Trinitron\" Color TV Download
Short Description
Download Trinitron" Color TV Download ...
Description
Trinitron" Color TV Operating
Instructions
KV-27S22 KV-27V22 KV-29PS2 KV-29RS22 KV-29RS22C KV-29SD2 KV-29V22M KV-32S22 © 1997 by SonyCorporation
NARNING
CAUTION
"o prevent fire or shock hazard, do not expose the TV o rain or moisture,'
When
using
TV games,
computers,
pattern a high
is left
on the
brightness
screen
for long
or contrast
permanently imprinted onto watching the same program station imprints
ATTENTION RISQUE
DE CHOC ELECTRIQUE, NE PAS OUVRIR
PRECAUCION RIESGO
DE CHOQUE ELECTRICO NO ABRIFI
they
DO NOT REMOVE COVER (OR BACK).
similar
products
Note
Iogos
onto
the
periods the
of time
image
ran
at be
the screen. Continuously can cause the imprint of
TV screen.
are not covered
are the result
setting,
by your
These
types
warranty
of
because
of misuse.
on Caption
Vision
This television receiver provides display of televbion dosed captioning in accordance with §15.119 of the FCC rules. Note
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
and
with your TV, keep the brightness and contrast functions at low settings. If a fixed (non-moving)
on cleaning
the
TV
Clean the TV with a soft dry cloth. Never use strong solvents such as thinner or benzine, which might damage the finish of the cabinet.
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference with radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antennas. • Increase the separation between the equipment end receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help.
NO USER-SERVICEABLE PARTS INSIDE. REFERSERVICING TO QUALIFIED SERVICE PERSONNEL.
This symbol is intended to alert the user to the presence of untnsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
Note
to CATV
system
installer
This reminder is provided to call the CATV system installer's attention to Artide 820-40 of the NEC that provides guidelines for proper grounding and, In particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical. Use of this television receiver for other than private viewing of programs broadcast on UHF or VHF or transmitted by cable companies for the use of the general public may require authorization from the broedcaster/cable company and/or program owner.
CAUTION
NOTIFICATION
TO PREVENTELECTRICSHOCK, DO NOT USETHIS POLARIZEDAC PLUGWITH AN EXTENSIONCORD, RECEFTACLE, OR OTHER OUTLETUNLESSTHE BLADESCAN BE FULLYINSERTEDTO PREVENT BLADEEXPOSURE.
This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
modifications not expressly approved in this void that your any authority to or operate this I manual You are could cautioned changes equipment. This document is for the remote control RM-Y13SA. MODELS: KV-27S22, 27V22, 29PS2, 29RS22, 29RS22C, 2951)2, 29V22M, 32S22
I I
Jr Remote Control
In the instructions that follow, we will refer to the buttons on your remote control. Keep this flap unfolded and look to this page for reference.
MUTING
to know control
@eo
® ®-L®
TV/VIDEO ANT (page 11)
presented in different colors to represent available functions. Button
RESET (page 13 and 14) VOL +/CODE SET (page 18 and 20)
ENTER
.........
Green ...............
MTS (page 14)/GUIDE Select buttons (page 12) MENU CH +/-
the
color
Transparent
0 - 9 buttons
(_ TV/DBS (page 5)
on the
Names of the buttons on the remote control are
o
JUMP
the buttons
TV (POWER) TV (FUNCTION)
DISPLAY SLEEP
Getting remote
Press to select the component you want to control; e.g. VTR (VCR), DBS (Direct Broadcast Satellite)/CABLE, or "IV. Buttons relevant to power operations, like turning the TV, DBS (Direct Broadcast SateUite)/CABLE, or VTR (VCR) on or off.
Label color White ...............
TV/VTR
Blue .................
Broadcast Satellite)/CABLE operation buttons. DBS (Direct Broadcast Satellite)
(VCR)/DBS
operation
(Direct
buttons.
For a detailed explanation of most buttons, "Watching the TV" on page 10.
see
mm
w Table of Contents
Welcome!
........................................
1
......................................
1
Precautions
Using This Manual Connecting Connector
..........................
and Installing
1
the TV
Types ..........................................
2 2
Connecting a cable box ............................
2
2 2
Connsctingan antenna/cableTVsystem ..........................................
3
Connect_toans Videoequipped VCR ..................................................... 3 Connecting a VCR and "IV with a cable bOX
.,,,,.,....,,,,,,....,,..,......,..
......
°°°.°..°.°°°°°4
Connecting toanSVideoeqm'pped VCR with a cable box ................................. Connecting Conneding Connscfi_ Connecting
21
InseKmgbatteries........................................... 8
Specifications ................................
23
Using the remote control Select buttons .......8
Index ..............................................
24
Using your New TV
Owner's Record
Settingup the'IV automatically....................9
The model and serial numbers are Io¢ated at the rear of the W, below the Sony logo, on the stkker, end also on the TV box (white label). Record the_ numbers in the spaces provided below. Refer to them whenever you call upon your Sony dealer regarding this product.
Watchingthe "IV.......................................... 10 Adjusting
your SET UP (menus)
Learning menu selection ..............................
12
Using the VIDEO menu ...............................
13
Using the AUDIO menu ..............................
