30′′(762mm) 42′′(1067mm)

18′′(457mm) 48′′(1219mm)

24′′(610mm) 48′′(1219mm)

30′′(762mm) 48′′(1219mm)

18′′(457mm) 54′′(1372mm)

24′′(610mm) 54′′(1372mm)

30′′(762mm) 54′′(1372mm)

18′′(457mm) 60′′(1524mm)

24′′(610mm) 60′′(1524mm)

30′′(762mm) 60′′(1524mm)

Length

Laminate Number

60′′(1524mm) 66′′(1676mm) 72′′(1829mm) 60′′(1524mm) 66′′(1676mm) 72′′(1829mm) 60′′(1524mm) 66′′(1676mm) 72′′(1829mm) 60′′(1524mm) 66′′(1676mm) 72′′(1829mm) 60′′(1524mm) 66′′(1676mm) 72′′(1829mm) 60′′(1524mm) 66′′(1676mm) 72′′(1829mm) 60′′(1524mm) 66′′(1676mm) 72′′(1829mm) 60′′(1524mm) 66′′(1676mm) 72′′(1829mm) 60′′(1524mm) 66′′(1676mm) 72′′(1829mm) 60′′(1524mm) 66′′(1676mm) 72′′(1829mm) 60′′(1524mm) 66′′(1676mm) 72′′(1829mm) 60′′(1524mm) 66′′(1676mm) 72′′(1829mm) 60′′(1524mm) 66′′(1676mm) 72′′(1829mm) 60′′(1524mm) 66′′(1676mm) 72′′(1829mm) 60′′(1524mm) 66′′(1676mm) 72′′(1829mm)

WUCD-3660-L WUCD-3666-L WUCD-3672-L WUCD-3660-L WUCD-3666-L WUCD-3672-L WUCD-3660-L WUCD-3666-L WUCD-3672-L WUCD-4260-L WUCD-4266-L WUCD-4272-L WUCD-4260-L WUCD-4266-L WUCD-4272-L WUCD-4260-L WUCD-4266-L WUCD-4272-L WUCD-4860-L WUCD-4866-L WUCD-4872-L WUCD-4860-L WUCD-4866-L WUCD-4872-L WUCD-4860-L WUCD-4866-L WUCD-4872-L WUCD-5460-L WUCD-5466-L WUCD-5472-L WUCD-5460-L WUCD-5466-L WUCD-5472-L WUCD-5460-L WUCD-5466-L WUCD-5472-L WUCD-6060-L WUCD-6066-L WUCD-6072-L WUCD-6060-L WUCD-6066-L WUCD-6072-L WUCD-6060-L WUCD-6066-L WUCD-6072-L

(V) (V) (T) (J) Cascade Cascade T-Mold Edgeband Group I Group II

1 2 3 4

Class CA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

3 3 3 4 4 4 5 5 5 3 3 3 4 4 4 5 5 5 3 3 3 4 4 4 5 5 5 3 3 3 4 4 4 5 5 5 3 3 3 4 4 4 5 5 5

$678 718 755 $707 747 784 $735 775 812 $694 736 775 $723 765 804 $751 793 832 $714 754 795 $743 783 824 $771 811 852 $731 774 816 $760 803 845 $788 831 873 $749 793 843 $778 822 872 $806 850 900

$753 798 839 $782 827 868 $810 855 896 $772 818 861 $801 847 890 $829 875 918 $794 838 883 $823 867 912 $851 895 940 $813 860 906 $842 889 935 $870 917 963 $833 881 937 $862 910 966 $890 938 994

$ 814 862 908 $ 843 891 937 $ 871 919 965 $ 836 886 933 $ 865 915 962 $ 893 943 990 $ 862 909 958 $ 891 938 987 $ 919 966 1015 $ 883 937 987 $ 912 966 1016 $ 940 994 1044 $ 908 962 1022 $ 937 991 1051 $ 965 1019 1079

$ 841 889 935 $ 870 918 964 $ 898 946 992 $ 863 913 960 $ 892 942 989 $ 920 970 1017 $ 889 936 985 $ 918 965 1014 $ 946 993 1042 $ 910 964 1014 $ 939 993 1043 $ 967 1021 1071 $ 935 989 1049 $ 964 1018 1078 $ 992 1046 1106

April 2008 / USA

205

UniGroup Too Price List

Adaptable Worksurfaces — Laminate

D-Shaped Ender

Depth

Length

Laminate Number

18′′(457mm)

36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 66′′(1676mm) 72′′(1829mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 66′′(1676mm) 72′′(1829mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 66′′(1676mm) 72′′(1829mm)

WUDD-1836-L WUDD-1842-L WUDD-1848-L WUDD-1854-L WUDD-1860-L WUDD-1866-L WUDD-1872-L WUDD-2436-L WUDD-2442-L WUDD-2448-L WUDD-2454-L WUDD-2460-L WUDD-2466-L WUDD-2472-L WUDD-3036-L WUDD-3042-L WUDD-3048-L WUDD-3054-L WUDD-3060-L WUDD-3066-L WUDD-3072-L

24′′(610mm)

30′′(762mm)

WUDD

1 2 C C C C C C C C C C C C C C C C C C C C C

(T) T-Mold

(J) Edgeband

(V) Cascade Group I

(V) Cascade Group II

$194 219 249 284 317 356 394 $199 225 257 292 327 367 406 $206 233 265 302 337 378 418

$216 244 277 316 353 396 438 $222 251 286 325 364 408 451 $230 259 295 336 375 420 465

$232 262 297 339 378 424 469 $238 269 307 348 390 437 483 $247 278 316 360 402 450 498

$259 289 324 366 405 451 496 $265 296 334 375 417 464 510 $274 305 343 387 429 477 525

Features

To Order, Specify:

• • • •

1) Product number.

• • • •

Includes worksurface and tie plate. High-pressure laminate with: –Full perimeter T-mold (T), or –3mm edgeband (J) on user edge and 1mm edgeband on back (width), or –Cascade (V) on user edge and 1mm edgeband on back (width). Worksurfaces predrilled to accept most support options. Must be attached to the depth of adjoining worksurface. Depths and widths shown in nominal dimensions. Available on RUSH with Standard Core.

Specification Tips • Worksurface support specific to product line; must be separately specified. • –Worksurface column support or leg • –Attached lower storage • In addition to the required floor support, separately specify the appropriate support options. Select one or more of the following: • –Standard link cantilever bracket • –Worksurface support panel • –Convergent mount bracket • –Flush mount plate • For aesthetic reasons, when using Cascade edge option, consider specifying D-Shaped Convergent Wrap-Around. Note: Separately specified worksurface reinforcement channels provide additional support for worksurfaces with 50′′(1270mm) spans that are heavily loaded and not otherwise supported by mid-span cantilevers, worksurface support panels, columns, legs or attached lower storage.

206

April 2008 / USA

Class CA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

T-Mold or Edgeband 2) Laminate surface color. 3) Edge trim color.

Cascade 1) Product number. 2) Laminate surface color. 3) Side/back edgeband trim color. 4) Front Cascade edge trim color.* *Cascade translucent edge is priced as Group II

1 Edge Options: T

T-Mold

J

Edgeband

V

Cascade

2 Core Options: S

Standard

G Green, add $94 list.

UniGroup Too Price List

Adaptable Worksurfaces — Laminate Transitional Left/Right Depth Width Bent

Length Width

24" 30"

(Right-hand orientation) WUCB-R45 Length Width

24" 30"

(Left-hand orientation) WUCB-L54

Length

24′′(610mm)/ 24′′(610mm) 36′′(914mm) 30′′(762mm) 42′′(1067mm) 48′′(1219mm) 60′′(1524mm) 24′′(610mm)/ 30′′(762mm) 36′′(914mm) 30′′(762mm) 42′′(1067mm) 48′′(1219mm) 60′′(1524mm) 30′′(762mm)/ 24′′(610mm) 36′′(914mm) 24′′(610mm) 42′′(1067mm) 48′′(1219mm) 60′′(1524mm) 30′′(762mm)/ 30′′(762mm) 36′′(914mm) 24′′(610mm) 42′′(1067mm) 48′′(1219mm) 60′′(1524mm)

Laminate Number

(V) (V) (T) (J) Cascade Cascade T-Mold Edgeband Group I Group II

1 2 3

WUCB-2436-L

R45

$506

$563

$602

$ 629

WUCB-2442-L WUCB-2448-L WUCB-2460-L WUCB-3036-L

R45 R45 R45 R45

556 656 770 $598

618 728 856 $664

661 779 916 $710

688 806 943 $ 737

WUCB-3042-L WUCB-3048-L WUCB-3060-L WUCB-2436-L

R45 R45 R45 L54

657 772 827 $506

729 858 919 $563

780 918 983 $602

807 945 1010 $ 629

WUCB-2442-L WUCB-2448-L WUCB-2460-L WUCB-3036-L

L54 L54 L54 L54

556 656 770 $598

618 728 856 $664

661 779 916 $710

688 806 943 $ 737

WUCB-3042-L WUCB-3048-L WUCB-3060-L

L54 L54 L54

657 772 827

729 858 919

780 918 983

807 945 1010

Features

To Order, Specify:

• • • •

1) Product number.

• • •

• •

Includes worksurface and tie plate. High-pressure laminate with: –Full perimeter T-mold (T), or –3mm edgeband (J) on user edge and 1mm edgeband on back (width), or –Cascade (V) on user edge and 1mm edgeband on back (width). Worksurfaces predrilled to accept most support options. Optional wireway along back edge is color-matched to solid side/back edge trim. When wood grain laminate is specified, wireways will be Charcoal. Refer to Specification Guide for wireway details. Installed worksurfaces without wireway will not allow clearance for power plug. Depths and widths shown in nominal dimensions. Available on RUSH with Standard Core.

T-Mold or Edgeband 2) Laminate surface color. 3) Edge trim color.

Cascade 1) Product number. 2) Laminate surface color. 3) Side/back edgeband trim color. 4) Front Cascade edge trim color.* *Cascade translucent edge is priced as Group II

1 Edge Options:

Specification Tips

T

T-Mold

• Worksurface support specific to product line; must be separately specified. • –Convergent mount bracket - REQUIRED • –Cantilever bracket • –Worksurface support column or leg • –Flush mount plate

J

Edgeband

V

Cascade

Note: Separately specified worksurface reinforcement channels provide additional support for worksurfaces with 50′′(1270mm) spans that are heavily loaded and not otherwise supported by mid-span cantilevers, worksurface end panels, legs or attached storage.

2 Core Options: S

Standard

G Green, add $94 list.

3 Wireway Options: A Notched B Curved C Without

Class CA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

207

UniGroup Too Price List

Adaptable Worksurfaces — Laminate

Countertop

Depth

Width

Laminate Number

12′′(305mm)

24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 66′′(1676mm) 72′′(1829mm) 78′′(1981mm) 84′′(2134mm) 90′′(2286mm) 96′′(2438mm) 102′′(2591mm) 108′′(2743mm) 114′′(2896mm) 120′′(3048mm)

WUTS-1224-L WUTS-1230-L WUTS-1236-L WUTS-1242-L WUTS-1248-L WUTS-1254-L WUTS-1260-L WUTS-1266-L WUTS-1272-L WUTS-1278-L WUTS-1284-L WUTS-1290-L WUTS-1296-L WUTS-12A2-L WUTS-12A8-L WUTS-12B4-L WUTS-12C0-L

WUTS

1 2 C C C C C C C C C C C C C C C C C

(T) T-Mold

(J) Edgeband

(V) Cascade Group I

(V) Cascade Group II

$236 252 271 286 303 311 317 330 340 359 375 390 406 419 432 443 453

$263 281 301 318 337 346 353 367 378 397 415 432 450 464 478 490 501

$282 301 323 341 361 371 378 393 405 425 444 462 481 496 511 524 536

$309 328 350 368 388 398 405 420 432 452 471 489 508 523 538 551 563

Features

To Order, Specify:

• • • •

1) Product number.

Includes countertop and tie plate. High-pressure laminate with: –Full perimeter T-mold (T), or –3mm edgeband (J) on user edge and 1mm edgeband on ends, or • –Cascade (V) on user edges and 1mm edgeband on ends. • Depths and widths shown in nominal dimensions. Available on RUSH with Standard Core.

T-Mold or Edgeband 2) Laminate surface color. 3) Edge trim color.

Cascade 1) Product number.

Specification Tips

2) Laminate surface color.

• Requires separately specified mounting hardware. • For installation on panels 42′′(1067mm)-high or higher. • For use in applications that match panel width or multiple panel widths.

3) Side/back edgeband trim color. 4) Front Cascade edge trim color.* *Cascade translucent edge is priced as Group II

1 Edge Options: T

T-Mold

J

Edgeband

V

Cascade

2 Core Options: S

Standard

G Green, add $94 list.

208

April 2008 / USA

Class CA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

UniGroup Too Price List

Adaptable Worksurfaces — Laminate

Conference End

Depth

Width

38′′(965mm) 50′′(1270mm) 62′′(1575mm)

30′′(762mm)

WUDC-3830

WUDC-5030 62"

WUDC-6230

(V) Cascade Group I

(V) Cascade Group II

$424 476 496

$499 529 551

$518 566 589

$545 593 616

To Order, Specify: 1) Product number.

Includes worksurface and tie plate. High-pressure laminate with: –Full perimeter T-mold (T), or –3mm edgeband (J) on user edge and 1mm edgeband on back, or –Cascade (V) on user edge and 1mm edgeband on back. Worksurfaces predrilled to accept most support options. Optional wireway can be specified to accommodate panel end-of-run trim. Depths and widths shown in nominal dimensions. Available on RUSH with Standard Core.

Specification Tips

30"

30"

WUDC-3830-L WUDC-5030-L WUDC-6230-L

(J) Edgeband

• • • •

• 50"

1 2 3

(T) T-Mold

Features

• • •

38"

Laminate Number

• Designed to be mounted on UniGroup Too, UniGroup and PLACES. • Worksurface support specific to product line; must be separately specified. • –Support column or leg • –Worksurface support panel • –Standard link cantilever bracket. • –In addition to a column support or leg, two flush mount plates are required and must be separately specified. • If using end-of-run finish post specify notched or curved wireway option. Note: Grain direction will run across 62′′(1575mm)-wide conference end worksurface.

T-Mold or Edgeband 2) Laminate surface color. 3) Edge trim color.

Cascade 1) Product number. 2) Laminate surface color. 3) Side/back edgeband trim color. 4) Front Cascade edge trim color.* *Cascade translucent edge is priced as Group II

1 Edge Options: T

T-Mold

J

Edgeband

V

Cascade

2 Core Options: S

Standard

G Green, add $94 list.

3 Wireway Options: A Notched B Curved C Without

Class CA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

209

UniGroup Too Price List

Adaptable Worksurfaces — Laminate

Key Conference End

Depth

Width

Laminate Number

38′′(965mm) 50′′(1270mm)

30′′(762mm) 30′′(762mm) 36′′(914mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm)

WURY-3830-L WURY-5030-L WURY-5036-L WURY-6236-L WURY-6242-L WURY-6248-L

62′′(1575mm)

WURY-3830

(V) Cascade Group I

(V) Cascade Group II

$557 $566 573 $578 582 607

$621 $631 639 $644 648 676

$666 $677 685 $691 695 725

$693 $704 712 $718 722 752

To Order, Specify:

• • • •

1) Product number.

• •

30"

(J) Edgeband

Features

• • •

38" Depth

1 2 3

(T) T-Mold

Includes worksurface and tie plate. High-pressure laminate with: –Full perimeter T-mold (T), or –3mm edgeband (J) on user edge and 1mm edgeband on back, or –Cascade (V) on user edge and 1mm edgeband on back. Worksurfaces predrilled to accept most support options. Wireway along back edge is color-matched to solid side/back edge trim. When wood grain laminate is specified, wireway will be Charcoal. Refer to Specification Guide for wireway details. Depths and widths shown in nominal dimensions. Wireway required to accommodate end-of-run trim. Available on RUSH with Standard Core.

Specification Tips

50" Depth

Width 30" 36"

WURY-5030 WURY-5036

62" Depth

• Designed to be mounted on UniGroup Too, UniGroup and PLACES. • Worksurface support specific to product line; must be separately specified. • –Support column or leg • –Worksurface support panel • –Standard link cantilever bracket. • –In addition to a column support or leg, two flush mount plates are required and must be separately specified. • If using end-of-run finish post specify notched or curved wireway option. Note: Grain direction will run across 62′′(1575mm)-wide conference end worksurface.

T-Mold or Edgeband 2) Laminate surface color. 3) Edge trim color.

Cascade 1) Product number. 2) Laminate surface color. 3) Side/back edgeband trim color. 4) Front Cascade edge trim color.* *Cascade translucent edge is priced as Group II

1 Edge Options: T

T-Mold

J

Edgeband

V

Cascade

2 Core Options: S

Standard

G Green, add $94 list.

3 Wireway Options: A Notched

Width

B Curved C Without

36" 42" 48"

WURY-6236 WURY-6242 WURY-6248

NOTE: Grain direction for laminate Key Conference End over 62 ′′(1575mm) deep will be reversed.

210

April 2008 / USA

Class CA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

UniGroup Too Price List

Adaptable Worksurfaces — Laminate

120° Link

Depth

Laminate Number

18′′(457mm) 24′′(610mm) 30′′(762mm)

WUDZ-1820-L WUDZ-2426-L WUDZ-3032-L

1 2 C C C

(T) T-Mold

(J) Edgeband

(V) Cascade Group I

(V) Cascade Group II

$216 241 346

$242 273 375

$261 296 396

$288 323 423

Features

To Order, Specify:

• • • •

1) Product number.

Includes worksurface and tie plate. High-pressure laminate with: –Full perimeter T-mold (T), or –3mm edgeband (J) on user edge and 1mm edgeband on sides and back, or • –Cascade (V) on user edge and 1mm edgeband on sides and back. • Worksurfaces predrilled to accept most support options. • Depths and widths shown in nominal dimensions. Available on RUSH with Standard Core.

T-Mold or Edgeband 2) Laminate surface color. 3) Edge trim color.

Cascade 1) Product number. 2) Laminate surface color. 3) Side/back edgeband trim color.

Specification Tips

WUDZ

• Designed to be mounted on UniGroup Too, UniGroup and PLACES. • Support column, leg or worksurface support panel may be used dependent upon application. • Use with Corner, 120° Wrap-Around worksurfaces. • Worksurface support specific to product line; must be separately specified. • –Standard link cantilever bracket • –Tie plates with 18′′(457mm) depth • –Flush mount plates with 24′′(610mm)-30′′(762mm) depth

4) Front Cascade edge trim color.* *Cascade translucent edge is priced as Group II

1 Edge Options: T

T-Mold

J

Edgeband

V

Cascade

2 Core Options: S

Standard

G Green, add $94 list.

Class CA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

211

UniGroup Too Price List

Adaptable Worksurfaces — Wood

Rectangular

24" x 60"

24" x 72"

WURA-W

Features • Includes worksurface and tie plate. • Wood veneer worksurface with: • –3mm edgeband (K) on user edge and 1mm edgeband on sides and back, or • –Cascade (M) on user edge and 1mm edgeband on sides and back. • Worksurfaces predrilled to accept most support options. • Optional wireway will be Charcoal. Refer to Specification Guide for wireway details. • 24′′(607mm)- to 60′′(1524mm)-wide worksurfaces have one wireway. • Worksurfaces wider than 60′′(1524mm) have two wireways. • Installed worksurfaces without wireway will not allow clearance for power plug. • Depths and widths shown in nominal dimensions.

April 2008 / USA

Wood Edgeband or Cascade Wood Edge 1) Product number. 2) Wood finish color.

1 Edge Options: K Wood Edgeband M Wood Cascade

2 Core Options: S

Standard

G Green, add $94 list.

3 Wireway Options:

Specification Tips

A Notched

• For additional widths to span a 3-way panel condition, refer to panel-specific worksurface section. • Worksurface support specific to product line; must be separately specified. • –Cantilever bracket • –Side brackets • –Worksurface support panel • –Worksurface support column or leg • –Attached lower storage • Intermediate support is required for unsupported worksurface span greater than 60′′(1524mm).

B Curved

Note: Separately specified worksurface reinforcement channels provide additional support for worksurfaces with 50′′(1270mm) spans that are heavily loaded and not otherwise supported by mid-span cantilevers, worksurface support panels, columns, legs or attached lower storage.

212

To Order, Specify:

Class CA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

C Without

UniGroup Too Price List

Adaptable Worksurfaces — Wood

Rectangular

Depth

Width

Wood Number

18′′(457mm)

24′′(610mm) 26′′(660mm) 30′′(762mm) 32′′(813mm) 36′′(914mm) 38′′(965mm) 42′′(1067mm) 44′′(1118mm) 48′′(1219mm) 50′′(1270mm) 54′′(1372mm) 56′′(1422mm) 60′′(1524mm) 62′′(1575mm) 66′′(1676mm) 68′′(1727mm) 72′′(1829mm) 74′′(1880mm) 78′′(1981mm) 80′′(2032mm) 84′′(2134mm) 86′′(2184mm) 90′′(2286mm) 92′′(2337mm) 96′′(2438mm) 98′′(2489mm) 102′′(2591mm) 104′′(2642mm) 108′′(2743mm) 110′′(2794mm) 114′′(2890mm) 116′′(2946mm) 120′′(3048mm) 24′′(610mm) 26′′(660mm) 30′′(762mm) 32′′(813mm) 36′′(914mm) 38′′(965mm) 42′′(1067mm) 44′′(1118mm) 48′′(1219mm) 50′′(1270mm) 54′′(1372mm) 56′′(1422mm) 60′′(1524mm) 62′′(1575mm) 66′′(1676mm) 68′′(1727mm) 72′′(2429mm) 74′′(1880mm) 78′′(1981mm) 80′′(2032mm) 84′′(2134mm) 86′′(2184mm) 90′′(2286mm) 92′′(2337mm) 96′′(2438mm) 98′′(2489mm) 102′′(2591mm) 104′′(2642mm) 108′′(2743mm) 110′′(2794mm) 114′′(2890mm) 116′′(2946mm) 120′′(3048mm)

WURA-1824-W WURA-1826-W WURA-1830-W WURA-1832-W WURA-1836-W WURA-1838-W WURA-1842-W WURA-1844-W WURA-1848-W WURA-1850-W WURA-1854-W WURA-1856-W WURA-1860-W WURA-1862-W WURA-1866-W WURA-1868-W WURA-1872-W WURA-1874-W WURA-1878-W WURA-1880-W WURA-1884-W WURA-1886-W WURA-1890-W WURA-1892-W WURA-1896-W WURA-1898-W WURA-18A2-W WURA-18A4-W WURA-18A8-W WURA-18B0-W WURA-18B4-W WURA-18B6-W WURA-18C0-W WURA-2424-W WURA-2426-W WURA-2430-W WURA-2432-W WURA-2436-W WURA-2438-W WURA-2442-W WURA-2444-W WURA-2448-W WURA-2450-W WURA-2454-W WURA-2456-W WURA-2460-W WURA-2462-W WURA-2466-W WURA-2468-W WURA-2472-W WURA-2474-W WURA-2478-W WURA-2480-W WURA-2484-W WURA-2486-W WURA-2490-W WURA-2492-W WURA-2496-W WURA-2498-W WURA-24A2-W WURA-24A4-W WURA-24A8-W WURA-24B0-W WURA-24B4-W WURA-24B6-W WURA-24C0-W

24′′(610mm)

1 2 3

(K) Wood Edgeband Group I

(K) Wood Edgeband Group II

(M) Wood Cascade Group I

(M) Wood Cascade Group II

$ 358 377 391 414 434 441 448 508 571 592 615 635 659 697 734 769 803 830 858 884 912 938 966 972 994 1046 1069 1089 1109 1131 1151 1171 1181 $ 398 418 434 456 479 502 527 600 673 699 725 751 774 820 864 906 943 966 989 1012 1035 1058 1081 1166 1104 1155 1179 1203 1225 1249 1271 1296 1324

$ 377 396 411 435 456 464 471 534 600 622 664 667 692 732 771 808 843 872 901 928 958 985 1014 1021 1044 1098 1122 1143 1164 1187 1209 1229 1240 $ 418 440 456 479 503 528 554 630 707 734 762 789 813 861 907 951 1018 1043 1038 1063 1087 1111 1135 1224 1159 1213 1238 1263 1286 1311 1334 1361 1390

$ 448 471 489 517 543 551 560 636 714 740 769 794 823 871 918 962 1004 1037 1072 1105 1139 1173 1208 1215 1242 1307 1336 1361 1386 1414 1439 1464 1477 $ 497 523 543 570 598 627 659 750 841 873 907 939 968 1025 1080 1132 1179 1208 1236 1265 1294 1322 1351 1456 1380 1444 1474 1504 1531 1561 1589 1620 1654

$ 467 490 509 538 565 574 583 662 743 770 818 826 856 906 955 1001 1044 1079 1115 1149 1185 1220 1256 1264 1292 1359 1389 1415 1441 1470 1497 1522 1536 $ 517 545 565 593 622 653 686 780 875 908 944 977 1007 1066 1123 1177 1254 1285 1285 1316 1346 1375 1405 1514 1435 1502 1533 1564 1592 1623 1652 1685 1720

Class CA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

213

UniGroup Too Price List

Adaptable Worksurfaces — Wood

Rectangular

214

April 2008 / USA

Depth

Width

Wood Number

30′′(762mm)

24′′(610mm) 26′′(660mm) 30′′(762mm) 32′′(813mm) 36′′(914mm) 38′′(965mm) 42′′(1067mm) 44′′(1118mm) 48′′(1219mm) 50′′(1270mm) 54′′(1372mm) 56′′(1422mm) 60′′(1524mm) 62′′(1575mm) 66′′(1676mm) 68′′(1727mm) 72′′(1829mm) 74′′(1880mm) 78′′(1981mm) 80′′(2032mm) 84′′(2134mm) 86′′(2184mm) 90′′(2286mm) 92′′(2337mm) 96′′(2438mm) 98′′(2489mm) 102′′(2591mm) 104′′(2642mm) 108′′(2743mm) 110′′(2794mm) 114′′(2890mm) 116′′(2946mm) 120′′(3048mm)

WURA-3024-W WURA-3026-W WURA-3030-W WURA-3032-W WURA-3036-W WURA-3038-W WURA-3042-W WURA-3044-W WURA-3048-W WURA-3050-W WURA-3054-W WURA-3056-W WURA-3060-W WURA-3062-W WURA-3066-W WURA-3068-W WURA-3072-W WURA-3074-W WURA-3078-W WURA-3080-W WURA-3084-W WURA-3086-W WURA-3090-W WURA-3092-W WURA-3096-W WURA-3098-W WURA-30A2-W WURA-30A4-W WURA-30A8-W WURA-30B0-W WURA-30B4-W WURA-30B6-W WURA-30C0-W

1 2 3

(K) Wood Edgeband Group I

(K) Wood Edgeband Group II

(M) Wood Cascade Group I

(M) Wood Cascade Group II

$ 567 592 619 637 659 675 693 713 755 797 840 884 902 952 1002 1052 1100 1123 1146 1169 1192 1215 1238 1273 1261 1298 1318 1336 1355 1374 1392 1412 1599

$ 596 622 650 669 692 709 728 770 793 837 882 928 947 1000 1052 1105 1188 1179 1238 1227 1251 1276 1300 1335 1324 1363 1384 1402 1422 1442 1461 1482 1670

$ 709 740 774 796 823 844 866 892 944 996 1050 1105 1127 1190 1252 1315 1375 1404 1433 1461 1490 1519 1547 1591 1576 1622 1647 1670 1694 1718 1740 1765 1999

$ 738 770 805 828 856 878 901 949 982 1036 1092 1149 1172 1238 1302 1368 1463 1460 1525 1519 1549 1580 1609 1653 1639 1687 1713 1736 1761 1786 1809 1835 2070

Class CA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

UniGroup Too Price List

Adaptable Worksurfaces — Wood

Rectangular Key

Depth

Width

Wood Number

30′′(762mm)

36′′(914mm) 48′′(1219mm) 48′′(1219mm) 60′′(1524mm) 72′′(1829mm) 60′′(1524mm) 72′′(1829mm) 60′′(1524mm) 72′′(1829mm)

WURY-3036-W WURY-3048-W WURY-3648-W WURY-3660-W WURY-3672-W WURY-4260-W WURY-4272-W WURY-4860-W WURY-4872-W

36′′(914mm)

42′′(1067mm) 48′′(1219mm)

1 2 3

(K) Wood Edgeband Group I

(K) Wood Edgeband Group II

(M) Wood Cascade Group I

(M) Wood Cascade Group II

$1428 1453 $1497 1679 1746 $1756 1826 $1833 1921

$1499 1526 $1572 1763 1833 $1844 1917 $1925 2017

$1739 1816 $1871 2099 2135 $2195 2233 $2272 2401

$1810 1889 $1946 2183 2222 $2283 2324 $2364 2497

Features

WURY-W

To Order, Specify:

• Includes worksurface and tie plate. • Wood veneer surface with: • –3mm edgeband (K) on user edge and 1mm edgeband on sides and back, or • –Cascade (M) on user edge and 1mm edgeband on sides and back. • Worksurface width dimension attaches directly to panel and matches panel width. • Worksurfaces predrilled to accept most support options. • Optional wireways along back edges are Charcoal. Refer to Specification Guide for wireway details. • 72′′(1829mm) worksurface has two wireways. • Installed worksurfaces without wireway will not allow clearance for power plug. • Depths and widths shown in nominal dimensions. • Wireway will accommodate end of run trim.

Specification Tips • Worksurface support specific to product line; must be separately specified. • –Cantilever bracket • –Side brackets • –Worksurface support panel • –Worksurface support column or leg • –Flush mount plates • Worksurface support column is required.

Class CA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

Wood Edgeband or Cascade Wood Edge 1) Product number. 2) Wood finish color.

1 Edge Options: K Wood Edgeband M Wood Cascade

2 Core Options: S

Standard

G Green, add $94 list.

3 Wireway Options: A Notched B Curved C Without

April 2008 / USA

215

UniGroup Too Price List

Adaptable Worksurfaces — Wood

Rectangular Swell

Depth

Swell Depth

18′′(457mm)

21′′(533mm)

24′′(610mm)

27′′(686mm)

30′′(762mm)

33′′(838mm)

WURS-W

Width

Wood Number

24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm)

WURS-1824-WK WURS-1830-WK WURS-1836-WK WURS-1842-WK WURS-1848-WK WURS-1854-WK WURS-1860-WK WURS-2424-WK WURS-2430-WK WURS-2436-WK WURS-2442-WK WURS-2448-WK WURS-2454-WK WURS-2460-WK WURS-3024-WK WURS-3030-WK WURS-3036-WK WURS-3042-WK WURS-3048-WK WURS-3054-WK WURS-3060-WK

Features

Specification Tips • Worksurface support specific to product line; must be separately specified. • –Cantilever bracket • –Side brackets • –Worksurface support panel • –Worksurface support column or leg • Suggested pedestal style is mobile. • Due to manufacturing restrictions, not available with wood Cascade edge. Note: Separately specified worksurface reinforcement channels provide additional support for worksurfaces with 50′′(1270mm) spans that are heavily loaded and not otherwise supported by mid-span cantilevers, worksurface support panels, columns, legs or attached lower storage.

April 2008 / USA

(K) Wood Edgeband Group II

$486 490 498 531 675 727 778 $502 508 516 550 701 755 807 $659 665 671 707 780 853 924

$511 515 523 558 709 764 817 $528 534 542 578 736 793 848 $692 699 705 743 819 896 970

To Order, Specify:

• Includes worksurface and tie plate. • Wood veneer worksurface with: • –3mm edgeband (K) on user edge and 1mm edgeband on sides and back. • Worksurfaces predrilled to accept most support options. • Optional wireway will be Charcoal. Refer to Specification Guide for wireway details. • Installed worksurfaces without wireway will not allow clearance for power plug. • Depths and widths shown in nominal dimensions.

216

1 2

(K) Wood Edgeband Group I

Class CA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

Wood Edgeband 1) Product number. 2) Wood finish color.

1 Core Options: S

Standard

G Green, add $94 list.

2 Wireway Options: A Notched B Curved C Without

UniGroup Too Price List

Adaptable Worksurfaces — Wood

Rectangular Inverse Swell

Depth

Swell Depth

18′′(457mm)

15′′(381mm)

24′′(610mm)

21′′(533mm)

30′′(762mm)

27′′(686mm)

WURW-W

Width

Wood Number

24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm)

WURW-1824-WK WURW-1830-WK WURW-1836-WK WURW-1842-WK WURW-1848-WK WURW-1854-WK WURW-1860-WK WURW-2424-WK WURW-2430-WK WURW-2436-WK WURW-2442-WK WURW-2448-WK WURW-2454-WK WURW-2460-WK WURW-3024-WK WURW-3030-WK WURW-3036-WK WURW-3042-WK WURW-3048-WK WURW-3054-WK WURW-3060-WK

Features

1 2

(K) Wood Edgeband Group I

(K) Wood Edgeband Group II

$486 490 498 531 675 727 778 $502 508 516 550 701 755 807 $659 665 671 707 780 853 924

$511 515 523 558 709 764 817 $528 534 542 578 736 793 848 $692 699 705 743 819 896 970

To Order, Specify:

• Includes worksurface and tie plate. • Wood veneer worksurface with: • –3mm edgeband (K) on user edge and 1mm edgeband on sides and back. • Worksurfaces predrilled to accept most support options. • Optional wireway will be Charcoal. Refer to Specification Guide for wireway details. • Installed worksurfaces without wireway will not allow clearance for power plug. • Depths and widths shown in nominal dimensions.

Specification Tips • Worksurface support specific to product line; must be separately specified. • –Cantilever bracket • –Side brackets • –Worksurface support panel • –Worksurface support column or leg • Suggested pedestal style is mobile. • Due to manufacturing restrictions, not available with wood Cascade edge.

Wood Edgeband 1) Product number. 2) Wood finish color.

1 Core Options: S

Standard

G Green, add $94 list.

2 Wireway Options: A Notched B Curved C Without

Note: Separately specified worksurface reinforcement channels provide additional support for worksurfaces with 50′′(1270mm) spans that are heavily loaded and not otherwise supported by mid-span cantilevers, worksurface support panels, columns, legs or attached lower storage.

Class CA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

217

UniGroup Too Price List

Adaptable Worksurfaces — Wood Left/Right Depth Rectangular Transition

24"

18"

WURT-WN43

18"

24"

WURT-WN34

Width

18′′(457mm)/24′′(610mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 24′′(610mm)/18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 24′′(610mm)/30′′(762mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 30′′(762mm)/24′′(610mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm)

Wood Number

1 2 3

WURT-2424-W WURT-2430-W WURT-2436-W WURT-2442-W WURT-2448-W WURT-2454-W WURT-2460-W WURT-2424-W WURT-2430-W WURT-2436-W WURT-2442-W WURT-2448-W WURT-2454-W WURT-2460-W WURT-3024-W WURT-3030-W WURT-3036-W WURT-3042-W WURT-3048-W WURT-3054-W WURT-3060-W WURT-3024-W WURT-3030-W WURT-3036-W WURT-3042-W WURT-3048-W WURT-3054-W WURT-3060-W

N34 N34 N34 N34 N34 N34 N34 N43 N43 N43 N43 N43 N43 N43 N45 N45 N45 N45 N45 N45 N45 N54 N54 N54 N54 N54 N54 N54

Features

Specification Tips • Worksurface support specific to product line; must be separately specified. • –Cantilever bracket • –Side brackets • –Worksurface support panel • –Worksurface support column or leg • –Attached lower storage • For worksurfaces less than 42′′(1067mm) wide, suggested pedestal style is mobile. • For worksurfaces greater than 42′′(1067mm) wide, attached pedestal may be installed on deepest side. Note: Separately specified worksurface reinforcement channels provide additional support for worksurfaces with 50′′(1270mm) spans that are heavily loaded and not otherwise supported by mid-span cantilevers, worksurface support panels, columns, legs or attached lower storage.

April 2008 / USA

(K) Wood Edgeband Group II

(M) Wood Cascade Group I

(M) Wood Cascade Group II

$535 582 627 673 791 855 918 $535 582 627 673 791 855 918 $554 602 651 699 819 886 951 $554 602 651 699 819 886 951

$562 611 659 707 831 898 964 $562 611 659 707 831 898 964 $582 633 684 734 860 930 999 $582 633 684 734 860 930 999

$ 669 727 784 841 989 1069 1148 $ 669 727 784 841 989 1069 1148 $ 693 753 814 873 1024 1107 1189 $ 693 753 814 873 1024 1107 1189

$ 696 756 816 875 1029 1112 1194 $ 696 756 816 875 1029 1112 1194 $ 721 784 847 908 1065 1151 1237 $ 721 784 847 908 1065 1151 1237

To Order, Specify:

• Includes worksurface and tie plate. • Wood veneer worksurface with: • –3mm edgeband (K) on user edge and 1mm edgeband on sides and back, or • –Cascade (M) on user edge and 1mm edgeband on sides and back. • Worksurfaces predrilled to accept most support options. • Optional wireway will be Charcoal. Refer to Specification Guide for wireway details. • Installed worksurfaces without wireway will not allow clearance for power plug. • Depths and widths shown in nominal dimensions.

218

(K) Wood Edgeband Group I

Class CA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

Wood Edgeband or Cascade Wood Edge 1) Product number. 2) Wood finish color.

1 Edge Options: K Wood Edgeband M Wood Cascade

2 Core Options: S

Standard

G Green, add $94 list.

3 Wireway Options: A Notched B Curved C Without

UniGroup Too Price List

Adaptable Worksurfaces — Wood Transitional Depth Wedge

18"

24"

WURE-WN34

24"

WURE-WN43

18"

Width

24′′(610mm)/18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 18′′(457mm)/24′′(610mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 30′′(762mm)/24′′(610mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 24′′(610mm)/30′′(762mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm)

Wood Number

1 2 3

WURE-2424-W WURE-2430-W WURE-2436-W WURE-2442-W WURE-2448-W WURE-2454-W WURE-2460-W WURE-2424-W WURE-2430-W WURE-2436-W WURE-2442-W WURE-2448-W WURE-2454-W WURE-2460-W WURE-3024-W WURE-3030-W WURE-3036-W WURE-3042-W WURE-3048-W WURE-3054-W WURE-3060-W WURE-3024-W WURE-3030-W WURE-3036-W WURE-3042-W WURE-3048-W WURE-3054-W WURE-3060-W

N43 N43 N43 N43 N43 N43 N43 N34 N34 N34 N34 N34 N34 N34 N54 N54 N54 N54 N54 N54 N54 N45 N45 N45 N45 N45 N45 N45

Features

(K) Wood Edgeband Group I

(K) Wood Edgeband Group II

(M) Wood Cascade Group I

(M) Wood Cascade Group II

$545 594 639 686 807 872 936 $545 594 639 686 807 872 936 $565 615 663 713 836 904 970 $565 615 663 713 836 904 970

$ 559 609 655 703 827 894 1011 $ 559 609 655 703 827 894 1011 $ 580 631 680 731 857 927 994 $ 580 631 680 731 857 927 994

$ 682 743 799 857 1009 1090 1171 $ 682 743 799 857 1009 1090 1171 $ 707 769 829 892 1045 1130 1213 $ 707 769 829 892 1045 1130 1213

$ 696 758 815 874 1029 1112 1246 $ 696 758 815 874 1029 1112 1246 $ 722 785 846 910 1066 1153 1237 $ 722 785 846 910 1066 1153 1237

To Order, Specify:

• Includes worksurface and tie plate. • Wood veneer surface with: • –3mm edgeband (K) on user edge and 1mm edgeband on sides and back. • –Cascade (M) on user edge and 1mm edgeband on sides and back. • Worksurfaces predrilled to accept most support options. • Optional wireways along back edges are Charcoal. Refer to Specification Guide for wireway details. • Installed worksurfaces without wireway will not allow clearance for power plug. • Depths and widths shown in nominal dimensions.

Specification Tips • Worksurface support specific to product line; must be separately specified. • –Cantilever bracket • –Side brackets • –Worksurface support panel • –Worksurface support column or leg • Suggested pedestal style is mobile.

Wood Edgeband 1) Product number. 2) Wood finish color.

1 Edge Options: K Wood Edgeband M Wood Cascade

2 Core Options: S

Standard

G Green, add $94 list.

3 Wireway Options: A Notched B Curved C Without

Note: Separately specified worksurface reinforcement channels provide additional support for worksurfaces with 50′′(1270mm) spans that are heavily loaded and not otherwise supported by mid-span cantilevers, worksurface end panels, posts or attached lower storage.

Class CA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

219

UniGroup Too Price List

Adaptable Worksurfaces — Wood

Rectangular Radius End

(Right-hand orientation)

Depth

Width

Wood Number

18′′(457mm)

24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm)

WURR-1824-W WURR-1830-W WURR-1836-W WURR-1842-W WURR-1848-W WURR-1854-W WURR-1860-W WURR-2424-W WURR-2430-W WURR-2436-W WURR-2442-W WURR-2448-W WURR-2454-W WURR-2460-W WURR-3024-W WURR-3030-W WURR-3036-W WURR-3042-W WURR-3048-W WURR-3054-W WURR-3060-W

24′′(610mm)

(Left-hand orientation) WURR-W

30′′(762mm)

1 2 3 4

(K) Wood Edgeband Group I

(K) Wood Edgeband Group II

(M) Wood Cascade Group I

(M) Wood Cascade Group II

$471 484 535 592 753 809 866 $486 498 553 610 776 834 893 $701 715 755 800 866 924 983

$ 495 509 562 622 791 850 909 $ 511 523 581 641 815 876 938 $ 736 751 793 840 909 970 1032

$ 588 604 669 740 942 1011 1082 $ 607 622 691 762 970 1042 1116 $ 876 894 944 1000 1082 1156 1229

$ 612 629 696 770 980 1052 1125 $ 632 647 719 793 1009 1084 1161 $ 911 930 982 1040 1125 1202 1278

Features

To Order, Specify:

• Includes worksurface and tie plate. • Wood veneer worksurface with: • –3mm edgeband (K) on user edge and 1mm edgeband on side and back, or • –Cascade (M) on user edge and 1mm edgeband on side and back. • Worksurfaces predrilled to accept most support options. • Optional wireway will be Charcoal. Refer to Specification Guide for wireway details. • Installed worksurfaces without wireway will not allow clearance for power plug. • Depths and widths shown in nominal dimensions.

Specification Tips • Worksurface support specific to product line; must be separately specified. • –Cantilever bracket • –Side brackets • –Worksurface support panel • –Worksurface support column or leg • –Attached lower storage (for worksurfaces greater than 36′′ wide) • For edgeband: • –18′′(457mm) and 24′′(610mm) specify the standard mini cantilever bracket for radius end. • –30′′(762mm) specify standard cantilever bracket for radius end. • When using snap-n-fit cantilevers 18′′(457mm) and 24′′(610mm) requires mini snap-n-fit cantilever, 30′′(762mm) requires standard snap-n-fit cantilever. • For Cascade edge, for aesthetic reasons, use: • –Side bracket and column support or leg. • For worksurfaces less than 42′′(1067mm) wide, suggested pedestal style is mobile. Note: Separately specified worksurface reinforcement channels provide additional support for worksurfaces with 50′′(1270mm) spans that are heavily loaded and not otherwise supported by mid-span cantilevers, worksurface support panels, columns, legs or attached lower storage.

220

April 2008 / USA

Class CA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

Wood Edgeband or Cascade Wood Edge 1) Product number. 2) Wood finish color.

1 Edge Options: K Wood Edgeband M Wood Cascade

2 Core Options: S

Standard

G Green, add $94 list.

3 Wireway Options: A Notched B Curved C Without

4 Orientation (as seated): R Right-hand L

Left-hand

UniGroup Too Price List

Adaptable Worksurfaces — Wood

Rectangular — Split Top

Depth

Width

Wood Number

24′′(610mm)

36′′(914mm) 42′′(1067mm) 48′′(1219mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm)

WURK-2436-W WURK-2442-W WURK-2448-W WURK-3036-W WURK-3042-W WURK-3048-W

30′′(762mm)

1 2 3

(K) Wood Edgeband Group I

(K) Wood Edgeband Group II

(M) Wood Cascade Group I

(M) Wood Cascade Group II

$2959 3080 3195 $3113 3234 3350

$3107 3234 3355 $3269 3396 3517

$3699 3850 3994 $3891 4043 4187

$3847 4004 4154 $4047 4205 4354

Features

WURK-W

To Order, Specify:

• Includes rear worksurface, front worksurface, mechanism and tie plate. • Dual worksurfaces with a 1′′(25mm) space between the front and rear worksurfaces. Front worksurface is 12′′(305mm) deep. • Wood veneer worksurface with: • –3mm edgeband (K) or Cascade (M) edge on front and rear worksurface front edge, and 1mm on back and side edge of front and rear worksurface. • Adjustable front worksurface is attached to the rear worksurface with a spring-assist mechanism. • Front worksurface manually adjusts to any position 7′′(178mm) above and 5 3/4′′(146mm) below the rear worksurface. • Front worksurface tilts -15° to +9°. • Spring assist mechanism available in charcoal finish color only. • Optional wireway will be Charcoal. • Installed worksurfaces without wireway will not allow clearance for power plug. • Depths and widths shown in nominal dimensions.

Wood Edgeband or Cascade Wood Edge 1) Product number. 2) Wood finish color.

1 Edge Options: K Wood Edgeband M Wood Cascade

2 Core Options: S

Standard

G Green, add $94 list.

3 Wireway Options: A Notched B Curved C Without

Specification Tip • Fixed-height rear worksurface is predrilled to accept standard cantilever brackets. If using snap-n-fit cantilever on 24′′(610mm) deep worksurfaces, specify snap-n-fit mini cantilever. • Worksurface support specific to product line; must be separately specified. • –Cantilever bracket • –Side brackets • –Worksurface support panel • –Worksurface support column or leg

Class CA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

221

UniGroup Too Price List

Adaptable Worksurfaces — Wood Left/Right Depth Corner, 90° Straight Front

18′′(457mm)

24′′(610mm)

30′′(762mm)

Width

Wood Number

36′′(914mm) 42′′(1067mm) 48′′(1219mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm)

WUCA-3636-WK WUCA-4242-WK WUCA-4848-WK WUCA-3636-WK WUCA-4242-WK WUCA-4848-WK WUCA-3636-WK WUCA-4242-WK WUCA-4848-WK

1 2

Features

Specification Tips • Rear corner bracket is required and must be separately specified. • Worksurface support specific to product line; must be separately specified. • –Rear corner bracket - REQUIRED • –Cantilever bracket • –Worksurface support panel • –Side brackets • Recommend the AKPM-23 or AKPS-5 keyboard pad for 36′′(914mm)-wide corners. • Due to manufacturing restrictions, not available with wood Cascade edge.

222

April 2008 / USA

(K) Wood Edgeband Group II

$619 680 806 $633 694 820 $705 766 892

$651 715 847 $665 729 861 $737 801 933

To Order, Specify:

• Includes worksurface and tie plate. • Wood veneer worksurface with: • –3mm edgeband (K) on user edge and 1mm edgeband on sides and back. • Worksurfaces predrilled to accept most support options. • Optional wireway will be Charcoal. • Installed worksurfaces without wireway will not allow clearance for power plug. • Depths and widths shown in nominal dimensions.

WUCA-W

N33 N33 N33 N44 N44 N44 N55 N55 N55

(K) Wood Edgeband Group I

Class CA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

Wood Edgeband 1) Product number. 2) Wood finish color.

1 Core Options: S

Standard

G Green, add $94 list.

2 Wireway Options: A Notched B Curved C Without

UniGroup Too Price List

Adaptable Worksurfaces — Wood Left/Right Depth Corner, 90° Wrap-Around

WUCR-W

Width

18′′(457mm)

Wood Number

36′′(914mm) WUCR-3636-W 42′′(1067mm) WUCR-4242-W 48′′(1219mm) WUCR-4848-W 24′′(610mm) 36′′(914mm) WUCR-3636-W 42′′(1067mm) WUCR-4242-W 48′′(1219mm) WUCR-4848-W 30′′(762mm) 36′′(914mm) (1) WUCR-3636-W 42′′(1067mm) WUCR-4242-W 48′′(1219mm) WUCR-4848-W (1) Cascade edge option not available in this size.

1 2 3 N33 N33 N33 N44 N44 N44 N55 N55 N55

(K) Wood Edgeband Group I

(K) Wood Edgeband Group II

(M) Wood Cascade Group I

(M) Wood Cascade Group II

$600 659 780 $614 673 794 $686 745 866

$632 694 821 $646 708 835 $718 780 907

$ 758 832 984 $ 772 846 998 N/A 918 1070

$ 790 867 1025 $ 804 881 1039 N/A 953 1111

Features

To Order, Specify:

• Includes worksurface. • Wood veneer worksurface with: • –3mm edgeband (K) on user edge and 1mm edgeband on sides and back, or • –Cascade (M) on user edge and 1mm edgeband on sides and back. • Worksurfaces predrilled to accept most support options. • Optional wireway will be Charcoal. Refer to Specification Guide for wireway details. • Installed worksurfaces without wireway will not allow clearance for power plug. • Depths and widths shown in nominal dimensions.

Specification Tips • Rear corner bracket is required and must be separately specified. • Worksurface support specific to product line; must be separately specified. • –Rear corner bracket - REQUIRED • –Cantilever bracket • –Worksurface support panel • –Side brackets • Recommend the AKPM-23 or AKPS-5 keyboard pad for 36′′(914mm)-wide corners.

Class CA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

Wood Edgeband or Cascade Wood Edge 1) Product number. 2) Wood finish color.

1 Edge Options: K Wood Edgeband M Wood Cascade

2 Core Options: S

Standard

G Green, add $94 list.

3 Wireway Options: A Notched B Curved C Without

April 2008 / USA

223

UniGroup Too Price List

Adaptable Worksurfaces — Wood Left/Right Depth Corner, 90° Notched

Width

18′′(457mm)

Wood Number

36′′(914mm) WUCN-3636-W 42′′(1067mm) WUCN-4242-W 48′′(1219mm) WUCN-4848-W 24′′(610mm) 36′′(914mm) WUCN-3636-W 42′′(1067mm) WUCN-4242-W 48′′(1219mm) WUCN-4848-W 30′′(762mm) 36′′(914mm) (1) WUCN-3636-W 42′′(1067mm) WUCN-4242-W 48′′(1219mm) WUCN-4848-W (1) Cascade edge option not available in this size.

1 2 3 N33 N33 N33 N44 N44 N44 N55 N55 N55

(K) Wood Edgeband Group I

(K) Wood Edgeband Group II

(M) Wood Cascade Group I

(M) Wood Cascade Group II

$608 680 816 $622 694 830 $634 706 842

$629 703 843 $643 717 857 $655 729 869

$ 760 850 1020 $ 774 864 1034 N/A 876 1046

$ 781 873 1047 $ 795 887 1061 N/A 899 1073

Features

WUCN-W

To Order, Specify:

• Includes worksurface and tie plate. • Wood veneer surface with: • –3mm edgeband (K) on user edge and 1mm edgeband on sides and back. • –Cascade (M) on user edge and 1mm edgeband on sides and back. • Worksurfaces predrilled to accept most support options. • Optional wireways along back edges are Charcoal. Refer to Specification Guide for wireway details. • Installed worksurfaces without wireway will not allow clearance for power plug. • Depths and widths shown in nominal dimensions.

Specification Tips • Rear corner bracket is required and must be separately specified. • Worksurface support specific to product line; must be separately specified. • –Rear corner bracket - REQUIRED • –Cantilever bracket • –Worksurface support panel • –Side brackets • Recommend the AKPM-23 or AKPS-5 keyboard pad for 36′′(914mm)-wide corners.

224

April 2008 / USA

Class CA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

Wood Edgeband or Cascade Wood Edge 1) Product number. 2) Wood finish color.

1 Edge Options: K Wood Edge Band M Wood Cascade

2 Core Options: S

Standard

G Green, add $94 list.

3 Wireway Options: A Notched B Curved C Without

UniGroup Too Price List

Adaptable Worksurfaces — Wood Left/Right Depth Corner, 90° Angled

18′′(457mm)

24′′(610mm)

30′′(762mm)

Width

Wood Number

36′′(914mm) 42′′(1067mm) 48′′(1219mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm)

WUCU-3636-WK WUCU-4242-WK WUCU-4848-WK WUCU-3636-WK WUCU-4242-WK WUCU-4848-WK WUCU-3636-WK WUCU-4242-WK WUCU-4848-WK

1 2 3

Features (Left-hand orientation)

(Right-hand orientation) WUCU-W

33 33 33 44 44 44 55 55 55

(K) Wood Edgeband Group I

(K) Wood Edgeband Group II

$603 684 820 $617 698 834 $629 710 846

$626 707 847 $640 721 861 $652 733 873

To Order, Specify:

• Includes worksurface and tie plate. • Wood veneer surface with: • –3mm edgeband (K) on user edge and 1mm edgeband on sides and back. • Optional wireways along back edges are Charcoal. Refer to Specification Guide for wireway details. • Installed worksurfaces without wireway will not allow clearance for power plug. • Depths and widths shown in nominal dimensions.

Specification Tips • Rear corner bracket is required and must be separately specified. • Worksurface support specific to product line; must be separately specified. • –Rear corner bracket - REQUIRED • –Cantilever bracket • –Worksurface support panel • –Side brackets • Recommend the AKPM-23 or AKPS-5 keyboard pad for 36′′(914mm)-wide corners. • Due to manufacturing restrictions, not available with wood Cascade edge.

Class CA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

Wood Edgeband 1) Product number. 2) Wood finish color.

1 Core Options: S

Standard

G Green, add $94 list.

2 Wireway Options: A Notched B Curved C Without

3 Orientation (as seated): R Right-hand L

Left-hand

April 2008 / USA

225

UniGroup Too Price List

Adaptable Worksurfaces — Wood Left/Right Depth Corner, 90° Wrap-Around Transitional

24"

18"

WUCT-WN34

Width

Wood Number

1 2 3

18′′(457mm)/24′′(610mm) 36′′(914mm) WUCT-3636-W 42′′(1067mm) WUCT-4242-W 48′′(1219mm) WUCT-4848-W 24′′(610mm)/18′′(457mm) 36′′(914mm) WUCT-3636-W 42′′(1067mm) WUCT-4242-W 48′′(1219mm) WUCT-4848-W 24′′(610mm)/30′′(762mm) 36′′(914mm) (1) WUCT-3636-W 42′′(1067mm) WUCT-4242-W 48′′(1219mm) WUCT-4848-W 30′′(762mm)/24′′(610mm) 36′′(914mm) (1) WUCT-3636-W 42′′(1067mm) WUCT-4242-W 48′′(1219mm) WUCT-4848-W (1) Cascade edge option not available in these sizes.

N34 N34 N34 N43 N43 N43 N45 N45 N45 N54 N54 N54

Features

24"

18"

WUCT-WN43

• Rear corner bracket is required and must be separately specified. • Worksurface support specific to product line; must be separately specified. • –Rear corner bracket - REQUIRED • –Cantilever bracket • –Worksurface support panel • –Side brackets • Recommend the AKPM-23 or AKPS-5 keyboard pad for 36′′(914mm)-wide corners.

April 2008 / USA

(K) Wood Edgeband Group II

(M) Wood Cascade Group I

(M) Wood Cascade Group II

$587 643 764 $587 643 764 $655 720 854 $655 720 854

$619 678 805 $619 678 805 $687 755 895 $687 755 895

$ 743 813 966 $ 743 813 966 N/A 890 1056 N/A 890 1056

$ 775 848 1007 $ 775 848 1007 N/A 925 1097 N/A 925 1097

To Order, Specify:

• Includes worksurface. • Wood veneer worksurface with: • –3mm edgeband (K) on user edge and 1mm edgeband on sides and back, or • –Cascade (M) on user edge and 1mm edgeband on sides and back. • Worksurfaces predrilled to accept most support options. • Optional wireway will be Charcoal. Refer to Specification Guide for wireway details. • Installed worksurfaces without wireway will not allow clearance for power plug. • Depths and widths shown in nominal dimensions.

Specification Tips

226

(K) Wood Edgeband Group I

Class CA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

Wood Edgeband or Cascade Wood Edge 1) Product number. 2) Wood finish color.

1 Edge Options: K Wood Edgeband M Wood Cascade

2 Core Options: S

Standard

G Green, add $94 list.

3 Wireway Options: A Notched B Curved C Without

UniGroup Too Price List

Adaptable Worksurfaces — Wood Transitional Left/Right Depth Corner, 90° Notched Transitional

24"

18"

WUCH-WN34

Width

Wood Number

1 2 3

18′′(457mm)/24′′(610mm) 36′′(914mm) WUCH-3636-W 42′′(1067mm) WUCH-4242-W 48′′(1219mm) WUCH-4848-W 24′′(610mm)/18′′(457mm) 36′′(914mm) WUCH-3636-W 42′′(1067mm) WUCH-4242-W 48′′(1219mm) WUCH-4848-W 24′′(610mm)/30′′(762mm) 36′′(914mm) (1) WUCH-3636-W 42′′(1067mm) WUCH-4242-W 48′′(1219mm) WUCH-4848-W 30′′(762mm)/24′′(610mm) 36′′(914mm) (1) WUCH-3636-W 42′′(1067mm) WUCH-4242-W 48′′(1219mm) WUCH-4848-W (1) Cascade edge option not available in these sizes.

N34 N34 N34 N43 N43 N43 N45 N45 N45 N54 N54 N54

Features 24"

WUCH-WN43

18"

(K) Wood Edgeband Group I

(K) Wood Edgeband Group II

(M) Wood Cascade Group I

(M) Wood Cascade Group II

$594 652 775 $594 652 775 $625 683 806 $625 683 806

$614 674 801 $614 674 801 $645 705 832 $645 705 832

$ 743 824 969 $ 743 824 969 N/A 855 1000 N/A 855 1000

$ 763 846 995 $ 763 846 995 N/A 877 1026 N/A 877 1026

To Order, Specify:

• Includes worksurface and tie plate. • Wood veneer surface with: • –3mm edgeband (K) on user edge and 1mm edgeband on sides and back, or • –Cascade (M) on user edge and 1mm edgeband on sides and back. • Worksurfaces predrilled to accept most support options. • Optional wireways along back edges are Charcoal. Refer to Specification Guide for wireway details. • Installed worksurfaces without wireway will not allow clearance for power plug. • Depths and widths shown in nominal dimensions.

Specification Tips • Rear corner bracket is required and must be separately specified. • Worksurface support specific to product line; must be separately specified. • –Rear corner bracket - REQUIRED • –Cantilever bracket • –Worksurface support panel • –Side brackets • Recommend the AKPM-23 or AKPS-5 keyboard pad for 36′′(914mm)-wide corners.

Class CA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

Wood Edgeband or Cascade Wood Edge 1) Product number. 2) Wood finish color.

1 Edge Options: K Wood Edgeband M Wood Cascade

2 Core Options: S

Standard

G Green, add $94 list.

3 Wireway Options: A Notched B Curved C Without

April 2008 / USA

227

UniGroup Too Price List

Adaptable Worksurfaces — Wood Transitional Left/Right Depth Corner, 90° Angled Transitional

18′′(457mm)/24′′(610mm)

24′′(610mm)/18′′(457mm)

24′′(610mm)/30′′(762mm) 30"

30′′(762mm)/24′′(610mm)

24"

Width

Wood Number

36′′(914mm) 42′′(1067mm) 48′′(1219mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm)

WUCF-3636-WK WUCF-4242-WK WUCF-4848-WK WUCF-3636-WK WUCF-4242-WK WUCF-4848-WK WUCF-3636-WK WUCF-4242-WK WUCF-4848-WK WUCF-3636-WK WUCF-4242-WK WUCF-4848-WK

(Left-hand orientation)

Features

WUCF-WN45

• Includes worksurface and tie plate. • Wood veneer surface with: • –3mm edgeband (K) on user edge and 1mm edgeband on sides and back. • Optional wireways along back edges are Charcoal. Refer to Specification Guide for wireway details. • Installed worksurfaces without wireway will not allow clearance for power plug. • Depths and widths shown in nominal dimensions.

30"

24"

1 2 3 34 34 34 43 43 43 45 45 45 54 54 54

(K) Wood Edgeband Group I

(K) Wood Edgeband Group II

$530 655 780 $530 655 780 $561 686 811 $561 686 811

$548 677 806 $548 677 806 $579 708 837 $579 708 837

To Order, Specify: Wood Edgeband 1) Product number. 2) Wood finish color.

1 Core Options: S

Standard

G Green, add $94 list.

(Right-hand orientation) WUCF-WN54

Specification Tips • Rear corner bracket is required and must be separately specified. • Worksurface support specific to product line; must be separately specified. • –Rear corner bracket - REQUIRED • –Cantilever bracket • –Worksurface support panel • –Side brackets • Recommend the AKPM-23 or AKPS-5 keyboard pad for 36′′(914mm)-wide corners. • Due to manufacturing restrictions, not available with wood Cascade edge.

228

April 2008 / USA

Class CA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

2 Wireway Options: A Notched B Curved C Without

3 Orientation (as seated): R Right-hand L

Left-hand

UniGroup Too Price List

Adaptable Worksurfaces — Wood

Corner, 90° Split Top

Left/Right Depth

Width

Wood Number

24′′(610mm) 30′′(762mm)

48′′(1219mm) 48′′(1219mm)

WUCK-4848-W WUCK-4848-W

1 2 3 N44 N55

(K) Wood Edgeband Group I

(K) Wood Edgeband Group II

(M) Wood Cascade Group I

(M) Wood Cascade Group II

$2587 $2637

$2718 $2768

$3231 $3281

$3362 $3412

Features

WUCK-W

To Order, Specify:

• Includes rear worksurface, front worksurface, mechanism, and tie plate. • Dual worksurfaces with a 1′′(25mm) space between the front and rear worksurfaces. Front worksurface is 12′′(305mm) deep. • Wood veneer worksurface with: • –3mm edgeband (K) or Cascade (M) edge on front and rear worksurface front edge and 1mm on back and side edge of front and rear worksurface. • Adjustable front worksurface is attached to the rear worksurface with a spring-assist mechanism. • Front worksurface manually adjusts to any position 7′′(178mm) above and 5 3/4′′(146mm) below the rear worksurface. • Front worksurface tilts -15° to +9°. • Spring assist mechanism available in charcoal finish color only. • Optional wireway will be Charcoal. Refer to Specification Guide for wireway details. • Installed worksurfaces without wireway will not allow clearance for power plug. • Depths and widths shown in nominal dimensions.

Wood Edgeband or Cascade Wood Edge 1) Product number. 2) Wood finish color.

1 Edge Options: K Wood Edgeband M Wood Cascade

2 Core Options: S

Standard

G Green, add $94 list.

3 Wireway Options: A Notched B Curved C Without

Specification Tips • Rear corner bracket is required and must be separately specified. • Worksurface support specific to product line; must be separately specified. • –Rear corner bracket - REQUIRED • –Cantilever bracket • –Worksurface support panel • –Side brackets • Fixed-height rear worksurface is predrilled to accept standard cantilever brackets. If using snap-n-fit cantilever on 24′′(610mm) deep worksurfaces, specify snap-n-fit mini cantilever.

Class CA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

229

UniGroup Too Price List

Adaptable Worksurfaces — Wood

Corner, 90° Wrap-Around Extended

24"

24"

Features • Includes worksurface and tie plate. • Wood veneer worksurface with: • –3mm edgeband (K) on user edge and 1mm edgeband on sides and back, or • –Cascade (M) on user edge and 1mm edgeband on sides and back. • Worksurfaces predrilled to accept most support options. • Optional wireway will be Charcoal. Refer to Specification Guide for wireway details. • Installed worksurfaces without wireway will not allow clearance for power plug. • Depths and widths shown in nominal dimensions.

Wood Edgeband or Cascade Wood Edge 1) Product number. 2) Wood finish color.

1 Edge Options: K Wood Edgeband M Wood Cascade

2 Core Options: S

Standard

G Green, add $94 list.

(Right-hand orientation)

Specification Tips

WUCE-WR44

• Rear corner bracket is required and must be separately specified. • Worksurface support specific to product line; must be separately specified. • –Rear corner bracket - REQUIRED • –Cantilever bracket • –Worksurface support panel • –Worksurface support column or leg • –Side brackets • –Attached lower storage • Recommend the AKPM-23 or AKPS-5 keyboard pad for 36′′(914mm)-wide corners.

24"

24"

(Left-hand orientation) WUCE-WL44

Note: Separately specified worksurface reinforcement channels provide additional support for worksurfaces with 50′′(1270mm) spans that are heavily loaded and not otherwise supported by mid-span cantilevers, worksurface support panels, columns, legs or attached lower storage.

230

To Order, Specify:

April 2008 / USA

Class CA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

3 Wireway Options: A Notched B Curved C Without

4 Orientation (as seated): R Right-hand L

Left-hand

UniGroup Too Price List

Adaptable Worksurfaces — Wood Left/Right Depth Width Corner, 90° Wrap-Around Extended

18′′(457mm) 36′′(914mm)

24′′(610mm) 36′′(914mm)

30′′(762mm) 36′′(914mm)

18′′(457mm) 42′′(1067mm)

24′′(610mm) 42′′(1067mm)

30′′(762mm) 42′′(1067mm)

18′′(457mm) 48′′(1219mm)

24′′(610mm) 48′′(1219mm)

30′′(762mm) 48′′(1219mm)

Length

Wood Number

42′′(1067mm) WUCE-3642-W 48′′(1219mm) WUCE-3648-W 54′′(1372mm) WUCE-3654-W 60′′(1524mm) WUCE-3660-W 66′′(1676mm) WUCE-3666-W 72′′(1829mm) WUCE-3672-W 42′′(1067mm) WUCE-3642-W 48′′(1219mm) WUCE-3648-W 54′′(1372mm) WUCE-3654-W 60′′(1524mm) WUCE-3660-W 66′′(6764mm) WUCE-3666-W 72′′(1829mm) WUCE-3672-W 42′′(1067mm)(1) WUCE-3642-W 48′′(1219mm)(1) WUCE-3648-W 54′′(1372mm)(1) WUCE-3654-W 60′′(1524mm)(1) WUCE-3660-W 66′′(1676mm)(1) WUCE-3666-W 72′′(1829mm)(1) WUCE-3672-W 48′′(1219mm) WUCE-4248-W 54′′(1372mm) WUCE-4254-W 60′′(1524mm) WUCE-4260-W 66′′(1676mm) WUCE-4266-W 72′′(1829mm) WUCE-4272-W 48′′(1219mm) WUCE-4248-W 54′′(1372mm) WUCE-4254-W 60′′(1524mm) WUCE-4260-W 66′′(1676mm) WUCE-4266-W 72′′(1829mm) WUCE-4272-W 48′′(1067mm) WUCE-4248-W 54′′(1372mm) WUCE-4254-W 60′′(1524mm) WUCE-4260-W 66′′(1676mm) WUCE-4266-W 72′′(1829mm) WUCE-4272-W 54′′(1372mm) WUCE-4854-W 60′′(1524mm) WUCE-4860-W 66′′(1676mm) WUCE-4866-W 72′′(1829mm) WUCE-4872-W 54′′(1372mm) WUCE-4854-W 60′′(1524mm) WUCE-4860-W 66′′(1676mm) WUCE-4866-W 72′′(1829mm) WUCE-4872-W 54′′(1372mm) WUCE-4854-W 60′′(1524mm) WUCE-4860-W 66′′(1676mm) WUCE-4866-W 72′′(1829mm) WUCE-4872-W

1 2 3 4 33 33 33 33 33 33 44 44 44 44 44 44 55 55 55 55 55 55 33 33 33 33 33 44 44 44 44 44 55 55 55 55 55 33 33 33 33 44 44 44 44 55 55 55 55

(K) Wood Edgeband Group I

(K) Wood Edgeband Group II

(M) Wood Cascade Group I

(M) Wood Cascade Group II

$1006 1016 1025 1034 1145 1255 $1028 1038 1047 1056 1167 1277 $1160 1170 1179 1188 1299 1409 $1031 1041 1052 1165 1280 $1053 1063 1074 1187 1302 $1185 1195 1206 1319 1434 $1061 1068 1184 1301 $1083 1090 1206 1323 $1215 1222 1338 1455

$1059 1070 1079 1089 1203 1320 $1081 1092 1101 1111 1225 1342 $1213 1224 1233 1243 1357 1474 $1085 1095 1107 1223 1345 $1107 1117 1129 1245 1367 $1239 1249 1261 1377 1499 $1115 1153 1242 1366 $1137 1175 1264 1388 $1269 1307 1396 1520

$1296 1308 1320 1331 1469 1607 $1318 1330 1342 1353 1491 1629 N/A N/A N/A N/A N/A N/A $1321 1333 1347 1462 1604 $1343 1355 1369 1484 1626 $1475 1487 1501 1616 1758 $1356 1365 1508 1653 $1378 1387 1530 1675 $1510 1519 1662 1807

$1349 1362 1374 1386 1527 1672 $1371 1384 1396 1408 1549 1694 N/A N/A N/A N/A N/A N/A $1375 1387 1402 1520 1669 $1397 1409 1424 1542 1691 $1529 1541 1556 1674 1823 $1410 1450 1566 1718 $1432 1472 1588 1740 $1564 1604 1720 1872

(1)

Cascade edge option not available in these sizes.

Class CA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

231

UniGroup Too Price List

Adaptable Worksurfaces — Wood

Corner, 90° Notched Extended

24"

24"

Features • Includes worksurface and tie plate. • Wood veneer worksurface with: • –3mm edgeband (K) on user edge and 1mm edgeband on sides and back, or • –Cascade (M) on user edge and 1mm edgeband on sides and back. • Worksurfaces predrilled to accept an adjustable keyboard and most support options. • Optional wireways along back edges are Charcoal. Refer to Specification Guide for wireway details. • Installed worksurfaces without wireway will not allow clearance for power plug. • Depths and widths shown in nominal dimensions.

Wood Edgeband or Cascade Wood Edge 1) Product number. 2) Wood finish color.

1 Edge Options: K Wood Edgeband M Wood Cascade

2 Core Options: S

Standard

G Green, add $94 list.

(Right-hand orientation)

Specification Tips

WUCP-WR44

• Rear corner bracket is required and must be separately specified. • Worksurface support specific to product line; must be separately specified. • –Rear corner bracket - REQUIRED • –Cantilever bracket • –Worksurface support panel • –Side brackets • Recommend the AKPM-23 or AKPS-5 keyboard pad for 36′′(914mm)-wide corners.

24"

24"

(Left-hand orientation) WUCP-WL44

Note: Separately specified worksurface reinforcement channels provide additional support for worksurfaces with 50′′(1270mm) spans that are heavily loaded and not otherwise supported by mid-span cantilevers, worksurface end panels, posts or attached lower storage.

