Mounting an Ellipse bracket on a Dell Vostro 360 Computer

Mounting an Ellipse bracket on a Dell Vostro 360 Computer Lay the computer on its face

Remove 6 screws as indicated by the blue arrows. Remove the screws with a phillips head screwdriver.

Mounting an Ellipse bracket on a Dell Vostro 360 Computer Remove the Dell cover from the back of the computer. Note: It snaps off and on.

Remove the 2 screws holding the Dell kickstand in place. (Located on the right and left.)

Mounting an Ellipse bracket on a Dell Vostro 360 Computer Slide the bracket down towards the bottom of the computer and lift it up.

Replace the kickstand bracket with the one from the Ellipse system. Use the 2 screws that you removed from the left and right side of the other bracket.

Now reconnect the Dell cover onto the computer. Also replace the 6 screws that hold the back plate in place.