14
Using the TIMER menu ...............................
15
Using the SET UP menu .............................
16
4
a DBS receiver ...................... 5 a DBS receiver and a VCR .... 5 an a_M.iosystem ................... 6 a camcorder .......................... 6
two vcP,sfortape _iiting using MONITOR our
Troubleshooting ...........................
Adjus_ng sliders ............................................ 8 On LineHelp/Instructions ............................ 8
Making Connections ................................... Connecting directly to cable or an antenna ....................................... Cable or antenna ......................................
withaVCR
Basic Set Up
....................... 7
Operating video equipment Settingthemanufacturer's code...................18 Operating a cable box or DB$ receiver ProgrammL_theremote............................. 20
Model No. serial No.
KV"
E Welcome! Thank you for purchasing the Sony Trinitron ® Color TV. This manual is written for the models 'listed below. Before reading, check the model "humber on the rear of your TV. Model KV-27S22 is used for illustration purposes. The screens displayed are for model KV-29V22M. Differences in operation features are indicated in the text; for example, "KV-27S22 only".
Model Number KV-27S22 k'V-29PS2 KV-29RS22C k'V-29V22M
E Precautions
Jig
Safety
This manual is divided into four major sections. We recommend that you carefully review the contents of each section in the
* Operate the TV only on 120 V AC (except KV-29RS22C).
order provided to ensure understand the operation
. Operate the TV only on 220 V AC (KV-29RS22C only). * The plug is designed, for safety purposes, to fit in the wall outlet only one way. If you are unable to insert the plug fully into the outlet, contact your dealer (except KV-29RS22C). • If any liquid or solid object should fall inside the cabinet, unplug the TV immediately and have it checked by qualified personnel before operating it further. • If you will not be using the TV for several days, disconnect power by pulling the plug itself. Never pull on the cord.
1
Connecting
This section will guide you through your initial set up. It will show you how to connect your new components, connect to your antenna or cable, and connect any accessories. 2 Basic Set Up. This section will teach you the basic skills needed to operate your new TV. It will show you how to operate of the remote control.
3
do not
functions
will show
you how to begin
dust
control's
features.
4 Adjusting your Set Up (menus). This section
the TV in a hot or humid to excessive
special
Using your New W.
to use your remote
place, or in a place subject or mechanical vibration.
the W.
using your new TV. It will show you how to use the AUTO SET UP feature, and how
Installing • To prevent internal heat build-up, block the ventilation openings.
that you fully of your new TV.
and Installing
This section
For details concerning safety precautions, see the supplied leaflet "IMPORTANT SAFEGUARDS".
• Do not install
E Using This Manual
on-screen settings.
will teach you how to access
menus
and adjust your TV's
Instructions in this manual are written for the remote wntrol. Similar controls may befound on the TV console.
__
II Connecting
Connector
and Installing
Connecting antenna
Types
You may find it necessary to use some of the following connector types during set up. Coaxial Cable Standard TV Cable and Antenna connector Plug Type _
(_
Press
onto connection
Screw-onType
•
Audio/Video Cable Conventional Audio/Video _
Making
_
VHF only or
to cable or an
75-ohm coaxial cable
• VHF/UHF
S Video Cable High quality Video connector for enhanced picture quality Alignguidesand pressontoconnection
directly
The connection you choose will depend on the cable found in your home. Newer homes will be equipped with standard coaxial cable (see A); older homes will probably have 300ohm twin lead cable (see B); still other homes may contain both (see C). A
-'_ CI_ Screwontoconnection
-.__)
the TV
(Rear of TV) VHF/UHF
Cable
This is the most simple connection. Connection is made directly from the cable or antenna to the TV.
Connecting
a cable
box
Some pay cable TV systems use scrambled or encoded signals that require a cable box* to view all channels.
or
B
i
Cable
300-ohm twin lead cable
VHF only
Cable
(Rear of TV) VHF/UHF
_ _
or
,N
(Rear of TV) VHF/UHF ox '
OUT
or
cable
• VHF/UHF C
Antenna connector
_
-'---'JJ)-)_=
"%
_ •
UHF
I 300-ohm twin
(Rear of TV)
EAC-66 U/V mixer (not supplied) lead cable
* Your Sony remote control can be programmed to operate your cable box (see page 18). Note:
7S-ohm coaxial cable
VHF
Connections
For best picture quality, a cable TV system or outdoor antenna is recommended.
(Rear of TV) VHF/UHF
Cable
• UHF only
Press onto connection Yellow - Video White - Audio (Left) Red - Audio (Right)
or antenna
• If you will be controlling all channel selections _,. through your cable box, you should consider , using the CHANNEL FIX featurediscussed on page 16.
Disconnect Connecting
1
an antenna/cable
AUDIO/VIDEO
Coaxial cable
connectors,
3
and VIDEO
IN on your
Connecting VCR
_o_
TV
1 '__-_
I I[_1out
-
u_oR,ax0__o
_ _.._
picture
_ao0_
I
._
I
" --_-_" AUDIO-L (white) VIDEO (yellow)
_
_
AUDIO-R (red)
f 2 VMC-810S/820S (not supplied)
on your TV.
to an S Video
(for optimum
any connections.