232

To Order, Specify:

April 2008 / USA

Class CA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

3 Wireway Options: A Notched B Curved C Without

4 Orientation (as seated): R Right-hand L

Left-hand

UniGroup Too Price List

Adaptable Worksurfaces — Wood Left/Right Depth Width Corner, 90° Notched Extended

18′′(457mm) 36′′(914mm)

24′′(610mm) 36′′(914mm)

30′′(762mm) 36′′(914mm)

18′′(457mm) 42′′(1067mm)

24′′(610mm) 42′′(1067mm)

30′′(762mm) 42′′(1067mm)

18′′(457mm) 48′′(1219mm)

24′′(610mm) 48′′(1219mm)

30′′(762mm) 48′′(1219mm)

Length

Wood Number

42′′(1067mm) WUCP-3642-W 48′′(1219mm) WUCP-3648-W 54′′(1372mm) WUCP-3654-W 60′′(1524mm) WUCP-3660-W 66′′(1676mm) WUCP-3666-W 72′′(1829mm) WUCP-3672-W 42′′(1067mm) WUCP-3642-W 48′′(1219mm) WUCP-3648-W 54′′(1372mm) WUCP-3654-W 60′′(1524mm) WUCP-3660-W 66′′(1676mm) WUCP-3666-W 72′′(1829mm) WUCP-3672-W 42′′(1067mm)(1) WUCP-3642-W 48′′(1219mm)(1) WUCP-3648-W 54′′(1372mm)(1) WUCP-3654-W 60′′(1524mm)(1) WUCP-3660-W 66′′(1676mm)(1) WUCP-3666-W 72′′(1829mm)(1) WUCP-3672-W 48′′(1219mm) WUCP-4248-W 54′′(1372mm) WUCP-4254-W 60′′(1524mm) WUCP-4260-W 66′′(1676mm) WUCP-4266-W 72′′(1829mm) WUCP-4272-W 48′′(1219mm) WUCP-4248-W 54′′(1372mm) WUCP-4254-W 60′′(1524mm) WUCP-4260-W 66′′(1676mm) WUCP-4266-W 72′′(1829mm) WUCP-4272-W 48′′(1219mm) WUCP-4248-W 54′′(1372mm) WUCP-4254-W 60′′(1524mm) WUCP-4260-W 66′′(1676mm) WUCP-4266-W 72′′(1829mm) WUCP-4272-W 54′′(1372mm) WUCP-4854-W 60′′(1524mm) WUCP-4860-W 66′′(1676mm) WUCP-4866-W 72′′(1829mm) WUCP-4872-W 54′′(1372mm) WUCP-4854-W 60′′(1524mm) WUCP-4860-W 66′′(1676mm) WUCP-4866-W 72′′(1829mm) WUCP-4872-W 54′′(1372mm) WUCP-4854-W 60′′(1524mm) WUCP-4860-W 66′′(1676mm) WUCP-4866-W 72′′(1829mm) WUCP-4872-W

1 2 3 4 33 33 33 33 33 33 44 44 44 44 44 44 55 55 55 55 55 55 33 33 33 33 33 44 44 44 44 44 55 55 55 55 55 33 33 33 33 44 44 44 44 55 55 55 55

(K) Wood Edgeband Group I

(K) Wood Edgeband Group II

(M) Wood Cascade Group I

(M) Wood Cascade Group II

$1022 1031 1040 1050 1161 1274 $1044 1053 1062 1072 1183 1296 $1064 1073 1082 1092 1203 1316 $1047 1058 1067 1181 1298 $1069 1080 1089 1203 1320 $1089 1100 1109 1223 1340 $1076 1083 1202 1321 $1098 1105 1224 1343 $1118 1125 1244 1363

$1056 1065 1075 1085 1199 1316 $1078 1087 1097 1107 1221 1338 $1098 1107 1117 1127 1241 1358 $1082 1093 1102 1220 1341 $1104 1115 1124 1242 1363 $1124 1135 1144 1262 1383 $1112 1119 1242 1365 $1134 1141 1264 1387 $1154 1161 1284 1407

$1278 1289 1300 1312 1452 1592 $1300 1311 1322 1334 1474 1614 N/A N/A N/A N/A N/A N/A $1309 1322 1334 1477 1622 $1331 1344 1356 1499 1644 $1331 1364 1376 1519 1664 $1345 1354 1503 1651 $1367 1376 1525 1673 $1387 1396 1545 1693

$1312 1323 1335 1347 1490 1634 $1334 1345 1357 1369 1512 1656 N/A N/A N/A N/A N/A N/A $1344 1357 1369 1516 1665 $1366 1379 1391 1538 1687 $1366 1399 1411 1558 1707 $1381 1390 1543 1695 $1403 1412 1565 1717 $1423 1432 1585 1737

(1)

Cascade edge option not available in these sizes.

Class CA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

233

UniGroup Too Price List

Adaptable Worksurfaces — Wood

Corner, 90° Wrap-Around Transitional Extended

Length

Width

24"

18"

Features • Includes worksurface and tie plate. • Wood veneer worksurface with: • –3mm edgeband (K) on user edge and 1mm edgeband on sides and back, or • –Cascade (M) on user edge and 1mm edgeband on sides and back. • Worksurfaces predrilled to accept most support options. • Optional wireway will be Charcoal. Refer to Specification Guide for wireway details. • Installed worksurfaces without wireway will not allow clearance for power plug. • Depths and widths shown in nominal dimensions.

Wood Edgeband or Cascade Wood Edge 1) Product number. 2) Wood finish color.

1 Edge Options: K Wood Edgeband M Wood Cascade

2 Core Options: S

Standard

G Green, add $94 list.

(Right-hand orientation) WUCX-WR34

Specification Tips

Length

Width

24"

18"

(Left-hand orientation) WUCX-WL43

• Rear corner bracket is required and must be separately specified. • Worksurface support specific to product line; must be separately specified. • –Rear corner bracket - REQUIRED • –Cantilever bracket • –Worksurface support panel • –Worksurface support column or leg • –Side brackets • –Attached lower storage • Recommend the AKPM-23 or AKPS-5 keyboard pad for 36′′(914mm)-wide corners. • Intermediate support is required for unsupported worksurface span greater than 60′′(1524mm). Note: Separately specified worksurface reinforcement channels provide additional support for worksurfaces with 50′′(1270mm) spans that are heavily loaded and not otherwise supported by mid-span cantilevers, worksurface support panels, columns, legs or attached lower storage.

234

To Order, Specify:

April 2008 / USA

Class CA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

3 Wireway Options: A Notched B Curved C Without

4 Orientation (as seated): R Right-hand L

Left-hand

UniGroup Too Price List

Adaptable Worksurfaces — Wood Left/Right Depth Width Corner, 90° Wrap-Around Transitional Extended

18′′(457mm) /24′′(66mm)

36′′(914mm)

Length

Wood Number

(K) Wood Edgeband Group I

1 2 3 4

(K) Wood Edgeband Group II

(M) Wood Cascade Group I

(M) Wood Cascade Group II

42′′(1067mm) WUCX-3642-W

34 $ 962

$1011

$1253

$1302

48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 66′′(1676mm) 72′′(1829mm) 42′′(1067mm)

WUCX-3648-W WUCX-3654-W WUCX-3660-W WUCX-3666-W WUCX-3672-W WUCX-3642-W

34 991 34 1083 34 1178 34 1292 34 1403 43 $ 962

1041 1138 1237 1357 1473 $1011

1282 1374 1469 1583 1694 $1253

1332 1429 1528 1648 1764 $1302

48′′(1219mm) WUCX-3648-W 54′′(1372mm) WUCX-3654-W 60′′(1524mm) WUCX-3660-W 66′′(6764mm) WUCX-3666-W 72′′(1829mm) WUCX-3672-W 42′′(1067mm)(1) WUCX-3642-W

43 991 43 1083 43 1178 43 1292 43 1403 45 $ 972

1041 1138 1237 1357 1473 $1021

1282 1374 1469 1583 1694 N/A

1332 1429 1528 1648 1764 N/A

48′′(1219mm)(1) WUCX-3648-W 54′′(1372mm)(1) WUCX-3654-W 60′′(1524mm)(1) WUCX-3660-W 66′′(6764mm)(1) WUCX-3666-W 72′′(1829mm)(1) WUCX-3672-W 42′′(1067mm)(1) WUCX-3642-W

45 1001 45 1093 45 1188 45 1302 45 1413 54 $ 972

1051 1148 1247 1367 1483 $1021

N/A N/A N/A N/A N/A N/A

N/A N/A N/A N/A N/A N/A

48′′(1219mm)(1) WUCX-3648-W 54′′(1372mm)(1) WUCX-3654-W 60′′(1524mm)(1) WUCX-3660-W 66′′(1676mm)(1) WUCX-3666-W 72′′(1829mm)(1) WUCX-3672-W 18′′(457mm)/ 42′′(1067mm) 48′′(1219mm) WUCX-4248-W 24′′(610mm) 54′′(1372mm) WUCX-4254-W 60′′(1524mm) WUCX-4260-W 66′′(1676mm) WUCX-4266-W 72′′(1829mm) WUCX-4272-W 24′′(610mm)/ 42′′(1067mm) 48′′(1219mm) WUCX-4248-W 18′′(457mm) 54′′(1372mm) WUCX-4254-W 60′′(1524mm) WUCX-4260-W 66′′(1676mm) WUCX-4266-W 72′′(1829mm) WUCX-4272-W 24′′(610mm)/ 42′′(1067mm) 48′′(1219mm) WUCX-4248-W 30′′(762mm) 54′′(1372mm) WUCX-4254-W 60′′(1524mm) WUCX-4260-W 66′′(1676mm) WUCX-4266-W 72′′(1829mm) WUCX-4272-W 30′′(762mm)/ 42′′(1067mm) 48′′(1067mm) WUCX-4248-W 24′′(610mm) 54′′(1372mm) WUCX-4254-W 60′′(1524mm) WUCX-4260-W 66′′(1676mm) WUCX-4266-W 72′′(1829mm) WUCX-4272-W 18′′(457mm)/ 48′′(1219mm) 54′′(1372mm) WUCX-4854-W 24′′(610mm) 60′′(1524mm) WUCX-4860-W 66′′(1676mm) WUCX-4866-W 72′′(1829mm) WUCX-4872-W 24′′(610mm)/ 48′′(1219mm) 54′′(1372mm) WUCX-4854-W 18′′(457mm) 60′′(1524mm) WUCX-4860-W 66′′(1676mm) WUCX-4866-W 72′′(1829mm) WUCX-4872-W 24′′(610mm)/ 48′′(1219mm) 54′′(1372mm) WUCX-4854-W 30′′(762mm) 60′′(1524mm) WUCX-4860-W 66′′(1676mm) WUCX-4866-W 72′′(1829mm) WUCX-4872-W 30′′(762mm)/ 48′′(1219mm) 54′′(1372mm) WUCX-4854-W 24′′(610mm) 60′′(1524mm) WUCX-4860-W 66′′(1676mm) WUCX-4866-W 72′′(1829mm) WUCX-4872-W

54 1001 54 1093 54 1188 54 1302 54 1413 34 $1051

1051 1148 1247 1367 1483 $1101

N/A N/A N/A N/A N/A $1342

N/A N/A N/A N/A N/A $1392

34 1103 34 1198 34 1315 34 1402 43 $1051

1158 1258 1380 1514 $1101

1394 1489 1606 1742 $1342

1449 1549 1671 1854 $1392

43 1103 43 1198 43 1315 43 1402 45 $1070

1158 1258 1380 1514 $1120

1394 1489 1606 1742 $1361

1449 1549 1671 1854 $1411

45 1122 45 1217 45 1334 45 1421 54 $1070

1177 1277 1399 1533 $1120

1413 1508 1625 1761 $1361

1468 1568 1690 1873 $1411

54 1122 54 1217 54 1334 54 1421 34 $1125

1177 1277 1399 1533 $1186

1413 1508 1625 1761 $1416

1468 1568 1690 1873 $1477

34 1220 34 1336 34 1453 43 $1125

1281 1403 1525 $1186

1511 1627 1744 $1416

1572 1694 1816 $1477

43 1220 43 1336 43 1453 45 $1144

1281 1403 1525 $1205

1511 1627 1744 $1435

1572 1694 1816 $1496

45 1239 45 1355 45 1472 54 $1144

1300 1422 1544 $1205

1530 1646 1763 $1435

1591 1713 1835 $1496

1300 1422 1544

1530 1646 1763

1591 1713 1835

24′′(610mm)/ 36′′(914mm) 18′′(457mm)

24′′(610mm)/ 36′′(914mm) 30′′(762mm)

30′′(762mm)/ 36′′(914mm) 24′′(610mm)

54 54 54

1239 1355 1472

(1)

Cascade edge option not available in these sizes.

Class CA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

235

UniGroup Too Price List

Adaptable Worksurfaces — Wood Left/Right Depth 90° Merger

18′′(457mm)

24′′(610mm)

30′′(762mm) 24"

Width

Wood Number

36′′(914mm) 42′′(1067mm) 48′′(1219mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm)

WUCQ-3636-WK WUCQ-4242-WK WUCQ-4848-WK WUCQ-3636-WK WUCQ-4242-WK WUCQ-4848-WK WUCQ-3636-WK WUCQ-4242-WK WUCQ-4848-WK

1 2

Features 24"

WUCQ-WN44

• 90° Merger is suggested alternative to using two perpendicular rectangular worksurfaces. • Rear corner bracket is required and must be separately specified. • Worksurface support specific to product line; must be separately specified. • –Rear corner bracket - REQUIRED • –Cantilever bracket • –Worksurface support panel • –Side brackets • Not designed for use with adjustable keyboard pads. • Due to manufacturing restrictions, not available with wood Cascade edge.

April 2008 / USA

(K) Wood Edgeband Group II

$606 677 810 $620 691 824 $692 763 896

$627 700 837 $641 714 851 $713 786 923

To Order, Specify:

• Includes worksurface and tie plate. • Wood veneer surface with: • –3mm edgeband (K) on user edge and 1mm edgeband on sides and back. • Worksurfaces predrilled to accept most support options. • Optional wireways along back edges are Charcoal. Refer to Specification Guide for wireway details. • Installed worksurfaces without wireway will not allow clearance for power plug. • Depths and widths shown in nominal dimensions.

Specification Tips

236

N33 N33 N33 N44 N44 N44 N55 N55 N55

(K) Wood Edgeband Group I

Class CA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

Wood Edgeband 1) Product number. 2) Wood finish color. 3) Edge trim color.

1 Core Options: S

Standard

G Green, add $94 list.

2 Wireway Options: A Notched B Curved C Without

UniGroup Too Price List

Adaptable Worksurfaces — Wood Left/Right Depth Corner, 120° Wrap-Around

18′′(457mm)

24′′(610mm)

24"

24"

30′′(762mm)

WUCZ-WN44

Width

Wood Number

36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm)

WUCZ-3636-WK WUCZ-4242-WK WUCZ-4848-WK WUCZ-5454-WK WUCZ-6060-WK WUCZ-3636-WK WUCZ-4242-WK WUCZ-4848-WK WUCZ-5454-WK WUCZ-6060-WK WUCZ-3636-WK WUCZ-4242-WK WUCZ-4848-WK WUCZ-5454-WK WUCZ-6060-WK

1 2

Features

N33 N33 N33 N33 N33 N44 N44 N44 N44 N44 N55 N55 N55 N55 N55

(K) Wood Edgeband Group I

(K) Wood Edgeband Group II

$ 855 938 1104 1181 1297 $ 875 968 1138 1219 1337 $ 973 1068 1254 1345 1477

$ 897 984 1158 1238 1360 $ 917 1014 1192 1276 1400 $1015 1114 1308 1402 1540

To Order, Specify:

• Includes worksurface and tie plate. • Wood veneer worksurface with: • –3mm edgeband (K) on user edge and 1mm edgeband on sides and back. • Worksurfaces predrilled to accept most support options. • Optional wireway will be Charcoal. Refer to Specification Guide for wireway details. • Installed worksurfaces without wireway will not allow clearance for power plug. • Depths and widths shown in nominal dimensions.

Specification Tips • Rear corner bracket is required and must be separately specified. • Worksurface support specific to product line; must be separately specified. • –Rear corner bracket - REQUIRED • –Cantilever bracket • –Worksurface support panel • –Side brackets • Recommend the AKPM-23 or AKPS-5 keyboard pad for 36′′(914mm)-wide corners. • Due to manufacturing restrictions, not available with wood Cascade edge.

Wood Edgeband 1) Product number. 2) Wood finish color.

1 Core Options: S

Standard

G Green, add $94 list.

2 Wireway Options: A Notched B Curved C Without

Note: Separately specified worksurface reinforcement channels provide additional support for worksurfaces with 50′′(1270mm) spans that are heavily loaded and not otherwise supported by mid-span cantilevers, worksurface support panels, columns, legs or attached lower storage.

Class CA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

237

UniGroup Too Price List

Adaptable Worksurfaces — Wood

D-Shaped Convergent

Width

Length

Wood Number

24′′(610mm)

36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 66′′(1676mm) 72′′(1829mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 66′′(1676mm) 72′′(1829mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 66′′(1676mm) 72′′(1829mm)

WURD-2436-W WURD-2442-W WURD-2448-W WURD-2454-W WURD-2460-W WURD-2466-W WURD-2472-W WURD-3036-W WURD-3042-W WURD-3048-W WURD-3054-W WURD-3060-W WURD-3066-W WURD-3072-W WURD-3636-W WURD-3642-W WURD-3648-W WURD-3654-W WURD-3660-W WURD-3666-W WURD-3672-W

30′′(762mm)

36′′(914mm)

1 2 3

(K) Wood Edgeband Group I

(K) Wood Edgeband Group II

(M) Wood Cascade Group I

(M) Wood Cascade Group II

$ 597 675 768 875 979 1098 1213 $ 618 697 794 903 1009 1130 1250 $ 637 719 818 930 1041 1163 1289

$ 627 709 807 919 1028 1153 1273 $ 649 732 834 948 1059 1186 1312 $ 669 755 859 977 1093 1221 1353

$ 747 843 960 1094 1224 1372 1516 $ 772 871 993 1128 1261 1413 1562 $ 796 899 1022 1163 1301 1454 1611

$ 777 877 999 1138 1273 1427 1576 $ 803 906 1033 1173 1311 1469 1624 $ 828 935 1063 1210 1353 1512 1675

Features

To Order, Specify:

• Includes worksurface and tie plate. • Wood veneer worksurface with: • –3mm edgeband (K) on user edge and 1mm edgeband on back (width), or • –Cascade (M) on user edge and 1mm edgeband on back (width). • Worksurfaces predrilled to accept most support options. • Optional wireway will be Charcoal. Refer to Specification Guide for wireway details. • Installed worksurfaces without wireway will not allow clearance for power plug. • Must be attached to a panel or face of a straight worksurface. • Depths and widths shown in nominal dimensions.

WURD-W

Wood Edgeband or Cascade Wood Edge 1) Product number. 2) Wood finish color.

1 Edge Options: K Wood Edgeband M Wood Cascade

2 Core Options: S

Standard

G Green, add $94 list.

Specification Tips • Worksurface support specific to product line; must be separately specified. • –Column support or leg • –Straight leg basic • –Attached lower storage • In addition to the required floor support, separately specify the appropriate support options. Select one or more of the following: • –Cantilever bracket • –Worksurface support panel • –Convergent mount bracket • –Flush mount plates • –Side bracket • For aesthetic reasons, when using Cascade edge option, consider specifying D-Shaped Convergent Wrap-Around. Note: Separately specified worksurface reinforcement channels provide additional support for worksurfaces with 50′′(1270mm) spans that are heavily loaded and not otherwise supported by mid-span cantilevers, worksurface support panels, columns, legs or attached lower storage.

238

April 2008 / USA

Class CA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

3 Wireway Options: A Notched B Curved C Without

UniGroup Too Price List

Adaptable Worksurfaces — Wood

Rectangular Convergent

Width

Length

Wood Number

24′′(610mm)

36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 66′′(1676mm) 72′′(1829mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 66′′(1676mm) 72′′(1829mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 66′′(1676mm) 72′′(1829mm)

WURV-2436-W WURV-2442-W WURV-2448-W WURV-2454-W WURV-2460-W WURV-2466-W WURV-2472-W WURV-3036-W WURV-3042-W WURV-3048-W WURV-3054-W WURV-3060-W WURV-3066-W WURV-3072-W WURV-3636-W WURV-3642-W WURV-3648-W WURV-3654-W WURV-3660-W WURV-3666-W WURV-3672-W

30′′(762mm)

36′′(914mm)

1 2 3

(K) Wood Edgeband Group I

(K) Wood Edgeband Group II

(M) Wood Cascade Group I

(M) Wood Cascade Group II

$ 597 613 631 696 761 851 934 $ 618 644 682 766 837 933 1028 $ 637 735 814 914 997 1109 1223

$ 627 639 663 731 799 894 981 $ 649 675 716 804 879 980 1079 $ 669 772 855 960 1047 1164 1286

$ 747 788 823 915 1006 1125 1237 $ 772 824 881 991 1089 1216 1340 $ 796 915 1018 1147 1257 1400 1571

$ 777 814 855 950 1044 1168 1284 $ 803 855 915 1029 1131 1263 1391 $ 828 952 1059 1193 1307 1455 1634

Features

WURV-W

To Order, Specify:

• Wood veneer worksurface: • –3mm edgeband (K) on user edges and 1mm edgeband on front and back (width), or • –Cascade (M) on user edges and 1mm edgeband on front and back (width). • Must be attached to a panel or face of a straight worksurface. • Worksurfaces predrilled to accept most support options. • Optional wireway will be Charcoal. Refer to Specification Guide for wireway details. • Installed worksurfaces without wireway will not allow clearance for power plug. • Depths and widths shown in nominal dimensions.

Wood Edgeband or Cascade Wood Edge 1) Product number. 2) Wood finish color.

1 Edge Options: K Wood Edgeband M Wood Cascade

2 Core Options: S

Standard

G Green, add $94 list.

Specification Tips • Worksurface support specific to product line; must be separately specified. • –Column support or leg • –Straight leg basic • –Attached lower storage • In addition to the required floor support, separately specify the appropriate support options. Select one or more of the following: • –Cantilever bracket • –Worksurface support panel • –Convergent mount bracket • –Flush mount plates • For aesthetic reasons, when using Cascade edge or edgeband edge option, consider specifying D-Shaped Convergent Wrap-Around.

3 Wireway Options: A Notched B Curved C Without

Note: Separately specified worksurface reinforcement channels provide additional support for worksurfaces with 50′′(1270mm) spans that are heavily loaded and not otherwise supported by mid-span cantilevers, worksurface support panels, columns, legs or attached lower storage.

Class CA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

239

UniGroup Too Price List

Adaptable Worksurfaces — Wood Depth D-Shaped Convergent, Wrap-Around

Width

18′′(457mm) 36′′(914mm)

24′′(610mm) 36′′(914mm)

30′′(762mm) 36′′(914mm)

18′′(457mm) 42′′(1067mm)

24′′(610mm) 42′′(1067mm)

30′′(762mm) 42′′(1067mm) (Right-hand orientation)

18′′(457mm) 48′′(1219mm)

24′′(610mm) 48′′(1219mm)

(Left-hand orientation)

30′′(762mm) 48′′(1219mm)

WUCD-W

Length

Wood Number

60′′(1524mm) 66′′(1676mm) 72′′(1829mm) 60′′(1524mm) 66′′(1676mm) 72′′(1829mm) 60′′(1524mm) 66′′(1676mm) 72′′(1829mm) 60′′(1524mm) 66′′(1676mm) 72′′(1829mm) 60′′(1524mm) 66′′(1676mm) 72′′(1829mm) 60′′(1524mm) 66′′(1676mm) 72′′(1829mm) 60′′(1524mm) 66′′(1676mm) 72′′(1829mm) 60′′(1524mm) 66′′(1676mm) 72′′(1829mm) 60′′(1524mm) 66′′(1676mm) 72′′(1829mm)

WUCD-3660-W WUCD-3666-W WUCD-3672-W WUCD-3660-W WUCD-3666-W WUCD-3672-W WUCD-3660-W WUCD-3666-W WUCD-3672-W WUCD-4260-W WUCD-4266-W WUCD-4272-W WUCD-4260-W WUCD-4266-W WUCD-4272-W WUCD-4260-W WUCD-4266-W WUCD-4272-W WUCD-4860-W WUCD-4866-W WUCD-4872-W WUCD-4860-W WUCD-4866-W WUCD-4872-W WUCD-4860-W WUCD-4866-W WUCD-4872-W

1 2 3 4 3 3 3 4 4 4 5 5 5 3 3 3 4 4 4 5 5 5 3 3 3 4 4 4 5 5 5

Features

Specification Tips • Worksurface support specific to product line; must be separately specified. • –Worksurface column support or leg • –Attached lower storage • In addition to the required floor support, separately specify the appropriate support options. Select one or more of the following: • –Cantilever bracket • –Worksurface support panel • –Convergent mount bracket Note: Separately specified worksurface reinforcement channels provide additional support for worksurfaces with 50′′(1270mm) spans that are heavily loaded and not otherwise supported by mid-span cantilevers, worksurface support panels, columns, legs or attached lower storage.

April 2008 / USA

(K) Wood Edgeband Group II

(M) Wood Cascade Group I

(M) Wood Cascade Group II

$1145 1213 1276 $1174 1242 1305 $1202 1270 1333 $1174 1243 1309 $1203 1272 1338 $1231 1300 1366 $1207 1274 1342 $1236 1303 1371 $1264 1331 1399

$1205 1276 1342 $1234 1305 1371 $1262 1333 1399 $1235 1308 1377 $1264 1337 1406 $1292 1365 1434 $1270 1340 1412 $1299 1369 1441 $1327 1397 1469

$1445 1530 1610 $1474 1559 1639 $1502 1587 1667 $1482 1568 1651 $1511 1597 1680 $1539 1625 1708 $1523 1607 1692 $1552 1636 1721 $1580 1664 1749

$1505 1593 1676 $1534 1622 1705 $1562 1650 1733 $1543 1633 1719 $1572 1662 1748 $1600 1690 1776 $1586 1673 1762 $1615 1702 1791 $1643 1730 1819

To Order, Specify:

• Includes worksurface and tie plate. • Wood veneer worksurface: • –3mm edgeband (K) on user edge and 1mm edgeband on side and back (width), or • –Cascade (M) on user edge and 1mm edgeband on side and back (width). • Worksurfaces predrilled to accept most support options. • Optional wireway will be Charcoal. Refer to Specification Guide for wireway details. • Installed worksurfaces without wireway will not allow clearance for power plug. • 36′′(914mm)-wide surfaces have a 24′′(610mm) D-shaped diameter. • 42′′(1067mm)- to 60′′(1524mm)-wide surfaces have a 30′′(762mm) D-shaped diameter. • Depths and widths shown in nominal dimensions.

240

(K) Wood Edgeband Group I

Class CA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

Wood Edgeband or Cascade Wood Edge 1) Product number. 2) Wood finish color.

1 Edge Options: K Wood Edgeband M Wood Cascade

2 Core Options: S

Standard

G Green, add $94 list.

3 Wireway Options: A Notched B Curved C Without

4 Orientation (as seated): R Right-hand L

Left-hand

UniGroup Too Price List

Adaptable Worksurfaces — Wood

D-Shaped Ender

Depth

Length

Wood Number

18′′(457mm)

36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 66′′(1676mm) 72′′(1829mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 66′′(1676mm) 72′′(1829mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 66′′(1676mm) 72′′(1829mm)

WUDD-1836-W WUDD-1842-W WUDD-1848-W WUDD-1854-W WUDD-1860-W WUDD-1866-W WUDD-1872-W WUDD-2436-W WUDD-2442-W WUDD-2448-W WUDD-2454-W WUDD-2460-W WUDD-2466-W WUDD-2472-W WUDD-3036-W WUDD-3042-W WUDD-3048-W WUDD-3054-W WUDD-3060-W WUDD-3066-W WUDD-3072-W

24′′(610mm)

WUDD-W

30′′(762mm)

1 2 C C C C C C C C C C C C C C C C C C C C C

(K) Wood Edgeband Group I

(K) Wood Edgeband Group II

(M) Wood Cascade Group I

(M) Wood Cascade Group II

$ 581 656 746 850 950 1065 1178 $ 597 675 768 875 979 1098 1213 $ 618 697 794 903 1009 1130 1250

$ 611 689 784 893 998 1118 1237 $ 627 709 807 919 1028 1153 1273 $ 649 732 834 948 1059 1186 1312

$ 727 820 933 1062 1188 1331 1473 $ 747 843 960 1094 1224 1372 1516 $ 772 871 993 1128 1261 1413 1562

$ 757 853 971 1105 1236 1384 1532 $ 777 877 999 1138 1273 1427 1576 $ 803 906 1033 1173 1311 1469 1624

Features

To Order, Specify:

• Includes worksurface and tie plate. • Wood veneer worksurface with: • –3mm edgeband (K) on user edge and 1mm edgeband on back (width), or • –Cascade (M) on user edge and 1mm edgeband on back (width). • Worksurfaces predrilled to accept most support options. • Must be attached to the depth of adjoining worksurface. • Depths and widths shown in nominal dimensions.

Specification Tips • Worksurface support specific to product line; must be separately specified. • –Worksurface column support or leg • –Attached lower storage • In addition to the required floor support, separately specify the appropriate support options. Select one or more of the following: • –Standard link cantilever bracket • –Worksurface support panel • –Convergent mount bracket • –Flush mount plate • For aesthetic reasons, when using Cascade edge option, consider specifying D-Shaped Convergent Wrap-Around.

Wood Edgeband or Cascade Wood Edge 1) Product number. 2) Wood finish color.

1 Edge Options: K Wood Edgeband M Wood Cascade

2 Core Options: S

Standard

G Green, add $94 list.

Note: Separately specified worksurface reinforcement channels provide additional support for worksurfaces with 50′′(1270mm) spans that are heavily loaded and not otherwise supported by mid-span cantilevers, worksurface support panels, columns, legs or attached lower storage.

Class CA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

241

UniGroup Too Price List

Adaptable Worksurfaces — Wood Transitional Left/Right Depth Width Bent

Length Width

24" 30"

(Right-hand orientation) WUCB-WR45 Length Width

24" 30"

(Left-hand orientation) WUCB-WL54

Length

24′′(610mm)/ 24′′(610mm) 36′′(914mm) 30′′(762mm) 42′′(1067mm) 48′′(1219mm) 60′′(1524mm) 24′′(610mm)/ 30′′(762mm) 36′′(914mm) 30′′(762mm) 42′′(1067mm) 48′′(1219mm) 60′′(1524mm) 30′′(762mm)/ 24′′(610mm) 36′′(914mm) 24′′(610mm) 42′′(1067mm) 48′′(1219mm) 60′′(1524mm) 30′′(762mm)/ 30′′(762mm) 36′′(914mm) 24′′(610mm) 42′′(1067mm) 48′′(1219mm) 60′′(1524mm)

Wood Number

1 2 3

(M) Wood Cascade Group I

(M) Wood Cascade Group II

R45 $ 856

$ 885

$1070

$1099

WUCB-2442-W WUCB-2448-W WUCB-2460-W WUCB-3036-W

R45 939 R45 1106 R45 1301 R45 $1010

970 1143 1344 $1044

1174 1383 1627 $1263

1205 1420 1670 $1297

WUCB-3042-W WUCB-3048-W WUCB-3060-W WUCB-2436-W

R45 1108 R45 1304 R45 1397 L54 $ 856

1145 1347 1443 $ 885

1385 1630 1746 $1070

1422 1673 1792 $1099

WUCB-2442-W WUCB-2448-W WUCB-2460-W WUCB-3036-W

L54 L54 L54 L54

939 1106 1301 $1010

970 1143 1344 $1044

1174 1383 1627 $1263

1205 1420 1670 $1297

WUCB-3042-W WUCB-3048-W WUCB-3060-W

L54 L54 L54

1108 1304 1397

1145 1347 1443

1385 1630 1746

1422 1673 1792

Features

To Order, Specify:

• Includes worksurface and tie plate. • Wood veneer worksurface with: • –3mm edgeband (K) on user edge and 1mm edgeband on back (width), or • –Cascade (M) on user edge and 1mm edgeband on back (width). • Worksurfaces predrilled to accept most support options. • Optional wireway along back edge is Charcoal. Refer to Specification Guide for wireway details. • Installed worksurfaces without wireway will not allow clearance for power plug. • Depths and widths shown in nominal dimensions.

• Worksurface support specific to product line; must be separately specified. • –Convergent mount bracket - REQUIRED • –Cantilever bracket • –Worksurface support column or leg • –Flush mount plate Note: Separately specified worksurface reinforcement channels provide additional support for worksurfaces with 50′′(1270mm) spans that are heavily loaded and not otherwise supported by mid-span cantilevers, worksurface end panels, posts or attached lower storage.

April 2008 / USA

(K) Wood Edgeband Group II

WUCB-2436-W

Specification Tips

242

(K) Wood Edgeband Group I

Class CA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

Wood Edgeband or Cascade Wood Edge 1) Product number. 2) Wood finish color.

1 Edge Options: K Wood Edgeband M Wood Cascade

2 Core Options: S

Standard

G Green, add $94 list.

3 Wireway Options: A Notched B Curved C Without

UniGroup Too Price List

Adaptable Worksurfaces — Wood

Countertop

Depth

Width

Wood Number

12′′(305mm)

24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 66′′(1676mm) 72′′(1829mm) 78′′(1981mm) 84′′(2134mm) 90′′(2286mm) 96′′(2438mm) 102′′(2591mm) 108′′(2743mm) 114′′(2896mm) 120′′(3048mm)

WUTS-1224-W WUTS-1230-W WUTS-1236-W WUTS-1242-W WUTS-1248-W WUTS-1254-W WUTS-1260-W WUTS-1266-W WUTS-1272-W WUTS-1278-W WUTS-1284-W WUTS-1290-W WUTS-1296-W WUTS-12A2-W WUTS-12A8-W WUTS-12B4-W WUTS-12C0-W

WUTS-W

1 2 C C C C C C C C C C C C C C C C C

(K) Wood Edgeband Group I

(K) Wood Edgeband Group II

(M) Wood Cascade Group I

(M) Wood Cascade Group II

$430 461 494 522 574 577 579 602 620 651 681 709 739 761 783 802 820

$444 476 510 539 602 605 608 621 640 671 701 730 761 784 807 827 846

$ 538 576 617 653 726 729 731 753 775 814 852 888 925 953 981 1004 1034

$ 552 591 633 670 754 757 760 772 795 834 872 909 947 976 1005 1029 1060

Features

To Order, Specify:

• Includes countertop and tie plate. • Wood veneer surface with: • –3mm edgeband (K) on user edges and 1mm edgeband on ends, or • –Cascade (M) user edges and 1mm edgeband on ends. • Widths shown in nominal dimensions.

Specification Tips • Requires separately specified mounting hardware. • For installation on panels 42′′(1067mm)-high or higher. • For use in applications that match panel width or multiple panel widths.

Wood Edgeband or Cascade Wood Edge 1) Product number. 2) Wood finish color.

1 Edge Options: K Wood Edgeband M Wood Cascade

2 Core Options: S

Standard

G Green, add $94 list.

Class CA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

243

UniGroup Too Price List

Adaptable Worksurfaces — Wood

Conference End

Depth

Width

38′′(965mm) 50′′(1270mm) 62′′(1575mm)

30′′(762mm)

Wood Number

1 2 3

WUDC-3830-W WUDC-5030-W WUDC-6230-W

(K) Wood Edgeband Group I

(K) Wood Edgeband Group II

(M) Wood Cascade Group I

(M) Wood Cascade Group II

$1342 1424 1498

$1409 1495 1573

$1678 1780 1874

$1745 1851 1949

Features

38"

50"

To Order, Specify:

• Includes worksurface and tie plate. • Wood veneer worksurface with: • –3mm edgeband (K) on user edge and 1mm edgeband on back, or • –Cascade (M) user edge and 1mm edgeband on back. • Worksurfaces predrilled to accept most support options. • Optional wireway can be specified to accommodate panel end-of-run trim. • Optional wireway will be Charcoal. Refer to Specification Guide for wireway details. • Depths and widths shown in nominal dimensions.

Specification Tips

30"

WUDC-3830-W

WUDC-5030-W

62" 30"

WUDC-6230-W

• Designed to be mounted on UniGroup Too, UniGroup and PLACES. • Worksurface support specific to product line; must be separately specified. • –Support column or leg • –Worksurface support panel • –Standard link cantilever bracket. • –In addition to a column support or leg, two flush mount plates are required and must be separately specified. • If using end-of-run finish post specify notched or curved wireway option. Note: Grain direction will run across 62′′(1575mm)-wide conference end worksurface.

244

April 2008 / USA

Class CA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

Wood Edgeband or Cascade Wood Edge 1) Product number. 2) Wood finish color.

1 Edge Options: K Wood Edgeband M Wood Cascade

2 Core Options: S

Standard

G Green, add $94 list.

3 Wireway Options: A Notched B Curved C Without

UniGroup Too Price List

Adaptable Worksurfaces — Wood

Key Conference End

Depth

Width

Wood Number

38′′(965mm) 50′′(1270mm)

30′′(762mm) 30′′(762mm) 36′′(914mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm)

WURY-3830-W WURY-5030-W WURY-5036-W WURY-6236-W WURY-6242-W WURY-6248-W

62′′(1575mm)

1 2 3

(K) Wood Edgeband Group I

(K) Wood Edgeband Group II

(M) Wood Cascade Group I

(M) Wood Cascade Group II

$1718 $1730 1752 $1725 1777 1854

$1805 $1818 1841 $1812 1867 1948

$2153 $2389 $2420 $2374 $2454 $2561

$2240 $2477 $2509 $2461 $2544 $2655

Features

To Order, Specify:

• Includes worksurface and tie plate. • Wood veneer worksurface with: • –3mm edgeband (K) on user edge and 1mm edgeband on back, or • –Cascade (M) user edge and 1mm edgeband on back. • Worksurfaces predrilled to accept most support options. • Wireway along back edge is Charcoal. Refer to Specification Guide for wireway details. • Depths and widths shown in nominal dimensions. • Wireway required to accommodate end of run trim.

38" Depth

Specification Tips 30"

WURY-3830-W

50" Depth

Width 30" 36"

• Designed to be mounted on UniGroup Too, UniGroup and PLACES. • Worksurface support specific to product line; must be separately specified. • –Support column or leg • –Worksurface support panel • –Standard link cantilever bracket. • –In addition to a column support or leg, two flush mount plates are required and must be separately specified. • If using end-of-run finish post specify notched or curved wireway option.

Wood Edgeband or Cascade Wood Edge 1) Product number. 2) Wood finish color.

1 Edge Options: K Wood Edgeband M Wood Cascade

2 Core Options: S

Standard

G Green, add $94 list.

3 Wireway Options: A Notched B Curved C Without

Note: Grain direction will run across 62′′(1575mm)-wide conference end worksurface.

WURY-5030-W WURY-5036-W

62" Depth

Width

36" 42" 48"

WURY-6236-W WURY-6242-W WURY-6248-W

Class CA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

245

UniGroup Too Price List

Adaptable Worksurfaces — Wood

120° Link

Depth

Wood Number

18′′(457mm) 24′′(610mm) 30′′(762mm)

WUDZ-1820-WK WUDZ-2426-WK WUDZ-3032-WK

1 C C C

Features

Specification Tips

246

• Designed to be mounted on UniGroup Too, UniGroup and PLACES. • Support column, leg or worksurface support panel may be used dependent upon application. • Use with Corner, 120° Wrap-Around worksurfaces. • Worksurface support specific to product line; must be separately specified. • –Standard link cantilever bracket • –Tie plates with18′′(457mm) depth • –Flush mount plates with 24′′(610mm)-30′′(762mm) depth • Due to manufacturing restrictions, not available with wood Cascade edge.

April 2008 / USA

(K) Wood Edgeband Group II

$ 651 735 1009

$ 684 772 1059

To Order, Specify:

• Includes worksurface and tie plate. • Wood veneer worksurface with: • –3mm edgeband (K) on user edge and 1mm edgeband on sides and back, or • –Cascade (M) user edge and 1mm edgeband on back. • Worksurfaces predrilled to accept most support options. • Depths and widths shown in nominal dimensions.

WUDZ-W

(K) Wood Edgeband Group I

Class CA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

Wood Edgeband 1) Product number. 2) Wood finish color.

1 Core Options: S

Standard

G Green, add $94 list.

UniGroup Too Price List

Worksurface Supports for use with UniGroup Too, UniGroup & PLACES

Standard Cantilever Bracket

ZEBD-1600 (Right-hand shown)

Height

Width

Depth

Description

Number

Price

9′′(229mm)

1 5/8′′(41mm)

16 1/2′′(419mm)

Pair Left-hand Right-hand

ZEBD-1600-PP ZEBD-1600-PL ZEBD-1600-PR

$77 41 41

Features

To Order, Specify:

• Includes one right- and/or one left-handed bracket and mounting screws. • Provides cantilever support for the left and/or right side of worksurface. • Installs in panel side trim rail. • Cantilever bracket can be used on either a 18′′(457mm)-, 24′′(610mm)- or 30′′(762mm)-deep worksurface. • Mounts worksurface in one inch vertical increments from a minimum of 15′′(381mm) high. • Provides clear access leg swing when supporting 24′′(610mm)- and 30′′(762mm)-deep worksurfaces at standard 29′′(737mm) height. • Standard in Charcoal finish only.

1) Product number. (No finish specification required.)

Available on RUSH.

Standard Mini Cantilever Bracket

ZEBD-1000 (Right-hand shown)

9′′(229mm)

1 5/8′′(41mm)

10 1/2′′(267mm)

Pair Left-hand Right-hand

ZEBD-1000-PP ZEBD-1000-PL ZEBD-1000-PR

$102 53 53

Features

To Order, Specify:

• Includes one right- and/or one left-handed bracket and mounting screws. • Provides cantilever support for the left or right side of worksurface. • Installs in panel side trim rail. • Cantilever bracket to be used on 18′′(457mm)- deep rectangular radius end worksurface with T-mold or edgeband. • Mounts worksurface in one inch vertical increments from a minimum of 15′′(381mm) high. • Standard in Charcoal finish only.

1) Product number. (No finish specification required.)

Available on RUSH.

Standard Link Cantilever Bracket

ZEBL-1600

9′′(229mm)

3 3/4′′(95mm)

16 1/2′′(419mm)

Pair Left-hand Right-hand

ZEBL-1600-PP ZEBL-1600-PL ZEBL-1600-PR

$102 53 53

Features

To Order, Specify:

• Includes one right- and/or one left-handed bracket, with attached angle bracket and mounting screws. • Provides cantilever support for the left or right side of conference end, key conference end and 120° link and the adjoining worksurface. • Installs in panel side trim rail. • Cantilever bracket can be used on either a 18′′(457mm)-, 24′′(610mm)- or 30′′(762mm)-deep worksurface. • Mounts worksurface in one inch vertical increments from a minimum of 15′′(381mm) high. • Provides clear access leg swing when supporting 24′′(610mm)- and 30′′(762mm)-deep worksurfaces at standard 29′′(737mm) height. • Standard in Charcoal finish only.

1) Product number. (No finish specification required.)

Available on RUSH. Left

Right

Specification Tip • To be used with conference end, key conference end, D-shape ender and 120° link only.

Class CA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

247

UniGroup Too Price List

Worksurface Supports for use with UniGroup Too, UniGroup & PLACES

Standard Snap-n-Fit Cantilever Bracket for Rectangular Worksurfaces

ZEBS-1900

Height

Depth

Description

Number

Price

10 1/2′′(267mm)

19′′(483mm)

Pair Left-hand Right-hand

ZEBS-1900-PP ZEBS-1900-PL ZEBS-1900-PR

$100 51 51

Features

To Order, Specify:

• Includes one right- and/or one left-handed bracket, U-channel and mounting screws. • Provides cantilever support for the left and/or right side of worksurface. • Installs in panel side trim rail. • Mounts worksurface in one inch vertical increments from a minimum of 15′′(381mm) high. • Provides clear access leg swing when supporting 24′′(610mm)- and 30′′(762mm)-deep worksurfaces at standard 29′′(737mm) height.

1) Product number. 2) Non-metallic trim color.

Available on RUSH.

Specification Tips • Worksurfaces are predrilled for snap-n-fit cantilevers. • Cantilever bracket can be used on either a 24′′(610mm)- or 30′′(762mm)-deep worksurface. • Cannot be used on 18′′(457mm)-deep worksurfaces.

Standard Snap-n-Fit Mini Cantilever Bracket

ZEBS-1200

10 1/2′′(267mm)

12′′(305mm)

Pair Left-hand Right-hand

Features

To Order, Specify:

• Includes one right- and/or one left-handed bracket, U-channel and mounting screws. • Provides cantilever support for the left or right side of worksurface. • Installs in panel side trim rail. • Mounts worksurface in one inch vertical increments from a minimum of 15′′(381mm) high.

1) Product number.

Available on RUSH.

Specification Tips • Worksurfaces are predrilled for snap-n-fit cantilevers. • Cantilever bracket can be used on 18′′(457mm)-deep rectangular worksurfaces, 18′′(457mm) to 24′′(610mm)-deep rectangular radius end, 24′′(610mm) to 30′′(762mm)-deep corner 90° split top and rectangular split top worksurfaces.

248

April 2008 / USA

ZEBS-1200-PP ZEBS-1200-PL ZEBS-1200-PR

Class CA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

2) Non-metallic trim color.

$100 51 51

UniGroup Too Price List

Worksurface Supports for use with UniGroup Too, UniGroup & PLACES

Standard Snap-n-Fit Cantilever Bracket for Corner Worksurface

Depth

Height

Description

Number

Price

19′′(483mm)

10 1/2′′(267mm)

Pair

ZEBC-1900-PP

$100

Feature

To Order, Specify:

• Includes one right and one left-hand cantilever, two U-channels (1 corner, 1 rectangular) and mounting screws.

1) Product number.

Available on RUSH.

2) Non-metallic trim color.

Specification Tips ZEBC-1900

• Worksurfaces are predrilled for snap-n-fit cantilevers. • To be used with 24′′(610mm)-deep or 30′′(762mm)-deep 90° and 120° corner and extended worksurfaces. • Exception: Not to be used with 24′′(610mm)-deep, 90° split top corner worksurface or 24′′(610mm)-deep rectangular split top worksurface.

Standard Snap-n-Fit Mini Cantilever Bracket for Corner Worksurface

12′′(267mm)

10 1/2′′(267mm)

Pair

ZEBC-1200-PP

Feature

To Order, Specify:

• Includes one right and one left-hand cantilever, two U-channels (1 corner, 1 rectangular) and mounting screws.

1) Product number.

Available on RUSH.

$100

2) Non-metallic trim color.

Specification Tips • Worksurfaces are predrilled for snap-n-fit cantilevers. • To be used with 18′′(457mm)-deep 90° and 120° corner and extended worksurfaces. • To be used with 24′′(610mm)-deep 90° split top corner worksurfaces.

ZEBC-1200

Class CA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

249

UniGroup Too Price List

Worksurface Supports for use with UniGroup Too, UniGroup & PLACES

Side Bracket

ZEBA-0000 (Right-hand)

(Left-hand)

Depth

Width

Height

Description

Number

Price

1 1/2′′(38mm)

2 5/8′′(67mm)

2′′(51mm)

Left Right

ZEBA-0000-PL ZEBA-0000-PR

$14 14

Features

To Order, Specify:

• • • •

1) Product number. (No finish specification required.)

Includes one left- or right-hand bracket and mounting screws. Mounts ends of rectilinear worksurface to adjacent panel. Worksurface depth and return panel width must be equal. Standard in Charcoal finish only. Available on RUSH.

Specification Tip • Not recommended for use with convergent worksurface.

Convergent Mount Bracket

ZEBV-0000 (Right-hand)

Flush Mount Plate

ZUBF-0000

1 7/8′′(48mm)

4 1/4′′(108mm)

4 3/4′′(121mm)

Left Right

ZEBV-0000-PL ZEBV-0000-PR

Features

To Order, Specify:

• Includes one left- or right-hand bracket, mounting screws and anti-dislodgement clip. • Mounts one corner of straight end of convergent worksurface to panel side rails. • Standard in Charcoal finish only.

1) Product number. (No finish specification required.)

$19 19

Available on RUSH.

3′′(76mm)

4′′(102mm)

ZUBF-0000-PN

Features

To Order, Specify:

• Includes one bracket and mounting screws. • Mounts straight end of convergent worksurfaces or conference end worksurfaces to panel-hung worksurfaces. • Provides 90° attachment of two worksurfaces at the same height. • Standard in Charcoal finish only.

1) Product number. (No finish specification required.)

$19

Available on RUSH.

Rear-Corner Bracket

ZEBR-0000

1 1/2′′(38mm)

2 5/8′′(67mm)

2′′(51mm)

ZEBR-0000-PN

Features

To Order, Specify:

• Includes one left-hand bracket and mounting screws. • Attaches rear corner of worksurface to left hand side trim rail of panel. • Standard in Charcoal finish only.

1) Product number. (No finish specification required.)

$14

Available on RUSH.

Specification Tip • Required for all corner worksurfaces.

Counter Top Brackets

Z2BT-0000 ZEBT-0000 ZHBT-0000

Description

Number

Price

UniGroup Too for Square Painted Top Cap UniGroup for Radius Steel Top Cap PLACES for Low Profile Steel/Wood Top Cap

Z2BT-0000-PNE ZEBT-0000-PNE ZHBT-0000-PNE

$30 30 30

Feature

To Order, Specify:

• Includes countertop brackets and screws to support countertops up to 60′′(1524mm) wide. For wider widths order additional brackets as needed so that brackets are positioned a maximum of 60′′(1524mm) apart.

1) Product number.

Specification Tips • For UniGroup radius wood top cap, specify UniGroup for radius steel top cap and add field supplied spacers to accommodate height difference. • Unigroup Too for square painted top cap brackets are available in Metallic finish.

250

April 2008 / USA

Class CA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

2) Trim color.

UniGroup Too Price List

Adaptable Worksurface Supports for use with UniGroup Too, UniGroup & PLACES

Pedestal-to-Panel Bracket

Height

Depth

Description

Number

Price

2′′(51mm)

27 1/4′′(692mm)

Laminate Edgeband, Left-hand Laminate Edgeband, Right-hand Laminate Cascade, Left-hand Laminate Cascade, Right-hand

ZEBN-0000-PLJ ZEBN-0000-PRJ ZEBN-0000-PLV ZEBN-0000-PRV

$141 141 $141 141

Features

To Order, Specify:

• Includes one handed bracket and mounting screws. • Installs in side trim rail slots and attaches to the back side of an attached pedestal. • Bracket is predrilled for attachment to pedestal.

1) Product number. 2) Trim color. $8 upcharge (list) for Metallic trim color.

Available on RUSH.

Specification Tips

ZEBN-0000

• Worksurface and pedestal have to be same depth (nominal). • Not for use with T-mold edge worksurface. • Not for use with lateral files.

Worksurface Support Panel — Laminate

ZEFS-LNE T-Mold

Edgeband

Cascade

Worksurface Height

Thickness

Depth

Number

27 7/8′′(708mm)

1 1/2′′(38mm)

12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm)

ZEFS-1200-LNE ZEFS-1800-LNE ZEFS-2400-LNE ZEFS-3000-LNE

Features

To Order, Specify:

• Includes support panel with glides and hardware. • Installs in panel side trim rails and attaches under the end of a worksurface. • Provides full support for one end of equal depth worksurfaces. • Recommended in heavy loading conditions to eliminate front end deflection or to replace return panel. • Non-handed design may be installed in left-hand, right-hand or shared configuration, and enhances reconfiguration possibilities. • High-pressure laminate surfaces with plastic edge trim, 3mm radiused user edge provides soft access to knee space. • Adjustable glides provide a maximum of 2′′(51mm) of height adjustment.

1) Product number.

1

Price $246 262 281 301

2) Trim color.

1 Edge Options: T

T-Mold

J

Edgeband

V

Cascade

Available on RUSH.

Specification Tips • Specify worksurface support panel to match worksurface edge option. • Actual depth varies depending on worksurface edge option.

Worksurface Support Panel — Wood

ZEFS-WNE Edgeband

Cascade

27 7/8′′(708mm)

1 1/2′′(38mm)

12′′(305mm) 18′′(457mm) 24′′(610mm) 30′′(762mm)

ZEFS-1200-WNE ZEFS-1800-WNE ZEFS-2400-WNE ZEFS-3000-WNE

Features

To Order, Specify:

• Includes support panel with glides and hardware. • Installs in panel side trim rails and attaches under the end of a worksurface. • Provides full support for one end of equal depth worksurfaces. • Recommended in heavy loading conditions to eliminate front end deflection or to replace return panel. • Non-handed design may be installed in left-hand, right-hand or shared configuration, and enhances reconfiguration possibilities. • Wood surface with wood edge trim. • Adjustable glides provide a maximum of 2′′(51mm) of height adjustment.

1) Product number.

$438 454 468 517

2) Wood finish color.

1 Edge Options: K Wood Edgeband M Wood Cascade

Available on RUSH.

Specification Tips • Specify worksurface support panel to match worksurface edge option. • Actual depth varies depending on worksurface edge option. Class CA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

251

UniGroup Too Price List

Worksurface Supports for use with UniGroup Too, UniGroup & PLACES

Straight Leg Basic

WUCL-0001

Class CA

Number

Price

WUCL-0001

$101

Features

To Order, Specify:

• Includes one leg and mounting screws. • 4′′(102mm) glide adjustment range allows worksurface heights from 27′′(686mm) to 31′′(787mm). • 2 1/4′′(57mm) diameter column includes 6′′(152mm)-diameter top plate. • Standard in Charcoal finish only. • Shipped assembled.

1) Product number. (No finish specification required.)

Available on RUSH.

Specification Tip • Predrilled for convergent worksurfaces and end-of-run worksurface application.

Straight Leg Basic with Caster

NCL

Class FA

Description

Number

Price

Leg with locking caster Leg with non-locking caster

NCL-1-CL NCL-1-C

$112 112

Features

To Order, Specify:

• Includes one leg and mounting hardware. • 4′′(102mm) caster adjustment range allows worksurface heights from 27′′(686mm) to 31 1/2′′(800mm). • 2 1/4′′(57mm) diameter column includes 6′′(152mm) diameter top plate and mounting hardware. • Standard in Charcoal finish only. • Shipped assembled.

1) Product number. (No finish specification required).

Available on RUSH.

Specification Tips • Straight leg should be installed in predrilled worksurfaces. • Freestanding applications require specifying two locking and two non-locking casters or four glides.

Support Column

WUCC-0004

Features

To Order, Specify:

• Includes one column and mounting screws. • Column adjusts vertically for worksurface heights from 26′′(660mm) to 30′′(762mm). • 3′′(76mm)-diameter column includes 6′′(152mm)- square top plate.

1) Product number.

$227

2) Trim color. $12 upcharge (list) for Metallic trim color.

Available on RUSH.

WUCC-0004

Class CA

Adjustable Height Disc Base

Diameter 21′′(533mm)

ZZFZ-2121-PNF

Class CA

April 2008 / USA

Price

ZZFZ-2121-PNF

$560

Features

To Order, Specify:

• Includes base, column and mounting screws. • For use in panel mounted applications only.

1) Product number.

Available on RUSH.

Specification Tips • Do not use as freestanding table base. • 5′′ adjustment range allows worksurface heights of 27′′(686mm) to 32′′(813mm).

252

Number

SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

2) Trim color. $12 upcharge (list) for Metallic trim color.

UniGroup Too Price List

Worksurface Accessories for use with UniGroup Too, UniGroup & PLACES

Double Support Leg

Height (Adjustable)

Depth

Number

Price

27′′(686mm)

18′′(457mm) 24′′(610mm) 30′′(762mm)

ZZFK-1800-PNFG ZZFK-2400-PNFG ZZFK-3000-PNFG

$403 426 451

Features

To Order, Specify:

• Includes one double leg and mounting hardware. • Leg may be installed in left-hand or right-hand configuration. • 6′′ adjustment range allows worksurface heights from 26′′(660mm) to 32′′(813mm). • Provides full support for one end of equal depth worksurface.

1) Product number. 2) Trim color. $12 Upcharge (list) for Metallic trim color.

Specification Tips ZZFK

• One end of worksurface must be panel attached, not to be used as freestanding. • Double leg with glide can be used to replace support post or support column.

Class CA

Dual-Leg Base

HCC-0002

Number

Price

27 3/4′′(705mm)

HCC-0002

$348

Features

To Order, Specify:

• Includes fixed-height tubular legs and framing members with sheet steel curved end panel. • May be used in conjunction with modesty panel, see below. • Adjusts vertically up to 1 1/4′′(32mm).

1) Product number. 2) Non-metallic trim color.

Class BA

Modesty Panel

HM

Height

Class BA

Single Support Leg

Height

Width

Description

Number

Price

9 1/4′′(235mm)

28′′(711mm) 40′′(1016mm) 52′′(1321mm) 40′′(1016mm) 52′′(1321mm)

For 48′′(1219mm) x 30′′(762mm) surface For 60′′(1524mm) x 30′′(762mm) surface For 72′′(1829mm) x 30′′(762mm) surface For 60′′(1524mm) x 36′′(914mm) surface For 72′′(1829mm) x 36′′(914mm) surface

HM-4830 HM-6030 HM-7230 HM-6036 HM-7236

$162 203 254 203 254

Features

To Order, Specify:

• Includes attachment hardware. • For use only with Dual-Leg Base, see above. • Recommended only for panel mounted convergent worksurfaces. • Mountable on left- or right-side under convergent worksurface.

1) Product number. 2) Non-metallic trim color.

Height

Width

Depth

Description

Number

Price

28′′(711mm)

1 1/8′′(29mm)

3 1/4′′(83mm)

Single Post with Glide

ZUFJ-0101-PNFG

$162

Features

To Order, Specify:

• Includes one single post and mounting hardware. • Glide provides 1/2′′ of height adjustment.

1) Product number.

Specification Tip

2) Trim color. $12 upcharge (list) for Metallic trim color.

• May be used for worksurface applications. • One end of worksurface must be panel attached, not to be used as freestanding. ZUFJ-0101-PNFG

Support Post

Class CA

Height (Adjustable)

Description

Number

Price

26′′(660mm)/30′′(762mm)

Single post with glide, adjustable Single post with caster, adjustable

ZZFJ-0101-PNFG ZZFJ-0101-PNFC

$215 215

Features

To Order, Specify:

• Includes one single post and mounting hardware. • 6′′ height adjustment (26′′(660mm)-32′′(813mm)).

1) Product number.

Specification Tip

2) Trim color. $12 Upcharge (list) for Metallic trim color.

• May be used for worksurface and freestanding table applications. ZZFJ

Class CA SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

253

UniGroup Too Price List

Worksurface Accessories for use with UniGroup Too, UniGroup & PLACES

Horizontal Wire Manager

WUAW-1500-PNH

Class CA

Wire Management Loop

HNEH-8

Class BA

Depth

Width

Height

Number

Price

2′′(51mm)

15′′(381mm)

3′′(76mm)

WUAW-1500-PNH

$128

Features

To Order, Specify:

• Includes a set of ten, plastic wire managers and mounting screws. • Manages and stores wire and cables under worksurfaces. • Standard in Charcoal trim.

1) Product number. (No finish specification required.)

Available on RUSH.

Installed Height

Width

Number

Price

4 1/2′′(114mm)

2 3/4′′(70mm)

HNEH-8

$28

Features

To Order, Specify:

• Includes eight (8) wire management loops. • Manages and stores wires or cables through loops under worksurfaces or desk tops. • Install anywhere under worksurfaces in recommended 18′′(457mm) intervals. • Loop capacity: 19, 25-pair communications cables. • Standard in charcoal finish color only.

1) Product number. (No finish specification required.)

Worksurface Grommet

WUAC-WSG

Class CA

Height

Inside Diameter

Outside Diameter

Number

Price

1′′(25mm)

2 3/4′′(70mm)

3′′(76mm)

WUAC-WSG

$14

Features

To Order, Specify:

• Includes one cover. • Must be field-installed. • Available in charcoal color only.

1) Product number. (No finish specification required.)

Available on RUSH.

Make-A-Corner

MAC-0001

Height

Width

Number

Price

21 1/8′′(537mm)

26 1/8′′(664mm)

MAC-0001

$127

Features

To Order, Specify:

• Creates an angled edge between two (2) perpendicular regular worksurfaces. • Slides over the top of worksurfaces. • Accommodates an adjustable keyboard or mouse pad track (screws included). • Use MAC-0001 for 1 3/16′′(30mm) thick worksurfaces.

1) Product number.

Class AA

254

April 2008 / USA

SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

2) Trim color.

UniGroup Too Price List

Worksurface Accessories for use with UniGroup Too, UniGroup & PLACES Length

Number

Price

Worksurface Reinforcement Channel

16′′(406mm) 24′′(610mm) 32′′(813mm) 39′′(991mm) 47′′(1194mm) 54′′(1372mm)

WUAR-1600-PH WUAR-2400-PH WUAR-3200-PH WUAR-3900-PH WUAR-4700-PH WUAR-5400-PH

$24 24 28 28 33 33

WUAR

Features

To Order, Specify:

• Includes metal, u-shaped channel and mounting screws. • Field installed, field located and drilled per installation instructions. • Worksurface reinforcement channels provide additional support for laminate or wood worksurfaces with 50′′ or larger spans that are heavily loaded and not otherwise supported by mid-span cantilevers, worksurface supports, legs, or under-worksurface storage.

1) Product number. (No finish specification required.)

Available on RUSH.

Application Guidelines Laminate or Wood Panel Hung Worksurface Applications (for standard 29′′ high worksurfaces) General Application/Number: • 54′′ wide with two suspended pedestals or stationary pedestals over 27′′ in height, use WUAR-1600-PH. • 60′′ wide top with two suspended pedestals or stationary pedestals over 27′′ in height, use WUAR-2400-PH. • 54′′ wide top with one suspended pedestal or stationary pedestal over 27′′ in height, use WUAR-3200-PH. • 60′′ wide top with one suspended pedestal or stationary pedestal over 27′′ in height, use WUAR-3900-PH. • 54′′ wide top − no suspended pedestal or stationary pedestal over 27′′ in height, use WUAR-4700-PH. • 60′′ wide top − no suspended pedestal or stationary pedestal over 27′′ in height, use WUAR-5400-PH. Worksurface reinforcement channels can provide additional strengthening to 50′′ and greater worksurfaces on like-sized panels where heavy loads are anticipated. Depending on application, heavily loaded worksurfaces may not need a worksurface reinforcement channel when: • Support is provided by a third cantilever on 50′′ and greater worksurfaces (spanning multiple panels) or by using other under-worksurface support methods. • Fixed/attached pedestals provide under- worksurface support. • Panel hung worksurfaces wider than 60′′ require more than two cantilevers. Laminate or Wood Convergent Tops and Convergent Freestanding Units • 72′′ UniGroup Too, UniGroup and PLACES convergent worksurfaces and wrap-around convergent worksurfaces, panel hung, or freestanding, use WUAR-3900-PH. Application Guidelines for using Worksurface Reinforcement Channel with Under-Worksurface Storage For UniGroup Too, UniGroup, PLACES worksurfaces at the standard 29′′ height. • All pedestals under 25′′ in height can be used under a worksurface with a worksurface reinforcement channel. • Mobile pedestals over 27′′ in height cannot be used under a worksurface with a worksurface reinforcement channel. By increasing worksurface height to 30′′, mobile pedestals can be used with a worksurface reinforcement channel. • Stationary pedestals can be used in applications with worksurface reinforcement channels. Refer to Laminate or Wood Panel Hung Worksurface Applications matrix information above regarding suspended and stationary pedestals. • In most applications, lateral files or fixed pedestals supply adequate support so that worksurface reinforcement channels are not needed.

Class CA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

255

UniGroup Too Price List

Worksurface Accessories for use with UniGroup Too, UniGroup & PLACES

Application Guidelines for using Worksurface Reinforcement Channel with AKP’s, Center Drawers, Mouse Pads and CPU Holders When worksurface reinforcement channels are used, application guidelines for AKP’s, center drawers, mouse pads, pencil drawers, and shallow drawers change as follows: • On 30′′(762mm)-deep worksurfaces, all keyboard pads and mouse pads (except AKPM-23-SFM) and all center drawers, pencil drawers, and shallow drawers [except Jump Stuff drawer (DGPR-C)] can be used with a worksurface reinforcement channel. For CPU holders, refer to and use the application guidelines for worksurfaces with one suspended or stationary pedestal. • On 24′′(610mm)-deep worksurfaces without grommets, only the following keyboard pads and mouse pads with a track depth of 17′′(432mm) or less can be used: Description

Number

Adjustable Keyboard Pad

AKPM-17-SLM

Boogie Board

HKTC-17-M

Boogie Board

HKTE-17-M

Boogie Board

HKTC-17-N

Boogie Board

HKTE-17-N

Mouse Pad

HMP-1

Mouse Pad with Horizontal Adjustment

HMP-2

Mouse Pad with Horizontal and Height Adjustment HMP-3 Adjustable Keyboard Pad with Tilt

AKPT-4

Adjustable Keyboard Pad with Tilt

AKPT-4P

• Also on 24′′(610mm)-deep worksurfaces without grommets, the following accessories cannot be used with a worksurface reinforcement channel: Jump Stuff Pencil + Drawer, all other pencil drawers, center drawers, or shallow drawers. For CPU holders, refer to the application guidelines for worksurfaces with one suspended or stationary pedestal. • On 24′′(610mm)-deep worksurfaces with rear grommets (PLACES, UniGroup and UniGroup Too), the following accessories cannot be used with a worksurface reinforcement channel: AKP’s, Pencil + Drawer, all other pencil drawers, center drawers, or shallow drawers. For CPU holders, refer to the application guidelines for worksurfaces with one suspended or stationary pedestal. • On 18′′(457mm)-deep worksurfaces, the following accessories cannot be used with a worksurface reinforcement channel: AKP’s, Jump Stuff Pencil + Drawer, all other pencil drawers, center drawers, or shallow drawers, and CPU holders. Power access devices or grommets cannot be installed in a worksurface above a worksurface reinforcement channel.

256

April 2008 / USA

Class CA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

UniGroup Too Price List

Worksurface Accessories for use with UniGroup Too, UniGroup & PLACES

Shallow Drawer

Height

Depth

Width

Number

Price

3′′(76mm)

15 3/8′′(391mm)

18 1/4′′(464mm)

DS-3

$36

Features

To Order, Specify:

• Shallow drawer has four compartments. • Drawer does not stack. • Available in charcoal or gray tone finish colors only.

1) Product number. 2) Trim color. TR-K Charcoal TR-G Gray Tone

DS-3

Class AA

Pencil Drawer

1 5/8′′(41mm)

19′′(483mm)

18′′(457mm)

PPD-18

$73

Features

To Order, Specify:

• Includes mounting hardware. • Mounts separately under worksurface. • Standard in black finish color only.

1) Product number. (No finish specification required.)

Available on RUSH. PPD-18

Class BA

Steel Center Drawer

2′′(51mm)

17 1/2′′(445mm)

19 1/8′′(486mm)

SCD-19

$190

Features

To Order, Specify:

• Includes mounting hardware. • Standard with lock. • Standard in charcoal finish color only.

1) Product number. (No finish specification required.)

SCD-19

Class MA

Pencil + Drawer

Height

Depth

Width

Number

Price

11′′(279mm)

24′′(610mm)

19 1/2′′(495mm)

KUDP-2420

$244

Features

To Order, Specify:

• Multi-purpose drawer provides organization, hanging filing along with laptop storage. • Knock-outs at rear of drawer provide electronic charging access while contents are locked. • Removable organizing tray. • Thin profile maximizes knee clearance under front of drawer. • Standard in black trim color with black locks. • Standard with lock (shipped separately); keyed-alike and master keying options available.

1) Product number. (No finish specification required.)

Available on RUSH.

Specification Tip • To be mounted below worksurfaces 24′′(610mm) or deeper.

KUDP-2420

Class YA

Height

Depth

Drawer Width

Number

Wood Group I

Wood Group II

3′′(76mm)

18 1/4′′(210mm)

25′′(635mm)

CD-60-W

$257

$281

Wood Center Drawer

Features

To Order, Specify:

• Includes a built-in pencil tray. • Features full extension slides. • Attaches under a 20′′(508mm), 24′′(610mm) or 30′′(762mm) worksurface.

1) Product number. 2) Wood finish color.

CD-60-W

Class OA

SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

257

UniGroup Too Price List

Worksurface Accessories for use with UniGroup Too, UniGroup & PLACES

Boogie Board Keyboard Tray with Palm Rest and Integrated Mouse Pad

HKTC-M HKTE-M

Height

Depth

Width

Description

Number

Price

5.3′′(135mm)

12′′(305mm)

28′′(711mm)

17′′(432mm) track, Comfort Palm Rest 17′′(432mm) track, Ergonomic Palm Rest 21′′(533mm) track, Comfort Palm Rest 21′′(533mm) track, Ergonomic Palm Rest

HKTC-17-M HKTE-17-M HKTC-21-M HKTE-21-M

$444 444 444 444

Features

To Order, Specify:

• Palm rests available in ergonomic height adjustable or soft comfort versions. • Stores under worksurfaces or lift entire tray to pull out. Release tray and it automatically saves distance-to-desk position. • Intuitive single lever on front of AKP adjusts both height and tilt. • Features spring assisted adjustment (with automatic lock) of 6.5′′(165mm) above worksurfaces and 4′′(102mm) below. • Integrated mouse pad tilts independently of keyboard tray. • Includes mouse pad insert (not shown) for optional use. • Mouse pad is interchangeable between right and left hand applications. • Ease of modifying positions reduces repetitive stress injuries by encouraging AKP repositioning throughout the day. • Superior stability (patented arm mechanism makes for smooth and stable operation). • A simple guide for new users located within the AKP for referencing. • Keyboard tray and mouse pad tilt +/-15°. • 360° rotation. • 17′′(432mm) track fits under worksurfaces 18′′(457mm) or deeper. • 21′′(533mm) track fits under worksurfaces 22′′(559mm) or deeper. Recommended for most corner applications.

1) Product number. 2) Finish color. Boogie Board is available in the following finish colors: • TR-0LX Ice (translucent blue) Keyboard tray in smoke with accents of graphite (palm rest, mouse pad insert and bottom of keyboard tray), and black (arm). • TR-0LU Shadow (translucent charcoal) Keyboard tray in charcoal with accents of graphite (palm rest, mouse pad insert and bottom of keyboard tray), and black (arm). Positive Tilt Lock-Out Option: For positive tilt lock-out option (0° to -15° tilt only), add suffix P to the product number. Example: HKTC-17-MP

Available on RUSH. Does not include positive tilt lock-out option.

Boogie Board Keyboard Tray with Palm Rest

HKTC-N HKTE-N

Boogie Board Mouse Pad

12′′(305mm)

21′′(533mm)

17′′(432mm) track, Comfort Palm Rest 17′′(432mm) track, Ergonomic Palm Rest 21′′(533mm) track, Comfort Palm Rest 21′′(533mm) track, Ergonomic Palm Rest

April 2008 / USA

HKTC-17-N HKTE-17-N HKTC-21-N HKTE-21-N

Features

To Order, Specify:

• Palm rests available in ergonomic height adjustable or soft comfort versions. • Stores under worksurfaces or lift entire tray to pull out. Release tray and it automatically saves distance-to-desk position. • Intuitive single lever on front of AKP adjusts both height and tilt. • Features spring assisted adjustment (with automatic lock) of 6.5′′(165mm) above worksurfaces and 4′′(102mm) below. • Ease of modifying positions reduces repetitive stress injuries by encouraging AKP repositioning throughout the day. • Superior stability (patented arm mechanism makes for smooth and stable operation). • A simple guide for new users located within the AKP for referencing. • Keyboard tray and mouse pad tilt +/-15°. • 360° rotation. • 17′′(432mm) track fits under worksurfaces 18′′(457mm) or deeper. • 21′′(533mm) track fits under worksurfaces 22′′(559mm) or deeper. Recommended for most corner applications.

1) Product number.