VCR Ca ble
AUDIO Right).* (Yellow-VIDEO, White-AUDIO Red-on Using a coaxial connector, connectLeft,OUT your VCR to VHF/UHF
making
3
connect AUDIO and VIDEO OUT on your VCR to AUDIO
sources before
(Rear of TV)
Attach the coaxial connector from your cable or antenna to IN on your VCR.
2 Using
all power
TV
equipped
quality)
• KV-27V22, 29V22M, 32S22 only
1
Attach the coaxial connector from your cable or antenna to IN on your VCR.
2
Using AUDIO connectors, connect AUDIO OUT on your VCR to AUDIO IN on your TV (White-AUDIO Left, Red-AUDIO Right).*
3
(Rear of TV)
3
Coaxial cable
Using a coaxial connector, connect OUT on your VCR to VHF/UHF on your TV.
4 Using an S VIDEO connector, connect S VIDEO on your VCR to S VIDEO on
Cable
1_-
/_]o_
_0._0L_o
_._@
VHF/U_
"(_° I
yourTV. *
Ifyou are connecting a monaural VCR, connect only the single audio output to the left input on your TV.
Note on DVD Connection: * For the best picture quality: connect the DVD player directly to the TV. Keter to your DVD manual for detailed connection information.
AUDIO-R (red) AUDIO-L (white) _/_
_
4
(not supplied) YC-15V/30V 1
S VIDEO
f
2
RK-74A (not supplied)
3
_m
i_ _' Connecting
Connecting cable box
and Installing
a VCR and TV with
the TV (continued) Disconnect
a
all power
sources before
making
any connections.
(Rear of TV) Coaxial cable
Connect the single (input) jack of the Splitter to your incoming cable connection, and connect the other two (output) jacks (using coaxial cable) to IN on your cable box and VHF/UHF on your TV.
VCR
2 Using a coaxial connector, connect OUT on your cable box to IN on your VCR. 3 Using AUDIO/VIDEOconnectors, connect AUDIO and VIDEO OUT on your VCR to AUDIO and VIDEO IN on your TV (YellowVIDEO, White-AUDIO Left, Red-AUDIO Right).
Connecting to an S Video VCR with a cable box (for optimum •
KV-27V22, 29V22M,
1-2 3
picture
Perform
]
1 Cable
.I Splitter (not supplied)
OD,O-RCred) !
"o_
VMC-810S/820S
(not supplied)
Cable box
(Rear of TV)
equipped Coaxial cable
quality)
I
VCR
32S22 only
as described
AUDIO-L (white) VIDEO (yellow)
above.
I'_OUT
_UOlO R _01OL VlO_
Using AUDIO connectors, connect AUDIO OUT on your VCR to AUDIO IN on your TV (White-AUDIO Left, Red-AUDIO Right).
4 Using an S Video connector, connect S VIDEO on your VCR to S VIDEO on your TV.
4 Cable
1 4J
2_
_
S VIDEO AUDIO-R (red) AUDIO-L (white) (not supplied) YC-15V/30V
! f
RK-74A (not supplied) Note:
Splitter
• To view s_ambled channels through your cable box, select
(not supplied)
VIDFO 1 by pressing TV/VIDI_O 4
on the remote control.
Cable box
Connecting Satellite)
a DBS (Direct
Disconnect
Broadcast
receiver
all power
2 I
Forthe highestpicturequality,useS VIDEOinsteadof the I yeIIow AUDtO/VIDEO cable. (KV- 27V22, 29V22M, 32S22 I
.,_1 Connect the cable from your satellite antenna to your DBS receiver. 2 Attach the coaxial connector from your cable or antenna to VHF/UHF on your TV. 3 Using AUDIO/VIDEO connectors, connect AUDIO and VIDEO OUT on your DBS receiver to AUDIO and VIDEO IN on your TV.
on_) See your DBS manual for more informatlon.
Satellite antenna cable
I [u__
_
sources before
I L_I ]
Iv,.,.
VIDEO IN
R
/ /
VIDEO (yellow) AUDIO-R (red) AUDIO-L (white)
_ 3_
Connecting a DBS (Direct Broadcast Satellite) receiver and a VCR
any connections.
(Rear of TV)
|
I
making
f VMC-810S/820S
(not supplied)
1 Connect the cable from your satellite 2 3 4
5
antenna to your DBS receiver. Attach the coaxial connector from your cable or antenna to VHF/UHF-IN on your VCR. Using a coaxial connector, connect VHF/UHFOUT on your VCR to VHF/UHF on your TV. Using AUDIO/VIDEO connectors, connect AUDIO and VIDEO OUT on your DBS receiver to AUDIO and VIDEO IN on your VCR. Using AUDIO/VIDEO connectors, connect AUDIO and VIDEO OUT on your VCR to AUDIO and VIDEO IN on your TV.
(not supplied) (Rear of TV)
oBsr-I AUDIO-L (white) AUDIO-R (red) VIDEO (yellow)
Note: • To view input from the DBS or VCR, select VIDEO by pressing TV/VIDEO on the remote control.
1
! _
LV_O I _1
(V.,U',,'_OI.
N_r°
3
5
1 VMC-810S/820S
(not supplied)
5
Connecting Connecting
an audio
and Installing
the TV (continued)
system
Disconnect
all power
sources before
making
any connections.
(Rear of TV)
For greater home |
viewing
stereo
Using
pleasure,
integrate
your VHF/UHF
into the system.
AUDIO
connectors,
connect
(White-AUDIO
Left, Red-AUDIO
Set your stereo
to the chosen
• KV-27V22,
RK-74A (not supplied)
AUDIO
1 AUDIO-R (red)
Line
Right).
_
2
for
/1:
o[11 1
a camcorder 29V22M
This connection picture directly
only
is convenient for viewing from your camcorder.
a
Using AUDIO/VIDEO connectors, connect AUDIO and VIDEO OUT on your camcorder to AUDIO and VIDEO IN on the front panel of your TV (Yellow-VIDEO, White-AUDIO Left, Red-AUDIO Right).
U
U
* If you are connecting a monoaural camcorder, connect only the single audio output to the left input on your TV.
,
vlmEO 2 INPUT
If you have an S video equipped camcorder, you can use an S video connection for optimum picture quality. (KV-27V22, 29V22M only)
w_oN
m
VIDEO (yellow)
(red) (white)
AV output
VMC-810S/820S
Note:
R
_
Line input
and refer to page 14 of this manual additional audio setup instructions.
Connecting
1 AUDIO-L (white)
OUT on your TV to one of the unused Line inputs (e.g. Tape-2, etc.) on your stereo 2
Vl0EO IN
(not supplied)
Disconnect all power sources before making any connections.
Connecting two VCRs for tape °editing using MONITOR OUT
(Rear of TV)
"_ KV-27V22, 29V22M only
MONITOR OUT gives you the ability to use a second VCR to record a program being played by the primary VCR or to perform tape editing and dubbing. 1 Connect the VCR intended for playback using the setup instructions on page 3 of this manual.
2
Using AUDIO/VIDEO connectors, connect AUDIO and VIDEO IN on your VCR intended for recording to MONITOR AUDIO and VIDEO OUT on your TV.
VCR (fo_ Pl0ayback!___
1
_oVCRL(for recordinq)
_
_/_
_/_
i VMC-810S/820S
(not supplied)
VMC-810S/820S
Notes: • Do not change the input signal while editing through MONITOR OUT. • When connecting a single VCR to the TV; if VCR LINE OUT is connected to TV VIDEO IN, do not connect the TV MONITOR OUT jacks to the VCR LINE INPUT (see right). Doing so will cause program interference and other viewing problems.
Indicates direction of signal
AUDIO-/(white) (red)
AUDIO-R 2 _V,DEO(ye,ow) l (not supplied)
_J_
_ Basic Set up
Inserting
batteries
Insert two size AA (R6) batteries (supplied) by matching the + and - on the batteries to the diagram inside the battery compartment.
Using the remote Select buttons
VOL
control
On Line Help/Instructions Several menu windows will provide prompts and instructions to assist you in navigating through the different functions. When presented, use these to supplement the instructions in this manual.
CH
Select
Notes: • Remove the batteries to avoid damage from possible battery leakage whenever you anticipate that the remote control will not be used for an extended period. • Handle
the remote
control
with care.
Avoid dropping it, getting it wet, or placing it in direct sunlight, near a heater, or where the humidity is high. • Your remote control can be programmed to operate most video equipment. See page 18.
The supplied remote buttons which allow
control has select for movement of the on-
screen selector in four directions. Pressing on the edge of the select buttons will cause the selector to move in the selected direction. Pressing the center of the select will activate the selected item.
Adjusting
buttons
"GD"
sliders
When menu items present a slider ( _ or _), use the select buttons (€ or _) to adjust the setting.
Jr Using your New TV Setting up the TV #utomatically The EASY SETUP GUIDE feature will allow you to set the on-screen language and set all receivable channels. The EASY SETUP GUIDE screen appear every time you turn on the TV until you perform AUTO PROGRAM.
Using
the buttons
NT
UP TV/VllOEO
•
- CHAM_L
,t
VOLUME+
POWER
1 Press POWER to turn on the "IV. The EASY SETUP GUIDE screen appears. "AUTO PROGRAM"
appears
and the TV
starts scanning and presetting channels POWER
automatically.Whenallthe receivablechannels
E.aL,S. : ESPA_IOL:
AUTO SET UP :
[VOL-]
DEMO :
[TVNIDEO]
First please connect the antenna. Press [SETUP]to exit.
To set up the TV manually, refer to "Using the SET UP menu" on page 16. "_
-VOLUME÷
AUTO PROGRAM
The EASY SETUP GUIDE feature does not apply for installations that use a cable box for all channel selection.
Tips
on the front of the TV:
2 (Except Canadian models)
Perform this function during the day, with the antenna and/or cableproperly amra_Ced,to ¢asure that all available dumnels are broadcastingand razivable.
• After using EASY SETUP GUIDE you will still have the option ofadjusting any ofthe system settings, likeerasing channels, through the SET UP menu (page16).
are stored, the lowest numbered displayed.
CABLE is set to ON automatically. To perform • Press
screens.