1′′(25mm)

11′′(279mm)

Boogie Board is available in the following finish colors: • TR-0LX Ice Keyboard tray in smoke with accents of graphite (palm rest and bottom of keyboard tray), and black (arm). • TR-0LU Shadow Keyboard tray in charcoal with accents of graphite (palm rest and bottom of keyboard tray), and black (arm). Positive Tilt Lock-Out Option: For positive tilt lock-out option (0° to -15° tilt only), add suffix P to the product number. Example: HKTC-17-NP

HKMP-1

Features

To Order, Specify:

• For use with Boogie Board AKP or on top of worksurfaces. • Integrated teeth allow right- or left-handed keyboard applications. • Easily attaches to keyboard tray. • Includes mouse pad insert (not shown) for optional use.

1) Product number.

Class YA – SIN 711-2; Discount Group XIII Canadian Conversion Factor: Refer to haworth.com/Canada

$420 420 420 420

2) Finish color.

8′′(203mm)

Available on RUSH.

HKMP-1

258

5.3′′(135mm)

$45

2) Finish color. Boogie Board mouse pad is available in the following finish colors: • TR-0LX Ice (translucent blue) Mouse pad insert standard in graphite. • TR-0LU Shadow (translucent charcoal) Mouse pad insert standard in graphite.

UniGroup Too Price List

Worksurface Accessories for use with UniGroup Too, UniGroup & PLACES Height Adjustable Keyboard Pad with Swivel Mouse Pad

AKPM-17-SLM AKPM-21-SLM

6′′(152mm)

Keyboard Depth

Pad Width

11 1/2′′(292mm) 19 1/2′′-28′′ (495-711mm)

Description

Number

Price

17′′(432mm) track Comfort Palm Rest

AKPM-17-SLM

$282

21′′(533mm) track Comfort Palm Rest

AKPM-21-SLM

282

Features

To Order, Specify:

• Vertical adjustment range of 6′′(152mm) below worksurface. • Keyboard tray and mouse pad tilt +/-15°. • Integrated Mouse Pad tilts independently of keyboard tray. • Palm Rest is soft comfort version and standard in graphite color only. • Base, mouse pad and mouse pad cover insert standard in charcoal only. • Mouse pad is interchangeable between right and left hand applications and has dual swivel. • 360° rotation. • 17′′(432mm) track fits under worksurfaces 18′′(457mm) or deeper. • 21′′(533mm) track fits under worksurfaces 22′′(559mm) or deeper. • Recommended for most corner applications.

1) Product number. (No finish specification required.)

Available on RUSH.

Adjustable Keyboard Pad with Swivel Mouse Pad

AKPM-23-SFM

6′′(152mm)

11 1/2′′(292mm) 19 1/2′′-28′′ (495-711mm)

23′′(584mm) track Comfort Palm Rest

AKPM-23-SFM

Features

To Order, Specify:

• Vertical adjustment range of 12′′(305mm); 6 3/4′′(171mm) below worksurface and 5 1/4′′(133mm) above. • Keyboard tray and mouse pad tilt +/-15° using soft touch knob. • Integrated Mouse Pad tilts independently of keyboard tray. • Palm Rest is soft comfort version and standard in graphite color only. • Base, mouse pad and mouse pad cover insert standard in charcoal only. • Mouse pad is interchangeable between right and left hand application and has dual swivel. • 360° rotation. • 23′′(584mm) track fits under worksurfaces 24′′(610mm) or deeper. • Recommended for most corner applications.

1) Product number. (No finish specification required.)

Class YA – SIN 711-2; Discount Group XIII Canadian Conversion Factor: Refer to haworth.com/Canada

$386

Positive Tilt Lock-Out Option: For positive tilt lock-out option (0 to -15° tilt only), add suffix P to the product number. Example: AKPM-23-SFMP

April 2008 / USA

259

UniGroup Too Price List

Worksurface Accessories for use with UniGroup Too, UniGroup & PLACES

Keyboard Pad / Keyboard Plate Mounting Guidelines on Curved Front Worksurface

NOTE: Not all AKPs fit on all worksurfaces. –Determine applicability by comparing the radius of corner worksurfaces with Pad Width. –Determine track size by measuring worksurface from location of grommets or other obstacles to front edge of worksurface.

Height Extended Tilting Keyboard Pad 8′′ (203mm)

AKPS-5 AKPS-5P

Adjustable Keyboard Pad with Tilt

AKPT-3 AKPT-3P AKPT-4 AKPT-4P

Maximum Keyboard Size 19.559′′(497mm) 24.529′′(623mm) 18.582′′(472mm) 19.376′′(492mm) 29.500′′(749mm) 21.702′′(551mm) 22.651′′(575mm) 34.470′′(876mm)

Radius 6′′(152mm) 12′′(305mm) 18′′(457mm) 18′′(457mm) 18′′(457mm) 24′′(610mm) 24′′(610mm) 24′′(610mm)

Pad/Plate Extension 12′′(305mm) 12′′(305mm) 7.25′′(184mm) 7.50′′(191mm) 12′′(305mm) 7.25′′(184mm) 7.50′′(191mm) 12′′(305mm)

Keyboard Depth

Pad Width

Track

5 3/4′′-9′′ (146-229mm)

17′′-22′′ (432-559mm)

21′′ (533mm)

Minimum Pad/Plate AKPS-5 AKPS-5 AKP-2 AKPT-3 AKPS-5 AKP-2 AKPT-3 AKPS-5

Palm Rest

Number

Price

Without

AKPS-5

$492

With

AKPS-5P

Features

To Order, Specify:

• Vertical adjustment range of 8′′(203mm); 6′′(152mm) below worksurface, 2′′(51mm) above worksurface. • Tray tilts +15°/-15°. • Stores under worksurface. • Up-down adjustment of 8′′(203mm) with knob on lower right side. • 360° rotation. • Fits under worksurfaces 19′′(483mm) or deeper. • Features spring-assisted height adjustment.

1) Product number.

5 1/2′′ (140mm)

5 3/4′′-9′′ (146mm-229mm)

17-22′′ (432mm-559mm)

21′′ (533mm) track

5 1/2′′ (140mm)

5 3/4′′-9′′ (146mm-229mm)

17-22′′ (432mm-559mm)

17′′ (431mm) track

2) Trim color. TR-K Charcoal base/Charcoal pad TR-J Charcoal base/Graphite pad

Without

AKPT-3

$431

With Without

AKPT-3P AKPT-4

515 $414

With

AKPT-4P

496

Features

To Order, Specify:

• • • •

1) Product number.

• • • • •

In-out adjustment of 15 7/8′′(403mm). Tray tilts +15°/-0°. Stores under worksurface. Up-down adjustment of 6′′(152mm) with knob on lower right side. 360° rotation. Spring-assisted height adjustment. AKPT-4 with 17′′(432mm) track fits under worksurfaces 18′′(457mm) or deeper. AKPT-3 with 21′′(533mm) track fits under worksurfaces 22′′(559mm) or deeper. Fits under worksurfaces 18′′(457mm) or deeper.

580

2) Trim color. TR-K Charcoal base/Charcoal pad TR-J Charcoal base/Graphite pad

Available on RUSH.

Adjustable Keyboard Pad

AKP-2 AKP-2P

5 1/2′′ (140mm)

5 3/4′′-9′′ (146mm-229mm)

17-22′′ (432mm-559mm)

21′′ (533mm)

April 2008 / USA

AKP-2

With

AKP-2P

Features

To Order, Specify:

• In-out adjustment of 12 3/4′′(324mm). • Stores under worksurface. • Up-down adjustment of 5 1/2′′(140mm) with knob on lower right side. • 360° rotation. • Fits under worksurfaces 19′′(483mm) or deeper.

1) Product number.

Available on RUSH.

260

Without

Class AA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

2) Trim color. TR-K Charcoal base/Charcoal pad TR-J Charcoal base/Graphite pad

$368 460

UniGroup Too Price List

Worksurface Accessories for use with UniGroup Too, UniGroup & PLACES

Adjustable Keyboard Pad — Fixed Height

AKPF-1 AKPF-1P

Palm Rest

PR-1

Height

Keyboard Depth

Pad Width

Track

3 1/2′′ (89mm)

5 3/4′′-9′′ (146mm-229mm)

17-22′′ (432mm-559mm)

17′′ (431mm)

Palm Rest

Number

Price

Without

AKPF-1

$240

With

AKPF-1P

Features

To Order, Specify:

• In-out adjustment of 12 3/4′′(324mm). • Stores under worksurface. • 3′′(76mm) drop from bottom of worksurface to fixed keyboard pad. • 360° rotation. • Fits under worksurfaces 19′′(483mm) or deeper.

1) Product number.

332

2) Trim color. TR-K Charcoal base/Charcoal pad TR-J Charcoal base/Graphite pad

Available on RUSH.

1′′ (25mm)

2 1/2′′ (64mm)

19 1/2′′ (495mm)

PR-1

Features

To Order, Specify:

• • • • • •

1) Product number. (No finish specification required.)

Fits AKPS, AKPT, AKP and AKPF. Adjusts in-out 1 3/4′′(44mm). Adjusts up-down 1′′(25mm). Rotates under the keyboard pad for storage. Field attached. Standard in charcoal finish color only.

$93

Available on RUSH.

Class AA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

261

UniGroup Too Price List

Worksurface Accessories for use with UniGroup Too, UniGroup & PLACES

Mouse Pad with Horizontal and Height Adjustment

Height

Depth

Width

Number

Price

3′′(76mm)

12′′(305mm)

8 1/2′′(216mm)

HMP-3

$227

Features

To Order, Specify:

• In/out adjustment of 12 3/4′′(324mm). • Stores under worksurface on an 18′′(457mm) track at any angle. • 360° rotation. • Features spring-assisted height adjustment. • Vertical adjustment range of 5 1/2′′(140mm). • Fits any worksurface 19′′(483mm) or deeper. • Standard in charcoal finish color only.

1) Product number. (No finish specification required.)

Available on RUSH.

HMP-3

Mouse Pad with Horizontal Adjustment

3′′(76mm)

12′′(305mm)

8 1/2′′(216mm)

HMP-2

Features

To Order, Specify:

• In/out adjustment of 12 3/4′′(324mm). • Stores under worksurface on an 18′′(457mm) track at any angle. • 360° rotation. • Fixed-height pad is 3 1/2′′(89mm) below worksurface top. • Fits any worksurface 19′′(483mm) or deeper. • Standard in charcoal finish color only.

1) Product number. (No finish specification required.)

$173

HMP-2

Mouse Pad

3′′(76mm)

12′′(305mm)

8 1/2′′(216mm)

To Order, Specify:

• • • • •

1) Product number. (No finish specification required.)

Stores by rotating pad under worksurface. 360° rotation. Fixed-height pad is 3 1/2′′(89mm) below worksurface top. Fits any worksurface. Standard in charcoal finish color only.

HMP-1

262

April 2008 / USA

HMP-1

Features

Class AA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

$131

UniGroup Too Price List

Worksurface Accessories for use with UniGroup Too, UniGroup & PLACES

Monitor Arm − Single

Description

Number

Price

Single Monitor Arm

KUC1-0000-

$480

Features

To Order, Specify:

• Quick-install mechanism allows flat-screen monitors to quickly and securely snap into position. • Provides easy adjustment of monitor height and position. • Vertical adjustment range of 18′′(457mm). • Cord management reduces workspace clutter. • Includes desk clamp mounting option. • Arm standard in silver trim only.

1) Product number. (No finish specification required.)

Light Monitor Specification: For 15′′(381mm)-18′′(457mm) monitors that weigh 6-13 lbs., add L to the end of the product number. Example: KUC1-0000-L

Specification Tips

KUC1-0000

Monitor Arm − Dual or Triple

• Desk clamp can mount on surfaces 2′′(51mm) thick or less. • Certified VESA® monitor compatible - includes 75mm and 100mm adapter plates.

Dual Monitor Arm Triple Monitor Arm

Heavy Monitor Specification: For 19′′(483mm)-21′′(533mm) monitors that weigh 14-21 lbs., add H to the end of the product number. Example: KUC1-0000-H

KUC2-0000-H KUC3-0000-H

$1068 1204

Features

To Order, Specify:

• Allows for installation of two or three flat-screen monitors above worksurface. • Provides easy height adjustment. • Independently adjust the pivot and tilt of each monitor. • Vertical adjustment range of 18′′(457mm). • Includes desk clamp mounting options. • Arm standard in silver trim only.

1) Product number. (No finish specification required.)

KUC2-0000-H

Specification Tips • Weight range is 4-19 lbs. per monitor. • Certified VESA monitor compatible - includes 75mm and 100mm adapter plates.

Triple Monitor Specification Tips • Weight range is 2-12 lbs. per monitor. • Certified VESA monitor compatible - includes 75mm and 100mm adapter plates. KUC3-0000-H

Class YA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

263

UniGroup Too Price List

Adaptable Upper Storage for use with UniGroup Too, UniGroup, PLACES

Open Shelf, Standard Mount

Height

Width

Number

Price

8′′(203mm)

24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 66′′(1676mm) 72′′(1829mm)

UESN-0824-PM UESN-0830-PM UESN-0836-PM UESN-0842-PM UESN-0848-PM UESN-0854-PM UESN-0860-PM UESN-0866-PM UESN-0872-PM

$176 185 193 199 207 211 215 221 226

UESN-PM

Features

To Order, Specify:

• Includes shelf with back stop, end panels and hardware. • Accepts separately specified task lights. • Safety interlock prevents dislodgment from panel connector slots. • Shelf thickness is 2′′(51mm). • Shipped unassembled.

1) Product number. 2) Trim color for shelf and end panels. $23 upcharge (list) for Metallic trim color.

Available on RUSH.

Specification Tips • Specify separate shelf gang clip NUB-1 for unbalanced configurations with greater than one row of shelves. • To be installed in panel trim rails on same size panel or on a combination of panels that equals the shelf width.

Overhead Storage Unit / Shelf Gang Clip

Description

Number

Price

One set

NUB-1

$35

Features

To Order, Specify:

• Provides additional stability in unbalanced panel configurations with adjacent shelves and overheads. • Gangs adaptable style overheads and shelves. • Does not gang OneTouch overheads. • Standard in aluminum finish.

1) Product number. (No finish specification required.)

NUB-1

264

April 2008 / USA

Class CA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

UniGroup Too Price List

Adaptable Upper Storage for use with UniGroup Too, UniGroup, PLACES

Overhead Storage Unit, Standard Mount — Painted, Translucent or Wood Front

UEFS-PM UEFF-QM UEFS-WM

Height

Depth

Width

Painted Door 1 2 Number

Price

16′′(406mm)

14′′(356mm)

24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 66′′(1676mm) 72′′(1829mm)

UEFS-1624-PM UEFS-1630-PM UEFS-1636-PM UEFS-1642-PM UEFS-1648-PM UEFS-1654-PM UEFS-1660-PM UEFS-1666-PM UEFS-1672-PM

$467 482 514 531 551 603 656 804 951

Height

Depth

Width

Translucent Door 1 2 Number

White Price

Patterned Price

16′′(406mm)

14′′(356mm)

24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 66′′(1676mm) 72′′(1829mm)

UEFF-1624-QM UEFF-1630-QM UEFF-1636-QM UEFF-1642-QM UEFF-1648-QM UEFF-1654-QM UEFF-1660-QM UEFF-1666-QM UEFF-1672-QM

$ 606 631 674 695 720 788 857 1049 1240

$ 830 876 939 981 1026 1104 1183 1386 1587

Height

Depth

Width

Wood Door Number

Wood Group I

Wood Group II

16′′(406mm)

14′′(356mm)

24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 66′′(1676mm) 72′′(1829mm)

UEFS-1624-WM UEFS-1630-WM UEFS-1636-WM UEFS-1642-WM UEFS-1648-WM UEFS-1654-WM UEFS-1660-WM UEFS-1666-WM UEFS-1672-WM

$ 602 624 667 686 708 775 847 1031 1219

$ 633 657 702 723 747 816 892 1086 1283

Inside Dimensions Height

12 3/4′′(324mm)

Depth

13 1/4′′(337mm)

1 2

Features

To Order, Specify:

• Includes door front without lock, shelf with back stop, end panels, and hardware. Optional lock available. • Locks are available in black or chrome. Lock plug(s) and key(s) are shipped with random numbering unless they are specified ‘‘keyed-alike’’ or ‘‘master-keyed’’. • Accepts separately specified task lights. • Door stores on top of unit. • Safety interlock prevents dislodgment from side panel trim rail slots. • 66′′(1676mm) and 72′′(1829mm) units have two doors, one lock per door. • Shipped unassembled.

1) Product number, including:

Available on RUSH.

1 Lock Options: N Non-Locking L

Locking, add $14 list.

2 Close Option: S

Slow Close, add $240 list. 66′′ and 72′′ wide units, add $480 list. No Specification required for regular close.

Specification Tips

2) Trim color for shelf and end panels.

• To be installed in panel side trim rail slots on same size panel or on a combinations of panels that equal the width of the storage unit. • Doors cannot be retrofitted with locks. • Standard mount overhead storage unit cannot be retrofitted to up mount overhead storage unit. • Painted and translucent doors can be field retrofitted with slow close mechanism from eParts. Wood door requires purchase of new door with slow close mechanism from eParts. • Specify separate shelf gang clip NUB-1 for unbalanced configurations with greater than one row of storage units.

3) Trim color, translucent color, wood color for door.

Class CA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

4) Trim color for lock plug. $55 upcharge (list) for Metallic trim color.

April 2008 / USA

265

UniGroup Too Price List

Adaptable Upper Storage for use with UniGroup Too, UniGroup, PLACES

Overhead Storage Unit, Up Mount — Painted, Translucent or Wood Front

Height

Depth

Width

Painted Door 1 2 Number

Price

16′′(406mm)

14′′(356mm)

24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm)

UEGS-1624-PM UEGS-1630-PM UEGS-1636-PM UEGS-1642-PM UEGS-1648-PM

$664 686 717 736 749

Height

Depth

Width

Translucent Door 1 2 Number

White Price

Patterned Price

16′′(406mm)

14′′(356mm)

24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm)

UEGF-1624-QM UEGF-1630-QM UEGF-1636-QM UEGF-1642-QM UEGF-1648-QM

$ 936 977 1028 1067 1092

$1160 1222 1293 1353 1398

Wood Group I

Wood Group II

$820 852 893 918 933

$863 897 940 967 984

UEGS-PM UEGF-QM UEGS-WM

Inside Dimensions Height

12 3/4′′(324mm)

Height

Depth

Width

Wood Door Number

Depth

13 1/4′′(337mm)

16′′(406mm)

14′′(356mm)

24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm)

UEGS-1624-WM UEGS-1630-WM UEGS-1636-WM UEGS-1642-WM UEGS-1648-WM

Features

To Order, Specify:

• Includes door front without lock, shelf with full back, end panels, mount brackets and hardware. Optional lock available. • Locks are standard in black or chrome. Lock plug(s) and key(s) are shipped with random numbering unless they are specified ‘‘keyed-alike’’ or ‘‘master-keyed’’. • Accepts separately specified task lights. • Door stores on top of unit. • Safety interlock prevents dislodgment from panel side trim rail slots. • Shipped assembled.

1) Product number, including:

Available on RUSH.

266

April 2008 / USA

1 2

1 Lock Options: N Non-Locking L

Locking, add $14 list.

2 Close Options: S

Slow Close, add $240 list. No Specification required for regular close.

Specification Tips

2) Trim color for shelf and end panels.

• To be installed in panel side trim rail slots on same size panel or on a combinations of panels that equal the width of the storage unit. • Recommended for use with 48′′(1219mm)- or 56′′(1422mm)-high panel configurations. • Doors cannot be retrofitted with locks. • Up mount overhead storage unit cannot be retrofitted to standard mount overhead storage unit. • Painted and translucent doors can be field retrofitted with slow close mechanism from eParts. Wood door requires purchase of new door with slow close mechanism from eParts. • Using up mount overheads limits allowable panel runs to 10 feet maximum and requires that worksurfaces use side-mount brackets, worksurface support panels or other form of floor support. (Fully cantilevered worksurfaces are not allowed). Return panels on each end must equal height of panel run and depth of worksurface. • Cannot be installed above a slat pad, tackboard, markerboard, or add-on glazed panel.

3) Trim color, translucent color or wood color for door.

Class CA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

4) Trim color for lock plug. $67 upcharge (list) for Metallic trim color.

UniGroup Too Price List

Adaptable Upper Storage for use with UniGroup Too, UniGroup, PLACES

Straight Mini Shelf, Standard Mount

Height

Depth

Width

Number

Price

4 1/4′′(108mm)

6 1/4′′(159mm)

18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm)

UESY-0418-PM UESY-0424-PM UESY-0430-PM UESY-0436-PM UESY-0442-PM UESY-0448-PM

$155 161 167 175 183 189

Features

To Order, Specify:

• Includes shelf, brackets, and hardware. • Shelf thickness is 3/4′′(19mm). • Shipped unassembled.

1) Product number. 2) Trim color for shelf. 3) Trim color for brackets. $8 upcharge (list) for Metallic trim color:

Specification Tips UESY-PM

Corner Mini Shelf, Standard Mount

• To be installed in connector slots on same size panel or on a combination of panels that equals the shelf width. • Support brackets must be installed under shelf surface. • Designed for lightweight accessories. • Does not accept separately specified task lights.

4 1/4′′(108mm)

6 1/4′′(159mm)

24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm)

Features

To Order, Specify:

• • • •

1) Product number.

Includes shelf, brackets, and hardware. Middle of shelf is 15 1/4′′(387mm) deep. Shelf thickness is 3/4′′(19mm). Shipped unassembled.

Specification Tips UESZ-PM

UESZ-0424-PM UESZ-0430-PM UESZ-0436-PM UESZ-0442-PM UESZ-0448-PM

$300 308 316 333 333

2) Trim color for shelf. 3) Trim color for brackets. $8 upcharge (list) for Metallic trim color:

• To be installed in connector slots on two panels or on a combination of panels of equivalent widths in 90° configuration. • Support brackets must be installed under shelf surface. • Designed for lightweight accessories. • Does not accept separately specified task lights.

Class CA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

267

UniGroup Too Price List

Mini Shelves for use with UniGroup Too, UniGroup, PLACES

Straight Mini-Shelf

Height

Depth

Width

Number

Price

5 1/2′′(140mm)

6 1/4′′(159mm)

18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm)

HMSS-0618 HMSS-0624 HMSS-0630 HMSS-0636 HMSS-0642 HMSS-0648

$153 161 169 175 188 194

HMSS

Corner Mini-Shelf

HMSC

268

April 2008 / USA

Features

To Order, Specify:

• • • •

1) Product number.

Includes brackets and mini-shelf. Mounts on single or multiple panels of equivalent widths. Support bracket may be mounted under shelf surface only. Does not accept task lights.

5 1/2′′(140mm)

6 1/4′′(159mm)

2) Shelf trim color. 3) Bracket trim color.

24′′(610mm) x 24′′(610mm) 30′′(762mm) x 30′′(762mm) 36′′(914mm) x 36′′(914mm) 42′′(1067mm) x 42′′(1067mm) 48′′(1219mm) x 48′′(1219mm)

HMSC-0624 HMSC-0630 HMSC-0636 HMSC-0642 HMSC-0648

Features

To Order, Specify:

• Includes brackets and corner mini-shelf. • Mounts on two panels of equivalent widths in 90° configuration. • Middle of shelf is 16′′(406mm) deep. • Shelf thickness is 3/4′′(19mm). • Support bracket may be mounted under shelf surface only. • Does not accept task lights.

1) Product number.

Class BA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

2) Shelf trim color. 3) Bracket trim color.

$309 334 353 369 390

UniGroup Too Price List

OneTouch Overhead Storage Unit for use with UniGroup Too, UniGroup, PLACES

Overhead Storage Unit

HORS

Class BA

Interior Dimensions Height

14′′(356mm)

Depth

14 1/2′′(368mm)

Height

Depth

Width

Number

Price

16′′(406mm)

18′′(457mm)

30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 60′′(1524mm)

HORS-30 HORS-36 HORS-42 HORS-48 HORS-60

$803 834 871 904 952

Features

To Order, Specify:

• Price includes door front with lock, shelf and attachment hardware. • Steel shelf with fully enclosed back. Injection molded ABS front door. • Locks are available in black or chrome. Lock plug(s) and key(s) are shipped with random numbering unless they are specified ‘‘keyed-alike’’ or ‘‘master-keyed’’. • Off-modular design. • Accepts separately specified task lighting. • Keyed alike and master keying options available. • Only one row of units can be mounted on panel configurations with unbalanced components application. • Ships fully assembled.

1) Product number. 2) Finish color. 3) Trim color for lock plug.

Available on RUSH.

Shelf depth 12 1/2′′(318mm) *Closed height=16′′(406mm) Opened height=19′′(483mm) NOB-1

OneTouch Gang Clip

NOB-1

Class FA

Features

To Order, Specify:

• Includes one bracket and attachment screws. • Provides additional stability in unbalanced panel configurations with adjacent overheads. • Recommended for stack kits that have one row of OneTouch overhead storage units.

1) Product number.

SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

$35

2) Finish color.

April 2008 / USA

269

UniGroup Too Price List

UniGroup Shelves and Flipper Doors for use with UniGroup Too, UniGroup, PLACES

Low Shelf

SL

Height

Depth

Width

Number

Price

8 3/4′′(222mm)

13 5/8′′(346mm)

24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 60′′(1524mm)

SL-2 SL-30 SL-3 SL-42 SL-4 SL-5

$193 197 212 212 212 226

Features

To Order, Specify:

• Includes shelf, end supports, and connection hardware. • 1/2′′(13mm) thick shelf end with radius corners and T-mold edge. • Shelf pan is 1 1/4′′(32mm) thick. • Accepts separately specified task lights.

1) Product number. 2) End support Videne color. 3) T-molding and end cap trim color. 4) Shelf trim color.

Available on RUSH.

Regular Shelf

SR

15 3/4′′(400mm)

13 5/8′′(346mm)

24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 60′′(1524mm)

SR-2 SR-30 SR-3 SRS-42 SR-4 SR-5

$197 203 209 214 219 242

Features

To Order, Specify:

• Includes shelf, end supports, and connection hardware. • 1/2′′(13mm) thick shelf end with radius corners and T-mold edge. • Shelf pan is 1 1/4′′(32mm) thick. • Accepts separately specified flipper door (FDRF, FDRV). • Accepts separately specified task lights.

1) Product number. 2) End support Videne color. 3) T-molding and end cap trim color. 4) Shelf trim color.

Available on RUSH.

Regular Flipper Door Front — Fabric or Laminate Door Front

Fabric Number Height

Depth

Width

15 5/8′′(397mm) 13 1/2′′(343mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 60′′(1524mm)

1 FDRF-2FDRF-30FDRF-3FDRF-42FDRF-4FDRF-5-

Fabric Grade A B C

D

E

F

G

$378 391 412 428 470 561

$445 458 493 509 551 667

$450 463 498 514 556 672

$456 469 503 519 561 678

$461 474 509 525 567 683

$391 404 431 447 489 585

$418 431 458 470 516 618

Laminate Number Height

Depth

Width

15 5/8′′(397mm) 13 1/2′′(343mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 60′′(1524mm)

FDRF FDRV

1 FDRV-2FDRV-30FDRV-3FDRV-42FDRV-4FDRV-5-

Price $349 359 390 404 420 517

Features

To Order, Specify:

• • • • • •

Includes top and door only; order shelf unit separately. For use with UniGroup regular shelves (SR, SRS). Standard with chrome lock plug and bezel. Top and door pre-assembled. Door interior is black only. Available without lock.

1) Product number, including:

Available on RUSH.

2) Door front fabric/colorway or laminate surface color.

1 Lock Option: N Non-Locking L

Locking, add $16 list.

3) Door vinyl edge trim color. 4) Top trim color.

270

April 2008 / USA

Class AA – SIN 711-1; Discount Group 1 Canadian Conversion Factor: Refer to haworth.com/Canada

UniGroup Too Price List

PLACES Shelves for use with UniGroup Too, UniGroup and PLACES

Low Shelf — Painted

Height

Depth

Width

Number

Price

9 3/4′′(248mm)

13 3/4′′(349mm)

24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm)

HSL-0024 HSL-0030 HSL-0036 HSL-0042 HSL-0048 HSL-0054 HSL-0060

$225 231 237 243 251 260 266

HSL

Features

To Order, Specify:

• Includes shelf, end supports, and connection hardware. • 3/4′′(19mm) thick vinyl covered end supports and 1 1/4′′(32mm) thick painted shelf. • Interior shelf depth is 12 1/4′′(311mm). • Interior height is 7 1/2′′(191mm). • Accepts separately specified task lights.

1) Product number. 2) End support trim color. 3) Shelf trim color.

Available on RUSH.

Regular Shelf — Painted

HSR

16 3/4′′(425mm)

13 3/4′′(349mm)

24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm)

HSR-0024 HSR-0030 HSR-0036 HSR-0042 HSR-0048 HSR-0054 HSR-0060

Features

To Order, Specify:

• Includes shelf, end supports, and connection hardware. • 3/4′′(19mm) thick vinyl covered end supports and 1 1/4′′(32mm) thick painted shelf. • Interior shelf depth is 12 1/4′′(311mm) • Interior height is 14 1/8′′(359mm) • Accepts separately specified flipper door (HFDR-F, HFDR-P). • Accepts separately specified task lights.

1) Product number.

$231 237 243 251 260 272 285

2) End support trim color. 3) Shelf trim color.

Available on RUSH.

Class BA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

271

UniGroup Too Price List

PLACES Flipper Doors/Overhead Storage for use with PLACES (HSR) Regular Shelf Height

Depth

Width

Fabric Number

Fabric Grade A B C

D

E

F

G

$529 545 579 602 646 726 781

$534 550 584 607 651 730 785

$539 555 590 613 657 736 791

$556 571 595 618 662 747 802

Regular Flipper Door Front — Fabric or Laminate

16 3/4′′(425mm) 13 3/4′′(349mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm)

HFDR-0024-F HFDR-0030-F HFDR-0036-F HFDR-0042-F HFDR-0048-F HFDR-0054-F HFDR-0060-F

$455 471 491 514 558 610 665

HFDR-F HFDR-P

Height

Laminate Number

Price

HFDR-0024-P HFDR-0030-P HFDR-0036-P HFDR-0042-P HFDR-0048-P HFDR-0054-P HFDR-0060-P

$425 441 468 491 512 570 625

Depth

Width

16 3/4′′(425mm) 13 3/4′′(349mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm)

$469 485 512 535 579 636 691

$498 514 541 564 608 673 728

Features

To Order, Specify:

• • • • •

1) Product number.

Includes top, door, and lock; order shelf unit separately. Standard chrome lock and bezel. For use with PLACES regular shelves (HSR). Top and door pre-assembled. Door interior surface is black only.

2) Door front fabric/colorway or laminate color. 3) Top/pull trim color.

Available on RUSH.

Regular Overhead — Painted Case — Wood Door Front — Wood Pull

HOR3-WP

272

April 2008 / USA

Height

Depth

Width

Number

Wood Group I

Wood Group II

16 3/4′′(425mm)

13 3/4′′(349mm)

24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm)

HOR3-0024-WP HOR3-0030-WP HOR3-0036-WP HOR3-0042-WP HOR3-0048-WP HOR3-0054-WP HOR3-0060-WP

$ 700 743 781 821 861 902 1004

$ 718 762 800 841 882 923 1027

Features

To Order, Specify:

• Includes door, shelf, end supports, connection hardware and lock. • Standard chrome lock and bezel. • Door surface is wood veneer. • Shelf is painted metal. • Wood pull. • Accepts separately specified task lights.

1) Product number.

Class BA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

2) Door/pull wood finish color. 3) Case trim color. 4) Shelf trim color.

UniGroup Too Price List

Shelf Accessories

Adaptable/OneTouch Shelf Dividers

Height

Depth

Width

Number

Price

4′′(102mm)

13 1/4′′(337mm)

1 3/4′′(44mm)

NADR-8

$157

Features

To Order, Specify:

• Includes box of eight shelf dividers. • To be used to divide space laterally on panel mounted shelves or up mount shelves, standard or up mount overhead storage units, or vertical storage units, Adaptable open shelf, Adaptable overhead storage unit and OneTouch storage unit.

1) Product number. 2) Trim color. $10 upcharge (list) for Metallic trim color.

NADR-8

Class CA

UniGroup/PLACES Shelf Dividers

3 13/16′′(97mm)

3 1/4′′(83mm)

12 1/4′′(311mm)

SD-12

Features

To Order, Specify:

• Includes eight shelf dividers. • Formed lips attach to shelf. • For use with PLACES and UniGroup low and regular shelves.

1) Product number.

$230

2) Trim color.

Available on RUSH. SD-12

Class AA

UniGroup/PLACES Shelf Back Guard

HBG

2 3/4′′(70mm)

24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm)

HBG-0024 HBG-0030 HBG-0036 HBG-0042 HBG-0048 HBG-0054 HBG-0060

Features

To Order, Specify:

• • • • •

1) Product number.

Includes back guard and attachment hardware. Provides protection of the panel fabric. For use with PLACES and UniGroup low and regular shelves. Shelf thickness is 3/4′′(19mm). Field installed using existing screw locations on shelf.

$31 34 37 40 49 53 60

2) Trim color.

Class BA

Wall Track

60′′(1524mm) 72′′(1829mm) 84′′(2134mm)

3/4′′(19mm)

5/8′′(16mm)

Features

To Order, Specify:

• Includes two wall tracks and attachment screws (#10 2 1/2′′ long). • For attachment of components to structural walls. • See installation instructions for proper mounting.

1) Product number.

Specification Tip WT

WT-60 WT-72 WT-84

$101 123 137

2) Trim color for screws. $13 upcharge (list) for Metallic trim color. 3) Trim color for track. $13 upcharge (list) for Metallic trim color.

• Not for use with up-mount overhead storage unit.

Class CA

SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

273

UniGroup Too Price List

Adaptable Wall Mount Components for use with UniGroup Too, UniGroup, PLACES

Wall Mounted Overhead Storage Unit, Painted or Wood Fronts

Height

Depth

Width

Painted Number

16′′(406mm)

14′′(356mm)

24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 66′′(1676mm) 72′′(1829mm)

UUFS-1624-PW UUFS-1630-PW UUFS-1636-PW UUFS-1642-PW UUFS-1648-PW UUFS-1654-PW UUFS-1660-PW UUFS-1666-PW UUFS-1672-PW

$ 542 560 592 615 636 692 749 903 1058

Height

Depth

Width

Translucent Door 1 2 Number

White Price

Patterned Price

16′′(406mm)

14′′(356mm)

24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 66′′(1676mm) 72′′(1829mm)

UUFF-1624-QW UUFF-1630-QW UUFF-1636-QW UUFF-1642-QW UUFF-1648-QW UUFF-1654-QW UUFF-1660-QW UUFF-1666-QW UUFF-1672-QW

$ 621 644 687 708 729 798 871 1061 1256

$ 852 896 960 1002 1044 1124 1207 1408 1613

Height

Depth

Width

Wood Number

Wood Group I

Wood Group II

16′′(406mm)

14′′(356mm)

24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 66′′(1676mm) 72′′(1829mm)

UUFS-1624-WW UUFS-1630-WW UUFS-1636-WW UUFS-1642-WW UUFS-1648-WW UUFS-1654-WW UUFS-1660-WW UUFS-1666-WW UUFS-1672-WW

$ 681 706 750 775 798 869 945 1137 1334

$ 705 731 776 802 826 901 979 1178 1383

UUFS-PW UUFS-WW

Inside Dimensions Height

12 3/4′′(324mm)

Depth

13 1/4′′(337mm)

April 2008 / USA

1 2

Painted Price

Features

To Order, Specify:

• Includes top shelf, bottom shelf with back stop, end panels, doors and wall attachment brackets. • Locks are available black or chrome. Lock plug(s) and key(s) are shipped with random numbering unless they are specified ‘‘keyed-alike’’ or ‘‘master-keyed’’. • Inside dimensions: • –Height: 12 3/4′′(324mm) • –Depth: 12 1/4′′(311mm) • Accepts separately specified task lights. • Door stores on top of unit. • 66′′(1676mm) and 72′′(1829mm) units have two doors with one lock per door if locking option is specified. • Optional non-structural back is available. • Shipped unassembled.

1) Product number, including:

Available on RUSH.

274

1 2

1 Lock Options: N Non-Locking L

Locking, add $14 list.

2 Close Options: S

Slow Close, add $252 list. 66′′ and 72′′ wide units, add $504 list. No Specification required for regular close.

2) Trim color for case. 3) Trim or wood finish color for front.

Specification Tips

4) Trim color for lock plug.

• Doors cannot be retrofitted with locks. • Painted and translucent doors can be field retrofitted with slow close mechanism from eParts. Wood door requires purchase of new door with slow close mechanism from eParts. • Must be properly anchored to a structural wall. • Anchors are not provided, must be field supplied.

$57 upcharge (list) for Metallic trim color.

Class CA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

UniGroup Too Price List

Adaptable Wall Mount Components for use with UniGroup Too, UniGroup, PLACES Outside Height Back for Wall Mounted Overhead Storage Unit

16′′(406mm)

UUFB-P

Width

Number

Price

24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 66′′(1676mm) 72′′(1829mm)

UUFB-0024-P UUFB-0030-P UUFB-0036-P UUFB-0042-P UUFB-0048-P UUFB-0054-P UUFB-0060-P UUFB-0066-P UUFB-0072-P

$ 66 71 77 82 87 92 97 102 107

Features

To Order, Specify:

• Includes one painted back and mounting hardware. • Used to cover wall mount attachment brackets.

1) Product number.

Specification Tips

Note: $20 Upcharge (list) for Metallic trim color.

2) Trim color.

• For use on Wall Mount Overhead Storage Units only. • Back must match width of Wall Mounted Overhead Storage Units.

Tackboard Wall Mount

Nominal Height 16′′(406mm)

KUAF

Width

Number

Fabric Grade A B C

D

E

F

G

24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 60′′(1524mm)

KUAF-1624 KUAF-1630 KUAF-1636 KUAF-1642 KUAF-1648 KUAF-1660

$171 173 182 193 200 228

$196 199 210 223 234 267

$204 209 220 234 244 279

$240 248 264 281 296 338

$257 265 282 301 317 363

$179 182 191 203 211 240

$187 190 200 213 221 253

Feature

To Order, Specify:

• Includes one tackboard and attachment hardware.

1) Product number.

Specification Tip

2) Fabric surface and color.

• Designed to be used under wall mounted overhead storage units.

Worksurface/Worksurface Support Panel to Wall Bracket

ZUBW-PN

Number

Price

ZUBW-0000-PN

$20

Features

To Order, Specify:

• Includes one bracket and worksurface or worksurface support panel mounting screws. • Screws/anchors for attachment to wall are field supplied. • Worksurface to wall application • –Partially supports the back of a worksurface in wall mount application when a vertical wall track is not desired. • Worksurface Support Panel to wall application • –Attaches a worksurface support panel (ZZFS) to a building wall in a wall mount application when a vertical wall track is not desired. • Standard in black finish only.

1) Product number. (No finish specification required.)

Specification Tips • • • •

Must be properly anchored to a structural wall. Worksurface front corners support requirements: –One corner must be floor supported. –Second corner must be either floor supported or attached to an adjacent worksurface with a flush mount kit. • –The distance between these floor supports may not exceed 10 feet.

Bracket Requirements Length of a particular worksurface adjacent to the wall (inches)

Min # of Brackets Required (qty)

12-47

2

48-83

3

84-120

4

Class CA – SIN 711-1; Discount Group VIII Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

275

UniGroup Too Price List

Task Lighting for use with UniGroup Too, UniGroup, PLACES

Adaptable Electronic Ballast Task Light

LUTS-16UEP

C

R

US

Height

Depth

Width

Number

Price

1.375′′(25mm)

4 1/4′′(105mm)

24′′(610mm) 30′′(762mm) 42′′(1067mm) 54′′(1372mm)

LUTS-0024-16UEP LUTS-0030-16UEP LUTS-0042-16UEP LUTS-0054-16UEP

$162 169 185 198

Features

To Order, Specify:

• Includes mounting brackets, black power cord, prismatic lens, low mercury content, and T-8 optic fluorescent lamp with 3500K color temperature. • Six foot cord is factory installed on right side; may be field-installed on the left-hand side 42′′(1067mm) and 54′′(1372mm) units. • Nine foot cord is available as a specified option. • Provides task lighting beneath shelves or overhead storage units. • Available in charcoal only. • For use with 120 volt 60 hertz electrical systems only.

1) Product number. (No finish specification required.)

Specification Tips • A task light may be of equal or less width than the unit to which it is attached but may not span across adjacent units. • Task lights may be adjusted front-to-back. • If task light is less than the width of the unit to which it is attached, it may also be adjusted side-to-side. • Attaches to Adaptable, UniGroup, PLACES and OneTouch overhead and shelves. • Attaches to counter tops and must be specified one width smaller than countertop width.

276

April 2008 / USA

Class CA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

Batwing Lens Specification: To specify, replace P with B in the product number and add $15 list. Example: LUTS-0030-16UEB

Chicago Specification: To specify, replace 1 with C in the product number and add $71 list. Example: LUTS-0030-C6UEP Chicago only: Plug includes 3 AMP resetable circuit breaker.

9′ Cord Option To specify, replace 6 with 9 and add $31 list. Example: LUTS-0030-19UEP

UniGroup Too Price List

Task Lighting for use with UniGroup Too, UniGroup, PLACES

Adaptable Electronic Ballast Task Light (Starter Light)

Height

Depth

Width

Description

Number

Price

1 3/8′′(35mm)

4 1/4′′(108mm)

42′′(1067mm)

6′ Cord - Prismatic Lens 9′ Cord - Prismatic Lens 6′ Cord - Prismatic Lens 9′ Cord - Prismatic Lens

LUTR-0042-16UEP LUTR-0042-14UEP LUTR-0054-16UEP LUTR-0054-19UEP

$203 234 $218 249

54′′(1372mm)

LUTR

C

R

US

Features

To Order, Specify:

• Includes mounting brackets, .33′′(8mm) diameter black 3-prong power cord, prismatic or batwing lens, low mercury content, and T-8 fluorescent lamp with 3500K color temperature. • Wired to accommodate the addition of add-on task light. • Cord is factory installed on right side; may be field-installed on the left-hand side. • Provides task lighting beneath overhead storage units. • For use with 120 volt 60 hertz electrical systems only.

1) Product number. (No finish specification required.)

Batwing Lens Specification: To specify, replace P with B in the product number and add $15 list. Example: LUTR-0042-16UEB

Specification Tips • A task light may be of equal or less width than the unit to which it is attached but may not span across adjacent units. • Task lights may be adjusted front-to-back on metal shelf hanger bars. • If task light is less than the width of the unit to which it is attached, it may also be adjusted side-to-side. • A maximum of 5 task lights may be daisy chained together including the starter light and/or not to exceed 20′ of overall task light run. • Attaches to Adaptable, UniGroup, PLACES and OneTouch overheads and shelves.

Adaptable Electronic Ballast Task Light (Add-On Light)

1 3/8′′(35mm)

4 1/4′′(108mm)

42′′(1067mm) 54′′(1372mm)

LUTD

C

R

15′′ Linking Cord - Prismatic Lens 48′′ Linking Cord - Prismatic Lens 15′′ Linking Cord - Prismatic Lens 48′′ Linking Cord - Prismatic Lens

Features

To Order, Specify:

• Includes mounting brackets, linking power cord, prismatic or batwing lens, low mercury content, and T-8 fluorescent lamp with 3500k color temperature. • Provides task lighting beneath overhead storage units. • For use with 120 volt 60 hertz electrical systems only.

1) Product number. (No finish specification required.)

US

Specification Tips NOTE: Must be attached to a starter light or another add-on light.

LUTD-0042-11UEP LUTD-0042-14UEP LUTD-0054-11UEP LUTD-0054-14UEP

• A task light may be of equal or less width than the unit to which it is attached but may not span across adjacent units. • Task lights may be adjusted front-to-back on metal shelf hanger bars. • If task light is less than the width of the unit to which it is attached, it may also be adjusted side-to-side. • A maximum of 5 task lights may be daisy chained together including the starter light and/or not to exceed 20′ of overall task light run. • Choose add-on light with appropriate linking cord length so as not to have excess cord. • Attaches to Adaptable, UniGroup, PLACES and OneTouch overheads and shelves.

$203 214 $218 229

Batwing Lens Specification: To specify, replace P with B in the product number and add $15 list. Example: LUTD-0042-11UEB

Starter Light

Add-On Lights Linking Cord

Class CA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

277

UniGroup Too Price List

Tack Strips/Tackboards for use with UniGroup Too, UniGroup, PLACES

Tack Strip

Height

Thickness Width

Number

Fabric Grade A B

C

D

E

F

G

5′′(127mm)

1′′(25mm)

HTB-2405 HTB-3005 HTB-3605 HTB-4205 HTB-4805 HTB-5405 HTB-6005

$112 116 121 125 133 152 155

$141 145 150 154 162 178 184

$149 153 158 162 170 193 196

$154 158 163 167 175 194 197

$159 163 168 172 180 199 202

$164 168 173 177 185 204 207

$199 213 299 $204 218 302 $208 224 310 $214 235 324 $229 242 336 $257 270 366 $259 273 373

$204 226 321 $209 230 324 $213 236 332 $219 247 346 $234 254 358 $262 278 388 $264 281 395

HTB

24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm)

$126 130 135 139 147 167 169

Features

To Order, Specify:

• Includes tack strip and attachment hardware. • HTB tack strips can be applied to all panel surface types except PLACES monolithic high performance panel. • Tack strip to be installed on one or more panels of equivalent widths when designated tack area is required or can be mounted to wall track.

1) Product number. 2) Fabric surface and color.

Available on RUSH.

Tackboard

HTB

11′′(279mm) 1′′(25mm) 16′′(406mm) 33′′(838mm) 11′′(279mm) 16′′(406mm) 33′′(838mm) 11′′(279mm) 16′′(406mm) 33′′(838mm) 11′′(279mm) 16′′(406mm) 33′′(838mm) 11′′(279mm) 16′′(406mm) 33′′(838mm) 11′′(279mm) 16′′(406mm) 33′′(838mm) 11′′(279mm) 16′′(406mm) 33′′(838mm)

24′′(610mm)

30′′(762mm)

36′′(914mm)

42′′(1067mm)

48′′(1219mm)

54′′(1372mm)

60′′(1524mm)

HTB-2411 HTB-2416 HTB-2433 HTB-3011 HTB-3016 HTB-3033 HTB-3611 HTB-3616 HTB-3633 HTB-4211 HTB-4216 HTB-4233 HTB-4811 HTB-4816 HTB-4833 HTB-5411 HTB-5416 HTB-5433 HTB-6011 HTB-6016 HTB-6033

$148 162 208 $152 166 211 $156 172 219 $162 183 233 $177 190 245 $201 214 275 $203 217 282

$162 176 222 $166 180 225 $170 186 233 $176 197 247 $191 204 259 $217 230 293 $219 233 300

April 2008 / USA

$189 203 255 $193 207 258 $197 213 266 $203 224 280 $218 231 292 $247 260 334 $249 263 341

Features

To Order, Specify:

• Includes tackboard and attachment hardware. • HTB tackboards can be applied to all panel surface types except PLACES monolithic high performance panel. • Tackboard to be installed on one or more panels of equivalent widths when designated tack area required or can be mounted to wall track.

1) Product number.

Available on RUSH.

278

$179 193 242 $183 197 245 $187 203 253 $193 214 267 $208 221 279 $237 250 317 $239 253 324

Class BA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

$194 208 277 $199 213 280 $203 219 288 $209 230 302 $224 237 314 $252 265 344 $254 268 351

2) Fabric surface and color.

UniGroup Too Price List

Tack Strips/Tackboards for use with PLACES Monolithic High Performance Acoustical Panels Only Height

Thickness Width

Tack Strip — Monolithic High- 5′′(127mm) 1′′(25mm) Performance Acoustical Panels

HTB-H

Tackboard — Monolithic HighPerformance Acoustical Panels

HTB-H

24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm)

Number

Fabric Grade A B

C

D

E

F

G

HTB-2405-H HTB-3005-H HTB-3605-H HTB-4205-H HTB-4805-H HTB-5405-H HTB-6005-H

$127 131 136 140 148 167 170

$156 160 165 169 177 193 199

$164 168 173 177 185 208 211

$169 173 178 182 190 209 212

$174 178 183 187 195 214 217

$179 183 188 192 200 219 222

$214 228 314 $219 233 317 $223 239 325 $229 250 339 $244 257 351 $272 285 381 $274 288 388

$219 241 336 $224 245 339 $228 251 347 $234 262 361 $249 269 373 $277 293 403 $279 296 410

$141 145 150 154 162 182 184

Features

To Order, Specify:

• Includes tack strip and attachment hardware to accommodate monolithic high-performance acoustical panels. • HTB-H tack strips are for use with high-performance acoustical panels only.

1) Product number.

11′′(279mm) 1′′(25mm) 16′′(406mm) 33′′(838mm) 11′′(279mm) 16′′(406mm) 33′′(838mm) 11′′(279mm) 16′′(406mm) 33′′(838mm) 11′′(279mm) 16′′(406mm) 33′′(838mm) 11′′(279mm) 16′′(406mm) 33′′(838mm) 11′′(279mm) 16′′(406mm) 33′′(838mm) 11′′(279mm) 16′′(406mm) 33′′(838mm)

24′′(610mm)

30′′(762mm)

36′′(914mm)

42′′(1067mm)

48′′(1219mm)

54′′(1372mm)

60′′(1524mm)

HTB-2411-H HTB-2416-H HTB-2433-H HTB-3011-H HTB-3016-H HTB-3033-H HTB-3611-H HTB-3616-H HTB-3633-H HTB-4211-H HTB-4216-H HTB-4233-H HTB-4811-H HTB-4816-H HTB-4833-H HTB-5411-H HTB-5416-H HTB-5433-H HTB-6011-H HTB-6016-H HTB-6033-H

$163 177 223 $167 181 226 $171 187 234 $177 198 248 $192 205 260 $216 229 290 $218 232 297

2) Fabric surface and color.

$177 191 237 $181 195 240 $185 201 248 $191 212 262 $206 219 274 $232 245 308 $234 248 315

$194 208 257 $198 212 260 $202 218 268 $208 229 282 $223 236 294 $252 265 332 $254 268 339

$204 218 270 $208 222 273 $212 228 281 $218 239 295 $233 246 307 $262 275 349 $264 278 356

Features

To Order, Specify:

• Includes tackboard and attachment hardware. • HTB-H tackboards are for use with high-performance acoustical panels only.

1) Product number.

Class BA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

$209 223 292 $214 228 295 $218 234 303 $224 245 317 $239 252 329 $267 280 359 $269 283 366

2) Fabric surface and color.

April 2008 / USA

279

UniGroup Too Price List

Markerboards/Wall Accessory Slat Pad for use with UniGroup Too, UniGroup, PLACES

Markerboard — Non-Magnetic Surface

MEAM

ClassCA HNAM

Class BA

Height

Depth

Width

Number

Price

16′′(406mm)

3 1/4′′(83mm)

23 1/8′′(587mm)

3 1/4′′(83mm)

48 1/8′′(1222mm)

3 1/4′′(83mm)

30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 60′′(1524mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 60′′(1524mm) 60′′(1524mm)

MEAM-3016 MEAM-3616 MEAM-4216 MEAM-4816 MEAM-6016 HNAM-3023 HNAM-3623 HNAM-4223 HNAM-4823 HNAM-6023 HNAM-6048

$250 263 280 296 313 $301 320 344 363 385 $526

Features

To Order, Specify:

• Includes markerboard, tray, four dry erase markers and one eraser. • White erasable writing surface with tray for storage of dry erase markers and eraser. • Non-magnetic. • Tray is standard in charcoal and edge is standard in white finish colors. • Markerboard cleaner and conditioner, order ePart #7031-7001. • May be used on wall track.

1) Product number. (No finish specification required.)

Available on RUSH.

Markerboard — Magnetic Surface

HMB

Class BA

Wall Accessory Slat Pad

HGRY

28′′(711mm)

3 7/16′′(87mm)

52′′(1321mm)

3 7/16′′(87mm)

30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm)

Features

To Order, Specify:

• Includes markerboard, tray, four dry erase markers and one eraser. • White porcelain erasable writing surface with tray for storage of dry erase markers and eraser. • Shipped completely assembled. • Magnetic. • Markerboard cleaner and conditioner, order ePart #7031-7001. • May be used on wall track.

1) Product number. 2) Trim color.

Width

Number

Price

16′′(406mm)

24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm)

HGRY-2416 HGRY-3016 HGRY-3616 HGRY-4216 HGRY-4816 HGRY-5416 HGRY-6016

$186 207 230 254 277 288 301

Features

To Order, Specify:

• Includes one pad, end caps and attachment brackets. • Assembled slat pad thickness is 3/8′′(10mm).

1) Product number.

Specification Tips • Attaches to a UniGroup Too, UniGroup or PLACES panel or a combination of panels that equal the pad width. • Designed to work with Jump Stuff slat pad tools. • Can be mounted under a shelf or overhead storage unit. • Intended to provide paper management capabilities. • May be used on wall track.

April 2008 / USA

$520 543 584 608 649 671 $617 663 725 785 842

Height

Class BA

280

HMB-3028 HMB-3628 HMB-4228 HMB-4828 HMB-5428 HMB-6028 HMB-3652 HMB-4252 HMB-4852 HMB-5452 HMB-6052

SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

2) Trim color. $24 upcharge (list) for Metallic trim color.

UniGroup Too Price List

Jump Stuff Slat Pad Tools for use with UniGroup Too, UniGroup, PLACES

Binder Bin

Height

Depth

Width

Number

Price

12 1/2′′(318mm)

10 1/2′′(267mm)

6 1/2′′(165mm)

DTSB-3

$39

Features

To Order, Specify:

• Mounts on slat pad. Can also be used in freestanding applications. • Bin accommodates two 3′′(76mm) thick binders.

1) Product number. 2) Translucent trim color.

DTSB-3

Tote

DTTE-3

Tack Strip

Height

Depth

Width

10′′(254mm)

4′′(102mm)

13′′(330mm)

Description Tote Tote, clips, and strap

Number

Price

DTTE-3 DTTH-3

$46 65

Features

To Order, Specify:

• • • •

1) Product number.

Mounts on slat pad. Clip and strap standard in black. Fits in lateral files. Accommodates hanging files.

2) Translucent trim color.

DTTH-3

Height

Depth

Width

Number

Price

2 1/2′′(64mm)

1/2′′(13mm)

12′′(305mm) 24′′(610mm)

DTTS-12 DTTS-24

$23 28

Features

To Order, Specify:

• Mounts on slat pad. • Brown and black cork and rubber composite material.

1) Product number.

Features

To Order, Specify:

• Includes two flex arms, two base clips, assortment of three tops (one grip clip, one round top, and one flower top) and two stick-on clips. • Mounts on slat pad to display miscellaneous notes/items or anywhere with stick-on clips. • Stick-on clips include double-sided tape.

1) Product number.

2) Trim color for bracket.

DTTS-12 DTTS-24

DTGK-3

Gooseneck Kit

$50

2) Translucent trim color.

DTGK-3

Mini Shelf

DMSP

1 3/4′′(44mm)

6 1/4′′(159mm)

18′′(457mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm)

DMSP-18 DMSP-24 DMSP-30 DMSP-36 DMSP-42 DMSP-48

Features

To Order, Specify:

• • • •

1) Product number.

Includes shelf and brackets. Mounts on slat pad. Shelf thickness 3/4′′(19mm) Designed for lightweight accessories.

Class YA – SIN 711-2; Discount Group XIII Canadian Conversion Factor: Refer to haworth.com/Canada

$82 84 86 88 93 96

2) Vinyl shelf color. 3) Trim color for bracket.

April 2008 / USA

281

UniGroup Too Price List

Jump Stuff Slat Pad Tools for use with UniGroup Too, UniGroup, PLACES

Phone Shelf

Height

Depth

Width

Number

Price

2 1/2′′(64mm)

11 1/4′′(286mm)

9′′(229mm)

DTPT-3

$53

Features

To Order, Specify:

• Includes phone shelf and bracket. • Mounts on slat pad at 30° angle. • Supports maximum of two reams (ten pounds/4.6 kilograms) of paper.

1) Product number. 2) Translucent trim color. 3) Trim color for bracket.

DTPT-3

Phone Shelf Bracket

1 1/2′′(38mm)

11′′(279mm)

7 1/2′′(191mm)

DTBS-3

Feature

To Order, Specify:

• Used to convert DTPT-1 for mounting rail phone shelf to slat pad.

1) Product number.

$39

2) Trim color for bracket.

DTBS-3

Personal Shelf

1 3/4′′(44mm)

11′′(279mm)

8′′(203mm)

DTES-3

Features

To Order, Specify:

• • • •

1) Product number.

Includes mounting bracket and personal shelf. Mounts on rail at 60° angle or horizontally. Can also be used as a horizontal freestanding tray. Supports maximum of two reams (ten pounds/4.6 kilograms) of paper.

$30

2) Translucent trim color. 3) Trim color for bracket.

DTES-3

DTAR-3

Personal Shelf Bracket Feature

To Order, Specify:

• Used in combination with DTPR-3 or DTES-3 for mounting rail personal shelf or paper sorter to slat pad.

1) Product number.

$18

2) Trim color for bracket.

DTAR-3

Paper Sorter

9 1/4′′(235mm)

11′′(279mm)

9′′-12′′(229mm-305mm)

Features

To Order, Specify:

• • • •

1) Product number.

Includes three dividers, one shelf, and mounting bracket. Mounts on slat pad. Can also be used as a horizontal freestanding tray. Supports maximum of two reams (ten pounds/4.6 kilograms) of paper.

DTPR-3

282

April 2008 / USA

DTPR-3

Class YA – SIN 711-2; Discount Group XIII Canadian Conversion Factor: Refer to haworth.com/Canada

2) Translucent trim color. 3) Trim color for bracket.

$44

UniGroup Too Price List

Jump Stuff Rail and Slat Pad Tools for use with UniGroup Too, UniGroup, PLACES

Tool Cup

Height

Depth

Width

Number

Price

5 1/2′′(140mm)

3 1/2′′(89mm)

4′′(102mm)

DTWC-2

$16

Feature

To Order, Specify:

• Mounts on rail and slat pad. Can also be used in freestanding applications.

1) Product number. 2) Translucent trim color.

DTWC-2

Letter Tray

2 1/2′′(64mm)

12′′(305mm)

10 1/2′′(267mm)

DTLT-2

Features

To Order, Specify:

• • • •

1) Product number.

Mounts on rail at 60° angle or horizontally. Mounts on slat pad horizontally. Can also be used in freestanding applications. Use Letter Tray Stacking Brackets (DTLS-2) to convert to stacking letter trays. • Supports maximum of one ream (five pounds/2.3 kilograms) of paper.

$19

2) Translucent trim color.

DTLT-2

Class YA – SIN 711-2; Discount Group XIII Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

283

UniGroup Too Price List

Jump Stuff Work Style Kits — Slat Pad Mounted for use with UniGroup Too, UniGroup, PLACES

File Master Kit

Mounting System

Slat Pad Width

Packaging

Number

Price

Slat Pad Slat Pad

69′′(1753mm)

Pre-Packaged Bulk-Packaged

DPKP-S DBKP-S

$363 318

Features

To Order, Specify:

• Kit includes gooseneck kit, two paper sorters, two letter trays, phone shelf, tote, tool cup, and binder bin. • Mounts on separately specified slat pad. • Ships either pre-packaged or bulk-packaged. • Bulk-packaged offers reduced list price, and ships with each set of parts packaged in separate cartons.

1) Product number. 3) Trim color for brackets.

Note: Minimum 10 kits required to order as bulk-packaged.

DPKP-S DBKP-S

Task Master Kit

Slat Pad Slat Pad

51′′(1295mm)

Pre-Packaged Bulk-Packaged

To Order, Specify:

• Kit includes gooseneck kit, paper sorter, two letter trays, phone shelf, tote, two grip clips, two pile dividers, and tool cup. • Mounts on separately specified slat pad. • Ships either pre-packaged or bulk-packaged. • Bulk-packaged offers reduced list price, and ships with each set of parts packaged in separate cartons.

1) Product number.

Note: Minimum 10 kits required to order as bulk-packaged.

Mini Master Kit

Slat Pad Slat Pad

DPKS-S DBKS-S

49′′(1245mm)

Pre-Packaged Bulk-Packaged

3) Trim color for brackets.

DPKS-S DBKS-S

To Order, Specify:

• Kit includes gooseneck kit, paper sorter, two letter trays, phone shelf, and tool cup. • Mounts on separately specified slat pad. • Ships either pre-packaged or bulk-packaged. • Bulk-packaged offers reduced list price, and ships with each set of parts packaged in separate cartons.

1) Product number.

Class YA – SIN 711-2; Discount Group XIII Canadian Conversion Factor: Refer to haworth.com/Canada

$355 311

2) Translucent trim color.

Features

Note: Minimum 10 kits required to order as bulk-packaged.

April 2008 / USA

DPKT-S DBKT-S

Features

DPKT-S DBKT-S

284

2) Translucent trim color.

2) Translucent trim color. 3) Trim color for brackets.

$222 196

UniGroup Too Price List

Jump Stuff Freestanding Tools for use with UniGroup Too, UniGroup, PLACES

Waste Bin

Height

Depth

Width

15 1/2′′(394mm)

12′′(305mm)

13′′(330mm)

Description

Number

Price

Black

DTRB-1B DTRB-1

$37 49

Features

To Order, Specify:

• Used in freestanding applications. • Five gallon capacity.

1) Product number. 2) Translucent trim color.

DTRB

Letter Tray Stacking Kit

Height

Depth

Width

8′′(203mm)

12′′(305mm)

10 1/2′′(267mm)

Number

Price

DTLS-2

$50

Features

To Order, Specify:

• Includes three letter trays and two stacking brackets. • Used in freestanding applications.

1) Product number. 2) Translucent trim color.

DTLS-2

Letter Tray Stacking Bracket

2 1/4′′(57mm)

5′′(127mm)

9 1/2′′(241mm)

DTSB-1

Features

To Order, Specify:

• Includes two stacking brackets. • Used in freestanding applications.

1) Product number.

$13

2) Translucent trim color.

DTSB-1

DTHT-1

Tote Strap

$21

Features

To Order, Specify:

• • • •

1) Product number. (No finish specification required.)

Includes strap and two clips. Strap is 27′′(686mm) long and non-adjustable. Converts DTTE-3 to DTTH-3. Standard in black.

DTHT-1

Class YA – SIN 711-2; Discount Group XIII Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

285

UniGroup Too Price List

Jump Stuff Rail Mounting Systems for use with UniGroup Too, UniGroup, PLACES

Panel Mount Rail

Height

Depth

Width

Description

Number

Price

4 1/2′′(114mm)

7′′(178mm)

24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 60′′(1524mm)

Two Supports

DSR-24-H DSR-30-H DSR-36-H DSR-42-H DSR-48-H DSR-60-H

$69 72 82 86 88 97

DSR-H

Features

To Order, Specify:

• Includes two supports, one rail with two end caps. • Mounts to Enhanced PREMISE, PLACES and UniGroup panel side rails to support rail tools. • Rail tools ordered separately. • Rail is standard in brushed aluminum.

1) Product number. 2) Metallic trim color for rail supports only.

Specification Tips • Supports maximum load of 50 pounds (23kg), evenly distributed. • Can be mounted on Haworth wall track. • Can span one or more panels equivalent to rail width. • Mounts approximately 18′′(457mm) below overhead storage units and 7′′(178mm) above worksurfaces. • Rail should not be mounted directly in front of tackboards. Note: No more than 12′′(305mm) of rail can be extended beyond outside of support.

Worksurface Mount Rail

DSR-W

7′′(178mm)

7′′(178mm)

24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 60′′(1524mm)

One Support Two Supports

Features

To Order, Specify:

• Includes support(s) with mounting clamp(s) and one rail with two end caps. • Mounts to worksurface to support rail tools. • Mounts on worksurfaces from 3/4′′(19mm) to 1 3/4′′(44mm) thick. With minimum of 1/4′′(6mm) of clearance depth does not require worksurface removal. • Rail tools ordered separately. • Rail is standard in brushed aluminum.

1) Product number.

Specification Tips • Single support holds up to a maximum of 25 pounds (11kg), evenly distributed. Double support holds up to a maximum of 50 pounds (23kg), evenly distributed. • Can be installed off modular. • Rail should not be mounted directly in front of tackboards. • Under worksurface 4′′(102mm) of clearance is necessary between back of worksurface and pedestal for clamp. Note: No more than 12′′(305mm) of rail can be extended beyond outside of support.

286

April 2008 / USA

DSR-24-W DSR-30-W DSR-36-W DSR-42-W DSR-48-W DSR-60-W

Class YA – SIN 711-2; Discount Group XIII Canadian Conversion Factor: Refer to haworth.com/Canada

$130 133 $143 147 149 158

2) Metallic trim color for rail supports only.

UniGroup Too Price List

Jump Stuff Rail Mounting Systems for use with UniGroup Too, UniGroup, PLACES

Wall Mount Rail

Height

Depth

Width

Description

Number

Price

4 1/2′′(114mm)

7′′(178mm)

24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 60′′(1524mm)

Two Supports

DSR-24-L DSR-30-L DSR-36-L DSR-42-L DSR-48-L DSR-60-L

$ 87 90 100 104 106 115

DSR-L

Features

To Order, Specify:

• • • • •

1) Product number.

Includes two supports, one rail with two end caps. Mounts to wall to support rail tools. Must be mounted on wall at stud locations. Rail tools ordered separately. Supports maximum load of 50 pounds (23kg), evenly distributed. • Rail is standard in brushed aluminum.

2) Metallic trim color for rail supports only.

Note: No more than 12′′(305mm) of rail can be extended beyond outside of support.

Freestanding Mount Rail

DSR-F

7′′(178mm)

9′′(229mm)

24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 60′′(1524mm)

Two Supports

DSR-24-F DSR-30-F DSR-36-F DSR-42-F DSR-48-F DSR-60-F

Features

To Order, Specify:

• Includes two supports with feet, one rail with two end caps. • Freestanding mount rail supports rail tools on most flat surfaces. • Rail tools ordered separately. • Supports maximum load of 50 pounds (23kg), evenly distributed. • Rail is standard in brushed aluminum.

1) Product number.

$161 164 174 178 180 189

2) Metallic trim color for rail supports only.

Note: No more than 12′′(305mm) of rail can be extended beyond outside of support.

Class YA – SIN 711-2; Discount Group XIII Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

287

UniGroup Too Price List

Jump Stuff Rail Tools for use with UniGroup Too, UniGroup, PLACES

Phone Shelf

DTPT-1

Height

Depth

Width

Number

Price

3′′(76mm)

11′′(279mm)

9′′(229mm)

DTPT-1

$53

Features

To Order, Specify:

• Mounts on rail at 30° angle. • Supports maximum of two reams (ten pounds/4.6 kilograms) of paper.

1) Product number.

11′′(279mm)

Personal Shelf

DTES-1

Paper Sorter

2) Translucent trim color.

8′′(203mm)

DTES-1

Features

To Order, Specify:

• Mounts on rail at 60° angle or horizontally. • Can also be used as a horizontal freestanding tray. • Supports maximum of two reams (ten pounds/4.6 kilograms) of paper.

1) Product number.

9′′(229mm)

11′′(279mm)

2) Translucent trim color.

9′′-12′′(229mm-305mm)

DTPR-1

Features

To Order, Specify:

• • • •

1) Product number.

Includes three dividers and one shelf. Mounts horizontally on rail. Can also be used as a horizontal freestanding tray. Supports maximum of two reams (ten pounds/4.6 kilograms) of paper.

$30

$44

2) Translucent trim color.

DTPR-1

Pile Master Kit

Packaging

Number

Price

Pre-Packaged

DPKY-1

$223

Features

To Order, Specify:

• Kit includes ten pile dividers. • Requires no mounting rail.

1) Product number.

DPKY-1

288

April 2008 / USA

Class YA – SIN 711-2; Discount Group XIII Canadian Conversion Factor: Refer to haworth.com/Canada

2) Translucent trim color.

UniGroup Too Price List

Jump Stuff Rail Work Style Kits for use with UniGroup Too, UniGroup, PLACES

Team Master Kit

DPKC-48 DBKC-48

File Master Kit

DPKP-48 DBKP-48

Mounting System

Packaging

Number

Price

Panel Mount* Worksurface Mount Wall Mount Freestanding Mount Panel Mount* Worksurface Mount Wall Mount Freestanding Mount

Pre-Packaged

DPKC-48-H DPKC-48-W DPKC-48-L DPKC-48-F DBKC-48-H DBKC-48-W DBKC-48-L DBKC-48-F

$533 679 554 641 $452 574 473 544

Bulk-Packaged

Feature

To Order, Specify:

• Kit includes gooseneck kit, paper sorter, file frame, two pile dividers, disk box, phone caddy, sketch pad kit, 2-way display, catch-all tray, wire wraps, and one 48′′(1219mm) wide rail mount with appropriate supports.

1) Product number.

Panel Mount* Worksurface Mount Wall Mount Freestanding Mount Panel Mount* Worksurface Mount Wall Mount Freestanding Mount

Pre-Packaged

Bulk-Packaged

2) Translucent trim color. 3) Metallic trim color for rail supports only.

DPKP-48-H DPKP-48-W DPKP-48-L DPKP-48-F DBKP-48-H DBKP-48-W DBKP-48-L DBKP-48-F

Feature

To Order, Specify:

• Kit includes 2-way tray, two paper sorters, phone caddy, gooseneck kit, sketch pad kit, file frame, catch-all tray, and one 48′′(1219mm) wide mounting rail with appropriate supports.

1) Product number.

$450 596 471 558 $391 513 412 499

2) Translucent trim color. 3) Metallic trim color for rail supports only.

Available on RUSH.

Task Master Kit

DPKT-48 DBKT-48

Panel Mount* Worksurface Mount Wall Mount Freestanding Mount Panel Mount* Worksurface Mount Wall Mount Freestanding Mount

Pre-Packaged

Bulk-Packaged

DPKT-48-H DPKT-48-W DPKT-48-L DPKT-48-F DBKT-48-H DBKT-48-W DBKT-48-L DBKT-48-F

Feature

To Order, Specify:

• Kit includes gooseneck kit, two grip clips, paper sorter, file frame, two pile dividers, disk box, catch-all tray, 3-layer tray, sketch pad kit, phone caddy, wire wraps, and one 48′′(1219mm) wide mounting rail with appropriate supports.

1) Product number.

$520 675 541 628 $463 586 484 571

2) Translucent trim color. 3) Metallic trim color for rail supports only.

Available on RUSH.

Common Features • Ships either pre-packaged or bulk-packaged. • Pre-packaged ships in two cartons, one for rail system and one for tools. • Bulk-packaged offers reduced list price, and ships with each set of parts packaged in separate cartons. Note: Minimum 10 kits required to order as bulk-packaged.

Class YA – SIN 711-2; Discount Group XIII Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

289

UniGroup Too Price List

Jump Stuff Rail Work Style Kits for use with UniGroup Too, UniGroup, PLACES

Mini Master Kit

DPKS DBKS

Mounting System

Rail Width

Packaging

Number

Price

Panel Mount Worksurface Mount Wall Mount Freestanding Mount Panel Mount Worksurface Mount Wall Mount Freestanding Mount Panel Mount Worksurface Mount Wall Mount Freestanding Mount Panel Mount Worksurface Mount Wall Mount Freestanding Mount

36′′(914mm)

Pre-Packaged

36′′(914mm)

Bulk-Packaged

48′′(1219mm)

Pre-Packaged

48′′(1219mm)

Bulk-Packaged

DPKS-36-H DPKS-36-W DPKS-36-L DPKS-36-F DBKS-36-H DBKS-36-W DBKS-36-L DBKS-36-F DPKS-48-H DPKS-48-W DPKS-48-L DPKS-48-F DBKS-48-H DBKS-48-W DBKS-48-L DBKS-48-F

$321 458 339 423 $285 405 302 376 $321 463 342 429 $291 413 312 399

Feature

To Order, Specify:

• Kit includes paper sorter, catch-all tray, 2-way tray, gooseneck kit, phone caddy and one 36′′(914mm) or 48′′(1219mm) wide mounting rail with appropriate supports.