• Press Volume ("CONTINUE
+ orCHANNEL-
toselecta
language. -
to restore TO AUTO
will appear on the screen. execute or CH- to exit). • Press
Press VOLUME - to continue or TV/VIDEO for a DEMO of functions and menus.
SET UP again
SET UP.
• Press CHANNEL
• TheTVmustbesettoTVinputtoexecuteAUTO PROGRAM.PressANT untilthe channelnumberappa_.
3
AUTO
Press CHANNEL + to select English screens or CHANNEL - to select Spanish - CHANNEL +
channel is
If the TV receives cable TV channels,
factory settings PROGRAM?" Press
CH+ to
SET UP to exit.
Note: • When you perform AUTO PROGRAM, your CHANNEL FIX, TIMER, and CHANNEL BLOCK settings will be erased.
lil
Using your New
Watching
TV (continued)
the TV
All of the TV features can be accessed via the remote control. The following chart will explain the function of the buttons found on your remote control.
REFERTO THE ILLUSTRATION OF THE REMOTE CONTROL ON THE INSIDE FRONT COVER OF THIS MANUAL AS YOU REVIEW THIS CHART
TV (FUNCTION)
Activates the remote control for use with the TV.
TV POWER
Turns the TV on and off. If "VIDEO" appears on the screen, press TV/VIDEO or ANT so that a channel number appears.
@.
Use for direct channel selection. Press 0-9 to select a channel (for example, to select channel 10, press 1 and 0), the channel will change after 2 seconds, or you can press ENTER for immediate selection.
@
CH +/-
Press to scan through the channels (+ up or - down).
VOL +/-
Press to adjust the volume (+ up or - down).
JUMP
Press to alternate or jump back and forth between two channels. You can onlyjump between the last two channels that have been selected with the 0-9 keys.
MUTING
Press to mute the sound ("MUTING" will appear on the screen). Press again or press VOL + to restore sound.
SLEEP
Press repeatedly until the TV displays the approximate time in minutes (30, 60, or 90) that you want the TV to remain on before shutting off automatically. Cancel by pressing until "SLEEP OFF" appears.
10
DISPLAY
Press repeatedly to step through available displays: Status
CAPTION VISION TEXT 1 TEXT 2
Channel number, current time, channel caption (if set), and MTS mode (if SAP is selected) are displayed. SAP indication disappears after three seconds. XDS XDS (Extended Data Service) shows a network name, program name, program type, program length, call letters, and time of the show if the broadcaster offers this service. Caption Vision Caption Vision will be displayed on the screen if the broadcaster offers this service. (see right) To cancel the display, press DISPLAY repeatedly until =DISPLAY OFF" appears. =DISPLAY OFF" disappears after three seconds. TV/VlDEO
Press repeatedly to step through available video inputs: TV and Video 1 (KV-27S22, 29PS2, 29RS22, 29RS22C, 29SD2, 32S22 only) TV, Video I and Video 2 (KV-27V22, 29V22M only)
ANT
Press to change the input from VIDEO to regular (ANT) mode.
MTS/GUIDE
Press this buttonto cycle through the Multi-channel TV Sound (MTS) options. (page 14)
TEXT3 TEXT4 _MENU
UselIB(_D
Exit
Some programs are broadcast with Caption Vision. To display Caption Vision, select either CC1, CC2, CC3, CC4, TEXT1, TEXT2, TEXT3, or TEXT4 from the menu, then press DISPLAY until Caption Vision is displayed. CC1, CC2, CC3, or CC4 shows you a caption, that is, a printed version of the dialogue or sound effects of a program. (The mode should be set to CC1 for most programs) TEXT1, TEXT2, TEXT3, or TEXT4 shows you text, that is, information presented using either half or the whole screen. It is not usually related to the program. Notes: • Poor reception of TV programs can cause errors in Caption Vision and XDS. Captions may appear with a white box or other errors instead of intended text. • XDS, Caption Vision, and the status display cannot be used at the same time.
11
Adjusting Learning Use the MENU
your SET UP (menus) 3 Press the select buttons (# or #) to select
menu selection button
to access a menu
press (_
the desired option. and ,CHANNEL SET UP SET UP CHANNEL BLOCK FAVORITE CHANNEL VIDEO LABEL LANGUAGE: ENGLISH _MENU
1 Press the MENU button. appears.
Use m
[t)
CABLE:ON CHANNEL FIX: OFF AUTO PROGRAM CHANNEL ERASE/ADD CHANNEL CAPTION :)MENU
Exit
usem(33 PICTURE
HUE MODE : STANDARD COLOR
(_
BRIGHTNESS SHARPNESS
LIGHTSENSOR:ON :)MENU
4
Press
the select
buttons
highlight the desired to activate it.
(# or #) to
menu and press
SxRam
C_.
Options for your displayed.
selection
CHANNEL
Press
screen will reappear.
CHANNEL SET UP
MENU
2
to activate it.
The previous
use the Select buttons to alter settings. Use the following example to learn how to modify settings.