1) Product number.

Available on RUSH.

Common Features • Ships either pre-packaged or bulk-packaged. • Pre-packaged ships in two cartons, one for rail system and one for tools. • Bulk-packaged offers reduced list price, and ships with each set of parts packaged in separate cartons. Note: Minimum 10 kits required to order as bulk-packaged.

290

April 2008 / USA

Class YA – SIN 711-2; Discount Group XIII Canadian Conversion Factor: Refer to haworth.com/Canada

2) Translucent trim color. 3) Metallic trim color for rail supports only.

UniGroup Too Price List

Wire Grid System and Accessories for use with UniGroup Too, UniGroup, PLACES

Grid

Height

Depth

Width

Number

Price

12′′(305mm)

1 1/4′′(32mm)

16′′(406mm)

1 1/4′′(32mm)

24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm) 24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 54′′(1372mm) 60′′(1524mm)

HGR-2412 HGR-3012 HGR-3612 HGR-4212 HGR-4812 HGR-5412 HGR-6012 HGR-2416 HGR-3016 HGR-3616 HGR-4216 HGR-4816 HGR-5416 HGR-6016

$112 121 129 136 143 153 162 $121 129 136 143 151 159 172

HGR

Mailbox

Features

To Order, Specify:

• Grid attaches to panel side rails of corresponding widths or wall track. • Grid holds optional accessories. • 12′′(305mm)-high grid is for under counter applications when mounted on a minimum 44′′(1116mm)-high panel. Has 5 horizontal rails. • 16′′(406mm)-high grid is for placement under shelf or overhead storage unit above worksurface. Has six horizontal wires. • Vertical brackets at each end of grid provide wire channels for management of task light power cord from fixture to worksurface. • Can span two panels.

1) Product number.

12 1/2′′(318mm)

10 3/4′′(273mm)

Grid mount

2) Trim color.

HGMB-0002

Features

To Order, Specify:

• • • • •

1) Product number.

Includes two trays and required hardware. For grid mount applications. Spacing between shelves is 3′′(76mm). Field assembly of grid support hardware required. Not applicable for mounting on 24′′(610mm)-wide grid.

$111

2) Trim color.

HGMB-0002

Reference Tray

10 3/4′′(273mm)

13′′(330mm)

Grid mount

HGRT-0001

Features

To Order, Specify:

• • • •

1) Product number.

Includes one tray. For grid mount applications. Requires field assembly. Holds 5 lbs (2.3kg) maximum weight.

$108

2) Trim color.

HGRT-0001

Class BA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

291

UniGroup Too Price List

Wire Grid System and Accessories for use with UniGroup Too, UniGroup, PLACES

Diskette Bin

Height

Depth

Width

Number

Price

3 1/2′′(89mm)

2 1/2′′(64mm)

6′′(152mm)

HGDB-0004

$126

Features

To Order, Specify:

• Includes four diskette bins. • Grid mount or freestanding. • For storing CD’s in jewel cases.

1) Product number. 2) Trim color.

HGDB-0004

Multi-Purpose Storage Bins

3 1/2′′(89mm)

3′′(76mm)

4′′(102mm) 8′′(203mm)

HGBN-0004 HGBN-0008

Features

To Order, Specify:

• Includes four storage bins of one size. • Hang from horizontal grid rails.

1) Product number.

$119 151

2) Trim color.

HGBN

Grid Tackstrip

3 1/2′′(89mm)

1/4′′(6mm)

24′′(610mm) 30′′(762mm)

Features

To Order, Specify:

• • • •

1) Product number.

Includes four tackstrips. For grid mount applications. Mounts between two horizontal grid rails. Cork is standard natural color only.

HGTS

292

April 2008 / USA

HGTS-0024 HGTS-0030

Class BA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

2) Bracket trim color.

$273 343

UniGroup Too Price List

Task Organization for use with UniGroup Too, UniGroup, PLACES

Paper Management Mounting Bar

PMMB

Height

Depth

Width

2′′(51mm)

1′′(25mm)

24′′(610mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 60′′(1524mm)

Description

Number

Price

PMMB-24 PMMB-30 PMMB-36 PMMB-42 PMMB-48 PMMB-60

$101 109 112 128 135 146

Features

To Order, Specify:

• Supports all types of panel-mounted paper management components of equivalent multiple widths. • Mounting bars on adjacent panels may be spanned by paper management accessories. • To be installed on one or more panels of equivalent bar width.

1) Product number. 2) Trim color.

Available on RUSH.

Diagonal Unit — Suspended

6 1/4′′(159mm)

11 1/2′′(292mm) 11 1/2′′(292mm)

6′′(152mm) 12′′(305mm)

Two dividers Four dividers

PMDU-6 PMDU-12

Features

To Order, Specify:

• Units designed to be hung on a mounting bar singly or in multiple quantities and may span two adjacent mounting bars. • Includes two or four dividers per unit as specified. • Field-adjusted for left- or right-hand orientation. • Includes frame, dividers and label holders.

1) Product number.

$ 68 134

2) Trim color.

Available on RUSH. PMDU

Diagonal Unit — Freestanding

6 1/4′′(159mm)

10 1/4′′(260mm) 10 1/4′′(260mm)

6′′(152mm) 12′′(305mm)

Two dividers Four dividers

PMDF-6 PMDF-12

Features

To Order, Specify:

• Unit may be used on any flat surface and for added security may store within an overhead storage unit. • Includes two or four dividers per unit as specified. • Field-adjusted for left- or right-hand orientation. • Includes frame, dividers and label holders.

1) Product number.

$ 68 134

2) Trim color.

PMDF

Horizontal Unit — Suspended

PMHU

6 1/4′′(159mm)

12 3/4′′(324mm) 12′′(305mm)

11′′(279mm) 13′′(330mm)

Front-to-back Side-to-side

PMHU-11 PMHU-13

Features

To Order, Specify:

• Unit designed to be hung from a mounting bar singly or in multiple quantities and may span mounting bars on adjacent panels. • Specify unit PMHU-11 for front-to-back paper storage or PMHU-13 for side-to-side paper storage. • Includes frame, two trays and label holders. • Unit has total capacity of six trays (see tray packages PMTP-11 or PMTP-13 on page 294).

1) Product number.

$121 136

2) Trim color.

Available on RUSH.

Class BA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

293

UniGroup Too Price List

Task Organization for use with UniGroup Too, UniGroup, PLACES Height Horizontal Unit — Freestanding 6 1/4′′(159mm)

PMHF

Vertical Unit — Suspended

Depth

Width

Description

Number

Price

11 1/2′′(292mm) 10 3/4′′(273mm)

11′′(279mm) 13′′(330mm)

Front-to-back Side-to-side

PMHF-11 PMHF-13

$113 128

Features

To Order, Specify:

• Units may be used on any flat surface and for added security may store within an overhead storage unit. • Units may be stacked vertically. • Specify unit PMHU-11 for front-to-back paper storage or PMHU-13 for side-to-side paper storage. • Includes frame, two trays and label holders. • Unit has total capacity of six trays (see tray packages PMTP-11 or PMTP-13 below).

1) Product number.

6 1/4′′(159mm)

12′′(305mm)

2) Trim color.

6′′(152mm)

PMVU-6

Features

To Order, Specify:

• Unit designed to be hung from a mounting bar singly or in multiple quantities and may span mounting bars on adjacent panels. • Includes frame and one tray. • Unit is designed to hold binders in an upright position. • To create small forms bins, specify 6′′(152mm) -wide tray package (PMTP-6).

1) Product number.

$70

2) Trim color.

PMVU-6

Vertical Unit — Freestanding

6 1/4′′(159mm)

10 3/4′′(273mm)

6′′(152mm)

PMVF-6

Features

To Order, Specify:

• Units may be used on any flat surface and for added security may store within an overhead storage unit. • Includes frame and one tray. • Unit is designed to hold binders in an upright position. • To create small forms bins, specify 6′′(152mm) -wide tray package (PMTP-6).

1) Product number.

$70

2) Trim color.

PMVF-6

Paper Management Tray Packages

PMTP-6

10 1/2′′(267mm)

5 1/2′′(140mm)

12 1/2′′(318mm)

10 1/2′′(267mm)

10 1/2′′(267mm)

12 1/2′′(318mm)

Vertical unit trays, set of five Front-to-back horizontal unit trays, set of four Side-to-side horizontal unit trays, set of four

PMTP-11

88

PMTP-13

88

To Order, Specify:

• Trays fit horizontal or vertical paper managers to increase numbers of storage slots. • Fits freestanding and suspended units.

1) Product number.

PMTP-13

April 2008 / USA

$83

Features

PMTP-11

294

PMTP-6

Class BA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

2) Trim color.

UniGroup Too Price List

Lighting – BRAZO™ for use with UniGroup Too, UniGroup, PLACES

BRAZO™

LBJ1

C

R

US

Class YA

Adaptable Electronic Ballast Task Light

LUTS-16UEP

C

R

US

Class CA

Base Diameter

Number

Price

8 1/2′′(216mm)

LBJ1-0026-16FLC

$657

Features

To Order, Specify:

• Includes base, adjustable height fixture, arm with LED lamp with clear lens, six foot removable silvertone cord. • Features a LED light source with full dim control knob and 90 degree disbursement adjustment. • 1.5 to 9 watts. • Arm rotates 360 degrees. • Adjustable height fixture range is 14′′-22′′(356mm-559mm) from desktop. • Arm is 26 1/2′′(673mm). • Standard in brushed aluminum. • Base includes scratch-resistant bottom cover with side cord location. • For use with 120 volt 60 hertz electrical system. • Can be used on any horizontal surface. • Minor assembly required. • Overall height range with arm extended at 180° is 33 3/4′′-41′′(857mm-1041mm). • Full dim control knob is located at end of arm.

1) Product number. (No finish specification required.)

Height

Depth

Width

Number

Price

1.375′′(25mm)

4 1/4′′(105mm)

24′′(610mm) 30′′(762mm) 42′′(1067mm) 54′′(1372mm)

LUTS-0024-16UEP LUTS-0030-16UEP LUTS-0042-16UEP LUTS-0054-16UEP

$162 169 185 198

Features

To Order, Specify:

• Includes mounting brackets, black power cord, prismatic lens, low mercury content, and T-8 optic fluorescent lamp with 3500K color temperature. • Six foot cord is factory installed on right side; may be field-installed on the left-hand side 42′′(1067mm) and 54′′(1372mm) units. • Nine foot cord is available as a specified option. • Provides task lighting beneath shelves or overhead storage units. • Available in charcoal only. • For use with 120 volt 60 hertz electrical systems only.

1) Product number. (No finish specification required.)

Specification Tips • A task light may be of equal or less width than the unit to which it is attached but may not span across adjacent units. • Task lights may be adjusted front-to-back. • If task light is less than the width of the unit to which it is attached, it may also be adjusted side-to-side. • Attaches to Adaptable, UniGroup, PLACES and OneTouch overhead and shelves. • Attaches to counter tops and must be specified one width smaller than countertop width.

SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

Batwing Lens Specification: To specify, replace P with B in the product number and add $15 list. Example: LUTS-0030-16UEB

Chicago Specification: To specify, replace 1 with C in the product number and add $71 list. Example: LUTS-0030-C6UEP Chicago only: Plug includes 3 AMP resetable circuit breaker.

9′ Cord Option To specify, replace 6 with 9 and add $31 list. Example: LUTS-0030-19UEP

April 2008 / USA

295

UniGroup Too Price List

Lighting — Jump Stuff for use with UniGroup Too, UniGroup, PLACES

Wing Light — Freestanding

DLWL-F

C

R

US

Base Diameter

Description

Number

Price

7 1/2′′(191mm)

Magnetic Light Electronic Light

DLWL-M-F DLWL-E-F

$416 458

Features

To Order, Specify:

• Includes 3500K, 13W low mercury content compact fluorescent lamp, mini rocker switch located under head, base, two-piece hinged arms and 6′(1829mm) cord with two prong plug. • For freestanding applications. • Head adjusts 4′′(102mm) to 18′′(457mm) above base and 6′′(152mm) to 17′′(432mm) in front of base. • Lamp head is white, arms are silver, fixture base, joints and cord are black. • In-line magnetic ballast, electronic ballast located in fixture head. • Arm pivots and head rotates 180° horizontally. • Asymmetric light distribution to reduce glare. • For use with 120 volt 60 hertz electrical systems.

1) Product number. (No finish specification required.)

Magnetic Light Electronic Light

Wing Light — Rail Mount

DLWL-R

C

R

US

Features

To Order, Specify:

• Includes 3500K, 13W low mercury content compact fluorescent lamp, mini rocker switch located under head, two-piece hinged arms and 6′(1829mm) cord with two prong plug. • Mounts to Jump Stuff work rail. • Head adjusts 4′′(102mm) to 18′′(457mm) above rail and 6′′(152mm) to 17′′(432mm) in front of rail. • Lamp head is white, arms are silver, joints and cord are black. • In-line magnetic ballast, electronic ballast located in fixture head. • Arm pivots and head rotates 180° horizontally. • Asymmetric light distribution to reduce glare. • For use with 120 volt 60 hertz electrical systems.

1) Product number. (No finish specification required.)

Magnetic Light Electronic Light

Wing Light — Under Shelf Mount

DLWL-U

C

R

US

C

R

296

US

April 2008 / USA

DLWL-M-U DLWL-E-U

Features

To Order, Specify:

• Includes 3500K, 13W low mercury content compact fluorescent lamp, mini rocker switch located under head, attachment hardware with single hinged arm, and 6′(1829mm) cord with two prong plug. • Mounts underneath Adaptable, PLACES, UniGroup, UniGroup Too, OneTouch and RACE overhead storage units and shelves. • Head adjusts up to 8′′(203mm) below shelf and up to 11′′(279mm) in front of shelf. • Lamp head is white, arms are silver, joints and cord are black. • In-line magnetic ballast, electronic ballast located in fixture head. • Arm pivots and head rotates 180° horizontally. • Asymmetric light distribution to reduce glare. • For use with 120 volt 60 hertz electrical systems.

1) Product number. (No finish specification required.)

Magnetic Light Electronic Light

Wing Light — Panel Mount

DLWL-H

DLWL-M-R DLWL-E-R

DLWL-M-H DLWL-E-H

Features

To Order, Specify:

• Includes 3500K, 13W low mercury content compact fluorescent lamp, mini rocker switch located under head, two-piece hinged arms and 6′(1829mm) cord with two prong plug. • Mounts to Enhanced PREMISE, PLACES, UniGroup, and UniGroup Too panel side rails. • Head adjusts 4′′(102mm) to 18′′(457mm) above base and 6′′(152mm) to 17′′(432mm) in front of base. • Lamp head is white, arms are silver, joints and cord are black. • In-line magnetic ballast, electronic ballast located in fixture head. • Arm pivots and head rotates 180° horizontally. • Asymmetric light distribution to reduce glare. • For use with 120 volt 60 hertz electrical systems.

1) Product number. (No finish specification required.)

Class YA – SIN 711-2; Discount Group XIII Canadian Conversion Factor: Refer to haworth.com/Canada

$384 426

$384 426

$384 426

UniGroup Too Price List

Pivot-Head Task Lighting for use with UniGroup Too, UniGroup, PLACES

Freestanding

HTL-0001-F

C

R

US

Height

Depth

Number

Price

17 1/2′′(444mm)

24′′(610mm)

HTL-0001-F

$302

Features

To Order, Specify:

• Base measures 8′′(203mm) in diameter. • Fits space between 29′′(737mm)-high worksurface and overhead storage unit or shelf hung 18′′(457mm) above worksurface. • Powered by a 72′′(1829mm) black cord. • Twin tube low mercury content 13-watt fluorescent lamp included. • Color temperature: 3500°K. • Fixture arm, base, and base cap are standard in charcoal color only. • Amp draw: .3 (18 watts, including ballast). • All models except freestanding pivot 180° at mounting bracket. • Pivoting head (350°). • Switch located under light reflector head. • Not for use with power sources other than 120 volt 60 hertz. • For use in the U.S.A. only.

1) Product number.

20′′(508mm)

Panel-Hung

HTL-0001-P

C

R

US

C

R

US

HTL-0001-P

Features

To Order, Specify:

• Bracket hangs from slots in panel side rail. • Bracket may be placed in left or right panel side rail. • Fits space between 29′′(737mm)-high worksurface and overhead storage unit or shelf hung 18′′(457mm) above worksurface. • Powered by a 72′′(1829mm) black cord. • Twin tube low mercury content 13-watt fluorescent lamp included. • Color temperature: 3500°K. • Fixture arm and mounting hardware are standard in charcoal color only. • Amp draw: .3 (18 watts, including ballast). • All models except freestanding pivot 180° at mounting bracket. • Pivoting head (350°). • Switch located under light reflector head. • Panel and grid field-mounting options may be changed by specifying additional mounting brackets separately, see page 298. • Not for use with power sources other than 120 volt 60 hertz. • For use in the U.S.A. only.

1) Product number.

20′′(508mm)

Grid-Mounted

HTL-0001-G

2) Lamp head trim color. TR-F Black TR-W White TR-E Smoke TR-1A Red

2) Lamp head trim color. TR-F Black TR-W White TR-E Smoke TR-1A Red

HTL-0001-G

Features

To Order, Specify:

• Mounts on 16′′(406mm)-high grid, anywhere along length. • Fits space between 29′′(737mm)-high worksurface and overhead storage unit or shelf hung 18′′(457mm) above worksurface. • Powered by a 72′′(1829mm) black cord. • Twin tube low mercury content 13-watt fluorescent lamp included. • Color temperature: 3500°K. • Fixture arm and mounting hardware are standard in charcoal color only. • Amp draw: .3 (18 watts, including ballast). • All models except freestanding pivot 180° at mounting bracket. • Pivoting head (350°). • Switch located under light reflector head. • Panel and grid field-mounting options may be changed by specifying additional mounting brackets separately, see page 298. • Not for use with power sources other than 120 volt 60 hertz. • For use in the U.S.A. only.

1) Product number.

Class BA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

$256

$275

2) Lamp head trim color. TR-F Black TR-W White TR-E Smoke TR-1A Red

April 2008 / USA

297

UniGroup Too Price List

Pivot-Head Task Lighting for use with UniGroup Too, UniGroup, PLACES

Panel-Hung Bracket

Number

Price

HTLB-0001-P

$24

Features

To Order, Specify:

• Allows grid-mounted task lights to be converted to panel-hung. • Price includes two brackets. • Standard in charcoal finish color only.

1) Product number. (No finish specification required.)

HTLB-0001-P

Grid-Mount Bracket

HTLB-0001-G

$24

Features

To Order, Specify:

• Allows panel-mounted task lights to be converted to grid-mounted. • Price includes two brackets. • Standard in charcoal finish color only.

1) Product number. (No finish specification required.)

HTLB-0001-G

298

April 2008 / USA

Class BA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

UniGroup Too Price List

X Series Attached Pedestals for use with UniGroup Too, UniGroup, PLACES

Box/Box/File — Attached

Actual Height

Actual Depth

Actual Width

27 1/2′′ (699mm)

17′′ (432mm)

15′′ (381mm)

27 1/2′′ (699mm)

27 1/2′′ (699mm)

JPAH-24

23′′ (584mm)

29′′ (737mm)

15′′ (381mm)

15′′ (381mm)

Description

Pull

Number 1 2

(S) Painted Price

Box/Box/File

1

JPAH-18-

1

$475

$493

$741

$764

JPAH-18JPAH-18JPAH-24-

1

543 559 $503

561

Box/Box/File

2, 3 7, 8, 9 1

809 825 $768

832 848 $792

Box/Box/File

2, 3 7, 8, 9 1

JPAH-24JPAH-24JPAH-30-

1

571 587 $554

836 852 $817

860 876 $843

File/File

2, 3 7, 8, 9 1

JPAH-30JPAH-30JPAJ-18-

1

622 638 $448

885 901 $697

911 927 $719

File/File

2, 3 7, 8, 9 1

JPAJ-18JPAJ-18JPAJ-24-

1

491 503 $472

740 752 $720

762 774 $743

File/File

2, 3 7, 8, 9 1

JPAJ-24JPAJ-24JPAJ-30-

1

515 527 $518

763 775 $765

786 798 $789

2, 3 7, 8, 9

JPAJ-30JPAJ-30-

808 820

832 844

File/File — Attached 27 1/2′′ (699mm)

27 1/2′′ (699mm)

17′′ (432mm)

23′′ (584mm)

15′′ (381mm)

15′′ (381mm)

JPAJ-24

2

Pull Styles

Ellipse

Radius

Taper

Crescent

Linear

Classic

27 1/2′′ (699mm)

29′′ (737mm)

15′′ (381mm)

Features

561 573

(K-N-Q) (W) (W) Painted Wood Wood Perf. Price Price I Price II

$521 589 $572 640 $481 524 $505 548 $551 594

To Order, Specify:

• Includes attachment hardware, one black pencil tray. • Box drawers include one divider; file drawers include one compressor. • Standard with lock; keyed alike and master keying options available. • Drawers interiors and accessories are black. • Attached units must be attached under a worksurface equal to or deeper than pedestal depth. • Optional drawer fronts include painted, painted perforated or wood. • Perforated option (with liner) available on the file drawer only. (Not available on box drawers or with Crescent, Linear and Classic pulls.) • Optional drawer pulls include Ellipse, Radius, Taper, Crescent, Linear and Classic pulls. • –Ellipse pull available in non-Metallic trim colors only. • –Radius pull available in Metallic trim colors only. • –Taper pull trim color matches case trim color. • –Crescent, Linear and Classic pulls are brushed nickel finish. Available on RUSH.

Painted Drawer Fronts 1) Product number, including:

1 Drawer Front Style: S

Painted

Painted Perforated file drawer front options K Meteors N Constellation Q Galaxy

2 Pull (see side bar) 2) Trim color for drawer fronts and case.* 3) Trim color for pull (Ellipse and Radius only). • –Ellipse (Non-Metallic trim colors only) • –Radius (Metallic trim colors only; upcharge for Metallic trim on pull is included in price.) 4) Trim color for lock plug.

Specification Tips • Specify pedestal accessories separately, as required. • See appropriate price book for specification requirements. • Use corner brackets and/or cantilevers to attach the worksurface to the panel. • Specify worksurface height adjustment kit if mounting worksurface up to 2′′(51mm) higher than standard mounting height; specify separately.

Wood Drawer Fronts 1) Product number, including:

1 Drawer Front Style: W Wood

2 Pull (see side bar) 2) Trim color for case.* 3) Trim color for pull (Ellipse and Radius only). • –Ellipse (Non-Metallic trim colors only) • –Radius (Metallic trim colors only; upcharge for Metallic trim on pull is included in price.) 4) Wood finish for drawer fronts. 5) Trim color for lock plug. *Note: $58 upcharge (list) for drawer fronts/case Metallic trim color.

Class FP – SIN 711-3; Discount Group XII Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

299

UniGroup Too Price List

X Series Suspended Pedestals for use with UniGroup Too, UniGroup, PLACES

Box/File — Suspended

Actual Height

Actual Depth

Actual Width

19 5/8′′ (498mm)

17′′ (432mm)

15′′ (381mm)

19 5/8′′ (498mm)

23′′ (584mm)

15′′ (381mm)

Description

Pull

Number 1 2

(S) Painted Price

Box/File

1

JPHA-18-

1

$327

$345

$536

$553

JPHA-18JPHA-18JPHA-24-

1

370 382 $350

388

Box/File

2, 3 7, 8, 9 1

579 591 $558

596 608 $576

Box/Box/File

2, 3 7, 8, 9 1

JPHA-24JPHA-24JPHH-18-

1

393 405 $449

601 613 $715

619 631 $738

Box/Box/File

2, 3 7, 8, 9 1

JPHH-18JPHH-18JPHH-24-

1

517 533 $476

783 799 $741

806 822 $765

File/File

2, 3 7, 8, 9 1

JPHH-24JPHH-24JPHJ-18-

1

544 560 $368

809 825 $615

833 849 $639

File/File

2, 3 7, 8, 9 1

JPHJ-18JPHJ-18JPHJ-24-

1

411 423 $393

658 670 $643

682 694 $664

2, 3 7, 8, 9

JPHJ-24JPHJ-24-

686 698

707 719

JPHA-24

Box/Box/File— Suspended

25 5/8′′ (651mm)

25 5/8′′ (651mm)

25 5/8′′ (651mm)

JPHH-24

17′′ (432mm)

23′′ (584mm)

17′′ (432mm)

15′′ (381mm)

15′′ (381mm)

15′′ (381mm)

File/File— Suspended 25 5/8′′ (651mm)

23′′ (584mm)

15′′ (381mm)

Features JPHJ-24

2

Pull Styles

Ellipse

Crescent

Radius

Linear

Taper

Classic

436 448

(K-N-Q) (W) (W) Painted Wood Wood Perf. Price Price I Price II

$368 411 $467 535 $494 562 $401 444 $426 469

To Order, Specify:

• Includes attachment hardware, one black pencil tray. • Box drawer includes one divider; file drawer includes one compressor. • Standard with lock; keyed alike and master keying options available. • Drawers interiors and accessories are black. • Suspended units must be attached under a worksurface equal to or deeper than pedestal depth. • Optional drawer fronts include painted, painted perforated or wood. • Perforated option (with liner) available on the file drawer only. (Not available on box drawers or with Crescent, Linear and Classic pulls.) • Optional drawer pulls include Ellipse, Radius, Taper, Crescent, Linear and Classic pulls. • –Ellipse pull available in non-Metallic trim colors only. • –Radius pull available in Metallic trim colors only. • –Taper pull trim color matches case trim color. • –Crescent, Linear and Classic pulls are brushed nickel finish.

Specification Tips • Specify pedestal accessories separately, as required. • See appropriate price book for specification requirements. • Use corner brackets and/or cantilevers to attach the worksurface to the panel. • Suspended pedestals can only be used with RACE, UniGroup, UniGroup Too, and PLACES systems applications.

Painted Drawer Fronts 1) Product number, including:

1 Drawer Front Style: S

Painted

Painted Perforated file drawer front options K Meteors N Constellation Q Galaxy

2 Pull (see side bar) 2) Trim color for drawer fronts and case.* 3) Trim color for pull (Ellipse and Radius only). • –Ellipse (Non-Metallic trim colors only) • –Radius (Metallic trim colors only; upcharge for Metallic trim on pull is included in price.) 4) Trim color for lock plug.

Wood Drawer Fronts 1) Product number, including:

1 Drawer Front Style: W Wood

2 Pull (see side bar) 2) Trim color for case.* 3) Trim color for pull (Ellipse and Radius only). • –Ellipse (Non-Metallic trim colors only) • –Radius (Metallic trim colors only; upcharge for Metallic trim on pull is included in price.) 4) Wood finish for drawer fronts. 5) Trim color for lock plug. *Note: $58 upcharge (list) for drawer fronts/case Metallic trim color.

300

April 2008 / USA

Class FP – SIN 711-3; Discount Group XII Canadian Conversion Factor: Refer to haworth.com/Canada

UniGroup Too Price List

X Series Mobile Pedestals for use with UniGroup Too, UniGroup, PLACES

Box/File — Mobile

Actual Height

Actual Depth

Actual Width

21 1/2′′ (546mm)

17′′ (432mm)

15′′ (381mm)

21 1/2′′ (546mm)

27 1/2′′ (699mm)

JPMA-24

23′′ (584mm)

17′′ (432mm)

15′′ (381mm)

15′′ (381mm)

Description

Pull

Number 1 2

(S) Painted Price

Box/File

1

JPMA-18-

1

$479

$497

$ 683

$ 705

JPMA-18JPMA-18JPMA-24-

1

522 534 $515

540

Box/File

2, 3 7, 8, 9 1

726 738 $ 718

748 760 $ 741

Box/Box/File

2, 3 7, 8, 9 1

JPMA-24JPMA-24JPMH-18-

1

558 570 $592

761 773 $ 854

784 796 $ 881

Box/Box/File

2, 3 7, 8, 9 1

JPMH-18JPMH-18JPMH-24-

1

660 676 $619

922 938 $ 880

949 965 $ 908

Box/Box/File

2, 3 7, 8, 9 1

JPMH-24JPMH-24JPMH-30-

1

687 703 $683

948 964 $ 942

976 992 $ 972

File/File

2, 3 7, 8, 9 1

JPMH-30JPMH-30JPMJ-18-

1

751 767 $555

1010 1026 $ 801

1040 1056 $ 826

File/File

2, 3 7, 8, 9 1

JPMJ-18JPMJ-18JPMJ-24-

1

598 610 $579

844 856 $ 824

869 881 $ 850

File/File

2, 3 7, 8, 9 1

JPMJ-24JPMJ-24JPMJ-30-

1

622 634 $640

867 879 $ 883

893 905 $ 911

2, 3 7, 8, 9

JPMJ-30JPMJ-30-

926 938

954 966

Box/Box/File— Mobile 27 1/2′′ (699mm)

27 1/2′′ (699mm)

23′′ (584mm)

29′′ (737mm)

15′′ (381mm)

15′′ (381mm)

JPMH-24

File/File — Mobile

27 1/2′′ (699mm)

27 1/2′′ (699mm)

27 1/2′′ (699mm)

17′′ (432mm)

23′′ (584mm)

29′′ (737mm)

JPMJ-24

2

Pull Styles

Ellipse

Radius

Taper

Crescent

Linear

Classic

15′′ (381mm)

15′′ (381mm)

15′′ (381mm)

Features

683 695

(K-N-Q) (W) (W) Painted Wood Wood Perf. Price Price I Price II

$533 576 $610 678 $637 705 $701 769 $588 631 $612 655 $673 716

To Order, Specify:

• Casters: Black; non-locking, 2 swivel (rear), 2 fixed (front). • Standard with lock; keyed alike and master keying options available. • Optional drawer fronts include painted, painted perforated or wood. • Perforated option (with liner) available on file drawer only. (Not available on box drawers or with Crescent, Linear and Classic pulls.) • Crescent, Linear and Classic pulls are available on painted steel or wood drawer fronts only. • Optional drawer pulls include Ellipse, Radius, Taper, Crescent, Linear and Classic. • –Ellipse pull available in non-Metallic trim colors only. • –Radius pull available in Metallic trim colors only. • –Taper pull trim color matches case trim color. • –Crescent, Linear and Classic pulls are brushed nickel finish. Available on RUSH.

Painted Drawer Fronts 1) Product number, including:

1 Drawer Front Style: S

Painted

Painted Perforated file drawer front options K Meteors N Constellation Q Galaxy

2 Pull (see side bar) 2) Trim color for drawer fronts and case.* 3) Trim color for pull (Ellipse and Radius only). • –Ellipse (Non-Metallic trim colors only) • –Radius (Metallic trim colors only; upcharge for Metallic trim on pull is included in price.) 4) Trim color for lock plug.

Wood Drawer Fronts 1) Product number, including:

1 Drawer Front Style: W Wood

2 Pull (see side bar) 2) Trim color for case.* 3) Trim color for pull (Ellipse and Radius only). • –Ellipse (Non-Metallic trim colors only) • –Radius (Metallic trim colors only; upcharge for Metallic trim on pull is included in price.) 4) Wood finish for drawer fronts. 5) Trim color for lock plug. *Note: $58 upcharge (list) for drawer fronts/case Metallic trim color. Class FP – SIN 711-3; Discount Group XII Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

301

UniGroup Too Price List

X Series Pedestal Accessories for use with UniGroup Too, UniGroup, PLACES

Pencil Tray

Height

Depth

Width

Number

Price

1 1/4′′(32mm)

5 1/2′′(140mm)

12 7/8′′(327mm)

JPTA-6

$24

Features

To Order, Specify:

• Includes one black plastic tray. • Suspends from sides of 6′′(152mm) drawer and slides for drawer access.

1) Product number. (No finish specification required.)

Available on RUSH. JPTA-6

Dividers

3′′(76mm)

12′′(305mm)

JBDA-6

$23

Features

To Order, Specify:

• • • •

1) Product number. (No finish specification required.)

Includes six dividers. Spans 6′′(152mm) drawer from side-to-side. Adjusts in 1′′(25mm) increments from front to back of drawer. Standard in black finish color only. Available on RUSH.

JBDA-6

CD Holder

6 1/2′′(165mm)

12 3/4′′(324mm)

6′′(152mm)

JCDA-12

$21

Features

To Order, Specify:

• Fits side-to-side inside file drawer. • Holds 24 CD jewel cases. • Standard in black finish color only.

1) Product number. (No finish specification required.)

JCDA-12

Worksurface Height Adjustment Kit for Attached Pedestal

1-2′′(25-51mm)

JAKA-18 JAKA-24 JAKA-30

Features

To Order, Specify:

• Includes top and eight height adjustment spacers and attachment hardware. • Provides height adjustment for pedestal-supported worksurfaces. • Raises worksurfaces in 1′′(25mm) increments up to 2′′(51mm) above standard worksurface height. • Standard in charcoal finish color only.

1) Product number.

$146 146 146

2) Trim color.

JAKA-18

Pedestal Cushion Kit Height

Depth

Width

Number

Fabric Grade A B

C

D

2′′(51mm) 2′′(51mm)

17′′(432mm) 23′′(584mm)

15′′(381mm) 15′′(381mm)

JCTA-18 JCTA-24

$141 $245

$180 $289

$190 $299

$158 $267

Features

To Order, Specify:

• Includes cushion with fastener. • For use on 18′′(457mm) and 24′′(610mm) deep mobile pedestal. • Field installed. • COM yardage: 1 yard

1) Product number. 2) Fabric surface/color.

JCTA-24

Stationary Pedestal Conversion Kit

302

April 2008 / USA

Depth

Number

Price

18′′(457mm) 24′′(610mm) 30′′(762mm)

JSCK-18 JSCK-24 JSCK-30

$117 117 117

Features

To Order, Specify:

• Includes top, counterweight, and attachment hardware. • Converts suspended or attached pedestal to stationary pedestal.

1) Product number.

Class FP – SIN 711-3; Discount Group XII Canadian Conversion Factor: Refer to haworth.com/Canada

2) Trim color.

UniGroup Too Price List

X Series Lateral Files — Attached for use with UniGroup Too, UniGroup, PLACES

Two-High Lateral File Painted, Painted Perforated or Wood Drawer Fronts — Attached

Actual Height

Actual Depth

Actual Width

27 1/2′′ (699mm)

18 3/4′′ (476mm)

29 7/8′′ (759mm)

27 1/2′′ (699mm)

27 1/2′′ (699mm)

Pull Styles

Ellipse

Radius

Taper

18 3/4′′ (476mm)

35 7/8′′ (911mm)

41 7/8′′ (1064mm)

Number 1 2

1

JLPD-0230-

$685

$718

$ 851

$ 878

2, 3 7, 8, 9 1

JLPD-0230JLPD-0230JLPD-0236-

730 740 $803

763

896 906 $ 996

923 933 $1027

2, 3 7, 8, 9 1

JLPD-0236JLPD-0236JLPD-0242-

1041 1051 $1106

1072 1082 $1141

2, 3 7, 8, 9

JLPD-0242JLPD-0242-

1151 1161

1186 1196

1A A A 1A A A 1A A A

Features

JLPD-S1A

2

18 3/4′′ (476mm)

Pull

(S) Painted Price

Crescent

Linear

Classic

848 858 $893

(K-N-Q) Painted Perf. Price

(W) Wood Price I

(W) Wood Price II

$836 881 $926

938 948

971

To Order, Specify:

• Includes attachment hardware, and adjustable side-to-side hanging bars. • Attached files must be attached under a worksurface 20′′(508mm) or deeper; does not include counterweight. • Standard with lock; keyed-alike and master keying options available. • Glides provide 1 1/2′′(38mm) adjustment range. • Drawer interiors and accessories are black. • Optional drawer fronts include painted, painted perforated or wood. • Painted perforated lateral file drawer front does not include inner liner. • Optional drawer pulls include Ellipse, Radius, Taper, Crescent, Linear and Classic. • –Ellipse pull available in non-Metallic trim colors only. • –Radius pull available in Metallic trim colors only. • –Taper pull trim color matches case trim color. • –Crescent, Linear and Classic pulls are brushed nickel finish. • Crescent, Linear and Classic pulls are available on painted steel or wood drawer fronts only. Available on RUSH.

Specification Tips • Use corner brackets and/or cantilevers to attach the worksurface to the panel. • Specify lateral file accessories separately, as required. • Specify worksurface height adjustment kit if mounting worksurface up to 2′′(51mm) higher than standard mounting height; specify separately.

Painted Drawer Fronts 1) Product number, including:

1 Drawer Front Style: S

Painted

Painted Perforated drawer front options K Meteors N Constellation Q Galaxy

2 Pull (see side bar) 2) Trim color for drawer fronts and case.* 3) Trim color for pull (Ellipse and Radius only). • –Ellipse (Non-Metallic trim colors only) • –Radius (Metallic trim colors only; upcharge for Metallic trim on pull is included in price.) 4) Trim color for lock plug.

Wood Drawer Fronts 1) Product number, including:

1 Drawer Front Style: W Wood

2 Pull (see side bar) 2) Trim color for case.* 3) Trim color for pull (Ellipse and Radius only). • –Ellipse (Non-Metallic trim colors only) • –Radius (Metallic trim colors only; upcharge for Metallic trim on pull is included in price.) 4) Wood finish for drawer fronts. 5) Trim color for lock plug. *Note: $89 upcharge (list) for drawer fronts/case Metallic trim color.

Class FP – SIN 711-3; Discount Group XII Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

303

UniGroup Too Price List

X Series Lateral Files — Freestanding for use with UniGroup Too, UniGroup, PLACES

Two-High Lateral File Painted, Painted Perforated or Wood Drawer Fronts — Freestanding

Actual Height

Actual Depth

Actual Width

27 1/2′′ (699mm)

18 3/4′′ (476mm)

29 7/8′′ (759mm)

27 1/2′′ (699mm)

27 1/2′′ (699mm)

Pull Styles

Ellipse

Radius

Taper

18 3/4′′ (476mm)

35 7/8′′ (911mm)

41 7/8′′ (1064mm)

Number 1 2

1

JLPD-0230-

1

$ 785

$ 818

$ 951

$ 978

2, 3 7, 8, 9 1

JLPD-0230JLPD-0230JLPD-0236-

863

1

830 840 $ 913

996 1006 $1106

1023 1033 $1137

2, 3 7, 8, 9 1

JLPD-0236JLPD-0236JLPD-0242-

1

958 968 $1034

1151 $1161 $1247

1182 1192 $1282

2, 3 7, 8, 9

JLPD-0242JLPD-0242-

1292 1302

1327 1337

Features

JLPD-S1

2

18 3/4′′ (476mm)

Pull

(S) Painted Price

Crescent

Linear

Classic

(K-N-Q) Painted Perf. Price

(W) Wood Price I

(W) Wood Price II

$ 946 991 $1067

1079 1089

1112

To Order, Specify:

• Includes adjustable side-to-side hanging bars. • Two-high freestanding files are standard with installed counterweight. • Standard with lock; keyed-alike and master keying options available. • Optional drawer fronts include painted, painted perforated or wood. • Painted perforated lateral file drawer front does not include inner liner. • Crescent, Linear and Classic pulls are available on painted steel or wood drawer fronts only. • Optional drawer pulls include Ellipse, Radius, Taper, Crescent, Linear and Classic. • –Ellipse pull available in non-Metallic trim colors only. • –Radius pull available in Metallic trim colors only. • –Taper pull trim color matches case trim color. • –Crescent, Linear and Classic pulls are brushed nickel finish. Available on RUSH.

Painted Drawer Fronts 1) Product number, including:

1 Drawer Front Style: S

Painted

Painted Perforated drawer front options K Meteors N Constellation Q Galaxy

2 Pull (see side bar) 2) Trim color for drawer fronts and case.* 3) Trim color for pull (Ellipse and Radius only). • –Ellipse (Non-Metallic trim colors only) • –Radius (Metallic trim colors only; upcharge for Metallic trim on pull is included in price.) 4) Trim color for lock plug.

Wood Drawer Fronts 1) Product number, including:

1 Drawer Front Style: W Wood

2 Pull (see side bar) 2) Trim color for case.* 3) Trim color for pull (Ellipse and Radius only). • –Ellipse (Non-Metallic trim colors only) • –Radius (Metallic trim colors only; upcharge for Metallic trim on pull is included in price.) 4) Wood finish for drawer fronts. 5) Trim color for lock plug. *Note: $89 upcharge (list) for drawer fronts/case Metallic trim color.

304

April 2008 / USA

Class FP – SIN 711-3; Discount Group XII Canadian Conversion Factor: Refer to haworth.com/Canada

UniGroup Too Price List

X Series Lateral Files — Freestanding for use with UniGroup Too, UniGroup, PLACES

Three-High Lateral File Painted, Painted Perforated or Wood Drawer Fronts

Actual Height

Actual Depth

Actual Width

39 1/2′′ (1003mm)

18 3/4′′ (476mm)

29 7/8′′ (759mm)

39 1/2′′ (1003mm)

39 1/2′′ (1003mm)

JLPD-S1

2

Radius

Taper

18 3/4′′ (476mm)

35 7/8′′ (911mm)

41 7/8′′ (1064mm)

Number 1 2

1

JLPD-0330-

1

$ 922

$ 972

$1209

$1247

2, 3 7, 8, 9 1

JLPD-0330JLPD-0330JLPD-0336-

1039

1

989 1006 $1065

1276 1293 $1393

1314 1331 $1436

2, 3 7, 8, 9 1

JLPD-0336JLPD-0336JLPD-0342-

1

1132 1149 $1219

1460 1477 $1599

1503 1520 $1648

2, 3 7, 8, 9

JLPD-0342JLPD-0342-

1666 1683

1715 1732

Features

Pull Styles

Ellipse

18 3/4′′ (476mm)

Pull

(S) Painted Price

Crescent

Linear

Classic

(K-N-Q) Painted Perf. Price

(W) Wood Price I

(W) Wood Price II

$1115 1182 $1269

1286 1303

1336

To Order, Specify:

• Includes adjustable side-to-side hanging bars. • Counterweight option recommended if files are not ganged together or anchored to a fixed object; specify separately. • Standard with lock; keyed-alike and master keying options available. • Optional drawer fronts include painted, painted perforated or wood. • Painted perforated lateral file drawer front does not include inner liner. • Crescent, Linear and Classic pulls are available on painted steel or wood drawer fronts only. • Optional drawer pulls include Ellipse, Radius, Taper, Crescent, Linear and Classic. • –Ellipse pull available in non-Metallic trim colors only. • –Radius pull available in Metallic trim colors only. • –Taper pull trim color matches case trim color. • –Crescent, Linear and Classic pulls are brushed nickel finish. Available on RUSH.

Painted Drawer Fronts 1) Product number, including:

1 Drawer Front Style: S

Painted

Painted Perforated drawer front options K Meteors N Constellation Q Galaxy

2 Pull (see side bar) 2) Trim color for drawer fronts and case.* 3) Trim color for pull (Ellipse and Radius only). • –Ellipse (Non-Metallic trim colors only) • –Radius (Metallic trim colors only; upcharge for Metallic trim on pull is included in price.) 4) Trim color for lock plug.

Wood Drawer Fronts 1) Product number, including:

1 Drawer Front Style: W Wood

2 Pull (see side bar) 2) Trim color for case.* 3) Trim color for pull (Ellipse and Radius only). • –Ellipse (Non-Metallic trim colors only) • –Radius (Metallic trim colors only; upcharge for Metallic trim on pull is included in price.) 4) Wood finish for drawer fronts. 5) Trim color for lock plug. *Note: $117 upcharge (list) for drawer fronts/case Metallic trim color.

Class FP – SIN 711-3; Discount Group XII Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

305

UniGroup Too Price List

X Series Lateral Files — Freestanding for use with UniGroup Too, UniGroup, PLACES

Four-High Lateral File Painted, Painted Perforated or Wood Drawer Fronts

Actual Height

Actual Depth

Actual Width

51 1/2′′ (1308mm)

18 3/4′′ (476mm)

29 7/8′′ (759mm)

51 1/2′′ (1308mm)

51 1/2′′ (1308mm)

18 3/4′′ (476mm)

18 3/4′′ (476mm)

35 7/8′′ (911mm)

41 7/8′′ (1064mm)

Pull

Number 1 2

(S) Painted Price

1

JLPD-0430-

1

$1167

$1234

$1448

$1493

2, 3 7, 8, 9 1

JLPD-0430JLPD-0430JLPD-0436-

1324

1

1257 1278 $1381

1538 1559 $1704

1583 1604 $1757

2, 3 7, 8, 9 1

JLPD-0436JLPD-0436JLPD-0442-

1

1471 1492 $1580

1794 1815 $1955

1847 1868 $2015

2, 3 7, 8, 9

JLPD-0442JLPD-0442-

2045 2066

2105 2126

Features JLPD-S1

2

Pull Styles

Ellipse

Radius

Taper

Crescent

Linear

Classic

(K-N-Q) Painted Perf. Price

(W) Wood Price I

(W) Wood Price II

$1448 1538 $1647

1670 1691

1737

To Order, Specify:

• Includes adjustable side-to-side hanging bars. • Counterweight option recommended if files are not ganged together or anchored to a fixed object; specify separately. • Standard with lock; keyed-alike and master keying options available. • Optional drawer fronts include painted, painted perforated or wood. • Painted perforated lateral file drawer front does not include inner liner. • Crescent, Linear and Classic pulls are available on painted steel or wood drawer fronts only. • Optional drawer pulls include Ellipse, Radius, Taper, Crescent, Linear and Classic. • –Ellipse pull available in non-Metallic trim colors only. • –Radius pull available in Metallic trim colors only. • –Taper pull trim color matches case trim color. • –Crescent, Linear and Classic pulls are brushed nickel finish. Available on RUSH.

Painted Drawer Fronts 1) Product number, including:

1 Drawer Front Style: S

Painted

Painted Perforated drawer front options K Meteors N Constellation Q Galaxy

2 Pull (see side bar) 2) Trim color for drawer fronts and case.* 3) Trim color for pull (Ellipse and Radius only). • –Ellipse (Non-Metallic trim colors only) • –Radius (Metallic trim colors only; upcharge for Metallic trim on pull is included in price.) 4) Trim color for lock plug.

Wood Drawer Fronts 1) Product number, including:

1 Drawer Front Style: W Wood

2 Pull (see side bar) 2) Trim color for case.* 3) Trim color for pull (Ellipse and Radius only). • –Ellipse (Non-Metallic trim colors only) • –Radius (Metallic trim colors only; upcharge for Metallic trim on pull is included in price.) 4) Wood finish for drawer fronts. 5) Trim color for lock plug. *Note: $146 upcharge (list) for drawer fronts/case Metallic trim color.

306

April 2008 / USA

Class FP – SIN 711-3; Discount Group XII Canadian Conversion Factor: Refer to haworth.com/Canada

UniGroup Too Price List

X Series Lateral Files — Freestanding for use with UniGroup Too, UniGroup, PLACES

Five-High Lateral File Painted, Painted Perforated or Wood Drawer Fronts

Actual Height

Actual Depth

Actual Width

63 1/2′′ (1613mm)

18 3/4′′ (476mm)

29 7/8′′ (759mm)

63 1/2′′ (1613mm)

63 1/2′′ (1613mm)

18 3/4′′ (476mm)

18 3/4′′ (476mm)

35 7/8′′ (911mm)

41 7/8′′ (1064mm)

Pull

Number 1 2

(S) Painted Price

1

JLPD-0530-

1

$1400

$1484

$1896

$1954

2, 3 7, 8, 9 1

JLPD-0530JLPD-0530JLPD-0536-

1594

1

1510 1539 $1643

2006 2035 $2216

2064 2093 $2284

2, 3 7, 8, 9 1

JLPD-0536JLPD-0536JLPD-0542-

1

1753 1782 $1888

2326 2355 $2547

2394 2423 $2626

2, 3 7, 8, 9

JLPD-0542JLPD-0542-

2657 2686

2736 2765

Features

JLPD-S1

2

Pull Styles

Ellipse

Radius

Crescent

Linear

(W) Wood Price I

(W) Wood Price II

$1727 1837 $1972

1998 2027

2082

To Order, Specify:

• Includes adjustable side-to-side hanging bars. • Counterweight option recommended if files are not ganged together or anchored to a fixed object; specify separately. • Standard with lock; keyed-alike and master keying options available. • Optional drawer fronts include painted, painted perforated or wood. • Painted perforated lateral file drawer front does not include inner liner. • Crescent, Linear and Classic pulls are available on painted steel or wood drawer fronts only. • Optional drawer pulls include Ellipse, Radius, Taper, Crescent, Linear and Classic. • –Ellipse pull available in non-Metallic trim colors only. • –Radius pull available in Metallic trim colors only. • –Taper pull trim color matches case trim color. • –Crescent, Linear and Classic pulls are brushed nickel finish. Available on RUSH.

Taper

(K-N-Q) Painted Perf. Price

Classic

Painted Drawer Fronts 1) Product number, including:

1 Drawer Front Style: S

Painted

Painted Perforated drawer front options K Meteors N Constellation Q Galaxy

2 Pull (see side bar) 2) Trim color for drawer fronts and case.* 3) Trim color for pull (Ellipse and Radius only). • –Ellipse (Non-Metallic trim colors only) • –Radius (Metallic trim colors only; upcharge for Metallic trim on pull is included in price.) 4) Trim color for lock plug.

Wood Drawer Fronts 1) Product number, including:

1 Drawer Front Style: W Wood

2 Pull (see side bar) 2) Trim color for case.* 3) Trim color for pull (Ellipse and Radius only). • –Ellipse (Non-Metallic trim colors only) • –Radius (Metallic trim colors only; upcharge for Metallic trim on pull is included in price.) 4) Wood finish for drawer fronts. 5) Trim color for lock plug. *Note: $174 upcharge (list) for drawer fronts/case Metallic trim color.

Class FP – SIN 711-3; Discount Group XII Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

307

UniGroup Too Price List

X Series Lateral Files — Freestanding for use with UniGroup Too, UniGroup, PLACES

Five-High Lateral File Painted, Painted Perforated or Wood Drawer Fronts — with Swing Doors

Actual Height

Actual Depth

Actual Width

63 1/2′′ (1613mm)

18 3/4′′ (476mm)

29 7/8′′ (759mm)

63 1/2′′ (1613mm)

63 1/2′′ (1613mm)

18 3/4′′ (476mm)

18 3/4′′ (476mm)

35 7/8′′ (911mm)

41 7/8′′ (1064mm)

Pull

Number 1 2

(S) Painted Price

1

JLPS-0530-

1

$1424

$1524

$1919

$1978

2, 3 7, 8, 9 1

JLPS-0530JLPS-0530JLPS-0536-

1656

1

1556 1590 $1674

2051 2085 $2246

2110 2144 $2315

2, 3 7, 8, 9 1

JLPS-0536JLPS-0536JLPS-0542-

1

1806 1840 $1922

2378 2412 $2580

2447 2481 $2660

2, 3 7, 8, 9

JLPS-0542JLPS-0542-

2712 2746

2792 2826

Features

JLPS-S1

2

Pull Styles

Ellipse

Crescent

Radius

Linear

Taper

Classic

(K-N-Q) Painted Perf. Price

(W) Wood Price I

(W) Wood Price II

$1774 1906 $2022

2054 2088

2154

To Order, Specify:

• Includes adjustable side-to-side hanging bars. • Equipped with four drawers and two swing doors with fixed shelf in top position. • Standard with lock; keyed-alike and master keying options available. • Top shelf accommodates media up to 11 7/8′′(302mm) high. • Doors lock simultaneously with drawers. • Counterweight option recommended if files are not ganged together or anchored to a fixed object; specify separately. • Optional drawer fronts include painted, painted perforated or wood. • Painted perforated lateral file drawer front does not include inner liner, swing doors include inner liner. • Crescent, Linear and Classic pulls are available on painted steel or wood drawer fronts only. • Optional drawer pulls include Ellipse, Radius, Taper, Crescent, Linear and Classic. • –Ellipse pull available in non-Metallic trim colors only. • –Radius pull available in Metallic trim colors only. • –Taper pull trim color matches case trim color. • –Crescent, Linear and Classic pulls are brushed nickel finish and are oriented vertically on the swing doors. Available on RUSH.

Painted Drawer Fronts 1) Product number, including:

1 Drawer/Door Front Style: S

Painted

Painted Perforated drawer front options K Meteors N Constellation Q Galaxy

2 Pull (see side bar) 2) Trim color for drawer fronts and case.* 3) Trim color for pull (Ellipse and Radius only). • –Ellipse (Non-Metallic trim colors only) • –Radius (Metallic trim colors only; upcharge for Metallic trim on pull is included in price.) 4) Trim color for lock plug.

Wood Drawer Fronts 1) Product number, including:

1 Drawer/Door Front Style: W Wood

2 Pull (see side bar) 2) Trim color for case.* 3) Trim color for pull (Ellipse and Radius only). • –Ellipse (Non-Metallic trim colors only) • –Radius (Metallic trim colors only; upcharge for Metallic trim on pull is included in price.) 4) Wood finish for drawer fronts. 5) Trim color for lock plug. *Note: $174 upcharge (list) for drawer fronts/case Metallic trim color.

308

April 2008 / USA

Class FP – SIN 711-3; Discount Group XII Canadian Conversion Factor: Refer to haworth.com/Canada

UniGroup Too Price List

X Series Lateral File Accessories for use with UniGroup Too, UniGroup, PLACES

Front-to-Back Hanging Bars

Depth

Number

Price

15 1/2′′(394mm)

JFFA-15

$24

Features

To Order, Specify:

• Includes two front-to-back hanging bars. • Spans between side-to-side hanging bars in lateral file drawers to convert drawer to front-to-back suspended filing format. • Rear hanging bars must be set at EDP depth. • Standard in black finish color only.

1) Product number. (No finish specification required.)

Available on RUSH. JFFA-15

Side-to-Side Hanging Bars

File Width

Number

Price

30′′(762mm) 36′′(914mm) 42′′(1067mm)

JFHA-30 JFHA-36 JFHA-42

$41 41 41

Features

To Order, Specify:

• Includes two side-to-side hanging bars. • Standard in black finish color only.

1) Product number. (No finish specification required.)

Note: Side-to-side hanging bars ship standard in all lateral file drawers. JFHA

Dividers

Available on RUSH.

Height

Number

Price

7′′(178mm)

JFDA-15

$24

Features

To Order, Specify:

• Includes three dividers that insert into 1′′(25mm) incremental slots in bottom and back of file drawer. • Standard in black finish color only.

1) Product number. (No finish specification required.)

Available on RUSH.

JFDA-15

Compressor

Height

File Width

Number

Price

7′′(178mm)

30′′(762mm) 36′′(914mm) 42′′(1067mm)

JFCA-30 JFCA-36 JFCA-42

$24 24 24

Features

To Order, Specify:

• Includes one compressor and horizontal track. • Spring clip release for manual drawer settings. • Standard in black finish color only.

1) Product number. (No finish specification required.)

Available on RUSH. JFCA

Counterweight

JFWA

File Width

Number

Price

30′′(762mm) 36′′(914mm) 42′′(1067mm)

JFWA-30 JFWA-36 JFWA-42

$100 110 141

Features

To Order, Specify:

• Includes counterweight and attachment hardware. • Required for use with three-, four- or five-high freestanding lateral files when not ganged together or anchored to a fixed object. • Standard in black finish color only.

1) Product number. (No finish specification required.)

Note: Two-high freestanding lateral files ship standard with installed counterweight. Available on RUSH.

Class FP – SIN 711-3; Discount Group XII Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

309

UniGroup Too Price List

X Series Personal Storage Towers with Upper Storage for use with UniGroup Too, UniGroup, PLACES

Four-High with Hinged Door Upper Storage

Actual Height

Actual Depth

Actual Width

51 1/2′′ (1308mm)

23′′ (584mm)

24′′ (610mm)

51 1/2′′ (1308mm)

51 1/2′′ (1308mm)

51 1/2′′ (1308mm)

JTHB-5124

23′′ (584mm)

23′′ (584mm)

23′′ (584mm)

24′′ (610mm)

24′′ (610mm)

24′′ (610mm)

Description Pull

Number 1 2 3

(SS) (KK-NN-QQ) (WW) (WW) Painted Painted Wood Wood Price Perf. Price Price I Price II

Box/Box/File Valet Right 24′′(610mm) Storage Box/Box/File Valet Left 24′′(610mm) Storage File/File Valet Right 24′′(610mm) Storage File/File Valet Left 24′′(610mm) Storage

1

JTHB-5124-

1

$2241

$2277

$2731 $2816

2, 3 7, 8, 9 1

JTHB-5124JTHB-5124JTHE-5124-

2388

1

2352 2380 $2241

2842 2927 2870 2955 $2731 $2816

2, 3 7, 8, 9 1

JTHE-5124JTHE-5124JTHG-5124-

1

2352 2380 $2082

2, 3 7, 8, 9 1

JTHG-5124JTHG-5124JTHJ-5124-

1

2172 2193 $2082

2, 3 7, 8, 9

JTHJ-5124JTHJ-5124-

Features

JTHJ-5124

2

Pull Styles

Ellipse

Crescent

Radius

Linear

Taper

Classic

$2277 2388 $2133 2223 $2118

2172 2082

2842 2927 2870 2955 $2559 $2639 2649 2729 2670 2750 $2559 $2639

2208

2649 2559

To Order, Specify:

• 24′′(610mm) storage unit includes one adjustable shelf. • Valet and storage doors lock independently with lock located below pulls. • Drawers lock together with lock located in right side of lock fascia. • Optional translucent top adds 2 3/4′′(70mm) to overall height of unit. • Optional drawer/door fronts include painted, painted perforated or wood. • Perforated option (with liner) available on file drawer and storage doors only. (Not available on box drawers, valet or with Crescent, Linear and Classic pulls.) • Crescent, Linear and Classic pulls are available on painted steel or wood drawer fronts only. • Optional drawer pulls include Ellipse, Radius, Taper, Crescent, Linear and Classic. • –Ellipse pull available in non-Metallic trim colors only. • –Radius pull available in Metallic trim colors only. • –Taper pull trim color matches case trim color. • –Crescent, Linear and Classic pulls are brushed nickel finish. • Caster option adds 3′′(76mm) to overall height. • Leg option adds 5 1/8′′(130mm) to overall height. • –Legs are color matched to case with black adjustment extensions. • –Adjustment extensions provide 1 1/2′′(38mm)adjustment range. • –Field installed. • Caster and leg option limited to unit heights up to 51 1/2′′(1308mm) high. • Towers can be varied in height, in 1′′(25mm) increments from standard heights between 47.5′′(1207mm) and 73.5′′(1867mm). Contact Haworth Specials for ordering information.

Painted Drawer/Door Fronts 1) Product number, including:

1 Drawer/Door Front Style: SS Painted Painted Perforated file drawer/storage door front options KK Meteors NN Constellation QQ Galaxy

2 Pull (see side bar) 3 Top Option: R Regular top T

Translucent top; add $423 list

2) Trim color for drawer/door/case.* 3) Trim color for pull (Ellipse and Radius only). • –Ellipse (Non-Metallic trim colors only) • –Radius (Metallic trim colors only; upcharge for Metallic trim on pull is included in price.) 4) Trim color for lock plug.

Wood Drawer/Door Fronts 1) Product number, including:

1 Drawer/Door Front Style: WW Wood

Leg Option

2 Pull (see side bar)

Leg Option requires modification of the product number. Add L to the product number and add $176 list.

3 Top Option:

Example: JTHB-5124-SS1RL

R Regular top T

Caster Option Caster Option requires modification of the product number. Add C to the product number and add $195 list. Example: JTHB-5124-SS1RC

Translucent top; add $423 list

2) Trim color for case.* 3) Trim color for pull (Ellipse and Radius only). • –Ellipse (Non-Metallic trim colors only) • –Radius (Metallic trim colors only; upcharge for Metallic trim on pull is included in price.) 4) Wood finish for drawer/door fronts. 5) Trim color for lock plug. *Note: $195 upcharge (list) for drawer/door/ case Metallic trim color.

310

April 2008 / USA

2729 2639

Class FP – SIN 711-3; Discount Group XII Canadian Conversion Factor: Refer to haworth.com/Canada

UniGroup Too Price List

X Series Personal Storage Towers with Upper Storage — Translucent Doors for use with UniGroup Too, UniGroup, PLACES Actual Height Four-High with Hinged Door Upper Storage — Translucent Doors

JTHB-5124-SU3

JTHJ-5124-SU3

Actual Depth

Actual Width

Description

51 1/2′′ 23′′ 24′′ Box/Box/File (1308mm) (584mm) (610mm) Valet Right 24′′(610mm) Storage Box/Box/File Valet Left 24′′(610mm) Storage 51 1/2′′ 23′′ 24′′ File/File (1308mm) (584mm) (610mm) Valet Right 24′′(610mm) Storage File/File Valet Left 24′′(610mm) Storage

Number JTHB-5124-

1

2 U3

(S) (K-N-Q) (W) (W) Translucent Painted Painted Wood Wood Color Price Perf. Price Price I Price II White Patterned

JTHE-5124-

U3

White Patterned

JTHG-5124-

U3

White Patterned

JTHJ-5124-

U3

Features

White Patterned

$2563

$2581

$2767

$2852

2917

2935

3121

3206

$2563

$2581

$2767

$2852

2917

2935

3121

3206

$2382

$2415

$2573

$2653

2736

2769

2927

3007

$2382

$2400

$2573

$2653

2736

2754

2927

3007

To Order, Specify:

• 24′′(610mm) storage unit includes one adjustable shelf. • Translucent doors are non-locking. • Drawers lock together with lock located in right side of lock fascia. • Optional translucent top option adds 2 3/4′′(70mm) to overall height of unit. • Optional drawer fronts include painted, painted perforated or wood. • Perforated option (with liner) available on file drawer only. • Personal Storage Towers with translucent doors are standard with Taper pulls only. • Taper pulls on translucent doors are full-height and match case trim color. • Caster option adds 3′′(76mm) to overall height. • Leg option adds 5 1/8′′(130mm) to overall height. • –Legs are color matched to case with black adjustment extensions. • –Adjustment extensions provide 1 1/2′′(38mm) adjustment range. • –Field installed. • Caster and leg option limited to unit heights up to 51 1/2′′(1308mm) high. • Towers can be varied in height, in 1′′(25mm) increments from standard heights between 47.5′′(1207mm) and 73.5′′(1867mm). Contact Haworth Specials for ordering information.

Painted Drawer Fronts 1) Product number, including:

1 Drawer Front Style: S Painted Painted Perforated file drawer front options K Meteors N Constellation Q Galaxy

2 Top Option: R Regular top T

Translucent top; add $423 list

2) Trim color for drawer fronts and case.* 3) Translucent color for doors. 4) Trim color for lock plug.

Wood Drawer Fronts 1) Product number, including:

1 Drawer Front Style: W Wood

Leg Option Leg Option requires modification of the product number. Add L to the product number and add $176 list. Example: JTHB-5124-SU3RL

2 Top Option: R Regular top T

Translucent top; add $423 list

Caster Option

2) Trim color for case.*

Caster Option requires modification of the product number. Add C to the product number and add $195 list.

3) Translucent color for doors.

Example: JTHB-5124-SU3RC

5) Trim color for lock plug.

4) Wood finish for drawer fronts. *Note: $195 upcharge (list) for drawer fronts/case Metallic trim color.

Class FP – SIN 711-3; Discount Group XII Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

311

UniGroup Too Price List

X Series Personal Storage Towers with Bookcase — Translucent Door for use with UniGroup Too, UniGroup, PLACES Actual Height Four-High with Bookcase — Translucent Door

JTBB-5124-SU3

Actual Actual Depth Width Description Number

51 1/2′′ 23′′ 24′′ Box/Box/File (1308mm) (584mm) (610mm) Valet Right 24′′(610mm) Bookcase Box/Box/File Valet Left 24′′(610mm) Bookcase 51 1/2′′ 23′′ 24′′ File/File (1308mm) (584mm) (610mm) Valet Right 24′′(610mm) Bookcase File/File Valet Left 24′′(610mm) Bookcase

1

JTBB-5124-

2 U3

(S) (K-N-Q) (W) (W) Translucent Painted Painted Wood Wood Color Price Perf. Price Price I Price II White Patterned

JTBE-5124-

U3

White Patterned

JTBG-5124-

U3

White Patterned

JTBJ-5124-

U3

White Patterned

Features

JTBJ-5124-SU3

2513

2531

$2259

$2277

2513

2531

$2092

$2125

2346

2379

$2092

$2125

2346

2379

$2471 $2548 2725

2802

$2471 $2548 2725

2802

$2292 $2363 2546

2617

$2292 $2363 2546

2617

Painted Drawer Fronts 1) Product number, including:

1 Drawer Front Style: S Painted Painted Perforated file drawer front options K Meteors N Constellation Q Galaxy

2 Top Option: R Regular top T

Translucent top; add $423 list

2) Trim color for drawer fronts and case.* 3) Translucent color for doors. 4) Trim color for lock plug.

Wood Drawer Fronts 1) Product number, including:

1 Drawer Front Style: W Wood

2 Top Option: R Regular top T

Translucent top; add $423 list

Leg Option requires modification of the product number. Add L to the product number and add $176 list.

2) Trim color for case.*

Example: JTBB-5124-SU3RL

3) Translucent color for doors.

Caster Option Caster Option requires modification of the product number. Add C to the product number and add $195 list. Example: JTBB-5124-SU3RC

April 2008 / USA

$2277

To Order, Specify:

• Bookcase has side access. • 24′′(610mm) bookcase unit includes one adjustable shelf. • Bookcase, shelves and valet interiors are color matched to case. • Translucent door is non-locking. • Drawers lock together with lock located in right side of lock fascia. • Optional translucent top adds 2 3/4′′(70mm) to overall height of unit. • Optional drawer fronts include painted, painted perforated or wood. • Perforated option (with liner) available on file drawer only. • Personal Storage Towers with translucent doors are standard with Taper pulls only. • Taper pulls on translucent doors are full-height and match case trim color. • Caster option adds 3′′(76mm) to overall height. • Leg option adds 5 1/8′′(130mm) to overall height. • –Legs are color matched to case with black adjustment extensions. • –Adjustment extensions provide 1 1/2′′(38mm) adjustment range. • –Field installed. • Caster and leg option limited to unit heights up to 51 1/2′′(1308mm) high. • Towers can be varied in height, in 1′′(25mm) increments from standard heights between 47.5′′(1207mm) and 73.5′′(1867mm). Contact Haworth Specials for ordering information.

Leg Option

312

$2259

Class FP – SIN 711-3; Discount Group XII Canadian Conversion Factor: Refer to haworth.com/Canada

4) Wood finish for drawer fronts. 5) Trim color for lock plug. *Note: $195 upcharge (list) for drawer fronts/case Metallic trim color.

UniGroup Too Price List

X Series Personal Storage Towers with Upper Storage for use with UniGroup Too, UniGroup, PLACES

Five-High with Hinged Door Upper Storage

(Right) JTHB-6324

Features

To Order, Specify:

• 24′′(610mm) storage unit includes one adjustable shelf. • 36′′(914mm) storage unit includes two adjustable shelves. • Valet and storage doors lock independently with lock located below pulls. • Drawers lock together with lock located in right side of lock fascia. • Optional translucent top adds 2 3/4′′(70mm) to overall height of unit. • Optional drawer/door fronts include painted, painted perforated or wood. • Perforated option (with liner) available on file drawer and storage doors only. (Not available on box drawers, valet or with Crescent, Linear and Classic pulls.) • Crescent, Linear and Classic pulls are available on painted steel or wood drawer fronts only. • Optional drawer pulls include Ellipse, Radius, Taper, Crescent, Linear and Classic. • –Ellipse pull available in non-Metallic trim colors only. • –Radius pull available in Metallic trim colors only. • –Taper pull trim color matches case trim color. • –Crescent, Linear and Classic pulls are brushed nickel finish. • Towers can be varied in height, in 1′′(25mm) increments from standard heights between 47.5′′(1207mm) and 73.5′′(1867mm). Contact Haworth Specials for ordering information.

Painted Drawer/Door Fronts 1) Product number, including:

1 Drawer/Door Front Style: SS Painted Painted Perforated file drawer front options KK Meteors NN Constellation QQ Galaxy

2 Pull (see below) 3 Top Option: R Regular top T

Translucent top; add $423 list

2) Trim color for drawer/door/case.* 3) Trim color for pull (Ellipse and Radius only). • –Ellipse (Non-Metallic trim colors only) • –Radius (Metallic trim colors only; upcharge for Metallic trim on pull is included in price.) 4) Trim color for lock plug.

Wood Drawer/Door Fronts 1) Product number, including:

1 Drawer/Door Front Style: WW Wood

2 Pull (see below)

(Left) JTHH-6324

3 Top Option: R Regular top T

Translucent top; add $423 list

2) Trim color for case.* 3) Trim color for pull (Ellipse and Radius only). • –Ellipse (Non-Metallic trim colors only) • –Radius (Metallic trim colors only; upcharge for Metallic trim on pull is included in price.) 4) Wood finish for drawer/door fronts. 5) Trim color for lock plug. *Note: $222 upcharge (list) for drawer/door/ case Metallic trim color.

(Right) JTHG-6324

2

Pull Styles

Ellipse

Crescent

Radius

Linear

Taper

Classic

Class FP – SIN 711-3; Discount Group XII Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

313

UniGroup Too Price List

X Series Personal Storage Towers with Upper Storage for use with UniGroup Too, UniGroup, PLACES

Five-High with Hinged Door Upper Storage

Actual Height

Actual Depth

Actual Width

63 1/2′′ (1613mm)

23′′ (584mm)

24′′ (610mm)

63 1/2′′ (1613mm)

63 1/2′′ (1613mm)

63 1/2′′ (1613mm)

63 1/2′′ (1613mm)

63 1/2′′ (1613mm)

23′′ (584mm)

23′′ (584mm)

23′′ (584mm)

23′′ (584mm)

23′′ (584mm)

24′′ (610mm)

24′′ (610mm)

24′′ (610mm)

24′′ (610mm)

24′′ (610mm)

Description Pull

Number 1 2 3

(SS) (KK-NN-QQ) (WW) (WW) Painted Painted Wood Wood Price Perf. Price Price I Price II

Box/Box/File Valet Right 36′′(914mm) Storage Box/Box/File Valet Left 36′′(914mm) Storage Box/Box/File/ File Valet Right 24′′(610mm) Storage Box/Box/File/ File Valet Left 24′′(610mm) Storage File/File Valet Right 36′′(914mm) Storage File/File Valet Left 36′′(914mm) Storage

1

JTHB-6324-

1

$2350

$2386

$2968

$3060

2, 3 7, 8, 9 1

JTHB-6324JTHB-6324JTHE-6324-

2497

1

2461 2489 $2350

3079 3107 $2968

3171 3199 $3060

2, 3 7, 8, 9 1

JTHE-6324JTHE-6324JTHN-6324-

1

2461 2489 $2624

3079 3107 $3234

3171 3199 $3334

2, 3 7, 8, 9

JTHN-6324JTHN-6324-

1

JTHH-6324-

2, 3 7, 8, 9

JTHH-6324JTHH-6324-

1

JTHG-6324-

2, 3 7, 8, 9 1

JTHG-6324JTHG-6324JTHJ-6324-

2, 3 7, 8, 9

JTHJ-6324JTHJ-6324-

Available on RUSH.

314

April 2008 / USA

Class FP – SIN 711-3; Discount Group XII Canadian Conversion Factor: Refer to haworth.com/Canada

$2386 2497 $2675

2756 2790

2807

3366 3400

3466 3500

$2624

$2675

$3234

$3334

2756 2790

2807

3366 3400

3466 3500

1

$2192

$2243

$2797

$2884

2331

1

2280 2303 $2192

2885 2908 $2797

2972 2995 $2884

2885 2908

2972 2995

1

2280 2303

$2243 2331

UniGroup Too Price List

X Series Personal Storage Towers with Upper Storage — Translucent Doors for use with UniGroup Too, UniGroup, PLACES Actual Height Five-High with Hinged Door Upper Storage — Translucent Doors

JTHB-6324-SU3

Actual Width

Description

63 1/2′′ 23′′ 24′′ Box/Box/File (1613mm) (584mm) (610mm) Valet Right 36′′(914mm) Storage Box/Box/File Valet Left 36’’(914mm) Storage 63 1/2′′ 23′′ 24′′ Box/Box/File/File (1613mm) (584mm) (610mm) Valet Right 24′′(610mm) Storage Box/Box/File/File Valet Left 24′′(610mm) Storage 63 1/2′′ 23′′ 24′′ File/File (1613mm) (584mm) (610mm) Valet Right 36′′(914mm) Storage File/File Valet Left 36′′(914mm) Storage

Number JTHB-6324-

1

2 U3

(S) (K-N-Q) (W) (W) Translucent Painted Painted Wood Wood Color Price Perf. Price Price I Price II White

$2755

$2773

3254

3272

$2755

$2773

3254

3272

$2999

$3032

3407

3440

$2999

$3032

3407

3440

$2575

$2608

3074

3107

$2575

$2608

3074

3107

Patterned JTHE-6324-

U3

White Patterned

JTHN-6324-

U3

White Patterned

JTHH-6324-

U3

White Patterned

JTHG-6324-

U3

White Patterned

JTHJ-6324-

U3

White Patterned

Features

To Order, Specify:

• • • • •

1) Product number, including:

• • JTHH-6324-SU3

Actual Depth

• • • •

24′′(610mm) storage unit includes one adjustable shelf. 36′′(914mm) unit includes two adjustable shelves. Optional shelves are available for storage; specify separately. Translucent doors are non-locking. Drawers lock together with lock located in right side of lock fascia. Optional Dome translucent top adds 2 3/4′′(70mm) to overall height of unit. Available in white only. Optional drawer fronts include painted, painted perforated or wood. Perforated option (with liner) available on file drawer only. Personal Storage Towers with translucent doors are standard with Taper pulls only. Taper pulls on translucent doors are full-height and match case trim color. Towers can be varied in height, in 1′′(25mm) increments from standard heights between 47.5′′(1207mm) and 73.5′′(1867mm). Contact Haworth Specials for ordering information.

$2952 $3044 3451

3543

$2952 $3044 3451

3543

$3287 $3387 3695

3795

$3287 $3387 3695

3795

$2759 $2846 3258

3345

$2759 $2846 3258

3345

Painted Drawer Fronts 1 Drawer Front Style: S Painted Painted Perforated file drawer front options K Meteors N Constellation Q Galaxy

2 Top Option: R Regular top T

Dome translucent top; add $423 list

2) Trim color for drawer fronts and case.* 3) Translucent color for doors. 4) Trim color for lock plug.

Wood Drawer Fronts 1) Product number, including:

1 Drawer Front Style: W Wood JTHG-6324-SU3

2 Top Option: R Regular top T

Dome translucent top; add $423 list

2) Trim color for case.* 3) Translucent color for doors. 4) Wood finish for drawer fronts. 5) Trim color for lock plug. *Note: $222 upcharge (list) for drawer fronts/case Metallic trim color.

Class FP – SIN 711-3; Discount Group XII Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

315

UniGroup Too Price List

X Series Personal Storage Towers with Bookcase for use with UniGroup Too, UniGroup, PLACES Actual Height Four-High with Bookcase

(Right) JTBB-5124

51 1/2′′ 23′′ 24′′ Box/Box/File (1308mm) (582mm) (610mm) Valet Right 24′′(610mm) Bookcase 51 1/2′′ 23′′ 24′′ Box/Box/File (1308mm) (582mm) (610mm) Valet Left 24′′(610mm) Bookcase 51 1/2′′ 23′′ 24′′ File/File (1308mm) (582mm) (610mm) Valet Right 24′′(610mm) Bookcase 51 1/2′′ 23′′ 24′′ File/File (1308mm) (582mm) (610mm) Valet Left 24′′(610mm) Bookcase

•

Radius

Linear

• • • • • • • • •

Taper

Classic

$2018

$2036

$2516

$2593

2126

1

2108 2129 $2018

2606 2627 $2516

2683 2704 $2593

1

2108 2129 $1874

2606 2627 $2360

2683 2704 $2431

1

1941 1958 $1941

2427 2444 $2427

2498 2515 $2498

2427 2444

2498 2515

2, 3 JTBB-51247, 8, 9 JTBB-51241 JTBE-51242, 3 JTBE-51247, 8, 9 JTBE-51241 JTBG-51242, 3 JTBG-51247, 8, 9 JTBG-51241 JTBJ-5124-

$2036 2126 $1907 1974 $1974

1941 1958

2, 3 JTBJ-51247, 8, 9 JTBJ-5124-

1974

1) Product number, including:

(Left) JTBJ-5124

Crescent

1

To Order, Specify:

•

Ellipse

JTBB-5124-

• • • •

•

Pull Styles

1

Number 1 2 3

(SS) (KS-NS-QS) (WW) (WW) Painted Painted Wood Wood Price Perf. Price Price I Price II

Features

•

2

Actual Actual Depth Width Description Pull

• • •

Bookcase is side access only. 24′′(610mm) bookcase unit includes one adjustable shelf. Valet locks independently with lock located below pull. Drawers lock together with lock located in right side of lock fascia. Optional translucent top adds 2 3/4′′(70mm) to overall height of unit. Optional drawer fronts include painted, painted perforated or wood. Perforated option (with liner) available on file drawer. (Not available on box drawers, valet or with Crescent, Linear and Classic pulls.) Crescent, Linear and Classic pulls are available on painted steel or wood drawer fronts only. Optional drawer pulls include Ellipse, Radius, Taper, Crescent, Linear and Classic. –Ellipse pull available in non-Metallic trim colors only. –Radius pull available in Metallic trim colors only. –Taper pull trim color matches case trim color. –Crescent, Linear and Classic pulls are brushed nickel finish. Caster option adds 3′′(76mm) to overall height. Leg option adds 5 1/8′′(130mm) to overall height. –Legs are color matched to case with black adjustment extensions. –Adjustment extensions provide 1 1/2′′(38mm) adjustment range. –Field installed. Caster and leg option limited to unit heights up to 51 1/2′′(1308mm) high. Towers can be varied in height, in 1′′(25mm) increments from standard heights between 47.5′′(1207mm) and 73.5′′(1867mm). Contact Haworth Specials for ordering information.

Leg Option Leg Option requires modification of the product number. Add L to the product number and add $176 list. Example: JTBB-5124-SS1RL

Painted Drawer/Door Fronts 1 Drawer/Door Front Style: SS Painted Painted Perforated file drawer front options KS Meteors NS Constellation QS Galaxy

2 Pull (see side bar) 3 Top Option: R Regular top T

Translucent top; add $423 list

2) Trim color for drawer/door/case.* 3) Trim color for pull (Ellipse and Radius only). • –Ellipse (Non-Metallic trim colors only) • –Radius (Metallic trim colors only; upcharge for Metallic trim on pull is included in price.) 4) Trim color for lock plug.

Wood Drawer/Door Fronts 1) Product number, including:

1 Drawer/Door Front Style: WW Wood

2 Pull (see side bar) 3 Top Option: R Regular top T

Translucent top; add $423 list

Caster Option

2) Trim color for case.*

Caster Option requires modification of the product number. Add C to the product number and add $195 list.

3) Trim color for pull (Ellipse and Radius only). • –Ellipse (Non-Metallic trim colors only) • –Radius (Metallic trim colors only; upcharge for Metallic trim on pull is included in price.)

Example: JTBB-5124-SS1RC

4) Wood finish for drawer/door fronts. 5) Trim color for lock plug. *Note: $195 upcharge (list) for drawer/door/ case Metallic trim color.

316

April 2008 / USA

Class FP – SIN 711-3; Discount Group XII Canadian Conversion Factor: Refer to haworth.com/Canada

UniGroup Too Price List

X Series Personal Storage Towers with Bookcase for use with UniGroup Too, UniGroup, PLACES

Five-High with Bookcase Upper Storage

Actual Height

Actual Depth

Actual Width

63 1/2′′ (1613mm)

23′′ (582mm)

24′′ (610mm)

63 1/2′′ (1613mm)

63 1/2′′ (1613mm)

63 1/2′′ (1613mm)

(Right) JTBB-6324

•

Crescent

1

JTBB-6324-

1

$2115

$2133

$2744 $2825

2, 3 7, 8, 9 1

JTBB-6324JTBB-6324JTBE-6324-

2250

1

2232 2226 $2115

2861 2942 2855 2936 $2744 $2825

2, 3 7, 8, 9 1

JTBE-6324JTBE-6324JTBG-6324-

1

2232 2226 $1972

2, 3 7, 8, 9 1

JTBG-6324JTBG-6324JTBJ-6324-

1

2066 2056 $1972

2, 3 7, 8, 9

JTBJ-6324JTBJ-6324-

$2133 2250 $2005 2099 $2005

2066 2056

• • • • •

Bookcase is side access only. 36′′(914mm) bookcase unit includes two adjustable shelves. Valet locks independently with lock located below pull. Drawers lock together with lock located in right side of lock fascia. Optional Dome translucent top adds 2 3/4′′(70mm) to overall height of unit. Available in white only. Optional drawer fronts include painted, painted perforated or wood. Perforated option (with liner) available on file drawer only. (Not available on box drawers, valet or with Crescent, Linear and Classic pulls.) Crescent, Linear and Classic pulls are available on painted steel or wood drawer fronts only. Optional drawer pulls include Ellipse, Radius, Taper, Crescent, Linear and Classic. –Ellipse pull available in non-Metallic trim colors only. –Radius pull available in Metallic trim colors only. –Taper pull trim color matches case trim color. –Crescent, Linear and Classic pulls are brushed nickel finish. Towers can be varied in height, in 1′′(25mm) increments from standard heights between 47.5′′(1207mm) and 73.5′′(1867mm). Contact Haworth Specials for ordering information. Available on RUSH.

2861 2942 2855 2936 $2589 $2664 2683 2758 2673 2748 $2589 $2664

2099

1) Product number, including:

•

Ellipse

24′′ (610mm)

Box/Box/File Valet Right 36′′(914mm) Bookcase Box/Box/File Valet Left 36′′(914mm) Bookcase File/File Valet Right 36′′(914mm) Bookcase File/File Valet Left 36′′(914mm) Bookcase

To Order, Specify:

•

Pull Styles

23′′ (582mm)

24′′ (610mm)

Number 1 2 3

• • • •

•

2

23′′ (582mm)

24′′ (610mm)

Pull

Features

•

(Left) JTBJ-6324

23′′ (582mm)

Description

(SS) (KS-NS-QS) (WW) (WW) Painted Painted Wood Wood Price Perf. Price Price I Price II

2683 2673

2758 2748

Painted Drawer/Door Fronts 1 Drawer/Valet Door Front Style: SS Painted Painted Perforated file drawer front options KS Meteors NS Constellation QS Galaxy

2 Pull (see side bar) 3 Top Option: R Regular top T

Dome translucent top; add $423 list

2) Trim color for drawer/door/case.* 3) Trim color for pull (Ellipse and Radius only). • –Ellipse (Non-Metallic trim colors only) • –Radius (Metallic trim colors only; upcharge for Metallic trim on pull is included in price.) 4) Trim color for lock plug.

Wood Drawer/Door Fronts Radius

1) Product number, including:

Linear

1 Drawer/Door Front Style: WW Wood Taper

Classic

2 Pull (see side bar) 3 Top Option: R Regular top T

Dome translucent top; add $423 list

2) Trim color for case.* 3) Trim color for pull (Ellipse and Radius only). • –Ellipse (Non-Metallic trim colors only) • –Radius (Metallic trim colors only; upcharge for Metallic trim on pull is included in price.) 4) Wood finish for drawer/door fronts. 5) Trim color for lock plug. *Note: $222 upcharge (list) for drawer/door/ case Metallic trim color.

Class FP – SIN 711-3; Discount Group XII Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

317

UniGroup Too Price List

X Series Personal Storage Towers with Bookcase — Translucent Door for use with UniGroup Too, UniGroup, PLACES Actual Height Five-High with Bookcase Upper Storage — Translucent Door

(Right) JTBB-6324-SU3

(Left) JTBJ-6324-SU3

Actual Depth

Actual Width

Description

63 1/2′′ 23′′ 24′′ Box/Box/File (1613mm) (584mm) (610mm) Valet Right 36′′(914mm) Bookcase Box/Box/File Valet Left 36′′(914mm) Bookcase 63 1/2′′ 23′′ 24′′ File/File (1613mm) (584mm) (610mm) Valet Right 36′′(914mm) Bookcase File/File Valet Left 36′′(914mm) Bookcase 73 1/2′′ 23′′ 24′′ Box/Box/File (1867mm) (1867mm) (610mm) Valet Right 46′′(1168mm) Bookcase Box/Box/File Valet Left 46′′(1168mm) Bookcase 73 1/2′′ 23′′ 24′′ File/File (1867mm) (584mm) (610mm) Valet Right 46′′(1168mm) Bookcase File/File Valet Left 46′′(1168mm) Bookcase

Number JTBB-6324-

1

2 U3

(Right) JTBB-7324-SU3

JTBE-6324-

U3

JTBG-6324-

U3

$2397

$2415

2723

2741

$2397

$2415

2723

2741

$2231

$2264

2557

2590

$2231

$2264

2557

2590

$2730

$2748

3118

3136

$2730

$2748

3118

3136

$2563

$2596

2951

2984

$2563

$2596

2951

2984

White

White Patterned

JTBJ-6324-

U3

White Patterned

JTBB-7324-

U3

White Patterned

JTBE-7324-

U3

White Patterned

JTBG-7324-

U3

White Patterned

JTBJ-7324-

U3

White Patterned

$2605 $2686 2931

3012

$2605 $2686 2931

3012

$2427 $2502 2753

2828

$2427 $2502 2753

2828

$2928 $3019 3316

3407

$2928 $3019 3316

3407

$2748 $2834 3136

3222

$2749 $2834 3137

3222

To Order, Specify (cont’d):

• Bookcase is side access only. • 36′′(914mm) bookcase unit includes two adjustable shelves. • 46′′(1168mm) bookcase unit includes three adjustable shelves. • Translucent door is non-locking. • Drawers lock together with lock located in right side of lock fascia. • Bookcase, shelves and valet interiors are color matched to case. • Optional Dome translucent top adds 2 3/4′′(70mm) to overall height of unit. Available in white only. • Optional drawer fronts include painted, painted perforated or wood. • Perforated option (with liner) available on file drawer only. • Personal Storage Towers with translucent doors are standard with Taper pulls only. • Taper pulls on translucent doors are full height and match case trim color. • Towers can be varied in height, in 1′′(25mm) increments from standard heights between 47.5′′(1207mm) and 73.5′′(1867mm). Contact Haworth Specials for ordering information.

Painted Drawer Fronts 1) Product number, including:

1 Drawer Front Style: S Painted Painted Perforated file drawer front options K Meteors N Constellation Q Galaxy (Left) JTBJ-7324-SU3

April 2008 / USA

White

Patterned

To Order, Specify:

318

(K-N-Q) (W) (W) Painted Wood Wood Perf. Price Price I Price II

Patterned

Features Six-High with Bookcase Upper Storage — Translucent Door

(S) Translucent Painted Color Price

Class FP – SIN 711-3; Discount Group XII Canadian Conversion Factor: Refer to haworth.com/Canada

2 Top Option: R Regular top T

Dome translucent top; add $423 list

2) Trim color for drawer fronts and case.* 3) Translucent color for doors. 4) Trim color for lock plug.

Wood Drawer Fronts 1) Product number, including:

1 Drawer Front Style: W Wood

2 Top Option: R Regular top T

Dome translucent top; add $423 list

2) Trim color for case.* 3) Translucent color for doors. 4) Wood finish for drawer fronts. 5) Trim color for lock plug. *Note: $222 upcharge (list) for drawer fronts/case Metallic trim color.

UniGroup Too Price List

X Series Combination Units — Attached for use with UniGroup Too, UniGroup, PLACES

Two-High Combination — Attached

Actual Height

Actual Depth

Actual Width

Description Pull

Number 1 2

(S) (K-N-Q) (W) (W) Painted Painted Wood Wood Price Perf. Price Price I Price II

27 1/2′′ (699mm)

18 3/4′′ (476mm)

29 7/8′′ (759mm)

File/Box/Box/ Lateral

1

JCPT-0230-

$1197

$1215

$1570

$1619

2, 3 7, 8, 9 1

JCPT-0230JCPT-0230JCPR-0230-

1290 1308 $1197

1308

1663 1681 $1570

1712 1730 $1619

2, 3 7, 8, 9

JCPR-0230JCPR-0230-

1663 1681

1712 1730

27 1/2′′ (699mm)

18 3/4′′ (476mm)

29 7/8′′ (759mm)

Box/Box/File/ Lateral

Features JCPT-S1A

JCPR-S1A

2

Pull Styles

Radius

Taper

Crescent

Linear

Classic

A A 1A A A

1290 1308

$1215 1308

To Order, Specify:

• Includes attachment hardware and adjustable side-to-side hanging bars. • 12′′(305mm) pedestal-style file drawer can accommodate legal filing side-to-side with the use of legal filing kit, separately specified. • Lock plug(s) and key(s) are shipped with random numbering unless they are specified ‘‘keyed-alike’’ or ‘‘master-keyed.’’ • Optional drawer fronts include painted, painted perforated or wood. • Perforated option available on lateral drawer only. (Not available on file and box drawers.) Liner not included. • Crescent, Linear and Classic pulls are available on painted steel or wood drawer fronts only. • Optional drawer pulls include Ellipse, Radius, Taper, Crescent, Linear and Classic. • –Ellipse pull available in non-Metallic trim colors only. • –Radius pull available in Metallic trim colors only. • –Taper pull trim color matches case trim color. • –Crescent, Linear and Classic pulls are brushed nickel finish.

Specification Tips Ellipse

1A

• Specify lateral and pedestal drawer accessories separately, as required. • Specify 12′′(305mm) pedestal-style drawer accessories separately. • Attached units must be attached under a worksurface 20′′(508mm) or deeper. • 18 3/4′′(476mm) deep storage will not work under 18′′(457mm) deep work surfaces. • Use corner brackets and/or cantilevers to attach the worksurface to the panel. • Specify worksurface height adjustment kit if mounting worksurface up to 2′′(51mm) higher than standard mounting height; specify separately.

Painted Drawer Fronts 1) Product number, including:

1 Drawer Front Style: S

Painted

Painted Perforated lateral drawer front options K Meteors N Constellation Q Galaxy

2 Pull (see side bar) 2) Trim color for drawer fronts and case.* 3) Trim color for pull (Ellipse and Radius only). • –Ellipse (Non-Metallic trim colors only) • –Radius (Metallic trim colors only; upcharge for Metallic trim on pull is included in price.) 4) Trim color for lock plug.

Wood Drawer Fronts 1) Product number, including:

1 Drawer Front Style: W Wood

2 Pull (see side bar) 2) Trim color for case.* 3) Trim color for pull (Ellipse and Radius only). • –Ellipse (Non-Metallic trim colors only) • –Radius (Metallic trim colors only; upcharge for Metallic trim on pull is included in price.) 4) Wood finish for drawer fronts. 5) Trim color for lock plug. *Note: $89 upcharge (list) for drawer fronts/case Metallic trim color.

Class FP – SIN 711-3; Discount Group XII Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

319

UniGroup Too Price List

X Series Combination Units — Attached for use with UniGroup Too, UniGroup, PLACES Actual Actual Height Depth Two-High Combination — Attached

Actual Width

Description Pull

27 1/2′′ 18 3/4′′ 29 7/8′′ Box/Box/File/ (699mm) (476mm) (759mm) Door(R)

27 1/2′′ 18 3/4′′ 29 7/8′′ Door(L)/ (699mm) (476mm) (759mm) Box/Box/File

27 1/2′′ 18 3/4′′ 29 7/8′′ File/File/ (699mm) (476mm) (759mm) Door(R) JCPB-S1A (Right)

27 1/2′′ 18 3/4′′ 29 7/8′′ Door(L)/ (699mm) (476mm) (759mm) File/File

1

Number 1 2

(SS) (KK-NN-QQ) (WW) (WW) Painted Painted Wood Wood Price Perf. Price Price I Price II

JCPB-0230-

$1397

$1433

$1765

$1820

1490 1508 $1397

1526

1858 1876 $1765

1913 1931 $1820

1858 1876 $1717

1913 1931 $1770

1784 1801 $1717

1837 1854 $1770

1784 1801

1837 1854

2, 3 JCPB-02307, 8, 9 JCPB-02301 JCPE-02302, 3 JCPE-02307, 8, 9 JCPE-02301 JCPG-02302, 3 JCPG-02307, 8, 9 JCPG-02301 JCPJ-02302, 3 JCPJ-02307, 8, 9 JCPJ-0230-

Features

JCPG-S1A (Right)

A A 1A A A 1A A A 1A A A

1490 1508 $1365 1432 1449 $1365

$1433 1526 $1416 1483 $1416

1432 1449

1483

To Order, Specify:

• Includes attachment hardware and adjustable side-to-side hanging bars. • 12′′(305mm) pedestal-style file drawer can accommodate legal filing side-to-side with use of legal filing kit, separately specified. • Units with doors include one adjustable shelf. • Standard with lock centered in front edge of top; locks drawers and door. • Lock plug(s) and key(s) are shipped with random numbering unless they are specified ‘‘keyed-alike’’ or ‘‘master-keyed.’’ • Optional drawer/door fronts include painted, painted perforated or wood. • Perforated option (with liner) available on file drawers and storage door only. (Not available on box drawer.) • Crescent, Linear and Classic pulls are available on painted steel or wood drawer fronts only. • Optional drawer pulls include Ellipse, Radius, Taper, Crescent, Linear and Classic. • –Ellipse pull available in non-Metallic trim colors only. • –Radius pull available in Metallic trim colors only. • –Taper pull trim color matches case trim color. • –Crescent, Linear and Classic pulls are brushed nickel finish.

JCPE-S1A (Left)

1A

Painted Drawer/Door Fronts 1) Product number, including:

1 Drawer/Door Front Style: SS Painted Painted Perforated file drawer/door front options KK Meteors NN Constellation QQ Galaxy

2 Pull (see side bar) 2) Trim color for drawer/door/case.* 3) Trim color for pull (Ellipse and Radius only). • –Ellipse (Non-Metallic trim colors only) • –Radius (Metallic trim colors only; upcharge for Metallic trim on pull is included in price.) 4) Trim color for lock plug.

Wood Drawer/Door Fronts 1) Product number, including:

Specification Tips

JCPJ-S1A (Left)

2

Pull Styles

Ellipse

Crescent

Radius

Linear

Taper

Classic

320

April 2008 / USA

• Specify pedestal drawer accessories separately, as required. • Specify 12′′(305mm) pedestal-style drawer accessories separately. • Attached units must be attached under a worksurface 20′′(508mm) or deeper. • 18 3/4′′(476mm) deep storage will not work under 18′′(457mm) deep work surfaces. • Use corner brackets and or cantilevers to attach the worksurface to the panel. • Specify worksurface height adjustment kit if mounting worksurface up to 2′′(51mm) higher than standard mounting height; specify separately.

1 Drawer/Door Front Style: WW Wood

2 Pull (see side bar) 2) Trim color for case.* 3) Trim color for pull (Ellipse and Radius only). • –Ellipse (Non-Metallic trim colors only) • –Radius (Metallic trim colors only; upcharge for Metallic trim on pull is included in price.) 4) Wood finish for drawer/door fronts. 5) Trim color for lock plug. *Note: $89 upcharge (list) for drawers/ door/case Metallic trim color.

Class FP – SIN 711-3; Discount Group XII Canadian Conversion Factor: Refer to haworth.com/Canada

UniGroup Too Price List

X Series Combination Units —Freestanding for use with UniGroup Too, UniGroup, PLACES

Two-High Combination — Freestanding

Actual Height

Actual Depth

Actual Width

Description Pull

Number 1 2

(S) (K-N-Q) (W) (W) Painted Painted Wood Wood Price Perf. Price Price I Price II

27 1/2′′ (699mm)

18 3/4′′ (476mm)

29 7/8′′ (759mm)

File/Box/Box/ Lateral

1

JCPT-0230-

1

$1297

$1315

$1670

$1719

2, 3 7, 8, 9 1

JCPT-0230JCPT-0230JCPR-0230-

1408

1

1390 1408 $1297

1763 1781 $1670

1812 1830 $1719

2, 3 7, 8, 9

JCPR-0230JCPR-0230-

1763 1781

1812 1830

27 1/2′′ (699mm)

JCPR-S1

Pull Styles

Ellipse

29 7/8′′ (759mm)

Box/Box/File/ Lateral

Features

JCPT-S1

2

18 3/4′′ (476mm)

Crescent

Linear

1408

To Order, Specify:

• 12′′(305mm) pedestal-style file drawer can accommodate legal filing side-to-side with the use of legal filing kit, separately specified. • Standard with installed counterweight. • Optional drawer fronts include painted, painted perforated or wood. • Lock plug(s) and key(s) are shipped with random numbering unless they are specified ‘‘keyed-alike’’ or ‘‘master-keyed.’’ • Perforated option (with liner) available on lateral drawer only. (Not available on file and box drawers.) • Crescent, Linear and Classic pulls are available on painted steel or wood drawer fronts only. • Optional drawer pulls include Ellipse, Radius, Taper, Crescent, Linear and Classic. • –Ellipse pull available in non-Metallic trim colors only. • –Radius pull available in Metallic trim colors only. • –Taper pull trim color matches case trim color. • –Crescent, Linear and Classic pulls are brushed nickel finish.

Specification Tip Radius

1390 1408

$1315

• Specify lateral and pedestal drawer accessories separately, as required.

Painted Drawer Fronts 1) Product number, including:

1 Drawer Front Style: S

Painted

Painted Perforated lateral and file drawer door front options K Meteors N Constellation Q Galaxy

2 Pull (see side bar) 2) Trim color for drawer fronts and case.* 3) Trim color for pull (Ellipse and Radius only). • –Ellipse (Non-Metallic trim colors only) • –Radius (Metallic trim colors only; upcharge for Metallic trim on pull is included in price.) 4) Trim color for lock plug.

Wood Drawer Fronts 1) Product number, including:

Taper

1 Drawer Front Style:

Classic

W Wood

2 Pull (see side bar) 2) Trim color for case.* 3) Trim color for pull (Ellipse and Radius only). • –Ellipse (Non-Metallic trim colors only) • –Radius (Metallic trim colors only; upcharge for Metallic trim on pull is included in price.) 4) Wood finish for drawer fronts. 5) Trim color for lock plug. *Note: $89 upcharge (list) for drawer fronts/case Metallic trim color.

Class FP – SIN 711-3; Discount Group XII Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

321

UniGroup Too Price List

X Series Combination Units —Freestanding for use with UniGroup Too, UniGroup, PLACES Actual Height Two-High Combination — Freestanding

Actual Depth

Actual Width

Description Pull

27 1/2′′ 18 3/4′′ 29 7/8′′ Box/Box/File/ (699mm) (476mm) (759mm) Door(R)

Door(L)/ 27 1/2′′ 18 3/4′′ 29 7/8′′ (699mm) (476mm) (759mm) Box/Box/File

27 1/2′′ 18 3/4′′ 29 7/8′′ File/File/ (699mm) (476mm) (759mm) Door(R)

JCPB-SS1 (Right)

27 1/2′′ 18 3/4′′ 29 7/8′′ Door(L)/ (699mm) (476mm) (759mm) File/File

1

Number 1 2

(SS) (KK-NN-QQ) (WW) (WW) Painted Painted Wood Wood Price Perf. Price Price I Price II

JCPB-0230-

1

$1397

$1433

$1765

$1820

1526

1

1490 1508 $1397

1858 1876 $1765

1913 1931 $1820

1

1490 1508 $1365

1858 1876 $1717

1913 1931 $1770

1

1432 1449 $1365

1784 1801 $1717

1837 1854 $1770

1784 1801

1837 1854

2, 3 JCPB-02307, 8, 9 JCPB-02301 JCPE-02302, 3 JCPE-02307, 8, 9 JCPE-02301 JCPG-02302, 3 JCPG-02307, 8, 9 JCPG-02301 JCPJ-02302, 3 JCPJ-02307, 8, 9 JCPJ-0230-

Features

JCPG-SS1 (Right)

Specification Tip

JCPJ-SS1 (Left)

• Specify pedestal drawer accessories separately, as required.

2

1526 $1416 1483 $1416

1432 1449

1483

To Order, Specify:

• Door unit includes one adjustable shelf. • Standard with lock centered in front edge of top; locks drawers and door. • Standard with installed counterweight. • Optional drawer/door fronts include painted, painted perforated or wood. • Lock plug(s) and key(s) are shipped with random numbering unless they are specified ‘‘keyed-alike’’ or ‘‘master-keyed.’’ • Perforated option (with liner) available on file drawers and storage door only. (Not available on box drawer.) • 12′′(305mm) pedestal-style file drawer can accommodate legal filing side-to-side with the use of legal filing kit, separately specified. • Crescent, Linear and Classic pulls are available on painted steel or wood drawer fronts only. • Optional drawer pulls include Ellipse, Radius, Taper, Crescent, Linear and Classic. • –Ellipse pull available in non-Metallic trim colors only. • –Radius pull available in Metallic trim colors only. • –Taper pull trim color matches case trim color. • –Crescent, Linear and Classic pulls are brushed nickel finish.

JCPE-SS1 (Left)

$1433

Painted Drawer/Door Fronts 1) Product number, including:

1 Drawer/Door Front Style: SS Painted Painted Perforated file drawer/door front options KK Meteors NN Constellation QQ Galaxy

2 Pull (see side bar) 2) Trim color for drawer/door/case.* 3) Trim color for pull (Ellipse and Radius only). • –Ellipse (Non-Metallic trim colors only) • –Radius (Metallic trim colors only; upcharge for Metallic trim on pull is included in price.) 4) Trim color for lock plug.

Wood Drawer/Door Fronts 1) Product number, including:

1 Drawer/Door Front Style:

Pull Styles

WW Wood

2 Pull (see side bar) Ellipse

Radius

2) Trim color for case.*

Crescent

3) Trim color for pull (Ellipse and Radius only). • –Ellipse (Non-Metallic trim colors only) • –Radius (Metallic trim colors only; upcharge for Metallic trim on pull is included in price.)

Linear

4) Wood finish for drawer/door fronts. 5) Trim color for lock plug. Taper

322

*Note: $89 upcharge (list) for drawers/door/case Metallic trim color.

Classic

April 2008 / USA

Class FP – SIN 711-3; Discount Group XII Canadian Conversion Factor: Refer to haworth.com/Canada

UniGroup Too Price List

X Series Combination Units —Freestanding for use with UniGroup Too, UniGroup, PLACES Actual Height Three-High Combination — Freestanding

Actual Depth

Actual Width

39 1/2′′ 18 3/4′′ 29 7/8′′ (1003mm) (476mm) (759mm)

39 1/2′′ 18 3/4′′ 35 7/8′′ (1003mm) (476mm) (911mm)

24′′(610mm)High Storage, One Lateral

24′′(610mm)High Storage, One Lateral

391/2′′ 18 3/4′′ 41 7/8′′ 24′′(610mm)(1003mm) (476mm) (1064mm) High Storage, One Lateral

JCPV-SS1

2

Description Pull 1

Number 1 2

(SS) (KK-NN-QQ) (WW) (WW) Painted Painted Wood Wood Price Perf. Price Price I Price II

JCPV-0330-

1

$1221

$1272

$1517

$1564

1339

1

1288 1305 $1322

1584 1601 $1653

1631 1648 $1704

1

1389 1406 $1413

1720 1737 $1773

1771 1788 $1828

1840 1857

1895 1912

2, 3 JCPV-03307, 8, 9 JCPV-03301 JCPV-0336-

2, 3 JCPV-03367, 8, 9 JCPV-03361 JCPV-0342-

2, 3 JCPV-03427, 8, 9 JCPV-0342-

Pull Styles Features

Ellipse

Radius

Taper

Crescent

Linear

Classic

$1373

1440 $1464

1480 1497

1531

To Order, Specify:

• Door unit includes one adjustable shelf. • Standard with lock centered in front edge of top; locks drawer. • Doors lock separately. • Lock plug(s) and key(s) are shipped with random numbering unless they are specified ‘‘keyed-alike’’ or ‘‘master-keyed.’’ • Standard with installed counterweight. • Optional drawer/door fronts include painted, painted perforated or wood. • Perforated option available on file drawer and storage doors with inner liner. (Lateral drawers do not include liner.) • Crescent, Linear and Classic pulls are available on painted steel or wood drawer fronts only. • Optional drawer pulls include Ellipse, Radius, Taper, Crescent, Linear and Classic. • –Ellipse pull available in non-Metallic trim colors only. • –Radius pull available in Metallic trim colors only. • –Taper pull trim color matches case trim color. • –Crescent, Linear and Classic pulls are brushed nickel finish.

Specification Tip • Specify lateral drawer accessories separately, as required.

Painted Drawer/Door Fronts 1) Product number, including:

1 Drawer/Door Front Style: SS Painted Painted Perforated drawer/door front options KK Meteors NN Constellation QQ Galaxy

2 Pull (see side bar) 2) Trim color for drawer/door/case.* 3) Trim color for pull (Ellipse and Radius only). • –Ellipse (Non-Metallic trim colors only) • –Radius (Metallic trim colors only; upcharge for Metallic trim on pull is included in price.) 4) Trim color for lock plug.

Wood Drawer/Door Fronts 1) Product number, including:

1 Drawer/Door Front Style: WW Wood

2 Pull (see side bar) 2) Trim color for case.* 3) Trim color for pull (Ellipse and Radius only). • –Ellipse (Non-Metallic trim colors only) • –Radius (Metallic trim colors only; upcharge for Metallic trim on pull is included in price.) 4) Wood finish for drawer/door fronts. 5) Trim color for lock plug. *Note: $117 upcharge (list) for drawers/ door/case Metallic trim color.

Class FP – SIN 711-3; Discount Group XII Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

323

UniGroup Too Price List

X Series Combination Units — Translucent Doors for use with UniGroup Too, UniGroup, PLACES Actual Height Three-High Combination — Translucent Doors

Actual Actual Depth Width Description Number

39 1/2′′ 18 3/4′′ 29 7/8′′ 24′′(610mm)(1003mm) (476mm) (759mm) high storage, one lateral drawer

JCPV-0330-

(S) (K-N-Q) (W) (W) Translucent Painted Painted Wood Wood Color Price Perf. Price Price I Price II

1 U3

White

Patterned

Features

JCPV-SU3

$1410

$1428

1694

1712

$1497 $1544

1781

1828

To Order, Specify:

• 36′′(914mm)-high storage unit includes two adjustable shelves. • 24′′(610mm)-high storage unit includes one adjustable shelf. • Combination units with translucent doors are standard with Taper pulls only. • Taper pulls on translucent doors are full-height and match case trim color. • Lock centered in front edge of top. • Drawers are locking; doors are non-locking. • Lock plug(s) and key(s) are shipped with random numbering unless they are specified ‘‘keyed-alike’’ or ‘‘master-keyed.’’ • Standard with installed counterweight. • Optional drawer fronts include painted, painted perforated or wood. • Painted perforated lateral file drawer front does not include inner liner. • Caster option adds 3′′(76mm) to overall height. • Leg option adds 5 1/8′′(130mm) to overall height. • –legs are color matched to case with black adjustment extensions. • –adjustment extensions provide 1 1/2′′(38mm) adjustment range. • –Field installed.

Painted Drawer Fronts 1) Product number, including:

1 Drawer Front Style: S

Painted

Painted Perforated drawer front options K Meteors N Constellation Q Galaxy 2) Trim color for drawer fronts and case.* 3) Translucent color for doors. 4) Trim color for lock plug.

Wood Drawer Fronts 1) Product number, including:

1 Drawer Front Style: W Wood 2) Trim color for case.*

Specification Tip

3) Translucent color for doors.

• Specify lateral file accessories separately.

5) Trim color for lock plug.

• Leg option requires modification of the product number. Add L to the product number and add $166 list.

*Note: Upcharge (list) for drawer fronts/case Metallic trim color Three-High = $117. Four-High = $146.

Example: JCPV-0330-

324

April 2008 / USA

4) Wood finish for drawer fronts.

Leg Option

U3L.

Class FP – SIN 711-3; Discount Group XII Canadian Conversion Factor: Refer to haworth.com/Canada

UniGroup Too Price List

X Series Combination Units —Freestanding for use with UniGroup Too, UniGroup, PLACES Actual Height Four-High Combination — Freestanding

Actual Depth

Actual Width

51 1/2′′ 18 3/4′′ 29 7/8′′ (1308mm) (476mm) (759mm)

51 1/2′′ 18 3/4′′ 35 7/8′′ (1308mm) (476mm) (911mm)

Description Pull 36′′(914mm)High Storage, One Lateral

36′′(914mm)High Storage, One Lateral

51 1/2′′ 18 3/4′′ 41 7/8′′ 36′′(914mm)(1308mm) (476mm) (1064mm) High Storage, One Lateral

Pull Styles

Ellipse

Radius

Taper

JCPV-0430-

1

$1376

$1427

$1800

$1853

1494

1

1443 1460 $1489

1867 1884 $1948

1920 1937 $2008

1

1556 1573 $1603

2015 2092 $2102

2075 2032 $2167

2169 2251

2234 2186

2, 3 JCPV-04307, 8, 9 JCPV-04301 JCPV-0436-

2, 3 JCPV-04367, 8, 9 JCPV-04361 JCPV-0442-

2, 3 JCPV-04427, 8, 9 JCPV-0442-

JCPV-SS1

2

1

Number 1 2

(SS) (KK-NN-QQ) (WW) (WW) Painted Painted Wood Wood Price Perf. Price Price I Price II

Crescent

Linear

Classic

Features

$1540

1607 $1654

1670 1687

1721

To Order, Specify:

• Door unit includes two adjustable shelves. • Standard with lock centered in front edge of top; locks drawer. • Doors lock separately. • Lock plug(s) and key(s) are shipped with random numbering unless they are specified ‘‘keyed-alike’’ or ‘‘master-keyed.’’ • Standard with installed counterweight. • Optional drawer/door fronts include painted, painted perforated or wood. • Painted perforated lateral file drawer front does not include inner liner. • Perforated option available on file drawer and storage doors. • Crescent, Linear and Classic pulls are available on painted steel or wood drawer fronts only. • Optional drawer pulls include Ellipse, Radius, Taper, Crescent, Linear and Classic. • –Ellipse pull available in non-Metallic trim colors only. • –Radius pull available in Metallic trim colors only. • –Taper pull trim color matches case trim color. • –Crescent, Linear and Classic pulls are brushed nickel finish.

Specification Tip • Specify lateral file accessories separately.

Painted Drawer/Door Fronts 1) Product number, including:

1 Drawer/Door Front Style: SS Painted Painted Perforated drawer/door front options KK Meteors NN Constellation QQ Galaxy

2 Pull (see side bar) 2) Trim color for drawer/door/case.* 3) Trim color for pull (Ellipse and Radius only). • –Ellipse (Non-Metallic trim colors only) • –Radius (Metallic trim colors only; upcharge for Metallic trim on pull is included in price.) 4) Trim color for lock plug.

Wood Drawer/Door Fronts 1) Product number, including:

1 Drawer/Door Front Style: WW Wood

2 Pull (see side bar) 2) Trim color for case.* 3) Trim color for pull (Ellipse and Radius only). • –Ellipse (Non-Metallic trim colors only) • –Radius (Metallic trim colors only; upcharge for Metallic trim on pull is included in price.) 4) Wood finish for drawer/door fronts. 5) Trim color for lock plug. *Note: $146 upcharge (list) for drawers/ door/case Metallic trim color.

Class FP – SIN 711-3; Discount Group XII Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

325

UniGroup Too Price List

X Series Combination Units —Freestanding for use with UniGroup Too, UniGroup, PLACES Actual Height Four-High Combination — Freestanding

Actual Depth

Actual Width

51 1/2′′ 18 3/4′′ 29 7/8′′ (1308mm) (476mm) (759mm)

51 1/2′′ 18 3/4′′ 35 7/8′′ (1308mm) (476mm) (962mm)

Description Pull 24′′(610mm)High Storage, Two Laterals

24′′(610mm)High Storage, Two Laterals

51 1/2′′ 18 3/4′′ 41 7/8′′ 24′′(610mm)(1308mm) (476mm) (1064mm) High Storage, Two Laterals

Pull Styles

Ellipse

Radius

Taper

JCPY-0430-

1

$1404

$1470

$1752

$1806

1560

1

1494 1515 $1517

1842 1863 $1925

1896 1917 $1984

1

1607 1628 $1631

2015 2036 $2082

2074 2095 $2146

2172 2193

2236 2257

2, 3 JCPY-04307, 8, 9 JCPY-04301 JCPY-0436-

2, 3 JCPY-04367, 8, 9 JCPY-04361 JCPY-0442-

2, 3 JCPY-04427, 8, 9 JCPY-0442-

JCPY-SS1

2

1

Number 1 2

(SS) (KK-NN-QQ) (WW) (WW) Painted Painted Wood Wood Price Perf. Price Price I Price II

Crescent

Linear

Classic

Features

$1583

1673 $1697

1721 1742

1787

To Order, Specify:

• Door unit includes one adjustable shelf. • Standard with lock centered in front edge of top; locks drawers. • Doors lock separately. • Lock plug(s) and key(s) are shipped with random numbering unless they are specified ‘‘keyed-alike’’ or ‘‘master-keyed.’’ • Counterweight option recommended if files are not ganged together or anchored to a fixed object; specify separately. • Optional drawer/door fronts include painted, painted perforated or wood. • Painted perforated lateral file drawer front does not include inner liner. • Perforated option available on drawers and storage doors • Crescent, Linear and Classic pulls are available on painted steel or wood drawer fronts only. • Optional drawer pulls include Ellipse, Radius, Taper, Crescent, Linear and Classic. • –Ellipse pull available in non-Metallic trim colors only. • –Radius pull available in Metallic trim colors only. • –Taper pull trim color matches case trim color. • –Crescent, Linear and Classic pulls are brushed nickel finish.

Painted Drawer/Door Fronts 1) Product number, including:

1 Drawer/Door Front Style: SS Painted Painted Perforated drawer/door front options KK Meteors NN Constellation QQ Galaxy

2 Pull (see side bar) 2) Trim color for drawer/door/case.* 3) Trim color for pull (Ellipse and Radius only). • –Ellipse (Non-Metallic trim colors only) • –Radius (Metallic trim colors only; upcharge for Metallic trim on pull is included in price.) 4) Trim color for lock plug.

Wood Drawer/Door Fronts 1) Product number, including:

Specification Tip • Specify lateral file accessories separately.

1 Drawer/Door Front Style: WW Wood

2 Pull (see side bar) 2) Trim color for case.* 3) Trim color for pull (Ellipse and Radius only). • –Ellipse (Non-Metallic trim colors only) • –Radius (Metallic trim colors only; upcharge for Metallic trim on pull is included in price.) 4) Wood finish for drawer/door fronts. 5) Trim color for lock plug. *Note: $146 upcharge (list) for drawers/ door/case Metallic trim color.

326

April 2008 / USA

Class FP – SIN 711-3; Discount Group XII Canadian Conversion Factor: Refer to haworth.com/Canada

UniGroup Too Price List

X Series Combination Units — Translucent Doors for use with UniGroup Too, UniGroup, PLACES Actual Height Four-High Combination — Translucent Doors

Actual Actual Depth Width Description Number

(S) (K-N-Q) (W) (W) Translucent Painted Painted Wood Wood Color Price Perf. Price Price I Price II

1

51 1/2′′ 18 3/4′′ 29 7/8′′ 36′′(914mm)(1308mm) (476mm) (759mm) high storage, lateral one drawer

JCPV-0430-

U3

White

$1649

$1667

$1730 $1783

51 1/2′′ 18 3/4′′ 29 7/8′′ 24′′(610mm)(1308mm) (476mm) (759mm) high storage, two lateral drawers

JCPY-0430-

U3

Patterned White

2075 $1616

2093 $1649

2156 2209 $1755 $1809

Patterned

1900

1933

Features

JCPV-SU3

JCPY-SU3

2039

2093

To Order, Specify:

• 36′′(914mm)-high storage unit includes two adjustable shelves. • 24′′(610mm)-high storage unit includes one adjustable shelf. • Combination units with translucent doors are standard with Taper pulls only. • Taper pulls on translucent doors are full-height and match case trim color. • Lock centered in front edge of top. • Drawers are locking; doors are non-locking. • Lock plug(s) and key(s) are shipped with random numbering unless they are specified ‘‘keyed-alike’’ or ‘‘master-keyed.’’ • Standard with installed counterweight. • Optional drawer fronts include painted, painted perforated or wood. • Painted perforated lateral file drawer front does not include inner liner. • Caster option adds 3′′(76mm) to overall height. • Leg option adds 5 1/8′′(130mm) to overall height. • –legs are color matched to case with black adjustment extensions. • –adjustment extensions provide 1 1/2′′(38mm) adjustment range. • –Field installed.

Painted Drawer Fronts 1) Product number, including:

1 Drawer Front Style: S

Painted

Painted Perforated drawer front options K Meteors N Constellation Q Galaxy 2) Trim color for drawer fronts and case.* 3) Translucent color for doors. 4) Trim color for lock plug.

Wood Drawer Fronts 1) Product number, including:

1 Drawer Front Style: W Wood 2) Trim color for case.*

Specification Tip

3) Translucent color for doors.

• Specify lateral file accessories separately.

4) Wood finish for drawer fronts.

Leg Option

5) Trim color for lock plug.

• Leg option requires modification of the product number. Add L to the product number and add $166 list.

*Note: Upcharge (list) for drawer fronts/case Metallic trim color Three-High = $117. Four-High = $146.

Example: JCPV-0430-

U3L.

Class FP – SIN 711-3; Discount Group XII Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

327

UniGroup Too Price List

X Series Combination Unit Accessories for use with UniGroup Too, UniGroup, PLACES

Worksurface Height Adjustment Kit for Attached Combination Unit

Height

Number

Price

1-2′′(25-51mm)

JSHA-1

$23

Features

To Order, Specify:

• Includes eight height adjustment spacers and attachment hardware. • Provides height adjustment for file-supported worksurfaces. • Raises worksurfaces in 1′′(25mm) increments up to 2′′(51mm) above standard worksurface height. • Standard in charcoal finish color only.

1) Product number. (No finish specification required.)

JSHA-1

Storage Shelf

Unit Width

Shelf Width

Shelf Depth

Shelf Thickness

Number

Price

30′′(762mm)

13 3/4′′(349mm)

16 1/2′′(419mm)

5/8′′(16mm)

JSSA-15

$39

Feature

To Order, Specify:

• Includes shelf and clips.

1) Product number.

Specification Tip

2) Trim color.*

• To be used with 2-high combination unit with storage door only.

*Note: $7 upcharge (list) for Metallic trim color.

JSSA-15

Storage Shelves

Unit Width

Shelf Width

Shelf Depth

Shelf Thickness

Number

Price

30′′(762mm) 36′′(914mm) 42′′(1067mm)

28 1/4′′(718mm) 34 1/4′′(870mm) 40 1/4′′(1022mm)

16 1/2′′(419mm)

5/8′′(16mm)

JSSA-30 JSSA-36 JSSA-42

$48 51 55

Feature

To Order, Specify:

• Includes one storage shelf and clips.

1) Product number. 2) Trim color.* *Note: $10 upcharge (list) for Metallic trim color.

JSSA

328

April 2008 / USA

Class FP – SIN 711-3; Discount Group XII Canadian Conversion Factor: Refer to haworth.com/Canada

UniGroup Too Price List

X Series Bookcases for use with UniGroup Too, UniGroup, PLACES

Two-High Bookcase

Actual Height

Actual Depth

Actual Width

Number

Price

27 1/2′′(699mm)

14′′(356mm)

29 7/8′′(759mm) 35 7/8′′(911mm) 41 7/8′′(1064mm)

JBCS-0230 JBCS-0236 JBCS-0242

$514 542 624

Feature

To Order, Specify:

• Includes one adjustable shelf.

1) Product number.

Available on RUSH. JBCS-0230 JBCS-0236 JBCS-0242

2) Trim color for case and shelves.*

Leg Option Leg option is available on 30′′-wide units and requires modification of the product number. Add L to the product number and add $169 list.

*Note: Upcharge (list) for Metallic trim color Two-High = $89.

Example: JBCS-0230-L

Three-High Bookcase

JBCS-0330 JBCS-0336 JBCS-0342

39 1/2′′(1003mm)

14′′(356mm)

29 7/8′′(759mm) 35 7/8′′(911mm) 41 7/8′′(1064mm)

JBCS-0330 JBCS-0336 JBCS-0342

$546 599 664

Feature

To Order, Specify:

• Includes two adjustable shelves.

1) Product number.

Leg Option

2) Trim color for case and shelves.*

Leg option is available on 30′′-wide units and requires modification of the product number. Add L to the product number and add $169 list.

*Note: Upcharge (list) for Metallic trim color Three-High = $117.

Example: JBCS-0230-L

Class FM – SIN 711-3; Discount Group XII Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

329

UniGroup Too Price List

X Series Bookcases for use with UniGroup Too, UniGroup, PLACES

Four-High Bookcase

Actual Height

Actual Depth

Actual Width

Number

Price

51 1/2′′(1308mm)

14′′(356mm)

29 7/8′′(759mm) 35 7/8′′(911mm) 41 7/8′′(1064mm)

JBCS-0430 JBCS-0436 JBCS-0442

$625 674 762

Feature

To Order, Specify:

• Includes three adjustable shelves.

1) Product number.

Available on RUSH.

2) Trim color for case and shelves.*

Leg Option Leg option is available on 30′′-wide units and requires modification of the product number. Add L to the product number and add $169 list.

*Note: Upcharge (list) for Metallic trim color Four-High = $146.

Example: JBCS-0430-L JBCS-0430 JBCS-0436 JBCS-0442

Five-High Bookcase

63 1/2′′(1613mm)

14′′(356mm)

29 7/8′′(759mm) 35 7/8′′(911mm) 41 7/8′′(1064mm)

JBCS-0530 JBCS-0536 JBCS-0542

Feature

To Order, Specify:

• Includes four adjustable shelves.

1) Product number.

$711 763 867

2) Trim color for case and shelves.* *Note: Upcharge (list) for Metallic trim color Five-High = $174.

JBCS-0530 JBCS-0536 JBCS-0542

Bookcase Shelf

Unit Width

Shelf Depth

Shelf Thickness

Number

Price

29 7/8′′(759mm) 35 7/8′′(911mm) 41 7/8′′(1064mm)

13 1/4′′(337mm)

5/8′′(16mm)

JBSA-30 JBSA-36 JBSA-42

$46 49 53

Feature

To Order, Specify:

• Includes shelf and clips.

1) Product number.

Available on RUSH.

Specification Tips • Bookcase shelf to be used in X Series bookcase only. JBSA

330

April 2008 / USA

Class FM – SIN 711-3; Discount Group XII Canadian Conversion Factor: Refer to haworth.com/Canada

2) Trim color.* *Note: $8 upcharge (list) for Metallic trim color.

UniGroup Too Price List

V Series Attached and Suspended Pedestals for use with UniGroup Too, UniGroup, PLACES

Box/Box/File – Attached

Actual Height

Actual Depth

Actual Width

Description

Number

Price

27 1/2′′(699mm)

17′′(432mm) 23′′(584mm) 29′′(737mm) 17′′(432mm) 23′′(584mm) 29′′(737mm)

15′′(381mm)

Box/Box/File

15′′(381mm)

File/File

VPAH-18 VPAH-24 VPAH-30 VPAJ-18 VPAJ-24 VPAJ-30

$380 403 444 $358 377 415

27 1/2′′(699mm)

VPAH-24

File/File– Attached

Features

To Order, Specify:

• • • •

1) Product number.

Includes attachment hardware. See appropriate price list for specification requirements. Glides provide 1 1/2′′(38mm) adjustment range. Attached units must be attached under a worksurface equal to or deeper than pedestal depth. • Lock plug(s) and key(s) are shipped with random numbering unless they are specified ‘‘keyed-alike’’ or ‘‘master-keyed.’’ • File drawer can accommodate legal filing front to back with the use of legal filing kits (VPL1-12, VPL2-12), separately specified. • Usable drawer is less than actual drawer depth.

2) Trim color for drawer fronts and case.* 3) Trim color for pull (non-metallic colors only). 4) Trim color for lock plug. *Note: $36 upcharge (list) for Metallic trim color.

Available on RUSH. VPAJ-24

Specification Tips • Specify pedestal drawer accessories separately, as required. • Specify worksurface height adjustment kit if mounting worksurface up to 2′′(51mm) higher than standard mounting height; specify separately. • Use corner brackets and/or cantilevers to attach the worksurface to the panel.

Box/File – Suspended

19 5/8′′(498mm) 25 5/8′′(651mm) 25 5/8′′(651mm)

VPHA-24

Box/Box/File– Suspended

17′′(432mm) 23′′(584mm) 17′′(432mm) 23′′(584mm) 17′′(432mm) 23′′(584mm)

15′′(381mm)

Box/File

15′′(381mm)

Box/Box/File

15′′(381mm)

File/File

VPHA-18 VPHA-24 VPHH-18 VPHH-24 VPHJ-18 VPHJ-24

Features

To Order, Specify:

• Includes attachment hardware. • Lock plug(s) and key(s) are shipped with random numbering unless they are specified ‘‘keyed-alike’’ or ‘‘master-keyed.’’ • File drawer can accommodate legal filing front to back with the use of legal filing kits (VPL1-12, VPL2-12), separately specified. • Usable drawer is less than actual drawer depth.

1) Product number.

$310 332 $374 393 $352 366

2) Trim color for drawer fronts and case.* 3) Trim color for pull (non-metallic colors only). 4) Trim color for lock plug. *Note: $36 upcharge (list) for Metallic trim color.

Available on RUSH.

Specification Tips VPHH-24

File/File– Suspended

• Specify pedestal drawer accessories separately, as required. • Suspended units must be suspended under a worksurface equal to or deeper than pedestal depth. • Suspended pedestals can only be used with UniGroup Too, UniGroup, PLACES, and RACE systems applications.

VPHJ-24

Class VS – SIN 711-3; Discount Group XII Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

331

UniGroup Too Price List

V Series Mobile Pedestals for use with UniGroup Too, UniGroup, PLACES

Box/File– Mobile

Actual Height

Actual Depth

Actual Width

Description

Number

Price

21 1/2′′(546mm)

17′′(432mm) 23′′(584mm) 17′′(432mm) 23′′(584mm) 29′′(737mm) 17′′(432mm) 23′′(584mm) 29′′(737m)

15′′(381mm)

Box/File

15′′(381mm)

Box/Box/File

15′′(381mm)

File/File

VPMA-18 VPMA-24 VPMH-18 VPMH-24 VPMH-30 VPMJ-18 VPMJ-24 VPMJ-30

$384 411 $473 496 547 $445 464 512

27 1/2′′(699mm)

27 1/2′′(699mm) VPMA-24

Box/Box/File– Mobile

Features

To Order, Specify:

• Casters: black, non-locking, 2 swivel (rear), 2 fixed (front). • Lock plug(s) and key(s) are shipped with random numbering unless they are specified ‘‘keyed-alike’’ or ‘‘master-keyed.’’ • File drawer can accommodate legal filing front to back with the user of legal filing kits (VPL1-12, VPL2-12), separately specified.

1) Product number.

Available on RUSH. VPMH-24

2) Trim color for drawer fronts and case. 3) Trim color for pull (non-metallic colors only). 4) Trim color for lock plug. *Note: $36 upcharge (list) for Metallic trim color.

Specification Tip • Specify pedestal drawer accessories separately as required.

File/File– Mobile

VPMJ-24

Legal Filing Kits

Description

Number

Price

Compressor, inner hanging bar 12′′ STS file conversion bars

VPL1-12 VPL2-12

$61 31

Features

To Order, Specify:

• For filing legal 12′′(305mm) pedestal drawers. • Designed to be used in V Series 23′′(584mm) and 29′′(737mm) deep pedestals only.

1) Product number. (No finish specification required.)

VPL1-12

VPL2-12

332

April 2008 / USA

Class VS – SIN 711-3; Discount Group XII Canadian Conversion Factor: Refer to haworth.com/Canada

UniGroup Too Price List

V Series Lateral Files — Attached for use with UniGroup Too, UniGroup, PLACES

Two-High — Attached

VLRD-0230-A

Actual Height

Actual Depth

Actual Width

Number

Price

27 1/2′′(699mm)

18′′(457mm)

29 7/8′′(759mm) 35 7/8′′(911mm) 41 7/8′′(1064mm)

VLRD-0230-A VLRD-0236-A VLRD-0242-A

$607 711 789

Features

To Order, Specify:

• Includes attachment hardware and adjustable side-to-side hanging bars. • See appropriate price book for specification requirements. • Drawer interiors and accessories are black. • Specify worksurface height adjustment kit if mounting worksurface up to 2′′(51mm) higher than standard mounting height; specify separately. • Lock plug(s) and key(s) are shipped with random numbering unless they are specified ‘‘keyed-alike’’ or ‘‘master-keyed.’’

1) Product number. 2) Trim color for drawer fronts and case.* 3) Trim color for pull (non-metallic colors only). 4) Trim color for lock plug. *Note: $58 upcharge (list) for drawer fronts/case metallic trim color.

Available on RUSH.

Specification Tip • Use corner brackets and/or cantilevers to attach the worksurface to the panel.

Class VS – SIN 711-3; Discount Group XII Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

333

UniGroup Too Price List

V Series Lateral Files — Freestanding for use with UniGroup Too, UniGroup, PLACES

Two-High — Freestanding

VLRD-0230

Actual Height

Actual Depth

Actual Width

Number

Price

27 1/2′′(699mm)

18′′(457mm)

29 7/8′′(759mm) 35 7/8′′(911mm) 41 7/8′′(1064mm)

VLRD-0230 VLRD-0236 VLRD-0242

$707 821 930

Features

To Order, Specify:

• Includes adjustable side-to-side hanging bars. • Two-high freestanding files are standard with installed counterweight. • Lock plug(s) and key(s) are shipped with random numbering unless they are specified ‘‘keyed-alike’’ or ‘‘master-keyed.’’ • Drawer interiors and accessories are black.

1) Product number.

39 1/2′′(1003mm)

18′′(457mm)

4) Trim color for lock plug.

29 7/8′′(759mm) 35 7/8′′(911mm) 41 7/8′′(1064mm)

VLRD-0330 VLRD-0336 VLRD-0342

Features

To Order, Specify:

• Includes adjustable side-to-side hanging bars. • Counterweight option recommended if files are not ganged together or anchored to a fixed object; specify separately. • Lock plug(s) and key(s) are shipped with random numbering unless they are specified ‘‘keyed-alike’’ or ‘‘master-keyed.’’ • Drawer interiors and accessories are black.

1) Product number.

51 1/2′′(1308mm)

$ 783 905 1036

2) Trim color for drawer fronts and case. 3) Trim color for pull (non-metallic colors only). 4) Trim color for lock plug. *Note: $77 upcharge (list) for drawer fronts/case with Metallic trim color.

Available on RUSH. VLRD-0330

Four-High — Freestanding

3) Trim color for pull (non-metallic colors only). *Note: $58 upcharge (list) for drawer fronts/case with Metallic trim color.

Available on RUSH.

Three-High — Freestanding

2) Trim color for drawer fronts and case.

18′′(457mm)

29 7/8′′(759mm) 35 7/8′′(911mm) 41 7/8′′(1064mm)

VLRD-0430 VLRD-0436 VLRD-0442

Features

To Order, Specify:

• Includes adjustable side-to-side hanging bars. • Counterweight option recommended if files are not ganged together or anchored to a fixed object; specify separately. • Lock plug(s) and key(s) are shipped with random numbering unless they are specified ‘‘keyed-alike’’ or ‘‘master-keyed.’’ • Drawer interiors and accessories are black.

1) Product number.

$ 992 1174 1343

2) Trim color for drawer fronts and case. 3) Trim color for pull (non-metallic colors only). 4) Trim color for lock plug. *Note: $97 upcharge (list) for drawer fronts/case with Metallic trim color.

Available on RUSH.

VLRD-0430

Five-High — Freestanding

63 1/2′′(1613mm)

18′′(457mm)

29 7/8′′(759mm) 35 7/8′′(911mm) 41 7/8′′(1064mm)

Features

To Order, Specify:

• Includes adjustable side-to-side hanging bars. • Counterweight option recommended if files are not ganged together or anchored to a fixed object; specify separately. • Lock plug(s) and key(s) are shipped with random numbering unless they are specified ‘‘keyed-alike’’ or ‘‘master-keyed.’’ • Drawer interiors and accessories are black.

1) Product number.

Available on RUSH.

VLRD-0530

334

April 2008 / USA

VLRD-0530 VLRD-0536 VLRD-0542

Class VS – SIN 711-3; Discount Group XII Canadian Conversion Factor: Refer to haworth.com/Canada

$1190 1397 1604

2) Trim color for drawer fronts and case. 3) Trim color for pull (non-metallic colors only). 4) Trim color for lock plug. *Note: $117 upcharge (list) for drawer fronts/case with Metallic trim color.

UniGroup Too Price List

950 Series Pedestal Dimensions for use with UniGroup Too, UniGroup, PLACES

General Information

• Steel pedestals can be specified with PLACES, UniGroup®, RACE® and PLACES steel casegoods. • Pedestals are available in standard PLACES, UniGroup, and RACE finish colors and custom color finishes. Pedestals cases are available in monochromatic finishes only. • Pedestal drawer fronts available in monochromatic finishes or wood. • Wood drawer fronts have recessed, vertical side drawer pulls. • Available with standard pull or full pull option.

• All steel pedestal models are available either locking or non-locking and can be field retrofitted. • Reference shelf option is available on all pedestals. • Conversion kits are available to convert a pedestal from one type to another (e.g. suspended to mobile). • Pedestals with full-extension 6′′(152mm) drawers are available.

Steel Pedestal Body Heights, Width, and Depths

19′′ (483mm)

22′′ (559mm)

25′′ (635mm)

19 5/8′′ (499mm)

All Pedestals are 15 3/8′′(391mm) wide.

22 7/8′′ (581mm)

28 7/8′′(733mm) (Fixed, Mobile and Stationary only)

Steel Pedestal Component Heights Suspended

Attached

Mobile

Freestanding 1/2′′(13mm) Top

1/2′′(13mm) Top 19′′(483mm), 22′′(559mm), 25′′(635mm) Overall

25′′(635mm) Case

27 7/8′′ (733mm) Overall

24 3/4′′ (629mm), 27 3/4′′ (705mm) Overall

2 7/8′′(73mm) Base

Pull Options

Integral Pull

Pedestal Drawer Filing Capacities — Lineal Inches

22′′(559mm), 25′′(635mm) Case

22′′(559mm), 25′′(635mm) Case

24 7/8′′(632mm), 27 7/8′′(708mm) Overall

23/8′′(60mm) Base

2 1/4′′(57mm) Caster

Full Pull

Full Pull Side View

Pedestal Depths Paper Size Filing Format

20′′(508mm)

24′′(610mm)

30′′(762mm)

Letter or A4 size front-to-back

15 5/8′′(397mm) with compressor

18 7/8′′(479mm) with compressor

24 7/8′′(632mm) with compressor

Letter or A4 size side-to-side

12 5/8′′(321mm)

12 5/8′′(321mm)

25 1/4′′(641mm) (two rows) 12 5/8′′(321mm) (one row) 12 3/4′′(324mm) (one row)

front-to-back (remaining)

3 1/2′′(89mm)

6 3/4′′(171mm)

Legal or Foolscap size side-to-side

12 5/8′′(321mm)

12 5/8′′(321mm)

12 5/8′′(321mm)

Letter or A4 size front-to-back (remaining)

—

3 3/4′′(95mm)

9 3/4′′(248mm)

• Compressor serves as suspension rail for side-to-side filing.

April 2008 / USA

335

UniGroup Too Price List

950 Series Suspended Pedestals — Wood Front for use with UniGroup Too, UniGroup, PLACES

Suspended Pedestal — Box/File — Wood Front

Height

Depth

Width

Description

Number

Wood Price I

Wood Price II

19′′(483mm) 19′′(483mm)

20′′(508mm) 24′′(610mm)

15 3/8′′(391mm) 15 3/8′′(391mm)

With lock

DPWS-20-ALN DPWS-24-ALN

$703 731

$725 753

Features

To Order, Specify:

• Includes one (1) side-to-side 6′′(152mm) drawer divider, one (1) pencil tray, one (1) file compressor, and attachment hardware. • 6′′/12′′(152mm/305mm) drawer stack. • Drawer interiors are black. • Suspended units must be attached under a worksurface equal to or deeper than pedestal depth.

1) Product number. 2) Drawer front wood finish color. 3) Case trim color.

Specification Tips

DPWS-A

• See appropriate price book for specification requirements. • Use corner brackets and/or cantilevers to attach the worksurface to the panel. • Suspended pedestals can only be used with RACE, UniGroup, UniGroup Too, and PLACES systems applications.

Suspended Pedestal — Box/Box/Box — Wood Front

19′′(483mm) 19′′(483mm)

20′′(508mm) 24′′(610mm)

15 3/8′′(391mm) 15 3/8′′(391mm)

With lock

DPWS-20-BLN DPWS-24-BLN

Features

To Order, Specify:

• Includes three (3) side-to-side 6′′(152mm) drawer dividers, one (1) pencil tray, and attachment hardware. • 6′′/6′′/6′′(152mm/152mm/152mm) drawer stack. • Drawer interiors are black. • Suspended units must be attached under a worksurface equal to or deeper than pedestal depth.

1) Product number.

$861 889

$883 911

2) Drawer front wood finish color. 3) Case trim color.

Specification Tips DPWS-B

• See appropriate price book for specification requirements. • Use corner brackets and/or cantilevers to attach the worksurface to the panel. • Suspended pedestals can only be used with RACE, UniGroup, UniGroup Too, and PLACES systems applications.

Suspended Pedestal — Pencil/Box/File — Wood Front

22′′(559mm) 22′′(559mm)

15 3/8′′(391mm) 15 3/8′′(391mm)

With lock

To Order, Specify:

• Includes one (1) pencil tray, one (1) side-to-side 6′′(152mm) drawer divider, one (1) file compressor, and attachment hardware. • 3′′/6′′/12′′(76mm/152mm/305mm) drawer stack. • Drawer interiors are black. • Suspended units must be attached under a worksurface equal to or deeper than pedestal depth.

1) Product number.

• See appropriate price book for specification requirements. • Use corner brackets and/or cantilevers to attach the worksurface to the panel. • Suspended pedestals can only be used with RACE, UniGroup, UniGroup Too, and PLACES systems applications.

April 2008 / USA

DPWS-20-DLN DPWS-24-DLN

Features

Specification Tips

DPWS-D

336

20′′(508mm) 24′′(610mm)

Class BA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

$893 921

2) Drawer front wood finish color. 3) Case trim color.

$916 944

UniGroup Too Price List

950 Series Suspended Pedestals — Wood Front for use with UniGroup Too, UniGroup, PLACES

Suspended Pedestal — Box/Box/File — Wood Front

Height

Depth

Width

Description

Number

Wood Price I

Wood Price II

25′′(635mm) 25′′(635mm)

20′′(508mm) 24′′(610mm)

15 3/8′′(391mm) 15 3/8′′(391mm)

With lock

DPWS-20-HLN DPWS-24-HLN

$932 960

$953 981

Features

To Order, Specify:

• Includes two (2) side-to-side 6′′(152mm) drawer dividers, one (1) pencil tray, one (1) file compressor, and attachment hardware. • 6′′/6′′/12′′(152mm/152mm/305mm) drawer stack. • Drawer interiors are black. • Suspended units must be attached under a worksurface equal to or deeper than pedestal depth.

1) Product number. 2) Drawer front wood finish color. 3) Case trim color.

Specification Tips DPWS-H

• See appropriate price book for specification requirements. • Use corner brackets and/or cantilevers to attach the worksurface to the panel. • Suspended pedestals can only be used with RACE, UniGroup, UniGroup Too, and PLACES systems applications.

Suspended Pedestal — File/File — Wood Front

25′′(635mm) 25′′(635mm)

20′′(508mm) 24′′(610mm)

15 3/8′′(391mm) 15 3/8′′(391mm)

With lock

DPWS-20-JLN DPWS-24-JLN

Features

To Order, Specify:

• • • •

1) Product number.

Includes two (2) file compressors, and attachment hardware. 12′′/12′′(305mm/305mm) drawer stack. Drawer interiors are black. Suspended units must be attached under a worksurface equal to or deeper than pedestal depth.

$834 862

$856 884

2) Drawer front wood finish color. 3) Case trim color.

Specification Tips

DPWS-J

• See appropriate price book for specification requirements. • Use corner brackets and/or cantilevers to attach the worksurface to the panel. • Suspended pedestals can only be used with RACE, UniGroup, UniGroup Too, and PLACES systems applications.

Class BA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

337

UniGroup Too Price List

950 Series Attached Pedestals — Systems Application — Wood Front for use with UniGroup Too, UniGroup, PLACES

Attached Pedestal — Box/Box/File — Wood Front

Height

Depth

Width

Description

Number

Wood Price I

Wood Price II

27 7/8′′(708mm)

20′′(508mm) 24′′(610mm) 30′′(762mm)

15 3/8′′(391mm)

With lock

DPWX-20-HLN DPWX-24-HLN DPWX-30-HLN

$1135 1171 1218

$1157 1194 1241

Features

To Order, Specify:

• Includes two (2) side-to-side 6′′(152mm) drawer dividers, one (1) pencil tray, and one (1) file compressor. • 6′′/6′′/12′′(152mm/152mm/305mm) drawer stack. • Drawer interiors are black. • Attached units must be attached under a worksurface equal to or deeper than pedestal depth.

1) Product number. 2) Drawer front wood finish color. 3) Case trim color.

Specification Tip • To be used in systems applications, not recommended for placement within PLACES Too casegoods.

DPWX-H

Attached Pedestal — File/File — Wood Front

27 7/8′′(708mm)

20′′(508mm) 24′′(610mm) 30′′(762mm)

15 3/8′′(391mm)

With lock

Features

To Order, Specify:

• • • •

1) Product number.

Includes two (2) file compressors. 12′′/12′′(305mm/305mm) drawer stack. Drawer interiors are black. Attached units must be attached under a worksurface equal to or deeper than pedestal depth.

Specification Tip • To be used in systems applications, not recommended for placement within PLACES Too casegoods.