The main menu
5 Make your selection by pressing • or $, and
will be
SET UP
I, CABLE: OFF CHANNEL FIX: OFF AUTO PROGRAM CHANNEL ERASE/ADD CHANNEL CAPTION ;DMENU
UseI_BI-4q
When you are done with changes to the selected menu, choose MENU to return to the main menu. Once you have completed all menu corrections, press MENU on the remote control to exit the menu screens. SET UP _CHANNEL SET UP CHANNEL BLOCK FAVORITE CHANNEL VIDEO LABEL LANGUAGE: ENGLISH DMENU
Ex_l_l
SET UP SET UP CHANNEL BLOCK FAVORITE CHANNEL VIDEO LABEL LANGUAGE: ENGLISH :)MENU
Use _
12
_
Exit
useBB_
F.x,_
Note: • Pressing MENU on the remote control allow you to exit from the metals.
will
Using the VIDEO menu VIDEO MODE :STANDARD PICTURE HUE COLOR ; BRIGHTNESSI SHARPNESS LIGHTSENSOR: ON DMENU
Sliders
For detailed information on using the remote to modify menu settings, refer to "Learning menu selection" on page 12. To select Display
=_
the
VIDEO Highlight
_
menu:
{_} m=l),
Select
MODE Customized picture viewing
STANDARD: Select to display a standard picture. MOVIE: Select to display a finely detailed picture. SPORTS: Select to display a vivid, bright picture.
PICTURE PictureAdjustment
Adjust slider left (cursor down) to decrease picture contrast and soften the color. Adjust sliderright(cursorup) to increasepicturecontrastand create more vividcolor.
HUE PictureAdjustment
Adjust slider left (cursor down) to decrease the green tones. Adjust slider right(cursorup) to increase the green tones.
COLOR PictureAdjustment
Adjust slider left (cursor down) to decrease color intensity, Adjust slider right(cursorup) to increase color intensity,
BRIGHTNESS PictureAdjustment
Adjust slider left (cursor down) to darken the picture. Adjust slider right(cursorup) to brighten the picture.
SHARPNESS PictureAdjustment
Adjust slider left (cursor down) to soften the picture. Adjust slider right(cursorup) to sharpen the picture.
LIGHTSENSOR
(KV-27V22, 29V22M only) ON: TV automatically adjusts the brightness of the picture according to the brightness of the room. OFF: Brightness remains at preset value.
PictureAdjustment
ro restore the factory settings Press RESET on the remote control while the VIDEO menu is displayed.
13
Adjusting
your SET UP (menus)
.P Using the AUDIO
menu
(continued)
TREBLE Sound Adjustment
BASS BALANCE ,,m...b..,.,= EFFECT : SRS MTS : STEREO SPEAKER :OFF AUDIO OUT :VARIABLE DMENU Use []]_] _
Sliders
BASS Sound Adjustment
BALANCE Sound Adjustment
Customize
sound
For detailed information on using the remote to modify menu settings, refer to "Learning menu selection" on page 12.
program's audio type.
To select
MTS
Display
=rob
AUDIO Highlight
.P menu: ir _ arab
Select
MENU
5 To restore the factory settings Press RESET on the remote control while the AUDIO menu is displayed.
effect based on the
Enjoy stereo, bilingual and mono programs.
SPEAKER Custom selection of audio output source.
AUDIO OUT Easy control of volume adjustments.
Tip
Adjust slider left (cursor down) to decrease low pitched sounds. Adjust slider right (cursor up) to increase low pitched sounds. Adjust slider left (cursor down) to emphasize left speaker volume. Adjust slider right (cursor up) to emphasize right speaker volume.
Exit
EFFECT
the
Adjust slider left (cursor down) to decrease high pitched sounds. Adjust slider right (cursor up) to increase high pitched sounds.
"_"
Press (_ for direct selection of an EFPECT setting.
SURROUND: Simulates theater quality sound (only effective for stereo programs). (KV-27S22, 29PS2, 29RS22, 29RS22C, 29SD2, 32S22 only) SRS: Produces a dynamic three dimensional sound for stereo or encoded audio signals. (KV-27V22,29V22M only) SIMULATED: Addsa surround-likeeffectto mono programs.(KV-27V22,29V22M only) STEREO: Select for stereoreception when viewinga program broadcastin stereo. SAP: Select to listen to bilingual broadcast. (non-SAP programs will be muted when this feature is selected) MONO: Select for mono reception. (use to reduce noise during stereo broadcasts) Quick MTS access: Press MTS on your remote to cycle through the MTS options as follows: (STEREO ,_ SAP ,_ MONO ,_ STEREO) ON: Select to listento the sound from the TV speakersand a separatestereo system. OFF: Select to turn off the TV speakers and listen to the TV's sound only through external audio system speakers. AUDIO OUT can only be set when speakers are set to OFF. VARIABLE: Sound output varies according to the TV settings. Volume, Bass, Treble, and Balance are adjusted through the TV. Useful when you want to use your remote to control the output of a separate audio system. RXED: Sound output is held at a fixed level. Volume, Bass, Treble, arid Balance are fixed to the factory settings. Volume adjustments are made through your stereo.
Using the TIMER menu TIMER "_AVING:YES CURRENT TIME SET ON/OFF TIMER _MENU
DAYLIGHT SAVING Automatically adjusts thetime.
Spring: Select YES to compensate for Daylight Saving Time. The current time automatically moves ahead one hour. Fall: Select NO at the end of Daylight Saving Time. The current time moves back one hour."
CURRENT TIME SET Necessaryforthe TIMER.
CURRENT TIME SET window will appear. 1 Press • or _, on the select buttons until the current day (MON-SUN) is displayed. Press _ to select. 2 Press • or • on the select buttons until the current hour (01-12) and AM/PM is displayed. Press (_ to select. 3 Press • or • on the select buttons until the current
_After setting the clock you can use the timer to turn the "IV on and off. ! Tor detailed information on using the remote ito modify menu settings, refer to "Learning menu selection" on page 12. To select
the
TIMER
TIMER
Wake up or
Display _
_u
Highlight (_
mBik
Select
Set daylight saving time before setting the clock. Any loss of power will cause these settings to be erased.
TIME SET
I, ___ - -:_DMENU
- AM
Use _
_
Exit I_
ON/OFF
TIMER
minute (00-59) is displayed. 4 Press _. The Clock has now started. Press MENU to exit. ON/OFF
(_ menu:
CURRENT
scheduled viewing.
ON/OFF TIMER window will appear. 1 Press • or # on the select buttons until the desired day (MON-SUN) or range of days (EVERY SUN-SAT or EVERY MON-FRI) is displayed. Press (_ to select. 2 Indicate the time (hours then minutes) that you want the TV to turn on by pressing • or • and then (_). 3 Set the time duration (maximum of 6 hours) by pressing • or ,_ and then G_). TO CANCEL THE TIMER FUNCTION, PRESS RESET. 4 Press • or _, on the select buttons to select the desired
IP.... --:--
AM_h
CH ....
_MENU SUN
use_ (_
12:00 AM Exit
channel. Press _ to select. The timer is now set. The TIMER indicatoron yourTV willbe lit.PressMENU to exit. When you performAUTO PROGRAM, all TIMER settingswillbe erased. 15
iil
Adjusting
your SET UP (menus)
Using the SET UP menu SET UP
For detailed information on using the remote to modify menu settings, refer to "Learning menu selection" on page 12.
Display
the
SET UP _ Highlight
I_
CHANNEL BET UP Basic set up options for viewing
UP CHANNEL BLOCK FAVORITE CHANNEL VIDEO LABEL LANGUAGE: ENGLISH ;)MENU
To select
(continued)
menu: i=lb
Select
MENU
CHANNEL
CHANNEL ERASE/ADD: With the CHANNEL ERASE/ADD window open: CHANNEL ERASE/ADO 1 Place the cursor next to ERASE or ADD. 33 ADD _MENU
2 Select the desired channel using CH+/-, or by selecting with the 0-9 buttons and pressing ENTER.
IL_lO--O_ 10'I++'I I0 IMllld.l_
d_WWl
3 Press _
If any menu items are "grayed out", press the ANT button on your remote so that a channel number appears.
SET UP
With the CHANNEL SET UP window open: 1, CABLE: OFF 1 Use • or • to select the feature you want to change. CHANNEL RX: OFF 2 Press _ to access the feature. _MENU CABLE: Select ON if your TV is connected to a cable use_13_ Ex_ i system. (AUTO SET UP will set CABLE to ON automatically when it programs the TV) CHANNEL RX: Press _ and then use the • and t buttons to set ihe TV's input to one of the following op'dons: 2-6: Whenthe cableboxisconnectedtothe VHFMHF input.PressDBS/CABLE (FUNCTION)and thenCH+/- tochangechannels. VIDEO 1: When you have connected video equipment (e.g. A/V receiver) and you want the TV input fixed to it. You will be able to alternate between video sources. OFF: When you want to switch CHANNEL FIX off. TIMER and CHANNEL BLOCK settings willbe erased when CHANNEL FIX is set. AUTO PROGRAM: Instructsthe TV to automaticallyprogramall receivablechannels.
to activate.
CHANNEL CAPTION: With the CHANNEL CAPTION window open: I CHANNEL CAPTION 1 Press _ and then • or t on the select buttons to k
u_m_
---1
E_EJ
select the desired channel, and press (_ again. 2 Press • or 4 on the select buttons to display the first letter or number of the caption and press _ to select it. (Repeat until all four digits are selected) ,. 3 Press _ to activate. To erase a Caplion,press RESE'E.
CHANNEL BLOCK Preventchildaccess tocertainchannels.
FAVORITE CHANNEL Quickaccessto favoritechannels
VIDEO LABEL Easy recognitionof connected equipment (e.g.DBS, VHS,etc.).