DPWX-J

338

April 2008 / USA

DPWX-20-JLN DPWX-24-JLN DPWX-30-JLN

Class BA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

$1009 1028 1075

2) Drawer front wood finish color. 3) Case trim color.

$1034 1052 1099

UniGroup Too Price List

950 Series Mobile Pedestals — Wood Top/Front for use with UniGroup Too, UniGroup, PLACES

Mobile Pedestal — Pencil/Box/File — Wood Top and Front

Height

Depth

Width

Description

Number

Wood Price I

Wood Price II

24 3/4′′(629mm)

20′′(508mm) 24′′(610mm) 30′′(762mm)

15 3/8′′(391mm)

With lock

DPWM-20-DLN DPWM-24-DLN DPWM-30-DLN

$1255 1275 1319

$1279 1299 1343

Features

To Order, Specify:

• Includes one (1) side-to-side 6′′(152mm) drawer divider, one (1) pencil tray, and one (1) file compressor and four (4) dual wheel, full pivot casters. • 3′′/6′′/12′′(76mm/152mm/305mm) drawer stack. • Drawer interiors are black.

1) Product number. 2) Drawer front/top wood finish color. 3) Case trim color.

DPWM-D

Mobile Pedestal — Box/Box/File — Wood Top and Front

27 3/4′′(705mm)

20′′(508mm) 24′′(610mm) 30′′(762mm)

15 3/8′′(391mm)

With lock

DPWM-20-HLN DPWM-24-HLN DPWM-30-HLN

Features

To Order, Specify:

• Includes two (2) side-to-side 6′′(152mm) drawer dividers, one (1) pencil tray, and one (1) file compressor and four (4) dual wheel, full pivot casters. • 6′′/6′′/12′′(152mm/152mm/305mm) drawer stack. • Drawer interiors are black.

1) Product number.

$1293 1317 1361

$1319 1339 1383

2) Drawer front/top wood finish color. 3) Case trim color.

DPWM-H

Mobile Pedestal — File/File — Wood Top and Front

27 3/4′′(705mm)

20′′(508mm) 24′′(610mm) 30′′(762mm)

15 3/8′′(391mm)

With lock

DPWM-20-JLN DPWM-24-JLN DPWM-30-JLN

Features

To Order, Specify:

• Includes two (2) file compressors and four (4) dual wheel, full pivot casters. • 12′′/12′′(305mm/305mm) drawer stack. • Drawer interiors are black.

1) Product number.

$1156 1190 1234

$1181 1214 1258

2) Drawer front/top wood finish color. 3) Case trim color.

DPWM-J

Class BA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

339

UniGroup Too Price List

950 Series Freestanding Pedestals — Wood Top/Front for use with UniGroup Too, UniGroup, PLACES

Freestanding Pedestal — Pencil/Box/File — Wood Top and Front

Height

Depth

Width

Description

Number

Wood Price I

Wood Price II

24 7/8′′(632mm)

20′′(508mm) 24′′(610mm) 30′′(762mm)

15 3/8′′(391mm)

With lock

DPWF-20-DLN DPWF-24-DLN DPWF-30-DLN

$1137 1164 1206

$1159 1186 1228

Features

To Order, Specify:

• Includes one (1) side-to-side 6′′(152mm) drawer divider, one (1) pencil tray, and one (1) file compressor. • 3′′/6′′/12′′(76mm/152mm/305mm) drawer stack. • Drawer interiors are black.

1) Product number. 2) Drawer front/top wood finish color. 3) Case trim color.

DPWF-D

Freestanding Pedestal — Box/Box/File — Wood Top and Front

27 7/8′′(708mm)

20′′(508mm) 24′′(610mm) 30′′(762mm)

15 3/8′′(391mm)

With lock

DPWF-20-HLN DPWF-24-HLN DPWF-30-HLN

Features

To Order, Specify:

• Includes two (2) side-to-side 6′′(152mm) drawer dividers, one (1) pencil tray, and one (1) file compressor. • 6′′/6′′/12′′(152mm/152mm/305mm) drawer stack. • Drawer interiors are black.

1) Product number.

$1176 1203 1245

$1197 1224 1266

2) Drawer front/top wood finish color. 3) Case trim color.

DPWF-H

Freestanding Pedestal — File/File — Wood Top and Front

27 7/8′′(708mm)

20′′(508mm) 24′′(610mm) 30′′(762mm)

15 3/8′′(391mm)

With lock

DPWF-20-JLN DPWF-24-JLN DPWF-30-JLN

Features

To Order, Specify:

• Includes two (2) file compressors. • 12′′/12′′(305mm/305mm) drawer stack. • Drawer interiors are black.

1) Product number. 2) Drawer front/top wood finish color. 3) Case trim color.

DPWF-J

340

April 2008 / USA

Class BA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

$1063 1090 1132

$1079 1106 1148

UniGroup Too Price List

950 Series Pedestal Conversion Kits for use with UniGroup Too, UniGroup, PLACES Description Freestanding Base Conversion For 20′′(508mm)-deep drawers Kit For 24′′(610mm)-deep drawers For 30′′(762mm)-deep drawers

Number

Price

PCKS-20 PCKS-24 PCKS-30

$119 119 119

Features

To Order, Specify:

• Includes base, four (4) glides, and attachment hardware. • Converts mobile unit to freestanding. • Adds 2 3/8′′(60mm) to pedestal height.

1) Product number. 2) Trim color. Note: $23 upcharge (list) for Metallic trim color.

Specification Tip • Only use on 950 Series pedestals.

PCKS

Counterweight

Height

Depth

Width

Number

Price

21′′(533mm)-24′′(610mm)

3/16′′(5mm)

12 5/8′′(321mm)

PCWW-10

$139

Features

To Order, Specify:

• Use with 21′′(533mm)-24′′(610mm) high pedestals. • 25-pound counterweight. • Shipped separately for field installation.

1) Product number. (No finish specification required.)

Available on RUSH.

Specification Tip • Comes standard with all mobile and stationary pedestals. PCWW-10

Heavy Loading Counterweight

PCWW-15

1 5/8′′(41mm)

7 5/8′′(194mm)

14 1/2′′(368mm)

Features

To Order, Specify:

• Use with mobile or freestanding pedestals for heavier load bearing capacity above that provided by standard counterweight. • The 32-pound counterweight is used in addition to the counterweight that is standard in all mobile units. • Universal for any depth mobile or freestanding pedestal. • Shipped separately for field installation.

1) Product number. (No finish specification required.)

Mobile Caster Kit

PMCC-2

PCWW-15

PMCC-2

$334

$52

Features

To Order, Specify:

• Includes four (4) casters (two swivel and two non-swivel) and attachment hardware. • Converts freestanding unit to mobile. • Standard in black finish only.

1) Product number. (No finish specification required.)

Available on RUSH.

Specification Tip • Only use on 950 Series pedestals.

Note: Part numbers are for pedestals with 3014 and 487 date stamps. Refer to eParts price list for pedestals with date stamp 262. • The date stamp can be found on the underside of the top drawer.

Class BA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

341

UniGroup Too Price List

950 Series Suspended Pedestals for use with UniGroup Too, UniGroup, PLACES

Suspended Pedestal — Box/File

PDS-A

Height

Depth

Width

Description

Number

Price

19′′(483mm)

20′′(508mm)

15 3/8′′(391mm)

19′′(483mm)

24′′(610mm)

15 3/8′′(391mm)

With lock With lock/reference shelf With lock With lock/reference shelf

PDS-20-ALN PDS-20-ALE PDS-24-ALN PDS-24-ALE

$504 600 $542 638

Features

To Order, Specify:

• Includes one (1) side-to-side 6′′(152mm) drawer divider, one (1) pencil tray, one (1) file compressor, and attachment hardware. • 6′′/12′′(152mm/305mm) drawer stack. • Drawer interiors are black. • Available without lock, see below. • Attached units must be attached under a worksurface equal to or deeper than pedestal depth.

1) Product number. 2) Trim color.

Full Pull Option: Specify full pull option (if desired) by adding X as the 9th digit. Note: $56 upcharge (list) for Metallic trim color.

Available on RUSH.

Specification Tips • See appropriate price book for specification requirements. • Use corner brackets and/or cantilevers to attach the worksurface to the panel. • Suspended pedestals can only be used with RACE, UniGroup, UniGroup Too, and PLACES systems applications.

Suspended Pedestal —Box/Box/Box

PDS-B

19′′(483mm)

20′′(508mm)

15 3/8′′(391mm)

19′′(483mm)

24′′(610mm)

15 3/8′′(391mm)

With lock With lock/reference shelf With lock With lock/reference shelf

Features

To Order, Specify:

• Includes three (3) side-to-side 6′′(152mm) drawer dividers, one (1) pencil tray, and attachment hardware. • 6′′/6′′/6′′(152mm/152mm/152mm) drawer stack. • Drawer interiors are black. • Available without lock, see below. • Attached units must be attached under a worksurface equal to or deeper than pedestal depth.

1) Product number.

Specification Tips • See appropriate price book for specification requirements. • Use corner brackets and/or cantilevers to attach the worksurface to the panel. • Suspended pedestals can only be used with RACE, UniGroup, UniGroup Too, and PLACES systems applications.

Without Lock Option Suspended pedestal without lock requires modification of the product number and list price. Change the L in the product number to an N and deduct $21 list. Example: PDS-20-BNN=Box/Box/Box pedestal without lock.

342

April 2008 / USA

PDS-20-BLN PDS-20-BLE PDS-24-BLN PDS-24-BLE

Class BA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

$633 729 $671 767

2) Trim color.

Full Pull Option: Specify full pull option (if desired) by adding X as the 9th digit. Note: $56 upcharge (list) for Metallic trim color.

UniGroup Too Price List

950 Series Suspended Pedestals for use with UniGroup Too, UniGroup, PLACES

Suspended Pedestal —Pencil/Box/File

PDS-D

Height

Depth

Width

Description

Number

Price

22′′(559mm)

20′′(508mm)

15 3/8′′(391mm)

22′′(559mm)

24′′(610mm)

15 3/8′′(391mm)

With lock With lock/reference shelf With lock With lock/reference shelf

PDS-20-DLN PDS-20-DLE PDS-24-DLN PDS-24-DLE

$663 759 $701 797

Features

To Order, Specify:

• Includes one (1) pencil tray, one (1) side-to-side 6′′(152mm) drawer divider, and one (1) file compressor, and attachment hardware. • 3′′/6′′/12′′(76mm/152mm/305mm) drawer stack. • Drawer interiors are black. • Available without lock, see below. • Attached units must be attached under a worksurface equal to or deeper than pedestal depth.

1) Product number. 2) Trim color.

Full Pull Option: Specify full pull option (if desired) by adding X as the 9th digit. Note: $56 upcharge (list) for Metallic trim color.

Specification Tips • See appropriate price book for specification requirements. • Use corner brackets and/or cantilevers to attach the worksurface to the panel. • Suspended pedestals can only be used with RACE, UniGroup, UniGroup Too, and PLACES systems applications.

Suspended Pedestal —Pencil/Pencil/Box/File

PDS-G

25′′(635mm)

20′′(508mm)

15 3/8′′(391mm)

25′′(635mm)

24′′(610mm)

15 3/8′′(391mm)

With lock With lock/reference shelf With lock With lock/reference shelf

PDS-20-GLN PDS-20-GLE PDS-24-GLN PDS-24-GLE

Features

To Order, Specify:

• Includes one (1) pencil tray, one (1) side-to-side 6′′(152mm) drawer divider, and one (1) file compressor, and attachment hardware. • 3′′/3′′/6′′/12′′(76mm/76mm/152mm/305mm) drawer stack. • Drawer interiors are black. • Available without lock, see below. • Attached units must be attached under a worksurface equal to or deeper than pedestal depth.

1) Product number.

$821 917 $859 955

2) Trim color.

Full Pull Option: Specify full pull option (if desired) by adding X as the 9th digit. Note: $56 upcharge (list) for Metallic trim color.

Specification Tips • See appropriate price book for specification requirements. • Use corner brackets and/or cantilevers to attach the worksurface to the panel. • Suspended pedestals can only be used with RACE, UniGroup, UniGroup Too, and PLACES systems applications.

Without Lock Option Suspended pedestal without lock requires modification of the product number and list price. Change the L in the product number to an N and deduct $21 list. Example: PDS-20-GNN=Pencil/Pencil/Box/File pedestal without lock.

Class BA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

343

UniGroup Too Price List

950 Series Suspended Pedestals for use with UniGroup Too, UniGroup, PLACES

Suspended Pedestal —Box/Box/File

PDS-H

Height

Depth

Width

Description

Number

Price

25′′(635mm)

20′′(508mm)

15 3/8′′(391mm)

25′′(635mm)

24′′(610mm)

15 3/8′′(391mm)

With lock With lock/reference shelf With lock With lock/reference shelf

PDS-20-HLN PDS-20-HLE PDS-24-HLN PDS-24-HLE

$698 794 $736 832

Features

To Order, Specify:

• Includes two (2) side-to-side 6′′(152mm) drawer dividers, one (1) pencil tray, and one (1) file compressor, and attachment hardware. • 6′′/6′′/12′′(152/152mm/305mm) drawer stack. • Drawer interiors are black. • Available without lock, see below. • Attached units must be attached under a worksurface equal to or deeper than pedestal depth.

1) Product number. 2) Trim color.

Full Pull Option: Specify full pull option (if desired) by adding X as the 9th digit. Note: $56 upcharge (list) for Metallic trim color.

Specification Tips • See appropriate price book for specification requirements. • Use corner brackets and/or cantilevers to attach the worksurface to the panel. • Suspended pedestals can only be used with RACE, UniGroup, UniGroup Too, and PLACES systems applications.

Suspended Pedestal — File/File

25′′(635mm)

20′′(508mm)

15 3/8′′(391mm)

25′′(635mm)

24′′(610mm)

15 3/8′′(391mm)

With lock With lock/reference shelf With lock With lock/reference shelf

Features

To Order, Specify:

• • • • •

1) Product number.

Includes two (2) file compressors and attachment hardware. 12′′/12′′(305mm/305mm) drawer stack. Drawer interiors are black. Available without lock, see below. Attached units must be attached under a worksurface equal to or deeper than pedestal depth.

Specification Tips

PDS-J

• See appropriate price book for specification requirements. • Use corner brackets and/or cantilevers to attach the worksurface to the panel. • Suspended pedestals can only be used with RACE, UniGroup, UniGroup Too, and PLACES systems applications.

Without Lock Option Suspended pedestal without lock requires modification of the product number and list price. Change the L in the product number to an N and deduct $21 list. Example: PDS-20-HNN=Box/Box/File pedestal without lock.

344

April 2008 / USA

PDS-20-JLN PDS-20-JLE PDS-24-JLN PDS-24-JLE

Class BA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

$569 665 $607 703

2) Trim color.

Full Pull Option: Specify full pull option (if desired) by adding X as the 9th digit. Note: $56 upcharge (list) for Metallic trim color.

UniGroup Too Price List

950 Series Suspended Pedestals for use with UniGroup Too, UniGroup, PLACES

Suspended Pedestal —Pencil/Box/EDP

PDS-K

Height

Depth

Width

Description

Number

Price

25′′(635mm)

20′′(508mm)

15 3/8′′(391mm)

25′′(635mm)

24′′(610mm)

15 3/8′′(391mm)

With lock With lock/reference shelf With lock With lock/reference shelf

PDS-20-KLN PDS-20-KLE PDS-24-KLN PDS-24-KLE

$730 826 $768 864

Features

To Order, Specify:

• Includes one (1) pencil tray, one (1) side-to-side 6′′(152mm) drawer divider, and one (1) file compressor and attachment hardware. • 3′′/6′′/15′′(76mm/152mm/381mm) drawer stack. • Drawer interiors are black. • Available without lock, see below. • Attached units must be attached under a worksurface equal to or deeper than pedestal depth.

1) Product number. 2) Trim color.

Full Pull Option: Specify full pull option (if desired) by adding X as the 9th digit. Note: $58 upcharge (list) for Metallic trim color.

Specification Tips • See appropriate price book for specification requirements. • Use corner brackets and/or cantilevers to attach the worksurface to the panel. • Suspended pedestals can only be used with RACE, UniGroup, UniGroup, UniGroup Too, and PLACES systems applications.

Without Lock Option Suspended pedestal without lock requires modification of the product number and list price. Change the L in the product number to an N and deduct $21 list. Example: PDS-20-KNN=Pencil/Box/EDP pedestal without lock.

Class BA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

345

UniGroup Too Price List

950 Series Attached Pedestals — Systems Application for use with UniGroup Too, UniGroup, PLACES

Attached Pedestal — Pencil/Pencil/Box/File

PDX-G

Height

Depth

Width

Description

Number

Price

27 7/8′′(708mm)

20′′(508mm)

15 3/8′′(391mm)

27 7/8′′(708mm)

24′′(610mm)

15 3/8′′(391mm)

27 7/8′′(708mm)

30′′(762mm)

15 3/8′′(391mm)

With lock With lock reference shelf With lock With lock/reference shelf With lock With lock/reference shelf

PDX-20-GLN PDX-20-GLE PDX-24-GLN PDX-24-GLE PDX-30-GLN PDX-30-GLE

$ 996 1097 $1026 1127 $1070 1171

Features

To Order, Specify:

• Includes one (1) pencil tray, one (1) side-to-side 6′′(152mm) drawer divider, one (1) file compressor, and attachment hardware. • 3′′/3′′/6′′/12′′(76mm/76mm/152mm/305mm) drawer stack. • Attached pedestals include four glides with a height adjustment of 1′′(25mm). • Drawer interiors are black. • Available without lock, see below. • Attached units must be attached under a worksurface equal to or deeper than pedestal depth.

1) Product number. 2) Trim color.

Full Pull Option: Specify full pull option (if desired) by adding X as the 9th digit. Note: $58 upcharge (list) for Metallic trim color.

Specification Tips • See appropriate price book for specification requirements. • Use corner brackets and/or cantilevers to attach the worksurface to the panel. • Suspended pedestals can only be used with RACE, UniGroup, UniGroup Too, and PLACES systems applications. • To be used in system applications, not recommended for placement within PLACES Too Casegoods.

Attached Pedestal — Box/Box/File

PDX-H

27 7/8′′(708mm)

20′′(508mm)

15 3/8′′(391mm)

27 7/8′′(708mm)

24′′(610mm)

15 3/8′′(391mm)

27 7/8′′(708mm)

30′′(762mm)

15 3/8′′(391mm)

With lock With lock/reference shelf With lock With lock/reference shelf With lock With lock/reference shelf

Features

To Order, Specify:

• Includes two (2) side-to-side 6′′(152mm) drawer dividers, one (1) pencil tray, one (1) file compressor, and attachment hardware. • 6′′/6′′/12′′(152mm/152mm/305mm) drawer stack. • Attached pedestals include four glides with a height adjustment of 1′′(25mm). • Drawer interiors are black. • Available without lock, see below. • Attached units must be attached under a worksurface equal to or deeper than pedestal depth.

1) Product number.

Specification Tips • See appropriate price book for specification requirements. • Use corner brackets and/or cantilevers to attach the worksurface to the panel. • Suspended pedestals can only be used with RACE, UniGroup, UniGroup Too, and PLACES systems applications. • To be used in system applications, not recommended for placement within PLACES Too Casegoods.

Without Lock Option Suspended pedestal without lock requires modification of the product number and list price. Change the L in the product number to an N and deduct $21 list. Example: PDX-20-GNN=Pencil/Pencil/Box/File pedestal without lock.

346

April 2008 / USA

PDX-20-HLN PDX-20-HLE PDX-24-HLN PDX-24-HLE PDX-30-HLN PDX-30-HLE

Class BA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

$ 859 960 $ 889 990 $ 933 1034

2) Trim color.

Full Pull Option: Specify full pull option (if desired) by adding X as the 9th digit. Note: $58 upcharge (list) for Metallic trim color.

UniGroup Too Price List

950 Series Attached Pedestals — Systems Application for use with UniGroup Too, UniGroup, PLACES

Attached Pedestal —Box/Box/Box/Box

PDX-I

Height

Depth

Width

Description

Number

Price

27 7/8′′(708mm)

20′′(508mm)

15 3/8′′(391mm)

27 7/8′′(708mm)

24′′(610mm)

15 3/8′′(391mm)

27 7/8′′(708mm)

30′′(762mm)

15 3/8′′(391mm)

With lock With lock/reference shelf With lock With lock/reference shelf With lock With lock/reference shelf

PDX-20-ILN PDX-20-ILE PDX-24-ILN PDX-24-ILE PDX-30-ILN PDX-30-ILE

$ 999 1100 $1029 1130 $1073 1174

Features

To Order, Specify:

• Includes four (4) side-to-side 6′′(152mm) drawer dividers, one (1) pencil tray, and attachment hardware. • 6′′/6′′/6′′/6′′(152mm/152mm/152mm/152mm) drawer stack. • Drawer interiors are black. • Attached pedestals include four glides with a height adjustment of 1′′(25mm). • Available without lock, see below. • Fixed pedestals are not counterweighted, and must be attached to underside of a systems worksurface or casegood top.

1) Product number. 2) Trim color.

Full Pull Option: Specify full pull option (if desired) by adding X as the 9th digit. Note: $58 upcharge (list) for Metallic trim color.

Specification Tips • See appropriate price book for specification requirements. • Use corner brackets and/or cantilevers to attach the worksurface to the panel. • Suspended pedestals can only be used with RACE, UniGroup, UniGroup Too, and PLACES systems applications. • To be used in system applications, not recommended for placement within PLACES Too Casegoods.

Attached Drawer Pedestal — File/File

PDX-J

27 7/8′′(708mm)

20′′(508mm)

15 3/8′′(391mm)

27 7/8′′(708mm)

24′′(610mm)

15 3/8′′(391mm)

27 7/8′′(708mm)

30′′(762mm)

15 3/8′′(391mm)

With lock With lock/reference shelf With lock With lock/reference shelf With lock With lock/reference shelf

PDX-20-JLN PDX-20-JLE PDX-24-JLN PDX-24-JLE PDX-30-JLN PDX-30-JLE

Features

To Order, Specify:

• Includes two (2) file compressors, and attachment hardware. • 12′′/12′′(305mm/305mm) drawer stack. • Attached pedestals include four glides with a height adjustment of 1′′(25mm). • Drawer interiors are black. • Available without lock, see below. • Attached units must be attached under a worksurface equal to or deeper than pedestal depth.

1) Product number.

$717 818 $747 848 $791 892

2) Trim color.

Full Pull Option: Specify full pull option (if desired) by adding X as the 9th digit. Note: $57 upcharge (list) for Metallic trim color.

Specification Tips • See appropriate price book for specification requirements. • Use corner brackets and/or cantilevers to attach the worksurface to the panel. • Suspended pedestals can only be used with RACE, UniGroup, UniGroup Too, and PLACES systems applications. • To be used in system applications, not recommended for placement within PLACES Too Casegoods.

Without Lock Option Attached pedestal without lock requires modification of the product number and list price. Change the L in the product number to an N and deduct $21 list. Example: PDX-20-JNN=File/File pedestal without lock.

Class BA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

347

UniGroup Too Price List

950 Series Attached Pedestals — Systems Application for use with UniGroup Too, UniGroup, PLACES

Attached Drawer Pedestal — Pencil/Box/EDP

PDX-K

Height

Depth

Width

Description

Number

Price

27 7/8′′(708mm)

20′′(508mm)

15 3/8′′(391mm)

27 7/8′′(708mm)

24′′(610mm)

15 3/8′′(391mm)

27 7/8′′(708mm)

30′′(762mm)

15 3/8′′(391mm)

With lock With lock/reference shelf With lock With lock/reference shelf With lock With lock/reference shelf

PDX-20-KLN PDX-20-KLE PDX-24-KLN PDX-24-KLE PDX-30-KLN PDX-30-KLE

$ 893 994 $ 923 1024 $ 967 1068

Features

To Order, Specify:

• Includes one (1) pencil tray, one (1) side-to-side 6′′(152mm) drawer divider, one (1) file compressor, and attachment hardware. • 3′′/6′′/15′′(76mm/152mm/381mm) drawer stack. • Attached pedestals include four glides with a height adjustment of 1′′(25mm). • Drawer interiors are black. • Available without lock, see below. • Attached units must be attached under a worksurface equal to or deeper than pedestal depth.

1) Product number.

Specification Tips • See appropriate price book for specification requirements. • Use corner brackets and/or cantilevers to attach the worksurface to the panel. • Suspended pedestals can only be used with RACE, UniGroup, UniGroup Too, and PLACES systems applications. • To be used in system applications, not recommended for placement within PLACES Too Casegoods.

Without Lock Option Attached pedestal without lock requires modification of the product number and list price. Change the L in the product number to an N and deduct $21 list. Example: PDX-20-KNN=Pencil/Box/EDP pedestal without lock.

348

April 2008 / USA

Class BA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

2) Trim color.

Full Pull Option: Specify full pull option (if desired) by adding X as the 9th digit. Note: $57 upcharge (list) for Metallic trim color.

UniGroup Too Price List

950 Series Mobile Pedestals for use with UniGroup Too, UniGroup, PLACES

Mobile Pedestal — Pencil/Box/File

PDM-D

Height

Depth

Width

Description

Number

Price

24 3/4′′(629mm)

20′′(508mm)

15 3/8′′(391mm)

24 3/4′′(629mm)

24′′(610mm)

15 3/8′′(391mm)

24 3/4′′(629mm)

30′′(762mm)

15 3/8′′(391mm)

With lock With lock/reference shelf With lock With lock/reference shelf With lock With lock/reference shelf

PDM-20-DLN PDM-20-DLE PDM-24-DLN PDM-24-DLE PDM-30-DLN PDM-30-DLE

$1092 1204 $1122 1234 $1171 1283

Features

To Order, Specify:

• Includes one (1) pencil tray, one (1) side-to-side 6′′(152mm) drawer divider, and one (1) file compressor. • 3′′/6′′/12′′(76mm/152mm/305mm) drawer stack. • Drawer interiors are black. • Mobile drawers include four (4) dual wheel casters—two swivel and two non-swivel. • Available without lock, see below.

1) Product number. 2) Trim color.

Full Pull Option: Specify full pull option (if desired) by adding X as the 9th digit. Note: $58 upcharge (list) for Metallic trim color.

Mobile Pedestal — Pencil/Pencil/Box/File

PDM-G

27 3/4′′(705mm)

20′′(508mm)

15 3/8′′(391mm)

27 3/4′′(705mm)

24′′(610mm)

15 3/8′′(391mm)

27 3/4′′(705mm)

30′′(762mm)

15 3/8′′(391mm)

With lock With lock/reference shelf With lock With lock/reference shelf With lock With lock/reference shelf

PDM-20-GLN PDM-20-GLE PDM-24-GLN PDM-24-GLE PDM-30-GLN PDM-30-GLE

Features

To Order, Specify:

• Includes one (1) pencil tray, one (1) side-to-side 6′′(152mm) drawer divider, and one (1) file compressor. • 3′′/3′′/6′′/12′′(76mm/76mm/152mm/305mm) drawer stack. • Drawer interiors are black. • Mobile drawers include four (4) dual wheel casters—two swivel and two non-swivel. • Available without lock, see below.

1) Product number.

$1270 1382 $1300 1412 $1349 1461

2) Trim color.

Full Pull Option: Specify full pull option (if desired) by adding X as the 9th digit. Note: $58 upcharge (list) for Metallic trim color.

Mobile Pedestal — Box/Box/File

PDM-H

27 3/4′′(705mm)

20′′(508mm)

15 3/8′′(391mm)

27 3/4′′(705mm)

24′′(610mm)

15 3/8′′(391mm)

27 3/4′′(705mm)

30′′(762mm)

15 3/8′′(391mm)

With lock With lock/reference shelf With lock With lock/reference shelf With lock With lock/reference shelf

PDM-20-HLN PDM-20-HLE PDM-24-HLN PDM-24-HLE PDM-30-HLN PDM-30-HLE

Features

To Order, Specify:

• Includes two (2) side-to-side 6′′(152mm) drawer dividers, one (1) pencil tray, and one (1) file compressor. • 6′′/6′′/12′′(152mm/152mm/305mm) drawer stack. • Drawer interiors are black. • Mobile drawers include four (4) dual wheel casters—two swivel and two non-swivel. • Available without lock, see below.

1) Product number.

$1133 1245 $1163 1275 $1212 1324

2) Trim color.

Full Pull Option: Specify full pull option (if desired) by adding X as the 9th digit. Note: $58 upcharge (list) for Metallic trim color.

Without Lock Option Mobile pedestal without lock requires modification of the product number and list price. Change the L in the product number to an N and deduct $21 list. Example: PDM-20-HNN=Box/Box/File pedestal without lock.

Class BA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

349

UniGroup Too Price List

950 Series Mobile Pedestals for use with UniGroup Too, UniGroup, PLACES

Mobile Pedestal — File/File

PDM-J

Height

Depth

Width

Description

Number

Price

27 3/4′′(705mm)

20′′(508mm)

15 3/8′′(391mm)

27 3/4′′(705mm)

24′′(610mm)

15 3/8′′(391mm)

27 3/4′′(705mm)

30′′(762mm)

15 3/8′′(391mm)

With lock With lock/reference shelf With lock With lock/reference shelf With lock With lock/reference shelf

PDM-20-JLN PDM-20-JLE PDM-24-JLN PDM-24-JLE PDM-30-JLN PDM-30-JLE

$ 987 1099 $1017 1129 $1066 1178

Features

To Order, Specify:

• • • • •

1) Product number.

Includes two (2) file compressors. 12′′/12′′(305mm/305mm) drawer stack. Drawer interiors are black. Available without lock, see below. Mobile drawers include four (4) dual wheel casters—two swivel and two non-swivel.

2) Trim color.

Full Pull Option: Specify full pull option (if desired) by adding X as the 9th digit. Note: $58 upcharge (list) for Metallic trim color.

Mobile Pedestal — Pencil/Box/EDP

PDM-K

27 3/4′′(705mm)

20′′(508mm)

15 3/8′′(391mm)

27 3/4′′(705mm)

24′′(610mm)

15 3/8′′(391mm)

27 3/4′′(705mm)

30′′(762mm)

15 3/8′′(391mm)

With lock With lock/reference shelf With lock With lock/reference shelf With lock With lock/reference shelf

PDM-20-KLN PDM-20-KLE PDM-24-KLN PDM-24-KLE PDM-30-KLN PDM-30-KLE

Features

To Order, Specify:

• Includes one (1) pencil tray, one (1) side-to-side 6′′(152mm) drawer divider, and one (1) file compressor. • 3′′/6′′/15′′(76mm/152mm/381mm) drawer stack. • Drawer interiors are black. • Mobile drawers include four (4) dual wheel casters—two swivel and two non-swivel. • Available without lock, see below.

1) Product number.

$1168 1280 $1198 1310 $1247 1359

2) Trim color.

Full Pull Option: Specify full pull option (if desired) by adding X as the 9th digit. Note: $58 upcharge (list) for Metallic trim color.

Without Lock Option Mobile pedestal without lock requires modification of the product number and list price. Change the L in the product number to an N and deduct $21 list. Example: PDM-20-JNN=File/File pedestal without lock.

350

April 2008 / USA

Class BA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

UniGroup Too Price List

950 Series Freestanding Pedestals for use with UniGroup Too, UniGroup, PLACES

Freestanding Pedestal— Pencil/Box/File

PDF-D

Height

Depth

Width

Description

Number

Price

24 7/8′′(632mm)

20′′(508mm)

15 3/8′′(391mm)

24 7/8′′(632mm)

24′′(610mm)

15 3/8′′(391mm)

24 7/8′′(632mm)

30′′(762mm)

15 3/8′′(391mm)

With lock With lock/reference shelf With lock With lock/reference shelf With lock With lock/reference shelf

PDF-20-DLN PDF-20-DLE PDF-24-DLN PDF-24-DLE PDF-30-DLN PDF-30-DLE

$ 917 1011 $ 944 1038 $ 983 1077

Features

To Order, Specify:

• Includes one (1) pencil tray, one (1) side-to-side 6′′(152mm) drawer divider, and one (1) file compressor. • 3′′/6′′/12′′(76mm/152mm/305mm) drawer stack. • Freestanding pedestals include four glides with a height adjustment of 1′′(25mm). • Drawer interiors are black. • Available without lock, see below.

1) Product number. 2) Trim color.

Full Pull Option: Specify full pull option (if desired) by adding X as the 9th digit. Note: $58 upcharge (list) for Metallic trim color.

Freestanding Pedestal — Pencil/Pencil/Box/File

PDF-G

27 7/8′′(708mm)

20′′(508mm)

15 3/8′′(391mm)

27 7/8′′(708mm)

24′′(610mm)

15 3/8′′(391mm)

27 7/8′′(708mm)

30′′(762mm)

15 3/8′′(391mm)

With lock With lock/reference shelf With lock With lock/reference shelf With lock With lock/reference shelf

PDF-20-GLN PDF-20-GLE PDF-24-GLN PDF-24-GLE PDF-30-GLN PDF-30-GLE

Features

To Order, Specify:

• Includes one (1) pencil tray, one (1) side-to-side 6′′(152mm) drawer divider, and one (1) file compressor. • 3′′/3′′/6′′/12′′(76mm/76mm/152mm/305mm) drawer stack. • Freestanding pedestals include four glides with a height adjustment of 1′′(25mm). • Drawer interiors are black. • Available without lock, see below.

1) Product number.

$1066 1160 $1093 1187 $1132 1226

2) Trim color.

Full Pull Option: Specify full pull option (if desired) by adding X as the 9th digit. Note: $58 upcharge (list) for Metallic trim color.

Freestanding Pedestal — Box/Box/File

PDF-H

27 7/8′′(708mm)

20′′(508mm)

15 3/8′′(391mm)

27 7/8′′(708mm)

24′′(610mm)

15 3/8′′(391mm)

27 7/8′′(708mm)

30′′(762mm)

15 3/8′′(391mm)

With lock With lock/reference shelf With lock With lock/reference shelf With lock With lock/reference shelf

PDF-20-HLN PDF-20-HLE PDF-24-HLN PDF-24-HLE PDF-30-HLN PDF-30-HLE

Features

To Order, Specify:

• Includes two (2) side-to-side 6′′(152mm) drawer dividers, one (1) pencil tray, and one (1) file compressor. • 6′′/6′′/12′′(152mm/152mm/305mm) drawer stack. • Freestanding pedestals include four glides with a height adjustment of 1′′(25mm). • Drawer interiors are black. • Available without lock, see below.

1) Product number.

$ 950 1044 $ 977 1071 $1016 1110

2) Trim color.

Full Pull Option: Specify full pull option (if desired) by adding X as the 9th digit. Note: $58 upcharge (list) for Metallic trim color.

Without Lock Option Freestanding pedestal without lock requires modification of the product number and list price. Change the L in the product number to an N and deduct $21 list. Example: PDF-20-DNN=Pencil/Box/File pedestal without lock.

Class BA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

351

UniGroup Too Price List

950 Series Freestanding Pedestals for use with UniGroup Too, UniGroup, PLACES

Freestanding Pedestal— File/File

PDF-J

Height

Depth

Width

Description

Number

Price

27 7/8′′(708mm)

20′′(508mm)

15 3/8′′(391mm)

27 7/8′′(708mm)

24′′(610mm)

15 3/8′′(391mm)

27 7/8′′(708mm)

30′′(762mm)

15 3/8′′(391mm)

With lock With lock/reference shelf With lock With lock/reference shelf With lock With lock/reference shelf

PDF-20-JLN PDF-20-JLE PDF-24-JLN PDF-24-JLE PDF-30-JLN PDF-30-JLE

$829 923 $856 950 $895 989

Features

To Order, Specify:

• Includes two (2) file compressors. • 12′′/12′′(305mm/305mm) drawer stack. • Freestanding pedestals include four glides with a height adjustment of 1′′(25mm). • Drawer interiors are black. • Available without lock, see below.

1) Product number. 2) Trim color.

Full Pull Option: Specify full pull option (if desired) by adding X as the 9th digit. Note: $58 upcharge (list) for Metallic trim color.

Freestanding Pedestal —Pencil/Box/EDP

PDF-K

27 7/8′′(708mm)

20′′(508mm)

15 3/8′′(391mm)

27 7/8′′(708mm)

24′′(610mm)

15 3/8′′(391mm)

27 7/8′′(708mm)

30′′(762mm)

15 3/8′′(391mm)

With lock With lock/reference shelf With lock With lock/reference shelf With lock With lock/reference shelf

PDF-20-KLN PDF-20-KLE PDF-24-KLN PDF-24-KLE PDF-30-KLN PDF-30-KLE

Features

To Order, Specify:

• Includes one (1) pencil tray, one (1) side-to-side 6′′(152mm) drawer divider, and one (1) file compressor. • 3′′/6′′/15′′(76mm/152mm/381mm) drawer stack. • Freestanding pedestals include four glides with a height adjustment of 1′′(25mm). • Drawer interiors are black. • Available without lock, see below.

1) Product number.

$ 981 1075 $1008 1102 $1047 1141

2) Trim color.

Full Pull Option: Specify full pull option (if desired) by adding X as the 9th digit. Note: $58 upcharge (list) for Metallic trim color.

Without Lock Option Freestanding pedestal without lock requires modification of the product number and list price. Change the L in the product number to an N and deduct $21 list. Example: PDF-20-JNN=File/File pedestal without lock.

352

April 2008 / USA

Class BA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

UniGroup Too Price List

950 Series Pedestal Conversion Kits for use with UniGroup Too, UniGroup, PLACES

Attached Base Conversion Kit

Description

Number

Price

20′′(508mm) pedestal depth for 24′′(610mm)-high drawer stack 24′′(610mm) pedestal depth for 24′′(610mm)-high drawer stack 30′′(762mm) pedestal depth for 24′′(610mm)-high drawer stack

PCKX-2024 PCKX-2424 PCKX-3024

$157 157 157

Features

To Order, Specify:

• • • •

1) Product number.

Includes base, four (4) glides, and attachment hardware. Converts suspended pedestal to attached pedestal. Designed to attach to pedestal and support a worksurface. Adds 2 7/8′′(73mm) to pedestal height.

2) Trim color. Note: $24 upcharge (list) for Metallic trim color.

Specification Tip • Only use on 950 Series pedestals. PCKX

Attached Conversion Kit

20′′(508mm) pedestal depth for 24′′(610mm)-high drawer stack 24′′(610mm) pedestal depth for 24′′(610mm)-high drawer stack 30′′(762mm) pedestal depth for 24′′(610mm)-high drawer stack

PCKB-2024 PCKB-2424 PCKB-3024

Features

To Order, Specify:

• Includes top, counterweight, and attachment hardware. • Converts fixed pedestal to a freestanding pedestal that is independent of the worksurface. • Pedestal will not fit under a worksurface set at 29′′(737mm) height. • Adds 1/2′′(13mm) to pedestal height.

1) Product number.

$181 181 181

2) Trim color. Note: $24 upcharge (list) for Metallic trim color.

Specification Tip PCKB

• Only use on 950 Series pedestals.

Freestanding Conversion Kit

20′′(508mm) pedestal depth for 21′′(533mm)-high drawer stack 20′′(508mm) pedestal depth for 24′′(610mm)-high drawer stack 24′′(610mm) pedestal depth for 21′′(533mm)-high drawer stack 24′′(610mm) pedestal depth for 24′′(610mm)-high drawer stack 30′′(762mm) pedestal depth for 24′′(610mm)-high drawer stack

PCKF-2021 PCKF-2024 PCKF-2421 PCKF-2424 PCKF-3024

Features

To Order, Specify:

• Includes top, base, four (4) glides, counterweight, and attachment hardware. • Converts attached or fixed pedestals to freestanding pedestal. • Adds 2 7/8′′(73mm) to pedestal height.

1) Product number.

$246 246 246 246 246

2) Trim color. Note: $30 upcharge (list) for Metallic trim color.

Specification Tip PCKF

• Only use on 950 Series pedestals.

Note: Part numbers are for pedestals with 3014 and 487 date stamps. Refer to eParts price list for pedestals with date stamp 262. • The date stamp can be found on the underside of the top drawer.

Class BA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

353

UniGroup Too Price List

950 Series Pedestal Conversion Kits for use with UniGroup Too, UniGroup, PLACES

Mobile Conversion Kit

Description

Number

Price

20′′(508mm) pedestal depth for 21′′(533mm)-high drawer stack 20′′(508mm) pedestal depth for 24′′(610mm)-high drawer stack 24′′(610mm) pedestal depth for 21′′(533mm)-high drawer stack 24′′(610mm) pedestal depth for 24′′(610mm)-high drawer stack 30′′(762mm) pedestal depth for 24′′(610mm)-high drawer stack

PCKM-2021 PCKM-2024 PCKM-2421 PCKM-2424 PCKM-3024

$284 284 284 284 284

Features

To Order, Specify:

• Includes top, counterweight, four (4) casters (two-swivel and two non-swivel), and attachment hardware. • Converts suspended or fixed pedestals to mobile pedestal. • Adds 2 3/4′′(70mm) to pedestal height.

1) Product number.

Specification Tip • Only use on 950 Series pedestals.

PCKM

Note: Part numbers are for pedestals with 3014 and 487 date stamps. Refer to eParts price list for pedestals with date stamp 262. • The date stamp can be found on the underside of the top drawer.

354

April 2008 / USA

Class BA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

2) Trim color. Note: $30 upcharge (list) for Metallic trim color.

UniGroup Too Price List

950 Series Pedestal Conversion Kits for use with UniGroup Too, UniGroup, PLACES Description Freestanding Base Conversion For 20′′(508mm)-deep drawers Kit For 24′′(610mm)-deep drawers For 30′′(762mm)-deep drawers

Number

Price

PCKS-20 PCKS-24 PCKS-30

$119 119 119

Features

To Order, Specify:

• Includes base, four (4) glides, and attachment hardware. • Converts mobile unit to freestanding. • Adds 2 3/8′′(60mm) to pedestal height.

1) Product number. 2) Trim color. Note: $23 upcharge (list) for Metallic trim color.

Specification Tip • Only use on 950 Series pedestals.

PCKS

Counterweight

Height

Depth

Width

Number

Price

21′′(533mm)-24′′(610mm)

3/16′′(5mm)

12 5/8′′(321mm)

PCWW-10

$139

Features

To Order, Specify:

• Use with 21′′(533mm)-24′′(610mm) high pedestals. • 25-pound counterweight. • Shipped separately for field installation.

1) Product number. (No finish specification required.)

Available on RUSH.

Specification Tip • Comes standard with all mobile and stationary pedestals. PCWW-10

Heavy Loading Counterweight

PCWW-15

1 5/8′′(41mm)

7 5/8′′(194mm)

14 1/2′′(368mm)

Features

To Order, Specify:

• Use with mobile or freestanding pedestals for heavier load bearing capacity above that provided by standard counterweight. • The 32-pound counterweight is used in addition to the counterweight that is standard in all mobile units. • Universal for any depth mobile or freestanding pedestal. • Shipped separately for field installation.

1) Product number. (No finish specification required.)

Mobile Caster Kit

PMCC-2

PCWW-15

PMCC-2

$334

$52

Features

To Order, Specify:

• Includes four (4) casters (two swivel and two non-swivel) and attachment hardware. • Converts freestanding unit to mobile. • Standard in black finish only.

1) Product number. (No finish specification required.)

Available on RUSH.

Specification Tip • Only use on 950 Series pedestals.

Note: Part numbers are for pedestals with 3014 and 487 date stamps. Refer to eParts price list for pedestals with date stamp 262. • The date stamp can be found on the underside of the top drawer.

Class BA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

355

UniGroup Too Price List

950 Series Pedestal Accessories for use with UniGroup Too, UniGroup, PLACES

Pencil Tray

Height

Depth

Width

Number

Price

1 1/4′′(32mm)

5 1/2′′(140mm)

12 7/8′′(327mm)

PPT-3

$24

Features

To Order, Specify:

• Suspends from and slides on sides of 3′′(76mm) or 6′′(152mm) drawer. • Standard in black finish color only.

1) Product number. (No finish specification required.)

Available on RUSH. PPT-3

Stationery Organizer

4′′(102mm)

9′′(229mm)

12 5/8′′(321mm)

PSO-6

$43

Features

To Order, Specify:

• • • •

1) Product number. (No finish specification required.)

Includes box of six (6) organizers. Divides 6′′(152mm) drawer into angled bins for stationery. Inserts into 1′′(25mm) incremental slots in sides of drawer. Standard in black finish color only.

PSO-6

Stationery Organizer Divider

1′′(25mm)

7 1/4′′(184mm)

1 7/8′′(48mm)

PSOD-6

$23

Features

To Order, Specify:

• • • •

1) Product number. (No finish specification required.)

Includes box of six (6) dividers. Use with stationery organizer. Subdivides stationery organizer into smaller units. Standard in black finish color only.

PSOD-6

Reference Tray

13 1/4′′(337mm)

8 1/2′′(216mm)

PRT-1

$29

Features

To Order, Specify:

• Includes one (1) tray and plexiglass cover. • Suspends from and slides on sides of 3′′(76mm) or 6′′(152mm) drawer. • Standard in black finish color only.

1) Product number. (No finish specification required.)

PRT-1

Side-to-Side 6′′(152mm) Drawer Divider

2 3/4′′(70mm)

12 5/8′′(321mm)

PPDD-6

Features

To Order, Specify:

• • • •

1) Product number. (No finish specification required.)

Includes box of six (6) dividers. Subdivides 6′′(152mm) drawer. Adjustable in 1′′(25mm) increments front-to-back of drawer. Standard in black finish color only.

Note: Part numbers are for pedestals with 3014 and 487 date stamp. Refer to service parts price list for pedestals with date stamp 262. • The date stamp can be found on the underside of the top drawer.

PPDD-6

Pedestal Drawer Lock Conversion Kit

Description

Number

For 18′′(457mm)-high drawer stack (styles A, B, and C) PLLK-18-N For 21′′(533mm)-high drawer stack (styles D, E, and F) PLLK-21-N For 24′′(610mm)-high drawer stack (styles G, H, J, and K) PLLK-24-N

April 2008 / USA

Price

Number

Price

$28 28 28

PLLK-18-R PLLK-21-R PLLK-24-R

$28 28 28

Features

To Order, Specify:

• Includes mounting hardware, lock, and key. • Converts suspended, attached, mobile or freestanding pedestals without locks to lockable style.

1) Product number. (No finish specification required.) Note: -N is for pedestals without reference shelf. -R is for pedestals with reference shelf.

Note: Part numbers are for pedestals with 3014 and 487 date stamps. Refer to eParts price list for pedestals with date stamp 262. • The date stamp can be found on the underside of the top drawer.

356

$22

Class BA – SIN 711-1; Discount Group I Canadian Conversion Factor: Refer to haworth.com/Canada

UniGroup Too Price List

950 Series Personal Storage Tower for use with UniGroup Too, UniGroup, PLACES Number Hinged Door

LTHL (Left-hand shown)

Height

Depth

Width

Pedestal

Shelf

45 1/4′′(1148mm)

23′′(584mm)

24′′(610mm)

62 1/2′′(1588mm)

23′′(584mm)

24′′(610mm)

72 1/2′′(1842mm)

23′′(584mm)

24′′(610mm)

Box/Box/File File/File Box/Box/File File/File File/File/File Box/Box/File File/File File/File/File

1 1 2 2 1 3 3 1

To Order, Specify:

• Hinged Door Module has black, height adjustable shelves in 2 1/4′′(57mm) increments. • Standard with three black locks (one each for the pedestal, valet and hinged door) that are keyed alike. • Valet includes one coat rod. • Drawer interiors and accessories standard in black. • Each file drawer includes one file compressor. • Each box drawer includes one side-to-side divider. • Order pencil tray separately. • Translucent top option adds 2 3/4′′(70mm) to overall height. • Caster option (available only on 45 1/4′′ H.) adds 3′′(76mm) to overall height. Includes two locking swivel and two non-swivel casters. • Ships assembled.

1) Product number, including:

Price $2463 2288 $2591 2412 2705 $2981 2774 3111

1 Valet Orientation: L

Left-hand

R Right-hand

2 Top Option: F

Flat top

T

Translucent top, add $425

2) Specify full Pull option (if desired) by adding X as 11th digit 3) Specify caster option (available only on 45 1/4′′ high units, if desired) by adding a C as 11th or 12th digit, add $196 list 4) Trim color for case, door and drawer fronts. Note: Upcharge (list) for Metallic trim color. LTH -4242 = $196 LTH -5242 = $223 LTH -6242 = $252

Optional casters are available only on 45 1/4′′ H x 24′′ W units.

LTBL (Left-hand shown)

2 -4242-H -4242-J -5242-H -5242-J -5242-M -6242-H -6242-J -6242-M

Features

NOTE:

Side Bookcase

1 LTH LTH LTH LTH LTH LTH LTH LTH

45 1/4′′(1148mm)

23′′(584mm)

24′′(610mm)

62 1/2′′(1588mm)

23′′(584mm)

24′′(610mm)

72 1/2′′(1842mm)

23′′(584mm)

24′′(610mm)

Box/Box/File File/File Box/Box/File File/File Box/Box/File File/File

1 1 2 2 3 3

LTB LTB LTB LTB LTB LTB

-4242-H -4242-J -5242-H -5242-J -6242-H -6242-J

Features

To Order, Specify:

• Bookcase Module has color matched, height adjustable shelves in 2 1/4′′(57mm) increments. • Standard with two black locks (one each for the pedestal and valet) that are keyed-alike. • Valet includes one coat rod. • Drawer interiors and accessories standard in black. • Interior of open bookcase, including shelves, are color matched to exterior of tower. • Each file drawer includes one file compressor. • Each box drawer includes one side-to-side divider. • Order pencil tray separately. • Translucent top option adds 2 3/4′′(70mm) to overall height. • Caster option (available only on 45 1/4′′ H.) adds 3′′(76mm) to overall height. Includes two locking swivel and two non-swivel casters. • Ships assembled.

1) Product number, including:

$2216 2058 $2332 2171 $2682 2497

1 Valet Orientation: L

Left-hand

R Right-hand

2 Top Option: F

Flat top

T

Translucent top, add $425

2) Specify full Pull option (if desired) by adding X as 11th digit 3) Specify caster option (available only on 45 1/4′′ high units, if desired) by adding a C as 11th or 12th digit, add $196 list 4) Trim color for case, door, drawer fronts and adjustable shelves. Note: Upcharge (list) for Metallic trim color. LTB -4242 = $196 LTB -5242 = $223 LTB -6242 = $252

NOTE: Optional casters are available only on 45 1/4′′ H x 24′′ W units.

Class MA – SIN 711-3; Discount Group II Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

357

UniGroup Too Price List

950 Series Personal Storage Tower for use with UniGroup Too, UniGroup, PLACES Number Hinged Door

Height

Depth

Width

Pedestal

Shelf

45 1/4′′(1148mm)

23′′(584mm)

15 1/4′′(387mm)

62 1/2′′(1588mm)

23′′(584mm)

15 1/4′′(387mm)

Box/Box/File File/File Box/Box/File File/File File/File/File

1 1 2 2 1

To Order, Specify:

• Hinged Door Module has black, height adjustable shelves in 2 1/4′′(57mm) increments. • Standard with two black locks (one each for the pedestal and hinged door) that are keyed alike. • Drawer interiors and accessories standard in black. • Each file drawer includes one file compressor. • Each box drawer includes one side-to-side divider. • Order pencil tray separately. • Ships assembled.

1) Product number, including:

45 1/4′′(1148mm)

23′′(584mm)

15 1/4′′(387mm)

April 2008 / USA

1 Orientation: L

Left-hand

R Right-hand 2) Specify full Pull option (if desired) by adding X as 11th digit

62 1/2′′(1588mm)

23′′(584mm)

15 1/4′′(387mm)

Box/Box/File File/File Box/Box/File File/File

1 1 2 2

LTB LTB LTB LTB

-4152-HF -4152-JF -5152-HF -5152-JF

Features

To Order, Specify:

• Bookcase Module has color matched, height adjustable shelves in 2 1/4′′(57mm) increments. • Standard with one black lock (for the pedestal). • Drawer interiors and accessories standard in black. • Interior of open bookcase, including shelves, are color matched to exterior of tower. • Each file drawer includes one file compressor. • Each box drawer includes one side-to-side divider. • Order pencil tray separately. • Ships assembled.

1) Product number, including:

2 3/4′′(70mm)

23′′(584mm)

24′′(610mm)

L

Left-hand

R Right-hand 2) Specify full Pull option (if desired) by adding X as 11th digit 3) Trim color for case, door, drawer fronts and adjustable shelves. Note: Upcharge (list) for Metallic trim color. LTB -4152 = $196 LTB -5152 = $223

LTTT-2424

To Order, Specify:

• Top can be retrofit to existing Personal Storage Towers with flat tops. • Translucent top adds 2 3/4′′(70mm) to overall height. • For use on 24′′(610mm) wide Personal Storage Towers only.

1) Product number.

Class MA – SIN 711-3; Discount Group II Canadian Conversion Factor: Refer to haworth.com/Canada

$1926 1789 $2065 1917

1 Orientation:

Features

LTTT-2424

358

$2141 1988 $2295 2131 2398

3) Trim color for case, door and drawer fronts. Note: Upcharge (list) for Metallic trim color. LTH -4152 = $196 LTH -5152 = $223

LTBL (Left-hand shown)

Translucent Tower Top

-4152-HF -4152-JF -5152-HF -5152-JF -5152-MF

Features

LTHL (Left-hand shown)

Side Bookcase

Price

1 LTH LTH LTH LTH LTH

$451

2) Trim color for top. Note: $28 Upcharge (list) for Metallic trim color.

UniGroup Too Price List

950 Series Lateral Files – Freestanding for use with UniGroup Too, UniGroup, PLACES Number without Counterweight Height Two-High

Depth

Side-to-side hanging bars 26 7/8′′(682mm) 18′′(457mm)

Front-to-back hanging bars 26 7/8′′(682mm) 18′′(457mm)

LFRS-LD0H LFSS-LD0H

Two-High With Counterweight*

Width

Number with Counterweight Price

1

30′′(762mm) 36′′(914mm) 42′′(1067mm)

LF LF LF

S-230-LD0H S-236-LD0H S-242-LD0H

$789 893 969

30′′(762mm) 36′′(914mm) 42′′(1067mm)

LF LF LF

S-230-LD0F S-236-LD0F S-242-LD0F

$818 922 998

Price

1 LF LF LF LF LF LF

S-230-LDCH S-236-LDCH S-242-LDCH S-230-LDCF S-236-LDCF S-242-LDCF

Features

To Order, Specify:

• One counterweight is required per two-high file when not ganged or attached to wall. • Includes one factory-installed counterweight.* • Includes lateral file, label holders with inserts and side-to-side hanging bars (two per drawer); or front-to-back hanging bars (two each per drawer) and one side-to-side bar. • Equipped with two (2) 12′′(305mm) drawers. • Lock plug(s) and key(s) are shipped with random numbering unless they are specified ‘‘keyed-alike’’ or ‘‘master-keyed.’’ • Non-locking option available. • Drawer interiors are black.

1) Product number, including:

Available on RUSH.

$ 894 1008 1113 $ 923 1037 1142

1 Case Edge Detail: R Radius S

Square

2) Case trim color. 3) Drawer front trim color. 4) Specify full pull option (if desired) by adding X as 12th digit. Note: $87 upcharge (list) for Metallic trim color.

Specification Tip LFRS-LDCH LFSS-LDCH

• To specify dividers or compressors in place of side-to-side hanging bars, substitute D for dividers (three per drawer) or C for compressors (one per drawer) in place of the H.

Non-Locking Option Non-locking files require modification of the product number and price. To specify, replace the eighth digit of the product number with an N. Deduct $47 from the list price. Example: LFRS-230-LD0H becomes LFRS-230-ND0H.

Class MA – SIN 711-3; Discount Group II Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

359

UniGroup Too Price List

950 Series Lateral Files – Freestanding for use with UniGroup Too, UniGroup, PLACES Number Three-High

LFRS-LD0H LFSS-LD0H

Height

Depth

Width

Description

38 7/8′′(987mm)

18′′(457mm)

Side-to-side hanging bars

38 7/8′′(987mm)

18′′(457mm)

30′′(762mm) 36′′(914mm) 42′′(1067mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm)

Front-to-back hanging bars

To Order, Specify:

• Includes lateral file, label holders with inserts and side-to-side hanging bars (two per drawer); or front-to-back hanging bars (two each per drawer) and one side-to-side bar. • Equipped with three (3) 12′′(305mm) drawers. • One counterweight is recommended per three- or four-high file when not ganged or attached to wall. • Lock plug(s) and key(s) are shipped with random numbering unless they are specified ‘‘keyed-alike’’ or ‘‘master-keyed.’’ • Non-locking option available. • Drawer interiors are black.

1) Product number, including:

Specification Tip • To specify dividers or compressors in place of side-to-side hanging bars, substitute D for dividers (three per drawer) or C for compressors (one per drawer) in place of the H.

LFRS-LD0H LFSS-LD0H

50 3/4′′(1289mm)

18′′(457mm)

50 3/4′′(1289mm)

18′′(457mm)

30′′(762mm) 36′′(914mm) 42′′(1067mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm)

S

Square

2) Case trim color. 3) Drawer front trim color. 4) Specify full pull option (if desired) by adding X as 12th digit. Note: Upcharge for Metallic trim color. 3-high $114 (list). 4-high $141 (list).

LF LF LF LF LF LF

S-430-LD0H S-436-LD0H S-442-LD0H S-430-LD0F S-436-LD0F S-442-LD0F

Features

To Order, Specify:

• Includes lateral file, label holders with inserts and side-to-side hanging bars (two per drawer); or front-to-back hanging bars (two each per drawer) and one side-to-side bar. • Equipped with four (4) 12′′(305mm) drawers. • One counterweight is recommended per three- or four-high file when not ganged or attached to wall. • Standard with lock. • Lock plug(s) and key(s) are shipped with random numbering unless they are specified ‘‘keyed-alike’’ or ‘‘master-keyed.’’ • Non-locking option available. • Drawer interiors are black.

1) Product number, including:

• To specify dividers or compressors in place of side-to-side hanging bars, substitute D for dividers (three per drawer) or C for compressors (one per drawer) in place of the H.

Non-Locking Option Non-locking files require modification of the product number and price. To specify, replace the eighth digit of the product number with an N. Deduct $47 from the list price. Example: LFRS-330-LD0H becomes LFRS-330-ND0H.

April 2008 / USA

R Radius

Front-to-back hanging bars

Specification Tip

Class MA – SIN 711-3; Discount Group II Canadian Conversion Factor: Refer to haworth.com/Canada

$1028 1167 1321 $1071 1210 1364

1 Case Edge Detail:

Side-to-side hanging bars

Available on RUSH.

360

S-330-LD0H S-336-LD0H S-342-LD0H S-330-LD0F S-336-LD0F S-342-LD0F

Features

Available on RUSH.

Four-High

Price

1 LF LF LF LF LF LF

$1308 1516 1717 $1364 1572 1773

1 Case Edge Detail: R Radius S

Square

2) Case trim color. 3) Drawer front trim color. 4) Specify full pull option (if desired) by adding X as 12th digit. Note: Upcharge for Metallic trim color. 3-high $114 (list). 4-high $141 (list).

UniGroup Too Price List

950 Series Lateral Files – Freestanding for use with UniGroup Too, UniGroup, PLACES Number Five-High

LFRS-LD0H LFSS-LD0H

Height

Depth

Width

Description

62 3/4′′(1594mm)

18′′(457mm)

Side-to-side hanging bars

62 3/4′′(1594mm)

18′′(457mm)

30′′(762mm) 36′′(914mm) 42′′(1067mm) 30′′(762mm) 36′′(914mm) 42′′(1067mm)

Price

1 LF LF LF LF LF LF

Front-to-back hanging bars

S-530-LD0H S-536-LD0H S-542-LD0H S-530-LD0F S-536-LD0F S-542-LD0F

Features

To Order, Specify:

• Includes lateral file, label holders with inserts and side-to-side hanging bars (two per drawer); or front-to-back hanging bars (two each per drawer) and one side-to-side bar. • Equipped with four (4) 12′′(305mm) drawers and one (1) roll-out shelf with receding door in the top position. • One counterweight is recommended per five-high file when not ganged or attached to wall. • Lock plug(s) and key(s) are shipped with random numbering unless they are specified ‘‘keyed-alike’’ or ‘‘master-keyed.’’ • Non-locking option available. • Drawer and shelf interiors are black.

1) Product number, including:

Available on RUSH.

$1570 1806 2052 $1641 1877 2123

1 Case Edge Detail: R Radius S

Square

2) Case trim color. 3) Drawer/receding door front trim color. 4) Specify full pull option (if desired) by adding X as 12th digit. Note: $171 upcharge (list) for Metallic trim color.

Specification Tips • To specify dividers or compressors in place of side-to-side hanging bars, substitute D for dividers (three per drawer) or C for compressors (one per drawer) in place of the H. • 12′′(305mm) roll-out shelf does not accommodate standard binders, see custom file section.

Non-Locking Option Non-locking files require modification of the product number and price. To specify, replace the eighth digit of the product number with an N. Deduct $47 from the list price. Example: LFRS-530-LD0H becomes LFRS-530-ND0H.

Class MA – SIN 711-3; Discount Group II Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

361

UniGroup Too Price List

950 Series Lateral Files – Freestanding, Receding Doors, Roll-Out Shelves for use with UniGroup Too, UniGroup, PLACES Number without Counterweight Height Two-High

Depth

Side-to-side hanging bars 26 7/8′′(682mm) 18′′(457mm)

Front-to-back hanging bars 26 7/8′′(682mm) 18′′(457mm)

LFRS-LR0H LFSS-LR0H

Two-High With Counterweight*

Width

Price

1 LF LF LF

S-230-LR0H S-236-LR0H S-242-LR0H

$789 893 969

LF LF LF

S-230-LRCH S-236-LRCH S-242-LRCH

$ 894 1008 1113

30′′(762mm) 36′′(914mm) 42′′(1067mm)

LF LF LF

S-230-LR0F S-236-LR0F S-242-LR0F

$818 922 998

LF LF LF

S-230-LRCF S-236-LRCF S-242-LRCF

$ 923 1037 1142

Features

To Order, Specify:

• One counterweight is recommended per two-high file when not ganged or attached to wall. • Includes one factory-installed counterweight.* • Includes lateral file, one factory-installed counterweight and label holders with inserts and side-to-side hanging bars (two each per shelf) and one side-to-side bar. • Equipped with two (2) 12′′(305mm) roll-out shelves behind receding doors. • Lock plug(s) and key(s) are shipped with random numbering unless they are specified ‘‘keyed-alike’’ or ‘‘master-keyed.’’ • Non-locking option available. • Shelf interiors are black.

1) Product number, including:

• To specify dividers or compressors in place of side-to-side hanging bars, substitute D for dividers (three per shelf) or C for compressors (one per shelf) in place of the H. • 12′′(305mm) roll-out shelves do not accommodate standard binders, see custom file section.

Non-Locking Option Non-locking files require modification of the product number and price. To specify, replace the eighth digit of the product number with an N. Deduct $47 from the list price. Example: LFRS-230-LRCH becomes LFRS-230-NRCH.

362

April 2008 / USA

Price

1

30′′(762mm) 36′′(914mm) 42′′(1067mm)

Specification Tips LFRS-LRCH LFSS-LRCH

Number with Counterweight

Class MA – SIN 711-3; Discount Group II Canadian Conversion Factor: Refer to haworth.com/Canada

1 Case Edge Detail: R Radius S

Square

2) Case trim color. 3) Drawer/receding door front trim color. 4) Specify full pull option (if desired) by adding X as 12th digit. Note: $84 upcharge (list) for Metallic trim color.

UniGroup Too Price List

950 Series Credenza Lateral File Accessories for use with UniGroup Too, UniGroup, PLACES Top Thickness

Number

Single Top, Wood Surface with 1 3/16′′(30mm) Wood Trim — Radius or Square Edge

Depth

Width

18′′(457mm)

30′′(762mm) 36′′(914mm) 42′′(1067mm)

1 CFT CFT CFT

-1830-W -1836-W -1842-W

Wood Price I

Wood Price II

$435 488 535

$478 532 588

Features

To Order, Specify:

• Wood veneer top with wood edge trim. • Shipped separately for field installation. • Applicable only to 950 Series credenza lateral files purchased after 10/2/89.

1) Product number, including:

1 Edge Detail: R Radius S

Square

2) Wood finish.

CFTR-W CFTS-W

Single Top, Laminate Surface — Radius or Square Edge

Top Thickness

Depth

Width

Number

1 1/4′′(32mm)

18′′(457mm)

30′′(762mm) 36′′(914mm) 42′′(1067mm)

Price

1 CFT CFT CFT

-1830-LT -1836-LT -1842-LT

$247 276 304

Features

To Order, Specify:

• High-pressure laminate surface with a 3mm T-molded edge available on radius edge top, 3mm edgeband available on square edge top. • Shipped separately for field installation. • Applicable only to 950 Series credenza lateral files purchased after 10/2/89.

1) Product number, including:

Available on RUSH.

1 Edge Detail: R Radius S

Square

2) Laminate surface color. 3) Edge trim color.

CFTR-LT CFTS-LT

Class MA – SIN 711-3; Discount Group II Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

363

UniGroup Too Price List

950 Series File Accessories for use with UniGroup Too, UniGroup, PLACES

Compressor

CP

Height

Width

Description

Number

Price

7′′(178mm)

30′′(762mm) 36′′(914mm) 42′′(1067mm)

For drawer or shelf interiors For drawer or shelf interiors For drawer or shelf interiors

CP-30 CP-36 CP-42

$27 28 28

Features

To Order, Specify:

• Includes one (1) compressor and horizontal track. • For use in 9′′(229mm)-, 12′′(305mm)-, and 15′′(381mm)-high drawers and roll-out shelves. • For converting lateral file drawer or shelf from any other filing format to compressor style. • Manually-operated spring clip release for infinite drawer settings. • Standard in black finish color only.

1) Product number. (No color specification required.)

Side-to-Side Hanging Bars

HB

30′′(762mm) 36′′(914mm) 42′′(1067mm)

For drawer or roll-out shelf For drawer or roll-out shelf For drawer or roll-out shelf

HB-30 HB-36 HB-42

Features

To Order, Specify:

• Includes two (2) side-to-side hanging bars. • For converting lateral file drawer or shelf from any other filing format to side-to-side format. • Use in conjunction with separately specified front-to-back hanging bars for front-to-back filing. • Standard in black finish color only.

1) Product number. (No color specification required.)

$45 45 45

Specification Tip • Haworth recommends one (1) separately specified side-to-side hanging bar for each 12′′(305mm) or 15′′(381mm) shelf ordered with dividers. The side-to-side hanging bar functions as a letter- or A4-depth backstop for 3-ring binders or folders.

Dividers

LDV

For 12′′(305mm) or 15′′(381mm) -high drawer or shelf For 9′′(229mm)-high drawer or shelf For 6′′(152mm)-high drawer or shelf For 3′′(76mm)-high drawer or shelf

LDV-06

27

LDV-03

27

To Order, Specify: 1) Product number. (No color specification required.)

• Files manufactured before 6/28/93, order dividers from lateral files eParts.

April 2008 / USA

27

• Includes three (3) dividers dimensioned to utilize the full drawer depth. • For use in files manufactured after 6/28/93. • Dividers may be used with any file width and can be adjusted at 1′′(25mm) increments. • Standard in black finish color only.

Specification Tip

Class MA – SIN 711-3; Discount Group II Canadian Conversion Factor: Refer to haworth.com/Canada

$27

LDV-09

Features

Available on RUSH.

364

LDV-1215

UniGroup Too Price List

950 Series File Accessories for use with UniGroup Too, UniGroup, PLACES

Front-to-Back Hanging Bars

Length

Number

Price

15 3/4′′(400mm)

FTB-15

$25

Features

To Order, Specify:

• Includes two (2) front-to-back bars. • Front-to-back hanging bars may be used with any width file. • Must be used in drawers or roll-out shelf interiors featuring side-to-side hanging bars set at EDP depth. • Standard in black finish color only.

1) Product number. (No color specification required.)

Available on RUSH. FTB-15

Counterweight

CW

Width

Number

Price

30′′(762mm) 36′′(914mm) 42′′(1067mm)

CW-30 CW-36 CW-42

$105 115 144

Features

To Order, Specify:

• One counterweight is required per two-high freestanding file when not ganged or attached to wall. • One counterweight is recommended per three-, four- or five-high file when not ganged or attached to wall. • Shipped separately for field installation. • Designed to mount in the 950 Series Lateral file only.

1) Product number. (No color specification required.)

Available on RUSH.

Lateral File Lockbar

LBA

File Height

Number

Price

Two-High Three-High Four-High Five-High

LBA-2 LBA-3 LBA-4 LBA-5

$184 185 186 187

Features

To Order, Specify:

• Lockbar attaches to the front of lateral file. • Attachment hardware includes two top brackets and one bottom bracket. • One of the top brackets may be mounted on the side of the file case for storing the lockbar during file access. • Lockbar meets requirements established by the U.S. Department of Defense. • Shipped separately for field installation.

1) Product number.

Class MA – SIN 711-3; Discount Group II Canadian Conversion Factor: Refer to haworth.com/Canada

2) Trim color.

April 2008 / USA

365

UniGroup Too Price List

Tables UniGroup

Laminate Square Table

Height

Depth

Width

Number

Price

29′′(737mm)

24′′(610mm) 30′′(762mm) 36′′(914mm)

24′′(610mm) 30′′(762mm) 36′′(914mm)

TPPS-2424 TPPS-3030 TPPS-3636

$497 528 563

Features

To Order, Specify:

• High-pressure laminate top with 3mm T-mold edge. • Pedestal base is available in trim colors. • Self-adjusting glides.

1) Product number. 2) Laminate surface color. 3) Edge trim color.

TPPS

4) Base trim color.

Laminate Round Table

TPPR

29′′(737mm)

30′′(762mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm)

TPPR-30 TPPR-36 TPPR-42 TPPR-48

Features

To Order, Specify:

• High-pressure laminate top with 3mm T-mold edge. • Pedestal base is available in trim colors. • Self-adjusting glides.

1) Product number.

$484 542 602 721

2) Laminate surface color. 3) Edge trim color.

Available on RUSH.

4) Base trim color.

Laminate Rectangular Table

29′′(737mm)

30′′(762mm)

36′′(914mm)

TPCR

54′′(1372mm) 60′′(1524mm) 72′′(1829mm) 72′′(1829mm)

TPCR-3054 TPCR-3060 TPCR-3072 TPCR-3672

Features

To Order, Specify:

• High-pressure laminate top with 3mm T-mold edge. • Bases are available in trim colors. • Self-adjusting glides.

1) Product number.

$780 792 838 926

2) Laminate surface color. 3) Edge trim color. 4) Base trim color.

Laminate Oval Table

29′′(737mm)

30′′(762mm) 36′′(914mm)

TPC0

60′′(1524mm) 72′′(1829mm) 60′′(1524mm) 72′′(1829mm)

TPC0-3060 TPC0-3072 TPC0-3660 TPC0-3672

Features

To Order, Specify:

• High-pressure laminate top with 3mm T-mold edge. • Bases are available in trim colors. • Self-adjusting glides.

1) Product number. 2) Laminate surface color. 3) Edge trim color. 4) Base trim color.