LANGUAGE User'spreferred
With the CHANNEL BLOCK window open, you will be able to block two channels: 1 Select 1 or 2 and press (_. 2 Press • or + on the select buttons to display the channel you want to block. 3 Press _ to activate. When you select the blocked channel, "BLOCKED" will appear on the screen. Caption Vision, XDS, and output from the selected channel will also be blocked. To erase your CHANNEL BLOCK settings, press RESET while in the CHANNEL BLOCK window. When you perform AUTO PROGRAM, your CHANNEL BLOCK settings will be erased. Setting FAVORITE CHANNEL: With the FAVORITE CHANNEL window open: 1 Press _ and then 4, or + on the select buttons to select AUTO or MANUAL, and press _ again. (SelectingAUTO willcausethe lastfive channelsthat you chose withthe remote control0-9 buttonsto be selected) 2 Press t or + on the select buttons to select 1,2, 3, 4, or 5 and press (_. 3 Press 4, or + on the select buttons to select the desired channel and press _. Using FAVORITE CHANNEL: 1 Press (_, and your FAVORITE CHANNEL options appear. 2 Press t or _, to select the channel you want to watch, and press G_. This feature allows you to label each input mode so that you can easily identify the connected equipment (e.g. you can label VIDEO 1 IN as VHS). (KV-27V22, 29V22M only) 1 Press t or + on the select buttons to select the input mode you want to label and press CD. 2 Press • or • to select the label and press C_). VIDEO LABEL Options: Video 1: VHS, 8mm, BETA, LD, GAME, DBS, DVD, WEB, RECEIVER Video 2: VHS, 8ram, BETA, LD, GAME, DBS, DVD, WEB When VIDEO LABEL is set to WEB, the screen will darken significantly, creating an ideal picture for WebTV viewing. (Except Canadian models) Select from available languages to cause all menus to appear in your language of choice.
CHANNEL BLOCK 1,1. CH__2. CH___)MENU
Selecta program Use _
(3_
FAVORITE 1' MODE: 1....
Exit
CHANNEL MANUAL
_:;;Z 4 ....
Select
a position
Use Illtl _
Exit _]
VIDEO LABEL 1' VIDEO t: VIDEO 1 VIDEO 2: VIDEO 2 _MENU
Use _
_
Exit
g Operating Setting code
video equipment
the manufacturer's
You can use the supplied remote control to operate Sony or non-Sony video equipment that has an infrared sensor.
1
Press
2
Press VTR (FUNCTION).
CODE SET.
3 Use the 0-9 buttons to key in the manufacturer's code number from the following
4 Press
chart.
ENTER.
VCR manufacturer
code
numbers Manufacturer Sony Aiwa Admiral (M. Ward) Audio Dynamic Bell & Howell (M. Ward) Broksonic Canon Citizen Craig Criterion Curtis Mathis
Code 301,302, 303 338, 344 327 314, 337 330,343 319, 317 309, 308 332 315, 302, 332 315 304, 338, 309
Daewoo 341,312, 309 DBX 314, 336, 337 Dimensia 304 Emerson 319, 320,316, 317, 318,341 Fisher 330, 334, 335, 333 Funai 338 General Electric 329, 304, 309 Go Video 322 Goldstar 332 Hitachi 306, 304, 305, 338 Instant Replay 309, 308 JC Penney 309, 305, 304, 330, 314, 336, 337 JVC 314, 336, 337 Kenwood 314, 336, 332, 337 LXI (Sears) 332, 305, 333, 334, 330, 335, 338 Magnavox 308, 309, 310 Marantz 314, 336, 337 Marta 332 Memorex 309, 335 Minolta 305, 304 Mitsubishi/MGA 323, 324, 325, 326 Multitech 325, 338, 321 NEC 314, 336, 337 Olympic 309, 308 Optimus 327 Panasonic 308, 309, 306, 307 Pentax 305, 304 Philco 308, 309 Philips 308, 309, 310 Pioneer 308 Quasar 308, 309, 306 RCNPROSCAN 304, 305, 308, 309, 311, 312, 313, 310, 329 Realistic 309, 330,328, 335, 324, 338 Sansui 314
Singer 315 Samsung 322, 313, 321 Sanyo 330, 335 Scott 312, 313, 321,335, 323, 324, 325, 326 Sharp 327, 328 Shintom 315 Signature 2000 (M. Ward) 338, 327 Sylvania 308, 309, 338, 310 Symphonic 338 SV2000 338 Tashiro 332 Tatung 314, 336, 337 Teac 314, 336, 338, 337 Technics 309, 308 Toshiba 312, 311 Wards 327, 328, 335, 331,332 XR-1000 315 Yamaha 330, 314, 336, 337 Zenith 331
MDP manufacturer numbers Manufacturer Sony Kenwood Magnavox Marantz Mitsubishi Panasonic Philips Pioneer
code Code 701 707 703 702 702 704, 71o 703 702
RCA Sanyo
702,709 706
Operating a VCR
_harp _amaha
705 703,708
Buttons control
To turn on or off
Press VTR (POWER). Press the 0 - 9 buttons.
To select a channel directly Tips
""_
• In some rare cases, you may not be able to operate your non-Sony video equipment with the supplied remote control. In this case, please use the equipment's own remote control. •
The code numbers for Sony equipment are assigned at the factory as follows: VHS VCR
301 (preset code for the supplied remote control)
8 mm VCR
302
Beta, ED Beta VCRs
303
When you remove the batteries, the code number may revert to the factory setting.
on the remote
Operating
an MDP
To turn on or off
Buttons on the remote control
To play
Press VTR (POWER). Press the It,,-.
To stop
Press II.
To change channels
Press CH +/-.
To pause
To record
Press I_- while pressing 0. First release Imp,then release e.
Press II. To resume normal playback, press again.
To search the picture forward or backward
Keep pressing_ or
View more...
Comments