366

April 2008 / USA

Class AA – SIN 711-1; Discount Group X Canadian Conversion Factor: Refer to haworth.com/Canada

$811 876 880 960

UniGroup Too Price List

Tables PLACES

Laminate C-Leg Table

Height

Depth

Width

Number

Price

26′′(660mm)

24′′(610mm)

36′′(914mm) 48′′(1219mm) 60′′(1524mm) 36′′(914mm) 48′′(1219mm) 60′′(1524mm) 36′′(914mm) 48′′(1219mm) 60′′(1524mm) 36′′(914mm) 48′′(1219mm) 60′′(1524mm)

HTCT-2436-T HTCT-2448-T HTCT-2460-T HTCT-3036-T HTCT-3048-T HTCT-3060-T HTCW-2436-T HTCW-2448-T HTCW-2460-T HTCW-3036-T HTCW-3048-T HTCW-3060-T

$ 550 715 747 627 805 861 $ 642 832 868 732 939 1004

30′′(762mm)

HTCT-T HTCW-T

29′′(737mm)

24′′(610mm)

30′′(762mm)

Features

To Order, Specify:

• Two heights, 26′′(660mm) machine height and 29′′(737mm) desk height. • High-pressure laminate top with 3mm T-mold edge. • Base and modesty panel are available in trim colors. • Tables feature 1/4-height modesty panels. • C-Leg design permits free leg swing. • Tables 48′′(1219mm) and wider will accommodate a pencil drawer but not drawer pedestals. • 24′′(610mm) deep tables will not accommodate an adjustable keyboard pad.

1) Product number. 2) Laminate surface color. 3) Edge trim color. 4) Base trim color.

Available on RUSH.

Class BA – SIN 711-1; Discount Group X Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

367

UniGroup Too Price List

Sit-to-Stand Adjustable Height Tables PLACES

Rectangular — Laminate — T-Mold Edge

Height

Depth

Width

Number

Price

27 1/4′′ - 45′′(692mm - 1143mm)

24′′(610mm)

36′′(914mm) 42′′(1067mm) 48′′(1219mm) 60′′(1524mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 60′′(1524mm)

HURS-2436-LA HURS-2442-LA HURS-2448-LA HURS-2460-LA HURS-3036-LA HURS-3042-LA HURS-3048-LA HURS-3060-LA

$2027 2054 2082 2148 $2158 2196 2226 2296

30′′(762mm)

HURS-LA

Features

To Order, Specify:

• High-pressure laminate top with 3mm T-mold edge. • Pre-drilled for base. • Hand crank provides 1′′(25mm) vertical movement for every 6 1/2 turns. • Hand crank is right-handed and retracts under worksurface. • Widths shown in nominal dimensions, actual width reduced 1′′(25mm) on each side and back to accommodate cables and eliminate pinch points. • Chrome glides have 3/8′′(10mm) of height adjustment. • Grommets can be specified separately and field installed. • Ships unassembled.

1) Product number. 2) Laminate surface color. 3) Edge trim color. Note: Base, legs, and support brackets standard in black.

NOTE: Will not accept suspended drawer pedestals.

Corner — Laminate — T-Mold Edge

27 1/4′′(692mm)- 45′′(1143mm)

24′′(610mm)

30′′(762mm)

HUCS-2436-LA

36′′(914mm) 42′′(1067mm) 48′′(1219mm) 48′′(1219mm)

Features

To Order, Specify:

• High-pressure laminate top with 3mm T-mold edge. • Pre-drilled for base. • Hand crank provides 1′′(25mm) vertical movement for every 6 1/2 turns. • Hand crank is right-handed and retracts under worksurface. • Widths shown in nominal dimensions, actual width reduced 1′′(25mm) on each side and back to accommodate cables and eliminate pinch points. • Chrome glides have 3/8′′(10mm) of height adjustment. • Grommets can be specified separately and field installed. • Ships unassembled.

1) Product number.

NOTE: Will not accept suspended drawer pedestals or adjustable keyboard pads. HUCS-2442-LA HUCS-2448-LA HUCS-3048-LA

368

April 2008 / USA

HUCS-2436-LA HUCS-2442-LA HUCS-2448-LA HUCS-3048-LA

Class BA – SIN 711-1; Discount Group X Canadian Conversion Factor: Refer to haworth.com/Canada

$2756 2786 2822 $2896

2) Laminate surface color. 3) Edge trim color. Note: Base, legs, and support brackets standard in black.

UniGroup Too Price List

Sit-to-Stand Adjustable Height Tables PLACES

Curved Corner — Laminate — T-Mold Edge

Height

Depth

Width

Number

Price

27 1/4′′ - 45′′(692mm - 1143mm)

24′′(610mm)

36′′(914mm) 42′′(1067mm) 48′′(1219mm) 48′′(1219mm)

HUCC-2436-LA HUCC-2442-LA HUCC-2448-LA HUCC-3048-LA

$2756 2786 2822 $2896

30′′(762mm)

HUCC-LA

Features

To Order, Specify:

• High-pressure laminate top with 3mm T-mold edge. • Pre-drilled for base and adjustable keyboard pad accessory. • Hand crank provides 1′′(25mm) vertical movement for every 6 1/2 turns. • Hand crank is right-handed and retracts under worksurface. • Widths shown in nominal dimensions, actual width reduced 1′′(25mm) on each side and back to accommodate cables and eliminate pinch points. • Chrome glides have 3/8′′(10mm) of height adjustment. • Grommets can be specified separately and field installed. • Ships unassembled.

1) Product number. 2) Laminate surface color. 3) Edge trim color. Note: Base, legs, and support brackets standard in black.

NOTE: Will not accept suspended drawer pedestals or adjustable keyboard pads.

Split Corner — Laminate — T-Mold Edge

HUCK-2442-LA

29′′ - 45′′(737mm - 1143mm) 27 1/4′′ - 45′′(692mm - 1143mm)

24′′(610mm) 30′′(762mm)

42′′(1067mm) 48′′(1219mm)

HUCK-2442-LA HUCK-3048-LA

Features

To Order, Specify:

• High-pressure laminate top with 3mm T-mold edge. • Pre-drilled for base. • Hand crank provides 1′′(25mm) vertical movement for every 6 1/2 turns. • Top-mounted hand crank is right-handed and removes from worksurface. • Widths shown in nominal dimensions, actual width reduced 1′′(25mm) on each side and back to accommodate cables and eliminate pinch points. • Price includes keyboard surface adjustment mechanism. • Keyboard surface manually adjusts to any position 7′′(178mm) above and 5 3/4′′(146mm) below the back worksurface. • Keyboard surface tilts -5° to +9° with a locking control knob. • Separate keyboard pad not available. • Keyboard surface adjustment mechanism available in charcoal finish color only. • Chrome glides have 3/8′′(10mm) of height adjustment. • Grommets can be specified separately and field installed. • Ships unassembled.

1) Product number.

$3340 3474

2) Laminate surface color. 3) Edge trim color. Note: Base, legs, and support brackets standard in black.

HUCK-3048-LA

Class BA – SIN 711-1; Discount Group X Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

369

UniGroup Too Price List

Sit-to-Stand Fixed Height Tables PLACES

Rectangular — Laminate — T-Mold Edge

Height

Depth

Width

Number

Price

29′′(737mm)

24′′(610mm)

36′′(914mm) 42′′(1067mm) 48′′(1219mm) 60′′(1524mm) 36′′(914mm) 42′′(1067mm) 48′′(1219mm) 60′′(1524mm)

HURS-2436-LF HURS-2442-LF HURS-2448-LF HURS-2460-LF HURS-3036-LF HURS-3042-LF HURS-3048-LF HURS-3060-LF

$1763 1786 1811 1868 $1877 1909 1935 1996

30′′(762mm)

HURS-LF

Features

To Order, Specify:

• • • • •

1) Product number.

High-pressure laminate top with 3mm T-mold edge. Pre-drilled for base. Chrome glides have 3/8′′(10mm) of height adjustment. Grommets can be specified separately and field installed. Ships unassembled.

2) Laminate surface color. 3) Edge trim color. Note: Base, legs, and support brackets standard in black.

NOTE: Will not accept suspended drawer pedestals.

Corner — Laminate — T-Mold Edge

29′′(737mm)

24′′(610mm)

30′′(762mm)

HUCS-2436-LF

36′′(914mm) 42′′(1067mm) 48′′(1219mm) 48′′(1219mm)

Features

To Order, Specify:

• • • • •

1) Product number.

High-pressure laminate top with 3mm T-mold edge. Pre-drilled for base and adjustable keyboard pad accessory. Chrome glides have 3/8′′(10mm) of height adjustment. Grommets can be specified separately and field installed. Ships unassembled.

NOTES: Will not accept suspended drawer pedestals. Corner table sizes 24 ′′(610mm) x 36 ′′(914mm) and 24 ′′(610mm) x 42 ′′(1067mm) will accommodate an adjustable keyboard track length of 17 ′′(432mm) or less.

HUCS-2442-LF HUCS-2448-LF HUCS-3048-LF

370

April 2008 / USA

HUCS-2436-LF HUCS-2442-LF HUCS-2448-LF HUCS-3048-LF

Class BA – SIN 711-1; Discount Group X Canadian Conversion Factor: Refer to haworth.com/Canada

$2397 2422 2453 $2519

2) Laminate surface color. 3) Edge trim color. Note: Base, legs, and support brackets standard in black.

UniGroup Too Price List

Sit-to-Stand Fixed Height Tables PLACES

Curved Corner — Laminate — T-Mold Edge

Height

Depth

Width

Number

Price

29′′(737mm)

24′′(610mm)

36′′(914mm) 42′′(1067mm) 48′′(1219mm) 48′′(1219mm)

HUCC-2436-LF HUCC-2442-LF HUCC-2448-LF HUCC-3048-LF

$2397 2422 2453 $2519

30′′(762mm)

Features

To Order, Specify:

• • • • •

1) Product number.

High-pressure laminate top with 3mm T-mold edge. Pre-drilled for base and adjustable keyboard pad accessory. Chrome glides have 3/8′′(10mm) of height adjustment. Grommets can be specified separately and field installed. Ships unassembled.

HUCC-LF

2) Laminate surface color. 3) Edge trim color. Note: Base, legs, and support brackets standard in black.

NOTES: Will not accept suspended drawer pedestals. Corner table sizes 24 ′′(610mm) x 36 ′′(914mm) and 24 ′′(610mm) x 42 ′′(1067mm) will accommodate an adjustable keyboard track length of 17 ′′(432mm) or less.

Split Corner — Laminate — T-Mold Edge

HUCK-2442-LF

29′′(737mm)

24′′(610mm) 30′′(762mm)

42′′(1067mm) 48′′(1219mm)

HUCK-2442-LF HUCK-3048-LF

Features

To Order, Specify:

• • • •

1) Product number.

• • • • • •

High-pressure laminate top with 3mm T-mold edge. Pre-drilled for base. Price includes keyboard surface adjustment mechanism. Keyboard surface manually adjusts to any position 7′′(178mm) above and 5 3/4′′(146mm) below the back worksurface. Keyboard surface tilts -5° to +9° with a locking control knob. Separate keyboard pad not available. Keyboard adjustment mechanism available in charcoal finish color only. Chrome glides have 3/8′′(10mm) of height adjustment. Grommets can be specified separately and field installed. Ships unassembled.

$2904 3020

2) Laminate surface color. 3) Edge trim color. Note: Base, legs, and support brackets standard in black.

HUCK-3048-LF

Class BA – SIN 711-11; Discount Group X Canadian Conversion Factor: Refer to haworth.com/Canada

April 2008 / USA

371

UniGroup Too Price List

This page intentionally blank

372

April 2008 / USA

UniGroup Too Price List

Finish/Color Legend

Wood Group I

Veneer Cutting Type Variety Technique Double Cut

Select African Woods

Rift Cut

Surface

Matching Technique

Open Pore

N/A

Grain Direction Component Panel Face Face N/A

Vertical

N/A

Wood Group II

Veneer Cutting Type Variety Technique

Surface

Matching Technique

Horizontal

Horizontal

Horizontal

Grain Direction Component Panel Face Face

Finish Name/ Color

Specification Number

Beachwood

WL-RL(1)

Ebony

WJ-RE(1)

Mahogany Satin

VM-A

Melba

WE-RT(1)

Sorrel

WF-RC(1)

Wenge

WC-RW(1)

Finish Name/ Color

Specification Number

Natural

Maple

Half-Round Cut

Open Pore

Book Matched

Vertical

Vertical

Maple

VP-N

Sand on Maple

VP-AD

Natural

Cherry

Plain Sliced

Filled

Book Matched

Vertical

Vertical

Medium Cherry

VC-U

Natural

Walnut

Plain Sliced

Open Pore

Book Matched

Vertical

Vertical

Amber on Cherry

VC-CA1

Classic on Cherry

VC-83

Espresso on Walnut

VR-W15

Retro on Walnut

VR-W31

Naturally Walnut

VR-W12

Cordovan Walnut

VR-W13

Mahogany Satin

VR-W21

Because of the natural properties of wood, variations of grain pattern and finish color can be expected. Haworth carefully selects each material used in the manufacturing of products to ensure consistent and acceptable color and finish. Wood also will change color due to lighting conditions. Haworth controls this by using surface finishes to reduce color change. However, color change may be more evident in light-colored finishes. Glazing Colors SK-1C SK-1M SK-1E

Clear Bronze Tint Frosted

Glass Patterns(2) SQ-CM SQ-ER SQ-VM

Checks Mix English Reeded Vertical Moire

X Series Pulls Ellipse - Non-Metallic trim colors only Radius - Metallic trim colors only (1)

Available on Adaptable Components only.

(2)

Available on Add-on Panels only. Available on RUSH.

April 2008 / USA

373

UniGroup Too Price List

Finish/Color Legend

UniGroup Too Panels, Components

UniGroup/ PLACES Panels, Components

UniGroup Too/ UniGroup Laminate Panels

Doors

Clerestory Kits

Worksurfaces, Support Panels

T-Mold

Edgeband

Solid Colors Beige TR-R Chalk TR-AK Charcoal TR-K Graphite TR-J Gray Tone TR-G Linen Platinum Putty TR-AA Shadow (Charcoal) Smoke TR-E White Sand Metallic Colors1 Metallic Champagne TR-MC Metallic Gunmetal TR-MG Metallic Silver TR-LE Laminate Wood Grain Colors Light Oak Maple Medium Cherry Medium Oak Laminate Patterned Colors Barley Grain Eagle Nest Finch Nest Grey Spex Hops Grain Oats Grain Owl Nest Quail Nest Rhea Nest Rice Grain Robin Nest Rye Grain Wheat Grain White Spex Translucent - Jump Stuff Ice (Blue) Frost (White) Moon (Amber) Shadow (Charcoal) Translucent Basic White Translucent Patterned Blue Caramel Lime Oyster White Lock Plugs Black Chrome

TR-R TR-AK TR-K TR-J TR-G

TR-AA TR-E

Available on RUSH. Check product pages for availability and upcharges. 2 Upcharge for Group II. 1

374

April 2008 / USA

H-34 H-AK H-8J H-3J H-62 H-WL H-3P H-AA

H-34 H-AK H-8J H-3J H-62

TR-R TR-AK TR-K TR-J TR-G

H-AA

TR-AA

H-3E H-LC

H-3E

TR-E

H-33

H-8K

H-34 H-AK H-8J H-3J H-62 H-WL H-3P H-AA

HP-34 HP-AK HP-8J HP-3J HP-62 HP-WL HP-3P HP-AA

HP-34 HP-AK HP-8J HP-3J HP-62 HP-WL HP-3P HP-AA

H-3E H-LC

HP-3E HP-LC

HP-3E HP-LC

H-33 H-AE H-AD H-8K H-DH H-EJ H-EL H-22 H-DD H-DA H-EK H-EC H-ED H-DC H-EA H-DF H-DE H-21

HP-AE HP-AD

UniGroup Too Price List

Finish/Color Legend

Cascade

Adaptable Component Overhead Storage

UniGroup Shelf Ends

UniGroup Flipper Doors

PLACES Flipper Doors

X Series

V Series

Jump Stuff

Solid Colors Beige HP-34 Chalk HP-AK Charcoal HP-8J Graphite HP-3J Gray Tone HP-62 Linen HP-WL Platinum HP-3P Putty HP-AA Shadow (Charcoal) HP-LU2 Smoke HP-3E White Sand HP-LC Metallic Colors1 Metallic Champagne Metallic Gunmetal Metallic Silver Laminate Wood Grain Colors Light Oak Maple Medium Cherry Medium Oak Laminate Patterned Colors Barley Grain Eagle Nest Finch Nest Grey Spex Hops Grain Oats Grain Owl Nest Quail Nest Rhea Nest Rice Grain Robin Nest Rye Grain Wheat Grain White Spex Translucent - Jump Stuff Ice (Blue) Frost (White) Moon (Amber) Shadow (Charcoal) Translucent Basic White Translucent Patterned Blue Caramel Lime Oyster White Lock Plugs Black Chrome

TR-R TR-AK TR-K TR-J TR-G

V-34 V-AK V-8J V-3J V-8L

H-34 H-AK H-8J H-3J H-62

TR-R TR-AK TR-K TR-J TR-G

TR-R TR-AK TR-K TR-J TR-G

TR-R TR-AK TR-K TR-J TR-G

TR-AA

V-AA

H-AA

TR-AA

TR-AA

TR-AA

H-3E

V-3E

H-3E

TR-E

TR-E

TR-E

TR-MC TR-MG TR-LE

TR-MC TR-MG TR-LE

TR-MC TR-MG TR-LE H-33 H-AE H-AD H-8K

H-AE H-AD H-8K

H-DH H-EJ H-EL H-22 H-DD H-DA H-EK H-EC H-ED H-DC H-EA H-DF H-DE H-21

H-DH H-EJ H-EL H-22 H-DD H-DA H-EK H-EC H-ED H-DC H-EA H-DF H-DE H-21

TR-MC TR-MG TR-LE

TR-LX TR-LQ TR-LY TR-LU P8-AW

P8-AW

P8-PB P8-PA P8-PL P8-PY P8-PW

P8-PB P8-PA P8-PL P8-PY P8-PW

LR-BL LR-BP

LR-BL LR-BP

LR-BL LR-BP

Available on RUSH. Check product pages for availability and upcharges. 2 Upcharge for Group II. 1

April 2008 / USA

375

UniGroup Too Price List

Systems Fabrics/Color Legend

• Fabrics listed on this page apply to all UniGroup Too, UniGroup and PLACES upholstered products. Exceptions will be noted on the price chart pages. (1) Fabric/colorway not available on basic monolithic fabric surface panels. (2) Shimmer is available only on UniGroup Too Inserts, tackboards, or tack strips. (3) Tellure is available only on tackboards or tack strips. Fabric/colorway available on RUSH. † Fabric pattern available on Start It Up at standard lead time. Fabric Grade: A d IOWA (1410-1328) † 100% Recycled Polyester FZ-10 Badger FZ-6 Bixby FZ-3 Bobwhite FZ-2 Cedar Rock FZ-11 Clear Lake FZ-13 Emerson FZ-7 Gar FZ-9 Honeycreek FZ-1 Manawa FZ-5 Rice Lake FZ-4 Trappers Bay FZ-12 Walnut Woods FZ-8 Wapello Fabric Grade: A d OHIO (1410-1329) 100% Recycled Polyester FQ-11 Blue Rock FQ-5 Crane Creek FQ-1 Dillon FQ-6 Erie FQ-9 Garfield FQ-4 Geneva FQ-2 Liberty FQ-7 Magee Marsh FQ-12 Maumee FQ-3 O.H. Ten FQ-10 Quail FQ-8 Sycamore Fabric Grade: A POINT (4322-6312) 100% Virgin Polyester EE-0AG Compass EE-0AC Decimal EE-0AF Focal EE-0AD Nib EE-0AA Peak EE-0AE Vertex Fabric Grade: A d SAVOY (4320-6501) † 100% Polyester FJ-CC Apache FJ-AD Balsam FJ-AP Bisque FJ-AE Blue Ridge FJ-AA Blue Willow FJ-CA Breaker FJ-AR Chamois FJ-AK Elephant FJ-AL Glacier FJ-AX Mango FJ-AY Maya FJ-AW Poplar FJ-CD Raisen FJ-AT Shallot FJ-AM Stainless FJ-AF Tempest

376

April 2008 / USA

Fabric Grade: A d STRIAE (4321-9315) † 100% Recycled Polyester Terratex® C1-AJ Beam C1-AM Band C1-AH Element C1-AF Fillet C1-AC Moonlight C1-AE Ray C1-AK Ribbons C1-AD Straws C1-AA Stream C1-AL Trace Fabric Grade: A d TACCATA (4320-6601) 100% Polyester FL-AK Alpaca FL-AD Confederate FL-AH Dill(1) FL-AE Gherkin(1) FL-AP Harmonic FL-AM Mercury FL-AA Montego (1) FL-AF Morning Glory FL-AR Opus FL-AJ Sepia FL-AL Smokewood FL-AN Stone Mountain FL-AT Timbre Fabric Grade: A d TATAMI(1) (1410-1325) † 100% Polyester W5-1 Agave W5-2 Coir W5-3 Geta W5-4 Hemp W5-5 Jute W5-6 Kayar W5-7 Kobe W5-8 Saffron W5-9 Sapporo W5-10 Sisal W5-12 Tabi W5-11 Tesori

• To obtain fabric samples contact your authorized Haworth dealer. • Fabric part numbers shown in parenthesis can be used to order fabric only. • All fabrics except Tellure are 66′′ wide. Tellure is 54′′ wide. d = Directional fabric n = Non-directional fabric

Fabric Grade: A n TELLURE(3) (4320-1315) † 100% Polyester 3A-18 Black 3A-29 Brick 3A-20 Burgundy 3A-11 Cactus 3A-14 Copperwood 3A-28 Dynamo 3A-22 Galaxy 3A-09 Gray 3A-10 Green Moss 3A-21 Imperial 3A-23 Jodhpurs 3A-16 Lake 3A-25 Napa 3A-19 Navy 3A-06 Nickel 3A-04 Plum 3A-17 Prussian 3A-02 Salmon 3A-15 Sandstone 3A-24 Sheik 3A-27 Sweet Pea 3A-05 Teal 3A-26 Zen Fabric Grade: A ZIG ZAG (4322-6703) 100% Virgin Polyester EF-0AA Chevron EF-0AD Corkscrew EF-0AC Ric Rac EF-0AE Serpentine EF-0AF Wiggle Fabric Grade: B n BASKETWEAVE (1410-1000) † 100% Recycled Polyester F-6K Baby Blue F-7M Birch F-7J Buff F-AL Feather Blue F-AJ Feather Gray F-6J French Blue F-2E Ivory F-EA Natural F-ED Orchid F-EC Oyster F-AF Parchment F-AH Soft Lavender F-JX Sterling F-EH Verdigris

Fabric Grade: B d BISCOTTI (4320-6701) † 60% Polyester, 40% Olefin FN-AJ Atlantis FN-AE Copper FN-AW Curry FN-AT Fig FN-AL Fresco FN-AX Icing FN-AR Macaroon FN-AF Maize FN-AG Opal Gray FN-AD Pesto FN-AC Phoenician FN-AH Sea Spray FN-AA Shark FN-AN Silver Ash FN-AP Torte FN-AM Wafer Fabric Grade: B d KIO (4321-9313) † 100% Recycled Polyester Terratex® ZR-6 Bennett ZR-8 Cascade ZR-7 Crew ZR-5 FUD ZR-3 Jeanlin ZR-1 Jib ZR-11 Reeds Lake ZR-13 Regatta ZR-10 Sailor ZR-2 Sentra ZR-12 Smurf ZR-9 TSJ ZR-4 Yippi Kio Fabric Grade: B d LANDSCAPE (4321-9316) † 100% Recycled Polyester Terratex® C2-AD Estate C2-AH Harvest C2-AJ Panorama C2-AF Parkland C2-AC Photograph C2-AE Seascape C2-AA Vista Fabric Grade: B SENZA (4322-5901) 100% Eco Intelligent Polyester MBDC Technical Nutrient R9-0AA Bare R9-0AM Barefoot R9-0AK Calm R9-0AE Casual R9-0AN Dare R9-0AL Flirt R9-0AF Natural R9-0AG Surprise R9-0AH Whisper

UniGroup Too Price List

Systems Fabrics/Color Legend

Fabric Grade: B d SHIMMER(2) (4321-9309) † 100% Recycled Polyester WS-5 Cellophane WS-8 Copper WS-13 Dew WS-14 Diamond WS-9 Flaxen WS-4 Gems WS-11 Glass WS-1 Glitter WS-10 Mirage WS-16 Mirror WS-2 Moonlight WS-6 Puddle WS-15 Reflection WS-12 Stars WS-3 Water WS-7 Wet Grass Fabric Grade: B d TRAFFIC (4321-9310) 100% Recycled Polyester WZ-9 Autobon WZ-6 Country Drive WZ-7 Freeway WZ-5 Gridlock WZ-1 Jam WZ-3 Merge WZ-8 Route 66 WZ-4 Ticket WZ-2 Yield Fabric Grade: B d TRAX (4321-9312) 100% Recycled Polyester W9-8 Back W9-5 Cover Your W9-2 Eight W9-4 Field W9-6 Railroad W9-1 Sand W9-7 Tire W9-3 Trolley Fabric Grade: B d VERONA (4320-8801) † 86% Polyester, 14% Olefin SF-AL Argento SF-AP Ciao SF-AM Ferra SF-AJ Gesso SF-AA Lido SF-AR Luna SF-AC Mezzo SF-AN Piazza SF-AW Puzzo SF-AT Roma SF-AK Strada SF-AE Tosta

Fabric Grade: B d VINES(1) (1410-1331) † 100% Recycled Polyester FX-10 Arbor FX-8 Clematis FX-11 Dewberry FX-12 Grape FX-2 Greenbrier FX-5 Honeysuckle FX-1 Hop FX-7 Jasmine FX-3 Liana FX-9 Pergola FX-6 Trumpet Creeper FX-4 Wey Fabric Grade: C d GLIMMER (4322-7004) 100% Polyester 2C-008 Acknowledge 2C-003 Allude 2C-002 Murmur 2C-007 Omen 2C-006 Reply 2C-004 Tidal 2C-005 Vibe 2C-001 Winter Fabric Grade: C d MAYPOLE (4322-7007) 100% Polyester 2D-004 Reed 2D-003 Rush 2D-006 Sway 2D-001 Tone 2D-005 Twirl 2D-002 Waver Fabric Grade: C d MIRAGE (4321-9317) 100% Recycled Polyester C3-AF Aura C3-AE Dream C3-AC Ghost C3-AK Illusion C3-AJ Oasis C3-AH Pool C3-AD Reflection C3-AA Visage

Fabric Grade: C d POTTER (4321-9311) 100% Recycled Polyester W8-9 Clay W8-3 Coilpot W8-4 Earthenware W8-8 Glaze W8-10 Kick Wheel W8-6 Kiln W8-5 Slip W8-2 Sponge W8-1 Stoneware W8-7 Vessel Fabric Grade: C d PRING (4321-9318) 100% Recycled Polyester Terratex C5-AL Dew Drops C5-AC Dribble C5-AF Drizzle C5-AD Droplets C5-AJ Fling C5-AH Mist C5-AK Pour C5-AE Spill C5-AM Splatter C5-AA Spray C5-AN Sprinkle Fabric Grade: D d CIRQUE (4321-9319) 100% Recycled Polyester Terratex® C7-AD Cordon C7-AJ Crown C7-AF Equator C7-AE Globe C7-AK Halo C7-AH LP C7-AL Orbit C7-AM Ringlet C7-AC Tire C7-AA Wreath Fabric Grade: D d FURROW (4321-9320) 100% Recycled Polyester Terratex® C6-AD Canal C6-AM Channel C6-AA Corrugation C6-AE Ditch C6-AL Flute C6-AJ Groove C6-AN Gully C6-AF Pleat C6-AC Ridge C6-AH Rut C6-AK Trench

Haworth+ For information on the Haworth+ alliance program, including images and product availability, please refer to: Haworth.com > Surface Collection > Haworth+ Library

ALERT: These materials are current, however they are being considered for future obsolescence due to low volume. Fabric Grade: B d KAVALLA (4320-8701) † 81% Polyester, 19% Olefin SE-AP Bella SE-AA Carrara SE-AL Grotto SE-AN Kava SE-AE Latte SE-AJ Nuvolo SE-AM Tempestra SE-AC Travertine SE-AK Trisco d Fabric Grade: C SCARPA (1410-1323) 100% Polyester S5-AC Ceramic S5-AE Losa S5-AK Mattonella S5-AJ Pavestone S5-AH Pottery S5-AA Slip S5-AF Tegolo S5-AD Tessalate

Fabric Grade: C d SILK TWEED (4320-1301) † 96% Polyester, 4% Silk FS-MH Ashen FS-MY Canvas FS-MC Delft FS-MT Fawn FS-MF Flax FS-MV Gryphon FS-MA Ivy FS-MM Meadow FS-ML Oatmeal FS-MN Pale Juniper FS-MJ Pepper FS-MD Plum Fabric Grade: C d WHORL (1410-1321) † 100% Polyester S9-AF Cirque S9-AM Collapsak S9-AC Filigree S9-AL Mirage S9-AA Nymph S9-AP Orbit S9-AK Pool S9-AE Radii S9-AH Raindrops S9-AN Rip Tide S9-AJ Shimmer S9-AD Volute

Customer’s Own Material (COM) For general Customer’s Own Material (COM) information including processes and forms, please refer to: Haworth.com > Surface Collection > Resources > COM For information on approved COM’s, please refer to: Haworth.com > Surface Collection > COM Library

April 2008 / USA

377

UniGroup Too Price List

Seating Fabrics/Color Legend

• The following fabrics are available on the X Series Pedestal Cushion Kit and 1-high Bench. Fabric Grade: A ESOTERIA 56% Nylon, 44% Polyester 3H-17 Amulet 3H-14 Antares 3H-16 Borealis 3H-06 Celestial 3H-01 Cryptic 3H-22 Draco 3H-15 Enigma 3H-02 Estuary 3H-09 Ethereal 3H-21 Mantra 3H-11 Scirroco 3H-19 Shiva 3H-18 Tarot 3H-20 Vedic 3H-05 Visage Fabric Grade: A GAUGE 100% Recycled Polyester 1X-005 Depth 1X-004 Gas 1X-011 Narrow 1X-008 Pressure 1X-002 Rain 1X-012 Sea 1X-013 Standard 1X-010 Test 1X-003 Time 1X-009 Water 1X-006 Weather 1X-001 Wind 1X-007 Wire Fabric Grade: A d HORIZON 60% Acrylic, 40% Polyester 1N-001 Beeline 1N-004 Birdseye 1N-003 Border 1N-002 Compass 1N-005 Panorama 1N-008 Skyline 1N-006 Sweep 1N-007 Vista Fabric Grade: A d ICON 66% Acrylic, 34% Recycled Polyester IC-7 Argon IC-6 Carbon IC-1 Chlorine IC-5 Cobalt IC-2 Copper IC-12 Fluorine IC-3 Helium IC-13 Iodine IC-10 Mercury IC-9 Phosphorous IC-8 Sulfur IC-11 Wolfram IC-4 Zinc

378

April 2008 / USA

Fabric Grade: A INTERVAL 56% Nylon 44% Polyester 3F-03 Adrian 3F-08 Bayou 3F-17 Binary 3F-06 Carnelian 3F-16 Charm 3F-12 Chimera 3F-18 Echo 3F-14 Flaxen 3F-01 Mink 3F-13 Nutra 3F-02 Polaris 3F-19 Realis 3F-15 Tarium Fabric Grade: A d MOODRING 100% Recycled Polyester NQ-2 Blue Moon NQ-4 Calm NQ-3 Cool NQ-7 Easy NQ-9 Envy NQ-8 Joy NQ-10 Liberate NQ-5 Magic NQ-12 Mello NQ-6 Terrestrial NQ-11 Tranquil NQ-1 Tripp Fabric Grade: A RAVENNA 56% Nylon, 44% Polyester 3E-15 Aqua Marine 3E-02 Azurite 3E-17 Basalt 3E-19 Jade 3E-18 Lode 3E-01 Marquetry 3E-04 Melange 3E-12 Omnium 3E-14 Oolite 3E-05 Pastiche 3E-07 Pietra 3E-16 Sinter 3E-08 Tesserae Fabric Grade: A d SQUARZ 60% Recycled Polyester, 40% Rayon 1R-003 Boxy 1R-005 Checkers 1R-006 Chess 1R-010 Cinder Blocks 1R-002 Hopscotch 1R-009 Ice Cube 1R-007 Square Dance 1R-008 Square Pants 1R-004 T-Square 1R-001 What A Square

Fabric Grade: A WICKER 100% Polyester 1Y-006 Balloon 1Y-001 Bushel 1Y-005 Corf 1Y-003 Gondola 1Y-007 Hive 1Y-004 Oxford 1Y-002 Wisket

d

Fabric Grade: A TELLURE 100% Polyester 3A-18 Black 3A-29 Brick 3A-20 Burgundy 3A-11 Cactus 3A-14 Copperwood 3A-28 Dynamo 3A-22 Galaxy 3A-09 Gray 3A-10 Green Moss 3A-21 Imperial 3A-23 Jodhpurs 3A-16 Lake 3A-25 Napa 3A-19 Navy 3A-06 Nickel 3A-04 Plum 3A-17 Prussian 3A-02 Salmon 3A-15 Sandstone 3A-24 Sheik 3A-27 Sweet Pea 3A-05 Teal 3A-26 Zen Fabric Grade: A d ZINGER 70% Polyester, 30% Acrylic NI-2 BBQ NI-17 Beluga NI-10 Blue Gill NI-8 Chips NI-11 Classic NI-16 Concord NI-13 Frog NI-15 Glade NI-9 Grain NI-12 Granny NI-4 Gravel NI-18 Kiwi NI-20 Mulberry NI-3 Onion NI-6 Pacific NI-1 Roan NI-21 Tar NI-7 Wagon NI-19 Wicker NI-5 Wolf

Fabric Grade: B ARBOREA 55% Cotton, 45% Polyester TA-704 Amaretto TA-710 Aubergine TA-709 Bleu Marine TA-702 Champagne TA-706 Emeraude TA-701 French Lace TA-705 Praline TA-708 Riviera TA-700 Rouge TA-707 Sarcelle TA-703 Silver Pine Fabric Grade: B d COCKTAIL 100% Eco Intelligent Polyester MBDC Technical Nutrient 1W-012 Black Car 1W-008 Blue Moon 1W-013 Boilermaker 1W-001 Bubbly 1W-003 Gibson 1W-004 Grasshopper 1W-007 Lounge 1W-016 Margarita 1W-010 Martini 1W-014 Mojito 1W-011 Old Fashion 1W-006 Pink Squirrel 1W-015 Sidecar 1W-009 Stinger 1W-002 Stout 1W-005 Swizzle Fabric Grade: B d HERRINGBONE 85% Nylon, 15% Polyester TZ-2 Beef Stew TZ-16 Beet TZ-6 Cinder TZ-7 Gator TZ-8 Crock TZ-10 Dandelion TZ-12 Field Lily TZ-5 Freighter TZ-13 Habanero TZ-4 Haze TZ-15 Pansy TZ-9 Peek a Blue TZ-1 Prairie TZ-11 Ray TZ-14 Seal TZ-3 Water

UniGroup Too Price List

Seating Fabrics/Color Legend

Fabric Grade: B d LINE UP 100% Recycled Polyester LU-8 10 Hut LU-2 First String LU-10 Fall In LU-3 In A Row LU-4 Line Drive LU-1 Police LU-6 Rockets LU-7 Single File LU-9 Stars LU-5 Traffic Fabric Grade: B SLINKEE 100% Recycled Polyester Terratex 1M-003 Boing 1M-001 Coil 1M-010 Corkscrew 1M-005 Fiddlehead 1M-009 Helix 1M-004 Rotini 1M-012 Spiral 1M-002 Spring 1M-008 Swirl 1M-006 Tendril 1M-007 Twister 1M-013 Vortex 1M-011 Whirlpool Fabric Grade: C CASHMERE VINYL 100% Polyvinyl Chloride XH-001 Acorn XH-002 Chestnut XH-003 Clay XH-005 Fennel XH-007 Heather XH-008 Ocean XH-009 Olive XH-010 Pool XH-011 Raspberry XH-012 Straw XH-014 Wine XH-015 Yacht

Fabric Grade: C d KARAKUL 100% Recycled Polyester 1P-008 Coil 1P-007 Curl 1P-004 French Knots 1P-005 Kink 1P-001 Knobby 1P-002 Loopy 1P-009 Poodle 1P-006 Terry 1P-003 Wooly Fabric Grade: C MAX VINYL 100% Polyvinyl Chloride XD-007 Appletini XD-005 Champagne XD-001 Coquito XD-010 Fizz XD-006 Limeade XD-002 Malt XD-013 Margarita XD-009 Mimosa XD-016 Razzputin XD-003 Rum XD-015 Sangria XD-011 Tonic Fabric Grade: D d WUHL 100% Wool MBDC Biological Nutrient 1T-016 Black 1T-001 Buckskin 1T-002 Chaps 1T-015 Charcoal Flannel 1T-010 Fern 1T-007 Geranium 1T-014 Grey Flannel 1T-011 Hyacinth 1T-005 Maize 1T-012 Marine 1T-003 Mesquite 1T-008 Peony 1T-004 Rainforest 1T-009 Reef 1T-006 Squash 1T-013 Walnut

Haworth+ For information on the Haworth+ alliance program, including images and product availability, please refer to: Haworth.com > Surface Collection > Haworth+ Library

Customer’s Own Material (COM) For general Customer’s Own Material (COM) information including processes and forms, please refer to: Haworth.com > Surface Collection > Resources > COM For information on approved COM’s, please refer to: Haworth.com > Surface Collection > COM Library

April 2008 / USA

379

UniGroup Too Price List

North American Terms of Sale

These Terms of Sale are part of a quotation, bid response, or other sales document issued by Haworth, Inc., Haworth, Ltd. (‘‘Haworth’’). These Terms of Sale do not cover products manufactured in North America shipping to non-North American countries nor do they cover products manufactured in non-North American countries shipping to North America. For those terms of sale, please contact Haworth’s Global Trade and Compliance Department at 616.393.3000 or through Haworth.com.

A. Ordering Information Haworth sells its products on the terms set forth in these standard Terms of Sale: ORDERS MUST BE SUBMITTED IN WRITING OR ELECTRONICALLY (OrderLine) AS REPRESENTED BY A VALID PURCHASE ORDER, WHICH INCLUDES PRODUCT TOTAL. An order is not binding upon Haworth until Haworth issues an order acknowledgment to the customer (the ‘‘Customer’’), which will include price information and an anticipated shipping date. 1. Order Changes/Cancellations For Specials, Customer’s Own Material (C.O.M.), finish matches, custom colors, custom products and RUSH orders, no changes or cancellations are allowed. All other products require approval for changes or cancellations. A change/cancellation fee will apply. Contact Order Services for applicable charges. Ship-to addresses changed within five (5) business days of shipment will incur fees to cover administrative costs due to re-labeling of product and/or reconsignment fees with the carrier. Order cancellations are complete annulments of orders. Order changes are the deletion of line items or a change in size, color, quantity, ship-to address, or scope of work. There is no penalty for additions; however, any change may cause the order or the line items affected to be rescheduled. Order changes involving additional product and services which increase the value must be accompanied by an amended Purchase Order or other document as agreed. ALL CHANGES MUST BE IN WRITING, REGARDLESS OF THE (DOLLAR) VALUE. CHANGES ARE NOT BINDING UPON HAWORTH UNTIL HAWORTH ISSUES AN ACKNOWLEDGMENT OF THE CHANGE. 2. C.O.M. (Customer’s Own Material) A Customer who requests a fabric, surface or finish material (C.O.M.) not in Haworth’s standard finish offering must first confirm approval of or request new approval for the C.O.M.

380

April 2008 / USA

Haworth will determine feasibility of the material for manufacturability. For a description of the procedure to submit C.O.M. samples, contact Haworth’s Order Services department. For testing information, see the C.O.M. section of the catalog, or call Haworth Order Services. If Haworth agrees to use the C.O.M., (1) Haworth shall have no responsibility for the condition, quality, value, performance, physical properties, or any other aspect of the C.O.M.; and (2) Haworth shall have no liability for any damages, injuries, or losses to the Customer or to any third party that shall be caused by any C.O.M., and the Customer shall hold Haworth harmless for all such liability. 3. Valid/Complete Purchase Order The following information is required in order to process an order with Haworth: a. Customer Information i. Sold To: Legal name, complete address (if Haworth is to bill the end user, provide end user Purchase Order made out to Haworth, Inc., Haworth, Ltd.) and phone and fax number. ii.

Ship To: Legal name and address.

iii. Purchase Order Number: From the party Haworth will be billing. iv. Authorized Signature: All Purchase Orders must be signed by a duly authorized representative if a signature line is present. Electronically transmitted Purchase Orders will be accepted without a signature if dealer billed and the dealer has an electronic purchase payment agreement on file. v.

Contact Name and Phone Number: Person Haworth should contact with any questions regarding the order.

vi. Shipping Contact: Name and phone number of person to be contacted regarding shipping and delivery matters. vii. Tagging Instructions: This information will appear on all documentation received from Haworth including: cartons, acknowledgments, and invoices. Normally 1 tag is allowed per $8,000. viii. Price Agreement or National Sales Agreement Number ix. Product Total: Net dollars. x.

Installation, Design, Project Management, and/or Service Fees

b. Product Information i. Quantity ii.

Product Numbers

iii. Colors iv. Specials: Specify Inquiry and line number for new special products.

v.

Customer’s Own Material: Order entry code, manufacturer, pattern, color, and who is ordering the C.O.M. fabric (Haworth, dealer or the Customer).

vi.

Approval Drawings: An authorized signature by a duly authorized representative is required for shop drawings when applicable.

vii. A deposit may be required for custom materials. c. Order Confirmation All orders will be acknowledged.

B. Pricing Policies 1. Terms of Payment Terms of payment and credit limits will be established based on financial information. Standard payment terms on open credit are net thirty (30) days from invoice date. Advance payments or other payment security may be required by Haworth. The account balance must be at or below the credit limit and current at all times (no past-due balances). Haworth reserves the right to delay or cancel any shipment to a Customer whose Haworth account balance is over the credit limit and/or past due. For walls and floors a deposit will be required. 2. Terms of Credit Customer hereby authorizes Haworth to obtain such credit reports, financial information or other information as Haworth may request, including, without limitation, credit information from any financial institutions or others having a business relationship with the Customer. Customer hereby authorizes any credit references to answer Haworth’s inquiries and provide such credit information and documentation as Haworth may request. The Customer hereby releases and holds Haworth harmless for any inconvenience whatsoever, caused by any temporary or permanent withdrawal or restriction of credit privileges hereunder, or the enforcement of any of the provisions contained in this paragraph. 3. Past-Due Charges Past-due balances will be increased by a maximum of 1.5% per month, or 18% annually, without forfeit of Haworth’s right to immediate payment. 4. Applicable Prices Prices and discounts are subject to change without notice or approval. In the event of an adjustment to pricing, National Sales Agreement (NSA) Customers will be notified in advance according to the terms of the NSA. Applicable prices are those in effect at the time of the RECEIPT of an order; Haworth reserves the right to use the published pricing effective at the time of shipment, if the requested shipping date is more than 120 days after the order receipt date.

UniGroup Too Price List

North American Terms of Sale

The price of any product sold to Customer by Haworth will be based upon the price for the products as follows:

Destination

Price List (‘‘Catalog’’)

U.S.A.

U.S.A.

Canada

Canadian

Mexico

U.S.A.

5. Taxes a. U.S.A.: Haworth prices do not include any sales, use or similar taxes. The Customer is responsible to remit directly to Haworth all such taxes when invoiced. b. Canada: Prices listed in the Canadian catalogs include applicable customs duty. Prices do not include the Federal Goods and Services Tax or any provincial or other sales taxes. Any federal, provincial or other taxes or assessments based upon the sale or shipment of products or services sold applicable to the Customer at present or later imposed by federal, provincial or municipal agencies, shall be added and paid by the Customer. c. Mexico: Prices listed in the U.S.A. catalogs do not include customs duty, value added or any other tax with respect to the sale, use, ownership, or value of any product or service provided by Haworth. Customer is responsible for all such taxes. NOTE: For all countries a valid sales tax exemption certificate must be approved by and on file with Haworth prior to product shipment. Otherwise, sales tax will be due and payable to Haworth when such tax is invoiced to Customer. 6. Services If, as a result of Customer request, the Haworth dealer or Haworth subsidiary provides planning/ design services, storage, project management, special handling, set-up, installation and/or other services, the Customer will be charged at the local Haworth dealer/subsidiary’s prevailing rates. 7. Termination by Haworth Haworth may immediately terminate an order upon written notice in the event bankruptcy or insolvency proceedings are instituted by or against the Customer, or the Customer is adjudicated as bankrupt, becomes insolvent, makes an assignment for the benefit of creditors, or proposes or makes any arrangements for the liquidation of its debts, or a receiver or receiver and manager is appointed with respect to all or any part of the assets of the Customer.

C. Shipping and Delivery Haworth will have the right to determine the method of shipment and routing of product. This section does not apply to Haworth’s TecCrete or TecFlor products. TecCrete and TecFlor are sold freight collect.

If, for any reason, a delivery has to be made to an intermediate location (i.e. a location other than the ‘‘Ship To’’ location noted on the order or ultimate end user location), all handling and re-delivery costs incurred would be at the Customer’s expense. 1. U.S.A. - Contiguous All deliveries will be F.O.B. (U.C.C./2-319) Haworth’s manufacturing facilities or distribution centers. Freight charges will be prepaid by Haworth on all orders to locations within the continental United States. Customer bears all risk of loss or damage to the goods when they are placed on Haworth’s means of transport. 2. U.S.A. - Non-contiguous (Alaska, Hawaii and Puerto Rico) All deliveries will be CIF (U.C.C./2-320) (Cost of Goods, Insurance and Freight). Haworth’s catalog prices include ocean freight and insurance to the port of the final destination. Haworth has the right to determine the carrier, method of shipment and routing. Haworth will contract with the insurer and provide minimal insurance coverage (CIF @ 110%) made payable to the Customer. Customer is responsible to obtain greater insurance if so desired. Customer bears all risk of loss or damage to the goods when the goods are effectively at the disposal of the Customer on board the vessel at the named port of destination. Proof of delivery is a clean on board bill of lading. Customer will be responsible for all on-carriage from the receiving port to the final destination. 3. Canada All deliveries will be F.O.B. Destination (U.C.C./2-319). Haworth’s catalog prices include delivery to Customer’s named place, not unloaded from any arriving means of transport. Customer bears all risk of loss or damage to the goods when they are delivered to the Customer’s named facility not unloaded. Haworth will assume responsibility to file all freight claims with the carrier for any loss/damage which may occur while product is in transit, and will promptly repair or replace any damaged or lost product. Haworth requires the Customer to report all freight damage and/or loss to both the carrier and to Haworth. NOTE: Under all shipping terms (U.S.A. and Canada), any additional expense resulting from Customer’s request for expedited transportation, special services, packaging, handling, routing, and/or shipping method will be billed to Customer. 4. Mexico All deliveries will be DAF (Delivered at Frontier) (ICC Incoterms 2000). Haworth’s catalog prices include freight charges for normal surface transportation to a United States point of exportation within the 48 contiguous states. Haworth has the right to determine the carrier, method of shipment and routing.

Customer bears all risk of loss or damage to the goods when the goods are delivered to the named United States point of exportation. Haworth will provide customs clearance facilitation and arrangement of local delivery through an Authorized Dealer in Mexico, on a separately negotiated basis. Otherwise the Customer will be responsible for all customs clearance formalities and on-carriage from the United States point of exportation to the final destination in Mexico. 5. Ship Dates and Delay If Haworth cannot ship products as scheduled due to causes beyond its reasonable control (such as casualty, labor disputes, or accident; inability to obtain necessary labor, material or transportation; or changes requested by the Customer), the ship date will be extended to compensate for the delay as determined by Haworth. 6. Delivery Shortages and Damage Product shortages and damage must be noted on delivery receipts at the time of delivery and reported to the carrier for correction. Claims against Haworth for shortages, errors, or damage must be made within three (3) days of the date of delivery or the Customer waives the right to make such a claim. Signed Bill of Ladings or Delivery Receipt must be sent in with claims. 7. Storage Haworth may transfer product to storage at the Customer’s risk and expense if the Customer is unable or unwilling to take delivery of product as originally scheduled. Upon such transfer to storage, the Customer assumes risk of loss. Haworth will invoice the Customer for storage fees and the Customer will make payments in accordance with Haworth’s standard payment terms.

D. General Terms 1. Governing Law For products purchased for delivery in the U.S. pursuant hereto, this Agreement shall be governed by and construed according to the laws of the State of Michigan. Where Products are purchased for delivery in Canada pursuant hereto, this Agreement shall be governed by and construed according to the laws of the Province of Alberta. In either case, the parties attorn to the exclusive jurisdiction of the courts of Michigan and Alberta, respectively for the purpose of hearing any disputes arising under this Agreement or with respect to any Products sold pursuant hereto, and agree that the provisions of the United Nations Convention on Contracts for the International Sale of Goods and any other provision or law which would have the effect of applying the laws of any jurisdiction other than Michigan or Alberta, as the case may be, shall be excluded.

April 2008 / USA

381

UniGroup Too Price List

North American Terms of Sale

2. Force Majeure In the event that the performance of Customer or Haworth or its participating dealer assignee(s) would be prevented, restricted, interfered with or rendered commercially impracticable by reason of Force Majeure, then upon the giving of notice to the other parties, the party affected by the Force Majeure shall be excused from performing hereunder until the Force Majeure no longer prevents, restricts, interferes with, or renders such performance commercially impracticable. ‘‘Force Majeure’’ shall mean: fire, explosion, breakdown of plant, epidemic, hailstorm, snow/ice storms en route, hurricane, tornado, cyclone, flood or power failure; war, revolution, civil or military disturbances, acts of public enemies, acts of terrorism, blockade or embargo; any law, order, proclamation, regulation, ordinance, demand or requirement of any applicable governmental authority or any subdivision, authority, or representative of any such government; labor difficulties, including without limitation, strikes, slowdowns, picketing or boycotts; or difficulties beyond Haworth’s reasonable control in obtaining necessary raw materials, labor, fuels and electric power, components or facilities, and any other circumstances beyond the control of the party affected. 3. Delays by Customer Where Haworth has not received adequate site dimensions, Product specifications, shipping information, installation particulars or other information required by Haworth to permit the efficient manufacture of any Products, or where site conditions are not in accordance with the Installation Requirements set forth, or are not otherwise suitable to permit effective and efficient installation, the manufacture and/or delivery of Products may be delayed, and such event shall constitute a delay by the Customer. When manufacture, delivery or installation is delayed by the Customer or at the Customer’s request: (i) Haworth may, at its option, present the invoice for the full price of the Products to the Customer as then due and payable; (ii) the Customer shall pay to Haworth all reasonable storage, handling and other reasonable incidental expenses incurred by Haworth in connection with such delay; and (iii) the Customer shall bear all risk of loss or damage to the Products being held by Haworth for the Customer. 4. Use and Installation of Products Haworth recommends that its products be installed by certified, qualified and approved installers according to Haworth’s written installation procedures. The Customer agrees to use Haworth products properly; not to remove or alter safety devices, warnings, or operation instructions placed on products by Haworth, and to instruct employees as to the proper care and use of the products according to printed instructions.

382

April 2008 / USA

5. Warranty Haworth’s standard North American Lifetime Warranty will apply as appropriate. All product line warranty specifics are available in each catalog or upon request.

E. Services Service requests for design, installation, relocation, storage, etc. are handled by the local Haworth dealer on a separately negotiated basis. Contact the local Haworth dealer, affiliate or area sales office for more details. Scope of Work - Design Customer acknowledges that the Products to be manufactured or procured by Haworth in connection with the order are or may be custom manufactured for the Customer and that Haworth may be required to perform extensive work in relation to the design and specification of such Products. Where Customer requests that Haworth create as-built drawings or make more than two material revisions to any particular Product design or specification, Customer agrees that Haworth shall be entitled to invoice Customer with respect to such additional work on the basis of Haworth’s then prevailing rates for related design and specification services. Installation Requirements Where installation services are to be provided by Haworth, its Authorized Dealer or subcontractor, a document will be provided setting forth the scope of installation work to be performed (the ‘‘Scope of Work’’) and the price to be charged therefore. Unless otherwise specified in the scope of work, Haworth’s installation services are limited to products sold by Haworth with the exception of lighting, under floor electrical and data. General Conditions (a) Sufficient time shall be allocated by the Customer following delivery of Products and prior to Customer’s occupation of the premises to allow the installation of all Products during conventional working hours, Monday through Friday, 7:30 a.m. to 4:30 p.m. Where sufficient time is not allocated and Haworth is required or requested to perform installation work outside of such times, overtime charges shall be charged at Haworth’s then prevailing rates. (b) Haworth shall be given free and exclusive access to; (i) a loading dock within 150′ of the freight elevator or hoist, which loading dock shall be of sufficient size to enable full-size tractor-trailer deliveries to the premises (where required by Haworth); (ii) a freight elevator or hoist of sufficient size and capacity to allow the efficient movement of the Products; (iii) an unobstructed and safe pathway to the area where Products are to be stored or staged; (iv) a secure storage / staging area; (v) convenient trash facilities; (vi) adequate lighting;

(vii) a work site that complies with applicable health and safety legislation. Where such areas and facilities are not available, Haworth shall be entitled to bill Customer for all amounts incurred by Haworth for double-handling, product movement, lifting, hoisting, trash removal and any other resulting charges. (c) The installation site shall be free and clear of existing furniture, debris, or other obstructions (including construction in progress) and shall otherwise be in the reasonable opinion of Haworth ready for installation of the Products. Any building where Products are to be installed shall be fully closed in, dry and protected from the natural elements, with temperatures between 40°F and 90°F (4°C and 32°C) and relative humidity not to exceed 70% at all times including receipt of products, during and after installation and shall be adequately heated and/or air-conditioned. Where unusual site conditions exist which impede or prevent the normal installation of any Products, applicable extra charges shall apply at prevailing rates. (d) Haworth’s installation pricing is based upon the installation occurring as one continuous delivery and installation project. Phased installation pricing shall be provided by Haworth on a case by case basis. (e) Electrical hardwiring, plumbing and mechanical work is not included and shall be the responsibility of the Customer. (f) Except as may be otherwise specifically indicated, installation pricing does not apply to projects where union labor is required. Where Haworth has provided installation pricing on the basis that non-union labor be utilized, and where Haworth is required to use union labor or it otherwise becomes impractical to use non-union labor, or where Haworth is required by law to use prevailing wages, Haworth shall be entitled to charge the Customer for any cost differential between the anticipated cost of non-union labor and the actual cost of utilizing union or prevailing wage labor. (g) Haworth shall not be responsible for obtaining permits. Project / Site Conditions Lateral load bracing is not included in the scope of Haworth’s work and shall not be performed by Haworth. In areas where Nexus™ or TecCrete flooring Products are to be installed by Haworth overhead construction must be completed prior to the commencement of such work to avoid damage to the panels and finishes. The existing subfloor must be smooth, mopped clean, free of moisture, dust, dirt and debris. Once installed, the access floor must be maintained in the same manner. The subfloor must have a maximum vertical elevation deviation of 0.375′′ (10mm) over a horizontal span of 10′-0′′ (3m), and without discontinuities in floor slope. For greater certainty, the scope of Haworth’s installation work in such areas shall not be deemed to include any work required to level such subfloor, remove protrusions, remove pre-existing floor coverings or adhesives, or any other work which

UniGroup Too Price List

North American Terms of Sale

is required to remedy any conditions which may impede the efficient installation of Nexus™ flooring. Except as may be otherwise specifically indicated in the order, installation pricing for Nexus™ flooring Products and the Scope of Work in relation thereto shall not include any work required to remove and replace floor panels following their initial installation to provide tradespersons or others with access to the underpanel cable management cavity. In areas where movable walls are to be installed, all flooring (including carpeting) and ceiling components (including dropped ceiling grid components) shall be fully complete and ready for the installation of the movable wall products. Further, the existing floor (or other surface on which the movable wall panels are to be installed) shall have a maximum vertical deviation of 1.25′′ (30mm) and the dropped ceiling grid shall have a maximum vertical deviation of 0.375′′ (10mm) from the specifications to which such movable wall panels were designed and manufactured (collectively the ‘‘Permitted Tolerances’’), and shall otherwise comply with any site condition assumptions made known to Haworth prior to the manufacture of such Products (the ‘‘Site Assumptions’’). Where the Permitted Tolerances or Site Assumptions are not strictly adhered to or met, additional charges may be incurred in connection with site remediation and/or the modification or remanufacture of affected movable wall products, together with all resulting shipping and labor charges at Haworth’s then prevailing rates for such Products and services. Installation Change Orders Where Customer requests work to be performed or materials to be provided which are not contemplated in the Scope of Work, or Customer otherwise requests Products or services not contemplated in the order (collectively ‘‘Extras’’), prior to providing such Extras Haworth reserves the right to require the Customer to provide and sign a written Purchase Order or Change Order acceptable to Haworth describing the Extras and the amounts to be charged therefore, and the Customer agrees to pay such charges. Entire Agreement The order and this Agreement (including applicable Schedules) constitute the sole agreement between the parties and supercede any prior understanding or written or oral agreements between the parties (excluding National Sales Agreements). No waiver of any of the provisions of these Standard Terms and Conditions shall be binding on Haworth unless expressly agreed in writing.

Revision Date: April 5, 2008

April 2008 / USA

383

UniGroup Too Price List

Index

Products are listed alphabetically in this index by alpha-numeric prefix/suffix codes.

384

Product Code

Product Description

2371-6401

Panel Accessories – Panel Bridge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .141

Page

7031-0501

Panel Accessories – Friction Pad

AKP-2

Worksurface Accessories – Adjustable Keyboard Pad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .260

AKP-2P

Worksurface Accessories – Adjustable Keyboard Pad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .260

AKPF-1

Worksurface Accessories – Adjustable Keyboard Pad — Fixed Height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .261

AKPF-1P

Worksurface Accessories – Adjustable Keyboard Pad — Fixed Height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .261

AKPM-17-SLM

Worksurface Accessories – Adjustable Keyboard Pad with Swivel Mouse Pad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .259

AKPM-21-SLM

Worksurface Accessories – Adjustable Keyboard Pad with Swivel Mouse Pad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .259

AKPM-23-SFM

Worksurface Accessories – Adjustable Keyboard Pad with Swivel Mouse Pad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .259

AKPS-5

Worksurface Accessories – Extended Tilting Keyboard Pad

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .260

AKPS-5P

Worksurface Accessories – Extended Tilting Keyboard Pad

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .260

AKPT-3

Worksurface Accessories – Adjustable Keyboard Pad with Tilt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .260

AKPT-3P

Worksurface Accessories – Adjustable Keyboard Pad with Tilt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .260

AKPT-4

Worksurface Accessories – Adjustable Keyboard Pad with Tilt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .260

AKPT-4P

Worksurface Accessories – Adjustable Keyboard Pad with Tilt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .260

BBP-FH

if Panel Attached Screen – if Panel Attached Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29, 70, 130

BBP-FH

if Panel Attached Screen – Fabric . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29, 70, 130

BBP-GH

if Panel Attached Screen – if Panel Attached Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29, 70 ,130

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38, 80, 143

BBP-GH

if Panel Attached Screen – Frosted Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29, 70, 130

BBP-PH

if Panel Attached Screen – if Panel Attached Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29, 70, 130

BBP-PH

if Panel Attached Screen – Perforated Metal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29, 70, 130

BEDP

Electrical and Cable Management – Desktop Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .170

BFM-15-B

Electrical and Cable Management – Base Feed Module — Concealed Flatwire Connection — 3-Circuit . . . . . . . . . . . . . . . . . .157

BFM-1-6

Electrical and Cable Management – Base Feed Module — Hardwire Connection — 6-Circuit . . . . . . . . . . . . . . . . . . . . . . . . . . .157

BFM-1-B

Electrical and Cable Management – UniGroup Too, UniGroup and PLACES Base Feed Module — Hardwire Connection — 3-Circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .156

BFM-1-C

Electrical and Cable Management – Base Feed Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .161

BFM-2-A

Electrical and Cable Management – UniGroup Too, UniGroup and PLACES Base Feed Module (Canada) — Plug Connection — 1-Circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .156

BFM-2-B

Electrical and Cable Management – UniGroup Too, UniGroup and PLACES Base Feed Module — Plug Connection — 1-Circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .156

BFM-6-6

Electrical and Cable Management – Base Feed Module — Concealed Hardwire Connection — 6-Circuit . . . . . . . . . . . . . . . . .157

BFM-6-B

Electrical and Cable Management – Base Feed Module — Concealed Hardwire Connection — 3-Circuit . . . . . . . . . . . . . . . . .157

BFM-8-B

Electrical and Cable Management – UniGroup Too, UniGroup and PLACES Raised Floor Base Feed Module — 3-Circuit .156

CD-60-W

Worksurface Accessories – Wood Center Drawer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .257

CFTR-LT

950 Series Credenza Lateral File Accessories – Single Top, Laminate Surface — Radius or Square Edge . . . . . . . . . . . . . . .363

CFTR-W

950 Series Credenza Lateral File Accessories – Single Top, Wood Surface with Wood Trim — Radius or Square Edge . . .363

CFTS-LT

950 Series Credenza Lateral File Accessories – Single Top, Laminate Surface — Radius or Square Edge . . . . . . . . . . . . . . .363

CFTS-W

950 Series Credenza Lateral File Accessories – Single Top, Wood Surface with Wood Trim — Radius or Square Edge . . .363

CH-8

Panel Accessories – All-Purpose Hook

CJB-1

Electrical and Cable Management – Communication Junction Box

CMPF-1-BR

Electrical and Cable Management – UniGroup Too/UniGroup Cable Management Pole — One Channel . . . . . . . . . . . . . . . . .152

CMPT-1-B

Electrical and Cable Management – UniGroup Too/UniGroup Cable Management Pole — Two Channels . . . . . . . . . . . . . . . .152

CP

950 Series File Accessories – Compressor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .364

CW

950 Series File Accessories – Counterweight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .365

DBKC-48

Jump Stuff Rail Work Style Kits – Team Master Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .289

DBKP-48

Jump Stuff Rail Work Style Kits – File Master Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .289

DBKP-S

Jump Stuff Work Style Kits — Slat Pad Mounted – File Master Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .284

DBKS

Jump Stuff Rail Work Style Kits – Mini Master Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .290

DBKS-S

Jump Stuff Work Style Kits — Slat Pad Mounted – Mini Master Kit

DBKT-48

Jump Stuff Rail Work Style Kits – Task Master Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .289

DBKT-S

Jump Stuff Work Style Kits — Slat Pad Mounted – Task Master Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .284

April 2008 / USA

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .165

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .284

UniGroup Too Price List

Index

Product Code

Product Description

DLWL-F

Lighting — Jump Stuff – Wing Light — Freestanding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .296

Page

DLWL-H

Lighting — Jump Stuff – Wing Light — Panel Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .296

DLWL-R

Lighting — Jump Stuff – Wing Light — Rail Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .296

DLWL-U

Lighting — Jump Stuff – Wing Light — Under Shelf Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .296

DMSP

Jump Stuff Slat Pad Tools – Mini Shelf

DPKC-48

Jump Stuff Rail Work Style Kits – Team Master Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .289

DPKP-48

Jump Stuff Rail Work Style Kits – File Master Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .289

DPKP-S

Jump Stuff Work Style Kits — Slat Pad Mounted – File Master Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .284

DPKS

Jump Stuff Rail Work Style Kits – Mini Master Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .290

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .281

DPKS-S

Jump Stuff Work Style Kits — Slat Pad Mounted – Mini Master Kit

DPKT-48

Jump Stuff Rail Work Style Kits – Task Master Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .289

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .284

DPKT-S

Jump Stuff Work Style Kits — Slat Pad Mounted – Task Master Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .284

DPKY-1

Jump Stuff Rail Tools – Pile Master Kit

DPWF-D

950 Series Freestanding Pedestals — Wood Top/Front – Freestanding Pedestal — Pencil/Box/File — Wood Top and Front .340

DPWF-H

950 Series Freestanding Pedestals — Wood Top/Front – Freestanding Pedestal — Box/Box/File — Wood Top and Front .340

DPWF-J

950 Series Freestanding Pedestals — Wood Top/Front – Freestanding Pedestal — File/File — Wood Top and Front . . . . .340

DPWM-D

950 Series Mobile Pedestals — Wood Top/Front – Mobile Pedestal — Pencil/Box/File — Wood Top and Front . . . . . . . . . . .339

DPWM-H

950 Series Mobile Pedestals — Wood Top/Front – Mobile Pedestal — Box/Box/File — Wood Top and Front . . . . . . . . . . . . .339

DPWM-J

950 Series Mobile Pedestals — Wood Top/Front – Mobile Pedestal — File/File — Wood Top and Front . . . . . . . . . . . . . . . . .339

DPWS-A

950 Series Suspended Pedestals — Wood Front – Suspended Pedestal — Box/File — Wood Front . . . . . . . . . . . . . . . . . . . . .336

DPWS-B

950 Series Suspended Pedestals — Wood Front – Suspended Pedestal — Box/Box/Box — Wood Front . . . . . . . . . . . . . . . .336

DPWS-D

950 Series Suspended Pedestals — Wood Front – Suspended Pedestal — Pencil/Box/File — Wood Front . . . . . . . . . . . . . .336

DPWS-H

950 Series Suspended Pedestals — Wood Front – Suspended Pedestal — Box/Box/File — Wood Front

DPWS-J

950 Series Suspended Pedestals — Wood Front – Suspended Pedestal — File/File — Wood Front . . . . . . . . . . . . . . . . . . . . .337

DPWX-H

950 Series Attached Pedestals — Systems Application — Wood Front – Attached Pedestal — Box/Box/File — Wood Front .338

DPWX-J

950 Series Attached Pedestals — Systems Application — Wood Front – Attached Pedestal — File/File — Wood Front . . . .338

DS-3

Worksurface Accessories – Shallow Drawer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .257

DSR-F

Jump Stuff Rail Mounting Systems – Freestanding Mount Rail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .287

DSR-H

Jump Stuff Rail Mounting Systems – Panel Mount Rail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .286

DSR-L

Jump Stuff Rail Mounting Systems – Wall Mount Rail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .287

DSR-W

Jump Stuff Rail Mounting Systems – Worksurface Mount Rail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .286

DTAR-3

Jump Stuff Slat Pad Tools – Personal Shelf Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .282

DTBS-3

Jump Stuff Slat Pad Tools – Phone Shelf Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .282

DTES-1

Jump Stuff Rail Tools – Personal Shelf . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .288

DTES-3

Jump Stuff Slat Pad Tools – Personal Shelf . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .282

DTGK-3

Jump Stuff Slat Pad Tools – Gooseneck Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .281

DTHT-1

Jump Stuff Freestanding Tools – Tote Strap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .285

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .288

. . . . . . . . . . . . . . . .337

DTLS-2

Jump Stuff Freestanding Tools – Letter Tray Stacking Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .285

DTLT-2

Jump Stuff Rail and Slat Pad Tools – Letter Tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .283

DTPR-1

Jump Stuff Rail Tools – Paper Sorter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .288

DTPR-3

Jump Stuff Slat Pad Tools – Paper Sorter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .282

DTPT-1

Jump Stuff Rail Tools – Phone Shelf . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .288

DTPT-3

Jump Stuff Slat Pad Tools – Phone Shelf . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .282

DTRB

Jump Stuff Freestanding Tools – Waste Bin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .285

DTSB-1

Jump Stuff Freestanding Tools – Letter Tray Stacking Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .285

DTSB-3

Jump Stuff Slat Pad Tools – Binder Bin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .281

DTTE-3

Jump Stuff Slat Pad Tools – Tote . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .281

DTTH-3

Jump Stuff Slat Pad Tools – Tote . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .281

DTTS-12

Jump Stuff Slat Pad Tools – Tack Strip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .281

DTTS-24

Jump Stuff Slat Pad Tools – Tack Strip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .281

DTWC-2

Jump Stuff Rail and Slat Pad Tools – Tool Cup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .283

E2AG

Glazed Add-On Panel – Glazed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27

E2AL-1

Panel Accessories – UniGroup Too Top Cap Aligner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35 April 2008 / USA

385

UniGroup Too Price List

Index

386

Product Code

Product Description

E2AM

Monolithic Fabric Add-On Panel – Fabric . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26

Page

E2BN-B

Monolithic Panel Core with Square Painted Top Cap — without Inserts – Panel Core . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

E2CA-120

Panel Accessories – 120° Square Painted Top Cap for 2-Way or 3-Way . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34

E2CC-90

Panel Accessories – 90° Square Painted Top Cap for 2-Way, 3-Way, 4-Way . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33

E2CH-8

Panel Accessories – Coat Hook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38

E2DN-B

Laminate Monolithic Panel with Square Painted Top Cap – Laminate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

E2DS

Doors with Square Painted Top Cap – Single Door — Laminate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28

E2EC-1

Panel Accessories – UniGroup Too Top Cap End Plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35

E2FA

Panel Accessories – 120° Full-Height Finish Post — Square Painted Top Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31

E2FA-V

Panel Accessories – 120° Variable-Height Finish Post — Square Painted Top Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31

E2FC

Panel Accessories – 90° Full-Height Finish Post — Square Painted Top Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30

E2FC-V

Panel Accessories – 90° Variable-Height Finish Post — Square Painted Top Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30

E2FM

Electrical and Cable Management – UniGroup Too Top Feed Module — 3-Circuit

E2FM-6

Electrical and Cable Management – UniGroup Too Top Feed Module — 6-Circuit 10′ Ceiling Height

E2FM-PL

Electrical and Cable Management – UniGroup Too, UniGroup, PLACES Chicago Hardwire / International Top Feed Module .162

E2FM-X

Electrical and Cable Management – UniGroup Too Top Feed Module — 3-Circuit

E2FS

Panel Accessories – 180° Full-Height Finish Post — Square Painted Top Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32

E2FS

Panel Accessories – 180° Vertical Cover only, (no top cap or base raceway cover) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33

E2FS-V

Panel Accessories – 180° Variable-Height Finish Post — Square Painted Top Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32

E2GN-B

Glazed Monolithic Panel with Square Painted Top Cap – Glazed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .146 . . . . . . . . . . . . . . . . . . . .147

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .146

E2JF

Single Base Insert – Base Insert — Fabric . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

E2LN-B

Monolithic Panel with Full-Height Inserts and Square Painted Top Cap – Fabric Inserts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

E2MN-B

Basic Monolithic Panel with Square Painted Top Cap – Fabric . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

E2PA

Panel Accessories – 120° Full-Height Finish Post — Square Painted Top Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31

E2PA-V

Panel Accessories – 120° Variable-Height Finish Post — Square Painted Top Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31

E2PC

Panel Accessories – 90° Full-Height Finish Post — Square Painted Top Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30

E2PC-120-B

Panel Accessories – 120° Power Connector Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31

E2PC-90-B

Panel Accessories – 90° Power Connector Cover — Square Profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30

E2PC-V

Panel Accessories – 90° Variable-Height Finish Post — Square Painted Top Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30

E2PS

Panel Accessories – 180° Full-Height Finish Post — Square Painted Top Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32

E2PS

Panel Accessories – 180° Vertical Cover only, (no top cap or base raceway cover) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33

E2SN-B

Monolithic Panel with Segmented Inserts and Square Painted Top Cap – Fabric Inserts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

E2TF

Single Upper Inserts – Upper Insert — Fabric or Markerboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

E2TK

Panel Accessories – T-Mount Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38

E2TM

Single Upper Inserts – Upper Insert — Fabric or Markerboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

E2TS-P

Panel Accessories – Retrofit Kits – Square Painted Top Caps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44

E2TS-T

Panel Accessories – Retrofit Kits – Square Painted Top Caps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39

E2TS-U

Panel Accessories – Retrofit Kits – Square Painted Top Caps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39

E2UR-A

Panel Accessories – Retrofit Kits – Trim Strip for UniGroup Fabric and Glazed Add-On Panels . . . . . . . . . . . . . . . . . . . . . . . . . . .39

EAC-4280-BHL

Doors with Radius Steel Top Cap – Single Door with ADA Lever and Kick Plate — Laminate

EAF

Monolithic Fabric Add-On Panel – Fabric . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64

. . . . . . . . . . . . . . . . . . . . . . . . . . . .68

EAG

Monolithic Glazed Add-On Panel – Glazed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66

EC-10-B

Electrical and Cable Management – Base Raceway End Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .165

EC-10-B

Panel Accessories – Base Raceway End Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35

EDG-BHL

Doors with Radius Steel Top Cap – Single Door — Glazed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69

EDG-BKL

Doors with Radius Steel Top Cap – Single Door — Glazed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69

EDMC-BHL

Doors with Radius Steel Top Cap – Single Door — Glazed, with Classic Muntins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69

EDMC-BKL

Doors with Radius Steel Top Cap – Single Door — Glazed, with Classic Muntins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69

EDN-B

Laminate Monolithic Panel with Radius Steel Top Cap – Laminate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58

EDP-6

Laminate Monolithic Panel with Radius Steel Top Cap – Laminate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58

EDP-B

Laminate Monolithic Panel with Radius Steel Top Cap – Laminate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58

EDS-BHL

Doors with Radius Steel Top Cap – Single Door — Laminate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68

EDS-BKL

Doors with Radius Steel Top Cap – Single Door — Laminate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68

April 2008 / USA

UniGroup Too Price List

Index

Product Code

Product Description

EFN-B

Monolithic Panel with Radius Steel Top Cap – Fabric . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54

Page

EFP-6

Monolithic Panel with Radius Steel Top Cap – Fabric . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54

EFP-B

Monolithic Panel with Radius Steel Top Cap – Fabric . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54

EGN-B

Glazed Monolithic Panel with Radius Steel Top Cap – Glazed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62

EGP-6

Glazed Monolithic Panel with Radius Steel Top Cap – Glazed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62

EGP-B

Glazed Monolithic Panel with Radius Steel Top Cap – Glazed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62

ELPS-V

Panel Accessories – 180° Variable-Height Finish Post — Square Painted Top Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32

EMN-B

Basic Monolithic Panel with Radius Steel Top Cap – Fabric . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56

EMP-6

Basic Monolithic Panel with Radius Steel Top Cap – Fabric . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56

EMP-B

Basic Monolithic Panel with Radius Steel Top Cap – Fabric . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56

EON-B

Open Frame Panel with Radius Steel Top Cap – Open-Frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60

EOP-6

Open Frame Panel with Radius Steel Top Cap – Open-Frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60

EOP-B

Open Frame Panel with Radius Steel Top Cap – Open-Frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60

ERRW

Panel Accessories – End-of-Run — Variable Height Finish Post Coped End — Radius Wood Top Cap — Wood Surface . . .76

ERRW-B

Panel Accessories – End-of-Run Finish Post — Radius Wood Top Cap — Wood Surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .76

ETCR

Electrical and Cable Management – Expanded Top Cap Raceway . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .167

EUE1-1331W

Electrical and Cable Management – Flip Top Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .171

EUE1-C331W

Electrical and Cable Management – Flip Top Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .171

EUE2-1331W

Electrical and Cable Management – Flip Top Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .171

EUE2-C331W

Electrical and Cable Management – Flip Top Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .171

FC-1

Electrical and Cable Management – Expanded Top Finish Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .167

FC-2

Electrical and Cable Management – Expanded Top Finish Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .167

FC-3

Electrical and Cable Management – Expanded Top Finish Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .167

FC-4

Electrical and Cable Management – Expanded Top Finish Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .167

FC-90

Electrical and Cable Management – Expanded Top Finish Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .167

FDRF

UniGroup Shelves and Flipper Doors – Regular Flipper Door Front — Fabric or Laminate Door Front . . . . . . . . . . . . . . . . . . . .270

FDRV

UniGroup Shelves and Flipper Doors – Regular Flipper Door Front — Fabric or Laminate Door Front . . . . . . . . . . . . . . . . . . . .270

FNW-B

Monolithic Panel with Radius Wood Top Cap – Fabric . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50

FPC-2

Panel Accessories – Radius Steel Top Cap for 3-Way and 4-Way . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77

FPCW-2

Panel Accessories – 90° Top Cap for Radius Wood Top Cap — Wood Surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77

FPFC-B

Panel Accessories – 90° Finish Post — Radius Steel Top Cap— Fabric Surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73

FPFS-B

Panel Accessories – 180° Finish Post — Radius Steel Top Cap — Fabric Surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .75

FPPC-B

Panel Accessories – 90° Finish Post — Radius Steel Top Cap— Painted Surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73

FPPS-B

Panel Accessories – 180° Finish Post — Radius Steel Top Cap — Painted Surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .75

FPW-6

Monolithic Panel with Radius Wood Top Cap – Fabric . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50

FPW-B

Monolithic Panel with Radius Wood Top Cap – Fabric . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50

FTB-15

950 Series File Accessories – Front-to-Back Hanging Bars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .365

GNW-B

Glazed Monolithic Panel with Radius Wood Top Cap – Glazed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52

GPW-6

Glazed Monolithic Panel with Radius Wood Top Cap – Glazed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52

GPW-B

Glazed Monolithic Panel with Radius Wood Top Cap – Glazed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52

H2FA

Panel Accessories – Retrofit Kits – 120° Full-Height Finish Post — Square Painted Top Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46

H2FA-V

Panel Accessories – Retrofit Kits – 120° Variable-Height Finish Post — Square Painted TopCap . . . . . . . . . . . . . . . . . . . . . . . . .46

H2FC

Panel Accessories – Retrofit Kits – 90° Full-Height Finish Post — Square Painted Top Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45

H2FC-V

Panel Accessories – Retrofit Kits – 90° Variable-Height Finish Post — Square Painted TopCap . . . . . . . . . . . . . . . . . . . . . . . . . .45

H2FS

Panel Accessories – Retrofit Kits – 180° Full-Height Finish Post — Square Painted Top Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47

H2FS-V

Panel Accessories – Retrofit Kits – 180° Variable-Height Finish Post — Square Painted Top Cap . . . . . . . . . . . . . . . . . . . . . . . .48

H2PA

Panel Accessories – Retrofit Kits – 120° Full-Height Finish Post — Square Painted Top Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46

H2PA-V

Panel Accessories – Retrofit Kits – 120° Variable-Height Finish Post — Square Painted TopCap . . . . . . . . . . . . . . . . . . . . . . . . .46

H2PC

Panel Accessories – Retrofit Kits – 90° Full-Height Finish Post — Square Painted Top Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45

H2PC-V

Panel Accessories – Retrofit Kits – 90° Variable-Height Finish Post — Square Painted TopCap . . . . . . . . . . . . . . . . . . . . . . . . . .45

H2PS

Panel Accessories – Retrofit Kits – 180° Full-Height Finish Post — Square Painted Top Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47

H2PS-V

Panel Accessories – Retrofit Kits – 180° Variable-Height Finish Post — Square Painted Top Cap . . . . . . . . . . . . . . . . . . . . . . . .48

HAB

Panel Accessories – Seismic Anchoring Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38, 80, 143 April 2008 / USA

387

UniGroup Too Price List

Index

388

Product Code

Product Description

HAF

Monolithic Fabric Add-On Panel – Fabric

Page

HAG

Monolithic Glazed Add-On Panel – Glazed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .126

HB

950 Series File Accessories – Side-to-Side Hanging Bars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .364

HBG

Shelf Accessories – UniGroup/PLACES Shelf Back Guard

HCC-0002

Worksurface Accessories – Dual-Leg Base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .253

HCCP-F4

Electrical and Cable Management – PLACES Cable Management Post — Variable Height — Three-Way 90° — Fabric or Painted Surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .155

HCCP-V4

Electrical and Cable Management – PLACES Cable Management Post — Variable Height — Three-Way 90° — Fabric or Painted Surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .155

HCH-0008

Panel Accessories – All-Purpose Hook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .143

HCH-0008-W

Panel Accessories – All-Purpose Hook — For Low Profile Wood Top Cap Panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .143

HCPA

Electrical and Cable Management – PLACES Cable Management Pole — For 10′(3048mm)-High Ceiling . . . . . . . . . . . . . . . .153

HCPA

Electrical and Cable Management – PLACES Cable Management Pole — For 12′(3658mm)-High Ceiling . . . . . . . . . . . . . . . .154

HCPA

Electrical and Cable Management – PLACES Cable Management Pole — Panel Height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .153

HCPE

Electrical and Cable Management – PLACES Cable Management Pole — For 10′(3048mm)-High Ceiling . . . . . . . . . . . . . . . .153

HCPE

Electrical and Cable Management – PLACES Cable Management Pole — For 12′(3658mm)-High Ceiling . . . . . . . . . . . . . . . .154

HCPS

Electrical and Cable Management – PLACES Cable Management Pole — For 10′(3048mm)-High Ceiling . . . . . . . . . . . . . . . .153

HCPS

Electrical and Cable Management – PLACES Cable Management Pole — For 12′(3658mm)-High Ceiling . . . . . . . . . . . . . . . .154

HCPS

Electrical and Cable Management – PLACES Cable Management Pole — Panel Height . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .153

HDG-L

Doors with Low Profile Steel Top Cap – Single Door — Glazed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .128

HDG-R

Doors with Low Profile Steel Top Cap – Single Door — Glazed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .128

HDMC-L

Doors with Low Profile Steel Top Cap – Single Door — Glazed with Classic Muntins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .129

HDMC-R

Doors with Low Profile Steel Top Cap – Single Door — Glazed with Classic Muntins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .129

HDMH-L

Doors with Low Profile Steel Top Cap – Single Door — Glazed with Horizontal Muntins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .129

HDMH-R

Doors with Low Profile Steel Top Cap – Single Door — Glazed with Horizontal Muntins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .129

HDPC

Panel Accessories – 90° Finish Post — Low Profile Steel Top Cap — Painted Surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .134

HDPS

Panel Accessories – 180° Finish Post — Low Profile Steel Top Cap— Painted Surface

HDS-L

Doors with Low Profile Steel Top Cap – Single Door— Laminate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .128

HDS-LT

Single Door and Frame with Low Profile Wood Top Cap – Single Door — Wood . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .104

HE

Panel Accessories – Hinges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37

HE

Panel Accessories – Hinges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .78

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .124

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .273

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .135

HFDR-F

PLACES Flipper Doors/Overhead Storage – Regular Flipper Door Front — Fabric or Laminate . . . . . . . . . . . . . . . . . . . . . . . . .272

HFDR-P

PLACES Flipper Doors/Overhead Storage – Regular Flipper Door Front — Fabric or Laminate . . . . . . . . . . . . . . . . . . . . . . . . .272

HFER-T

Panel Accessories – End-of-Run Finish Post — Low Profile Wood Top Cap — Fabric Surface . . . . . . . . . . . . . . . . . . . . . . . . . .136

HFN

Monolithic Fabric Panel with Low Profile Steel Top Cap – Fabric . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106

HFN-H

High-Performance Monolithic Fabric Panel/Low Profile Steel Top Cap – Fabric . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110

HFN-T

Monolithic Fabric Panel with Low Profile Wood Top Cap – Fabric . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .88

HFP

Monolithic Fabric Panel with Low Profile Steel Top Cap – Fabric . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106

HFP-1

Ported Monolithic Fabric Panel with Low Profile Steel Top Cap – Fabric Ported— One Port Each Side . . . . . . . . . . . . . . . . . . .114

HFP-1T

Ported Monolithic Fabric Panel with Low Profile Wood Top Cap – Fabric Ported — One Port Each Side . . . . . . . . . . . . . . . . . . .94

HFP-2

Ported Monolithic Fabric Panel with Low Profile Steel Top Cap – Fabric Ported — Two Ports, Same Side . . . . . . . . . . . . . . . .116

HFP-2T

Ported Monolithic Fabric Panel with Low Profile Wood Top Cap – Fabric Ported — Two Ports, Same Side . . . . . . . . . . . . . . . .96

HFP-4

Ported Monolithic Fabric Panel with Low Profile Steel Top Cap – Fabric Ported — Four Ports, Two Each Side . . . . . . . . . . . .118

HFP-4T

Ported Monolithic Fabric Panel with Low Profile Wood Top Cap – Fabric Ported — Four Ports, Two Each Side . . . . . . . . . . . .98

HFP-6

Monolithic Fabric Panel with Low Profile Steel Top Cap – Fabric . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106

HFPC

Panel Accessories – 90° Finish Post — Low Profile Steel Top Cap — Fabric Surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .133

HFPC-T

Panel Accessories – 90° Finish Post — Low Profile Wood Top Cap — Fabric Surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .133

HFP-H

High-Performance Monolithic Fabric Panel/Low Profile Steel Top Cap – Fabric . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110

HFP-H6

High-Performance Monolithic Fabric Panel/Low Profile Steel Top Cap – Fabric . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110

HFP-L

Ported Monolithic Fabric Panel with Low Profile Steel Top Cap – Fabric Ported — One Port Right or Left . . . . . . . . . . . . . . . .112

HFP-LT

Ported Monolithic Fabric Panel with Low Profile Wood Top Cap – Fabric Ported — One Port Right or Left . . . . . . . . . . . . . . . . .92

HFP-R

Ported Monolithic Fabric Panel with Low Profile Steel Top Cap – Fabric Ported — One Port Right or Left . . . . . . . . . . . . . . . .112

HFP-RT

Ported Monolithic Fabric Panel with Low Profile Wood Top Cap – Fabric Ported — One Port Right or Left . . . . . . . . . . . . . . . . .92

April 2008 / USA

UniGroup Too Price List

Index

Product Code

Product Description

HFPS

Panel Accessories – 180° Finish Post — Low Profile Steel Top Cap— Fabric Surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .135

Page

HFPS-T

Panel Accessories – 180° Finish Post — Low Profile Wood Top Cap — Fabric Surface

HFP-T

Monolithic Fabric Panel with Low Profile Wood Top Cap – Fabric . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .88

HFP-T6

Monolithic Fabric Panel with Low Profile Wood Top Cap – Fabric . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .88

HGBN

Wire Grid System and Accessories – Multi-Purpose Storage Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .292

HGDB-0004

Wire Grid System and Accessories – Diskette Bin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .292

HGMB-0002

Wire Grid System and Accessories – Mailbox . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .291

HGN

Glazed Monolithic Panels with Low Profile Steel Top Cap – Glazed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .122

HGN-T

Glazed Monolithic Panel with Low Profile Wood Top Cap – Glazed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .102

HGP

Glazed Monolithic Panels with Low Profile Steel Top Cap – Glazed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .122

HGP-6

Glazed Monolithic Panels with Low Profile Steel Top Cap – Glazed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .122

HGP-T

Glazed Monolithic Panel with Low Profile Wood Top Cap – Glazed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .102

HGP-T6

Glazed Monolithic Panel with Low Profile Wood Top Cap – Glazed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .102

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .135

HGR

Wire Grid System and Accessories – Grid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .291

HGRT-0001

Wire Grid System and Accessories – Reference Tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .291

HGRY

Markerboards/Wall Accessory Slat Pad – Wall Accessory Slat Pad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .280

HGTS

Wire Grid System and Accessories – Grid Tackstrip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .292

HHE

Panel Accessories – Hinges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .141

HIAE

Panel Accessories – Pre-hinged Side Trim Rails — Angled or Straight-Line Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81

HISE

Panel Accessories – Pre-hinged Side Trim Rails — Angled or Straight-Line Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81

HKMP-1

Worksurface Accessories – Boogie Board Mouse Pad

HKTC-M

Worksurface Accessories – Boogie Board Keyboard Tray with Palm Rest and Integrated Mouse Pad . . . . . . . . . . . . . . . . . . . .258

HKTC-N

Worksurface Accessories – Boogie Board Keyboard Tray with Palm Rest . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .258

HKTE-M

Worksurface Accessories – Boogie Board Keyboard Tray with Palm Rest and Integrated Mouse Pad . . . . . . . . . . . . . . . . . . . .258

HKTE-N

Worksurface Accessories – Boogie Board Keyboard Tray with Palm Rest . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .258

HM

Worksurface Accessories – Modesty Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .253

HMB

Markerboards/Wall Accessory Slat Pad – Markerboard — Magnetic Surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .280

HMKT

Panel Accessories – T-Mount Kit — Center and End Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .142

HMN

Basic Monolithic Fabric Panel with Low Profile Steel Top Cap – Fabric . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .108

HMN-T

Basic Monolithic Fabric Panel with Low Profile Wood Top Cap – Fabric . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .90

HMP

Basic Monolithic Fabric Panel with Low Profile Steel Top Cap – Fabric . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .108

HMP-1

Worksurface Accessories – Mouse Pad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .262

HMP-2

Worksurface Accessories – Mouse Pad with Horizontal Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .262

HMP-3

Worksurface Accessories – Mouse Pad with Horizontal and Height Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .262

HMP-6

Basic Monolithic Fabric Panel with Low Profile Steel Top Cap – Fabric . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .108

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .258

HMP-T

Basic Monolithic Fabric Panel with Low Profile Wood Top Cap – Fabric . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .90

HMP-T6

Basic Monolithic Fabric Panel with Low Profile Wood Top Cap – Fabric . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .90

HMSC

Mini Shelves – Corner Mini-Shelf . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .268

HMSS

Mini Shelves – Straight Mini-Shelf . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .268

HNAM

Markerboards/Wall Accessory Slat Pad – Markerboard — Non-Magnetic Surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .280

HNEH-8

Worksurface Accessories – Wire Management Loop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .254

HON

Open Frame Monolithic Panel with Low Profile Steel Top Cap – Open Frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .120

HON-T

Open Frame Monolithic Panel with Low Profile Wood Top Cap – Open Frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100

HOP

Open Frame Monolithic Panel with Low Profile Steel Top Cap – Open Frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .120

HOP-6

Open Frame Monolithic Panel with Low Profile Steel Top Cap – Open Frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .120

HOP-T

Open Frame Monolithic Panel with Low Profile Wood Top Cap – Open Frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100

HOP-T6

Open Frame Monolithic Panel with Low Profile Wood Top Cap – Open Frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100

HOR3-WP

PLACES Flipper Doors/Overhead Storage – Regular Overhead — Painted Case — Wood Door Front — Wood Pull . . . . . .272

HORS

OneTouch Overhead Storage Unit – Overhead Storage Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .269

HPER

Panel Accessories – End-of-Run Finish Post — Low Profile Steel Top Cap — Fabric Surface . . . . . . . . . . . . . . . . . . . . . . . . . . .136

HPPC-0001

Electrical and Cable Management – Ported Panel Cover Plates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .168

HPPC-0002

Electrical and Cable Management – Ported Panel Cover Plates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .168

HPPC-0002-CL

Electrical and Cable Management – Chicago Ported Panel Cover Plates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .169 April 2008 / USA

389

UniGroup Too Price List

Index

390

Product Code

Product Description

HPPC-0002-CU

Electrical and Cable Management – Chicago Ported Panel Cover Plates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .169

Page

HPPC-0003

Electrical and Cable Management – Ported Panel Cover Plates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .168

HPPC-0003-CL

Electrical and Cable Management – Chicago Ported Panel Cover Plates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .169

HPPC-0003-CU

Electrical and Cable Management – Chicago Ported Panel Cover Plates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .169

HPPC-0004

Electrical and Cable Management – Ported Panel Cover Plates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .168

HPPC-0004-CL

Electrical and Cable Management – Chicago Ported Panel Cover Plates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .169

HPPC-0004-CU

Electrical and Cable Management – Chicago Ported Panel Cover Plates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .169

HPPC-0005

Electrical and Cable Management – Ported Panel Cover Plates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .168

HPPC-0005-C

Electrical and Cable Management – Chicago Ported Panel Cover Plates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .169

HPPC-0008

Electrical and Cable Management – Ported Panel Cover Plates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .168

HRE

Panel Accessories – Side Trim Rail With Notch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .141

HREH

Panel Accessories – Full Height Side Trim Rail – for use with Add-On Panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .141

HSCP-F1

Electrical and Cable Management – PLACES Cable Management Post — Variable Height — Three-Way 180° — Fabric or Painted Surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .155

HSCP-F2

Electrical and Cable Management – PLACES Cable Management Post — Variable Height — Two-Way 90° — Fabric or Painted Surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .155

HSCP-F3

Electrical and Cable Management – PLACES Cable Management Post — Variable Height — In-Line — Fabric or Painted Surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .155

HSCP-V1

Electrical and Cable Management – PLACES Cable Management Post — Variable Height — Three-Way 180° — Fabric or Painted Surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .155

HSCP-V2

Electrical and Cable Management – PLACES Cable Management Post — Variable Height — Two-Way 90° — Fabric or Painted Surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .155

HSCP-V3

Electrical and Cable Management – PLACES Cable Management Post — Variable Height — In-Line — Fabric or Painted Surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .155

HSL

PLACES Shelves – Low Shelf — Painted . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .271

HSR

PLACES Shelves – Regular Shelf — Painted . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .271

HTB

Tack Strips/Tackboards – Tack Strip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .278

HTB

Tack Strips/Tackboards – Tackboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .278

HTB-H

Tack Strips/Tackboards – Tack Strip — Monolithic High-Performance Acoustical Panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .279

HTB-H

Tack Strips/Tackboards – Tackboard — Monolithic High-Performance Acoustical Panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .279

HTCC-0090

Panel Accessories – 90° Low Profile Wood Top Cap for 2-Way . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .139

HTCE

Panel Accessories – End-of-Run Finish Post — Wood Top Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .140

HTCS-0180

Panel Accessories – 180° Low Profile Wood Top Cap for 3-Way . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .139

HTCT-T

Tables – Laminate C-Leg Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .367

HTCW

Panel Accessories – Low Profile Wood Top Cap Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .139

HTCW-0002

Panel Accessories – In-Line Low Profile Wood Top Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .139

HTCW-T

Tables – Laminate C-Leg Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .367

HTF-0004

Panel Accessories – Low Profile Steel Top Cap for 3-Way and 4-Way . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .140

HTFM

Electrical and Cable Management – PLACES Top Feed Module — 3-Circuit 10′ Ceiling Height . . . . . . . . . . . . . . . . . . . . . . . . .150

HTFM

Electrical and Cable Management – PLACES Top Feed Module — 6-Circuit 10′ Ceiling Height . . . . . . . . . . . . . . . . . . . . . . . . .151

HTFM-X

Electrical and Cable Management – PLACES Top Feed Module — 3-Circuit 12′ Ceiling Height . . . . . . . . . . . . . . . . . . . . . . . . .150

HTFW-0004

Panel Accessories – 90° Low Profile Wood Top Cap for 4-Way . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .139

HTL-0001-F

Pivot-Head Task Lighting – Freestanding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .297

HTL-0001-G

Pivot-Head Task Lighting – Grid-Mounted . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .297

HTL-0001-P

Pivot-Head Task Lighting – Panel-Hung . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .297

HTLB-0001-G

Pivot-Head Task Lighting – Grid-Mount Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .298

HTLB-0001-P

Pivot-Head Task Lighting – Panel-Hung Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .298

HUCC-LA

Sit-to-Stand Adjustable Height Tables – Curved Corner — Laminate — T-Mold Edge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .369

HUCC-LF

Sit-to-Stand Fixed Height Tables – Curved Corner — Laminate — T-Mold Edge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .371

HUCK-2442-LA

Sit-to-Stand Adjustable Height Tables – Split Corner — Laminate — T-Mold Edge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .369

HUCK-2442-LF

Sit-to-Stand Fixed Height Tables – Split Corner — Laminate — T-Mold Edge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .371

HUCK-3048-LA

Sit-to-Stand Adjustable Height Tables – Split Corner — Laminate — T-Mold Edge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .369

HUCK-3048-LF

Sit-to-Stand Fixed Height Tables – Split Corner — Laminate — T-Mold Edge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .371

HUCS-2436-LA

Sit-to-Stand Adjustable Height Tables – Corner — Laminate — T-Mold Edge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .368

April 2008 / USA

UniGroup Too Price List

Index

Product Code

Product Description

HUCS-2436-LF

Sit-to-Stand Fixed Height Tables – Corner — Laminate — T-Mold Edge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .370

Page

HUCS-2442-LA

Sit-to-Stand Adjustable Height Tables – Corner — Laminate — T-Mold Edge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .368

HUCS-2448-LA

Sit-to-Stand Adjustable Height Tables – Corner — Laminate — T-Mold Edge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .368

HUCS-3048-LA

Sit-to-Stand Adjustable Height Tables – Corner — Laminate — T-Mold Edge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .368

HURS-LA

Sit-to-Stand Adjustable Height Tables – Rectangular — Laminate — T-Mold Edge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .368

HURS-LF

Sit-to-Stand Fixed Height Tables – Rectangular — Laminate — T-Mold Edge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .370

HVFE

Panel Accessories – End-of-Run Variable Height Finish Post — Regular — Low Profile Wood Top Cap — Fabric Surface .138

HVFE-C

Panel Accessories – End-of-Run Variable Height Finish Post — Coped — Low Profile Wood Top Cap — Fabric Surface . .137

HVWE

Panel Accessories – End-of-Run Variable Height Finish Post — Regular — Low Profile Wood Top Cap — Wood Surface .138

HVWE-C

Panel Accessories – End-of-Run Variable Height Finish Post — Coped — Low Profile Wood Top Cap — Wood Surface . .137

HWER-T

Panel Accessories – End-of-Run Finish Post — Low Profile Wood Top Cap — Wood Surface

HWFN-T

Monolithic Wood/Fabric Panel with Low Profile Wood Top Cap – Wood/Fabric . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84

HWFP-T

Monolithic Wood/Fabric Panel with Low Profile Wood Top Cap – Wood/Fabric . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84

HWFP-T6

Monolithic Wood/Fabric Panel with Low Profile Wood Top Cap – Wood/Fabric . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84

. . . . . . . . . . . . . . . . . . . . . . . . . .136

HWN-T

Monolithic Wood Panel with Low Profile Wood Top Cap – Wood . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82

HWPC-T

Panel Accessories – 90° Finish Post — Low Profile Wood Top Cap — Wood Surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .133

HWPS-T

Panel Accessories – 180° Finish Post — Low Profile Wood Top Cap — Wood Surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .134

HWP-T

Monolithic Wood Panel with Low Profile Wood Top Cap – Wood . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82

HWP-T6

Monolithic Wood Panel with Low Profile Wood Top Cap – Wood . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82

JAKA-18

X Series Pedestal Accessories – Worksurface Height Adjustment Kit for Attached Pedestal . . . . . . . . . . . . . . . . . . . . . . . . . . . . .302

JAP-2

Electrical and Cable Management – Power/Data Dome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .172

JAP-4

Electrical and Cable Management – Power/Data Dome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .172

JBCS-0230

X Series Bookcases – Two-High Bookcase . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .329

JBCS-0236

X Series Bookcases – Two-High Bookcase . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .329

JBCS-0242

X Series Bookcases – Two-High Bookcase . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .329

JBCS-0330

X Series Bookcases – Three-High Bookcase . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .329

JBCS-0336

X Series Bookcases – Three-High Bookcase . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .329

JBCS-0342

X Series Bookcases – Three-High Bookcase . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .329

JBCS-0430

X Series Bookcases – Four-High Bookcase . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .330

JBCS-0436

X Series Bookcases – Four-High Bookcase . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .330

JBCS-0442

X Series Bookcases – Four-High Bookcase . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .330

JBCS-0530

X Series Bookcases – Five-High Bookcase . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .330

JBCS-0536

X Series Bookcases – Five-High Bookcase . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .330

JBCS-0542

X Series Bookcases – Five-High Bookcase . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .330

JBDA-6

X Series Pedestal Accessories – Dividers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .302

JBSA

X Series Bookcases – Bookcase Shelf . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .330

JCDA-12

X Series Pedestal Accessories – CD Holder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .302

JCPB-S1A

X Series Combination Units — Attached – Two-High Combination — Attached . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .320

JCPB-SS1

X Series Combination Units —Freestanding – Two-High Combination — Freestanding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .322

JCPE-S1A

X Series Combination Units — Attached – Two-High Combination — Attached . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .320

JCPE-SS1

X Series Combination Units —Freestanding – Two-High Combination — Freestanding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .322

JCPG-S1A

X Series Combination Units — Attached – Two-High Combination — Attached . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .320

JCPG-SS1

X Series Combination Units —Freestanding – Two-High Combination — Freestanding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .322

JCPJ-S1A

X Series Combination Units — Attached – Two-High Combination — Attached . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .320

JCPJ-SS1

X Series Combination Units —Freestanding – Two-High Combination — Freestanding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .322

JCPR-S1

X Series Combination Units —Freestanding – Two-High Combination — Freestanding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .321

JCPR-S1A

X Series Personal Storage Towers with Bookcase — Translucent Door – Two-High Combination — Attached . . . . . . . . . . . .319

JCPT-S1

X Series Combination Units —Freestanding – Two-High Combination — Freestanding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .321

JCPT-S1A

X Series Personal Storage Towers with Bookcase — Translucent Door – Two-High Combination — Attached . . . . . . . . . . . .319

JCPV-SS1

X Series Combination Units —Freestanding – Four-High Combination — Freestanding

JCPV-SS1

X Series Combination Units —Freestanding – Three-High Combination — Freestanding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .323

JCPV-SU3

X Series Combination Units — Translucent Doors – Four-High Combination — Translucent Doors . . . . . . . . . . . . . . . . . . . . . .327

JCPV-SU3

X Series Combination Units — Translucent Doors – Three-High Combination — Translucent Doors . . . . . . . . . . . . . . . . . . . . .324

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .325

April 2008 / USA

391

UniGroup Too Price List

Index

392

Product Code

Product Description

JCPY-SS1

X Series Combination Units —Freestanding – Four-High Combination — Freestanding

Page

JCPY-SU3

X Series Combination Units — Translucent Doors – Four-High Combination — Translucent Doors . . . . . . . . . . . . . . . . . . . . . .327

JCTA-24

X Series Pedestal Accessories – Pedestal Cushion Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .302

JFCA

X Series Lateral File Accessories – Compressor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .309

JFDA-15

X Series Lateral File Accessories – Dividers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .309

JFFA-15

X Series Lateral File Accessories – Front-to-Back Hanging Bars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .309

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .326

JFHA

X Series Lateral File Accessories – Side-to-Side Hanging Bars

JFWA

X Series Lateral File Accessories – Counterweight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .309

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .309

JLPD-S1

X Series Lateral Files — Freestanding – Five-High Lateral File Painted, Painted Perforated or Wood Drawer Fronts . . . . . .307

JLPD-S1

X Series Lateral Files — Freestanding – Four-High Lateral File Painted, Painted Perforated or Wood Drawer Fronts . . . . . .306

JLPD-S1

X Series Lateral Files — Freestanding – Three-High Lateral File Painted, Painted Perforated or Wood Drawer Fronts . . . . .305

JLPD-S1

X Series Lateral Files — Freestanding – Two-High Lateral File Painted, Painted Perforated or Wood Drawer Fronts — Freestanding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .304

JLPD-S1A

X Series Lateral Files — Attached – Two-High Lateral File Painted, Painted Perforated or Wood Drawer Fronts — Attached .303

JLPS-S1

X Series Lateral Files — Freestanding – Five-High Lateral File Painted, Painted Perforated or Wood Drawer Fronts — with Swing Doors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .308

JPAH-24

X Series Attached Pedestals – Box/Box/File — Attached . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .299

JPAJ-24

X Series Attached Pedestals – File/File — Attached . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .299

JPHA-24

X Series Suspended Pedestals – Box/File — Suspended . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .300

JPHH-24

X Series Suspended Pedestals – Box/Box/File— Suspended . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .300

JPHJ-24

X Series Suspended Pedestals – File/File— Suspended

JPMA-24

X Series Mobile Pedestals – Box/File — Mobile

JPMH-24

X Series Mobile Pedestals – Box/Box/File— Mobile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .301

JPMJ-24

X Series Mobile Pedestals – File/File — Mobile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .301

JPTA-6

X Series Pedestal Accessories – Pencil Tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .302

JSCK-18

X Series Pedestal Accessories – Stationary Pedestal Conversion Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .302

JSHA-1

X Series Combination Unit Accessories – Worksurface Height Adjustment Kit for Attached Combination Unit . . . . . . . . . . . . .328

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .300

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .301

JSSA

X Series Combination Unit Accessories – Storage Shelves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .328

JSSA-15

X Series Combination Unit Accessories – Storage Shelf . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .328

JTBB-5124

X Series Personal Storage Towers with Bookcase – Four-High with Bookcase

JTBB-5124-SU3

X Series Personal Storage Towers with Bookcase — Translucent Door – Four-High with Bookcase — Translucent Door . .312

JTBB-6324

X Series Personal Storage Towers with Bookcase – Five-High with Bookcase Upper Storage . . . . . . . . . . . . . . . . . . . . . . . . . . .317

JTBB-6324-SU3

X Series Personal Storage Towers with Bookcase — Translucent Door – Five-High with Bookcase Upper Storage — Translucent Door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .318

JTBB-7324-SU3

X Series Personal Storage Towers with Bookcase — Translucent Door – Six-High with Bookcase Upper Storage — Translucent Door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .318

JTBJ-5124

X Series Personal Storage Towers with Bookcase – Four-High with Bookcase

JTBJ-5124-SU3

X Series Personal Storage Towers with Bookcase — Translucent Door – Four-High with Bookcase — Translucent Door . .312

JTBJ-6324

X Series Personal Storage Towers with Bookcase – Five-High with Bookcase Upper Storage . . . . . . . . . . . . . . . . . . . . . . . . . . .317

JTBJ-6324-SU3

X Series Personal Storage Towers with Bookcase — Translucent Door – Five-High with Bookcase Upper Storage — Translucent Door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .318

JTBJ-7324-SU3

X Series Personal Storage Towers with Bookcase — Translucent Door – Six-High with Bookcase Upper Storage — Translucent Door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .318

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .316

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .316

JTHB-5124

X Series Personal Storage Towers with Upper Storage – Four-High with Hinged Door Upper Storage . . . . . . . . . . . . . . . . . . .310

JTHB-5124-SU3

X Series Personal Storage Towers with Upper Storage — Translucent Doors – Four-High with Hinged Door Upper Storage — Translucent Doors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .311

JTHB-6324

X Series Personal Storage Towers with Upper Storage – Five-High with Hinged Door Upper Storage . . . . . . . . . . . . . . . . . . . .313

JTHB-6324-SU3

X Series Personal Storage Towers with Upper Storage — Translucent Doors – Five-High with Hinged Door Upper Storage — Translucent Doors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .315

JTHG-6324

X Series Personal Storage Towers with Upper Storage – Five-High with Hinged Door Upper Storage . . . . . . . . . . . . . . . . . . . .313

JTHG-6324-SU3

X Series Personal Storage Towers with Upper Storage — Translucent Doors – Five-High with Hinged Door Upper Storage — Translucent Doors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .315

JTHH-6324

X Series Personal Storage Towers with Upper Storage – Five-High with Hinged Door Upper Storage . . . . . . . . . . . . . . . . . . . .313

JTHH-6324-SU3

X Series Personal Storage Towers with Upper Storage — Translucent Doors – Five-High with Hinged Door Upper Storage — Translucent Doors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .315

April 2008 / USA

UniGroup Too Price List

Index

Product Code

Product Description

JTHJ-5124

X Series Personal Storage Towers with Upper Storage – Four-High with Hinged Door Upper Storage . . . . . . . . . . . . . . . . . . .310

Page

JTHJ-5124-SU3

X Series Personal Storage Towers with Upper Storage — Translucent Doors – Four-High with Hinged Door Upper Storage — Translucent Doors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .311

KUAF

Wall Mount Components – Tackboard Wall Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .275

KUC1-0000

Worksurface Accessories – Monitor Arm − Single . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .263

KUC2-0000-H

Worksurface Accessories – Monitor Arm − Dual or Triple . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .263

KUC3-0000-H

Worksurface Accessories – Monitor Arm − Dual or Triple . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .263

KUDP-2420

Worksurface Accessories – Pencil + Drawer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .257

LBA

950 Series File Accessories – Lateral File Lockbar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .365

LBJ1

Lighting – BRAZO™ – Lighting –BRAZO™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .295

LDV

950 Series File Accessories – Dividers

(Left-hand swing)

Doors with Radius Steel Top Cap – Single Door — Laminate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68

LFRS-LD0H

950 Series Lateral Files – Freestanding – Five-High . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .361

LFRS-LD0H

950 Series Lateral Files – Freestanding – Four-High . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .360

LFRS-LD0H

950 Series Lateral Files – Freestanding – Three-High . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .360

LFRS-LD0H

950 Series Lateral Files – Freestanding – Two-High . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .359

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .364

LFRS-LDCH

950 Series Lateral Files – Freestanding – Two-High With Counterweight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .359

LFRS-LR0H

950 Series Lateral Files – Freestanding, Receding Doors, Roll-Out Shelves – Two-High . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .362

LFRS-LRCH

950 Series Lateral Files – Freestanding, Receding Doors, Roll-Out Shelves – Two-High With Counterweight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .362

LFSS-LD0H

950 Series Lateral Files – Freestanding – Five-High . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .361

LFSS-LD0H

950 Series Lateral Files – Freestanding – Four-High . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .360

LFSS-LD0H

950 Series Lateral Files – Freestanding – Three-High . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .360

LFSS-LD0H

950 Series Lateral Files – Freestanding – Two-High . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .359

LFSS-LDCH

950 Series Lateral Files – Freestanding – Two-High With Counterweight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .359

LFSS-LR0H

950 Series Lateral Files – Freestanding, Receding Doors, Roll-Out Shelves – Two-High . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .362

LFSS-LRCH

950 Series Lateral Files – Freestanding, Receding Doors, Roll-Out Shelves – Two-High With Counterweight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .362

LTBL

950 Series Personal Storage Tower – Side Bookcase . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .357

LTBL

950 Series Personal Storage Tower – Side Bookcase . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .358

LTHL

950 Series Personal Storage Tower – Hinged Door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .357

LTHL

950 Series Personal Storage Tower – Hinged Door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .358

LTTT-2424

950 Series Personal Storage Tower – Translucent Tower Top . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .358

LUTD

Task Lighting – Adaptable Electronic Ballast Task Light (Add-On Light) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .277

LUTR

Task Lighting – Adaptable Electronic Ballast Task Light (Starter Light) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .277

LUTS-16UEP

Lighting – BRAZO™ – Adaptable Electronic Ballast Task Light . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .295

LUTS-16UEP

Task Lighting – Adaptable Electronic Ballast Task Light . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .276

MAC-0001

Worksurface Accessories – Make-A-Corner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .254

MEAM

Markerboards/Wall Accessory Slat Pad – Markerboard — Non-Magnetic Surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .280

MSC

Panel Accessories – Muntin Kit — Classic — Painted . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .131

MSC

Panel Accessories – Painted Muntin Kit — Classic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71

MSH

Panel Accessories – Muntin Kit — Horizontal — Painted . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .131

MSH

Panel Accessories – Painted Muntin Kit — Horizontal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71

NADR-8

Shelf Accessories – Adaptable/OneTouch Shelf Dividers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .273

NCL

Worksurface Supports – Straight Leg Basic with Caster . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .252

NEP-1

Electrical and Cable Management – Power Breaker Marker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .159

NOB-1

OneTouch Overhead Storage Unit – OneTouch Gang Clip

NUB-1

Adaptable Upper Storage – Overhead Storage Unit / Shelf Gang Clip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .264

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .269

PCC-180-B

Panel Accessories – 180° Power Connector Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .75

PCC-180-B

Panel Accessories – 180° Power Connector Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .135

PCC-90-B

Panel Accessories – 90° Power Connector Cover — Radius Profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73

PCC-90-B

Panel Accessories – 90° Power Connector Cover — Radius Profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .134

PCCW-2

Panel Accessories – 90° Top Cap for 2-Way and 3-Way — Radius Wood Top Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77

PCE-BL

Electrical and Cable Management – Extended Power Connector — Long Width . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .164

PCE-BM

Electrical and Cable Management – Extended Power Connector — Medium Width . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .164

April 2008 / USA

393

UniGroup Too Price List

Index

394

Product Code

Product Description

PCE-BS

Electrical and Cable Management – Extended Power Connector — Short Width . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .164

Page

PCF-3-B

Electrical and Cable Management – Flexible Power Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .163

PCKB

950 Series Pedestal Conversion Kits – Attached Conversion Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .353

PCKF

950 Series Pedestal Conversion Kits – Freestanding Conversion Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .353

PCKM

950 Series Pedestal Conversion Kits – Mobile Conversion Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .354

PCKS

950 Series Pedestal Conversion Kits – Freestanding Base Conversion Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .341

PCKS

950 Series Pedestal Conversion Kits – Freestanding Base Conversion Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .355

PCKX

950 Series Pedestal Conversion Kits – Attached Base Conversion Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .353

PCOF-1-B

Electrical and Cable Management – Connector Assembly — 12′′ Pass-Through . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .163

PCSS-3-B

Electrical and Cable Management – Straight-Span Power Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .163

PCSW-2

Panel Accessories – 90° Top Cap for 2-Way and 3-Way — Radius Wood Top Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77

PCWW-10

950 Series Pedestal Conversion Kits – Counterweight

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .341

PCWW-10

950 Series Pedestal Conversion Kits – Counterweight

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .355

PCWW-15

950 Series Pedestal Conversion Kits – Heavy Loading Counterweight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .341

PCWW-15

950 Series Pedestal Conversion Kits – Heavy Loading Counterweight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .355

PDF-D

950 Series Freestanding Pedestals – Freestanding Pedestal— Pencil/Box/File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .351

PDF-G

950 Series Freestanding Pedestals – Freestanding Pedestal — Pencil/Pencil/Box/File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .351

PDF-H

950 Series Freestanding Pedestals – Freestanding Pedestal — Box/Box/File

PDF-J

950 Series Freestanding Pedestals – Freestanding Pedestal— File/File

PDF-K

950 Series Freestanding Pedestals – Freestanding Pedestal —Pencil/Box/EDP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .352

PDM-D

950 Series Mobile Pedestals – Mobile Pedestal — Pencil/Box/File

PDM-G

950 Series Mobile Pedestals – Mobile Pedestal — Pencil/Pencil/Box/File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .349

PDM-H

950 Series Mobile Pedestals – Mobile Pedestal — Box/Box/File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .349

PDM-J

950 Series Mobile Pedestals – Mobile Pedestal — File/File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .350

PDM-K

950 Series Mobile Pedestals – Mobile Pedestal — Pencil/Box/EDP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .350

PDS-A

950 Series Suspended Pedestals – Suspended Pedestal — Box/File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .342

PDS-B

950 Series Suspended Pedestals – Suspended Pedestal —Box/Box/Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .342

PDS-D

950 Series Suspended Pedestals – Suspended Pedestal —Pencil/Box/File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .343

PDS-G

950 Series Suspended Pedestals – Suspended Pedestal —Pencil/Pencil/Box/File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .343

PDS-H

950 Series Suspended Pedestals – Suspended Pedestal —Box/Box/File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .344

PDS-J

950 Series Suspended Pedestals – Suspended Pedestal — File/File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .344

PDS-K

950 Series Suspended Pedestals – Suspended Pedestal —Pencil/Box/EDP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .345

PDX-G

950 Series Attached Pedestals — Systems Application – Attached Pedestal — Pencil/Pencil/Box/File . . . . . . . . . . . . . . . . . . .346

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .351

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .352

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .349

PDX-H

950 Series Attached Pedestals — Systems Application – Attached Pedestal — Box/Box/File . . . . . . . . . . . . . . . . . . . . . . . . . . .346

PDX-I

950 Series Attached Pedestals — Systems Application – Attached Pedestal —Box/Box/Box/Box . . . . . . . . . . . . . . . . . . . . . . . .347

PDX-J

950 Series Attached Pedestals — Systems Application – Attached Drawer Pedestal — File/File

PDX-K

950 Series Attached Pedestals — Systems Application – Attached Drawer Pedestal — Pencil/Box/EDP . . . . . . . . . . . . . . . . .348

PFWC-B

Panel Accessories – 90° Finish Post — Radius Wood Top Cap— Fabric Surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73

PFWS-B

Panel Accessories – 180° Finish Post — Radius Wood Top Cap — Fabric Surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .75

. . . . . . . . . . . . . . . . . . . . . . . .347

PLCK

950 Series Pedestal Accessories – Pedestal Drawer Lock Conversion Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .356

PMCC-2

950 Series Pedestal Conversion Kits – Mobile Caster Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .341

PMCC-2

950 Series Pedestal Conversion Kits – Mobile Caster Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .355

PMDF

Task Organization – Diagonal Unit — Freestanding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .293

PMDU

Task Organization – Diagonal Unit — Suspended

PMHF

Task Organization – Horizontal Unit — Freestanding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .294

PMHU

Task Organization – Horizontal Unit — Suspended . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .293

PMMB

Task Organization – Paper Management Mounting Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .293

PMTP-11

Task Organization – Paper Management Tray Packages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .294

PMTP-13

Task Organization – Paper Management Tray Packages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .294

PMTP-6

Task Organization – Paper Management Tray Packages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .294

PMVF-6

Task Organization – Vertical Unit — Freestanding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .294

PMVU-6

Task Organization – Vertical Unit — Suspended . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .294

PPC-180-B

Panel Accessories – 180° Power Connector Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33

April 2008 / USA

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .293

UniGroup Too Price List

Index

Product Code

Product Description

PPD-18

Worksurface Accessories – Pencil Drawer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .257

Page

PPDD-6

950 Series Pedestal Accessories – Side-to-Side 6′′(152mm) Drawer Divider . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .356

PPT-3

950 Series Pedestal Accessories – Pencil Tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .356

PR-1

Worksurface Accessories – Palm Rest . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .261

PRCN-B

Electrical and Cable Management – Ported Raceway Covers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .160

PRCP-B

Electrical and Cable Management – Ported Raceway Covers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .160

PRD-1-C

Electrical and Cable Management – Power Receptacle — Duplex . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .161

PRD-3-B

Electrical and Cable Management – Power Receptacles

PRDI-1-C

Electrical and Cable Management – Power Receptacle — Isolated Ground Duplex . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .161

PRDI-5-B

Electrical and Cable Management – Power Receptacles

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .158

PRS-2-B

Electrical and Cable Management – Power Receptacles

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .158

PRSI-2-B

Electrical and Cable Management – Power Receptacles

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .158

PRT-1

950 Series Pedestal Accessories – Reference Tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .356

PSO-6

950 Series Pedestal Accessories – Stationery Organizer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .356

PSOD-6

950 Series Pedestal Accessories – Stationery Organizer Divider . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .356

RKN-B

Electrical and Cable Management – Raceway Retrofit Kits — 3-Circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .159

RKP-6

Electrical and Cable Management – Raceway Retrofit Kits — Powered — 6-Circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .159

RKP-B

Electrical and Cable Management – Raceway Retrofit Kits — 3-Circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .159

RKP-C

Electrical and Cable Management – Dual Power Access Raceway Kit — 4′′-High Base Raceway . . . . . . . . . . . . . . . . . . . . . . .161

SCD-19

Worksurface Accessories – Steel Center Drawer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .257

SD-12

Shelf Accessories – UniGroup/PLACES Shelf Dividers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .273

SL

UniGroup Shelves and Flipper Doors – Low Shelf

SPCL-1613

Clerestory Kits – 2-Way Connector Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .145

SPCL-1614

Clerestory Kits – 3-Way Connector Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .145

SPCL-1615

Clerestory Kits – 4-Way Connector Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .145

SPCL-1616

Clerestory Kits – Straight Track Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .145

SPCL-1622

Clerestory Kits – End Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .145

SPLA-1270

Panel Accessories – 120° Finish Post — Low Profile Steel Top Cap — Fabric Surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .134

SPLA-1524

Panel Accessories – 120° Finish Post — Radius Steel Top Cap — Fabric Surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74

SPLB-2878

Panel Accessories – 120° Finish Post — Radius Steel Top Cap — Fabric Surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74

SR

UniGroup Shelves and Flipper Doors – Regular Shelf . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .270

SRE

Panel Accessories – Side Trim Rail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36, 78

SREH

Panel Accessories – Full Height Side Trim Rail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .158

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .270

SREH

Panel Accessories – Full-Height Side Trim Rails — for use with Add-On Panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .78

TCSW

Panel Accessories – Radius Wood Top Cap Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77

TFM

Electrical and Cable Management – UniGroup Top Feed Module — 6-Circuit 10′ Ceiling Height . . . . . . . . . . . . . . . . . . . . . . . . .149

TFM-B

Electrical and Cable Management – UniGroup Top Feed Module — 3-Circuit 10′ Ceiling Height . . . . . . . . . . . . . . . . . . . . . . . . .148

TFM-X-B

Electrical and Cable Management – UniGroup Top Feed Module — 3-Circuit 12′ Ceiling Height . . . . . . . . . . . . . . . . . . . . . . . . .148

TMKT-B

Panel Accessories – T-Mount Kit — Center and End Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .79

TPC0

Tables – Laminate Oval Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .366

TPCR

Tables – Laminate Rectangular Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .366

TPPR

Tables – Laminate Round Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .366

TPPS

Tables – Laminate Square Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .366

U2FA

Panel Accessories – Retrofit Kits – 120° Full-Height Finish Post — Square Painted Top Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41

U2FA-V

Panel Accessories – Retrofit Kits – 120° Variable-Height Finish Post — Square Painted Top Cap . . . . . . . . . . . . . . . . . . . . . . . .41

U2FC

Panel Accessories – Retrofit Kits – 90° Full-Height Finish Post — Square Painted Top Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40

U2FC-V

Panel Accessories – Retrofit Kits – 90° Variable-Height Finish Post — Square Painted Top Cap

U2FS

Panel Accessories – Retrofit Kits – 180° Full-Height Finish Post — Square Painted Top Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42

U2FS-V

Panel Accessories – Retrofit Kits – 180° Variable-Height Finish Post — Square Painted TopCap . . . . . . . . . . . . . . . . . . . . . . . . .43

U2PA

Panel Accessories – Retrofit Kits – 120° Full-Height Finish Post — Square Painted Top Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41

U2PA-V

Panel Accessories – Retrofit Kits – 120° Variable-Height Finish Post — Square Painted Top Cap . . . . . . . . . . . . . . . . . . . . . . . .41

U2PC

Panel Accessories – Retrofit Kits – 90° Full-Height Finish Post — Square Painted Top Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40

U2PC-V

Panel Accessories – Retrofit Kits – 90° Variable-Height Finish Post — Square Painted Top Cap

. . . . . . . . . . . . . . . . . . . . . . . . .40

. . . . . . . . . . . . . . . . . . . . . . . . .40 April 2008 / USA

395

UniGroup Too Price List

Index

396

Product Code

Product Description

U2PS

Panel Accessories – Retrofit Kits – 180° Full-Height Finish Post — Square Painted Top Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42

Page

U2PS-V

Panel Accessories – Retrofit Kits – 180° Variable-Height Finish Post — Square Painted TopCap . . . . . . . . . . . . . . . . . . . . . . . . .43

UEFF-QM

Adaptable Upper Storage – Overhead Storage Unit, Standard Mount — Painted, Translucent or Wood Front . . . . . . . . . . . . .265

UEFS-PM

Adaptable Upper Storage – Overhead Storage Unit, Standard Mount — Painted, Translucent or Wood Front . . . . . . . . . . . . .265

UEFS-WM

Adaptable Upper Storage – Overhead Storage Unit, Standard Mount — Painted, Translucent or Wood Front . . . . . . . . . . . . .265

UEGF-QM

Adaptable Upper Storage – Overhead Storage Unit, Up Mount — Painted, Translucent or Wood Front

. . . . . . . . . . . . . . . . . .266

UEGS-PM

Adaptable Upper Storage – Overhead Storage Unit, Up Mount — Painted, Translucent or Wood Front

. . . . . . . . . . . . . . . . . .266

UEGS-WM

Adaptable Upper Storage – Overhead Storage Unit, Up Mount — Painted, Translucent or Wood Front

. . . . . . . . . . . . . . . . . .266

UESN-PM

Adaptable Upper Storage – Open Shelf, Standard Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .264

UESY-PM

Adaptable Upper Storage – Straight Mini Shelf, Standard Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .267

UESZ-PM

Adaptable Upper Storage – Corner Mini Shelf, Standard Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .267

UUFB-P

Wall Mount Components – Back for Wall Mounted Overhead Storage Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .275

UUFS-PW

Wall Mount Components – Wall Mounted Overhead Storage Unit, Painted or Wood Fronts . . . . . . . . . . . . . . . . . . . . . . . . . . . . .274

UUFS-WW

Wall Mount Components – Wall Mounted Overhead Storage Unit, Painted or Wood Fronts . . . . . . . . . . . . . . . . . . . . . . . . . . . . .274

VLRD-0230

V Series Lateral Files — Freestanding – Two-High — Freestanding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .334

VLRD-0230-A

V Series Lateral Files — Attached – Two-High — Attached . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .333

VLRD-0330

V Series Lateral Files — Freestanding – Three-High — Freestanding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .334

VLRD-0430

V Series Lateral Files — Freestanding – Four-High — Freestanding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .334

VLRD-0530

V Series Lateral Files — Freestanding – Five-High — Freestanding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .334

VPAH-24

V Series Attached and Suspended Pedestals – Box/Box/File – Attached . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .331

VPAJ-24

V Series Attached and Suspended Pedestals – File/File– Attached . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .331

VPHA-24

V Series Attached and Suspended Pedestals – Box/File – Suspended . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .331

VPHH-24

V Series Attached and Suspended Pedestals – Box/Box/File– Suspended . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .331

VPHJ-24

V Series Attached and Suspended Pedestals – File/File– Suspended . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .331

VPL1-12

V Series Mobile Pedestals – Legal Filing Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .332

VPL2-12

V Series Mobile Pedestals – Legal Filing Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .332

VPMA-24

V Series Mobile Pedestals – ox/File– Mobile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .332

VPMH-24

V Series Mobile Pedestals – Box/Box/File– Mobile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .332

VPMJ-24

V Series Mobile Pedestals – File/File– Mobile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .332

WC-17

Electrical and Cable Management – Vertical Wire Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .166

WC-6

Electrical and Cable Management – Vertical Wire Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .166

WK

Panel Accessories – Wainscot Kit Painted Rail — Fabric Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .72, 132

WMK

Panel Accessories – Wall Mount Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37, 79, 142

WMSC

Panel Accessories – Wainscot with Classic Muntins Painted — Rail and Muntins — Fabric Panel . . . . . . . . . . . . . . . . . . . .72, 132

WMSH

Panel Accessories – Wainscot with Horizontal Muntins — Painted Rail and Muntins — Fabric Panel . . . . . . . . . . . . . . . . .72, 132

WT

Panel and Shelf Accessories – Wall Track . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37, 79, 142, 273

WUAC-WSG

Electrical and Cable Management – Worksurface Grommet

WUAC-WSG

Worksurface Accessories – Worksurface Grommet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .254

WUAR

Worksurface Accessories – Worksurface Reinforcement Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .255

WUAW-1500-PNH

Worksurface Accessories – Horizontal Wire Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .254

WUCA

Adaptable Worksurfaces — Laminate – Corner, 90° Straight Front . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .184

WUCA-W

Adaptable Worksurfaces — Wood – Corner, 90° Straight Front . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .222

WUCB-L54

Adaptable Worksurfaces — Laminate – Bent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .207

WUCB-R45

Adaptable Worksurfaces — Laminate – Bent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .207

WUCB-WL54

Adaptable Worksurfaces — Wood – Bent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .242

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .172

WUCB-WR45

Adaptable Worksurfaces — Wood – Bent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .242

WUCC-0004

Worksurface Supports – Support Column . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .252

WUCD

Adaptable Worksurfaces — Laminate – D-Shaped Convergent, Wrap-Around . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .204

WUCD-W

Adaptable Worksurfaces — Wood – D-Shaped Convergent, Wrap-Around . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .240

WUCE-L44

Adaptable Worksurfaces — Laminate – Corner, 90° Wrap-Around Extended . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .192

WUCE-R44

Adaptable Worksurfaces — Laminate – Corner, 90° Wrap-Around Extended . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .192

WUCE-WL44

Adaptable Worksurfaces — Wood – Corner, 90° Wrap-Around Extended . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .230

WUCE-WR44

Adaptable Worksurfaces — Wood – Corner, 90° Wrap-Around Extended . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .230

April 2008 / USA

UniGroup Too Price List

Index

Product Code

Product Description

WUCF-N45

Adaptable Worksurfaces — Laminate – Corner, 90° Angled Transitional . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .190

Page

WUCF-N54

Adaptable Worksurfaces — Laminate – Corner, 90° Angled Transitional . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .190

WUCF-WN45

Adaptable Worksurfaces — Wood – Corner, 90° Angled Transitional . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .228

WUCF-WN54

Adaptable Worksurfaces — Wood – Corner, 90° Angled Transitional . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .228

WUCH-N34

Adaptable Worksurfaces — Laminate – Corner, 90° Notched Transitional . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .189

WUCH-N43

Adaptable Worksurfaces — Laminate – Corner, 90° Notched Transitional . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .189

WUCH-WN34

Adaptable Worksurfaces — Wood – Corner, 90° Notched Transitional . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .227

WUCH-WN43

Adaptable Worksurfaces — Wood – Corner, 90° Notched Transitional . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .227

WUCK

Adaptable Worksurfaces — Laminate – Corner, 90° Split Top . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .191

WUCK-W

Adaptable Worksurfaces — Wood – Corner, 90° Split Top . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .229

WUCL-0001

Worksurface Supports – Straight Leg Basic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .252

WUCN

Adaptable Worksurfaces — Laminate – Corner, 90° Notched . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .186

WUCN-W

Adaptable Worksurfaces — Wood – Corner, 90° Notched . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .224

WUCP-L44

Adaptable Worksurfaces — Laminate – Corner, 90° Notched Extended . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .194

WUCP-R44

Adaptable Worksurfaces — Laminate – Corner, 90° Notched Extended . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .194

WUCP-WL44

Adaptable Worksurfaces — Wood – Corner, 90° Notched Extended . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .232

WUCP-WR44

Adaptable Worksurfaces — Wood – Corner, 90° Notched Extended . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .232

WUCQ-N44

Adaptable Worksurfaces — Laminate – 90° Merger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .199

WUCQ-WN44

Adaptable Worksurfaces — Wood – 90° Merger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .236

WUCR

Adaptable Worksurfaces — Laminate – Corner, 90° Wrap-Around . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .185

WUCR-W

Adaptable Worksurfaces — Wood – Corner, 90° Wrap-Around . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .223

WUCT-N34

Adaptable Worksurfaces — Laminate – Corner, 90° Wrap-Around Transitional . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .188

WUCT-N43

Adaptable Worksurfaces — Laminate – Corner, 90° Wrap-Around Transitional . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .188

WUCT-WN34

Adaptable Worksurfaces — Wood – Corner, 90° Wrap-Around Transitional . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .226

WUCT-WN43

Adaptable Worksurfaces — Wood – Corner, 90° Wrap-Around Transitional . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .226

WUCU

Adaptable Worksurfaces — Laminate – Corner, 90° Angled

WUCU-W

Adaptable Worksurfaces — Wood – Corner, 90° Angled . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .225

WUCX-L43

Adaptable Worksurfaces — Laminate – Corner, 90° Wrap-Around Transitional Extended . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .196

WUCX-R34

Adaptable Worksurfaces — Laminate – Corner, 90° Wrap-Around Transitional Extended . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .196

WUCX-WL43

Adaptable Worksurfaces — Wood – Corner, 90° Wrap-Around Transitional Extended . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .234

WUCX-WR34

Adaptable Worksurfaces — Wood – Corner, 90° Wrap-Around Transitional Extended . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .234

WUCZ-N44

Adaptable Worksurfaces — Laminate – Corner, 120° Wrap-Around . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .200

WUCZ-WN44

Adaptable Worksurfaces — Wood – Corner, 120° Wrap-Around

WUDC-3830

Adaptable Worksurfaces — Laminate – Conference End . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .209

WUDC-3830-W

Adaptable Worksurfaces — Wood – Conference End . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .244

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .187

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .237

WUDC-5030

Adaptable Worksurfaces — Laminate – Conference End . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .209

WUDC-5030-W

Adaptable Worksurfaces — Wood – Conference End . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .244

WUDC-6230

Adaptable Worksurfaces — Laminate – Conference End . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .209

WUDC-6230-W

Adaptable Worksurfaces — Wood – Conference End . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .244

WUDD

Adaptable Worksurfaces — Laminate – D-Shaped Ender . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .206

WUDD-W

Adaptable Worksurfaces — Wood – D-Shaped Ender . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .241

WUDZ

Adaptable Worksurfaces — Laminate – 120° Link

WUDZ-W

Adaptable Worksurfaces — Wood – 120° Link . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .246

WURA

Adaptable Worksurfaces — Laminate – Rectangular . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .174

WURA-W

Adaptable Worksurfaces — Wood – Rectangular . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .212

WURD

Adaptable Worksurfaces — Laminate – D-Shaped Convergent

WURD-W

Adaptable Worksurfaces — Wood – D-Shaped Convergent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .238

WURE-N34

Adaptable Worksurfaces — Laminate – Wedge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .181

WURE-N43

Adaptable Worksurfaces — Laminate – Wedge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .181

WURE-WN34

Adaptable Worksurfaces — Wood – Wedge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .219

WURE-WN43

Adaptable Worksurfaces — Wood – Wedge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .219

WURK

Adaptable Worksurfaces — Laminate – Rectangular — Split Top

WURK-W

Adaptable Worksurfaces — Wood – Rectangular — Split Top . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .221

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .211

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .201

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .183

April 2008 / USA

397

UniGroup Too Price List

Index

398

Product Code

Product Description

WURR

Adaptable Worksurfaces — Laminate – Rectangular Radius End . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .182

Page

WURR-W

Adaptable Worksurfaces — Wood – Rectangular Radius End . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .220

WURS

Adaptable Worksurfaces — Laminate – Rectangular Swell . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .178

WURS-W

Adaptable Worksurfaces — Wood – Rectangular Swell . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .216

WURT-N34

Adaptable Worksurfaces — Laminate – Rectangular Transition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .180

WURT-N43

Adaptable Worksurfaces — Laminate – Rectangular Transition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .180

WURT-WN34

Adaptable Worksurfaces — Wood – Rectangular Transition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .218

WURT-WN43

Adaptable Worksurfaces — Wood – Rectangular Transition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .218

WURV

Adaptable Worksurfaces — Laminate – Rectangular Convergent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .202

WURV-W

Adaptable Worksurfaces — Wood – Rectangular Convergent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .239

WURW

Adaptable Worksurfaces — Laminate – Rectangular Inverse Swell . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .179

WURW-W

Adaptable Worksurfaces — Wood – Rectangular Inverse Swell . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .217

WURY

Adaptable Worksurfaces — Laminate – Rectangular Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .177

WURY-3830

Adaptable Worksurfaces — Laminate – Key Conference End . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .210

WURY-3830-W

Adaptable Worksurfaces — Wood – Key Conference End . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .245

WURY-5030

Adaptable Worksurfaces — Laminate – Key Conference End . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .210

WURY-5030-W

Adaptable Worksurfaces — Wood – Key Conference End . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .245

WURY-5036

Adaptable Worksurfaces — Laminate – Key Conference End . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .210

WURY-5036-W

Adaptable Worksurfaces — Wood – Key Conference End . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .245

WURY-6236

Adaptable Worksurfaces — Laminate – Key Conference End . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .210

WURY-6236-W

Adaptable Worksurfaces — Wood – Key Conference End . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .245

WURY-6242

Adaptable Worksurfaces — Laminate – Key Conference End . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .210

WURY-6242-W

Adaptable Worksurfaces — Wood – Key Conference End . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .245

WURY-6248

Adaptable Worksurfaces — Laminate – Key Conference End . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .210

WURY-6248-W

Adaptable Worksurfaces — Wood – Key Conference End . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .245

WURY-W

Adaptable Worksurfaces — Wood – Rectangular Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .215

WUTS

Adaptable Worksurfaces — Laminate – Countertop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .208

WUTS-W

Adaptable Worksurfaces — Wood – Countertop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .243

Z2BT-0000

Worksurface Supports – Counter Top Brackets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .250

ZEBA-0000

Worksurface Supports – Side Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .250

ZEBC-1200

Worksurface Supports – Standard Snap-n-Fit Mini Cantilever Bracket for Corner Worksurface . . . . . . . . . . . . . . . . . . . . . . . . . .249

ZEBC-1900

Worksurface Supports – Standard Snap-n-Fit Cantilever Bracket for Corner Worksurface

ZEBD-1000

Worksurface Supports – Standard Mini Cantilever Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .247

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .249

ZEBD-1600

Worksurface Supports – Standard Cantilever Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .247

ZEBL-1600

Worksurface Supports – Standard Link Cantilever Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .247

ZEBN-0000

Adaptable Worksurface Supports – Pedestal-to-Panel Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .251

ZEBR-0000

Worksurface Supports – Rear-Corner Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .250

ZEBS-1200

Worksurface Supports – Standard Snap-n-Fit Mini Cantilever Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .248

ZEBS-1900

Worksurface Supports – Standard Snap-n-Fit Cantilever Bracket for Rectangular Worksurfaces . . . . . . . . . . . . . . . . . . . . . . . . .248

ZEBT-0000

Worksurface Supports – Counter Top Brackets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .250

ZEBV-0000

Worksurface Supports – Convergent Mount Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .250

ZEFS-LNE

Adaptable Worksurface Supports – Worksurface Support Panel — Laminate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .251

ZEFS-WNE

Adaptable Worksurface Supports – Worksurface Support Panel — Wood . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .251

ZHBT-0000

Worksurface Supports – Counter Top Brackets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .250

ZUBF-0000

Worksurface Supports – Flush Mount Plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .250

ZUBW-PN

Wall Mount Components – Worksurface/Worksurface Support Panel to Wall Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .275

ZUFJ-0101-PNFG

Worksurface Accessories – Single Support Leg

ZZFJ

Worksurface Accessories – Support Post . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .253

ZZFK

Worksurface Accessories – Double Support Leg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .253

ZZFZ-2121-PNF

Worksurface Supports – Adjustable Height Disc Base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .252

April 2008 / USA

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .253

UniGroup Too Price List

Product Non-Obsolescence and Warranty Policy

(This Haworth Product Non-Obsolescence and Warranty Policy applies to products manufactured after January 1, 2006) Haworth, Inc., Haworth, Ltd. or Haworth AI, LLC (each called ‘‘Haworth’’) will make a good faith effort to maintain product compatibility within our various generations of product platforms to provide our customers with spaces that adapt to change. Haworth’s non-obsolescence policy commits to provide our customers with products of comparable function or operational characteristics for a term equal to the warranty period. Haworth fabrics and finishes must be updated periodically to maintain the market appeal of our products and respond to the demands and changing preferences of our customers. As a result some fabrics and finishes are periodically discontinued. If a new product purchased or leased from Haworth or from an authorized Haworth dealer proves to be defective (as defined below) while the product is still owned or leased by the initial purchaser or lessee and if the initial purchaser or lessee gives Haworth written notice of the defect within the Applicable Warranty Period, then, except as provided below, Haworth will, at Haworth’s option, either repair or replace the product, at Haworth’s expense, or refund to the buyer the purchase price of the product. A notice must be addressed to Haworth at One Haworth Center, Holland, Michigan 49423, attention: Corrections Department. Except as provided below, a product shall be considered ‘‘defective’’ if Haworth finds that it is defective in materials or workmanship and if the defect materially impairs the value of the product to the buyer or lessee. Applicable Warranty Periods are set forth below. Each Applicable Warranty Period begins on the day the product is manufactured, except that the Applicable Warranty Period for a flooring product begins when its installation is complete. If product is not installed by a Haworth Certified installer or reconfigured by a Haworth trained installer, Haworth may not consider the product to be defective and will not repair, replace or refund its price.

Applicable Product(s)

Warranty Period

All Haworth products except those listed below

LIFETIME

Electrical components, electrical accessories and fixed task lighting, excluding underfloor power; seating mechanisms*, excluding mechanisms in wood or wood framed chairs; seating glides and casters, stack chair frames, wall products; Paradocs storage; if high performance edge worktops

Ten Years

All Haworth products that are at any time used in a classroom or educational environment (other than administrative areas), except products listed below

Ten Years

Wood or wood framed products and wood chairs including their mechanisms; gel arm caps; fabric scrims and fabrics rated ( A ) Heavy Duty under Association of Contract Textiles guidelines; Cabriolet; user-adjustable worksurface mechanisms; thermofused laminates; slow close mechanisms; ambient and flexible task lighting; and Jump Stuff products other than Boogie Board (lifetime)

Five Years

All flooring products, including underfloor power, other than factory-applied surfaces; plastic ultraviolet light color fastness; fabrics rated ( a ) General Contract under the Association of Contract Textiles guidelines *

Three Years

Non-standard Specials products; Crossings products with Texon T-90 material; soft palm rest; mouse pad insert; Pelican Drawer; translucent edge marring; products that are manufactured outside North America and sold into the North American market; factory-applied surfaces on flooring products

One Year

* The Applicable Warranty Period for these products is single shift forty hour week. If the chair is used more than this, then the Applicable Warranty Period will be reduced in proportion to the increased usage. For example, if the chair is used an average of sixty hours per week, then the Applicable Warranty Period for the fabric will be two years and the seating mechanisms six years, eight months. A product will not be considered to be defective, and Haworth will not repair, replace or refund its price if the product (1) is a consumable product, such as a lamp, light ballast or surge suppression product, (2) is ‘‘Customer’s Own Material’’ (i.e. material specified by the buyer or lessee that is not a standard Haworth product offering), (3) is not installed and used as recommended in Haworth’s written planning, installation and user guides, (4) has been otherwise misused or suffered abusive damage or (5) is a product that is manufactured by a third-party supplier from whom Haworth purchases it and then re-sells it without incorporating it in other Haworth products (in which case Haworth will assign to the buyer or lessee any assignable warranty that the manufacturer gives to Haworth). A defect in materials or workmanship does not include (a) normal wear and tear, (b) damage caused by an Act of God or by transportation, reconfiguration or other movement of the product, (c) a product alteration made without Haworth’s express written authorization, (d) a natural variation occurring in wood, marble or leather or (e) failure of the color, grain or texture of wood, marble, leather or fabric to match or be colorfast. EXCEPT AS STATED ABOVE, HAWORTH DOES NOT MAKE ANY WARRANTY AS TO ANY PRODUCT AND, IN PARTICULAR, DOES NOT MAKE ANY WARRANTY OF MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE. Product repair or replacement or refund of the price, at Haworth’s option, in accordance with this Policy, is the buyer’s or lessee’s exclusive remedy for a product defect. Haworth shall not have tort liability with respect to a product, and Haworth shall not be liable for any consequential, economic, indirect, special, punitive or incidental damages arising from a product defect. Issue Date: November 14, 2005

For more information call 800.344.2600 or 616.393.3000. Amsterdam Bangalore Barcelona Beijing Bologna Brussels Budapest Calgary Chicago Dallas Dubai Frankfurt

Guatemala City Geneva Holland, MI Hong Kong Kuala Lumpur Lisbon London Los Angeles Madrid Melbourne Milan Mexico City Mumbai

New Delhi New York Paris Pune Shanghai Singapore Stuttgart Sydney Tokyo Warsaw Washington DC Zurich

Haworth is a registered trademark of Haworth, Inc. ©Haworth, Inc. 2008 04.08 haworth.com | haworth-europe.com | haworth-asia.com